Beispiel #1
0
void ERR_print_errors_cb(int (*cb) (const char *str, size_t len, void *u),
                         void *u)
{
    unsigned long l;
    char buf[256];
    char buf2[4096];
    const char *file, *data;
    int line, flags;
    /*
     * We don't know what kind of thing CRYPTO_THREAD_ID is. Here is our best
     * attempt to convert it into something we can print.
     */
    union {
        CRYPTO_THREAD_ID tid;
        unsigned long ltid;
    } tid;

    tid.ltid = 0;
    tid.tid = CRYPTO_THREAD_get_current_id();

    while ((l = ERR_get_error_line_data(&file, &line, &data, &flags)) != 0) {
        ERR_error_string_n(l, buf, sizeof(buf));
        BIO_snprintf(buf2, sizeof(buf2), "%lu:%s:%s:%d:%s\n", tid.ltid, buf,
                     file, line, (flags & ERR_TXT_STRING) ? data : "");
        if (cb(buf2, strlen(buf2), u) <= 0)
            break;              /* abort outputting the error report */
    }
}
Beispiel #2
0
static int rand_status(void)
{
    CRYPTO_THREAD_ID cur;
    int ret;
    int do_not_lock;

    if (!RUN_ONCE(&rand_lock_init, do_rand_lock_init))
        return 0;

    cur = CRYPTO_THREAD_get_current_id();
    /*
     * check if we already have the lock (could happen if a RAND_poll()
     * implementation calls RAND_status())
     */
    if (crypto_lock_rand) {
        CRYPTO_THREAD_read_lock(rand_tmp_lock);
        do_not_lock = CRYPTO_THREAD_compare_id(locking_threadid, cur);
        CRYPTO_THREAD_unlock(rand_tmp_lock);
    } else
        do_not_lock = 0;

    if (!do_not_lock) {
        CRYPTO_THREAD_write_lock(rand_lock);
        /*
         * Prevent deadlocks in case we end up in an async engine
         */
        ASYNC_block_pause();

        /*
         * prevent rand_bytes() from trying to obtain the lock again
         */
        CRYPTO_THREAD_write_lock(rand_tmp_lock);
        locking_threadid = cur;
        CRYPTO_THREAD_unlock(rand_tmp_lock);
        crypto_lock_rand = 1;
    }

    if (!initialized) {
        RAND_poll();
        initialized = 1;
    }

    ret = entropy >= ENTROPY_NEEDED;

    if (!do_not_lock) {
        /* before unlocking, we must clear 'crypto_lock_rand' */
        crypto_lock_rand = 0;

        ASYNC_unblock_pause();
        CRYPTO_THREAD_unlock(rand_lock);
    }

    return ret;
}
Beispiel #3
0
int rand_pool_add_additional_data(RAND_POOL *pool)
{
    struct {
        CRYPTO_THREAD_ID tid;
        uint64_t time;
    } data = { 0 };

    /*
     * Add some noise from the thread id and a high resolution timer.
     * The thread id adds a little randomness if the drbg is accessed
     * concurrently (which is the case for the <master> drbg).
     */
    data.tid = CRYPTO_THREAD_get_current_id();
    data.time = get_timer_bits();

    return rand_pool_add(pool, (unsigned char *)&data, sizeof(data), 0);
}
Beispiel #4
0
int rand_pool_add_nonce_data(RAND_POOL *pool)
{
    struct {
        pid_t pid;
        CRYPTO_THREAD_ID tid;
        uint64_t time;
    } data = { 0 };

