Beispiel #1
0
void ks_bfile_flush(ks_bfile_t *bfile){
    
    ks_buf_t *buf = &bfile->buf;
    ks_file_t *file = &bfile->file;
    
    if(BUF_EMPTY(buf)){
        return;
    }
    
    ks_write_file(file,(char*)buf->start,(size_t)(buf->pos-buf->start),file->offset);
    BUF_RESET(buf);
}
Beispiel #2
0
/* Flush buffered data to shell output */
static void
telnet_flush(void)
{
	struct buf *buf;
	buf = &telnet_data.writebuf;
	uint8_t data[2];

	data[1] = '\0';
	igordev_telnet.write_status = IDEV_STATUS_BUSY;
	/* Flush as long as it is ok. */
	while (!BUF_EMPTY(buf)) {
		buf_read(buf, data, 1);
		shell_output((char *)data, "");
	}
	igordev_telnet.write_status = IDEV_STATUS_OK;
}
Beispiel #3
0
/*
 * Read num bytes from device and place it into data.
 * Data assumed to be a buffer large enough for num bytes.
 * Addr here is ignored.
 */
uint8_t
telnet_recv(uint64_t addr, uint8_t *data, uint8_t num)
{
	struct buf *buf;
	uint8_t byte;
	uint8_t i;

	buf = &telnet_data.readbuf;
	/* Avoid making larger buffers for now. */
	for (i = 0; i < num; i++) {
		buf_read(buf, &byte, 1);
		if (BUF_EMPTY(buf))
			break;
		*(data + i) = byte;
	}
	return (i);
}
Beispiel #4
0
/* Handle processing of tape requests. */
t_stat mt_srv(UNIT * uptr)
{
    int                 chan = uptr->u5 & MT_CHAN;
    int                 unit = uptr - mt_unit;
    int                 cmd = uptr->u5 & MT_CMD;
    DEVICE              *dptr = find_dev_from_unit(uptr);
    t_mtrlnt            reclen;
    t_stat              r = SCPE_ARG;   /* Force error if not set */
    uint8               ch;
    int                 mode;
    t_mtrlnt            loc;


    /* Simulate tape load delay */
    if (uptr->u5 & MT_LOADED) {
        uptr->u5 &= ~MT_LOADED;
        uptr->u5 |= MT_BSY|MT_RDY;
        sim_debug(DEBUG_DETAIL, dptr, "Unit=%d Loaded\n", unit);
        sim_activate(uptr, 50000);
        return SCPE_OK;
    }

    if (uptr->u5 & MT_BSY) {
        uptr->u5 &= ~MT_BSY;
        sim_debug(DEBUG_DETAIL, dptr, "Unit=%d Online\n", unit);
        iostatus |= 1 << (uptr - mt_unit);
        if (uptr->u5 & MT_IDLE)
           sim_activate(uptr, 50000);
        return SCPE_OK;
    }

    if (uptr->u5 & MT_IDLE) {
        uptr->u5 &= ~MT_IDLE;
        if (uptr->u5 & MT_RDY) {
           sim_debug(DEBUG_DETAIL, dptr, "Unit=%d idling\n", unit);
           return SCPE_OK;
        }
        sim_debug(DEBUG_DETAIL, dptr, "Unit=%d start %02o\n", unit, cmd);
    }

    switch (cmd) {
    /* Handle interrogate */
    case MT_INT: 
         if (sim_tape_wrp(uptr)) 
            chan_set_wrp(chan);
         uptr->u5 &= ~(MT_CMD|MT_BIN);
         uptr->u5 |= MT_RDY;
         chan_set_end(chan);
         sim_debug(DEBUG_DETAIL, dptr, "Status\n");
         return SCPE_OK;

    case  MT_RD:                /* Read */
        /* If at end of record, fill buffer */
        if (BUF_EMPTY(uptr)) {
            sim_debug(DEBUG_DETAIL, dptr, "Read unit=%d %s ", unit,
                (uptr->u5 & MT_BIN)? "bin": "bcd");
            if (sim_tape_eot(uptr)) {
                sim_activate(uptr, 4000);
                return mt_error(uptr, chan, MTSE_EOM, dptr);
            }
            r = sim_tape_rdrecf(uptr, &mt_buffer[chan][0], &reclen, BUFFSIZE);
            if (r != MTSE_OK) {
                if (r == MTSE_TMK) {
                    sim_debug(DEBUG_DETAIL, dptr, "TM\n");
                    ch = 017;
                    (void)chan_write_char(chan, &ch, 1);
                    sim_activate(uptr, 4000);
                } else { 
                    sim_debug(DEBUG_DETAIL, dptr, "r=%d\n", r);
                    sim_activate(uptr, 5000);
                }
                return mt_error(uptr, chan, r, dptr);
            } else {
                uptr->u5 &= ~(MT_BOT|MT_EOT);
                uptr->hwmark = reclen;
            }
            sim_debug(DEBUG_DETAIL, dptr, "%d chars\n", uptr->hwmark);
            uptr->u6 = 0;
            if ((uptr->u5 & MT_BIN) == 0)
                mode = 0100;
            else
                mode = 0;
            for (loc = 0; loc < reclen; loc++) {
                ch = mt_buffer[chan][loc] & 0177;
                if (((parity_table[ch & 077]) ^ (ch & 0100) ^ mode) == 0) {
                    chan_set_error(chan);
                    break;
                }
            }
        }
        ch = mt_buffer[chan][uptr->u6++] & 0177;
        /* 00 characters are not transfered in BCD mode */
        if (ch == 0) {
              if (((uint32)uptr->u6) >= uptr->hwmark) {
                   sim_activate(uptr, 4000);
                   return mt_error(uptr, chan, MTSE_OK, dptr);
              } else {
                   sim_activate(uptr, HT);
                   return SCPE_OK;
              }
        }

