static int bt_power_populate_dt_pinfo(struct platform_device *pdev)
{
int rc;
BT_PWR_DBG("");
if (!bt_power_pdata)
return -ENOMEM;
if (pdev->dev.of_node) {
#ifdef USE_GPIO_EXPANDER_BT_EN
rc = of_property_read_u32(pdev->dev.of_node,
"qca,bt-reset-gpio", &bt_power_pdata->bt_gpio_sys_rst);
BT_PWR_DBG("GPIO_EXPANDER rc : %d", rc);
#else
bt_power_pdata->bt_gpio_sys_rst =
of_get_named_gpio(pdev->dev.of_node,
"qca,bt-reset-gpio", 0);
#endif
if (bt_power_pdata->bt_gpio_sys_rst < 0) {
BT_PWR_ERR("bt-reset-gpio not provided in device tree");
return bt_power_pdata->bt_gpio_sys_rst;
}
rc = bt_dt_parse_vreg_info(&pdev->dev,
&bt_power_pdata->bt_vdd_io,
"qca,bt-vdd-io");
if (rc < 0)
return rc;
rc = bt_dt_parse_vreg_info(&pdev->dev,
&bt_power_pdata->bt_vdd_pa,
"qca,bt-vdd-pa");
if (rc < 0)
return rc;
rc = bt_dt_parse_vreg_info(&pdev->dev,
&bt_power_pdata->bt_vdd_ldo,
"qca,bt-vdd-ldo");
if (rc < 0)
return rc;
rc = bt_dt_parse_vreg_info(&pdev->dev,
&bt_power_pdata->bt_chip_pwd,
"qca,bt-chip-pwd");
if (rc < 0)
return rc;
}
bt_power_pdata->bt_power_setup = bluetooth_power;
return 0;
}
static int bt_vreg_enable(struct bt_power_vreg_data *vreg)
{
int rc = 0;
BT_PWR_DBG("vreg_en for : %s", vreg->name);
if (!vreg->is_enabled) {
if (vreg->set_voltage_sup) {
rc = regulator_set_voltage(vreg->reg,
vreg->low_vol_level,
vreg->high_vol_level);
if (rc < 0) {
BT_PWR_ERR("vreg_set_vol(%s) failed rc=%d\n",
vreg->name, rc);
goto out;
}
}
rc = regulator_enable(vreg->reg);
if (rc < 0) {
BT_PWR_ERR("regulator_enable(%s) failed. rc=%d\n",
vreg->name, rc);
goto out;
}
vreg->is_enabled = true;
}
out:
return rc;
}
static int bt_vreg_disable(struct bt_power_vreg_data *vreg)
{
int rc = 0;
if (!vreg)
return rc;
BT_PWR_DBG("vreg_disable for : %s", vreg->name);
if (vreg->is_enabled) {
rc = regulator_disable(vreg->reg);
if (rc < 0) {
BT_PWR_ERR("regulator_disable(%s) failed. rc=%d\n",
vreg->name, rc);
goto out;
}
vreg->is_enabled = false;
if (vreg->set_voltage_sup) {
/* Set the min voltage to 0 */
rc = regulator_set_voltage(vreg->reg,
0,
vreg->high_vol_level);
if (rc < 0) {
BT_PWR_ERR("vreg_set_vol(%s) failed rc=%d\n",
vreg->name, rc);
goto out;
}
}
}
out:
return rc;
}
static int bt_configure_gpios(int on)
{
int rc = 0;
int bt_reset_gpio = bt_power_pdata->bt_gpio_sys_rst;
BT_PWR_DBG("%s bt_gpio= %d on: %d", __func__, bt_reset_gpio, on);
if (on) {
rc = gpio_request(bt_reset_gpio, "bt_sys_rst_n");
if (rc) {
BT_PWR_ERR("unable to request gpio %d (%d)\n",
bt_reset_gpio, rc);
return rc;
}
rc = gpio_direction_output(bt_reset_gpio, 0);
if (rc) {
BT_PWR_ERR("Unable to set direction\n");
return rc;
}
rc = gpio_direction_output(bt_reset_gpio, 1);
if (rc) {
BT_PWR_ERR("Unable to set direction\n");
return rc;
}
msleep(100);
} else {
gpio_set_value(bt_reset_gpio, 0);
msleep(100);
}
return rc;
}
static int bluetooth_power(int on)
{
int rc = 0;
BT_PWR_DBG("on: %d", on);
if (on) {
if (bt_power_pdata->bt_vdd_io) {
rc = bt_configure_vreg(bt_power_pdata->bt_vdd_io);
if (rc < 0) {
BT_PWR_ERR("bt_power vddio config failed");
goto out;
}
}
if (bt_power_pdata->bt_vdd_ldo) {
rc = bt_configure_vreg(bt_power_pdata->bt_vdd_ldo);
if (rc < 0) {
BT_PWR_ERR("bt_power vddldo config failed");
goto vdd_ldo_fail;
}
}
if (bt_power_pdata->bt_vdd_pa) {
rc = bt_configure_vreg(bt_power_pdata->bt_vdd_pa);
if (rc < 0) {
BT_PWR_ERR("bt_power vddpa config failed");
goto vdd_pa_fail;
}
}
if (bt_power_pdata->bt_chip_pwd) {
rc = bt_configure_vreg(bt_power_pdata->bt_chip_pwd);
if (rc < 0) {
BT_PWR_ERR("bt_power vddldo config failed");
goto chip_pwd_fail;
}
}
if (bt_power_pdata->bt_gpio_sys_rst) {
rc = bt_configure_gpios(on);
if (rc < 0) {
BT_PWR_ERR("bt_power gpio config failed");
goto gpio_fail;
}
}
} else {
bt_configure_gpios(on);
gpio_fail:
if (bt_power_pdata->bt_gpio_sys_rst)
gpio_free(bt_power_pdata->bt_gpio_sys_rst);
