ACPI_STATUS
AcpiExStoreObjectToNode (
ACPI_OPERAND_OBJECT *SourceDesc,
ACPI_NAMESPACE_NODE *Node,
ACPI_WALK_STATE *WalkState,
UINT8 ImplicitConversion)
{
ACPI_STATUS Status = AE_OK;
ACPI_OPERAND_OBJECT *TargetDesc;
ACPI_OPERAND_OBJECT *NewDesc;
ACPI_OBJECT_TYPE TargetType;
ACPI_FUNCTION_TRACE_PTR (ExStoreObjectToNode, SourceDesc);
/* Get current type of the node, and object attached to Node */
TargetType = AcpiNsGetType (Node);
TargetDesc = AcpiNsGetAttachedObject (Node);
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Storing %p [%s] to node %p [%s]\n",
SourceDesc, AcpiUtGetObjectTypeName (SourceDesc),
Node, AcpiUtGetTypeName (TargetType)));
/* Only limited target types possible for everything except CopyObject */
if (WalkState->Opcode != AML_COPY_OBJECT_OP)
{
/*
* Only CopyObject allows all object types to be overwritten. For
* TargetRef(s), there are restrictions on the object types that
* are allowed.
*
* Allowable operations/typing for Store:
*
* 1) Simple Store
* Integer --> Integer (Named/Local/Arg)
* String --> String (Named/Local/Arg)
* Buffer --> Buffer (Named/Local/Arg)
* Package --> Package (Named/Local/Arg)
*
* 2) Store with implicit conversion
* Integer --> String or Buffer (Named)
* String --> Integer or Buffer (Named)
* Buffer --> Integer or String (Named)
*/
switch (TargetType)
{
case ACPI_TYPE_PACKAGE:
/*
* Here, can only store a package to an existing package.
* Storing a package to a Local/Arg is OK, and handled
* elsewhere.
*/
if (WalkState->Opcode == AML_STORE_OP)
{
if (SourceDesc->Common.Type != ACPI_TYPE_PACKAGE)
{
ACPI_ERROR ((AE_INFO,
"Cannot assign type [%s] to [Package] "
"(source must be type Pkg)",
AcpiUtGetObjectTypeName (SourceDesc)));
return_ACPI_STATUS (AE_AML_TARGET_TYPE);
}
break;
}
/* Fallthrough */
case ACPI_TYPE_DEVICE:
case ACPI_TYPE_EVENT:
case ACPI_TYPE_MUTEX:
case ACPI_TYPE_REGION:
case ACPI_TYPE_POWER:
case ACPI_TYPE_PROCESSOR:
case ACPI_TYPE_THERMAL:
ACPI_ERROR ((AE_INFO,
"Target must be [Buffer/Integer/String/Reference]"
", found [%s] (%4.4s)",
AcpiUtGetTypeName (Node->Type), Node->Name.Ascii));
return_ACPI_STATUS (AE_AML_TARGET_TYPE);
default:
break;
}
}
/*
* Resolve the source object to an actual value
* (If it is a reference object)
*/
Status = AcpiExResolveObject (&SourceDesc, TargetType, WalkState);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
/* Do the actual store operation */
switch (TargetType)
{
/*
* The simple data types all support implicit source operand
* conversion before the store.
*/
case ACPI_TYPE_INTEGER:
case ACPI_TYPE_STRING:
case ACPI_TYPE_BUFFER:
if ((WalkState->Opcode == AML_COPY_OBJECT_OP) ||
!ImplicitConversion)
{
/*
* However, CopyObject and Stores to ArgX do not perform
* an implicit conversion, as per the ACPI specification.
* A direct store is performed instead.
*/
Status = AcpiExStoreDirectToNode (SourceDesc, Node, WalkState);
break;
}
/* Store with implicit source operand conversion support */
Status = AcpiExStoreObjectToObject (SourceDesc, TargetDesc,
&NewDesc, WalkState);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
if (NewDesc != TargetDesc)
{
/*
* Store the new NewDesc as the new value of the Name, and set
* the Name's type to that of the value being stored in it.
* SourceDesc reference count is incremented by AttachObject.
*
* Note: This may change the type of the node if an explicit
* store has been performed such that the node/object type
* has been changed.
