void SampleListing::CreateListing()
{
StdTitle("Uncertainty Propogation Setup");
ClearEnumStrs();
AddEnumStr("Monte Carlo", utMonteCarlo);
AddEnumStr("FOSM", utFOSM);
AddEnumStr("PEM", utPEM);
AddStdEnum("Uncertainty", uncertType);
AddBoolText("Unspecified correlations", forceCorrelationsToZero, "Force to 0.0", "Random");
if (IsMonteCarlo())
{
AddBoolText("Sampling procedure", samplingIsLHS, "Latin Hyper-Cube", "Monte-Carlo");
AddStdInt("Number of trials", numberOfTrials);
AddStdInt("Random number seed", randSeed);
AddYesNo("User-specified correlations ?", specifyCorrelations);
}
else if (IsFOSM())
{
AddBoolText("Derivative Span", calcDerivSpan, "Calculated", "User-Specified");
if (calcDerivSpan)
AddStdReal("Initial Derivative Span", derivSpan);
else
AddStdReal("Specified Derivative Span", derivSpan);
}
AddStdInt("# of sampled variables", SampVar::GetnActive());
SC_SetupErr tempErr;
SampVarArray currSamp;
for (int i = 0; i < currSamp.Size(); i++)
AddStatus(currSamp[i]->GetLongID(), currSamp[i]->SampleSetupOK(tempErr));
}
void LayerListing::CreateListing()
{
StdTitle("Multiple Layer Specification");
AddBoolText("Layer depth specification", enterLayerDepths, "Depth BGS", "Elevation ASL");
const char* titleStr;
UnitReal currThick;
if (enterLayerDepths)
{
titleStr = "Depth";
AddUnitReal("Depth of system bottom", bottomLayerDepth);
currThick = bottomLayerDepth;
}
else
{
titleStr = "Elevation";
AddUnitReal("Elevation of system bottom", bottomLayerElevation);
currThick = bottomLayerElevation;
}
char unitStr[40];
currThick.MakeUnitString(unitStr, 40);
LayerStaticSupport::GeoLayerCleanup();
SubTitle("Geology Layers");
SC_IntArray colWidth(7, 15);
SC_BoolArray leftJust(7, false);
colWidth[0] = 20;
leftJust[0] = true;
TableSetup(colWidth, leftJust, 1, 0);
SetTableCol("ID", titleStr, "Thickness", "Skin?", "Conductivity", "# nodes");
SetTableCol(1, unitStr);
SetTableCol(2, unitStr);
AddNextLine();
AddNextLine();
char tempStr[80];
for (int i = 0; i < geologyLayers.Size(); i++)
{
GeologyLayer& currLayer = geologyLayers[i];
SetTableCol(0, currLayer.intervalID);
currLayer.GetUserDepthString(tempStr, 80);
SetTableCol(1, tempStr);
currLayer.GetUserThickString(tempStr, 80);
SetTableCol(2, tempStr);
SetTableBool(3, currLayer.layerHasSkin, "Skin", "No Skin");
SetTableBool(4, currLayer.layerIsIsotropic, "Isotropic", "Anisotropic");
SetTableInt(5, currLayer.nintervalNodes);
AddNextLine();
}
SubTitle("Wellbore Zones");
LayerStaticSupport::WellBoreZoneCleanup();
colWidth.SetSize(7);
leftJust.SetSize(7);
TableSetup(colWidth, leftJust, 1, 0);
SetTableCol("ID", titleStr, "Thickness", "Type", "Delta Volume", "TZ Comp", "# nodes");
SetTableCol(1, unitStr);
SetTableCol(2, unitStr);
char deltaVolUnitStr[40];
wellboreZoneDeltaVolumeUnits.MakeUnitString(deltaVolUnitStr, 40);
SetTableCol(4, unitStr);
char tzCompUnitStr[40];
wellboreZoneTZCompUnits.MakeUnitString(tzCompUnitStr, 40);
SetTableCol(5, unitStr);
AddNextLine();
AddNextLine();
for (int i = 0; i < wellBoreZones.Size(); i++)
{
WellBoreZone& currZone = wellBoreZones[i];
SetTableCol(0, currZone.intervalID);
currZone.GetUserDepthString(tempStr, 80);
SetTableCol(1, tempStr);
currZone.GetUserThickString(tempStr, 80);
