static void DoTestLockIntegrity(THREADID tid, THREAD_INFO *info, UINT32 *done)
{
// This test checks to see if two threads can be in the PIN_LOCK mutex
// simultaneously.
PIN_GetLock(&Lock, tid);
THREADID owner = HasLock;
HasLock = tid;
if (owner != INVALID_THREADID)
{
std::cout << "Two theads in lock simultaneously: " << std::dec << tid <<
" and " << owner << std::endl;
PIN_ExitProcess(1);
}
ATOMIC::OPS::Delay(DELAY_COUNT);
HasLock = INVALID_THREADID;
THREADID ret = PIN_ReleaseLock(&Lock);
if (ret != tid)
{
std::cout << "PIN_ReleaseLock returned unexpected value " << std::dec << ret <<
" (expected " << tid << ")" << std::endl;
PIN_ExitProcess(1);
}
CheckIfDone(info, done);
}
static void DoTestReaderTryStress(THREAD_INFO *info, UINT32 *done)
{
// Try to acquire / release PIN_RWMUTEX as a reader using "try" as fast as possible.
if (PIN_RWMutexTryReadLock(&RWMutex))
PIN_RWMutexUnlock(&RWMutex);
CheckIfDone(info, done);
}
static void DoTestMutexTryStress(THREAD_INFO *info, UINT32 *done)
{
// Try to acquire / release PIN_MUTEX as fast as possible, using "try".
if (PIN_MutexTryLock(&Mutex))
PIN_MutexUnlock(&Mutex);
CheckIfDone(info, done);
}
static void DoTestReaderStress(THREAD_INFO *info, UINT32 *done)
{
// This test just tries to acquire and release PIN_RWMUTEX as fast as possible
// as a reader lock.
PIN_RWMutexReadLock(&RWMutex);
PIN_RWMutexUnlock(&RWMutex);
CheckIfDone(info, done);
}
static void DoTestWriterStress(THREAD_INFO *info, UINT32 *done)
{
// This test just tries to acquire and release PIN_RWMUTEX as fast as possible
// as a writer lock to see if we can provoke a deadlock due to missing a wakeup.
PIN_RWMutexWriteLock(&RWMutex);
PIN_RWMutexUnlock(&RWMutex);
CheckIfDone(info, done);
}
static void DoTestLockStress(THREADID tid, THREAD_INFO *info, UINT32 *done)
{
// This test just tries to acquire and release PIN_LOCK as fast as possible
// to see if we can provoke a deadlock due to missing a wakeup.
PIN_GetLock(&Lock, tid);
PIN_ReleaseLock(&Lock);
CheckIfDone(info, done);
}
static void DoTestSemaphore(THREAD_INFO *info, UINT32 *done)
{
// This test assumes exactly two threads. The two threads take turns pinging
// each other's semaphore. We make sure that a thread does not wake up from
// the semaphore unless it is set. We also check for deadlocks due to missing
// wakeups.
if (info->_workerId == 0)
{
PIN_SemaphoreWait(&Sem1);
if (!PIN_SemaphoreIsSet(&Sem1))
{
std::cout << "SemaphoreWait returned, but semaphore is not set" << std::endl;
PIN_ExitProcess(1);
}
PIN_MutexLock(&Mutex);
PIN_SemaphoreClear(&Sem1);
PIN_SemaphoreSet(&Sem2);
PIN_MutexUnlock(&Mutex);
}
else
{
PIN_SemaphoreWait(&Sem2);
if (!PIN_SemaphoreIsSet(&Sem2))
{
std::cout << "SemaphoreWait returned, but semaphore is not set" << std::endl;
PIN_ExitProcess(1);
}
PIN_MutexLock(&Mutex);
PIN_SemaphoreClear(&Sem2);
PIN_SemaphoreSet(&Sem1);
PIN_MutexUnlock(&Mutex);
}
if (CheckIfDone(info, done))
{
PIN_SemaphoreSet(&Sem1);
PIN_SemaphoreSet(&Sem2);
}
}
static void DoTestReaderWriterIntegrity(THREAD_INFO *info, UINT32 *done)
{
// This test checks that a "writer" thread can never hold the lock while
// there is an active reader.
if (info->_workerId & 1)
{
// Reader thread.
