static __checkReturn efx_rc_t
siena_intr_trigger(
__in efx_nic_t *enp,
__in unsigned int level)
{
efx_intr_t *eip = &(enp->en_intr);
efx_oword_t oword;
unsigned int count;
uint32_t sel;
efx_rc_t rc;
/* bug16757: No event queues can be initialized */
EFSYS_ASSERT(!(enp->en_mod_flags & EFX_MOD_EV));
if (level >= EFX_NINTR_SIENA) {
rc = EINVAL;
goto fail1;
}
if (level > EFX_MASK32(FRF_AZ_KER_INT_LEVE_SEL))
return (ENOTSUP); /* avoid EFSYS_PROBE() */
sel = level;
/* Trigger a test interrupt */
EFX_BAR_READO(enp, FR_AZ_INT_EN_REG_KER, &oword);
EFX_SET_OWORD_FIELD(oword, FRF_AZ_KER_INT_LEVE_SEL, sel);
EFX_SET_OWORD_FIELD(oword, FRF_AZ_KER_INT_KER, 1);
EFX_BAR_WRITEO(enp, FR_AZ_INT_EN_REG_KER, &oword);
/*
* Wait up to 100ms for the interrupt to be raised before restoring
* KER_INT_LEVE_SEL. Ignore a failure to raise (the caller will
* observe this soon enough anyway), but always reset KER_INT_LEVE_SEL
*/
count = 0;
do {
EFSYS_SPIN(100); /* 100us */
EFX_BAR_READO(enp, FR_AZ_INT_EN_REG_KER, &oword);
} while (EFX_OWORD_FIELD(oword, FRF_AZ_KER_INT_KER) && ++count < 1000);
EFX_SET_OWORD_FIELD(oword, FRF_AZ_KER_INT_LEVE_SEL, eip->ei_level);
EFX_BAR_WRITEO(enp, FR_AZ_INT_EN_REG_KER, &oword);
return (0);
fail1:
EFSYS_PROBE1(fail1, efx_rc_t, rc);
return (rc);
}
void
efx_mcdi_request_start(
__in efx_nic_t *enp,
__in efx_mcdi_req_t *emrp,
__in boolean_t ev_cpl)
{
efx_mcdi_iface_t *emip = &(enp->en_mcdi.em_emip);
unsigned int seq;
boolean_t new_epoch;
int state;
EFSYS_ASSERT3U(enp->en_magic, ==, EFX_NIC_MAGIC);
EFSYS_ASSERT3U(enp->en_mod_flags, &, EFX_MOD_MCDI);
EFSYS_ASSERT3U(enp->en_features, &, EFX_FEATURE_MCDI);
/*
* efx_mcdi_request_start() is naturally serialised against both
* efx_mcdi_request_poll() and efx_mcdi_ev_cpl()/efx_mcdi_ev_death(),
* by virtue of there only being one outstanding MCDI request.
* Unfortunately, upper layers may also call efx_mcdi_request_abort()
* at any time, to timeout a pending mcdi request, That request may
* then subsequently complete, meaning efx_mcdi_ev_cpl() or
* efx_mcdi_ev_death() may end up running in parallel with
* efx_mcdi_request_start(). This race is handled by ensuring that
* %emi_pending_req, %emi_ev_cpl and %emi_seq are protected by the
* en_eslp lock.
