Beispiel #1
0
/**
  This function processes the results of changes in configuration.


  @param This               Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
  @param Action             Specifies the type of action taken by the browser.
  @param QuestionId         A unique value which is sent to the original exporting driver
                            so that it can identify the type of data to expect.
  @param Type               The type of value for the question.
  @param Value              A pointer to the data being sent to the original exporting driver.
  @param ActionRequest      On return, points to the action requested by the callback function.

  @retval EFI_SUCCESS           The callback successfully handled the action.
  @retval EFI_OUT_OF_RESOURCES  Not enough storage is available to hold the variable and its data.
  @retval EFI_DEVICE_ERROR      The variable could not be saved.
  @retval EFI_UNSUPPORTED       The specified Action is not supported by the callback.
  @retval EFI_INVALID_PARAMETER The parameter of Value or ActionRequest is invalid.
**/
EFI_STATUS
EFIAPI
BootMaintCallback (
  IN  CONST EFI_HII_CONFIG_ACCESS_PROTOCOL         *This,
  IN        EFI_BROWSER_ACTION                     Action,
  IN        EFI_QUESTION_ID                        QuestionId,
  IN        UINT8                                  Type,
  IN        EFI_IFR_TYPE_VALUE                     *Value,
  OUT       EFI_BROWSER_ACTION_REQUEST             *ActionRequest
  )
{
  BMM_CALLBACK_DATA *Private;
  BM_MENU_ENTRY     *NewMenuEntry;
  BMM_FAKE_NV_DATA  *CurrentFakeNVMap;
  EFI_STATUS        Status;
  UINTN             OldValue;
  UINTN             NewValue;
  UINTN             Number;
  UINTN             Pos;
  UINTN             Bit;
  UINT16            NewValuePos;
  UINT16            Index3;  
  UINT16            Index2;
  UINT16            Index;
  UINT8             *OldLegacyDev;
  UINT8             *NewLegacyDev;
  UINT8             *DisMap;

  if (Action != EFI_BROWSER_ACTION_CHANGING && Action != EFI_BROWSER_ACTION_CHANGED) {    
    //
    // All other action return unsupported.
    //
    return EFI_UNSUPPORTED;
  }
  
  Status       = EFI_SUCCESS;
  OldValue     = 0;
  NewValue     = 0;
  Number       = 0;
  OldLegacyDev = NULL;
  NewLegacyDev = NULL;
  NewValuePos  = 0;
  DisMap       = NULL;

  Private      = BMM_CALLBACK_DATA_FROM_THIS (This);
  //
  // Retrive uncommitted data from Form Browser
  //
  CurrentFakeNVMap = &Private->BmmFakeNvData;
  HiiGetBrowserData (&gBootMaintFormSetGuid, mBootMaintStorageName, sizeof (BMM_FAKE_NV_DATA), (UINT8 *) CurrentFakeNVMap);
  if (Action == EFI_BROWSER_ACTION_CHANGING) {
    if (Value == NULL) {
      return EFI_INVALID_PARAMETER;
    }
    
    UpdatePageId (Private, QuestionId);

    //
    // need to be subtituded.
    //
    // Update Select FD/HD/CD/NET/BEV Order Form
    //
    if ((QuestionId >= LEGACY_FD_QUESTION_ID) && (QuestionId < LEGACY_BEV_QUESTION_ID + MAX_MENU_NUMBER)) {

      DisMap  = Private->BmmOldFakeNVData.DisableMap;

      if (QuestionId >= LEGACY_FD_QUESTION_ID && QuestionId < LEGACY_FD_QUESTION_ID + MAX_MENU_NUMBER) {
        Number        = (UINT16) LegacyFDMenu.MenuNumber;
        OldLegacyDev  = Private->BmmOldFakeNVData.LegacyFD;
        NewLegacyDev  = CurrentFakeNVMap->LegacyFD;
      } else if (QuestionId >= LEGACY_HD_QUESTION_ID && QuestionId < LEGACY_HD_QUESTION_ID + MAX_MENU_NUMBER) {
        Number        = (UINT16) LegacyHDMenu.MenuNumber;
        OldLegacyDev  = Private->BmmOldFakeNVData.LegacyHD;
        NewLegacyDev  = CurrentFakeNVMap->LegacyHD;
      } else if (QuestionId >= LEGACY_CD_QUESTION_ID && QuestionId < LEGACY_CD_QUESTION_ID + MAX_MENU_NUMBER) {
        Number        = (UINT16) LegacyCDMenu.MenuNumber;
        OldLegacyDev  = Private->BmmOldFakeNVData.LegacyCD;
        NewLegacyDev  = CurrentFakeNVMap->LegacyCD;
      } else if (QuestionId >= LEGACY_NET_QUESTION_ID && QuestionId < LEGACY_NET_QUESTION_ID + MAX_MENU_NUMBER) {
        Number        = (UINT16) LegacyNETMenu.MenuNumber;
        OldLegacyDev  = Private->BmmOldFakeNVData.LegacyNET;
        NewLegacyDev  = CurrentFakeNVMap->LegacyNET;
      } else if (QuestionId >= LEGACY_BEV_QUESTION_ID && QuestionId < LEGACY_BEV_QUESTION_ID + MAX_MENU_NUMBER) {
        Number        = (UINT16) LegacyBEVMenu.MenuNumber;
        OldLegacyDev  = Private->BmmOldFakeNVData.LegacyBEV;
        NewLegacyDev  = CurrentFakeNVMap->LegacyBEV;
      }
      //
      //  First, find the different position
      //  if there is change, it should be only one
      //
      for (Index = 0; Index < Number; Index++) {
        if (OldLegacyDev[Index] != NewLegacyDev[Index]) {
          OldValue  = OldLegacyDev[Index];
          NewValue  = NewLegacyDev[Index];
          break;
        }
      }

      if (Index != Number) {
        //
        // there is change, now process
        //
        if (0xFF == NewValue) {
          //
          // This item will be disable
          // Just move the items behind this forward to overlap it
          //
          Pos = OldValue / 8;
          Bit = 7 - (OldValue % 8);
          DisMap[Pos] = (UINT8) (DisMap[Pos] | (UINT8) (1 << Bit));
          for (Index2 = Index; Index2 < Number - 1; Index2++) {
            NewLegacyDev[Index2] = NewLegacyDev[Index2 + 1];
          }

          NewLegacyDev[Index2] = 0xFF;
        } else {
          for (Index2 = 0; Index2 < Number; Index2++) {
            if (Index2 == Index) {
              continue;
            }

            if (OldLegacyDev[Index2] == NewValue) {
              //
              // If NewValue is in OldLegacyDev array
              // remember its old position
              //
              NewValuePos = Index2;
              break;
            }
          }

          if (Index2 != Number) {
            //
            // We will change current item to an existing item
            // (It's hard to describe here, please read code, it's like a cycle-moving)
            //
            for (Index2 = NewValuePos; Index2 != Index;) {
              if (NewValuePos < Index) {
                NewLegacyDev[Index2] = OldLegacyDev[Index2 + 1];
                Index2++;
              } else {
                NewLegacyDev[Index2] = OldLegacyDev[Index2 - 1];
                Index2--;
              }
            }
          } else {
            //
            // If NewValue is not in OldlegacyDev array, we are changing to a disabled item
            // so we should modify DisMap to reflect the change
            //
            Pos = NewValue / 8;
            Bit = 7 - (NewValue % 8);
            DisMap[Pos] = (UINT8) (DisMap[Pos] & (~ (UINT8) (1 << Bit)));
            if (0xFF != OldValue) {
              //
              // Because NewValue is a item that was disabled before
              // so after changing the OldValue should be disabled
              // actually we are doing a swap of enable-disable states of two items
              //
              Pos = OldValue / 8;
              Bit = 7 - (OldValue % 8);
              DisMap[Pos] = (UINT8) (DisMap[Pos] | (UINT8) (1 << Bit));
            }
          }
        }
        //
        // To prevent DISABLE appears in the middle of the list
        // we should perform a re-ordering
        //
        Index3 = Index;
        Index = 0;
        while (Index < Number) {
          if (0xFF != NewLegacyDev[Index]) {
            Index++;
            continue;
          }

