HRESULT CbDevice::SetClockSource()
{
if (_UseSoftwareClock)
{
return EnableSwClocking();
}
else
{
RETURN_HRESULT(_DaqHwInfo->put_MemberValue(L"minsamplerate", CComVariant(_minSampleRate)));
RETURN_HRESULT(_DaqHwInfo->put_MemberValue(L"maxsamplerate", CComVariant(_maxSampleRate)));
pSampleRate.SetRange(_minSampleRate,_maxSampleRate);
UpdateRateAndSkew();
}
return S_OK;
}
////////////////////////////////////////
// SetProperty()
//
// Called when a property is changed from the MATLAB environment.
// It gives us a chance to update other properties, do error checking, etc.
// /////////////////////////////////////
STDMETHODIMP CetfarduinoAin::SetProperty(long User, VARIANT* NewValue) {
if (User) {
CLocalProp* pProp = PROP_FROMUSER(User);
variant_t* val = (variant_t*) NewValue;
// SampleRate property
if (User == USER_VAL(pSampleRate)) {
double newSampleRate = *val;
if (pClockSource == CLOCKSOURCE_SOFTWARE) {
return CswClockedDevice::SetProperty(User, NewValue);
}
// Calculate a sample rate which is compatible with the board
CalculateSampleRate(newSampleRate);
*val = pSampleRate;
}
// ClockSource property
if (User == USER_VAL(pClockSource)) {
if ((long)(*val) == CLOCKSOURCE_SOFTWARE) {
// Software clocking chosen
// First, change the SampleRate to SW clocked defaults
double softwareClockedDefault = 100; // Let's avoid magic values
pSampleRate.SetDefaultValue(CComVariant(softwareClockedDefault));
pSampleRate = softwareClockedDefault;
pSampleRate.SetRange(
CComVariant((double)MIN_SW_SAMPLERATE),
CComVariant((double)MAX_SW_SAMPLERATE));
EnableSwClocking();
// SamplesPerTrigger needs to be configured so that 1s of input data is acquired
pSamplesPerTrigger->put_DefaultValue(CComVariant(softwareClockedDefault));
pSamplesPerTrigger = softwareClockedDefault;
} else {
// Internal (HW) clocking chosen
// First, change the SampleRate to SW clocked defaults
double internalClockDefault = 1000;
pSampleRate.SetDefaultValue(CComVariant(internalClockDefault));
pSampleRate = internalClockDefault;
pSampleRate.SetRange(m_minBoardSampleRate, m_maxBoardSampleRate);
// Za SwClocking ovaj dio uradi CswClockedDevice::EnableSwClocking
RETURN_HRESULT(_DaqHwInfo->put_MemberValue(L"minsamplerate", CComVariant(m_minBoardSampleRate)));
RETURN_HRESULT(_DaqHwInfo->put_MemberValue(L"maxsamplerate", CComVariant(m_maxBoardSampleRate)));
// SamplesPerTrigger needs to be configured so that 1s of input data is acquired
pSamplesPerTrigger->put_DefaultValue(CComVariant(internalClockDefault));
pSamplesPerTrigger = internalClockDefault;
}
}
}
return S_OK;
}
/////////////////////////////////////////////////////////////////////////////
// Open()
//
// Function is called by the OpenDevice(), which is in turn called by the engine.
// CetfarduinoAin::Open() function's main goals are ..
// 1)to initialize the hardware and hardware dependent properties..
// 2)to expose pointers to the engine and the adaptor to each other..
// 3)to process the device ID, which is input by a user in the MATLAB command line.
// The call to this function goes through the hierarchical chain: ..
//..CetfarduinoAin::Open() -> CswClockedDevice::Open() -> CmwDevice::Open()
// CmwDevice::Open() in its turn populates the pointer to the..
//..engine (CmwDevice::_engine), which allows to access all engine interfaces.
// Function MUST BE MODIFIED by the adaptor programmer.
//////////////////////////////////////////////////////////////////////////////
HRESULT CetfarduinoAin::Open(IUnknown* Interface, long ID)
{
if (ID < 0) {
// Undocumented MATLAB Daq Engine bug!
