void GERBVIEW_FRAME::UpdateTitleAndInfo()
{
GERBER_FILE_IMAGE* gerber = GetGbrImage( getActiveLayer() );
// Display the gerber filename
if( gerber == NULL )
{
SetTitle( "GerbView" );
SetStatusText( wxEmptyString, 0 );
wxString info;
info.Printf( _( "Drawing layer %d not in use" ), getActiveLayer() + 1 );
m_TextInfo->SetValue( info );
if( EnsureTextCtrlWidth( m_TextInfo, &info ) ) // Resized
m_auimgr.Update();
ClearMsgPanel();
return;
}
else
{
wxString title;
title.Printf( L"GerbView \u2014 %s%s",
gerber->m_FileName,
gerber->m_IsX2_file
? " " + _( "(with X2 attributes)" )
: wxString( wxEmptyString ) );
SetTitle( title );
gerber->DisplayImageInfo( this );
// Display Image Name and Layer Name (from the current gerber data):
wxString status;
status.Printf( _( "Image name: '%s' Layer name: '%s'" ),
GetChars( gerber->m_ImageName ),
GetChars( gerber->GetLayerParams().m_LayerName ) );
SetStatusText( status, 0 );
// Display data format like fmt in X3.4Y3.4 no LZ or fmt mm X2.3 Y3.5 no TZ in main toolbar
wxString info;
info.Printf( wxT( "fmt: %s X%d.%d Y%d.%d no %cZ" ),
gerber->m_GerbMetric ? wxT( "mm" ) : wxT( "in" ),
gerber->m_FmtLen.x - gerber->m_FmtScale.x, gerber->m_FmtScale.x,
gerber->m_FmtLen.y - gerber->m_FmtScale.y, gerber->m_FmtScale.y,
gerber->m_NoTrailingZeros ? 'T' : 'L' );
if( gerber->m_IsX2_file )
info << wxT(" ") << _( "X2 attr" );
m_TextInfo->SetValue( info );
if( EnsureTextCtrlWidth( m_TextInfo, &info ) ) // Resized
m_auimgr.Update();
}
}
void SCH_EDIT_FRAME::EditComponent( SCH_COMPONENT* aComponent )
{
wxCHECK_RET( aComponent != NULL && aComponent->Type() == SCH_COMPONENT_T,
wxT( "Invalid component object pointer. Bad Programmer!" ) );
m_canvas->SetIgnoreMouseEvents( true );
DIALOG_EDIT_COMPONENT_IN_SCHEMATIC* dlg = new DIALOG_EDIT_COMPONENT_IN_SCHEMATIC( this );
dlg->InitBuffers( aComponent );
// make sure the chipnameTextCtrl is wide enough to hold any unusually long chip names:
EnsureTextCtrlWidth( dlg->chipnameTextCtrl );
// This dialog itself subsequently can invoke a KIWAY_PLAYER as a quasimodal
// frame. Therefore this dialog as a modal frame parent, MUST be run under
// quasimodal mode for the quasimodal frame support to work. So don't use
// the QUASIMODAL macros here.
