/*
* Independent profiling "tick" in case we're using a separate
* clock or profiling event source. Currently, that's just
* performance counters--hence the wrapper.
*/
void
proftick(struct clockframe *frame)
{
#ifdef GPROF
struct gmonparam *g;
intptr_t i;
#endif
struct lwp *l;
struct proc *p;
l = curcpu()->ci_data.cpu_onproc;
p = (l ? l->l_proc : NULL);
if (CLKF_USERMODE(frame)) {
mutex_spin_enter(&p->p_stmutex);
if (p->p_stflag & PST_PROFIL)
addupc_intr(l, CLKF_PC(frame));
mutex_spin_exit(&p->p_stmutex);
} else {
#ifdef GPROF
g = &_gmonparam;
if (g->state == GMON_PROF_ON) {
i = CLKF_PC(frame) - g->lowpc;
if (i < g->textsize) {
i /= HISTFRACTION * sizeof(*g->kcount);
g->kcount[i]++;
}
}
#endif
#ifdef LWP_PC
if (p != NULL && (p->p_stflag & PST_PROFIL) != 0)
addupc_intr(l, LWP_PC(l));
#endif
}
}
/*
* The real-time timer, interrupting hz times per second.
*/
void
hardclock(struct clockframe *frame)
{
struct proc *p;
struct cpu_info *ci = curcpu();
p = curproc;
if (p && ((p->p_flag & (P_SYSTEM | P_WEXIT)) == 0)) {
struct process *pr = p->p_p;
/*
* Run current process's virtual and profile time, as needed.
*/
if (CLKF_USERMODE(frame) &&
timerisset(&pr->ps_timer[ITIMER_VIRTUAL].it_value) &&
itimerdecr(&pr->ps_timer[ITIMER_VIRTUAL], tick) == 0) {
atomic_setbits_int(&p->p_flag, P_ALRMPEND);
need_proftick(p);
}
if (timerisset(&pr->ps_timer[ITIMER_PROF].it_value) &&
itimerdecr(&pr->ps_timer[ITIMER_PROF], tick) == 0) {
atomic_setbits_int(&p->p_flag, P_PROFPEND);
need_proftick(p);
}
}
/*
* If no separate statistics clock is available, run it from here.
*/
if (stathz == 0)
statclock(frame);
if (--ci->ci_schedstate.spc_rrticks <= 0)
roundrobin(ci);
/*
* If we are not the primary CPU, we're not allowed to do
* any more work.
*/
if (CPU_IS_PRIMARY(ci) == 0)
return;
tc_ticktock();
ticks++;
/*
* Update real-time timeout queue.
* Process callouts at a very low cpu priority, so we don't keep the
* relatively high clock interrupt priority any longer than necessary.
*/
if (timeout_hardclock_update())
softintr_schedule(softclock_si);
}
/*
* The real-time timer, interrupting hz times per second.
*/
void
hardclock(struct clockframe *frame)
{
struct lwp *l;
struct cpu_info *ci;
ci = curcpu();
l = ci->ci_data.cpu_onproc;
timer_tick(l, CLKF_USERMODE(frame));
/*
* If no separate statistics clock is available, run it from here.
*/
if (stathz == 0)
statclock(frame);
/*
* If no separate schedclock is provided, call it here
* at about 16 Hz.
*/
if (schedhz == 0) {
if ((int)(--ci->ci_schedstate.spc_schedticks) <= 0) {
schedclock(l);
ci->ci_schedstate.spc_schedticks = hardscheddiv;
}
}
if ((--ci->ci_schedstate.spc_ticks) <= 0)
sched_tick(ci);
if (CPU_IS_PRIMARY(ci)) {
hardclock_ticks++;
tc_ticktock();
}
/*
* Update real-time timeout queue.
*/
callout_hardclock();
#ifdef KDTRACE_HOOKS
cyclic_clock_func_t func = cyclic_clock_func[cpu_index(ci)];
if (func) {
(*func)((struct clockframe *)frame);
}
#endif
}
/*
* Statistics clock. Grab profile sample, and if divider reaches 0,
* do process and kernel statistics.
*/
void
statclock(struct clockframe *frame)
{
#ifdef GPROF
struct gmonparam *g;
u_long i;
#endif
struct cpu_info *ci = curcpu();
struct schedstate_percpu *spc = &ci->ci_schedstate;
struct proc *p = curproc;
struct process *pr;
/*
* Notice changes in divisor frequency, and adjust clock
* frequency accordingly.
*/
if (spc->spc_psdiv != psdiv) {
spc->spc_psdiv = psdiv;
spc->spc_pscnt = psdiv;
if (psdiv == 1) {
setstatclockrate(stathz);
} else {
setstatclockrate(profhz);
}
}
if (CLKF_USERMODE(frame)) {
pr = p->p_p;
if (pr->ps_flags & PS_PROFIL)
addupc_intr(p, CLKF_PC(frame));
if (--spc->spc_pscnt > 0)
return;
/*
* Came from user mode; CPU was in user state.
* If this process is being profiled record the tick.