//
PIN_RWMutexReadLock(&RWMutex);
ATOMIC::OPS::Increment(&ActiveReaders, 1);
if (ATOMIC::OPS::Load(&IsActiveWriter))
{
std::cout << "Reader got lock while there is an active writer" << std::endl;
PIN_ExitProcess(1);
}
ATOMIC::OPS::Delay(DELAY_COUNT);
ATOMIC::OPS::Increment(&ActiveReaders, -1);
PIN_RWMutexUnlock(&RWMutex);
}
else
{
// Writer thread.
//
PIN_RWMutexWriteLock(&RWMutex);
ATOMIC::OPS::Store<BOOL>(&IsActiveWriter, TRUE);
if (ATOMIC::OPS::Load(&ActiveReaders) != 0)
{
std::cout << "Writer has lock while there are active readers" << std::endl;
PIN_ExitProcess(1);
}
ATOMIC::OPS::Delay(DELAY_COUNT);
ATOMIC::OPS::Store<BOOL>(&IsActiveWriter, FALSE);
PIN_RWMutexUnlock(&RWMutex);
}
CheckIfDone(info, done);
}
static void DoTestReaderWriterStress(THREAD_INFO *info, UINT32 *done)
{
// This test uses a mix of "reader" and "writer" threads to acquire and
// release the PIN_RWMUTEX as fast as possible.
if (info->_workerId & 1)
{
// Reader thread.
//
PIN_RWMutexReadLock(&RWMutex);
PIN_RWMutexUnlock(&RWMutex);
}
else
{
// Writer thread.
//
PIN_RWMutexWriteLock(&RWMutex);
PIN_RWMutexUnlock(&RWMutex);
}
CheckIfDone(info, done);
}
static void DoTestWriterIntegrity(THREADID tid, THREAD_INFO *info, UINT32 *done)
{
// This test checks to see if two writer threads can be in the PIN_RWMUTEX mutex
// simultaneously.
PIN_RWMutexWriteLock(&RWMutex);
THREADID owner = HasLock;
HasLock = tid;
if (owner != INVALID_THREADID)
{
std::cout << "Two writer theads in rwmutex simultaneously: " << std::dec << tid <<
" and " << owner << std::endl;
PIN_ExitProcess(1);
}
ATOMIC::OPS::Delay(DELAY_COUNT);
HasLock = INVALID_THREADID;
PIN_RWMutexUnlock(&RWMutex);
CheckIfDone(info, done);
}
/**
Submits control transfer to a target USB device.
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
@param DeviceAddress The target device address.
@param DeviceSpeed Target device speed.
@param MaximumPacketLength Maximum packet size the default control transfer
endpoint is capable of sending or receiving.
@param Request USB device request to send.
@param TransferDirection Specifies the data direction for the data stage.
@param Data Data buffer to be transmitted or received from USB device.
@param DataLength The size (in bytes) of the data buffer.
@param TimeOut Indicates the maximum timeout, in millisecond.
@param TransferResult Return the result of this control transfer.
@retval EFI_SUCCESS Transfer was completed successfully.
@retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resources.
@retval EFI_INVALID_PARAMETER Some parameters are invalid.
@retval EFI_TIMEOUT Transfer failed due to timeout.
@retval EFI_DEVICE_ERROR Transfer failed due to host controller or device error.