    /*
     * Add process id, thread id, and a high resolution timestamp to
     * ensure that the nonce is unique whith high probability for
     * different process instances.
     */
    data.pid = getpid();
    data.tid = CRYPTO_THREAD_get_current_id();
    data.time = get_time_stamp();

    return rand_pool_add(pool, (unsigned char *)&data, sizeof(data), 0);
}
Beispiel #5
0
/*
 * Generate additional data that can be used for the drbg. The data does
 * not need to contain entropy, but it's useful if it contains at least
 * some bits that are unpredictable.
 *
 * Returns 0 on failure.
 *
 * On success it allocates a buffer at |*pout| and returns the length of
 * the data. The buffer should get freed using OPENSSL_secure_clear_free().
 */
size_t rand_drbg_get_additional_data(unsigned char **pout, size_t max_len)
{
    RAND_POOL *pool;
    CRYPTO_THREAD_ID thread_id;
    size_t len;
#ifdef OPENSSL_SYS_UNIX
    pid_t pid;
#elif defined(OPENSSL_SYS_WIN32)
    DWORD pid;
#endif
    uint64_t tbits;

    pool = RAND_POOL_new(0, 0, max_len);
    if (pool == NULL)
        return 0;

#ifdef OPENSSL_SYS_UNIX
    pid = getpid();
    RAND_POOL_add(pool, (unsigned char *)&pid, sizeof(pid), 0);
#elif defined(OPENSSL_SYS_WIN32)
    pid = GetCurrentProcessId();
    RAND_POOL_add(pool, (unsigned char *)&pid, sizeof(pid), 0);
#endif

    thread_id = CRYPTO_THREAD_get_current_id();
    if (thread_id != 0)
        RAND_POOL_add(pool, (unsigned char *)&thread_id, sizeof(thread_id), 0);

    tbits = get_timer_bits();
    if (tbits != 0)
        RAND_POOL_add(pool, (unsigned char *)&tbits, sizeof(tbits), 0);

    /* TODO: Use RDSEED? */

    len = RAND_POOL_length(pool);
    if (len != 0)
        *pout = RAND_POOL_detach(pool);
    RAND_POOL_free(pool);

    return len;
}
Beispiel #6
0
void BN_BLINDING_set_current_thread(BN_BLINDING *b)
{
    b->tid = CRYPTO_THREAD_get_current_id();
}
Beispiel #7
0
int BN_BLINDING_is_current_thread(BN_BLINDING *b)
{
    return CRYPTO_THREAD_compare_id(CRYPTO_THREAD_get_current_id(), b->tid);
}
Beispiel #8
0
static int rand_bytes(unsigned char *buf, int num, int pseudo)
{
    static volatile int stirred_pool = 0;
    int i, j, k;
    size_t num_ceil, st_idx, st_num;
    int ok;
    long md_c[2];
    unsigned char local_md[MD_DIGEST_LENGTH];
    EVP_MD_CTX *m;
#ifndef GETPID_IS_MEANINGLESS
    pid_t curr_pid = getpid();
#endif
    time_t curr_time = time(NULL);
    int do_stir_pool = 0;
    /* time value for various platforms */
#ifdef OPENSSL_SYS_WIN32
    FILETIME tv;
# ifdef _WIN32_WCE
    SYSTEMTIME t;
    GetSystemTime(&t);
    SystemTimeToFileTime(&t, &tv);
# else
    GetSystemTimeAsFileTime(&tv);
# endif
#elif defined(OPENSSL_SYS_VXWORKS)
    struct timespec tv;
    clock_gettime(CLOCK_REALTIME, &ts);
#elif defined(OPENSSL_SYS_DSPBIOS)
    unsigned long long tv, OPENSSL_rdtsc();
    tv = OPENSSL_rdtsc();
#else
    struct timeval tv;
    gettimeofday(&tv, NULL);
#endif

#ifdef PREDICT
    if (rand_predictable) {
        static unsigned char val = 0;

        for (i = 0; i < num; i++)
            buf[i] = val++;
        return (1);
    }
#endif

    if (num <= 0)
        return 1;

    m = EVP_MD_CTX_new();
    if (m == NULL)
        goto err_mem;

    /* round upwards to multiple of MD_DIGEST_LENGTH/2 */
    num_ceil =
        (1 + (num - 1) / (MD_DIGEST_LENGTH / 2)) * (MD_DIGEST_LENGTH / 2);