*/
p->p_uticks++;
if (pr->ps_nice > NZERO)
spc->spc_cp_time[CP_NICE]++;
else
spc->spc_cp_time[CP_USER]++;
} else {
#ifdef GPROF
/*
* Kernel statistics are just like addupc_intr, only easier.
*/
g = ci->ci_gmon;
if (g != NULL && g->state == GMON_PROF_ON) {
i = CLKF_PC(frame) - g->lowpc;
if (i < g->textsize) {
i /= HISTFRACTION * sizeof(*g->kcount);
g->kcount[i]++;
}
}
#endif
#if defined(PROC_PC)
if (p != NULL && p->p_p->ps_flags & PS_PROFIL)
addupc_intr(p, PROC_PC(p));
#endif
if (--spc->spc_pscnt > 0)
return;
/*
* Came from kernel mode, so we were:
* - handling an interrupt,
* - doing syscall or trap work on behalf of the current
* user process, or
* - spinning in the idle loop.
* Whichever it is, charge the time as appropriate.
* Note that we charge interrupts to the current process,
* regardless of whether they are ``for'' that process,
* so that we know how much of its real time was spent
* in ``non-process'' (i.e., interrupt) work.
*/
if (CLKF_INTR(frame)) {
if (p != NULL)
p->p_iticks++;
spc->spc_cp_time[CP_INTR]++;
} else if (p != NULL && p != spc->spc_idleproc) {
p->p_sticks++;
spc->spc_cp_time[CP_SYS]++;
} else
spc->spc_cp_time[CP_IDLE]++;
}
spc->spc_pscnt = psdiv;
if (p != NULL) {
p->p_cpticks++;
/*
* If no schedclock is provided, call it here at ~~12-25 Hz;
* ~~16 Hz is best
*/
if (schedhz == 0) {
if ((++curcpu()->ci_schedstate.spc_schedticks & 3) ==
0)
schedclock(p);
}
}
}
/*
* Statistics clock. Grab profile sample, and if divider reaches 0,
* do process and kernel statistics.
*/
void
statclock(struct clockframe *frame)
{
#ifdef GPROF
struct gmonparam *g;
intptr_t i;
#endif
struct cpu_info *ci = curcpu();
struct schedstate_percpu *spc = &ci->ci_schedstate;
struct proc *p;
struct lwp *l;
/*
* Notice changes in divisor frequency, and adjust clock
* frequency accordingly.
*/
if (spc->spc_psdiv != psdiv) {
spc->spc_psdiv = psdiv;
spc->spc_pscnt = psdiv;
if (psdiv == 1) {
setstatclockrate(stathz);
} else {
setstatclockrate(profhz);
}
}
l = ci->ci_data.cpu_onproc;
if ((l->l_flag & LW_IDLE) != 0) {
/*
* don't account idle lwps as swapper.
*/
p = NULL;
} else {
p = l->l_proc;
mutex_spin_enter(&p->p_stmutex);
}
if (CLKF_USERMODE(frame)) {
if ((p->p_stflag & PST_PROFIL) && profsrc == PROFSRC_CLOCK)
addupc_intr(l, CLKF_PC(frame));
if (--spc->spc_pscnt > 0) {
mutex_spin_exit(&p->p_stmutex);
return;
}
/*
* Came from user mode; CPU was in user state.
* If this process is being profiled record the tick.
*/
p->p_uticks++;
if (p->p_nice > NZERO)
spc->spc_cp_time[CP_NICE]++;
else
spc->spc_cp_time[CP_USER]++;
} else {
#ifdef GPROF
/*
* Kernel statistics are just like addupc_intr, only easier.
*/
g = &_gmonparam;
if (profsrc == PROFSRC_CLOCK && g->state == GMON_PROF_ON) {
i = CLKF_PC(frame) - g->lowpc;
if (i < g->textsize) {
i /= HISTFRACTION * sizeof(*g->kcount);
g->kcount[i]++;
}
}
#endif
#ifdef LWP_PC
if (p != NULL && profsrc == PROFSRC_CLOCK &&
(p->p_stflag & PST_PROFIL)) {
addupc_intr(l, LWP_PC(l));
}
#endif
if (--spc->spc_pscnt > 0) {
if (p != NULL)
mutex_spin_exit(&p->p_stmutex);
return;
}
/*
* Came from kernel mode, so we were:
* - handling an interrupt,
* - doing syscall or trap work on behalf of the current
* user process, or
* - spinning in the idle loop.
* Whichever it is, charge the time as appropriate.
* Note that we charge interrupts to the current process,
* regardless of whether they are ``for'' that process,
* so that we know how much of its real time was spent
* in ``non-process'' (i.e., interrupt) work.
*/
if (CLKF_INTR(frame) || (curlwp->l_pflag & LP_INTR) != 0) {
if (p != NULL) {
p->p_iticks++;
}
spc->spc_cp_time[CP_INTR]++;
} else if (p != NULL) {
p->p_sticks++;
spc->spc_cp_time[CP_SYS]++;
} else {
spc->spc_cp_time[CP_IDLE]++;
}
}
spc->spc_pscnt = psdiv;
if (p != NULL) {
atomic_inc_uint(&l->l_cpticks);
mutex_spin_exit(&p->p_stmutex);
}
}