          Index2 = Index;
          Index2++;
          while (Index2 < Number) {
            if (0xFF != NewLegacyDev[Index2]) {
              break;
            }

            Index2++;
          }

          if (Index2 < Number) {
            NewLegacyDev[Index]   = NewLegacyDev[Index2];
            NewLegacyDev[Index2]  = 0xFF;
          }

          Index++;
        }

        CopyMem (
          OldLegacyDev,
          NewLegacyDev,
          Number
          );

        //
        //  Return correct question value.
        //
        Value->u8 = NewLegacyDev[Index3];
      }
    }

    if (QuestionId < FILE_OPTION_OFFSET) {
      if (QuestionId < CONFIG_OPTION_OFFSET) {
        switch (QuestionId) {
        case KEY_VALUE_BOOT_FROM_FILE:
          Private->FeCurrentState = FileExplorerStateBootFromFile;
          break;

        case FORM_BOOT_ADD_ID:
          Private->FeCurrentState = FileExplorerStateAddBootOption;
          break;

        case FORM_DRV_ADD_FILE_ID:
          Private->FeCurrentState = FileExplorerStateAddDriverOptionState;
          break;

        case FORM_DRV_ADD_HANDLE_ID:
          CleanUpPage (FORM_DRV_ADD_HANDLE_ID, Private);
          UpdateDrvAddHandlePage (Private);
          break;

        case FORM_BOOT_DEL_ID:
          CleanUpPage (FORM_BOOT_DEL_ID, Private);
          UpdateBootDelPage (Private);
          break;

        case FORM_BOOT_CHG_ID:
        case FORM_DRV_CHG_ID:
          UpdatePageBody (QuestionId, Private);
          break;

        case FORM_DRV_DEL_ID:
          CleanUpPage (FORM_DRV_DEL_ID, Private);
          UpdateDrvDelPage (Private);
          break;

        case FORM_BOOT_NEXT_ID:
          CleanUpPage (FORM_BOOT_NEXT_ID, Private);
          UpdateBootNextPage (Private);
          break;

        case FORM_TIME_OUT_ID:
          CleanUpPage (FORM_TIME_OUT_ID, Private);
          UpdateTimeOutPage (Private);
          break;

        case FORM_CON_IN_ID:
        case FORM_CON_OUT_ID:
        case FORM_CON_ERR_ID:
          UpdatePageBody (QuestionId, Private);
          break;

        case FORM_CON_MODE_ID:
          CleanUpPage (FORM_CON_MODE_ID, Private);
          UpdateConModePage (Private);
          break;

        case FORM_CON_COM_ID:
          CleanUpPage (FORM_CON_COM_ID, Private);
          UpdateConCOMPage (Private);
          break;

        case FORM_SET_FD_ORDER_ID:
        case FORM_SET_HD_ORDER_ID:
        case FORM_SET_CD_ORDER_ID:
        case FORM_SET_NET_ORDER_ID:
        case FORM_SET_BEV_ORDER_ID:
          CleanUpPage (QuestionId, Private);
          UpdateSetLegacyDeviceOrderPage (QuestionId, Private);
          break;

        default:
          break;
        }
      } else if ((QuestionId >= TERMINAL_OPTION_OFFSET) && (QuestionId < CONSOLE_OPTION_OFFSET)) {
        Index2                    = (UINT16) (QuestionId - TERMINAL_OPTION_OFFSET);
        Private->CurrentTerminal  = Index2;

        CleanUpPage (FORM_CON_COM_SETUP_ID, Private);
        UpdateTerminalPage (Private);

      } else if (QuestionId >= HANDLE_OPTION_OFFSET) {
        Index2                  = (UINT16) (QuestionId - HANDLE_OPTION_OFFSET);

        NewMenuEntry            = BOpt_GetMenuEntry (&DriverMenu, Index2);
        ASSERT (NewMenuEntry != NULL);
        Private->HandleContext  = (BM_HANDLE_CONTEXT *) NewMenuEntry->VariableContext;

        CleanUpPage (FORM_DRV_ADD_HANDLE_DESC_ID, Private);

        Private->MenuEntry                  = NewMenuEntry;
        Private->LoadContext->FilePathList  = Private->HandleContext->DevicePath;

        UpdateDriverAddHandleDescPage (Private);
      }
    }
  } else if (Action == EFI_BROWSER_ACTION_CHANGED) {
    if ((Value == NULL) || (ActionRequest == NULL)) {
      return EFI_INVALID_PARAMETER;
    }
    
    switch (QuestionId) {
    case KEY_VALUE_SAVE_AND_EXIT:
    case KEY_VALUE_NO_SAVE_AND_EXIT:
      if (QuestionId == KEY_VALUE_SAVE_AND_EXIT) {
        Status = ApplyChangeHandler (Private, CurrentFakeNVMap, Private->BmmPreviousPageId);
        if (EFI_ERROR (Status)) {
          return Status;
        }
      } else if (QuestionId == KEY_VALUE_NO_SAVE_AND_EXIT) {
        DiscardChangeHandler (Private, CurrentFakeNVMap);
      }

      //
      // Tell browser not to ask for confirmation of changes,
      // since we have already applied or discarded.
      //
      *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_SUBMIT_EXIT;
      break;  

    case FORM_RESET:
      gRT->ResetSystem (EfiResetCold, EFI_SUCCESS, 0, NULL);
      return EFI_UNSUPPORTED;

    default:
      break;
    }
  }

  //
  // Pass changed uncommitted data back to Form Browser
  //
  HiiSetBrowserData (&gBootMaintFormSetGuid, mBootMaintStorageName, sizeof (BMM_FAKE_NV_DATA), (UINT8 *) CurrentFakeNVMap, NULL);
  return EFI_SUCCESS;
}
Beispiel #2
0
/**
  This function allows a caller to extract the current configuration for one
  or more named elements from the target driver.


  @param This            Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
  @param Request         A null-terminated Unicode string in <ConfigRequest> format.
  @param Progress        On return, points to a character in the Request string.
                         Points to the string's null terminator if request was successful.
                         Points to the most recent '&' before the first failing name/value
                         pair (or the beginning of the string if the failure is in the
                         first name/value pair) if the request was not successful.
  @param Results         A null-terminated Unicode string in <ConfigAltResp> format which
                         has all values filled in for the names in the Request string.
                         String to be allocated by the called function.