    /*
     * (Based on the rand(3) manpage:)
     *
     * For each group of 10 bytes (or less), we do the following:
     *
     * Input into the hash function the local 'md' (which is initialized from
     * the global 'md' before any bytes are generated), the bytes that are to
     * be overwritten by the random bytes, and bytes from the 'state'
     * (incrementing looping index). From this digest output (which is kept
     * in 'md'), the top (up to) 10 bytes are returned to the caller and the
     * bottom 10 bytes are xored into the 'state'.
     *
     * Finally, after we have finished 'num' random bytes for the
     * caller, 'count' (which is incremented) and the local and global 'md'
     * are fed into the hash function and the results are kept in the
     * global 'md'.
     */

    if (!RUN_ONCE(&rand_lock_init, do_rand_lock_init))
        goto err_mem;

    CRYPTO_THREAD_write_lock(rand_lock);
    /*
     * We could end up in an async engine while holding this lock so ensure
     * we don't pause and cause a deadlock
     */
    ASYNC_block_pause();

    /* prevent rand_bytes() from trying to obtain the lock again */
    CRYPTO_THREAD_write_lock(rand_tmp_lock);
    locking_threadid = CRYPTO_THREAD_get_current_id();
    CRYPTO_THREAD_unlock(rand_tmp_lock);
    crypto_lock_rand = 1;

    if (!initialized) {
        RAND_poll();
        initialized = 1;
    }

    if (!stirred_pool)
        do_stir_pool = 1;

    ok = (entropy >= ENTROPY_NEEDED);
    if (!ok) {
        /*
         * If the PRNG state is not yet unpredictable, then seeing the PRNG
         * output may help attackers to determine the new state; thus we have
         * to decrease the entropy estimate. Once we've had enough initial
         * seeding we don't bother to adjust the entropy count, though,
         * because we're not ambitious to provide *information-theoretic*
         * randomness. NOTE: This approach fails if the program forks before
         * we have enough entropy. Entropy should be collected in a separate
         * input pool and be transferred to the output pool only when the
         * entropy limit has been reached.
         */
        entropy -= num;
        if (entropy < 0)
            entropy = 0;
    }

    if (do_stir_pool) {
        /*
         * In the output function only half of 'md' remains secret, so we
         * better make sure that the required entropy gets 'evenly
         * distributed' through 'state', our randomness pool. The input
         * function (rand_add) chains all of 'md', which makes it more
         * suitable for this purpose.
         */

        int n = STATE_SIZE;     /* so that the complete pool gets accessed */
        while (n > 0) {
#if MD_DIGEST_LENGTH > 20
# error "Please adjust DUMMY_SEED."
#endif
#define DUMMY_SEED "...................." /* at least MD_DIGEST_LENGTH */
            /*
             * Note that the seed does not matter, it's just that
             * rand_add expects to have something to hash.
             */
            rand_add(DUMMY_SEED, MD_DIGEST_LENGTH, 0.0);
            n -= MD_DIGEST_LENGTH;
        }
        if (ok)
            stirred_pool = 1;
    }

    st_idx = state_index;
    st_num = state_num;
    md_c[0] = md_count[0];
    md_c[1] = md_count[1];
    memcpy(local_md, md, sizeof md);

    state_index += num_ceil;
    if (state_index > state_num)
        state_index %= state_num;

    /*
     * state[st_idx], ..., state[(st_idx + num_ceil - 1) % st_num] are now
     * ours (but other threads may use them too)
     */

    md_count[0] += 1;

    /* before unlocking, we must clear 'crypto_lock_rand' */
    crypto_lock_rand = 0;
    ASYNC_unblock_pause();
    CRYPTO_THREAD_unlock(rand_lock);