*/
Status = AcpiNsAttachObject (
Node, NewDesc, NewDesc->Common.Type);
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
"Store type [%s] into [%s] via Convert/Attach\n",
AcpiUtGetObjectTypeName (SourceDesc),
AcpiUtGetObjectTypeName (NewDesc)));
}
break;
case ACPI_TYPE_BUFFER_FIELD:
case ACPI_TYPE_LOCAL_REGION_FIELD:
case ACPI_TYPE_LOCAL_BANK_FIELD:
case ACPI_TYPE_LOCAL_INDEX_FIELD:
/*
* For all fields, always write the source data to the target
* field. Any required implicit source operand conversion is
* performed in the function below as necessary. Note, field
* objects must retain their original type permanently.
*/
Status = AcpiExWriteDataToField (SourceDesc, TargetDesc,
&WalkState->ResultObj);
break;
default:
/*
* CopyObject operator: No conversions for all other types.
* Instead, directly store a copy of the source object.
*
* This is the ACPI spec-defined behavior for the CopyObject
* operator. (Note, for this default case, all normal
* Store/Target operations exited above with an error).
*/
Status = AcpiExStoreDirectToNode (SourceDesc, Node, WalkState);
break;
}
return_ACPI_STATUS (Status);
}
ACPI_STATUS
AcpiExStoreObjectToNode (
ACPI_OPERAND_OBJECT *SourceDesc,
ACPI_NAMESPACE_NODE *Node,
ACPI_WALK_STATE *WalkState,
UINT8 ImplicitConversion)
{
ACPI_STATUS Status = AE_OK;
ACPI_OPERAND_OBJECT *TargetDesc;
ACPI_OPERAND_OBJECT *NewDesc;
ACPI_OBJECT_TYPE TargetType;
ACPI_FUNCTION_TRACE_PTR (ExStoreObjectToNode, SourceDesc);
/* Get current type of the node, and object attached to Node */
TargetType = AcpiNsGetType (Node);
TargetDesc = AcpiNsGetAttachedObject (Node);
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Storing %p (%s) to node %p (%s)\n",
SourceDesc, AcpiUtGetObjectTypeName (SourceDesc),
Node, AcpiUtGetTypeName (TargetType)));
/*
* Resolve the source object to an actual value
* (If it is a reference object)
*/
Status = AcpiExResolveObject (&SourceDesc, TargetType, WalkState);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
/* Do the actual store operation */
switch (TargetType)
{
case ACPI_TYPE_INTEGER:
case ACPI_TYPE_STRING:
case ACPI_TYPE_BUFFER:
/*
* The simple data types all support implicit source operand
* conversion before the store.
*/
if ((WalkState->Opcode == AML_COPY_OP) ||
!ImplicitConversion)
{
/*
* However, CopyObject and Stores to ArgX do not perform
* an implicit conversion, as per the ACPI specification.
* A direct store is performed instead.
*/
Status = AcpiExStoreDirectToNode (SourceDesc, Node,
WalkState);
break;
}
/* Store with implicit source operand conversion support */
Status = AcpiExStoreObjectToObject (SourceDesc, TargetDesc,
&NewDesc, WalkState);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
if (NewDesc != TargetDesc)
{
/*
* Store the new NewDesc as the new value of the Name, and set
* the Name's type to that of the value being stored in it.
* SourceDesc reference count is incremented by AttachObject.
*
* Note: This may change the type of the node if an explicit
* store has been performed such that the node/object type
* has been changed.
*/
Status = AcpiNsAttachObject (Node, NewDesc,
NewDesc->Common.Type);
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
"Store %s into %s via Convert/Attach\n",
AcpiUtGetObjectTypeName (SourceDesc),
AcpiUtGetObjectTypeName (NewDesc)));
}
break;
case ACPI_TYPE_BUFFER_FIELD:
case ACPI_TYPE_LOCAL_REGION_FIELD:
case ACPI_TYPE_LOCAL_BANK_FIELD:
case ACPI_TYPE_LOCAL_INDEX_FIELD:
/*
* For all fields, always write the source data to the target
* field. Any required implicit source operand conversion is
* performed in the function below as necessary. Note, field
* objects must retain their original type permanently.
