bool Device::checkCommandValue(){
if (EEPROMReadInt(PARAMS(deviceIdx, 2)) != FFFF) { // Threshold set
if (abs(previousCommandValue - commandValue) >= (EEPROMReadInt(PARAMS(deviceIdx, 2)))) {
previousCommandValue = commandValue;
return true;
}
}
return false;
}
void printPage(const byte clientsel, const byte deviceIdx) {
// Index
printP(clientsel, TXTIND);
printP(clientsel, TXTCOLON);
printV(clientsel, deviceIdx);
printP(clientsel, ANBSP);
// DeviceID
printP(clientsel, TXTDEVICEID);
printP(clientsel, TXTCOLON);
printV(clientsel, mdevices[deviceIdx].getDeviceID());
// Type
printP(clientsel, ANBSP);
if (mdevices[deviceIdx].getType() != 0) {
printP(clientsel, TXTTYPE);
printP(clientsel, TXTCOLON);
printV(clientsel, mdevices[deviceIdx].getType());
printP(clientsel, AOPEN);
printP(clientsel, BR);
printP(clientsel, SLASH);
printP(clientsel, ACLOSE);
}
// CommandID
printP(clientsel, TXTCOMMAND );
printP(clientsel, TXTCOLON);
printVstr(clientsel, mdevices[deviceIdx].getCommand());
// Status
printP(clientsel, ANBSP);
printP(clientsel, TXTSTATUS );
printP(clientsel, TXTCOLON);
printVstr(clientsel, mdevices[deviceIdx].getStatus());
// Value
if (mdevices[deviceIdx].commandValue != 0) {
printP(clientsel, ANBSP);
printP(clientsel, TXTVALUE );
printP(clientsel, TXTCOLON);
printVstr(clientsel, mdevices[deviceIdx].getValue());
}
// ExtData
if (printVstr(clientsel, mdevices[deviceIdx].getExtData(), true) > 0) {
printP(clientsel, AOPEN);
printP(clientsel, BR);
printP(clientsel, SLASH);
printP(clientsel, ACLOSE);
printP(clientsel, TXTEXTDATA );
printP(clientsel, TXTCOLON);
printVstr(clientsel, mdevices[deviceIdx].getExtData());
}
printP(clientsel, AOPEN);
printP(clientsel, BR);
printP(clientsel, SLASH);
printP(clientsel, ACLOSE);
if (EEPROMReadInt(PARAMS(deviceIdx, 1)) != FFFF) {
// Parameter 1
printP(clientsel, TXTPAR1);
printP(clientsel, TXTCOLON);
printV(clientsel, EEPROMReadInt(PARAMS(deviceIdx, 1)));
printP(clientsel, AOPEN);
printP(clientsel, BR);
printP(clientsel, SLASH);
printP(clientsel, ACLOSE);
}
if (EEPROMReadInt(PARAMS(deviceIdx, 2)) != FFFF) {
// Parameter 2
printP(clientsel, TXTPAR2);
printP(clientsel, TXTCOLON);
printV(clientsel, EEPROMReadInt(PARAMS(deviceIdx, 2)));
printP(clientsel, AOPEN);
printP(clientsel, BR);
printP(clientsel, SLASH);
printP(clientsel, ACLOSE);
}
if (EEPROMReadInt(PARAMS(deviceIdx, 3)) != FFFF) {
// Parameter 3
printP(clientsel, TXTPAR3);
printP(clientsel, TXTCOLON);
printV(clientsel, EEPROMReadInt(PARAMS(deviceIdx, 3)));
printP(clientsel, AOPEN);
printP(clientsel, BR);
printP(clientsel, SLASH);
printP(clientsel, ACLOSE);
}
if (EEPROMReadInt(PARAMS(deviceIdx, 4)) != FFFF) {
// Parameter 3
printP(clientsel, TXTPAR4);
printP(clientsel, TXTCOLON);
printV(clientsel, EEPROMReadInt(PARAMS(deviceIdx, 4)));
printP(clientsel, AOPEN);
printP(clientsel, BR);
printP(clientsel, SLASH);
printP(clientsel, ACLOSE);
}
if (EEPROMReadInt(PARAMS(deviceIdx, 5)) != FFFF) {
// Parameter 5
printP(clientsel, TXTPAR5);
printP(clientsel, TXTCOLON);
printV(clientsel, EEPROMReadInt(PARAMS(deviceIdx, 5)));
printP(clientsel, AOPEN);
printP(clientsel, BR);
printP(clientsel, SLASH);
printP(clientsel, ACLOSE);
}
// In deviceIdx
if (mdevices[deviceIdx].getInput() != 0) {
printP(clientsel, TXTDEVIND);
printP(clientsel, TXTCOLON);
printV(clientsel, mdevices[deviceIdx].getInput());
printP(clientsel, AOPEN);
printP(clientsel, BR);
printP(clientsel, SLASH);
printP(clientsel, ACLOSE);
}
// Pin
if (mdevices[deviceIdx].getPin() != 0) {
printP(clientsel, TXTPIN);
printP(clientsel, TXTCOLON);
printV(clientsel, mdevices[deviceIdx].getPin());
printP(clientsel, AOPEN);
printP(clientsel, BR);
printP(clientsel, SLASH);
printP(clientsel, ACLOSE);
}
if (DEBUG_WEB) dbg.println();
return;
}
void Device::readInput() {
/*!