**/
EFI_STATUS
EFIAPI
OhciControlTransfer (
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB_HOST_CONTROLLER_PPI *This,
IN UINT8 DeviceAddress,
IN UINT8 DeviceSpeed,
IN UINT8 MaxPacketLength,
IN EFI_USB_DEVICE_REQUEST *Request,
IN EFI_USB_DATA_DIRECTION TransferDirection,
IN OUT VOID *Data,
IN OUT UINTN *DataLength,
IN UINTN TimeOut,
OUT UINT32 *TransferResult
)
{
USB_OHCI_HC_DEV *Ohc;
ED_DESCRIPTOR *Ed;
TD_DESCRIPTOR *HeadTd;
TD_DESCRIPTOR *SetupTd;
TD_DESCRIPTOR *DataTd;
TD_DESCRIPTOR *StatusTd;
TD_DESCRIPTOR *EmptyTd;
EFI_STATUS Status;
UINT32 DataPidDir;
UINT32 StatusPidDir;
UINTN TimeCount;
UINT32 ErrorCode;
UINTN ActualSendLength;
UINTN LeftLength;
UINT8 DataToggle;
EFI_PHYSICAL_ADDRESS ReqMapPhyAddr = 0;
UINTN DataMapLength = 0;
EFI_PHYSICAL_ADDRESS DataMapPhyAddr = 0;
HeadTd = NULL;
DataTd = NULL;
if ((TransferDirection != EfiUsbDataOut && TransferDirection != EfiUsbDataIn &&
TransferDirection != EfiUsbNoData) ||
Request == NULL || DataLength == NULL || TransferResult == NULL ||
(TransferDirection == EfiUsbNoData && (*DataLength != 0 || Data != NULL)) ||
(TransferDirection != EfiUsbNoData && (*DataLength == 0 || Data == NULL)) ||
(DeviceSpeed != EFI_USB_SPEED_LOW && DeviceSpeed != EFI_USB_SPEED_FULL) ||
(MaxPacketLength != 8 && MaxPacketLength != 16 &&
MaxPacketLength != 32 && MaxPacketLength != 64)) {
DEBUG ((EFI_D_INFO, "OhciControlTransfer: EFI_INVALID_PARAMETER\n"));
return EFI_INVALID_PARAMETER;
}
if (*DataLength > MAX_BYTES_PER_TD) {
DEBUG ((EFI_D_ERROR, "OhciControlTransfer: Request data size is too large\n"));
return EFI_INVALID_PARAMETER;
}
Ohc = PEI_RECOVERY_USB_OHC_DEV_FROM_EHCI_THIS(This);
if (TransferDirection == EfiUsbDataIn) {
DataPidDir = TD_IN_PID;
StatusPidDir = TD_OUT_PID;
} else {
DataPidDir = TD_OUT_PID;
StatusPidDir = TD_IN_PID;
}
OhciSetHcControl (Ohc, CONTROL_ENABLE, 0);
if (OhciGetHcControl (Ohc, CONTROL_ENABLE) != 0) {
MicroSecondDelay (HC_1_MILLISECOND);
if (OhciGetHcControl (Ohc, CONTROL_ENABLE) != 0) {
*TransferResult = EFI_USB_ERR_SYSTEM;
DEBUG ((EFI_D_INFO, "OhciControlTransfer: Fail to disable CONTROL transfer\n"));
return EFI_DEVICE_ERROR;
}
}
OhciSetMemoryPointer (Ohc, HC_CONTROL_HEAD, NULL);
Ed = OhciCreateED (Ohc);
if (Ed == NULL) {
DEBUG ((EFI_D_INFO, "OhciControlTransfer: Fail to allocate ED buffer\n"));
return EFI_OUT_OF_RESOURCES;
}
OhciSetEDField (Ed, ED_SKIP, 1);
OhciSetEDField (Ed, ED_FUNC_ADD, DeviceAddress);
OhciSetEDField (Ed, ED_ENDPT_NUM, 0);
OhciSetEDField (Ed, ED_DIR, ED_FROM_TD_DIR);
OhciSetEDField (Ed, ED_SPEED, DeviceSpeed);