  @retval  EFI_SUCCESS            The Results is filled with the requested values.
  @retval  EFI_OUT_OF_RESOURCES   Not enough memory to store the results.
  @retval  EFI_INVALID_PARAMETER  Request is NULL, illegal syntax, or unknown name.
  @retval  EFI_NOT_FOUND          Routing data doesn't match any storage in this driver.

**/
EFI_STATUS
EFIAPI
BootMaintExtractConfig (
  IN  CONST EFI_HII_CONFIG_ACCESS_PROTOCOL   *This,
  IN  CONST EFI_STRING                       Request,
  OUT EFI_STRING                             *Progress,
  OUT EFI_STRING                             *Results
  )
{
  EFI_STATUS         Status;
  UINTN              BufferSize;
  BMM_CALLBACK_DATA  *Private;
  EFI_STRING                       ConfigRequestHdr;
  EFI_STRING                       ConfigRequest;
  BOOLEAN                          AllocatedRequest;
  UINTN                            Size;

  if (Progress == NULL || Results == NULL) {
    return EFI_INVALID_PARAMETER;
  }

  *Progress = Request;
  if ((Request != NULL) && !HiiIsConfigHdrMatch (Request, &gBootMaintFormSetGuid, mBootMaintStorageName)) {
    return EFI_NOT_FOUND;
  }

  ConfigRequestHdr = NULL;
  ConfigRequest    = NULL;
  AllocatedRequest = FALSE;
  Size             = 0;

  Private = BMM_CALLBACK_DATA_FROM_THIS (This);
  //
  // Convert buffer data to <ConfigResp> by helper function BlockToConfig()
  //
  BufferSize = sizeof (BMM_FAKE_NV_DATA);
  ConfigRequest = Request;
  if ((Request == NULL) || (StrStr (Request, L"OFFSET") == NULL)) {
    //
    // Request has no request element, construct full request string.
    // Allocate and fill a buffer large enough to hold the <ConfigHdr> template
    // followed by "&OFFSET=0&WIDTH=WWWWWWWWWWWWWWWW" followed by a Null-terminator
    //
    ConfigRequestHdr = HiiConstructConfigHdr (&gBootMaintFormSetGuid, mBootMaintStorageName, Private->BmmDriverHandle);
    Size = (StrLen (ConfigRequestHdr) + 32 + 1) * sizeof (CHAR16);
    ConfigRequest = AllocateZeroPool (Size);
    ASSERT (ConfigRequest != NULL);
    AllocatedRequest = TRUE;
    UnicodeSPrint (ConfigRequest, Size, L"%s&OFFSET=0&WIDTH=%016LX", ConfigRequestHdr, (UINT64)BufferSize);
    FreePool (ConfigRequestHdr);
  }

  Status = gHiiConfigRouting->BlockToConfig (
                                gHiiConfigRouting,
                                ConfigRequest,
                                (UINT8 *) &Private->BmmFakeNvData,
                                BufferSize,
                                Results,
                                Progress
                                );
  //
  // Free the allocated config request string.
  //
  if (AllocatedRequest) {
    FreePool (ConfigRequest);
    ConfigRequest = NULL;
  }
  //
  // Set Progress string to the original request string.
  //
  if (Request == NULL) {
    *Progress = NULL;
  } else if (StrStr (Request, L"OFFSET") == NULL) {
    *Progress = Request + StrLen (Request);
  }

  return Status;
}
Beispiel #3
0
/**
  This function processes the results of changes in configuration.


  @param This               Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
  @param Action             Specifies the type of action taken by the browser.
  @param QuestionId         A unique value which is sent to the original exporting driver
                            so that it can identify the type of data to expect.
  @param Type               The type of value for the question.
  @param Value              A pointer to the data being sent to the original exporting driver.
  @param ActionRequest      On return, points to the action requested by the callback function.

  @retval EFI_SUCCESS           The callback successfully handled the action.
  @retval EFI_OUT_OF_RESOURCES  Not enough storage is available to hold the variable and its data.
  @retval EFI_DEVICE_ERROR      The variable could not be saved.
  @retval EFI_UNSUPPORTED       The specified Action is not supported by the callback.
  @retval EFI_INVALID_PARAMETER The parameter of Value or ActionRequest is invalid.
**/
EFI_STATUS
EFIAPI
BootMaintCallback (
  IN  CONST EFI_HII_CONFIG_ACCESS_PROTOCOL         *This,
  IN        EFI_BROWSER_ACTION                     Action,
  IN        EFI_QUESTION_ID                        QuestionId,
  IN        UINT8                                  Type,
  IN        EFI_IFR_TYPE_VALUE                     *Value,
  OUT       EFI_BROWSER_ACTION_REQUEST             *ActionRequest
  )
{
  BMM_CALLBACK_DATA *Private;
  BM_MENU_ENTRY     *NewMenuEntry;
  BMM_FAKE_NV_DATA  *CurrentFakeNVMap;
  EFI_STATUS        Status;
  UINTN             OldValue;
  UINTN             NewValue;
  UINTN             Number;
  UINTN             Index;

  //
  //Chech whether exit from FileExplorer and reenter BM,if yes,reclaim string depositories
  //
  if (Action == EFI_BROWSER_ACTION_FORM_OPEN){
    if(mEnterFileExplorer ){
      ReclaimStringDepository();
      mEnterFileExplorer = FALSE;
    }
  }

  if (Action != EFI_BROWSER_ACTION_CHANGING && Action != EFI_BROWSER_ACTION_CHANGED) {
    //
    // Do nothing for other UEFI Action. Only do call back when data is changed.
    //
    return EFI_UNSUPPORTED;
  }

  OldValue       = 0;
  NewValue       = 0;
  Number         = 0;

  Private        = BMM_CALLBACK_DATA_FROM_THIS (This);

  //
  // Retrive uncommitted data from Form Browser
  //
  CurrentFakeNVMap = &Private->BmmFakeNvData;
  HiiGetBrowserData (&mBootMaintGuid, mBootMaintStorageName, sizeof (BMM_FAKE_NV_DATA), (UINT8 *) CurrentFakeNVMap);

  if (Action == EFI_BROWSER_ACTION_CHANGING) {
    if (Value == NULL) {
      return EFI_INVALID_PARAMETER;
    }
    
    UpdatePageId (Private, QuestionId);

    if (QuestionId < FILE_OPTION_OFFSET) {
      if (QuestionId < CONFIG_OPTION_OFFSET) {
        switch (QuestionId) {
        case FORM_BOOT_ADD_ID:
          // Leave Bm and enter FileExplorer.
          Private->FeCurrentState = FileExplorerStateAddBootOption;
          Private->FeDisplayContext = FileExplorerDisplayUnknown;
          ReclaimStringDepository (); 
          UpdateFileExplorer(Private, 0);
          mEnterFileExplorer = TRUE;
          break;

        case FORM_DRV_ADD_FILE_ID:
          // Leave Bm and enter FileExplorer.
          Private->FeCurrentState = FileExplorerStateAddDriverOptionState;
          Private->FeDisplayContext = FileExplorerDisplayUnknown;
          ReclaimStringDepository ();
          UpdateFileExplorer(Private, 0);
          mEnterFileExplorer = TRUE;
          break;

        case FORM_DRV_ADD_HANDLE_ID:
          CleanUpPage (FORM_DRV_ADD_HANDLE_ID, Private);
          UpdateDrvAddHandlePage (Private);
          break;

        case FORM_BOOT_DEL_ID:
          CleanUpPage (FORM_BOOT_DEL_ID, Private);
          UpdateBootDelPage (Private);
          break;

