void EDA_DRAW_FRAME::LoadSettings( wxConfigBase* aCfg )
{
EDA_BASE_FRAME::LoadSettings( aCfg );
aCfg->Read( m_FrameName + CursorShapeEntryKeyword, &m_cursorShape, ( long )0 );
bool btmp;
if( aCfg->Read( m_FrameName + ShowGridEntryKeyword, &btmp ) )
SetGridVisibility( btmp );
int itmp;
if( aCfg->Read( m_FrameName + GridColorEntryKeyword, &itmp ) )
SetGridColor( ColorFromInt( itmp ) );
aCfg->Read( m_FrameName + LastGridSizeIdKeyword, &m_LastGridSizeId, 0L );
// m_LastGridSizeId is an offset, expected to be >= 0
if( m_LastGridSizeId < 0 )
m_LastGridSizeId = 0;
}
void EDA_APP::GetSettings( bool aReopenLastUsedDirectory )
{
wxASSERT( m_settings != NULL && m_commonSettings != NULL );
wxString Line;
m_HelpSize.x = 500;
m_HelpSize.y = 400;
wxString languageSel;
m_commonSettings->Read( languageCfgKey, &languageSel );
m_LanguageId = wxLANGUAGE_DEFAULT;
// Search for the current selection
for( unsigned int ii = 0; ii < LANGUAGE_DESCR_COUNT; ii++ )
{
if( s_Language_List[ii].m_Lang_Label == languageSel )
{
m_LanguageId = s_Language_List[ii].m_WX_Lang_Identifier;
break;
}
}
m_EditorName = m_commonSettings->Read( wxT( "Editor" ) );
m_fileHistory.Load( *m_settings );
m_settings->Read( showPageLimitsKey, &g_ShowPageLimits );
if( aReopenLastUsedDirectory )
{
if( m_settings->Read( workingDirKey, &Line ) && wxDirExists( Line ) )
{
wxSetWorkingDirectory( Line );
}
}
// FIXME OSX Mountain Lion (10.8)
// Seems that Read doesn't found anything and ColorFromInt Asserts - I'm unable to reproduce
// on 10.7
// In general terms I think is better have a failsafe default than an uninit variable
int draw_bg_color = (int)BLACK; // Default for all apps but Eeschema
if( m_Id == APP_EESCHEMA_T )
draw_bg_color = (int)WHITE; // Default for Eeschema
m_settings->Read( backgroundColorKey, &draw_bg_color );
g_DrawBgColor = ColorFromInt( draw_bg_color );
// Load per-user search paths from settings file
wxString upath;
int i = 1;
while( 1 )
{
upath = m_commonSettings->Read( wxString::Format( wxT( "LibraryPath%d" ), i ),
wxT( "" ) );
if( upath.IsSameAs( wxT( "" ) ) )
break;
m_libSearchPaths.Add( upath );
i ++;
}
}
/* Creates the plot for silkscreen layers
* Silkscreen layers have specific requirement for pads (not filled) and texts
* (with option to remove them from some copper areas (pads...)
*/
void PlotSilkScreen( BOARD *aBoard, PLOTTER* aPlotter, LAYER_MSK aLayerMask,
const PCB_PLOT_PARAMS& aPlotOpt )
{
BRDITEMS_PLOTTER itemplotter( aPlotter, aBoard, aPlotOpt );
itemplotter.SetLayerMask( aLayerMask );
// Plot edge layer and graphic items
itemplotter.PlotBoardGraphicItems();
// Plot footprint outlines :
itemplotter.Plot_Edges_Modules();
// Plot pads (creates pads outlines, for pads on silkscreen layers)
int layersmask_plotpads = aLayerMask;
// Calculate the mask layers of allowed layers for pads
if( !aPlotOpt.GetPlotPadsOnSilkLayer() ) // Do not plot pads on silk screen layers
layersmask_plotpads &= ~(SILKSCREEN_LAYER_BACK | SILKSCREEN_LAYER_FRONT );
if( layersmask_plotpads )
{
for( MODULE* Module = aBoard->m_Modules; Module; Module = Module->Next() )
{
for( D_PAD * pad = Module->Pads(); pad != NULL; pad = pad->Next() )
{
// See if the pad is on this layer
LAYER_MSK masklayer = pad->GetLayerMask();
if( (masklayer & layersmask_plotpads) == 0 )
continue;
EDA_COLOR_T color = ColorFromInt(0);
if( (layersmask_plotpads & SILKSCREEN_LAYER_BACK) )
color = aBoard->GetLayerColor( SILKSCREEN_N_BACK );
if((layersmask_plotpads & SILKSCREEN_LAYER_FRONT ) )
color = ColorFromInt( color | aBoard->GetLayerColor( SILKSCREEN_N_FRONT ) );
itemplotter.PlotPad( pad, color, LINE );
}
}
}
// Plot footprints fields (ref, value ...)