*/
Status = AcpiExWriteDataToField (SourceDesc, TargetDesc,
&WalkState->ResultObj);
break;
default:
/*
* No conversions for all other types. Directly store a copy of
* the source object. This is the ACPI spec-defined behavior for
* the CopyObject operator.
*
* NOTE: For the Store operator, this is a departure from the
* ACPI spec, which states "If conversion is impossible, abort
* the running control method". Instead, this code implements
* "If conversion is impossible, treat the Store operation as
* a CopyObject".
*/
Status = AcpiExStoreDirectToNode (SourceDesc, Node,
WalkState);
break;
}
return_ACPI_STATUS (Status);
}
ACPI_STATUS
AcpiExStoreObjectToNode (
ACPI_OPERAND_OBJECT *SourceDesc,
ACPI_NAMESPACE_NODE *Node,
ACPI_WALK_STATE *WalkState,
UINT8 ImplicitConversion)
{
ACPI_STATUS Status = AE_OK;
ACPI_OPERAND_OBJECT *TargetDesc;
ACPI_OPERAND_OBJECT *NewDesc;
ACPI_OBJECT_TYPE TargetType;
ACPI_FUNCTION_TRACE_PTR (ExStoreObjectToNode, SourceDesc);
/* Get current type of the node, and object attached to Node */
TargetType = AcpiNsGetType (Node);
TargetDesc = AcpiNsGetAttachedObject (Node);
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Storing %p(%s) into node %p(%s)\n",
SourceDesc, AcpiUtGetObjectTypeName (SourceDesc),
Node, AcpiUtGetTypeName (TargetType)));
/*
* Resolve the source object to an actual value
* (If it is a reference object)
*/
Status = AcpiExResolveObject (&SourceDesc, TargetType, WalkState);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
/* If no implicit conversion, drop into the default case below */
if ((!ImplicitConversion) ||
((WalkState->Opcode == AML_COPY_OP) &&
(TargetType != ACPI_TYPE_LOCAL_REGION_FIELD) &&
(TargetType != ACPI_TYPE_LOCAL_BANK_FIELD) &&
(TargetType != ACPI_TYPE_LOCAL_INDEX_FIELD)))
{
/*
* Force execution of default (no implicit conversion). Note:
* CopyObject does not perform an implicit conversion, as per the ACPI
* spec -- except in case of region/bank/index fields -- because these
* objects must retain their original type permanently.
*/
TargetType = ACPI_TYPE_ANY;
}
/* Do the actual store operation */
switch (TargetType)
{
case ACPI_TYPE_BUFFER_FIELD:
case ACPI_TYPE_LOCAL_REGION_FIELD:
case ACPI_TYPE_LOCAL_BANK_FIELD:
case ACPI_TYPE_LOCAL_INDEX_FIELD:
/* For fields, copy the source data to the target field. */
Status = AcpiExWriteDataToField (SourceDesc, TargetDesc,
&WalkState->ResultObj);
break;
case ACPI_TYPE_INTEGER:
case ACPI_TYPE_STRING:
case ACPI_TYPE_BUFFER:
/*
* These target types are all of type Integer/String/Buffer, and
* therefore support implicit conversion before the store.
*
* Copy and/or convert the source object to a new target object
*/
Status = AcpiExStoreObjectToObject (SourceDesc, TargetDesc,
&NewDesc, WalkState);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
if (NewDesc != TargetDesc)
{
/*
* Store the new NewDesc as the new value of the Name, and set
* the Name's type to that of the value being stored in it.
* SourceDesc reference count is incremented by AttachObject.
*
* Note: This may change the type of the node if an explicit store
* has been performed such that the node/object type has been
* changed.
*/
Status = AcpiNsAttachObject (Node, NewDesc, NewDesc->Common.Type);
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
"Store %s into %s via Convert/Attach\n",
AcpiUtGetObjectTypeName (SourceDesc),
AcpiUtGetObjectTypeName (NewDesc)));
}
break;
default:
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
"Storing %s (%p) directly into node (%p) with no implicit conversion\n",
AcpiUtGetObjectTypeName (SourceDesc), SourceDesc, Node));
/* No conversions for all other types. Just attach the source object */
Status = AcpiNsAttachObject (Node, SourceDesc,
SourceDesc->Common.Type);
break;
}
return_ACPI_STATUS (Status);
}