        case FORM_BOOT_CHG_ID:
        case FORM_DRV_CHG_ID:
          UpdatePageBody (QuestionId, Private);
          break;

        case FORM_DRV_DEL_ID:
          CleanUpPage (FORM_DRV_DEL_ID, Private);
          UpdateDrvDelPage (Private);
          break;

        case FORM_BOOT_NEXT_ID:
          CleanUpPage (FORM_BOOT_NEXT_ID, Private);
          UpdateBootNextPage (Private);
          break;

        case FORM_TIME_OUT_ID:
          CleanUpPage (FORM_TIME_OUT_ID, Private);
          UpdateTimeOutPage (Private);
          break;

        case FORM_CON_IN_ID:
        case FORM_CON_OUT_ID:
        case FORM_CON_ERR_ID:
          UpdatePageBody (QuestionId, Private);
          break;

        case FORM_CON_MODE_ID:
          CleanUpPage (FORM_CON_MODE_ID, Private);
          UpdateConModePage (Private);
          break;

        case FORM_CON_COM_ID:
          CleanUpPage (FORM_CON_COM_ID, Private);
          UpdateConCOMPage (Private);
          break;

        default:
          break;
        }
      } else if ((QuestionId >= TERMINAL_OPTION_OFFSET) && (QuestionId < CONSOLE_OPTION_OFFSET)) {
        Index                  = (UINT16) (QuestionId - TERMINAL_OPTION_OFFSET);
        Private->CurrentTerminal  = Index;

        CleanUpPage (FORM_CON_COM_SETUP_ID, Private);
        UpdateTerminalPage (Private);

      } else if (QuestionId >= HANDLE_OPTION_OFFSET) {
        Index                  = (UINT16) (QuestionId - HANDLE_OPTION_OFFSET);

        NewMenuEntry            = BOpt_GetMenuEntry (&DriverMenu, Index);
        ASSERT (NewMenuEntry != NULL);
        Private->HandleContext  = (BM_HANDLE_CONTEXT *) NewMenuEntry->VariableContext;

        CleanUpPage (FORM_DRV_ADD_HANDLE_DESC_ID, Private);

        Private->MenuEntry                  = NewMenuEntry;
        Private->LoadContext->FilePathList  = Private->HandleContext->DevicePath;

        UpdateDriverAddHandleDescPage (Private);
      }
    }
    if (QuestionId == KEY_VALUE_BOOT_FROM_FILE){
      // Leave Bm and enter FileExplorer.
      Private->FeCurrentState = FileExplorerStateBootFromFile;
      Private->FeDisplayContext = FileExplorerDisplayUnknown;
      ReclaimStringDepository ();
      UpdateFileExplorer(Private, 0);
      mEnterFileExplorer = TRUE;
    }
  } else if (Action == EFI_BROWSER_ACTION_CHANGED) {
    if ((Value == NULL) || (ActionRequest == NULL)) {
      return EFI_INVALID_PARAMETER;
    }

    switch (QuestionId) {
    case KEY_VALUE_SAVE_AND_EXIT:
    case KEY_VALUE_NO_SAVE_AND_EXIT:
      if (QuestionId == KEY_VALUE_SAVE_AND_EXIT) {
        Status = ApplyChangeHandler (Private, CurrentFakeNVMap, Private->BmmPreviousPageId);
        if (EFI_ERROR (Status)) {
          return Status;
        }
      } else if (QuestionId == KEY_VALUE_NO_SAVE_AND_EXIT) {
        DiscardChangeHandler (Private, CurrentFakeNVMap);
      }

      //
      // Tell browser not to ask for confirmation of changes,
      // since we have already applied or discarded.
      //
      *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_SUBMIT_EXIT;

      break;
 
    case FORM_RESET:
      gRT->ResetSystem (EfiResetCold, EFI_SUCCESS, 0, NULL);
      return EFI_UNSUPPORTED;

    default:
      break;
    }
  }

  //
  // Pass changed uncommitted data back to Form Browser
  //
  HiiSetBrowserData (&mBootMaintGuid, mBootMaintStorageName, sizeof (BMM_FAKE_NV_DATA), (UINT8 *) CurrentFakeNVMap, NULL);

  return EFI_SUCCESS;
}
Beispiel #4
0
/**
  This function applies changes in a driver's configuration.
  Input is a Configuration, which has the routing data for this
  driver followed by name / value configuration pairs. The driver
  must apply those pairs to its configurable storage. If the
  driver's configuration is stored in a linear block of data
  and the driver's name / value pairs are in <BlockConfig>
  format, it may use the ConfigToBlock helper function (above) to
  simplify the job. Currently not implemented.

  @param[in]  This                Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
  @param[in]  Configuration       A null-terminated Unicode string in
                                  <ConfigString> format.   
  @param[out] Progress            A pointer to a string filled in with the
                                  offset of the most recent '&' before the
                                  first failing name / value pair (or the
                                  beginn ing of the string if the failure
                                  is in the first name / value pair) or
                                  the terminating NULL if all was
                                  successful.

  @retval EFI_SUCCESS             The results have been distributed or are
                                  awaiting distribution.  
  @retval EFI_OUT_OF_RESOURCES    Not enough memory to store the
                                  parts of the results that must be
                                  stored awaiting possible future
                                  protocols.
  @retval EFI_INVALID_PARAMETERS  Passing in a NULL for the
                                  Results parameter would result
                                  in this type of error.
  @retval EFI_NOT_FOUND           Target for the specified routing data
                                  was not found.
**/
EFI_STATUS
EFIAPI
BootMaintRouteConfig (
  IN CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
  IN CONST EFI_STRING                     Configuration,
  OUT EFI_STRING                          *Progress
  )
{
  EFI_STATUS                      Status;
  UINTN                           BufferSize;
  EFI_HII_CONFIG_ROUTING_PROTOCOL *ConfigRouting;
  BMM_FAKE_NV_DATA                *NewBmmData;
  BMM_FAKE_NV_DATA                *OldBmmData;
  BM_MENU_ENTRY                   *NewMenuEntry;
  BM_LOAD_CONTEXT                 *NewLoadContext;
  UINT16                          Index;  
  BMM_CALLBACK_DATA               *Private; 

  if (Progress == NULL) {
    return EFI_INVALID_PARAMETER;
  }
  *Progress = Configuration;

  if (Configuration == NULL) {
    return EFI_INVALID_PARAMETER;
  }

  //
  // Check routing data in <ConfigHdr>.
  // Note: there is no name for Name/Value storage, only GUID will be checked
  //
  if (!HiiIsConfigHdrMatch (Configuration, &mBootMaintGuid, mBootMaintStorageName)) {
    return EFI_NOT_FOUND;
  }

  Status = gBS->LocateProtocol (
                  &gEfiHiiConfigRoutingProtocolGuid, 
                  NULL, 
                  (VOID **)&ConfigRouting
                  );
  if (EFI_ERROR (Status)) {
    return Status;
  }
  
