void View::DrawProportFigures(DeviceContext *dc, int x, int y, int num, int numBase, Staff *staff)
{
assert(dc);
assert(staff);
int ynum = 0, yden = 0;
int textSize = PROPRT_SIZE_FACTOR * staff->m_drawingStaffSize;
std::wstring wtext;
if (numBase) {
ynum = y - (m_doc->GetDrawingUnit(textSize) * 2);
yden = ynum - (m_doc->GetDrawingDoubleUnit(textSize) * 2);
}
else
ynum = y - (m_doc->GetDrawingUnit(textSize) * 4);
if (numBase > 9 || num > 9) {
x += m_doc->GetDrawingUnit(textSize) * 2;
}
dc->SetFont(m_doc->GetDrawingSmuflFont(textSize, false));
wtext = IntToTimeSigFigures(num);
DrawSmuflString(dc, x, ynum, wtext, true, textSize); // true = center
if (numBase) {
wtext = IntToTimeSigFigures(numBase);
DrawSmuflString(dc, x, yden, wtext, true, textSize); // true = center
}
dc->ResetFont();
return;
}
void View::DrawTupletPostponed(DeviceContext *dc, Tuplet *tuplet, Layer *layer, Staff *staff)
{
assert(dc);
assert(tuplet);
assert(layer);
assert(staff);
if ((tuplet->GetBracketVisible() == BOOLEAN_false) && (tuplet->GetNumVisible() == BOOLEAN_false)) {
tuplet->SetEmptyBB();
return;
}
tuplet->ResetList(tuplet);
int txt_length = 0;
int txt_height = 0;
std::wstring notes;
//
dc->SetFont(m_doc->GetDrawingSmuflFont(staff->m_drawingStaffSize, tuplet->IsCueSize()));
if (tuplet->GetNum() > 0) {
notes = IntToTupletFigures((short int)tuplet->GetNum());
dc->GetSmuflTextExtent(notes, &txt_length, &txt_height);
}
Point start, end, center;
data_STEMDIRECTION direction = GetTupletCoordinates(tuplet, layer, &start, &end, ¢er);
// Calculate position for number 0x82
// since the number is slanted, move the center left
// by 4 pixels so it seems more centered to the eye
int txt_x = center.x - (txt_length / 2);
// we need to move down the figure of half of it height, which is about an accid width;
// also, cue size is not supported. Does it has to?
int txt_y
= center.y - m_doc->GetGlyphWidth(SMUFL_E262_accidentalSharp, staff->m_drawingStaffSize, tuplet->IsCueSize());
if (tuplet->GetNum() && (tuplet->GetNumVisible() != BOOLEAN_false)) {
DrawSmuflString(dc, txt_x, txt_y, notes, false, staff->m_drawingStaffSize);
}
dc->ResetFont();
// Nothing to do if the bracket is not visible
if (tuplet->GetBracketVisible() == BOOLEAN_false) {
return;
}
int verticalLine = m_doc->GetDrawingUnit(100);
dc->SetPen(m_currentColour, m_doc->GetDrawingStemWidth(staff->m_drawingStaffSize), AxSOLID);
// Start is 0 when no line is necessary (i.e. beamed notes)
if (start.x > 0) {
// Draw the bracket, interrupt where the number is
// get the slope
double m = (double)(start.y - end.y) / (double)(start.x - end.x);
// x = 10 pixels before the number
int x = txt_x - 40;
// xa = just after, the number is abundant so I do not add anything
int xa = txt_x + txt_length + 20;
// calculate the y coords in the slope
double y1 = (double)start.y + m * (x - (double)start.x);
double y2 = (double)start.y + m * (xa - (double)start.x);
if (tuplet->GetNumVisible() == BOOLEAN_false) {
// one single line
dc->DrawLine(start.x, ToDeviceContextY(start.y), end.x, ToDeviceContextY((int)y1));
}
else {
// first line
dc->DrawLine(start.x, ToDeviceContextY(start.y), (int)x, ToDeviceContextY((int)y1));
// second line after gap
dc->DrawLine((int)xa, ToDeviceContextY((int)y2), end.x, ToDeviceContextY(end.y));
}
// vertical bracket lines
if (direction == STEMDIRECTION_up) {
dc->DrawLine(start.x, ToDeviceContextY(start.y), start.x, ToDeviceContextY(start.y - verticalLine));
dc->DrawLine(end.x, ToDeviceContextY(end.y), end.x, ToDeviceContextY(end.y - verticalLine));
}
else {
dc->DrawLine(start.x, ToDeviceContextY(start.y), start.x, ToDeviceContextY(start.y + verticalLine));
dc->DrawLine(end.x, ToDeviceContextY(end.y), end.x, ToDeviceContextY(end.y + verticalLine));
}
}
dc->ResetPen();
}