OhciSetEDField (Ed, ED_FORMAT | ED_HALTED | ED_DTTOGGLE, 0);
OhciSetEDField (Ed, ED_MAX_PACKET, MaxPacketLength);
OhciSetEDField (Ed, ED_PDATA, 0);
OhciSetEDField (Ed, ED_ZERO, 0);
OhciSetEDField (Ed, ED_TDHEAD_PTR, (UINT32) NULL);
OhciSetEDField (Ed, ED_TDTAIL_PTR, (UINT32) NULL);
OhciSetEDField (Ed, ED_NEXT_EDPTR, (UINT32) NULL);
OhciAttachEDToList (Ohc, CONTROL_LIST, Ed, NULL);
//
// Setup Stage
//
if(Request != NULL) {
ReqMapPhyAddr = (EFI_PHYSICAL_ADDRESS)(UINTN)Request;
}
SetupTd = OhciCreateTD (Ohc);
if (SetupTd == NULL) {
Status = EFI_OUT_OF_RESOURCES;
DEBUG ((EFI_D_INFO, "OhciControlTransfer: Fail to allocate Setup TD buffer\n"));
goto FREE_ED_BUFF;
}
HeadTd = SetupTd;
OhciSetTDField (SetupTd, TD_PDATA, 0);
OhciSetTDField (SetupTd, TD_BUFFER_ROUND, 1);
OhciSetTDField (SetupTd, TD_DIR_PID, TD_SETUP_PID);
OhciSetTDField (SetupTd, TD_DELAY_INT, TD_NO_DELAY);
OhciSetTDField (SetupTd, TD_DT_TOGGLE, 2);
OhciSetTDField (SetupTd, TD_ERROR_CNT, 0);
OhciSetTDField (SetupTd, TD_COND_CODE, TD_TOBE_PROCESSED);
OhciSetTDField (SetupTd, TD_CURR_BUFFER_PTR, (UINTN)ReqMapPhyAddr);
OhciSetTDField (SetupTd, TD_NEXT_PTR, (UINT32) NULL);
OhciSetTDField (SetupTd, TD_BUFFER_END_PTR, (UINTN)ReqMapPhyAddr + sizeof (EFI_USB_DEVICE_REQUEST) - 1);
SetupTd->ActualSendLength = 0;
SetupTd->DataBuffer = NULL;
SetupTd->NextTDPointer = NULL;
DataMapLength = *DataLength;
if ((Data != NULL) && (DataMapLength != 0)) {
DataMapPhyAddr = (EFI_PHYSICAL_ADDRESS)(UINTN)Data;
}
//
//Data Stage
//
LeftLength = DataMapLength;
ActualSendLength = DataMapLength;
DataToggle = 1;
while (LeftLength > 0) {
ActualSendLength = LeftLength;
if (LeftLength > MaxPacketLength) {
ActualSendLength = MaxPacketLength;
}
DataTd = OhciCreateTD (Ohc);
if (DataTd == NULL) {
DEBUG ((EFI_D_INFO, "OhciControlTransfer: Fail to allocate Data TD buffer\n"));
Status = EFI_OUT_OF_RESOURCES;
goto FREE_TD_BUFF;
}
OhciSetTDField (DataTd, TD_PDATA, 0);
OhciSetTDField (DataTd, TD_BUFFER_ROUND, 1);
OhciSetTDField (DataTd, TD_DIR_PID, DataPidDir);
OhciSetTDField (DataTd, TD_DELAY_INT, TD_NO_DELAY);
OhciSetTDField (DataTd, TD_DT_TOGGLE, DataToggle);
OhciSetTDField (DataTd, TD_ERROR_CNT, 0);
OhciSetTDField (DataTd, TD_COND_CODE, TD_TOBE_PROCESSED);
OhciSetTDField (DataTd, TD_CURR_BUFFER_PTR, (UINT32) DataMapPhyAddr);
OhciSetTDField (DataTd, TD_BUFFER_END_PTR, (UINT32) DataMapPhyAddr + ActualSendLength - 1);
OhciSetTDField (DataTd, TD_NEXT_PTR, (UINT32) NULL);
DataTd->ActualSendLength = ActualSendLength;
DataTd->DataBuffer = (UINT8 *)(UINTN)DataMapPhyAddr;
DataTd->NextTDPointer = 0;
