Beispiel #1
0
bool PLOT_CONTROLLER::OpenPlotfile( const wxString &aSuffix,
                                    PlotFormat     aFormat,
                                    const wxString &aSheetDesc )
{
    LOCALE_IO toggle;

    /* Save the current format: sadly some plot routines depends on this
       but the main reason is that the StartPlot method uses it to
       dispatch the plotter creation */
    m_plotOpts.SetFormat( aFormat );

    // Ensure that the previous plot is closed
    ClosePlot();

    // Now compute the full filename for the output and start the plot
    // (after ensuring the output directory is OK)
    wxString outputDirName = m_plotOpts.GetOutputDirectory() ;
    wxFileName outputDir = wxFileName::DirName( outputDirName );
    wxString boardFilename = m_board->GetFileName();

    if( EnsureOutputDirectory( &outputDir, boardFilename ) )
    {
        wxFileName fn( boardFilename );
        BuildPlotFileName( &fn, outputDirName, aSuffix, GetDefaultPlotExtension( aFormat ) );

        m_plotter = StartPlotBoard( m_board, &m_plotOpts, fn.GetFullPath(), aSheetDesc );
    }

    return( m_plotter != NULL );
}
bool PLOT_CONTROLLER::OpenPlotfile( const wxString &aSuffix,
                                    PlotFormat     aFormat,
                                    const wxString &aSheetDesc )
{
    LOCALE_IO toggle;

    /* Save the current format: sadly some plot routines depends on this
       but the main reason is that the StartPlot method uses it to
       dispatch the plotter creation */
    GetPlotOptions().SetFormat( aFormat );

    // Ensure that the previous plot is closed
    ClosePlot();

    // Now compute the full filename for the output and start the plot
    // (after ensuring the output directory is OK)
    wxString outputDirName = GetPlotOptions().GetOutputDirectory() ;
    wxFileName outputDir = wxFileName::DirName( outputDirName );
    wxString boardFilename = m_board->GetFileName();

    if( EnsureFileDirectoryExists( &outputDir, boardFilename ) )
    {
        // outputDir contains now the full path of plot files
        m_plotFile = boardFilename;
        m_plotFile.SetPath( outputDir.GetPath() );
        wxString fileExt = GetDefaultPlotExtension( aFormat );

        // Gerber format can use specific file ext, depending on layers
        // (now not a good practice, because the official file ext is .gbr)
        if( GetPlotOptions().GetFormat() == PLOT_FORMAT_GERBER &&
            GetPlotOptions().GetUseGerberProtelExtensions() )
            fileExt = GetGerberProtelExtension( GetLayer() );

        // Build plot filenames from the board name and layer names:
        BuildPlotFileName( &m_plotFile, outputDir.GetPath(), aSuffix, fileExt );

        m_plotter = StartPlotBoard( m_board, &GetPlotOptions(), ToLAYER_ID( GetLayer() ),
                                    m_plotFile.GetFullPath(), aSheetDesc );
    }

    return( m_plotter != NULL );
}
Beispiel #3
0
void DIALOG_SVG_PRINT::ExportSVGFile( bool aOnlyOneFile )
{
    m_outputDirectory = m_outputDirectoryName->GetValue();

    // Create output directory if it does not exist (also transform it in
    // absolute form). Bail if it fails
    wxFileName outputDir = wxFileName::DirName( m_outputDirectory );
    wxString boardFilename = m_board->GetFileName();
    WX_TEXT_CTRL_REPORTER reporter( m_messagesBox );

    if( !EnsureOutputDirectory( &outputDir, boardFilename, &reporter ) )
    {
        wxString msg;
        msg.Printf( _( "Could not write plot files to folder \"%s\"." ),
                    GetChars( outputDir.GetPath() ) );
        DisplayError( this, msg );
        return;
    }

    m_printMirror = m_printMirrorOpt->GetValue();
    m_printBW = m_ModeColorOption->GetSelection();
    SetPenWidth();

    // Build layers mask
    LAYER_MSK printMaskLayer = NO_LAYERS;

    for( LAYER_NUM layer = FIRST_LAYER; layer < NB_PCB_LAYERS; ++layer )
    {
        if( m_boxSelectLayer[layer] && m_boxSelectLayer[layer]->GetValue() )
            printMaskLayer |= GetLayerMask( layer );
    }

    wxString    msg;

    for( LAYER_NUM layer = FIRST_LAYER; layer < NB_PCB_LAYERS; ++layer )
    {
        LAYER_MSK currlayer_mask = GetLayerMask( layer );

        if( (printMaskLayer & currlayer_mask ) == 0 )
            continue;

        wxString suffix = m_board->GetStandardLayerName( layer );

        if( aOnlyOneFile )
        {
            m_printMaskLayer = printMaskLayer;
            suffix = wxT( "brd" );
        }
        else
        {
            m_printMaskLayer = currlayer_mask;
            suffix = m_board->GetStandardLayerName( layer );
        }

        wxFileName fn(boardFilename);
        BuildPlotFileName( &fn, outputDir.GetPath(), suffix, SVGFileExtension );

        if( m_PrintBoardEdgesCtrl->IsChecked() )
            m_printMaskLayer |= EDGE_LAYER;

        if( CreateSVGFile( fn.GetFullPath() ) )
            msg.Printf( _( "Plot: %s OK\n" ), GetChars( fn.GetFullPath() ) );
        else    // Error
            msg.Printf( _( "** Unable to create %s **\n" ), GetChars( fn.GetFullPath() ) );
        m_messagesBox->AppendText( msg );

        if( aOnlyOneFile )
            break;
    }
}
Beispiel #4
0
void DIALOG_PLOT::Plot( wxCommandEvent& event )
{
    applyPlotSettings();