*/
EFSYS_LOCK(enp->en_eslp, state);
EFSYS_ASSERT(emip->emi_pending_req == NULL);
emip->emi_pending_req = emrp;
emip->emi_ev_cpl = ev_cpl;
emip->emi_poll_cnt = 0;
seq = emip->emi_seq++ & EFX_MASK32(MCDI_HEADER_SEQ);
new_epoch = emip->emi_new_epoch;
EFSYS_UNLOCK(enp->en_eslp, state);
efx_mcdi_request_copyin(enp, emrp, seq, ev_cpl, new_epoch);
}
void
efx_mcdi_read_response_header(
__in efx_nic_t *enp,
__inout efx_mcdi_req_t *emrp)
{
#if EFSYS_OPT_MCDI_LOGGING
const efx_mcdi_transport_t *emtp = enp->en_mcdi.em_emtp;
#endif /* EFSYS_OPT_MCDI_LOGGING */
efx_mcdi_iface_t *emip = &(enp->en_mcdi.em_emip);
efx_dword_t hdr[2];
unsigned int hdr_len;
unsigned int data_len;
unsigned int seq;
unsigned int cmd;
unsigned int error;
efx_rc_t rc;
EFSYS_ASSERT(emrp != NULL);
efx_mcdi_read_response(enp, &hdr[0], 0, sizeof (hdr[0]));
hdr_len = sizeof (hdr[0]);
cmd = EFX_DWORD_FIELD(hdr[0], MCDI_HEADER_CODE);
seq = EFX_DWORD_FIELD(hdr[0], MCDI_HEADER_SEQ);
error = EFX_DWORD_FIELD(hdr[0], MCDI_HEADER_ERROR);
if (cmd != MC_CMD_V2_EXTN) {
data_len = EFX_DWORD_FIELD(hdr[0], MCDI_HEADER_DATALEN);
} else {
efx_mcdi_read_response(enp, &hdr[1], hdr_len, sizeof (hdr[1]));
hdr_len += sizeof (hdr[1]);
cmd = EFX_DWORD_FIELD(hdr[1], MC_CMD_V2_EXTN_IN_EXTENDED_CMD);
data_len =
EFX_DWORD_FIELD(hdr[1], MC_CMD_V2_EXTN_IN_ACTUAL_LEN);
}
if (error && (data_len == 0)) {
/* The MC has rebooted since the request was sent. */
EFSYS_SPIN(EFX_MCDI_STATUS_SLEEP_US);
efx_mcdi_poll_reboot(enp);
rc = EIO;
goto fail1;
}
if ((cmd != emrp->emr_cmd) ||
(seq != ((emip->emi_seq - 1) & EFX_MASK32(MCDI_HEADER_SEQ)))) {
/* Response is for a different request */
rc = EIO;
goto fail2;
}
if (error) {
efx_dword_t err[2];
unsigned int err_len = MIN(data_len, sizeof (err));
int err_code = MC_CMD_ERR_EPROTO;
int err_arg = 0;
/* Read error code (and arg num for MCDI v2 commands) */
efx_mcdi_read_response(enp, &err, hdr_len, err_len);
if (err_len >= (MC_CMD_ERR_CODE_OFST + sizeof (efx_dword_t)))
err_code = EFX_DWORD_FIELD(err[0], EFX_DWORD_0);
#ifdef WITH_MCDI_V2
if (err_len >= (MC_CMD_ERR_ARG_OFST + sizeof (efx_dword_t)))
err_arg = EFX_DWORD_FIELD(err[1], EFX_DWORD_0);
#endif
emrp->emr_err_code = err_code;
emrp->emr_err_arg = err_arg;
#if EFSYS_OPT_MCDI_PROXY_AUTH
if ((err_code == MC_CMD_ERR_PROXY_PENDING) &&
(err_len == sizeof (err))) {
/*
* The MCDI request would normally fail with EPERM, but
* firmware has forwarded it to an authorization agent
* attached to a privileged PF.
*
* Save the authorization request handle. The client
* must wait for a PROXY_RESPONSE event, or timeout.