void View::DrawTupletPostponed(DeviceContext *dc, Tuplet *tuplet, Layer *layer, Staff *staff)
{
assert(dc);
assert(tuplet);
assert(layer);
assert(staff);
if ((tuplet->GetBracketVisible() == BOOLEAN_false) && (tuplet->GetNumVisible() == BOOLEAN_false)) {
tuplet->SetEmptyBB();
return;
}
tuplet->ResetList(tuplet);
TextExtend extend;
std::wstring notes;
Point start, end, center;
data_STEMDIRECTION direction = GetTupletCoordinates(tuplet, layer, &start, &end, ¢er);
int x1 = center.x, x2 = center.x;
// draw tuplet numerator
if ((tuplet->GetNum() > 0) && (tuplet->GetNumVisible() != BOOLEAN_false)) {
bool drawingCueSize = tuplet->GetDrawingCueSize();
dc->SetFont(m_doc->GetDrawingSmuflFont(staff->m_drawingStaffSize, drawingCueSize));
notes = IntToTupletFigures((short int)tuplet->GetNum());
if (tuplet->GetNumFormat() == tupletVis_NUMFORMAT_ratio) {
notes.push_back(SMUFL_E88A_tupletColon);
notes = notes + IntToTupletFigures((short int)tuplet->GetNumbase());
}
dc->GetSmuflTextExtent(notes, &extend);
// Calculate position for number 0x82
// since the number is slanted, move the center left
int txtX = x1 - (extend.m_width / 2);
// and move it further, when it is under the stave
if (direction == STEMDIRECTION_down) {
txtX -= staff->m_drawingStaffSize;
}
// we need to move down the figure of half of it height, which is about an accid width;
// also, cue size is not supported. Does it has to?
int txt_y
= center.y - m_doc->GetGlyphWidth(SMUFL_E262_accidentalSharp, staff->m_drawingStaffSize, drawingCueSize);
DrawSmuflString(dc, txtX, txt_y, notes, false, staff->m_drawingStaffSize);
// x1 = 10 pixels before the number
x1 = ((txtX - 40) > start.x) ? txtX - 40 : start.x;
// x2 = just after, the number is abundant so I do not add anything
x2 = txtX + extend.m_width + 20;
dc->ResetFont();
}
// Nothing to do if the bracket is not visible
if (tuplet->GetBracketVisible() == BOOLEAN_false) {
return;
}
// If all tuplets beamed draw no bracket by default
if (OneBeamInTuplet(tuplet) && !(tuplet->GetBracketVisible() == BOOLEAN_true)) {
return;
}
int verticalLine = m_doc->GetDrawingUnit(100);
dc->SetPen(m_currentColour, m_doc->GetDrawingStemWidth(staff->m_drawingStaffSize), AxSOLID);
// Draw the bracket, interrupt where the number is
// get the slope
double m = (double)(start.y - end.y) / (double)(start.x - end.x);
// calculate the y coords in the slope
double y1 = (double)start.y + m * (x1 - (double)start.x);
double y2 = (double)start.y + m * (x2 - (double)start.x);
if (tuplet->GetNumVisible() == BOOLEAN_false) {
// one single line
dc->DrawLine(start.x, ToDeviceContextY(start.y), end.x, ToDeviceContextY(end.y));
}
else {
// first line
dc->DrawLine(start.x, ToDeviceContextY(start.y), (int)x1, ToDeviceContextY((int)y1));
// second line after gap
dc->DrawLine((int)x2, ToDeviceContextY((int)y2), end.x, ToDeviceContextY(end.y));
}
// vertical bracket lines
if (direction == STEMDIRECTION_up) {
dc->DrawLine(start.x + m_doc->GetDrawingStemWidth(staff->m_drawingStaffSize) / 2, ToDeviceContextY(start.y),
start.x + m_doc->GetDrawingStemWidth(staff->m_drawingStaffSize) / 2,
ToDeviceContextY(start.y - verticalLine));
dc->DrawLine(end.x - m_doc->GetDrawingStemWidth(staff->m_drawingStaffSize) / 2, ToDeviceContextY(end.y),
end.x - m_doc->GetDrawingStemWidth(staff->m_drawingStaffSize) / 2, ToDeviceContextY(end.y - verticalLine));
}
else {
dc->DrawLine(start.x + m_doc->GetDrawingStemWidth(staff->m_drawingStaffSize) / 2, ToDeviceContextY(start.y),
start.x + m_doc->GetDrawingStemWidth(staff->m_drawingStaffSize) / 2,
ToDeviceContextY(start.y + verticalLine));
dc->DrawLine(end.x - m_doc->GetDrawingStemWidth(staff->m_drawingStaffSize) / 2, ToDeviceContextY(end.y),
end.x - m_doc->GetDrawingStemWidth(staff->m_drawingStaffSize) / 2, ToDeviceContextY(end.y + verticalLine));
}
dc->ResetPen();
}