* Reads current input value of device
*/
commandValue = 0;
int prevRunning;
switch (type) {
case TYPE_DIGITAL_IO:
case TYPE_DIGITAL_IO_NEG:
status = digitalRead(getPin());
break;
case TYPE_ANALOG_IN:
case TYPE_NTC:
commandValue = analogRead(getPin());
if (type == TYPE_NTC) commandValue = 1024 - commandValue;
if (EEPROMReadInt(PARAMS(deviceIdx, 1)) == FFFF) { // No setpoint set
status = STATUS_UNKNOWN;
sprintf(temp, "{\"V\":\"%i\"}", commandValue);
setExtData(temp);
} else {
if (commandValue > EEPROMReadInt(PARAMS(deviceIdx, 1))) { // Above set point
status = STATUS_ON;
}
if (commandValue <= (EEPROMReadInt(PARAMS(deviceIdx, 1)) - EEPROMReadInt(PARAMS(deviceIdx, 2)))) { // Below set point and threshold
status = STATUS_OFF;
}
sprintf(temp, "{\"V\":\"%i\",\"S\":\"%u\",\"T\":\"%u\"}", commandValue, EEPROMReadInt(PARAMS(deviceIdx, 1)), EEPROMReadInt(PARAMS(deviceIdx, 2)));
setExtData(temp);
checkStatusOrCommandValue();
}
break;
case TYPE_DHT22:
byte chk;
status = STATUS_ERROR;
chk = dht.read(getPin());
switch (chk) {
case DHTLIB_OK:
commandValue = ((int)dht.temperature);
int temp1;
int temp2;
temp1 = abs((dht.temperature - (int)dht.temperature) * 100);
temp2 = (dht.humidity - (int)dht.humidity) * 100;
if (EEPROMReadInt(PARAMS(deviceIdx, 1)) == FFFF) { // No setpoint set
status = STATUS_UNKNOWN;
sprintf(temp, "{\"T\":\"%0d.%d\",\"H\":\"%0d.%d\"}", (int)dht.temperature, temp1, (int)dht.humidity, temp2);
setExtData(temp);
} else {
if (commandValue > EEPROMReadInt(PARAMS(deviceIdx, 1))) { // below set point
status = STATUS_ON;
}
if (commandValue <= (EEPROMReadInt(PARAMS(deviceIdx, 1)) - EEPROMReadInt(PARAMS(deviceIdx, 2)))) { // above set point plus threshold
status = STATUS_OFF;
}
sprintf(temp, "{\"T\":\"%0d.%d\",\"H\":\"%0d.%d\",\"S\":\"%u\"}", (int)dht.temperature, temp1, (int)dht.humidity, temp2, EEPROMReadInt(PARAMS(deviceIdx, 1)));
setExtData(temp);
checkStatusOrCommandValue();
}
break;
default:
status= STATUS_ERROR;
setExtData("");
break;
}
break;
case TYPE_THERMO_HEAT:
case TYPE_THERMO_COOL:
commandValue = readTemp(getInput());
prevRunning = digitalRead(getPin());
if (status) { // Enabled or Not
if (commandValue != ERROR) { // Could not read temp, leave as is
if (getType() == TYPE_THERMO_COOL) {
if (commandValue >= EEPROMReadInt(PARAMS(deviceIdx, 1))) { // Switch on if above set point
digitalWrite(getPin(), HIGH);
}
if (commandValue <= (EEPROMReadInt(PARAMS(deviceIdx, 1)) - EEPROMReadInt(PARAMS(deviceIdx, 2)))) { // Switch off if below threshold
digitalWrite(getPin(), LOW);
}
}
if (getType() == TYPE_THERMO_HEAT) {
if (commandValue <= EEPROMReadInt(PARAMS(deviceIdx, 1))) { // Switch on if below set point
digitalWrite(getPin(), HIGH);
}
if (commandValue >= (EEPROMReadInt(PARAMS(deviceIdx, 1)) + EEPROMReadInt(PARAMS(deviceIdx, 2)))) { // Switch off if above threshold
digitalWrite(getPin(), LOW);
}
}
} // If Error read fall trough
} else {
digitalWrite(mdevices[deviceIdx].getPin(), LOW);
}
sprintf(temp, "{\"V\":\"%i\",\"R\":\"%i\",\"S\":\"%u\",\"T\":\"%u\"}", commandValue, digitalRead(getPin()), EEPROMReadInt(PARAMS(deviceIdx, 1)), EEPROMReadInt(PARAMS(deviceIdx, 2)));
setExtData(temp);
if ((prevRunning != digitalRead(getPin())) || checkCommandValue()) {