*/
emrp->emr_proxy_handle = err_arg;
}
#endif /* EFSYS_OPT_MCDI_PROXY_AUTH */
#if EFSYS_OPT_MCDI_LOGGING
if (emtp->emt_logger != NULL) {
emtp->emt_logger(emtp->emt_context,
EFX_LOG_MCDI_RESPONSE,
&hdr, hdr_len,
&err, err_len);
}
#endif /* EFSYS_OPT_MCDI_LOGGING */
if (!emrp->emr_quiet) {
EFSYS_PROBE3(mcdi_err_arg, int, emrp->emr_cmd,
int, err_code, int, err_arg);
}
rc = efx_mcdi_request_errcode(err_code);
goto fail3;
}
static __checkReturn efx_rc_t
siena_board_cfg(
__in efx_nic_t *enp)
{
efx_nic_cfg_t *encp = &(enp->en_nic_cfg);
uint8_t mac_addr[6];
efx_dword_t capabilities;
uint32_t board_type;
uint32_t nevq, nrxq, ntxq;
efx_rc_t rc;
/* External port identifier using one-based port numbering */
encp->enc_external_port = (uint8_t)enp->en_mcdi.em_emip.emi_port;
/* Board configuration */
if ((rc = efx_mcdi_get_board_cfg(enp, &board_type,
&capabilities, mac_addr)) != 0)
goto fail1;
EFX_MAC_ADDR_COPY(encp->enc_mac_addr, mac_addr);
encp->enc_board_type = board_type;
/*
* There is no possibility to determine the number of PFs on Siena
* by issuing MCDI request, and it is not an easy task to find the
* value based on the board type, so 'enc_hw_pf_count' is set to 1
*/
encp->enc_hw_pf_count = 1;
/* Additional capabilities */
encp->enc_clk_mult = 1;
if (EFX_DWORD_FIELD(capabilities, MC_CMD_CAPABILITIES_TURBO)) {
enp->en_features |= EFX_FEATURE_TURBO;
if (EFX_DWORD_FIELD(capabilities,
MC_CMD_CAPABILITIES_TURBO_ACTIVE)) {
encp->enc_clk_mult = 2;
}
}
encp->enc_evq_timer_quantum_ns =
EFX_EVQ_SIENA_TIMER_QUANTUM_NS / encp->enc_clk_mult;
encp->enc_evq_timer_max_us = (encp->enc_evq_timer_quantum_ns <<
FRF_CZ_TC_TIMER_VAL_WIDTH) / 1000;
/* When hash header insertion is enabled, Siena inserts 16 bytes */
encp->enc_rx_prefix_size = 16;
/* Alignment for receive packet DMA buffers */
encp->enc_rx_buf_align_start = 1;
encp->enc_rx_buf_align_end = 1;
/* Alignment for WPTR updates */
encp->enc_rx_push_align = 1;
encp->enc_tx_dma_desc_size_max = EFX_MASK32(FSF_AZ_TX_KER_BYTE_COUNT);
/* Fragments must not span 4k boundaries. */
encp->enc_tx_dma_desc_boundary = 4096;
/* Resource limits */
rc = efx_mcdi_get_resource_limits(enp, &nevq, &nrxq, &ntxq);
if (rc != 0) {
if (rc != ENOTSUP)
goto fail2;
nevq = 1024;
nrxq = EFX_RXQ_LIMIT_TARGET;
ntxq = EFX_TXQ_LIMIT_TARGET;
}
encp->enc_evq_limit = nevq;
encp->enc_rxq_limit = MIN(EFX_RXQ_LIMIT_TARGET, nrxq);
encp->enc_txq_limit = MIN(EFX_TXQ_LIMIT_TARGET, ntxq);
encp->enc_buftbl_limit = SIENA_SRAM_ROWS -
(encp->enc_txq_limit * EFX_TXQ_DC_NDESCS(EFX_TXQ_DC_SIZE)) -
(encp->enc_rxq_limit * EFX_RXQ_DC_NDESCS(EFX_RXQ_DC_SIZE));
encp->enc_hw_tx_insert_vlan_enabled = B_FALSE;
encp->enc_fw_assisted_tso_enabled = B_FALSE;
encp->enc_fw_assisted_tso_v2_enabled = B_FALSE;
encp->enc_fw_assisted_tso_v2_n_contexts = 0;
encp->enc_allow_set_mac_with_installed_filters = B_TRUE;
/* Siena supports two 10G ports, and 8 lanes of PCIe Gen2 */
encp->enc_required_pcie_bandwidth_mbps = 2 * 10000;
encp->enc_max_pcie_link_gen = EFX_PCIE_LINK_SPEED_GEN2;
encp->enc_fw_verified_nvram_update_required = B_FALSE;
return (0);
fail2:
EFSYS_PROBE(fail2);
fail1:
EFSYS_PROBE1(fail1, efx_rc_t, rc);
return (rc);
}
__checkReturn efx_rc_t
medford_board_cfg(
__in efx_nic_t *enp)
{
efx_mcdi_iface_t *emip = &(enp->en_mcdi.em_emip);
efx_nic_cfg_t *encp = &(enp->en_nic_cfg);
uint8_t mac_addr[6] = { 0 };
uint32_t board_type = 0;
ef10_link_state_t els;
efx_port_t *epp = &(enp->en_port);
uint32_t port;
uint32_t pf;
uint32_t vf;
uint32_t mask;
uint32_t sysclk, dpcpu_clk;
uint32_t base, nvec;
uint32_t end_padding;
uint32_t bandwidth;
efx_rc_t rc;
/*
* FIXME: Likely to be incomplete and incorrect.