int ret = dlg->ShowQuasiModal();
if( m_autoplaceFields )
aComponent->AutoAutoplaceFields( GetScreen() );
m_canvas->SetIgnoreMouseEvents( false );
m_canvas->MoveCursorToCrossHair();
dlg->Destroy();
if( ret == wxID_OK )
GetCanvas()->Refresh();
}
void GERBVIEW_FRAME::UpdateTitleAndInfo()
{
GERBER_IMAGE* gerber = g_GERBER_List.GetGbrImage( getActiveLayer() );
wxString text;
// Display the gerber filename
if( gerber == NULL )
{
text.Printf( wxT( "GerbView %s" ), GetChars( GetBuildVersion() ) );
SetTitle( text );
SetStatusText( wxEmptyString, 0 );
text.Printf( _( "Drawing layer %d not in use" ), getActiveLayer() + 1 );
m_TextInfo->SetValue( text );
ClearMsgPanel();
return;
}
text = _( "File:" );
text << wxT( " " ) << gerber->m_FileName;
if( gerber->m_IsX2_file )
text << wxT( " " ) << _( "(with X2 Attributes)" );
SetTitle( text );
gerber->DisplayImageInfo();
// Display Image Name and Layer Name (from the current gerber data):
text.Printf( _( "Image name: '%s' Layer name: '%s'" ),
GetChars( gerber->m_ImageName ),
GetChars( gerber->GetLayerParams().m_LayerName ) );
SetStatusText( text, 0 );
// Display data format like fmt in X3.4Y3.4 no LZ or fmt mm X2.3 Y3.5 no TZ in main toolbar
text.Printf( wxT( "fmt: %s X%d.%d Y%d.%d no %cZ" ),
gerber->m_GerbMetric ? wxT( "mm" ) : wxT( "in" ),
gerber->m_FmtLen.x - gerber->m_FmtScale.x, gerber->m_FmtScale.x,
gerber->m_FmtLen.y - gerber->m_FmtScale.y, gerber->m_FmtScale.y,
gerber->m_NoTrailingZeros ? 'T' : 'L' );
if( gerber->m_IsX2_file )
text << wxT(" ") << _( "X2 attr" );
m_TextInfo->SetValue( text );
if( EnsureTextCtrlWidth( m_TextInfo, &text ) ) // Resized
m_auimgr.Update();
}
void SCH_EDIT_FRAME::EditComponent( SCH_COMPONENT* aComponent )
{
wxCHECK_RET( aComponent != NULL && aComponent->Type() == SCH_COMPONENT_T,
wxT( "Invalid component object pointer. Bad Programmer!" ) );
m_canvas->SetIgnoreMouseEvents( true );
DIALOG_EDIT_COMPONENT_IN_SCHEMATIC* dlg = new DIALOG_EDIT_COMPONENT_IN_SCHEMATIC( this );
dlg->InitBuffers( aComponent );
// make sure the chipnameTextCtrl is wide enough to hold any unusually long chip names:
EnsureTextCtrlWidth( dlg->chipnameTextCtrl );
dlg->ShowQuasiModal();
m_canvas->SetIgnoreMouseEvents( false );
m_canvas->MoveCursorToCrossHair();
dlg->Destroy();
}
void DIALOG_LABEL_EDITOR::InitDialog()
{
wxString msg;
bool multiLine = false;
if( m_CurrentText->IsMultilineAllowed() )
{
m_textLabel = m_textLabelMultiLine;
m_textLabelSingleLine->Show( false );
multiLine = true;
}
else
{
m_textLabel = m_textLabelSingleLine;
m_textLabelMultiLine->Show( false );
wxTextValidator* validator = (wxTextValidator*) m_textLabel->GetValidator();
wxArrayString excludes;
// Add invalid label characters to this list.
excludes.Add( wxT( " " ) );
validator->SetExcludes( excludes );
}
m_textLabel->SetValue( m_CurrentText->GetText() );
m_textLabel->SetFocus();
switch( m_CurrentText->Type() )
{
case SCH_GLOBAL_LABEL_T:
SetTitle( _( "Global Label Properties" ) );
break;
case SCH_HIERARCHICAL_LABEL_T:
SetTitle( _( "Hierarchical Label Properties" ) );
break;
case SCH_LABEL_T:
SetTitle( _( "Label Properties" ) );
break;
case SCH_SHEET_PIN_T:
SetTitle( _( "Hierarchical Sheet Pin Properties." ) );
break;
default:
SetTitle( _( "Text Properties" ) );
break;
}
const int MINTEXTWIDTH = 40; // M's are big characters, a few establish a lot of width
int max_len = 0;
if ( !multiLine )
{
max_len = m_CurrentText->GetText().Length();
}
else
{
// calculate the length of the biggest line
// we cannot use the length of the entire text that has no meaning
