C++ (Cpp) EXT_MODE_EXTI Beispiele

Beispiel #1

Datei: main.c Projekt: Ozhvankov/STM32-GPS-Tracker

   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL}
  },
  EXT_MODE_EXTI(EXT_MODE_GPIOA, /* Button.*/
                0, 0, 0, 0, 0, 0, 0, 0,
                0, 0, 0, 0, 0, 0, 0)
};

/*
 * Application entry point.
 */
int main(void) {

  /*
   * System initializations.
   * - HAL initialization, this also initializes the configured device drivers
   *   and performs the board-specific initializations.
   * - Kernel initialization, the main() function becomes a thread and the
   *   RTOS is active.
   */

Beispiel #2

Datei: main.c Projekt: EmbeddedFiedel/Carrera_F407_Controlunit

   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_RISING_EDGE | EXT_CH_MODE_AUTOSTART, extcb2},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
  },
  EXT_MODE_EXTI(EXT_MODE_GPIOA,
                0,
                0,
                0,
                0,
                0,
                0,
                0,
                0,
                0,
                0,
                0,
                EXT_MODE_GPIOC,
                0,
                0,
                0)
};

/*
 * Application entry point.
 */
int main(void) {

  /*

Beispiel #3

Datei: main.c Projekt: Ankhbayar/mlab-chibios

   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART, extcb},/* 16 - PVD */
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
   {EXT_CH_MODE_DISABLED, NULL},
  },
  EXT_MODE_EXTI(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)
};

/*
 * Application entry point.
 */
int main(void) {

  /*
   * System initializations.
   * - HAL initialization, this also initializes the configured device drivers
   *   and performs the board-specific initializations.
   * - Kernel initialization, the main() function becomes a thread and the
   *   RTOS is active.
   */
  halInit();

Beispiel #4

Datei: ExternalInterrupt.cpp Projekt: EmbeddedFiedel/Carrera_F407_Controlunit

		{EXT_CH_MODE_DISABLED, NULL},
		{EXT_CH_MODE_RISING_EDGE | EXT_CH_MODE_AUTOSTART, rx_channel1_interrupt},
		{EXT_CH_MODE_DISABLED, NULL},
		{EXT_CH_MODE_RISING_EDGE | EXT_CH_MODE_AUTOSTART, rx_channel2_interrupt},
		{EXT_CH_MODE_DISABLED, NULL},
		{EXT_CH_MODE_DISABLED, NULL},
		{EXT_CH_MODE_DISABLED, NULL},
	},
	EXT_MODE_EXTI(EXT_MODE_GPIOA, 				/* 0 */						//JR
	              0, 				/* 1 */
	              0,			 	/* 2 */
	              0, 				/* 3 */
	              0, 				/* 4 */
	              0, 				/* 5 */
	              0, 				/* 6 */
	              0, 				/* 7 */
	              0, 				/* 8 */
	              0, 				/* 9 */
	              EXT_MODE_GPIOE, 			/* 10 */
	              EXT_MODE_GPIOE, 			/* 11 */
	              EXT_MODE_GPIOE, 			/* 12 */
	              EXT_MODE_GPIOE, 			/* 13 */
	              0, 				/* 14 */
	              0) 				/* 15 */
};



void setup_ExternalInterrupt()
{
	extStart(&EXTD1, &extcfg); 
}