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
if( ! itemplotter.PlotAllTextsModule( module ) )
{
wxLogMessage( _( "Your BOARD has a bad layer number for module %s" ),
GetChars( module->GetReference() ) );
}
}
// Plot filled areas
for( int ii = 0; ii < aBoard->GetAreaCount(); ii++ )
{
ZONE_CONTAINER* edge_zone = aBoard->GetArea( ii );
if( ( GetLayerMask( edge_zone->GetLayer() ) & aLayerMask ) == 0 )
continue;
itemplotter.PlotFilledAreas( edge_zone );
}
// Plot segments used to fill zone areas (outdated, but here for old boards
// compatibility):
for( SEGZONE* seg = aBoard->m_Zone; seg != NULL; seg = seg->Next() )
{
if( ( GetLayerMask( seg->GetLayer() ) & aLayerMask ) == 0 )
continue;
aPlotter->ThickSegment( seg->GetStart(), seg->GetEnd(), seg->GetWidth(),
itemplotter.GetMode() );
}
}
/* Plot a copper layer or mask.
* Silk screen layers are not plotted here.
*/
void PlotStandardLayer( BOARD *aBoard, PLOTTER* aPlotter,
LAYER_MSK aLayerMask, const PCB_PLOT_PARAMS& aPlotOpt )
{
BRDITEMS_PLOTTER itemplotter( aPlotter, aBoard, aPlotOpt );
itemplotter.SetLayerMask( aLayerMask );
EDA_DRAW_MODE_T plotMode = aPlotOpt.GetMode();
// Plot edge layer and graphic items
itemplotter.PlotBoardGraphicItems();
// Draw footprint shapes without pads (pads will plotted later)
// We plot here module texts, but they are usually on silkscreen layer,
// so they are not plot here but plot by PlotSilkScreen()
// Plot footprints fields (ref, value ...)
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
if( ! itemplotter.PlotAllTextsModule( module ) )
{
wxLogMessage( _( "Your BOARD has a bad layer number for module %s" ),
GetChars( module->GetReference() ) );
}
}
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
for( BOARD_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
{
if( ! (aLayerMask & GetLayerMask( item->GetLayer() ) ) )
continue;
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
itemplotter.Plot_1_EdgeModule( (EDGE_MODULE*) item );
break;
default:
break;
}
}
}
// Plot footprint pads
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
if( (pad->GetLayerMask() & aLayerMask) == 0 )
continue;
wxSize margin;
double width_adj = 0;
if( aLayerMask & ALL_CU_LAYERS )
width_adj = itemplotter.getFineWidthAdj();
switch( aLayerMask &
( SOLDERMASK_LAYER_BACK | SOLDERMASK_LAYER_FRONT |
SOLDERPASTE_LAYER_BACK | SOLDERPASTE_LAYER_FRONT ) )
{
case SOLDERMASK_LAYER_FRONT:
case SOLDERMASK_LAYER_BACK:
margin.x = margin.y = pad->GetSolderMaskMargin();
break;
case SOLDERPASTE_LAYER_FRONT:
case SOLDERPASTE_LAYER_BACK:
margin = pad->GetSolderPasteMargin();
break;
default:
break;
}
wxSize padPlotsSize;
padPlotsSize.x = pad->GetSize().x + ( 2 * margin.x ) + width_adj;
padPlotsSize.y = pad->GetSize().y + ( 2 * margin.y ) + width_adj;
// Don't draw a null size item :
if( padPlotsSize.x <= 0 || padPlotsSize.y <= 0 )
continue;
EDA_COLOR_T color = BLACK;
if( (pad->GetLayerMask() & LAYER_BACK) )
color = aBoard->GetVisibleElementColor( PAD_BK_VISIBLE );
if((pad->GetLayerMask() & LAYER_FRONT ) )
color = ColorFromInt( color | aBoard->GetVisibleElementColor( PAD_FR_VISIBLE ) );
// Temporary set the pad size to the required plot size:
wxSize tmppadsize = pad->GetSize();
pad->SetSize( padPlotsSize );
switch( pad->GetShape() )
{
case PAD_CIRCLE:
case PAD_OVAL:
if( aPlotOpt.GetSkipPlotNPTH_Pads() &&
(pad->GetSize() == pad->GetDrillSize()) &&
(pad->GetAttribute() == PAD_HOLE_NOT_PLATED) )
break;
// Fall through:
case PAD_TRAPEZOID:
case PAD_RECT:
default:
itemplotter.PlotPad( pad, color, plotMode );
break;
}
pad->SetSize( tmppadsize ); // Restore the pad size
}
}
// Plot vias on copper layers, and if aPlotOpt.GetPlotViaOnMaskLayer() is true,
// plot them on solder mask
for( TRACK* track = aBoard->m_Track; track; track = track->Next() )
{
const VIA* Via = dynamic_cast<const VIA*>( track );
if( !Via )
continue;
// vias are not plotted if not on selected layer, but if layer
// is SOLDERMASK_LAYER_BACK or SOLDERMASK_LAYER_FRONT,vias are drawn,
// only if they are on the corresponding external copper layer
int via_mask_layer = Via->GetLayerMask();
if( aPlotOpt.GetPlotViaOnMaskLayer() )
{
if( via_mask_layer & LAYER_BACK )
via_mask_layer |= SOLDERMASK_LAYER_BACK;
if( via_mask_layer & LAYER_FRONT )
via_mask_layer |= SOLDERMASK_LAYER_FRONT;
}
if( ( via_mask_layer & aLayerMask ) == 0 )
continue;
int via_margin = 0;
double width_adj = 0;
// If the current layer is a solder mask, use the global mask
// clearance for vias
if( ( aLayerMask & ( SOLDERMASK_LAYER_BACK | SOLDERMASK_LAYER_FRONT ) ) )
via_margin = aBoard->GetDesignSettings().m_SolderMaskMargin;
if( aLayerMask & ALL_CU_LAYERS )
width_adj = itemplotter.getFineWidthAdj();
int diameter = Via->GetWidth() + 2 * via_margin + width_adj;
// Don't draw a null size item :
if( diameter <= 0 )
continue;
EDA_COLOR_T color = aBoard->GetVisibleElementColor(VIAS_VISIBLE + Via->GetViaType());
// Set plot color (change WHITE to LIGHTGRAY because
// the white items are not seen on a white paper or screen
aPlotter->SetColor( color != WHITE ? color : LIGHTGRAY);
aPlotter->FlashPadCircle( Via->GetStart(), diameter, plotMode );
}
// Plot tracks (not vias) :
for( TRACK* track = aBoard->m_Track; track; track = track->Next() )
{
if( track->Type() == PCB_VIA_T )
continue;
if( (GetLayerMask( track->GetLayer() ) & aLayerMask) == 0 )
continue;
int width = track->GetWidth() + itemplotter.getFineWidthAdj();
aPlotter->SetColor( itemplotter.getColor( track->GetLayer() ) );
aPlotter->ThickSegment( track->GetStart(), track->GetEnd(), width, plotMode );
}
// Plot zones (outdated, for old boards compatibility):
for( TRACK* track = aBoard->m_Zone; track; track = track->Next() )
{
if( (GetLayerMask( track->GetLayer() ) & aLayerMask) == 0 )
continue;
int width = track->GetWidth() + itemplotter.getFineWidthAdj();
aPlotter->SetColor( itemplotter.getColor( track->GetLayer() ) );
aPlotter->ThickSegment( track->GetStart(), track->GetEnd(), width, plotMode );
}
// Plot filled ares
for( int ii = 0; ii < aBoard->GetAreaCount(); ii++ )
{
ZONE_CONTAINER* zone = aBoard->GetArea( ii );
if( ( GetLayerMask(zone->GetLayer() ) & aLayerMask ) == 0 )
continue;
itemplotter.PlotFilledAreas( zone );
}
// Adding drill marks, if required and if the plotter is able to plot them:
if( aPlotOpt.GetDrillMarksType() != PCB_PLOT_PARAMS::NO_DRILL_SHAPE )
itemplotter.PlotDrillMarks();
}
