/**
* @brief main
* Main routine for IAP application
* @param None
* @retval int
*/
int main(void)
{
/* STM32 evalboard user initialization */
BSP_Init();
/* Flash unlock */
FLASH_If_FlashUnlock();
/* Test if User button on the Discovery kit is pressed */
if (STM_EVAL_PBGetState(BUTTON_USER) == Bit_RESET)
{
/* Check Vector Table: Test if user code is programmed starting from address
"APPLICATION_ADDRESS" */
if (((*(__IO uint32_t*)APPLICATION_ADDRESS) & 0x2FFE0000 ) == 0x20000000)
{
/* Jump to user application */
JumpAddress = *(__IO uint32_t*) (APPLICATION_ADDRESS + 4);
Jump_To_Application = (pFunction) JumpAddress;
/* Initialize user application's Stack Pointer */
__set_MSP(*(__IO uint32_t*) APPLICATION_ADDRESS);
Jump_To_Application();
}
}
/* Init Host Library */
USBH_Init(&USB_OTG_Core, USB_OTG_FS_CORE_ID, &USB_Host, &USBH_MSC_cb, &USR_Callbacks);
while (1)
{
/* Host Task handler */
USBH_Process(&USB_OTG_Core, &USB_Host);
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Configure Key Button */
BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);
/* Unlock the Flash to enable the flash control register access */
FLASH_If_FlashUnlock();
/* Test if User button on the STM324x9I_EVAL is pressed */
if (BSP_PB_GetState(BUTTON_KEY) != GPIO_PIN_RESET)
{
/* Check Vector Table: Test if user code is programmed starting from address
"APPLICATION_ADDRESS" */
if ((((*(__IO uint32_t*)APPLICATION_ADDRESS) & 0xFF000000 ) == 0x20000000) || \
(((*(__IO uint32_t*)APPLICATION_ADDRESS) & 0xFF000000 ) == 0x10000000))
{
/* Jump to user application */
JumpAddress = *(__IO uint32_t*) (APPLICATION_ADDRESS + 4);
Jump_To_Application = (pFunction) JumpAddress;
/* Initialize user application's Stack Pointer */
__set_MSP(*(__IO uint32_t*) APPLICATION_ADDRESS);
Jump_To_Application();
}
}
/* STM32F4xx HAL library initialization:
- Configure the Flash prefetch, instruction and Data caches
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
/* Configure the system clock to 168 MHz */
SystemClock_Config();
/* Init FW upgrade Application */
FW_InitApplication();
/* Init Host Library */
USBH_Init(&hUSBHost, USBH_UserProcess, 0);
/* Add Supported Class */
USBH_RegisterClass(&hUSBHost, USBH_MSC_CLASS);
/* Start Host Process */
USBH_Start(&hUSBHost);
/* Run Application (Blocking mode)*/
while (1)
{
/* USB Host Background task */
USBH_Process(&hUSBHost);
/* FW Menu Process */
FW_UPGRADE_Process();
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Configure Key Button */
BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);
/* Unlock the Flash to enable the flash control register access */
FLASH_If_FlashUnlock();
/* Test if User button on the STM32446E_EVAL is pressed */
if (BSP_PB_GetState(BUTTON_KEY) != GPIO_PIN_SET)
{
/* Check Vector Table: Test if user code is programmed starting from address
"APPLICATION_ADDRESS" */
if (((*(__IO uint32_t*)APPLICATION_ADDRESS) & 0xFF000000 ) == 0x20000000)
{
/* Jump to user application */
JumpAddress = *(__IO uint32_t*) (APPLICATION_ADDRESS + 4);
Jump_To_Application = (pFunction) JumpAddress;
/* Initialize user application's Stack Pointer */
__set_MSP(*(__IO uint32_t*) APPLICATION_ADDRESS);
Jump_To_Application();
}
}
/* STM32F446xx HAL library initialization */
HAL_Init();
/* Configure the system clock to 180 Mhz */
SystemClock_Config();
/* Initialize IO expander */
BSP_IO_Init();
/* Init FW upgrade Application */
FW_InitApplication();
/* Init Host Library */
USBH_Init(&hUSBHost, USBH_UserProcess, 0);
/* Add Supported Class */
USBH_RegisterClass(&hUSBHost, USBH_MSC_CLASS);
/* Start Host Process */
USBH_Start(&hUSBHost);
/* Run Application (Blocking mode)*/
while (1)
{
/* USB Host Background task */
USBH_Process(&hUSBHost);
/* FW Menu Process */
FW_UPGRADE_Process();
}
}