  Private = BMM_CALLBACK_DATA_FROM_THIS (This);  
  //
  // Get Buffer Storage data from EFI variable
  //
  BufferSize = sizeof (BMM_FAKE_NV_DATA);
  OldBmmData = &Private->BmmOldFakeNVData;
  NewBmmData = &Private->BmmFakeNvData;
  //
  // Convert <ConfigResp> to buffer data by helper function ConfigToBlock()
  //
  Status = ConfigRouting->ConfigToBlock (
                            ConfigRouting,
                            Configuration,
                            (UINT8 *) NewBmmData,
                            &BufferSize,
                            Progress
                            );
  ASSERT_EFI_ERROR (Status);    
  //
  // Compare new and old BMM configuration data and only do action for modified item to 
  // avoid setting unnecessary non-volatile variable
  //
  
  //
  // Check data which located in BMM main page and save the settings if need
  //         
  if (CompareMem (&NewBmmData->BootNext, &OldBmmData->BootNext, sizeof (NewBmmData->BootNext)) != 0) {
    Status = Var_UpdateBootNext (Private);
  }
  
  //
  // Check data which located in Boot Options Menu and save the settings if need
  //      
  if (CompareMem (NewBmmData->BootOptionDel, OldBmmData->BootOptionDel, sizeof (NewBmmData->BootOptionDel)) != 0) {  
    for (Index = 0; 
         ((Index < BootOptionMenu.MenuNumber) && (Index < (sizeof (NewBmmData->BootOptionDel) / sizeof (NewBmmData->BootOptionDel[0])))); 
         Index ++) {
      NewMenuEntry            = BOpt_GetMenuEntry (&BootOptionMenu, Index);
      NewLoadContext          = (BM_LOAD_CONTEXT *) NewMenuEntry->VariableContext;
      NewLoadContext->Deleted = NewBmmData->BootOptionDel[Index];
      NewBmmData->BootOptionDel[Index] = FALSE;
    }
    
    Var_DelBootOption ();
  }
  
  if (CompareMem (NewBmmData->BootOptionOrder, OldBmmData->BootOptionOrder, sizeof (NewBmmData->BootOptionOrder)) != 0) {  
    Status = Var_UpdateBootOrder (Private);
  } 

  //
  // Check data which located in Driver Options Menu and save the settings if need
  //              
  if (CompareMem (NewBmmData->DriverOptionDel, OldBmmData->DriverOptionDel, sizeof (NewBmmData->DriverOptionDel)) != 0) {       
    for (Index = 0; 
         ((Index < DriverOptionMenu.MenuNumber) && (Index < (sizeof (NewBmmData->DriverOptionDel) / sizeof (NewBmmData->DriverOptionDel[0])))); 
         Index++) {
      NewMenuEntry            = BOpt_GetMenuEntry (&DriverOptionMenu, Index);
      NewLoadContext          = (BM_LOAD_CONTEXT *) NewMenuEntry->VariableContext;
      NewLoadContext->Deleted = NewBmmData->DriverOptionDel[Index];
      NewBmmData->DriverOptionDel[Index] = FALSE;
    }
    Var_DelDriverOption ();  
  }
  
  if (CompareMem (NewBmmData->DriverOptionOrder, OldBmmData->DriverOptionOrder, sizeof (NewBmmData->DriverOptionOrder)) != 0) {  
    Status = Var_UpdateDriverOrder (Private);
  }      

  //
  // After user do the save action, need to update OldBmmData.
  //
  CopyMem (OldBmmData, NewBmmData, sizeof (BMM_FAKE_NV_DATA));

  return EFI_SUCCESS;
}
Beispiel #5
0
/**
  This function processes the results of changes in configuration.


  @param This               Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
  @param Action             Specifies the type of action taken by the browser.
  @param QuestionId         A unique value which is sent to the original exporting driver
                            so that it can identify the type of data to expect.
  @param Type               The type of value for the question.
  @param Value              A pointer to the data being sent to the original exporting driver.
  @param ActionRequest      On return, points to the action requested by the callback function.

  @retval EFI_SUCCESS           The callback successfully handled the action.
  @retval EFI_OUT_OF_RESOURCES  Not enough storage is available to hold the variable and its data.
  @retval EFI_DEVICE_ERROR      The variable could not be saved.
  @retval EFI_UNSUPPORTED       The specified Action is not supported by the callback.
  @retval EFI_INVALID_PARAMETER The parameter of Value or ActionRequest is invalid.
**/
EFI_STATUS
EFIAPI
BootMaintCallback (
  IN  CONST EFI_HII_CONFIG_ACCESS_PROTOCOL         *This,
  IN        EFI_BROWSER_ACTION                     Action,
  IN        EFI_QUESTION_ID                        QuestionId,
  IN        UINT8                                  Type,
  IN        EFI_IFR_TYPE_VALUE                     *Value,
  OUT       EFI_BROWSER_ACTION_REQUEST             *ActionRequest
  )
{
  BMM_CALLBACK_DATA *Private;
  BM_MENU_ENTRY     *NewMenuEntry;
  BMM_FAKE_NV_DATA  *CurrentFakeNVMap;
  UINTN             Index;
  EFI_DEVICE_PATH_PROTOCOL * File;

  if (Action != EFI_BROWSER_ACTION_CHANGING && Action != EFI_BROWSER_ACTION_CHANGED) {
    //
    // Do nothing for other UEFI Action. Only do call back when data is changed.
    //
    return EFI_UNSUPPORTED;
  }

  Private        = BMM_CALLBACK_DATA_FROM_THIS (This);
  //
  // Retrive uncommitted data from Form Browser
  //
  CurrentFakeNVMap = &Private->BmmFakeNvData;
  HiiGetBrowserData (&mBootMaintGuid, mBootMaintStorageName, sizeof (BMM_FAKE_NV_DATA), (UINT8 *) CurrentFakeNVMap);

  if (Action == EFI_BROWSER_ACTION_CHANGING) {
    if (Value == NULL) {
      return EFI_INVALID_PARAMETER;
    }
    
    UpdatePageId (Private, QuestionId);

    if (QuestionId < FILE_OPTION_OFFSET) {
      if (QuestionId < CONFIG_OPTION_OFFSET) {
        switch (QuestionId) {
        case FORM_BOOT_ADD_ID:
          // Leave BMM and enter FileExplorer. 
          ChooseFile (NULL, L".efi", CreateBootOptionFromFile, &File);
          break;

        case FORM_DRV_ADD_FILE_ID:
          // Leave BMM and enter FileExplorer.
          ChooseFile (NULL, L".efi", CreateDriverOptionFromFile, &File);
          break;

        case FORM_DRV_ADD_HANDLE_ID:
          CleanUpPage (FORM_DRV_ADD_HANDLE_ID, Private);
          UpdateDrvAddHandlePage (Private);
          break;

        case FORM_BOOT_DEL_ID:
          CleanUpPage (FORM_BOOT_DEL_ID, Private);
          UpdateBootDelPage (Private);
          break;

        case FORM_BOOT_CHG_ID:
        case FORM_DRV_CHG_ID:
          UpdatePageBody (QuestionId, Private);
          break;

        case FORM_DRV_DEL_ID:
          CleanUpPage (FORM_DRV_DEL_ID, Private);
          UpdateDrvDelPage (Private);
          break;

        case FORM_CON_IN_ID:
        case FORM_CON_OUT_ID:
        case FORM_CON_ERR_ID:
          UpdatePageBody (QuestionId, Private);
          break;

        case FORM_CON_MODE_ID:
          CleanUpPage (FORM_CON_MODE_ID, Private);
          UpdateConModePage (Private);
          break;

        case FORM_CON_COM_ID:
          CleanUpPage (FORM_CON_COM_ID, Private);
          UpdateConCOMPage (Private);
          break;

        default:
          break;
        }
      } else if ((QuestionId >= TERMINAL_OPTION_OFFSET) && (QuestionId < CONSOLE_OPTION_OFFSET)) {
        Index                  = (UINT16) (QuestionId - TERMINAL_OPTION_OFFSET);
        Private->CurrentTerminal  = Index;