* Parts of this should be shared with Huntington.
*/
if ((rc = efx_mcdi_get_port_assignment(enp, &port)) != 0)
goto fail1;
/*
* NOTE: The MCDI protocol numbers ports from zero.
* The common code MCDI interface numbers ports from one.
*/
emip->emi_port = port + 1;
if ((rc = ef10_external_port_mapping(enp, port,
&encp->enc_external_port)) != 0)
goto fail2;
/*
* Get PCIe function number from firmware (used for
* per-function privilege and dynamic config info).
* - PCIe PF: pf = PF number, vf = 0xffff.
* - PCIe VF: pf = parent PF, vf = VF number.
*/
if ((rc = efx_mcdi_get_function_info(enp, &pf, &vf)) != 0)
goto fail3;
encp->enc_pf = pf;
encp->enc_vf = vf;
/* MAC address for this function */
if (EFX_PCI_FUNCTION_IS_PF(encp)) {
rc = efx_mcdi_get_mac_address_pf(enp, mac_addr);
#if EFSYS_OPT_ALLOW_UNCONFIGURED_NIC
/* Disable static config checking for Medford NICs, ONLY
* for manufacturing test and setup at the factory, to
* allow the static config to be installed.
*/
#else /* EFSYS_OPT_ALLOW_UNCONFIGURED_NIC */
if ((rc == 0) && (mac_addr[0] & 0x02)) {
/*
* If the static config does not include a global MAC
* address pool then the board may return a locally
* administered MAC address (this should only happen on
* incorrectly programmed boards).
*/
rc = EINVAL;
}
#endif /* EFSYS_OPT_ALLOW_UNCONFIGURED_NIC */
} else {
rc = efx_mcdi_get_mac_address_vf(enp, mac_addr);
}
if (rc != 0)
goto fail4;
EFX_MAC_ADDR_COPY(encp->enc_mac_addr, mac_addr);
/* Board configuration */
rc = efx_mcdi_get_board_cfg(enp, &board_type, NULL, NULL);
if (rc != 0) {
/* Unprivileged functions may not be able to read board cfg */
if (rc == EACCES)
board_type = 0;
else
goto fail5;
}
encp->enc_board_type = board_type;
encp->enc_clk_mult = 1; /* not used for Medford */
/* Fill out fields in enp->en_port and enp->en_nic_cfg from MCDI */
if ((rc = efx_mcdi_get_phy_cfg(enp)) != 0)
goto fail6;
/* Obtain the default PHY advertised capabilities */
if ((rc = ef10_phy_get_link(enp, &els)) != 0)
goto fail7;
epp->ep_default_adv_cap_mask = els.els_adv_cap_mask;
epp->ep_adv_cap_mask = els.els_adv_cap_mask;
/*
* Enable firmware workarounds for hardware errata.
* Expected responses are:
* - 0 (zero):
* Success: workaround enabled or disabled as requested.
* - MC_CMD_ERR_ENOSYS (reported as ENOTSUP):
* Firmware does not support the MC_CMD_WORKAROUND request.
* (assume that the workaround is not supported).
* - MC_CMD_ERR_ENOENT (reported as ENOENT):
* Firmware does not support the requested workaround.
* - MC_CMD_ERR_EPERM (reported as EACCES):
* Unprivileged function cannot enable/disable workarounds.
*
* See efx_mcdi_request_errcode() for MCDI error translations.
*/
if (EFX_PCI_FUNCTION_IS_VF(encp)) {
/*
* Interrupt testing does not work for VFs. See bug50084.