int previousCommandID = commandID;
setCommand(COMMAND_SET_RESULT);
postMessage(deviceIdx);
commandID = previousCommandID;
}
break;
case TYPE_AUTO_DOOR:
if (!digitalRead(TOP_SWITCH_PIN)) {
status = STATUS_ON;
} else if (!digitalRead(BOTTOM_SWITCH_PIN)) {
status = STATUS_OFF;
} else {
status = STATUS_UNKNOWN;
}
sprintf(temp, "{\"T\":\"%i\",\"B\":\"%i\",\"P\":\"%i\",\"D\":\"%i\"}", digitalRead(TOP_SWITCH_PIN), digitalRead(BOTTOM_SWITCH_PIN), digitalRead(POWER_RELAY_PIN), digitalRead(DIRECTION_RELAY_PIN));
setExtData(temp);
checkStatus();
break;
case TYPE_ARDUINO:
status = digitalRead(getPin());
sprintf(temp, "{\"R\":\"%i\",\"M\":\"%lu\",\"U\":\"%lu\"}", RELEASE, check_mem(), millis()/1000);
setExtData(temp);
checkStatus();
break;
default:
break;
}
}
void RTC::set(const char* compileTimeStamp) {
int i = 0;
// Serial.println(compileTimeStamp);
/*--------------------DayOfWeek----------------------------*/
char dow[4];
for (i = 0; i < 3; i++)
dow[i] = compileTimeStamp[i];
dow[i] = '\0';
if (strcmp(dow, "Mon") == 0)
_dayOfWeek = 1;
else if (strcmp(dow, "Tue") == 0)
_dayOfWeek = 2;
else if (strcmp(dow, "Wed") == 0)
_dayOfWeek = 3;
else if (strcmp(dow, "Thu") == 0)
_dayOfWeek = 4;
else if (strcmp(dow, "Fri") == 0)
_dayOfWeek = 5;
else if (strcmp(dow, "Sat") == 0)
_dayOfWeek = 6;
else if (strcmp(dow, "Sun") == 0)
_dayOfWeek = 7;
/*--------------------------Day----------------------------*/
_day = ((compileTimeStamp[8] - '0') * 10 + (compileTimeStamp[9] - '0'));
/*--------------------------Month---------------------------*/
char month[4];
for (i = 0; i < 3; i++)
month[i] = compileTimeStamp[i+4];
month[i] = '\0';
if (strcmp(month, "Jan") == 0)
_month = 1;
else if (strcmp(month, "Feb") == 0)
_month = 2;
else if (strcmp(month, "Mar") == 0)
_month = 3;
else if (strcmp(month, "Apr") == 0)
_month = 4;
else if (strcmp(month, "May") == 0)
_month = 5;
else if (strcmp(month, "Jun") == 0)
_month = 6;
else if (strcmp(month, "Jul") == 0)
_month = 7;
else if (strcmp(month, "Aug") == 0)
_month = 8;
else if (strcmp(month, "Sep") == 0)
_month = 9;
else if (strcmp(month, "Oct") == 0)
_month = 10;
else if (strcmp(month, "Nov") == 0)
_month = 11;
else if (strcmp(month, "Dec") == 0)
_month = 12;
/*--------------------------Year----------------------------*/
_year = ((compileTimeStamp[20] - '0') * 1000
+ (compileTimeStamp[21] - '0') * 100
+ (compileTimeStamp[22] - '0') * 10
+ (compileTimeStamp[23] - '0')) - 2000;
/*--------------------------Time----------------------------*/
_hour = ((compileTimeStamp[11] - '0') * 10
+ (compileTimeStamp[12] - '0'));
_minute = ((compileTimeStamp[14] - '0') * 10
+ (compileTimeStamp[15] - '0'));
_second = ((compileTimeStamp[17] - '0') * 10
+ (compileTimeStamp[18] - '0'));
unsigned int hash = _hour * 60 * 60 + _minute * 60 + _second;
if (EEPROMReadInt(0) != hash) {
EEPROMWriteInt(0, hash);
Wire.beginTransmission(DS1307_I2C_ADDRESS);
Wire.write((uint8_t)0x00);
// 0 to bit 7 starts the clock
Wire.write(decToBcd(_second));
Wire.write(decToBcd(_minute));
// If you want 12 hour am/pm you need to set bit 6
Wire.write(decToBcd(_hour));
Wire.write(decToBcd(_dayOfWeek));
Wire.write(decToBcd(_day));
Wire.write(decToBcd(_month));
Wire.write(decToBcd(_year));
Wire.endTransmission();
}
}