    while (num > 0) {
        /* num_ceil -= MD_DIGEST_LENGTH/2 */
        j = (num >= MD_DIGEST_LENGTH / 2) ? MD_DIGEST_LENGTH / 2 : num;
        num -= j;
        if (!MD_Init(m))
            goto err;
#ifndef GETPID_IS_MEANINGLESS
        if (curr_pid) {         /* just in the first iteration to save time */
            if (!MD_Update(m, (unsigned char *)&curr_pid, sizeof curr_pid))
                goto err;
            curr_pid = 0;
        }
#endif
        if (curr_time) {        /* just in the first iteration to save time */
            if (!MD_Update(m, (unsigned char *)&curr_time, sizeof curr_time))
                goto err;
            if (!MD_Update(m, (unsigned char *)&tv, sizeof tv))
                goto err;
            curr_time = 0;
            if (!rand_hw_seed(m))
                goto err;
        }
        if (!MD_Update(m, local_md, MD_DIGEST_LENGTH))
            goto err;
        if (!MD_Update(m, (unsigned char *)&(md_c[0]), sizeof(md_c)))
            goto err;

        k = (st_idx + MD_DIGEST_LENGTH / 2) - st_num;
        if (k > 0) {
            if (!MD_Update(m, &(state[st_idx]), MD_DIGEST_LENGTH / 2 - k))
                goto err;
            if (!MD_Update(m, &(state[0]), k))
                goto err;
        } else if (!MD_Update(m, &(state[st_idx]), MD_DIGEST_LENGTH / 2))
            goto err;
        if (!MD_Final(m, local_md))
            goto err;

        for (i = 0; i < MD_DIGEST_LENGTH / 2; i++) {
            /* may compete with other threads */
            state[st_idx++] ^= local_md[i];
            if (st_idx >= st_num)
                st_idx = 0;
            if (i < j)
                *(buf++) = local_md[i + MD_DIGEST_LENGTH / 2];
        }
    }

    if (!MD_Init(m)
            || !MD_Update(m, (unsigned char *)&(md_c[0]), sizeof(md_c))
            || !MD_Update(m, local_md, MD_DIGEST_LENGTH))
        goto err;
    CRYPTO_THREAD_write_lock(rand_lock);
    /*
     * Prevent deadlocks if we end up in an async engine
     */
    ASYNC_block_pause();
    if (!MD_Update(m, md, MD_DIGEST_LENGTH) || !MD_Final(m, md)) {
        CRYPTO_THREAD_unlock(rand_lock);
        goto err;
    }
    ASYNC_unblock_pause();
    CRYPTO_THREAD_unlock(rand_lock);

    EVP_MD_CTX_free(m);
    if (ok)
        return (1);
    else if (pseudo)
        return 0;
    else {
        RANDerr(RAND_F_RAND_BYTES, RAND_R_PRNG_NOT_SEEDED);
        ERR_add_error_data(1, "You need to read the OpenSSL FAQ, "
                           "https://www.openssl.org/docs/faq.html");
        return (0);
    }
err:
    RANDerr(RAND_F_RAND_BYTES, ERR_R_EVP_LIB);
    EVP_MD_CTX_free(m);
    return 0;
err_mem:
    RANDerr(RAND_F_RAND_BYTES, ERR_R_MALLOC_FAILURE);
    EVP_MD_CTX_free(m);
    return 0;

}
Beispiel #9
0
static int rand_add(const void *buf, int num, double add)
{
    int i, j, k, st_idx;
    long md_c[2];
    unsigned char local_md[MD_DIGEST_LENGTH];
    EVP_MD_CTX *m;
    int do_not_lock;
    int rv = 0;

    if (!num)
        return 1;

    /*
     * (Based on the rand(3) manpage)
     *
     * The input is chopped up into units of 20 bytes (or less for
     * the last block).  Each of these blocks is run through the hash
     * function as follows:  The data passed to the hash function
     * is the current 'md', the same number of bytes from the 'state'
     * (the location determined by in incremented looping index) as
     * the current 'block', the new key data 'block', and 'count'
     * (which is incremented after each use).
     * The result of this is kept in 'md' and also xored into the
     * 'state' at the same locations that were used as input into the
     * hash function.
     */

    m = EVP_MD_CTX_new();
    if (m == NULL)
        goto err;

    if (!RUN_ONCE(&rand_lock_init, do_rand_lock_init))
        goto err;