SetTableCol(2, tempStr);
SetTableBool(3, currZone.zoneIsPacker, "Packer", "Zone");
if (currZone.zoneIsPacker)
{
SetTableCol(4, "n/a");
SetTableCol(5, "n/a");
}
else
{
currZone.GetUserDeltaVolumeString(tempStr, 80);
SetTableCol(4, tempStr);
currZone.GetUserTZCompString(tempStr, 80);
SetTableCol(5, tempStr);
}
SetTableInt(6, currZone.nintervalNodes);
AddNextLine();
}
}
void DataCaptureListing::ListDataCapture(const DataCaptureSpec& outDC)
{
AddConditionalBlank();
AddStdText("Output ID", outDC.dataDesig);
ClearEnumStrs();
AddEnumStr("Pressure", DataCaptureSpec::ctPressure);
AddEnumStr("Flow Rate", DataCaptureSpec::ctFlow);
AddEnumStr("Cumulative Production", DataCaptureSpec::ctProduction);
AddEnumStr("Test Zone Property", DataCaptureSpec::ctTestZone);
AddEnumStr("Water Table", DataCaptureSpec::ctWaterTable);
AddStdEnum(" Output type", outDC.captureType);
ClearEnumStrs();
switch (outDC.captureType)
{
case DataCaptureSpec::ctPressure : {
AddEnumStr("Test Zone", DataCaptureSpec::pctTestZone);
AddEnumStr("Observation Well", DataCaptureSpec::pctRadius);
AddEnumStr("Superposition", DataCaptureSpec::pctSuperposition);
AddStdEnum(" Pressure capture type", outDC.pressureCapType);
switch (outDC.pressureCapType)
{
case DataCaptureSpec::pctTestZone : {
if (control.IsLayered())
{
AddStdText("Wellbore zone", outDC.wellboreZoneID);
}
break;
}
case DataCaptureSpec::pctRadius : {
if (control.IsHorizontalAnisotropic())
{
AddUnitReal(" Observation well X location", outDC.obsXLocation);
AddUnitReal(" Observation well Y location", outDC.obsYLocation);
AddStdReal(" Observation well angle (degrees)", Degrees(outDC.GetObsAngle()), SC_DecFormat(3));
}
AddUnitReal(" Observation well radius", outDC.radiusData);
if (control.Is2DRadial())
{
AddBoolText(" Vertical position", outDC.zvalueIsRatio, "Actual", "Ratio");
if (outDC.zvalueIsRatio)
AddStdReal(" Vertical ratio", outDC.normalizedZ, SC_DecFormat(3));
else
AddUnitReal(" Vertical offset", outDC.actualZ);
}
break;
}
case DataCaptureSpec::pctSuperposition : {
for (int i = 0; i < outDC.superData.Size(); i++)
if (outDC.superData.IsValid(i))
ListSuperComponent(outDC.superData.GetRef(i));
break;
}
}
break;
}
case DataCaptureSpec::ctFlow : {
AddEnumStr("Well", DataCaptureSpec::fctWell);
AddEnumStr("Formation", DataCaptureSpec::fctFormation);
AddEnumStr("Test Zone", DataCaptureSpec::fctTestZone);
AddEnumStr("Wellbore Storage", DataCaptureSpec::fctWellboreStorage);
AddStdEnum(" Flow rate output type", outDC.flowCapType);
break;
}
case DataCaptureSpec::ctProduction : {
AddEnumStr("Well", DataCaptureSpec::prctWell);
AddEnumStr("Formation", DataCaptureSpec::prctFormation);
AddEnumStr("Test Zone", DataCaptureSpec::prctTestZone);
AddStdEnum(" Production output type", outDC.flowCapType);
break;
}
case DataCaptureSpec::ctTestZone : {
AddEnumStr("Temperature", DataCaptureSpec::tzctTemperature);
AddEnumStr("Compressibility", DataCaptureSpec::tzctCompressibility);
AddEnumStr("Volume", DataCaptureSpec::tzctVolume);
AddStdEnum(" Test zone property output type", outDC.flowCapType);
break;
}
case DataCaptureSpec::ctWaterTable : {
AddUnitReal(" Water table radius", outDC.radiusData);
break;
}
}
AddUnitIndex(" Output units", outDC.outputUnits);
}