* FIXME: Does this still apply to Medford?
*/
encp->enc_bug41750_workaround = B_TRUE;
}
/* Chained multicast is always enabled on Medford */
encp->enc_bug26807_workaround = B_TRUE;
/*
* If the bug61265 workaround is enabled, then interrupt holdoff timers
* cannot be controlled by timer table writes, so MCDI must be used
* (timer table writes can still be used for wakeup timers).
*/
rc = efx_mcdi_set_workaround(enp, MC_CMD_WORKAROUND_BUG61265, B_TRUE,
NULL);
if ((rc == 0) || (rc == EACCES))
encp->enc_bug61265_workaround = B_TRUE;
else if ((rc == ENOTSUP) || (rc == ENOENT))
encp->enc_bug61265_workaround = B_FALSE;
else
goto fail8;
/* Get clock frequencies (in MHz). */
if ((rc = efx_mcdi_get_clock(enp, &sysclk, &dpcpu_clk)) != 0)
goto fail9;
/*
* The Medford timer quantum is 1536 dpcpu_clk cycles, documented for
* the EV_TMR_VAL field of EV_TIMER_TBL. Scale for MHz and ns units.
*/
encp->enc_evq_timer_quantum_ns = 1536000UL / dpcpu_clk; /* 1536 cycles */
encp->enc_evq_timer_max_us = (encp->enc_evq_timer_quantum_ns <<
FRF_CZ_TC_TIMER_VAL_WIDTH) / 1000;
/* Check capabilities of running datapath firmware */
if ((rc = ef10_get_datapath_caps(enp)) != 0)
goto fail10;
/* Alignment for receive packet DMA buffers */
encp->enc_rx_buf_align_start = 1;
/* Get the RX DMA end padding alignment configuration */
if ((rc = efx_mcdi_get_rxdp_config(enp, &end_padding)) != 0) {
if (rc != EACCES)
goto fail11;
/* Assume largest tail padding size supported by hardware */
end_padding = 256;
}
encp->enc_rx_buf_align_end = end_padding;
/* Alignment for WPTR updates */
encp->enc_rx_push_align = EF10_RX_WPTR_ALIGN;
encp->enc_tx_dma_desc_size_max = EFX_MASK32(ESF_DZ_RX_KER_BYTE_CNT);
/* No boundary crossing limits */
encp->enc_tx_dma_desc_boundary = 0;
/*
* Set resource limits for MC_CMD_ALLOC_VIS. Note that we cannot use
* MC_CMD_GET_RESOURCE_LIMITS here as that reports the available
* resources (allocated to this PCIe function), which is zero until
* after we have allocated VIs.
*/
encp->enc_evq_limit = 1024;
encp->enc_rxq_limit = EFX_RXQ_LIMIT_TARGET;
encp->enc_txq_limit = EFX_TXQ_LIMIT_TARGET;
encp->enc_buftbl_limit = 0xFFFFFFFF;
encp->enc_piobuf_limit = MEDFORD_PIOBUF_NBUFS;
encp->enc_piobuf_size = MEDFORD_PIOBUF_SIZE;
encp->enc_piobuf_min_alloc_size = MEDFORD_MIN_PIO_ALLOC_SIZE;
/*
* Get the current privilege mask. Note that this may be modified
* dynamically, so this value is informational only. DO NOT use
* the privilege mask to check for sufficient privileges, as that
* can result in time-of-check/time-of-use bugs.
*/
if ((rc = ef10_get_privilege_mask(enp, &mask)) != 0)
goto fail12;
encp->enc_privilege_mask = mask;
/* Get interrupt vector limits */
if ((rc = efx_mcdi_get_vector_cfg(enp, &base, &nvec, NULL)) != 0) {
if (EFX_PCI_FUNCTION_IS_PF(encp))
goto fail13;
/* Ignore error (cannot query vector limits from a VF). */
base = 0;
nvec = 1024;
}
encp->enc_intr_vec_base = base;
encp->enc_intr_limit = nvec;
/*
* Maximum number of bytes into the frame the TCP header can start for
* firmware assisted TSO to work.