OhciLinkTD (HeadTd, DataTd);
DataToggle ^= 1;
DataMapPhyAddr += ActualSendLength;
LeftLength -= ActualSendLength;
}
//
// Status Stage
//
StatusTd = OhciCreateTD (Ohc);
if (StatusTd == NULL) {
DEBUG ((EFI_D_INFO, "OhciControlTransfer: Fail to allocate Status TD buffer\n"));
Status = EFI_OUT_OF_RESOURCES;
goto FREE_TD_BUFF;
}
OhciSetTDField (StatusTd, TD_PDATA, 0);
OhciSetTDField (StatusTd, TD_BUFFER_ROUND, 1);
OhciSetTDField (StatusTd, TD_DIR_PID, StatusPidDir);
OhciSetTDField (StatusTd, TD_DELAY_INT, 7);
OhciSetTDField (StatusTd, TD_DT_TOGGLE, 3);
OhciSetTDField (StatusTd, TD_ERROR_CNT, 0);
OhciSetTDField (StatusTd, TD_COND_CODE, TD_TOBE_PROCESSED);
OhciSetTDField (StatusTd, TD_CURR_BUFFER_PTR, (UINT32) NULL);
OhciSetTDField (StatusTd, TD_NEXT_PTR, (UINT32) NULL);
OhciSetTDField (StatusTd, TD_BUFFER_END_PTR, (UINT32) NULL);
StatusTd->ActualSendLength = 0;
StatusTd->DataBuffer = NULL;
StatusTd->NextTDPointer = NULL;
OhciLinkTD (HeadTd, StatusTd);
//
// Empty Stage
//
EmptyTd = OhciCreateTD (Ohc);
if (EmptyTd == NULL) {
Status = EFI_OUT_OF_RESOURCES;
DEBUG ((EFI_D_INFO, "OhciControlTransfer: Fail to allocate Empty TD buffer\n"));
goto FREE_TD_BUFF;
}
OhciSetTDField (EmptyTd, TD_PDATA, 0);
OhciSetTDField (EmptyTd, TD_BUFFER_ROUND, 0);
OhciSetTDField (EmptyTd, TD_DIR_PID, 0);
OhciSetTDField (EmptyTd, TD_DELAY_INT, 0);
//OhciSetTDField (EmptyTd, TD_DT_TOGGLE, CurrentToggle);
EmptyTd->Word0.DataToggle = 0;
OhciSetTDField (EmptyTd, TD_ERROR_CNT, 0);
OhciSetTDField (EmptyTd, TD_COND_CODE, 0);
OhciSetTDField (EmptyTd, TD_CURR_BUFFER_PTR, 0);
OhciSetTDField (EmptyTd, TD_BUFFER_END_PTR, 0);
OhciSetTDField (EmptyTd, TD_NEXT_PTR, 0);
EmptyTd->ActualSendLength = 0;
EmptyTd->DataBuffer = NULL;
EmptyTd->NextTDPointer = NULL;
OhciLinkTD (HeadTd, EmptyTd);
Ed->TdTailPointer = EmptyTd;
OhciAttachTDListToED (Ed, HeadTd);
//
OhciSetEDField (Ed, ED_SKIP, 0);
MicroSecondDelay (20 * HC_1_MILLISECOND);
OhciSetHcCommandStatus (Ohc, CONTROL_LIST_FILLED, 1);
OhciSetHcControl (Ohc, CONTROL_ENABLE, 1);
MicroSecondDelay (20 * HC_1_MILLISECOND);
if (OhciGetHcControl (Ohc, CONTROL_ENABLE) != 1) {
MicroSecondDelay (HC_1_MILLISECOND);
if (OhciGetHcControl (Ohc, CONTROL_ENABLE) != 1) {
*TransferResult = EFI_USB_ERR_SYSTEM;
Status = EFI_DEVICE_ERROR;
DEBUG ((EFI_D_INFO, "OhciControlTransfer: Fail to enable CONTROL transfer\n"));
goto FREE_TD_BUFF;
}
}
TimeCount = 0;
Status = CheckIfDone (Ohc, CONTROL_LIST, Ed, HeadTd, &ErrorCode);
while (Status == EFI_NOT_READY && TimeCount <= TimeOut) {
MicroSecondDelay (HC_1_MILLISECOND);
TimeCount++;
