/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
* the device from the USB host before passing along unhandled control requests to the library for processing
* internally.
*/
void EVENT_USB_Device_ControlRequest(void)
{
/* Ignore any requests that aren't directed to the HID interface */
if ((USB_ControlRequest.bmRequestType & (CONTROL_REQTYPE_TYPE | CONTROL_REQTYPE_RECIPIENT)) !=
(REQTYPE_CLASS | REQREC_INTERFACE))
{
return;
}
/* Process HID specific control requests */
switch (USB_ControlRequest.bRequest)
{
case HID_REQ_SetReport:
Endpoint_ClearSETUP();
/* Wait until the command has been sent by the host */
while (!(Endpoint_IsOUTReceived()));
/* Read in the write destination address */
uint16_t PageAddress = Endpoint_Read_16_LE();
/* Check if the command is a program page command, or a start application command */
if (PageAddress == COMMAND_STARTAPPLICATION)
{
RunBootloader = false;
}
else
{
/* Erase the given FLASH page, ready to be programmed */
boot_page_erase(PageAddress);
boot_spm_busy_wait();
/* Write each of the FLASH page's bytes in sequence */
for (uint8_t PageWord = 0; PageWord < (SPM_PAGESIZE / 2); PageWord++)
{
/* Check if endpoint is empty - if so clear it and wait until ready for next packet */
if (!(Endpoint_BytesInEndpoint()))
{
Endpoint_ClearOUT();
while (!(Endpoint_IsOUTReceived()));
}
/* Write the next data word to the FLASH page */
boot_page_fill(PageAddress + ((uint16_t)PageWord << 1), Endpoint_Read_16_LE());
}
/* Write the filled FLASH page to memory */
boot_page_write(PageAddress);
boot_spm_busy_wait();
/* Re-enable RWW section */
boot_rww_enable();
}
Endpoint_ClearOUT();
Endpoint_ClearStatusStage();
break;
}
}
void USB_Device_ProcessControlRequest(void)
{
#if defined(ARCH_BIG_ENDIAN)
USB_ControlRequest.bmRequestType = Endpoint_Read_8();
USB_ControlRequest.bRequest = Endpoint_Read_8();
USB_ControlRequest.wValue = Endpoint_Read_16_LE();
USB_ControlRequest.wIndex = Endpoint_Read_16_LE();
USB_ControlRequest.wLength = Endpoint_Read_16_LE();
#else
uint8_t* RequestHeader = (uint8_t*)&USB_ControlRequest;
for (uint8_t RequestHeaderByte = 0; RequestHeaderByte < sizeof(USB_Request_Header_t); RequestHeaderByte++)
*(RequestHeader++) = Endpoint_Read_8();
#endif
EVENT_USB_Device_ControlRequest();
if (Endpoint_IsSETUPReceived())
{
uint8_t bmRequestType = USB_ControlRequest.bmRequestType;
switch (USB_ControlRequest.bRequest)
{
case REQ_GetStatus:
if ((bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE)) ||
(bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_ENDPOINT)))
{
USB_Device_GetStatus();
}
break;
case REQ_ClearFeature:
case REQ_SetFeature:
if ((bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE)) ||
(bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT)))
{
USB_Device_ClearSetFeature();
}
break;
case REQ_SetAddress:
if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE))
USB_Device_SetAddress();
break;
case REQ_GetDescriptor:
if ((bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE)) ||
(bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE)))
{
USB_Device_GetDescriptor();
}
break;
case REQ_GetConfiguration:
if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE))
USB_Device_GetConfiguration();
break;
case REQ_SetConfiguration:
if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE))
USB_Device_SetConfiguration();
break;
}
}
if (Endpoint_IsSETUPReceived())
{
Endpoint_StallTransaction();
Endpoint_ClearSETUP();
}
}
void USB_Device_ProcessControlRequest(void)
{
USB_ControlRequest.bmRequestType = Endpoint_Read_8();
USB_ControlRequest.bRequest = Endpoint_Read_8();
USB_ControlRequest.wValue = Endpoint_Read_16_LE();
USB_ControlRequest.wIndex = Endpoint_Read_16_LE();
USB_ControlRequest.wLength = Endpoint_Read_16_LE();
EVENT_USB_Device_ControlRequest();
if (Endpoint_IsSETUPReceived())
{
uint8_t bmRequestType = USB_ControlRequest.bmRequestType;
switch (USB_ControlRequest.bRequest)
{
case REQ_GetStatus:
if ((bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE)) ||
(bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_ENDPOINT)))
{
USB_Device_GetStatus();
}
break;
case REQ_ClearFeature:
case REQ_SetFeature:
if ((bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE)) ||
(bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT)))
{
USB_Device_ClearSetFeature();
}
break;
case REQ_SetAddress:
if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE))
USB_Device_SetAddress();
break;
case REQ_GetDescriptor:
if ((bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE)) ||
(bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE)))
{
USB_Device_GetDescriptor();
}
break;
case REQ_GetConfiguration:
if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE))
USB_Device_GetConfiguration();
break;
case REQ_SetConfiguration:
if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE))
USB_Device_SetConfiguration();
break;
}
}
if (Endpoint_IsSETUPReceived())
{
Endpoint_StallTransaction();
Endpoint_ClearSETUP();
}
}