        CleanUpPage (FORM_CON_COM_SETUP_ID, Private);
        UpdateTerminalPage (Private);

      } else if (QuestionId >= HANDLE_OPTION_OFFSET) {
        Index                  = (UINT16) (QuestionId - HANDLE_OPTION_OFFSET);

        NewMenuEntry            = BOpt_GetMenuEntry (&DriverMenu, Index);
        ASSERT (NewMenuEntry != NULL);
        Private->HandleContext  = (BM_HANDLE_CONTEXT *) NewMenuEntry->VariableContext;

        CleanUpPage (FORM_DRV_ADD_HANDLE_DESC_ID, Private);

        Private->MenuEntry                  = NewMenuEntry;
        Private->LoadContext->FilePathList  = Private->HandleContext->DevicePath;

        UpdateDriverAddHandleDescPage (Private);
      }
    }
    if (QuestionId == KEY_VALUE_BOOT_FROM_FILE){
      // Leave BMM and enter FileExplorer.
      ChooseFile (NULL, L".efi", BootFromFile, &File);
    }
  } else if (Action == EFI_BROWSER_ACTION_CHANGED) {
    if ((Value == NULL) || (ActionRequest == NULL)) {
      return EFI_INVALID_PARAMETER;
    }
   
    if (QuestionId == KEY_VALUE_SAVE_AND_EXIT_BOOT) {
      CurrentFakeNVMap->BootOptionChanged = FALSE;
      *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_SUBMIT_EXIT;
    } else if (QuestionId == KEY_VALUE_SAVE_AND_EXIT_DRIVER) {
      CurrentFakeNVMap->DriverOptionChanged = FALSE;
      *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_SUBMIT_EXIT;
    } else if (QuestionId == KEY_VALUE_NO_SAVE_AND_EXIT_DRIVER) {
      //
      // Discard changes and exit formset
      //
      CurrentFakeNVMap->DriverOptionalData[0]     = 0x0000;
      CurrentFakeNVMap->DriverDescriptionData[0]  = 0x0000;
      CurrentFakeNVMap->DriverOptionChanged = FALSE;
      CurrentFakeNVMap->ForceReconnect      = TRUE;
      *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_DISCARD_EXIT;
    } else if (QuestionId == KEY_VALUE_NO_SAVE_AND_EXIT_BOOT) {
      //
      // Discard changes and exit formset
      //
      CurrentFakeNVMap->BootOptionalData[0]     = 0x0000;
      CurrentFakeNVMap->BootDescriptionData[0]  = 0x0000;
      CurrentFakeNVMap->BootOptionChanged = FALSE;
      *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_DISCARD_EXIT;
    } else if (QuestionId == KEY_VALUE_BOOT_DESCRIPTION || QuestionId == KEY_VALUE_BOOT_OPTION) {
      CurrentFakeNVMap->BootOptionChanged = TRUE;
    } else if (QuestionId == KEY_VALUE_DRIVER_DESCRIPTION || QuestionId == KEY_VALUE_DRIVER_OPTION) {
      CurrentFakeNVMap->DriverOptionChanged = TRUE;
    } 

    if ((QuestionId >= BOOT_OPTION_DEL_QUESTION_ID) && (QuestionId < BOOT_OPTION_DEL_QUESTION_ID + MAX_MENU_NUMBER)) {
      if (Value->b){
        //
        // Means user try to delete this boot option but not press F10 or "Commit Changes and Exit" menu.
        //
        CurrentFakeNVMap->BootOptionDelMark[QuestionId - BOOT_OPTION_DEL_QUESTION_ID] = TRUE;
      } else {
        //
        // Means user remove the old check status.
        //
        CurrentFakeNVMap->BootOptionDelMark[QuestionId - BOOT_OPTION_DEL_QUESTION_ID] = FALSE;
      }
    } else if ((QuestionId >= DRIVER_OPTION_DEL_QUESTION_ID) && (QuestionId < DRIVER_OPTION_DEL_QUESTION_ID + MAX_MENU_NUMBER)) {
      if (Value->b){
        CurrentFakeNVMap->DriverOptionDelMark[QuestionId - DRIVER_OPTION_DEL_QUESTION_ID] = TRUE;
      } else {
        CurrentFakeNVMap->DriverOptionDelMark[QuestionId - DRIVER_OPTION_DEL_QUESTION_ID] = FALSE;
      }
    } else {
      switch (QuestionId) {
      case KEY_VALUE_SAVE_AND_EXIT:
      case KEY_VALUE_NO_SAVE_AND_EXIT:
        if (QuestionId == KEY_VALUE_SAVE_AND_EXIT) {
          *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_SUBMIT_EXIT;
        } else if (QuestionId == KEY_VALUE_NO_SAVE_AND_EXIT) {
          DiscardChangeHandler (Private, CurrentFakeNVMap);
          *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_DISCARD_EXIT;
        }

        break;

      case FORM_RESET:
        gRT->ResetSystem (EfiResetCold, EFI_SUCCESS, 0, NULL);
        return EFI_UNSUPPORTED;

      default:
        break;
      }
    }
  }

  //
  // Pass changed uncommitted data back to Form Browser
  //
  HiiSetBrowserData (&mBootMaintGuid, mBootMaintStorageName, sizeof (BMM_FAKE_NV_DATA), (UINT8 *) CurrentFakeNVMap, NULL);

  return EFI_SUCCESS;
}
Beispiel #6
0
/**
  This function applies changes in a driver's configuration.
  Input is a Configuration, which has the routing data for this
  driver followed by name / value configuration pairs. The driver
  must apply those pairs to its configurable storage. If the
  driver's configuration is stored in a linear block of data
  and the driver's name / value pairs are in <BlockConfig>
  format, it may use the ConfigToBlock helper function (above) to
  simplify the job. Currently not implemented.

  @param[in]  This                Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
  @param[in]  Configuration       A null-terminated Unicode string in
                                  <ConfigString> format.   
  @param[out] Progress            A pointer to a string filled in with the
                                  offset of the most recent '&' before the
                                  first failing name / value pair (or the
                                  beginn ing of the string if the failure
                                  is in the first name / value pair) or
                                  the terminating NULL if all was
                                  successful.