*/
encp->enc_tx_tso_tcp_header_offset_limit = EF10_TCP_HEADER_OFFSET_LIMIT;
/*
* Medford stores a single global copy of VPD, not per-PF as on
* Huntington.
*/
encp->enc_vpd_is_global = B_TRUE;
rc = medford_nic_get_required_pcie_bandwidth(enp, &bandwidth);
if (rc != 0)
goto fail14;
encp->enc_required_pcie_bandwidth_mbps = bandwidth;
encp->enc_max_pcie_link_gen = EFX_PCIE_LINK_SPEED_GEN3;
return (0);
fail14:
EFSYS_PROBE(fail14);
fail13:
EFSYS_PROBE(fail13);
fail12:
EFSYS_PROBE(fail12);
fail11:
EFSYS_PROBE(fail11);
fail10:
EFSYS_PROBE(fail10);
fail9:
EFSYS_PROBE(fail9);
fail8:
EFSYS_PROBE(fail8);
fail7:
EFSYS_PROBE(fail7);
fail6:
EFSYS_PROBE(fail6);
fail5:
EFSYS_PROBE(fail5);
fail4:
EFSYS_PROBE(fail4);
fail3:
EFSYS_PROBE(fail3);
fail2:
EFSYS_PROBE(fail2);
fail1:
EFSYS_PROBE1(fail1, efx_rc_t, rc);
return (rc);
}
__checkReturn efx_rc_t
hunt_board_cfg(
__in efx_nic_t *enp)
{
efx_mcdi_iface_t *emip = &(enp->en_mcdi.em_emip);
efx_nic_cfg_t *encp = &(enp->en_nic_cfg);
uint8_t mac_addr[6];
uint32_t board_type = 0;
ef10_link_state_t els;
efx_port_t *epp = &(enp->en_port);
uint32_t port;
uint32_t pf;
uint32_t vf;
uint32_t mask;
uint32_t flags;
uint32_t sysclk, dpcpu_clk;
uint32_t base, nvec;
uint32_t bandwidth;
efx_rc_t rc;
if ((rc = efx_mcdi_get_port_assignment(enp, &port)) != 0)
goto fail1;
/*
* NOTE: The MCDI protocol numbers ports from zero.
* The common code MCDI interface numbers ports from one.
*/
emip->emi_port = port + 1;
if ((rc = ef10_external_port_mapping(enp, port,
&encp->enc_external_port)) != 0)
goto fail2;
/*
* Get PCIe function number from firmware (used for
* per-function privilege and dynamic config info).
* - PCIe PF: pf = PF number, vf = 0xffff.
* - PCIe VF: pf = parent PF, vf = VF number.
*/
if ((rc = efx_mcdi_get_function_info(enp, &pf, &vf)) != 0)
goto fail3;
encp->enc_pf = pf;
encp->enc_vf = vf;
/* MAC address for this function */
if (EFX_PCI_FUNCTION_IS_PF(encp)) {
rc = efx_mcdi_get_mac_address_pf(enp, mac_addr);
if ((rc == 0) && (mac_addr[0] & 0x02)) {
/*
* If the static config does not include a global MAC
* address pool then the board may return a locally
* administered MAC address (this should only happen on
* incorrectly programmed boards).
*/
rc = EINVAL;
}
} else {
rc = efx_mcdi_get_mac_address_vf(enp, mac_addr);
}
if (rc != 0)
goto fail4;
EFX_MAC_ADDR_COPY(encp->enc_mac_addr, mac_addr);
/* Board configuration */
rc = efx_mcdi_get_board_cfg(enp, &board_type, NULL, NULL);
if (rc != 0) {
/* Unprivileged functions may not be able to read board cfg */
if (rc == EACCES)
board_type = 0;
else
goto fail5;
}
encp->enc_board_type = board_type;
encp->enc_clk_mult = 1; /* not used for Huntington */
/* Fill out fields in enp->en_port and enp->en_nic_cfg from MCDI */
if ((rc = efx_mcdi_get_phy_cfg(enp)) != 0)
goto fail6;
/* Obtain the default PHY advertised capabilities */
if ((rc = ef10_phy_get_link(enp, &els)) != 0)
goto fail7;
epp->ep_default_adv_cap_mask = els.els_adv_cap_mask;
epp->ep_adv_cap_mask = els.els_adv_cap_mask;
/*
* Enable firmware workarounds for hardware errata.