    /* check if we already have the lock */
    if (crypto_lock_rand) {
        CRYPTO_THREAD_ID cur = CRYPTO_THREAD_get_current_id();
        CRYPTO_THREAD_read_lock(rand_tmp_lock);
        do_not_lock = CRYPTO_THREAD_compare_id(locking_threadid, cur);
        CRYPTO_THREAD_unlock(rand_tmp_lock);
    } else
        do_not_lock = 0;

    if (!do_not_lock)
        CRYPTO_THREAD_write_lock(rand_lock);
    st_idx = state_index;

    /*
     * use our own copies of the counters so that even if a concurrent thread
     * seeds with exactly the same data and uses the same subarray there's
     * _some_ difference
     */
    md_c[0] = md_count[0];
    md_c[1] = md_count[1];

    memcpy(local_md, md, sizeof md);

    /* state_index <= state_num <= STATE_SIZE */
    state_index += num;
    if (state_index >= STATE_SIZE) {
        state_index %= STATE_SIZE;
        state_num = STATE_SIZE;
    } else if (state_num < STATE_SIZE) {
        if (state_index > state_num)
            state_num = state_index;
    }
    /* state_index <= state_num <= STATE_SIZE */

    /*
     * state[st_idx], ..., state[(st_idx + num - 1) % STATE_SIZE] are what we
     * will use now, but other threads may use them as well
     */

    md_count[1] += (num / MD_DIGEST_LENGTH) + (num % MD_DIGEST_LENGTH > 0);

    if (!do_not_lock)
        CRYPTO_THREAD_unlock(rand_lock);

    for (i = 0; i < num; i += MD_DIGEST_LENGTH) {
        j = (num - i);
        j = (j > MD_DIGEST_LENGTH) ? MD_DIGEST_LENGTH : j;

        if (!MD_Init(m))
            goto err;
        if (!MD_Update(m, local_md, MD_DIGEST_LENGTH))
            goto err;
        k = (st_idx + j) - STATE_SIZE;
        if (k > 0) {
            if (!MD_Update(m, &(state[st_idx]), j - k))
                goto err;
            if (!MD_Update(m, &(state[0]), k))
                goto err;
        } else if (!MD_Update(m, &(state[st_idx]), j))
            goto err;

        /* DO NOT REMOVE THE FOLLOWING CALL TO MD_Update()! */
        if (!MD_Update(m, buf, j))
            goto err;
        /*
         * We know that line may cause programs such as purify and valgrind
         * to complain about use of uninitialized data.  The problem is not,
         * it's with the caller.  Removing that line will make sure you get
         * really bad randomness and thereby other problems such as very
         * insecure keys.
         */

        if (!MD_Update(m, (unsigned char *)&(md_c[0]), sizeof(md_c)))
            goto err;
        if (!MD_Final(m, local_md))
            goto err;
        md_c[1]++;

        buf = (const char *)buf + j;

        for (k = 0; k < j; k++) {
            /*
             * Parallel threads may interfere with this, but always each byte
             * of the new state is the XOR of some previous value of its and
             * local_md (intermediate values may be lost). Alway using locking
             * could hurt performance more than necessary given that
             * conflicts occur only when the total seeding is longer than the
             * random state.
             */
            state[st_idx++] ^= local_md[k];
            if (st_idx >= STATE_SIZE)
                st_idx = 0;
        }
    }

    if (!do_not_lock)
        CRYPTO_THREAD_write_lock(rand_lock);
    /*
     * Don't just copy back local_md into md -- this could mean that other
     * thread's seeding remains without effect (except for the incremented
     * counter).  By XORing it we keep at least as much entropy as fits into
     * md.
     */
    for (k = 0; k < (int)sizeof(md); k++) {
        md[k] ^= local_md[k];
    }
    if (entropy < ENTROPY_NEEDED) /* stop counting when we have enough */
        entropy += add;
    if (!do_not_lock)
        CRYPTO_THREAD_unlock(rand_lock);

    rv = 1;
err:
    EVP_MD_CTX_free(m);
    return rv;
}