// When Open() returns an error, the reference to the analoginput object is leaked
// and never freed! Thereby, all resources this object owns are also leaked since
// the destructor is never called.
// :TODO: Implement a way to free all resources without the dtor (cannot use RAII for
// this object)
return CComCoClass<ImwDevice>::Error(CComBSTR("etfarduino: Invalid device ID."));
}
RETURN_HRESULT(TBaseObj::Open(Interface));
DeviceId = ID;
TCHAR portName[10];
bool registered =
service.CheckDeviceRegistered(DeviceId, portName);
if (!registered) {
char tempMessage[255];
sprintf(tempMessage, "etfarduino: Device %d not found.", DeviceId);
return CComCoClass<ImwDevice>::Error(CComBSTR(tempMessage));
}
wchar_t idStr[8];
swprintf(idStr, L"%d", ID);
RETURN_HRESULT(_DaqHwInfo->put_MemberValue(CComBSTR(L"id"), CComVariant(idStr)));
// Fixed device config values. They could be moved to a config file.
m_minBoardSampleRate = 4;
m_maxBoardSampleRate = 12500; // 80us period
_engine->GetBufferingConfig(&m_engineBufferSamples, NULL);
// ------------
// SetDaqHwInfo
// ------------
wchar_t deviceName[30];
swprintf(deviceName, _T("etfarduino (Device %d)"), DeviceId);
RETURN_HRESULT(InitHwInfo(
VT_UI2,
Bits,
MAX_CHANNELS, // maximum number of channels
SE_INPUT, // Setting Single Ended input channels
Cetfarduinoadapt::ConstructorName,
deviceName));
RETURN_HRESULT(SetDaqHwInfo());
//////////////////////////////// Properties ///////////////////////////////////
// The following Section sets the Propinfo for the Analog input device //
///////////////////////////////////////////////////////////////////////////////
// Attach to the ClockSource property
ATTACH_PROP(ClockSource);
// The etfarduino must work as both software and internally clocked
EnableSwClocking();
pClockSource->AddMappedEnumValue(CLOCKSOURCE_SOFTWARE, TEXT("Software"));
pClockSource->AddMappedEnumValue(CLOCKSOURCE_INTERNAL, TEXT("Internal"));
pClockSource->put_DefaultValue(CComVariant(CLOCKSOURCE_INTERNAL));
pClockSource = CLOCKSOURCE_INTERNAL;
// SampleRate property
double defaultSampleRate = 1000;
ATTACH_PROP(SampleRate);
pSampleRate.SetDefaultValue(CComVariant(defaultSampleRate));
pSampleRate = defaultSampleRate;
pSampleRate.SetRange(m_minBoardSampleRate, m_maxBoardSampleRate);
RETURN_HRESULT(_DaqHwInfo->put_MemberValue(TEXT("minsamplerate"), CComVariant(m_minBoardSampleRate)));
RETURN_HRESULT(_DaqHwInfo->put_MemberValue(TEXT("maxsamplerate"), CComVariant(m_maxBoardSampleRate)));
// SamplesPerTrigger property
// Needs to be set so that 1s of data is acquired with the default sample rate
ATTACH_PROP(SamplesPerTrigger);
pSamplesPerTrigger->put_DefaultValue(CComVariant(defaultSampleRate));
pSamplesPerTrigger = defaultSampleRate;
// TriggerRepeat property
// How many times will the trigger be repeated
ATTACH_PROP(TriggerRepeat);
// ----------------------------
// Postaviti InputRange default
// ----------------------------
CRemoteProp remoteProp;
CComVariant var;
// Hardcoded input range of [0, 5] [V]
double InputRange[2] = {0., 5.};
CreateSafeVector(InputRange, 2, &var);
remoteProp.Attach(_EngineChannelList, TEXT("inputrange"));
remoteProp->put_DefaultValue(var);
remoteProp->put_User(USER_INPUTRANGE);
remoteProp.SetRange(InputRange[0], InputRange[1]);
remoteProp.Release();
TRemoteProp<long> pInputType;
pInputType.Attach(_EnginePropRoot, L"InputType");
pInputType->AddMappedEnumValue(0, L"SingleEnded");
// TODO: May need to add the ChannelSkewMode enumerated property...
return S_OK;
} // end of Open()