  @retval EFI_SUCCESS             The results have been distributed or are
                                  awaiting distribution.  
  @retval EFI_OUT_OF_RESOURCES    Not enough memory to store the
                                  parts of the results that must be
                                  stored awaiting possible future
                                  protocols.
  @retval EFI_INVALID_PARAMETERS  Passing in a NULL for the
                                  Results parameter would result
                                  in this type of error.
  @retval EFI_NOT_FOUND           Target for the specified routing data
                                  was not found.
**/
EFI_STATUS
EFIAPI
BootMaintRouteConfig (
  IN CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
  IN CONST EFI_STRING                     Configuration,
  OUT EFI_STRING                          *Progress
  )
{
  EFI_STATUS                      Status;
  UINTN                           BufferSize;
  EFI_HII_CONFIG_ROUTING_PROTOCOL *ConfigRouting;
  BMM_FAKE_NV_DATA                *NewBmmData;
  BMM_FAKE_NV_DATA                *OldBmmData;
  BM_CONSOLE_CONTEXT              *NewConsoleContext;
  BM_TERMINAL_CONTEXT             *NewTerminalContext;
  BM_MENU_ENTRY                   *NewMenuEntry;
  BM_LOAD_CONTEXT                 *NewLoadContext;
  UINT16                          Index;
  BOOLEAN                         TerminalAttChange;
  BMM_CALLBACK_DATA               *Private; 

  if (Progress == NULL) {
    return EFI_INVALID_PARAMETER;
  }
  *Progress = Configuration;

  if (Configuration == NULL) {
    return EFI_INVALID_PARAMETER;
  }

  //
  // Check routing data in <ConfigHdr>.
  // Note: there is no name for Name/Value storage, only GUID will be checked
  //
  if (!HiiIsConfigHdrMatch (Configuration, &mBootMaintGuid, mBootMaintStorageName)) {
    return EFI_NOT_FOUND;
  }

  Status = gBS->LocateProtocol (
                  &gEfiHiiConfigRoutingProtocolGuid, 
                  NULL, 
                  (VOID **)&ConfigRouting
                  );
  if (EFI_ERROR (Status)) {
    return Status;
  }

  Private = BMM_CALLBACK_DATA_FROM_THIS (This);  
  //
  // Get Buffer Storage data from EFI variable
  //
  BufferSize = sizeof (BMM_FAKE_NV_DATA);
  OldBmmData = &Private->BmmOldFakeNVData;
  NewBmmData = &Private->BmmFakeNvData;
  //
  // Convert <ConfigResp> to buffer data by helper function ConfigToBlock()
  //
  Status = ConfigRouting->ConfigToBlock (
                            ConfigRouting,
                            Configuration,
                            (UINT8 *) NewBmmData,
                            &BufferSize,
                            Progress
                            );
  ASSERT_EFI_ERROR (Status);    
  //
  // Compare new and old BMM configuration data and only do action for modified item to 
  // avoid setting unnecessary non-volatile variable
  //

  //
  // Check data which located in BMM main page and save the settings if need
  //         
  if (CompareMem (&NewBmmData->BootNext, &OldBmmData->BootNext, sizeof (NewBmmData->BootNext)) != 0) {
    Status = Var_UpdateBootNext (Private);
  }

  //
  // Check data which located in Boot Options Menu and save the settings if need
  //      
  if (CompareMem (NewBmmData->BootOptionDel, OldBmmData->BootOptionDel, sizeof (NewBmmData->BootOptionDel)) != 0) {  
    for (Index = 0; 
         ((Index < BootOptionMenu.MenuNumber) && (Index < (sizeof (NewBmmData->BootOptionDel) / sizeof (NewBmmData->BootOptionDel[0])))); 
         Index ++) {
      NewMenuEntry            = BOpt_GetMenuEntry (&BootOptionMenu, Index);
      NewLoadContext          = (BM_LOAD_CONTEXT *) NewMenuEntry->VariableContext;
      NewLoadContext->Deleted = NewBmmData->BootOptionDel[Index];
      NewBmmData->BootOptionDel[Index] = FALSE;
      NewBmmData->BootOptionDelMark[Index] = FALSE;
    }

    Var_DelBootOption ();
  }

  if (CompareMem (NewBmmData->BootOptionOrder, OldBmmData->BootOptionOrder, sizeof (NewBmmData->BootOptionOrder)) != 0) {
    Status = Var_UpdateBootOrder (Private);
  }

  if (CompareMem (&NewBmmData->BootTimeOut, &OldBmmData->BootTimeOut, sizeof (NewBmmData->BootTimeOut)) != 0){
    Status = gRT->SetVariable(
                    L"Timeout",
                    &gEfiGlobalVariableGuid,
                    EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
                    sizeof(UINT16),
                    &(NewBmmData->BootTimeOut)
                    );
    if (EFI_ERROR (Status)) {
      //
      // If set variable fail, and don't have the appropriate error status for RouteConfig fuction to return,
      // just return the EFI_NOT_FOUND.
      //
      if (Status == EFI_OUT_OF_RESOURCES) {
        return Status;
      } else {
        return EFI_NOT_FOUND;
      }
    }
    Private->BmmOldFakeNVData.BootTimeOut = NewBmmData->BootTimeOut;
  }

  //
  // Check data which located in Driver Options Menu and save the settings if need
  //              
  if (CompareMem (NewBmmData->DriverOptionDel, OldBmmData->DriverOptionDel, sizeof (NewBmmData->DriverOptionDel)) != 0) {       
    for (Index = 0; 
         ((Index < DriverOptionMenu.MenuNumber) && (Index < (sizeof (NewBmmData->DriverOptionDel) / sizeof (NewBmmData->DriverOptionDel[0])))); 
         Index++) {
      NewMenuEntry            = BOpt_GetMenuEntry (&DriverOptionMenu, Index);
      NewLoadContext          = (BM_LOAD_CONTEXT *) NewMenuEntry->VariableContext;
      NewLoadContext->Deleted = NewBmmData->DriverOptionDel[Index];
      NewBmmData->DriverOptionDel[Index] = FALSE;
      NewBmmData->DriverOptionDelMark[Index] = FALSE;
    }
    Var_DelDriverOption ();  
  }

  if (CompareMem (NewBmmData->DriverOptionOrder, OldBmmData->DriverOptionOrder, sizeof (NewBmmData->DriverOptionOrder)) != 0) {  
    Status = Var_UpdateDriverOrder (Private);
  }

  if (CompareMem (&NewBmmData->ConsoleOutMode, &OldBmmData->ConsoleOutMode, sizeof (NewBmmData->ConsoleOutMode)) != 0){
    Var_UpdateConMode(Private);
  }

  TerminalAttChange = FALSE;
  for (Index = 0; Index < TerminalMenu.MenuNumber; Index++) {

    //
    // only need update modified items
    //
    if (CompareMem (&NewBmmData->COMBaudRate[Index], &OldBmmData->COMBaudRate[Index], sizeof (NewBmmData->COMBaudRate[Index])) == 0 &&
         CompareMem (&NewBmmData->COMDataRate[Index], &OldBmmData->COMDataRate[Index], sizeof (NewBmmData->COMDataRate[Index])) == 0 &&
         CompareMem (&NewBmmData->COMStopBits[Index], &OldBmmData->COMStopBits[Index], sizeof (NewBmmData->COMStopBits[Index])) == 0 &&
         CompareMem (&NewBmmData->COMParity[Index], &OldBmmData->COMParity[Index], sizeof (NewBmmData->COMParity[Index])) == 0 &&
         CompareMem (&NewBmmData->COMTerminalType[Index], &OldBmmData->COMTerminalType[Index], sizeof (NewBmmData->COMTerminalType[Index])) == 0 &&
         CompareMem (&NewBmmData->COMFlowControl[Index], &OldBmmData->COMFlowControl[Index], sizeof (NewBmmData->COMFlowControl[Index])) == 0) {
      continue;
    }

