ACPI_STATUS
AcpiEnableAllRuntimeGpes (
void)
{
ACPI_STATUS Status;
ACPI_FUNCTION_TRACE (AcpiEnableAllRuntimeGpes);
Status = AcpiUtAcquireMutex (ACPI_MTX_EVENTS);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
Status = AcpiHwEnableAllRuntimeGpes ();
(void) AcpiUtReleaseMutex (ACPI_MTX_EVENTS);
return_ACPI_STATUS (Status);
}
ACPI_STATUS
AcpiHwLegacyWake (
UINT8 SleepState)
{
ACPI_STATUS Status;
ACPI_FUNCTION_TRACE (HwLegacyWake);
/* Ensure EnterSleepStatePrep -> EnterSleepState ordering */
AcpiGbl_SleepTypeA = ACPI_SLEEP_TYPE_INVALID;
AcpiHwExecuteSleepMethod (__UNCONST(METHOD_PATHNAME__SST), ACPI_SST_WAKING);
/*
* GPEs must be enabled before _WAK is called as GPEs
* might get fired there
*
* Restore the GPEs:
* 1) Disable/Clear all GPEs
* 2) Enable all runtime GPEs
*/
Status = AcpiHwDisableAllGpes ();
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
Status = AcpiHwEnableAllRuntimeGpes ();
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
/*
* Now we can execute _WAK, etc. Some machines require that the GPEs
* are enabled before the wake methods are executed.
*/
AcpiHwExecuteSleepMethod (__UNCONST(METHOD_PATHNAME__WAK), SleepState);
/*
* Some BIOS code assumes that WAK_STS will be cleared on resume
* and use it to determine whether the system is rebooting or
* resuming. Clear WAK_STS for compatibility.
*/
(void) AcpiWriteBitRegister (ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS);
AcpiGbl_SystemAwakeAndRunning = TRUE;
/* Enable power button */
(void) AcpiWriteBitRegister(
AcpiGbl_FixedEventInfo[ACPI_EVENT_POWER_BUTTON].EnableRegisterId,
ACPI_ENABLE_EVENT);
(void) AcpiWriteBitRegister(
AcpiGbl_FixedEventInfo[ACPI_EVENT_POWER_BUTTON].StatusRegisterId,
ACPI_CLEAR_STATUS);
AcpiHwExecuteSleepMethod (__UNCONST(METHOD_PATHNAME__SST), ACPI_SST_WORKING);
return_ACPI_STATUS (Status);
}
ACPI_STATUS
AcpiLeaveSleepState (
UINT8 SleepState)
{
ACPI_OBJECT_LIST ArgList;
ACPI_OBJECT Arg;
ACPI_STATUS Status;
ACPI_BIT_REGISTER_INFO *SleepTypeRegInfo;
ACPI_BIT_REGISTER_INFO *SleepEnableRegInfo;
UINT32 Pm1aControl;
UINT32 Pm1bControl;
ACPI_FUNCTION_TRACE (AcpiLeaveSleepState);
/*
* Set SLP_TYPE and SLP_EN to state S0.
* This is unclear from the ACPI Spec, but it is required
* by some machines.
*/
Status = AcpiGetSleepTypeData (ACPI_STATE_S0,
&AcpiGbl_SleepTypeA, &AcpiGbl_SleepTypeB);
if (ACPI_SUCCESS (Status))
{
SleepTypeRegInfo =
AcpiHwGetBitRegisterInfo (ACPI_BITREG_SLEEP_TYPE);
SleepEnableRegInfo =
AcpiHwGetBitRegisterInfo (ACPI_BITREG_SLEEP_ENABLE);
/* Get current value of PM1A control */
Status = AcpiHwRegisterRead (ACPI_REGISTER_PM1_CONTROL,
&Pm1aControl);
if (ACPI_SUCCESS (Status))
{
/* Clear the SLP_EN and SLP_TYP fields */
Pm1aControl &= ~(SleepTypeRegInfo->AccessBitMask |
SleepEnableRegInfo->AccessBitMask);
Pm1bControl = Pm1aControl;
/* Insert the SLP_TYP bits */
Pm1aControl |= (AcpiGbl_SleepTypeA <<
SleepTypeRegInfo->BitPosition);
Pm1bControl |= (AcpiGbl_SleepTypeB <<
SleepTypeRegInfo->BitPosition);
/* Write the control registers and ignore any errors */
(void) AcpiHwWritePm1Control (Pm1aControl, Pm1bControl);
}
}
/* Ensure EnterSleepStatePrep -> EnterSleepState ordering */
AcpiGbl_SleepTypeA = ACPI_SLEEP_TYPE_INVALID;
/* Setup parameter object */
ArgList.Count = 1;
ArgList.Pointer = &Arg;
Arg.Type = ACPI_TYPE_INTEGER;
/* Ignore any errors from these methods */
Arg.Integer.Value = ACPI_SST_WAKING;
Status = AcpiEvaluateObject (NULL, METHOD_NAME__SST, &ArgList, NULL);
if (ACPI_FAILURE (Status) && Status != AE_NOT_FOUND)
{
ACPI_EXCEPTION ((AE_INFO, Status, "During Method _SST"));
}
Arg.Integer.Value = SleepState;
Status = AcpiEvaluateObject (NULL, METHOD_NAME__BFS, &ArgList, NULL);
if (ACPI_FAILURE (Status) && Status != AE_NOT_FOUND)
{
ACPI_EXCEPTION ((AE_INFO, Status, "During Method _BFS"));
}
Status = AcpiEvaluateObject (NULL, METHOD_NAME__WAK, &ArgList, NULL);
if (ACPI_FAILURE (Status) && Status != AE_NOT_FOUND)
{
ACPI_EXCEPTION ((AE_INFO, Status, "During Method _WAK"));
}
/* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */
/*
* Restore the GPEs:
* 1) Disable/Clear all GPEs
* 2) Enable all runtime GPEs
*/
Status = AcpiHwDisableAllGpes ();
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
AcpiGbl_SystemAwakeAndRunning = TRUE;
Status = AcpiHwEnableAllRuntimeGpes ();
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
/* Enable power button */
(void) AcpiWriteBitRegister(
AcpiGbl_FixedEventInfo[ACPI_EVENT_POWER_BUTTON].EnableRegisterId,
ACPI_ENABLE_EVENT);
(void) AcpiWriteBitRegister(
AcpiGbl_FixedEventInfo[ACPI_EVENT_POWER_BUTTON].StatusRegisterId,
ACPI_CLEAR_STATUS);
/*
* Enable BM arbitration. This feature is contained within an
* optional register (PM2 Control), so ignore a BAD_ADDRESS
* exception.
*/
Status = AcpiWriteBitRegister (ACPI_BITREG_ARB_DISABLE, 0);
if (ACPI_FAILURE (Status) && (Status != AE_BAD_ADDRESS))
{
return_ACPI_STATUS (Status);
}
Arg.Integer.Value = ACPI_SST_WORKING;
Status = AcpiEvaluateObject (NULL, METHOD_NAME__SST, &ArgList, NULL);
if (ACPI_FAILURE (Status) && Status != AE_NOT_FOUND)
{
ACPI_EXCEPTION ((AE_INFO, Status, "During Method _SST"));
}
return_ACPI_STATUS (Status);
}