Status = CheckIfDone (Ohc, CONTROL_LIST, Ed, HeadTd, &ErrorCode);
}
//
*TransferResult = ConvertErrorCode (ErrorCode);
if (ErrorCode != TD_NO_ERROR) {
if (ErrorCode == TD_TOBE_PROCESSED) {
DEBUG ((EFI_D_INFO, "Control pipe timeout, > %d mS\r\n", TimeOut));
} else {
DEBUG ((EFI_D_INFO, "Control pipe broken\r\n"));
}
*DataLength = 0;
}
OhciSetHcControl (Ohc, CONTROL_ENABLE, 0);
if (OhciGetHcControl (Ohc, CONTROL_ENABLE) != 0) {
MicroSecondDelay (HC_1_MILLISECOND);
if (OhciGetHcControl (Ohc, CONTROL_ENABLE) != 0) {
*TransferResult = EFI_USB_ERR_SYSTEM;
DEBUG ((EFI_D_INFO, "OhciControlTransfer: Cannot disable CONTROL_ENABLE transfer\n"));
goto FREE_TD_BUFF;
}
}
FREE_TD_BUFF:
while (HeadTd) {
DataTd = HeadTd;
HeadTd = HeadTd->NextTDPointer;
UsbHcFreeMem(Ohc->MemPool, DataTd, sizeof(TD_DESCRIPTOR));
}
FREE_ED_BUFF:
UsbHcFreeMem(Ohc->MemPool, Ed, sizeof(ED_DESCRIPTOR));
return Status;
}
/**
Submits bulk transfer to a bulk endpoint of a USB device.
@param PeiServices The pointer of EFI_PEI_SERVICES.
@param This The pointer of PEI_USB_HOST_CONTROLLER_PPI.
@param DeviceAddress Target device address.
@param EndPointAddress Endpoint number and its direction in bit 7.
@param MaxiPacketLength Maximum packet size the endpoint is capable of
sending or receiving.
@param Data A pointers to the buffers of data to transmit
from or receive into.
@param DataLength The lenght of the data buffer.
@param DataToggle On input, the initial data toggle for the transfer;
On output, it is updated to to next data toggle to use of
the subsequent bulk transfer.
@param TimeOut Indicates the maximum time, in millisecond, which the
transfer is allowed to complete.
@param TransferResult A pointer to the detailed result information of the
bulk transfer.
@retval EFI_SUCCESS The transfer was completed successfully.
@retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resource.
@retval EFI_INVALID_PARAMETER Parameters are invalid.
@retval EFI_TIMEOUT The transfer failed due to timeout.
@retval EFI_DEVICE_ERROR The transfer failed due to host controller error.
**/
EFI_STATUS
EFIAPI
OhciBulkTransfer (
IN EFI_PEI_SERVICES **PeiServices,
IN PEI_USB_HOST_CONTROLLER_PPI *This,
IN UINT8 DeviceAddress,
IN UINT8 EndPointAddress,
IN UINT8 MaxPacketLength,
IN OUT VOID *Data,
IN OUT UINTN *DataLength,
IN OUT UINT8 *DataToggle,
IN UINTN TimeOut,
OUT UINT32 *TransferResult
)
{
USB_OHCI_HC_DEV *Ohc;
ED_DESCRIPTOR *Ed;
UINT32 DataPidDir;
TD_DESCRIPTOR *HeadTd;
TD_DESCRIPTOR *DataTd;
TD_DESCRIPTOR *EmptyTd;
EFI_STATUS Status;
UINT8 EndPointNum;