        if (chan_write_char(chan, &ch, 
                             (((uint32)uptr->u6) >= uptr->hwmark) ? 1 : 0)) {
                sim_debug(DEBUG_DATA, dptr, "Read unit=%d %d EOR\n", unit,
                         uptr->hwmark-uptr->u6);
                sim_activate(uptr, 4000);
                return mt_error(uptr, chan, MTSE_OK, dptr);
        } else {
            sim_debug(DEBUG_DATA, dptr, "Read data unit=%d %d %03o\n",
                          unit, uptr->u6, ch);
            sim_activate(uptr, HT);
        }
        return SCPE_OK;

    case  MT_RDBK:              /* Read Backword */
        /* If at end of record, fill buffer */
        if (BUF_EMPTY(uptr)) {
            sim_debug(DEBUG_DETAIL, dptr, "Read back unit=%d %s ", unit,
                (uptr->u5 & MT_BIN)? "bin": "bcd");
            if (sim_tape_bot(uptr)) {
                sim_activate(uptr, 4000);
                return mt_error(uptr, chan, MTSE_BOT, dptr);
            }
            r = sim_tape_rdrecr(uptr, &mt_buffer[chan][0], &reclen, BUFFSIZE);
            if (r != MTSE_OK) {
                if (r == MTSE_TMK) {
                    sim_debug(DEBUG_DETAIL, dptr, "TM\n");
                    ch = 017;
                    (void)chan_write_char(chan, &ch, 1);
                    sim_activate(uptr, 4000);
                } else { 
                    uptr->u5 |= MT_BSY;
                    sim_debug(DEBUG_DETAIL, dptr, "r=%d\n", r);
                    sim_activate(uptr, 100);
                }
                return mt_error(uptr, chan, r, dptr);
            } else {
                uptr->u5 &= ~(MT_BOT|MT_EOT);
                uptr->hwmark = reclen;
            }
            sim_debug(DEBUG_DETAIL, dptr, "%d chars\n", uptr->hwmark);
            uptr->u6 = uptr->hwmark;
            if ((uptr->u5 & MT_BIN) == 0)
                mode = 0100;
            else
                mode = 0;
            for (loc = 0; loc < reclen; loc++) {
                ch = mt_buffer[chan][loc] & 0177;
                if (((parity_table[ch & 077]) ^ (ch & 0100) ^ mode) == 0) {
                    chan_set_error(chan);
                    break;
                }
            }
        }
        ch = mt_buffer[chan][--uptr->u6] & 0177;
        /* 00 characters are not transfered in BCD mode */
        if (ch == 0) {
              if (uptr->u6 <= 0) {
                    sim_activate(uptr, 4000);
                return mt_error(uptr, chan, MTSE_OK, dptr);
              } else {
                sim_activate(uptr, HT);
                return SCPE_OK;
              }
        }

        if (chan_write_char(chan, &ch, (uptr->u6 > 0) ? 0 : 1)) {
                sim_debug(DEBUG_DATA, dptr, "Read back unit=%d %d EOR\n",
                                 unit, uptr->hwmark-uptr->u6);
                sim_activate(uptr, 100);
                return mt_error(uptr, chan, MTSE_OK, dptr);
        } else {
            sim_debug(DEBUG_DATA, dptr, "Read  back data unit=%d %d %03o\n",
                          unit, uptr->u6, ch);
            sim_activate(uptr, HT);
        }
        return SCPE_OK;