bt_vreg_disable(bt_power_pdata->bt_chip_pwd);
chip_pwd_fail:
bt_vreg_disable(bt_power_pdata->bt_vdd_pa);
vdd_pa_fail:
bt_vreg_disable(bt_power_pdata->bt_vdd_ldo);
vdd_ldo_fail:
bt_vreg_disable(bt_power_pdata->bt_vdd_io);
}
out:
return rc;
}
static int bt_dt_parse_vreg_info(struct device *dev,
struct bt_power_vreg_data **vreg_data, const char *vreg_name)
{
int len, ret = 0;
const __be32 *prop;
char prop_name[MAX_PROP_SIZE];
struct bt_power_vreg_data *vreg;
struct device_node *np = dev->of_node;
BT_PWR_DBG("vreg dev tree parse for %s", vreg_name);
snprintf(prop_name, MAX_PROP_SIZE, "%s-supply", vreg_name);
if (of_parse_phandle(np, prop_name, 0)) {
vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
if (!vreg) {
dev_err(dev, "No memory for vreg: %s\n", vreg_name);
ret = -ENOMEM;
goto err;
}
vreg->name = vreg_name;
snprintf(prop_name, MAX_PROP_SIZE,
"%s-voltage-level", vreg_name);
prop = of_get_property(np, prop_name, &len);
if (!prop || (len != (2 * sizeof(__be32)))) {
dev_warn(dev, "%s %s property\n",
prop ? "invalid format" : "no", prop_name);
} else {
vreg->low_vol_level = be32_to_cpup(&prop[0]);
vreg->high_vol_level = be32_to_cpup(&prop[1]);
}
*vreg_data = vreg;
BT_PWR_DBG("%s: vol=[%d %d]uV\n",
vreg->name, vreg->low_vol_level,
vreg->high_vol_level);
} else
BT_PWR_INFO("%s: is not provided in device tree", vreg_name);
err:
return ret;
}
static int bt_power_populate_dt_pinfo(struct platform_device *pdev)
{
int rc;
BT_PWR_DBG("");
if (!bt_power_pdata)
return -ENOMEM;
if (pdev->dev.of_node) {
bt_power_pdata->bt_gpio_sys_rst =
of_get_named_gpio(pdev->dev.of_node,
"qca,bt-reset-gpio", 0);
if (bt_power_pdata->bt_gpio_sys_rst < 0) {
BT_PWR_ERR("bt-reset-gpio not provided in device tree");
return bt_power_pdata->bt_gpio_sys_rst;
}
rc = bt_dt_parse_vreg_info(&pdev->dev,
&bt_power_pdata->bt_vdd_io,
"qca,bt-vdd-io");
if (rc < 0)
return rc;
rc = bt_dt_parse_vreg_info(&pdev->dev,
&bt_power_pdata->bt_vdd_pa,
"qca,bt-vdd-pa");
if (rc < 0)
return rc;
rc = bt_dt_parse_vreg_info(&pdev->dev,
&bt_power_pdata->bt_vdd_ldo,
"qca,bt-vdd-ldo");
if (rc < 0)
return rc;
rc = bt_dt_parse_vreg_info(&pdev->dev,
&bt_power_pdata->bt_chip_pwd,
"qca,bt-chip-pwd");
if (rc < 0)
return rc;
}
bt_power_pdata->bt_power_setup = bluetooth_power;
return 0;
}
static int bt_configure_vreg(struct bt_power_vreg_data *vreg)
{
int rc = 0;
BT_PWR_DBG("config %s", vreg->name);
/* Get the regulator handle for vreg */
if (!(vreg->reg)) {
rc = bt_vreg_init(vreg);
if (rc < 0)
return rc;
}
rc = bt_vreg_enable(vreg);
return rc;
}
static int bt_configure_gpios(int on)
{
int rc = 0;
int bt_reset_gpio = bt_power_pdata->bt_gpio_sys_rst;
BT_PWR_DBG("%s bt_gpio= %d on: %d", __func__, bt_reset_gpio, on);
if (on) {
rc = gpio_request(bt_reset_gpio, "bt_sys_rst_n");
if (rc) {
BT_PWR_ERR("unable to request gpio %d (%d)\n",
bt_reset_gpio, rc);
return rc;
}
rc = gpio_direction_output(bt_reset_gpio, 0);
if (rc) {
BT_PWR_ERR("Unable to set direction\n");
return rc;
}
/*
Add 50msec delay between BT_EN gpio line toggle from 0 to 1
during BT turn on process to allow settling time for the controller
to recongnize the BT_EN pin toggle.
*/
msleep(50);
rc = gpio_direction_output(bt_reset_gpio, 1);
if (rc) {
BT_PWR_ERR("Unable to set direction\n");
return rc;
}
msleep(50);
} else {
gpio_set_value(bt_reset_gpio, 0);
msleep(100);
}
return rc;
}
static int bt_vreg_init(struct bt_power_vreg_data *vreg)
{
int rc = 0;
struct device *dev = &btpdev->dev;
BT_PWR_DBG("vreg_get for : %s", vreg->name);
/* Get the regulator handle */
vreg->reg = regulator_get(dev, vreg->name);
if (IS_ERR(vreg->reg)) {
rc = PTR_ERR(vreg->reg);
pr_err("%s: regulator_get(%s) failed. rc=%d\n",
__func__, vreg->name, rc);
goto out;
}
if ((regulator_count_voltages(vreg->reg) > 0)
&& (vreg->low_vol_level) && (vreg->high_vol_level))
vreg->set_voltage_sup = 1;
out:
return rc;
}