int curr_len = MINTEXTWIDTH;
int imax = m_CurrentText->GetText().Length();
for( int count = 0; count < imax; count++ )
{
if( m_CurrentText->GetText()[count] == '\n' ||
m_CurrentText->GetText()[count] == '\r' ) // new line
{
curr_len = 0;
}
else
{
curr_len++;
if ( max_len < curr_len )
max_len = curr_len;
}
}
}
if( max_len < MINTEXTWIDTH )
max_len = MINTEXTWIDTH;
wxString textWidth;
textWidth.Append( 'M', MINTEXTWIDTH );
EnsureTextCtrlWidth( m_textLabel, &textWidth );
// Set validators
m_TextOrient->SetSelection( m_CurrentText->GetOrientation() );
m_TextShape->SetSelection( m_CurrentText->GetShape() );
int style = 0;
if( m_CurrentText->IsItalic() )
style = 1;
if( m_CurrentText->IsBold() )
style += 2;
m_TextStyle->SetSelection( style );
wxString units = ReturnUnitSymbol( g_UserUnit, wxT( "(%s)" ) );
msg.Printf( _( "H%s x W%s" ), GetChars( units ), GetChars( units ) );
m_staticSizeUnits->SetLabel( msg );
msg = StringFromValue( g_UserUnit, m_CurrentText->GetSize().x );
m_TextSize->SetValue( msg );
if( m_CurrentText->Type() != SCH_GLOBAL_LABEL_T
&& m_CurrentText->Type() != SCH_HIERARCHICAL_LABEL_T )
{
m_TextShape->Show( false );
}
m_sdbSizer1OK->SetDefault();
}
void DIALOG_LABEL_EDITOR::InitDialog()
{
wxString msg;
bool multiLine = false;
if( m_CurrentText->m_MultilineAllowed )
{
m_textLabel = m_textLabelMultiLine;
m_textLabelSingleLine->Show(false);
multiLine = true;
}
else
{
m_textLabel = m_textLabelSingleLine;
m_textLabelMultiLine->Show(false);
}
m_textLabel->SetValue( m_CurrentText->m_Text );
m_textLabel->SetFocus();
switch( m_CurrentText->Type() )
{
case SCH_GLOBAL_LABEL_T:
SetTitle( _( "Global Label Properties" ) );
break;
case SCH_HIERARCHICAL_LABEL_T:
SetTitle( _( "Hierarchical Label Properties" ) );
break;
case SCH_LABEL_T:
SetTitle( _( "Label Properties" ) );
break;
case SCH_SHEET_PIN_T:
SetTitle( _( "Hierarchical Sheet Pin Properties." ) );
break;
default:
SetTitle( _( "Text Properties" ) );
m_textLabel->Disconnect( wxEVT_COMMAND_TEXT_ENTER,
wxCommandEventHandler ( DIALOG_LABEL_EDITOR::OnEnterKey ),
NULL, this );
break;
}
int MINTEXTWIDTH = 40; // M's are big characters, a few establish a lot of width
int max_len = 0;
if ( !multiLine )
{
max_len =m_CurrentText->m_Text.Length();
}
else
{
// calculate the length of the biggest line
// we cannot use the length of the entire text that has no meaning
int curr_len = MINTEXTWIDTH;
int imax = m_CurrentText->m_Text.Len();
for( int count = 0; count < imax; count++ )
{
if( m_CurrentText->m_Text[count] == '\n' ||
m_CurrentText->m_Text[count] == '\r' ) // new line
{
curr_len = 0;
}
else
{
curr_len++;
if ( max_len < curr_len )
max_len = curr_len;
}
}
}
if( max_len < MINTEXTWIDTH )
max_len = MINTEXTWIDTH;
wxString textWidth;
textWidth.Append( 'M', MINTEXTWIDTH );
EnsureTextCtrlWidth( m_textLabel, &textWidth );
// Set validators
m_TextOrient->SetSelection( m_CurrentText->GetOrientation() );
m_TextShape->SetSelection( m_CurrentText->GetShape() );
int style = 0;
if( m_CurrentText->m_Italic )
style = 1;
if( m_CurrentText->m_Bold )
style += 2;
m_TextStyle->SetSelection( style );
wxString units = ReturnUnitSymbol( g_UserUnit, wxT( "(%s)" ) );
msg = _( "H" ) + units + _( " x W" ) + units;
m_staticSizeUnits->SetLabel( msg );
msg = ReturnStringFromValue( g_UserUnit, m_CurrentText->m_Size.x );
m_TextSize->SetValue( msg );
if( m_CurrentText->Type() != SCH_GLOBAL_LABEL_T
&& m_CurrentText->Type() != SCH_HIERARCHICAL_LABEL_T )
{
m_TextShape->Show( false );
}
m_sdbSizer1OK->SetDefault();
}
