C++ (Cpp) CleanWb Beispiele

Beispiel #1

Datei: wb_master_module.cpp Projekt: samux/Etrange

 void     WbMasterModule<wb_param>:: reset()
 {
     trans_wait_cycles    = 0;
     num_writes           = 0;
     num_reads            = 0;
     CleanWb();
 }

Beispiel #2

Datei: wb_master_module.cpp Projekt: samux/Etrange

        void WbMasterModule<wb_param>::wb_read_blk
        ( uint32_t saddr, uint32_t num, uint32_t *dest)
        {
#if DEBUG_WB
			std::cout << "WBMaster lit "<< num << "mots en " << saddr << std::endl;
#endif
            for (uint32_t i = 0; i< num; i++)
            {
                sc_core::wait(p_clk.negedge_event());
                p_wb.ADR_O = saddr;
                p_wb.SEL_O = 0xF;
                p_wb.STB_O = true;
                p_wb.CYC_O = true;
                p_wb.WE_O  = false;

                // sc_core::wait for ack
                WaitWbAck();
#if DEBUG_WB2
				std::cout << "Ack WBM lecture OK" << std::endl;
#endif
                num_reads++;
                *dest++ = (uint32_t) p_wb.DAT_I.read();
                // next data
                saddr = saddr + 4;
            }
            // clean request after clk falling edge
            sc_core::wait(p_clk.negedge_event());
            CleanWb();
#if DEBUG_WB
			std::cout << "WBMaster lecture OK" << std::endl;
#endif
        }

Beispiel #3

Datei: wb_master_module.cpp Projekt: samux/Etrange

        void     WbMasterModule<wb_param>::wb_write_blk
        ( uint32_t saddr, uint8_t *mask, uint32_t *data, uint32_t num)
        {
#if DEBUG_WB
			std::cout << "WBmaster ecrit" << std::endl;
			std::cout << "WBMaster ecrit "<< num << "mots en " << saddr << std::endl;
#endif
            for (uint32_t i = 0; i< num; i++)
            {
                // set request on clk falling edge
                sc_core::wait(p_clk.negedge_event());
                p_wb.DAT_O = *data++;
                p_wb.ADR_O = saddr;
                p_wb.SEL_O = *mask++;
                p_wb.STB_O = true;
                p_wb.CYC_O = true;
                p_wb.WE_O  = true;
                // sc_core::wait for ack
                WaitWbAck();
#if DEBUG_WB2
				std::cout << "Ack WBM ecriture OK" << std::endl;
#endif
                num_writes++;
                // next data
                saddr = saddr + 4;
            }
            // clean request after clk falling edge
            sc_core::wait(p_clk.negedge_event());
            CleanWb();
#if DEBUG_WB
			std::cout << "WBMaster ecriture OK" << std::endl;
#endif
        }

Beispiel #4

Datei: wb_master_module.cpp Projekt: samux/Etrange

        void     WbMasterModule<wb_param>::wb_write_at
        (uint32_t addr, uint8_t mask, uint32_t data)
        {
            // set request on clk falling edge
            sc_core::wait(p_clk.negedge_event());
            p_wb.DAT_O = data;
            p_wb.ADR_O = addr;
            p_wb.SEL_O = mask;
            p_wb.STB_O = true;
            p_wb.CYC_O = true;
            p_wb.WE_O  = true;

            // sc_core::wait for ack
            WaitWbAck();
            // clean request after clk falling edge
            sc_core::wait(p_clk.negedge_event());
            CleanWb();
            num_writes++;
        }

Beispiel #5

Datei: wb_master_module.cpp Projekt: samux/Etrange

        uint32_t WbMasterModule<wb_param>::wb_read_at
        ( uint32_t addr )
        {
            uint32_t tmp;
            sc_core::wait(p_clk.negedge_event());
            p_wb.ADR_O = addr;
            p_wb.SEL_O = 0xF;
            p_wb.STB_O = true;
            p_wb.CYC_O = true;
            p_wb.WE_O  = false;

            // sc_core::wait for ack
            WaitWbAck();
            tmp = (uint32_t) p_wb.DAT_I.read();
            // clean request after clk falling edge
            sc_core::wait(p_clk.negedge_event());
            CleanWb();
            num_reads++;
            return tmp;
        }

Beispiel #6

Datei: wb_master_module.cpp Projekt: vaibhav3002/soc_etrange_team_four

void WbMasterModule<wb_param>::wb_read_blk
( uint32_t saddr, uint32_t num, uint32_t *dest)
{
    for (uint32_t i = 0; i< num; i++)
    {
        sc_core::wait(p_clk.negedge_event());
        p_wb.ADR_O = saddr;
        p_wb.SEL_O = 0xF;
        p_wb.STB_O = true;
        p_wb.CYC_O = true;
        p_wb.WE_O  = false;

        // sc_core::wait for ack
        WaitWbAck();
        num_reads++;
        *dest++ = (uint32_t) p_wb.DAT_I.read();
        // next data
        saddr = saddr + 4;
    }
    // clean request after clk falling edge
    sc_core::wait(p_clk.negedge_event());
    CleanWb();
}

Beispiel #7

Datei: wb_master_module.cpp Projekt: vaibhav3002/soc_etrange_team_four

void     WbMasterModule<wb_param>::wb_write_blk
( uint32_t saddr, uint8_t *mask, uint32_t *data, uint32_t num)
{
    for (uint32_t i = 0; i< num; i++)
    {
        // set request on clk falling edge
        sc_core::wait(p_clk.negedge_event());
        p_wb.DAT_O = *data++;
        p_wb.ADR_O = saddr;
        p_wb.SEL_O = *mask++;
        p_wb.STB_O = true;
        p_wb.CYC_O = true;
        p_wb.WE_O  = true;

        // sc_core::wait for ack
        WaitWbAck();
        num_writes++;
        // next data
        saddr = saddr + 4;
    }
    // clean request after clk falling edge
    sc_core::wait(p_clk.negedge_event());
    CleanWb();
}