* Expected responses are:
* - 0 (zero):
* Success: workaround enabled or disabled as requested.
* - MC_CMD_ERR_ENOSYS (reported as ENOTSUP):
* Firmware does not support the MC_CMD_WORKAROUND request.
* (assume that the workaround is not supported).
* - MC_CMD_ERR_ENOENT (reported as ENOENT):
* Firmware does not support the requested workaround.
* - MC_CMD_ERR_EPERM (reported as EACCES):
* Unprivileged function cannot enable/disable workarounds.
*
* See efx_mcdi_request_errcode() for MCDI error translations.
*/
/*
* If the bug35388 workaround is enabled, then use an indirect access
* method to avoid unsafe EVQ writes.
*/
rc = efx_mcdi_set_workaround(enp, MC_CMD_WORKAROUND_BUG35388, B_TRUE,
NULL);
if ((rc == 0) || (rc == EACCES))
encp->enc_bug35388_workaround = B_TRUE;
else if ((rc == ENOTSUP) || (rc == ENOENT))
encp->enc_bug35388_workaround = B_FALSE;
else
goto fail8;
/*
* If the bug41750 workaround is enabled, then do not test interrupts,
* as the test will fail (seen with Greenport controllers).
*/
rc = efx_mcdi_set_workaround(enp, MC_CMD_WORKAROUND_BUG41750, B_TRUE,
NULL);
if (rc == 0) {
encp->enc_bug41750_workaround = B_TRUE;
} else if (rc == EACCES) {
/* Assume a controller with 40G ports needs the workaround. */
if (epp->ep_default_adv_cap_mask & EFX_PHY_CAP_40000FDX)
encp->enc_bug41750_workaround = B_TRUE;
else
encp->enc_bug41750_workaround = B_FALSE;
} else if ((rc == ENOTSUP) || (rc == ENOENT)) {
encp->enc_bug41750_workaround = B_FALSE;
} else {
goto fail9;
}
if (EFX_PCI_FUNCTION_IS_VF(encp)) {
/* Interrupt testing does not work for VFs. See bug50084. */
encp->enc_bug41750_workaround = B_TRUE;
}
/*
* If the bug26807 workaround is enabled, then firmware has enabled
* support for chained multicast filters. Firmware will reset (FLR)
* functions which have filters in the hardware filter table when the
* workaround is enabled/disabled.
*
* We must recheck if the workaround is enabled after inserting the
* first hardware filter, in case it has been changed since this check.
*/
rc = efx_mcdi_set_workaround(enp, MC_CMD_WORKAROUND_BUG26807,
B_TRUE, &flags);
if (rc == 0) {
encp->enc_bug26807_workaround = B_TRUE;
if (flags & (1 << MC_CMD_WORKAROUND_EXT_OUT_FLR_DONE_LBN)) {
/*
* Other functions had installed filters before the
* workaround was enabled, and they have been reset
* by firmware.
*/
EFSYS_PROBE(bug26807_workaround_flr_done);
/* FIXME: bump MC warm boot count ? */
}
} else if (rc == EACCES) {
/*
* Unprivileged functions cannot enable the workaround in older
* firmware.
*/
encp->enc_bug26807_workaround = B_FALSE;
} else if ((rc == ENOTSUP) || (rc == ENOENT)) {
encp->enc_bug26807_workaround = B_FALSE;
} else {
goto fail10;
}
/* Get clock frequencies (in MHz). */
if ((rc = efx_mcdi_get_clock(enp, &sysclk, &dpcpu_clk)) != 0)
goto fail11;
/*
* The Huntington timer quantum is 1536 sysclk cycles, documented for
* the EV_TMR_VAL field of EV_TIMER_TBL. Scale for MHz and ns units.