UINTN TimeCount;
UINT32 ErrorCode;
UINT8 CurrentToggle;
UINTN MapLength;
EFI_PHYSICAL_ADDRESS MapPyhAddr;
UINTN LeftLength;
UINTN ActualSendLength;
BOOLEAN FirstTD;
MapLength = 0;
MapPyhAddr = 0;
LeftLength = 0;
Status = EFI_SUCCESS;
if (Data == NULL || DataLength == NULL || DataToggle == NULL || TransferResult == NULL ||
*DataLength == 0 || (*DataToggle != 0 && *DataToggle != 1) ||
(MaxPacketLength != 8 && MaxPacketLength != 16 &&
MaxPacketLength != 32 && MaxPacketLength != 64)) {
return EFI_INVALID_PARAMETER;
}
Ohc = PEI_RECOVERY_USB_OHC_DEV_FROM_EHCI_THIS (This);
if ((EndPointAddress & 0x80) != 0) {
DataPidDir = TD_IN_PID;
} else {
DataPidDir = TD_OUT_PID;
}
EndPointNum = (EndPointAddress & 0xF);
OhciSetHcControl (Ohc, BULK_ENABLE, 0);
if (OhciGetHcControl (Ohc, BULK_ENABLE) != 0) {
MicroSecondDelay (HC_1_MILLISECOND);
if (OhciGetHcControl (Ohc, BULK_ENABLE) != 0) {
*TransferResult = EFI_USB_ERR_SYSTEM;
return EFI_DEVICE_ERROR;
}
}
OhciSetMemoryPointer (Ohc, HC_BULK_HEAD, NULL);
Ed = OhciCreateED (Ohc);
if (Ed == NULL) {
DEBUG ((EFI_D_INFO, "OhcBulkTransfer: Fail to allocate ED buffer\r\n"));
return EFI_OUT_OF_RESOURCES;
}
OhciSetEDField (Ed, ED_SKIP, 1);
OhciSetEDField (Ed, ED_FUNC_ADD, DeviceAddress);
OhciSetEDField (Ed, ED_ENDPT_NUM, EndPointNum);
OhciSetEDField (Ed, ED_DIR, ED_FROM_TD_DIR);
OhciSetEDField (Ed, ED_SPEED, HI_SPEED);
OhciSetEDField (Ed, ED_FORMAT | ED_HALTED | ED_DTTOGGLE, 0);
OhciSetEDField (Ed, ED_MAX_PACKET, MaxPacketLength);
OhciSetEDField (Ed, ED_PDATA, 0);
OhciSetEDField (Ed, ED_ZERO, 0);
OhciSetEDField (Ed, ED_TDHEAD_PTR, (UINT32) NULL);
OhciSetEDField (Ed, ED_TDTAIL_PTR, (UINT32) NULL);
OhciSetEDField (Ed, ED_NEXT_EDPTR, (UINT32) NULL);
OhciAttachEDToList (Ohc, BULK_LIST, Ed, NULL);
if(Data != NULL) {
MapLength = *DataLength;
MapPyhAddr = (EFI_PHYSICAL_ADDRESS)(UINTN)Data;
}
//
//Data Stage
//
LeftLength = MapLength;
ActualSendLength = MapLength;
CurrentToggle = *DataToggle;
HeadTd = NULL;
FirstTD = TRUE;
while (LeftLength > 0) {
ActualSendLength = LeftLength;
if (LeftLength > MaxPacketLength) {
ActualSendLength = MaxPacketLength;
}
DataTd = OhciCreateTD (Ohc);
if (DataTd == NULL) {
DEBUG ((EFI_D_INFO, "OhcBulkTransfer: Fail to allocate Data TD buffer\r\n"));
Status = EFI_OUT_OF_RESOURCES;
goto FREE_TD_BUFF;
}
OhciSetTDField (DataTd, TD_PDATA, 0);
OhciSetTDField (DataTd, TD_BUFFER_ROUND, 1);
OhciSetTDField (DataTd, TD_DIR_PID, DataPidDir);
OhciSetTDField (DataTd, TD_DELAY_INT, TD_NO_DELAY);
OhciSetTDField (DataTd, TD_DT_TOGGLE, CurrentToggle);
OhciSetTDField (DataTd, TD_ERROR_CNT, 0);