    NewMenuEntry = BOpt_GetMenuEntry (&TerminalMenu, Index);
    ASSERT (NewMenuEntry != NULL);
    NewTerminalContext = (BM_TERMINAL_CONTEXT *) NewMenuEntry->VariableContext;
    NewTerminalContext->BaudRateIndex = NewBmmData->COMBaudRate[Index];
    ASSERT (NewBmmData->COMBaudRate[Index] < (sizeof (BaudRateList) / sizeof (BaudRateList[0])));
    NewTerminalContext->BaudRate      = BaudRateList[NewBmmData->COMBaudRate[Index]].Value;
    NewTerminalContext->DataBitsIndex = NewBmmData->COMDataRate[Index];
    ASSERT (NewBmmData->COMDataRate[Index] < (sizeof (DataBitsList) / sizeof (DataBitsList[0])));
    NewTerminalContext->DataBits      = (UINT8) DataBitsList[NewBmmData->COMDataRate[Index]].Value;
    NewTerminalContext->StopBitsIndex = NewBmmData->COMStopBits[Index];
    ASSERT (NewBmmData->COMStopBits[Index] < (sizeof (StopBitsList) / sizeof (StopBitsList[0])));
    NewTerminalContext->StopBits      = (UINT8) StopBitsList[NewBmmData->COMStopBits[Index]].Value;
    NewTerminalContext->ParityIndex   = NewBmmData->COMParity[Index];
    ASSERT (NewBmmData->COMParity[Index] < (sizeof (ParityList) / sizeof (ParityList[0])));
    NewTerminalContext->Parity        = (UINT8) ParityList[NewBmmData->COMParity[Index]].Value;
    NewTerminalContext->TerminalType  = NewBmmData->COMTerminalType[Index];
    NewTerminalContext->FlowControl   = NewBmmData->COMFlowControl[Index];
    ChangeTerminalDevicePath (
      NewTerminalContext->DevicePath,
      FALSE
      );
    TerminalAttChange = TRUE;
  }
  if (TerminalAttChange) {
    Var_UpdateConsoleInpOption ();
    Var_UpdateConsoleOutOption ();
    Var_UpdateErrorOutOption ();
  }
  //
  // Check data which located in Console Options Menu and save the settings if need
  //
  if (CompareMem (NewBmmData->ConsoleInCheck, OldBmmData->ConsoleInCheck, sizeof (NewBmmData->ConsoleInCheck)) != 0){
    for (Index = 0; Index < ConsoleInpMenu.MenuNumber; Index++){
      NewMenuEntry                = BOpt_GetMenuEntry(&ConsoleInpMenu, Index);
      NewConsoleContext           = (BM_CONSOLE_CONTEXT *)NewMenuEntry->VariableContext;
      ASSERT (Index < MAX_MENU_NUMBER);
      NewConsoleContext->IsActive = NewBmmData->ConsoleInCheck[Index];
    }
    for (Index = 0; Index < TerminalMenu.MenuNumber; Index++) {
      NewMenuEntry                = BOpt_GetMenuEntry (&TerminalMenu, Index);
      NewTerminalContext          = (BM_TERMINAL_CONTEXT *) NewMenuEntry->VariableContext;
      ASSERT (Index + ConsoleInpMenu.MenuNumber < MAX_MENU_NUMBER);
      NewTerminalContext->IsConIn = NewBmmData->ConsoleInCheck[Index + ConsoleInpMenu.MenuNumber];
    }
    Var_UpdateConsoleInpOption();
  }

  if (CompareMem (NewBmmData->ConsoleOutCheck, OldBmmData->ConsoleOutCheck, sizeof (NewBmmData->ConsoleOutCheck)) != 0){
    for (Index = 0; Index < ConsoleOutMenu.MenuNumber; Index++){
      NewMenuEntry                = BOpt_GetMenuEntry(&ConsoleOutMenu, Index);
      NewConsoleContext           = (BM_CONSOLE_CONTEXT *)NewMenuEntry->VariableContext;
      ASSERT (Index < MAX_MENU_NUMBER);
      NewConsoleContext->IsActive = NewBmmData->ConsoleOutCheck[Index];
    }
    for (Index = 0; Index < TerminalMenu.MenuNumber; Index++) {
      NewMenuEntry                = BOpt_GetMenuEntry (&TerminalMenu, Index);
      NewTerminalContext          = (BM_TERMINAL_CONTEXT *) NewMenuEntry->VariableContext;
      ASSERT (Index + ConsoleOutMenu.MenuNumber < MAX_MENU_NUMBER);
      NewTerminalContext->IsConOut = NewBmmData->ConsoleOutCheck[Index + ConsoleOutMenu.MenuNumber];
    }
    Var_UpdateConsoleOutOption();
  }

  if (CompareMem (NewBmmData->ConsoleErrCheck, OldBmmData->ConsoleErrCheck, sizeof (NewBmmData->ConsoleErrCheck)) != 0){
    for (Index = 0; Index < ConsoleErrMenu.MenuNumber; Index++){
      NewMenuEntry                = BOpt_GetMenuEntry(&ConsoleErrMenu, Index);
      NewConsoleContext           = (BM_CONSOLE_CONTEXT *)NewMenuEntry->VariableContext;
      ASSERT (Index < MAX_MENU_NUMBER);
      NewConsoleContext->IsActive = NewBmmData->ConsoleErrCheck[Index];
    }
    for (Index = 0; Index < TerminalMenu.MenuNumber; Index++) {
      NewMenuEntry                = BOpt_GetMenuEntry (&TerminalMenu, Index);
      NewTerminalContext          = (BM_TERMINAL_CONTEXT *) NewMenuEntry->VariableContext;
      ASSERT (Index + ConsoleErrMenu.MenuNumber < MAX_MENU_NUMBER);
      NewTerminalContext->IsStdErr = NewBmmData->ConsoleErrCheck[Index + ConsoleErrMenu.MenuNumber];
    }
    Var_UpdateErrorOutOption();
  }

  if (CompareMem (NewBmmData->BootDescriptionData, OldBmmData->BootDescriptionData, sizeof (NewBmmData->BootDescriptionData)) != 0 ||
       CompareMem (NewBmmData->BootOptionalData, OldBmmData->BootOptionalData, sizeof (NewBmmData->BootOptionalData)) != 0) {
    Status = Var_UpdateBootOption (Private);
    NewBmmData->BootOptionChanged = FALSE;
    if (EFI_ERROR (Status)) {
      return Status;
    }
    BOpt_GetBootOptions (Private);
  }

  if (CompareMem (NewBmmData->DriverDescriptionData, OldBmmData->DriverDescriptionData, sizeof (NewBmmData->DriverDescriptionData)) != 0 ||
       CompareMem (NewBmmData->DriverOptionalData, OldBmmData->DriverOptionalData, sizeof (NewBmmData->DriverOptionalData)) != 0) {
    Status = Var_UpdateDriverOption (
              Private,
              Private->BmmHiiHandle,
              NewBmmData->DriverDescriptionData,
              NewBmmData->DriverOptionalData,
              NewBmmData->ForceReconnect
              );
    NewBmmData->DriverOptionChanged = FALSE;
    NewBmmData->ForceReconnect      = TRUE;
    if (EFI_ERROR (Status)) {
      return Status;
    }

    BOpt_GetDriverOptions (Private);
  }

  //
  // After user do the save action, need to update OldBmmData.
  //
  CopyMem (OldBmmData, NewBmmData, sizeof (BMM_FAKE_NV_DATA));

  return EFI_SUCCESS;
}