    // If no layer selected, we have nothing plotted.
    // Prompt user if it happens because he could think there is a bug in Pcbnew.
    if( !m_plotOpts.GetLayerSelection().any() )
    {
        DisplayError( this, _( "No layer selected, Nothing to plot" ) );
        return;
    }

    // Create output directory if it does not exist (also transform it in
    // absolute form). Bail if it fails
    wxFileName  outputDir = wxFileName::DirName( m_plotOpts.GetOutputDirectory() );
    wxString    boardFilename = m_parent->GetBoard()->GetFileName();
    REPORTER&   reporter = m_messagesPanel->Reporter();

    if( !EnsureFileDirectoryExists( &outputDir, boardFilename, &reporter ) )
    {
        wxString msg;
        msg.Printf( _( "Could not write plot files to folder \"%s\"." ),
                    GetChars( outputDir.GetPath() ) );
        DisplayError( this, msg );
        return;
    }

    m_plotOpts.SetAutoScale( false );
    m_plotOpts.SetScale( 1 );

    switch( m_plotOpts.GetScaleSelection() )
    {
    default:
        break;

    case 0:     // Autoscale option
        m_plotOpts.SetAutoScale( true );
        break;

    case 2:     // 3:2 option
        m_plotOpts.SetScale( 1.5 );
        break;

    case 3:     // 2:1 option
        m_plotOpts.SetScale( 2 );
        break;

    case 4:     // 3:1 option
        m_plotOpts.SetScale( 3 );
        break;
    }

    /* If the scale factor edit controls are disabled or the scale value
     * is 0, don't adjust the base scale factor. This fixes a bug when
     * the default scale adjust is initialized to 0 and saved in program
     * settings resulting in a divide by zero fault.
     */
    if( m_fineAdjustXscaleOpt->IsEnabled()  && m_XScaleAdjust != 0.0 )
        m_plotOpts.SetFineScaleAdjustX( m_XScaleAdjust );

    if( m_fineAdjustYscaleOpt->IsEnabled() && m_YScaleAdjust != 0.0 )
        m_plotOpts.SetFineScaleAdjustY( m_YScaleAdjust );

    if( m_PSFineAdjustWidthOpt->IsEnabled() )
        m_plotOpts.SetWidthAdjust( m_PSWidthAdjust );

    wxString file_ext( GetDefaultPlotExtension( m_plotOpts.GetFormat() ) );

    // Test for a reasonable scale value
    // XXX could this actually happen? isn't it constrained in the apply
    // function?
    if( m_plotOpts.GetScale() < PLOT_MIN_SCALE )
        DisplayInfoMessage( this,
                            _( "Warning: Scale option set to a very small value" ) );

    if( m_plotOpts.GetScale() > PLOT_MAX_SCALE )
        DisplayInfoMessage( this,
                            _( "Warning: Scale option set to a very large value" ) );

    GERBER_JOBFILE_WRITER jobfile_writer( m_board, &reporter );

    // Save the current plot options in the board
    m_parent->SetPlotSettings( m_plotOpts );

    wxBusyCursor dummy;

    for( LSEQ seq = m_plotOpts.GetLayerSelection().UIOrder();  seq;  ++seq )
    {
        PCB_LAYER_ID layer = *seq;

        // All copper layers that are disabled are actually selected
        // This is due to wonkyness in automatically selecting copper layers
        // for plotting when adding more than two layers to a board.
        // If plot options become accessible to the layers setup dialog
        // please move this functionality there!
        // This skips a copper layer if it is actually disabled on the board.
        if( ( LSET::AllCuMask() & ~m_board->GetEnabledLayers() )[layer] )
            continue;

        // Pick the basename from the board file
        wxFileName fn( boardFilename );

        // Use Gerber Extensions based on layer number
        // (See http://en.wikipedia.org/wiki/Gerber_File)
        if( m_plotOpts.GetFormat() == PLOT_FORMAT_GERBER && m_useGerberExtensions->GetValue() )
            file_ext = GetGerberProtelExtension( layer );

        BuildPlotFileName( &fn, outputDir.GetPath(), m_board->GetLayerName( layer ), file_ext );
        wxString fullname = fn.GetFullName();
        jobfile_writer.AddGbrFile( layer, fullname );

        LOCALE_IO toggle;

        BOARD*      board = m_parent->GetBoard();
        PLOTTER*    plotter = StartPlotBoard( board, &m_plotOpts, layer, fn.GetFullPath(), wxEmptyString );

        // Print diags in messages box:
        wxString msg;

        if( plotter )
        {
            PlotOneBoardLayer( board, plotter, layer, m_plotOpts );
            plotter->EndPlot();
            delete plotter;

            msg.Printf( _( "Plot file \"%s\" created." ), GetChars( fn.GetFullPath() ) );
            reporter.Report( msg, REPORTER::RPT_ACTION );
        }
        else
        {
            msg.Printf( _( "Unable to create file \"%s\"." ), GetChars( fn.GetFullPath() ) );
            reporter.Report( msg, REPORTER::RPT_ERROR );
        }
    }

    if( m_plotOpts.GetFormat() == PLOT_FORMAT_GERBER && m_plotOpts.GetCreateGerberJobFile() )
    {
        // Pick the basename from the board file
        wxFileName fn( boardFilename );
        // Build gerber job file from basename
        BuildPlotFileName( &fn, outputDir.GetPath(), "job", GerberJobFileExtension );
        jobfile_writer.CreateJobFile( fn.GetFullPath() );
    }
}