*/
encp->enc_evq_timer_quantum_ns = 1536000UL / sysclk; /* 1536 cycles */
if (encp->enc_bug35388_workaround) {
encp->enc_evq_timer_max_us = (encp->enc_evq_timer_quantum_ns <<
ERF_DD_EVQ_IND_TIMER_VAL_WIDTH) / 1000;
} else {
encp->enc_evq_timer_max_us = (encp->enc_evq_timer_quantum_ns <<
FRF_CZ_TC_TIMER_VAL_WIDTH) / 1000;
}
encp->enc_bug61265_workaround = B_FALSE; /* Medford only */
/* Check capabilities of running datapath firmware */
if ((rc = ef10_get_datapath_caps(enp)) != 0)
goto fail12;
/* Alignment for receive packet DMA buffers */
encp->enc_rx_buf_align_start = 1;
encp->enc_rx_buf_align_end = 64; /* RX DMA end padding */
/* Alignment for WPTR updates */
encp->enc_rx_push_align = EF10_RX_WPTR_ALIGN;
encp->enc_tx_dma_desc_size_max = EFX_MASK32(ESF_DZ_RX_KER_BYTE_CNT);
/* No boundary crossing limits */
encp->enc_tx_dma_desc_boundary = 0;
/*
* Set resource limits for MC_CMD_ALLOC_VIS. Note that we cannot use
* MC_CMD_GET_RESOURCE_LIMITS here as that reports the available
* resources (allocated to this PCIe function), which is zero until
* after we have allocated VIs.
*/
encp->enc_evq_limit = 1024;
encp->enc_rxq_limit = EFX_RXQ_LIMIT_TARGET;
encp->enc_txq_limit = EFX_TXQ_LIMIT_TARGET;
encp->enc_buftbl_limit = 0xFFFFFFFF;
encp->enc_piobuf_limit = HUNT_PIOBUF_NBUFS;
encp->enc_piobuf_size = HUNT_PIOBUF_SIZE;
encp->enc_piobuf_min_alloc_size = HUNT_MIN_PIO_ALLOC_SIZE;
/*
* Get the current privilege mask. Note that this may be modified
* dynamically, so this value is informational only. DO NOT use
* the privilege mask to check for sufficient privileges, as that
* can result in time-of-check/time-of-use bugs.
*/
if ((rc = ef10_get_privilege_mask(enp, &mask)) != 0)
goto fail13;
encp->enc_privilege_mask = mask;
/* Get interrupt vector limits */
if ((rc = efx_mcdi_get_vector_cfg(enp, &base, &nvec, NULL)) != 0) {
if (EFX_PCI_FUNCTION_IS_PF(encp))
goto fail14;
/* Ignore error (cannot query vector limits from a VF). */
base = 0;
nvec = 1024;
}
encp->enc_intr_vec_base = base;
encp->enc_intr_limit = nvec;
/*
* Maximum number of bytes into the frame the TCP header can start for
* firmware assisted TSO to work.
*/
encp->enc_tx_tso_tcp_header_offset_limit = EF10_TCP_HEADER_OFFSET_LIMIT;
if ((rc = hunt_nic_get_required_pcie_bandwidth(enp, &bandwidth)) != 0)
goto fail15;
encp->enc_required_pcie_bandwidth_mbps = bandwidth;
/* All Huntington devices have a PCIe Gen3, 8 lane connector */
encp->enc_max_pcie_link_gen = EFX_PCIE_LINK_SPEED_GEN3;
return (0);
fail15:
EFSYS_PROBE(fail15);
fail14:
EFSYS_PROBE(fail14);
fail13:
EFSYS_PROBE(fail13);
fail12:
EFSYS_PROBE(fail12);
fail11:
EFSYS_PROBE(fail11);
fail10:
EFSYS_PROBE(fail10);
fail9:
EFSYS_PROBE(fail9);
fail8:
EFSYS_PROBE(fail8);
fail7:
EFSYS_PROBE(fail7);
fail6:
EFSYS_PROBE(fail6);
fail5:
EFSYS_PROBE(fail5);
fail4:
EFSYS_PROBE(fail4);
fail3:
EFSYS_PROBE(fail3);
fail2:
EFSYS_PROBE(fail2);
fail1:
EFSYS_PROBE1(fail1, efx_rc_t, rc);
return (rc);
}