OhciSetTDField (DataTd, TD_COND_CODE, TD_TOBE_PROCESSED);
OhciSetTDField (DataTd, TD_CURR_BUFFER_PTR, (UINT32) MapPyhAddr);
OhciSetTDField (DataTd, TD_BUFFER_END_PTR, (UINT32) MapPyhAddr + ActualSendLength - 1);
OhciSetTDField (DataTd, TD_NEXT_PTR, (UINT32) NULL);
DataTd->ActualSendLength = ActualSendLength;
DataTd->DataBuffer = (UINT8 *)(UINTN)MapPyhAddr;
DataTd->NextTDPointer = 0;
if (FirstTD) {
HeadTd = DataTd;
FirstTD = FALSE;
} else {
OhciLinkTD (HeadTd, DataTd);
}
CurrentToggle ^= 1;
MapPyhAddr += ActualSendLength;
LeftLength -= ActualSendLength;
}
//
// Empty Stage
//
EmptyTd = OhciCreateTD (Ohc);
if (EmptyTd == NULL) {
Status = EFI_OUT_OF_RESOURCES;
DEBUG ((EFI_D_INFO, "OhcBulkTransfer: Fail to allocate Empty TD buffer\r\n"));
goto FREE_TD_BUFF;
}
OhciSetTDField (EmptyTd, TD_PDATA, 0);
OhciSetTDField (EmptyTd, TD_BUFFER_ROUND, 0);
OhciSetTDField (EmptyTd, TD_DIR_PID, 0);
OhciSetTDField (EmptyTd, TD_DELAY_INT, 0);
//OhciSetTDField (EmptyTd, TD_DT_TOGGLE, CurrentToggle);
EmptyTd->Word0.DataToggle = 0;
OhciSetTDField (EmptyTd, TD_ERROR_CNT, 0);
OhciSetTDField (EmptyTd, TD_COND_CODE, 0);
OhciSetTDField (EmptyTd, TD_CURR_BUFFER_PTR, 0);
OhciSetTDField (EmptyTd, TD_BUFFER_END_PTR, 0);
OhciSetTDField (EmptyTd, TD_NEXT_PTR, 0);
EmptyTd->ActualSendLength = 0;
EmptyTd->DataBuffer = NULL;
EmptyTd->NextTDPointer = NULL;
OhciLinkTD (HeadTd, EmptyTd);
Ed->TdTailPointer = EmptyTd;
OhciAttachTDListToED (Ed, HeadTd);
OhciSetEDField (Ed, ED_SKIP, 0);
OhciSetHcCommandStatus (Ohc, BULK_LIST_FILLED, 1);
OhciSetHcControl (Ohc, BULK_ENABLE, 1);
if (OhciGetHcControl (Ohc, BULK_ENABLE) != 1) {
MicroSecondDelay (HC_1_MILLISECOND);
if (OhciGetHcControl (Ohc, BULK_ENABLE) != 1) {
*TransferResult = EFI_USB_ERR_SYSTEM;
goto FREE_TD_BUFF;
}
}
TimeCount = 0;
Status = CheckIfDone (Ohc, BULK_LIST, Ed, HeadTd, &ErrorCode);
while (Status == EFI_NOT_READY && TimeCount <= TimeOut) {
MicroSecondDelay (HC_1_MILLISECOND);
TimeCount++;
Status = CheckIfDone (Ohc, BULK_LIST, Ed, HeadTd, &ErrorCode);
}
*TransferResult = ConvertErrorCode (ErrorCode);
if (ErrorCode != TD_NO_ERROR) {
if (ErrorCode == TD_TOBE_PROCESSED) {
DEBUG ((EFI_D_INFO, "Bulk pipe timeout, > %d mS\r\n", TimeOut));
} else {
DEBUG ((EFI_D_INFO, "Bulk pipe broken\r\n"));
}
*DataLength = 0;
}
*DataToggle = (UINT8) OhciGetEDField (Ed, ED_DTTOGGLE);
FREE_TD_BUFF:
while (HeadTd) {
DataTd = HeadTd;
HeadTd = HeadTd->NextTDPointer;
UsbHcFreeMem(Ohc->MemPool, DataTd, sizeof(TD_DESCRIPTOR));
}
UsbHcFreeMem(Ohc->MemPool, Ed, sizeof(ED_DESCRIPTOR));
return Status;
}