    case MT_WR:                 /* Write */
        /* Check if write protected */
        if (uptr->u6 == 0 && sim_tape_wrp(uptr)) {
            sim_activate(uptr, 100);
            return mt_error(uptr, chan, MTSE_WRP, dptr);
        }
        if (chan_read_char(chan, &ch,
                          (uptr->u6 > BUFFSIZE) ? 1 : 0)) {
            reclen = uptr->u6;
            /* If no transfer, then either erase */
            if (reclen == 0) {
                 sim_debug(DEBUG_DETAIL, dptr, "Erase\n");
                 r = MTSE_OK;
            } else if ((reclen == 1) && (cmd & MT_BIN) == 0 &&
                 (mt_buffer[chan][0] == 017)) {
            /* Check if write rtape mark */
                 sim_debug(DEBUG_DETAIL, dptr, "Write Mark unit=%d\n", unit);
                 r = sim_tape_wrtmk(uptr);
            } else {
                sim_debug(DEBUG_DETAIL, dptr, 
                        "Write unit=%d Block %d %s chars\n", unit, reclen,
                                (uptr->u5 & MT_BIN)? "bin": "bcd");
                r = sim_tape_wrrecf(uptr, &mt_buffer[chan][0], reclen);
            }
            uptr->u5 &= ~(MT_BOT|MT_EOT);
            sim_activate(uptr, 4000);
            return mt_error(uptr, chan, r, dptr);       /* Record errors */
        } else {
            /* Copy data to buffer */
            ch &= 077;
            ch |= parity_table[ch];
            if ((uptr->u5 & MT_BIN)) 
                ch ^= 0100;
            /* Don't write out even parity zeros */
            if (ch != 0) 
                mt_buffer[chan][uptr->u6++] = ch;
            sim_debug(DEBUG_DATA, dptr, "Write data unit=%d %d %03o\n",
                      unit, uptr->u6, ch);
            uptr->hwmark = uptr->u6;
        }
        sim_activate(uptr, HT);
        return SCPE_OK;

    case  MT_FSR:               /* Space forward one record */
        if (BUF_EMPTY(uptr)) {
            /* If at end of record, fill buffer */
            sim_debug(DEBUG_DETAIL, dptr, "Space unit=%d ", unit);
            if (sim_tape_eot(uptr)) {
                uptr->u5 &= ~MT_BOT;
                sim_debug(DEBUG_DETAIL, dptr, "EOT\n");
                sim_activate(uptr, 4000);
                return mt_error(uptr, chan, MTSE_EOM, dptr);
            }
            r = sim_tape_rdrecf(uptr, &mt_buffer[chan][0], &reclen, BUFFSIZE);
            if (r != MTSE_OK) {
                if (r == MTSE_TMK) {
                    sim_debug(DEBUG_DETAIL, dptr, "TM ");
                    reclen = 1;
                    chan_set_eof(chan);
                } else { 
                    sim_debug(DEBUG_DETAIL, dptr, "r=%d ", r);
                    reclen = 10;
                }
            }
            uptr->u5 &= ~(MT_BOT|MT_EOT);
            uptr->hwmark = reclen;
            sim_debug(DEBUG_DETAIL, dptr, "%d chars\n", uptr->hwmark);
            sim_activate(uptr, uptr->hwmark * HT);
            return SCPE_OK;
        }
        sim_activate(uptr, 4000);
        return mt_error(uptr, chan, MTSE_OK, dptr);

    case  MT_BSR:               /* Backspace record */
        if (BUF_EMPTY(uptr)) {
            /* If at end of record, fill buffer */
            sim_debug(DEBUG_DETAIL, dptr, "backspace unit=%d ", unit);
            if (sim_tape_bot(uptr)) {
                sim_debug(DEBUG_DETAIL, dptr, "BOT\n");
                sim_activate(uptr, 100);
                return mt_error(uptr, chan, MTSE_BOT, dptr);
            }
            r = sim_tape_rdrecr(uptr, &mt_buffer[chan][0], &reclen, BUFFSIZE);
            if (r != MTSE_OK) {
                if (r == MTSE_TMK) {
                    sim_debug(DEBUG_DETAIL, dptr, "TM ");
                    reclen = 1;
                    chan_set_eof(chan);
                } else { 
                    reclen = 10;
                    sim_debug(DEBUG_DETAIL, dptr, "r=%d ", r);
                }
            }
            uptr->u5 &= ~(MT_BOT|MT_EOT);
            uptr->hwmark = reclen;
            sim_debug(DEBUG_DETAIL, dptr, "%d chars\n", uptr->hwmark);
            sim_activate(uptr, uptr->hwmark * HT);
            return SCPE_OK;
        }
        sim_activate(uptr, 4000);
        return mt_error(uptr, chan, MTSE_OK, dptr);

    case MT_REW:                /* Rewind */
        sim_debug(DEBUG_DETAIL, dptr, "Rewind unit=%d pos=%d\n", unit,
                        uptr->pos);
        uptr->u5 &= ~(MT_CMD | MT_BIN | MT_IDLE | MT_RDY);
        uptr->u5 |= MT_BSY|MT_RDY;
        iostatus &= ~(1 << (uptr - mt_unit));
        sim_activate(uptr, (uptr->pos/100) + 100);
        r = sim_tape_rewind(uptr);
        uptr->u5 &= ~MT_EOT;
        uptr->u5 |= MT_BOT;
        chan_set_end(chan);
        return r;
    }
    return mt_error(uptr, chan, r, dptr);
}