/* convert a slot's glyph image into a bitmap */ static FT_Error ft_smooth_render_generic( FT_Renderer render, FT_GlyphSlot slot, FT_Render_Mode mode, const FT_Vector* origin, FT_Render_Mode required_mode ) { FT_Error error; FT_Outline* outline = NULL; FT_BBox cbox; FT_UInt width, height, pitch; #ifndef FT_CONFIG_OPTION_SUBPIXEL_RENDERING FT_UInt height_org, width_org; #endif FT_Bitmap* bitmap; FT_Memory memory; FT_Int hmul = mode == FT_RENDER_MODE_LCD; FT_Int vmul = mode == FT_RENDER_MODE_LCD_V; FT_Pos x_shift, y_shift, x_left, y_top; FT_Raster_Params params; /* check glyph image format */ if ( slot->format != render->glyph_format ) { error = Smooth_Err_Invalid_Argument; goto Exit; } /* check mode */ if ( mode != required_mode ) return Smooth_Err_Cannot_Render_Glyph; outline = &slot->outline; /* translate the outline to the new origin if needed */ if ( origin ) FT_Outline_Translate( outline, origin->x, origin->y ); /* compute the control box, and grid fit it */ FT_Outline_Get_CBox( outline, &cbox ); cbox.xMin = FT_PIX_FLOOR( cbox.xMin ); cbox.yMin = FT_PIX_FLOOR( cbox.yMin ); cbox.xMax = FT_PIX_CEIL( cbox.xMax ); cbox.yMax = FT_PIX_CEIL( cbox.yMax ); if ( cbox.xMin < 0 && cbox.xMax > FT_INT_MAX + cbox.xMin ) { FT_ERROR(( "ft_smooth_render_generic: glyph too large:" " xMin = %d, xMax = %d\n", cbox.xMin >> 6, cbox.xMax >> 6 )); return Smooth_Err_Raster_Overflow; }
FT_Glyph_Get_CBox( FT_Glyph glyph, FT_UInt bbox_mode, FT_BBox *acbox ) { const FT_Glyph_Class* clazz; if ( !acbox ) return; acbox->xMin = acbox->yMin = acbox->xMax = acbox->yMax = 0; if ( !glyph || !glyph->clazz ) return; else { clazz = glyph->clazz; if ( !clazz->glyph_bbox ) return; else { /* retrieve bbox in 26.6 coordinates */ clazz->glyph_bbox( glyph, acbox ); /* perform grid fitting if needed */ if ( bbox_mode == FT_GLYPH_BBOX_GRIDFIT || bbox_mode == FT_GLYPH_BBOX_PIXELS ) { acbox->xMin = FT_PIX_FLOOR( acbox->xMin ); acbox->yMin = FT_PIX_FLOOR( acbox->yMin ); acbox->xMax = FT_PIX_CEIL( acbox->xMax ); acbox->yMax = FT_PIX_CEIL( acbox->yMax ); } /* convert to integer pixels if needed */ if ( bbox_mode == FT_GLYPH_BBOX_TRUNCATE || bbox_mode == FT_GLYPH_BBOX_PIXELS ) { acbox->xMin >>= 6; acbox->yMin >>= 6; acbox->xMax >>= 6; acbox->yMax >>= 6; } } }
/* convert a slot's glyph image into a bitmap */ static FT_Error ft_raster1_render( FT_Renderer render, FT_GlyphSlot slot, FT_Render_Mode mode, const FT_Vector* origin ) { FT_Error error; FT_Outline* outline; FT_BBox cbox, cbox0; FT_UInt width, height, pitch; FT_Bitmap* bitmap; FT_Memory memory; FT_Raster_Params params; /* check glyph image format */ if ( slot->format != render->glyph_format ) { error = Raster_Err_Invalid_Argument; goto Exit; } /* check rendering mode */ #ifndef FT_CONFIG_OPTION_PIC if ( mode != FT_RENDER_MODE_MONO ) { /* raster1 is only capable of producing monochrome bitmaps */ if ( render->clazz == &ft_raster1_renderer_class ) return Raster_Err_Cannot_Render_Glyph; } else { /* raster5 is only capable of producing 5-gray-levels bitmaps */ if ( render->clazz == &ft_raster5_renderer_class ) return Raster_Err_Cannot_Render_Glyph; } #else /* FT_CONFIG_OPTION_PIC */ /* When PIC is enabled, we cannot get to the class object */ /* so instead we check the final character in the class name */ /* ("raster5" or "raster1"). Yes this is a hack. */ /* The "correct" thing to do is have different render function */ /* for each of the classes. */ if ( mode != FT_RENDER_MODE_MONO ) { /* raster1 is only capable of producing monochrome bitmaps */ if ( render->clazz->root.module_name[6] == '1' ) return Raster_Err_Cannot_Render_Glyph; } else { /* raster5 is only capable of producing 5-gray-levels bitmaps */ if ( render->clazz->root.module_name[6] == '5' ) return Raster_Err_Cannot_Render_Glyph; } #endif /* FT_CONFIG_OPTION_PIC */ outline = &slot->outline; /* translate the outline to the new origin if needed */ if ( origin ) FT_Outline_Translate( outline, origin->x, origin->y ); /* compute the control box, and grid fit it */ FT_Outline_Get_CBox( outline, &cbox0 ); /* undocumented but confirmed: bbox values get rounded */ #if 1 cbox.xMin = FT_PIX_ROUND( cbox0.xMin ); cbox.yMin = FT_PIX_ROUND( cbox0.yMin ); cbox.xMax = FT_PIX_ROUND( cbox0.xMax ); cbox.yMax = FT_PIX_ROUND( cbox0.yMax ); #else cbox.xMin = FT_PIX_FLOOR( cbox.xMin ); cbox.yMin = FT_PIX_FLOOR( cbox.yMin ); cbox.xMax = FT_PIX_CEIL( cbox.xMax ); cbox.yMax = FT_PIX_CEIL( cbox.yMax ); #endif /* in the event either width or height round to 0, */ /* try explicitly rounding up/down. In the case of */ /* glyphs containing only one very narrow feature, */ /* this give the drop-out compensation in the */ /* in the scan conversion code to do its stuff. */ width = (FT_UInt)( ( cbox.xMax - cbox.xMin ) >> 6 ); if ( width == 0 ) { cbox.xMin = FT_PIX_FLOOR( cbox0.xMin ); cbox.xMax = FT_PIX_CEIL( cbox0.xMax ); width = (FT_UInt)( ( cbox.xMax - cbox.xMin ) >> 6 ); }
af_loader_load_glyph( AF_Loader loader, AF_Module module, FT_Face face, FT_UInt glyph_index, FT_Int32 load_flags ) { FT_Error error; FT_Size size = face->size; FT_Size_Internal size_internal = size->internal; FT_GlyphSlot slot = face->glyph; FT_Slot_Internal slot_internal = slot->internal; FT_GlyphLoader gloader = slot_internal->loader; AF_GlyphHints hints = loader->hints; AF_ScalerRec scaler; AF_StyleMetrics style_metrics; FT_UInt style_options = AF_STYLE_NONE_DFLT; AF_StyleClass style_class; AF_WritingSystemClass writing_system_class; if ( !size ) return FT_THROW( Invalid_Size_Handle ); FT_ZERO( &scaler ); if ( !size_internal->autohint_metrics.x_scale || size_internal->autohint_mode != FT_LOAD_TARGET_MODE( load_flags ) ) { /* switching between hinting modes usually means different scaling */ /* values; this later on enforces recomputation of everything */ /* related to the current size */ size_internal->autohint_mode = FT_LOAD_TARGET_MODE( load_flags ); size_internal->autohint_metrics = size->metrics; #ifdef AF_CONFIG_OPTION_TT_SIZE_METRICS { FT_Size_Metrics* size_metrics = &size_internal->autohint_metrics; /* set metrics to integer values and adjust scaling accordingly; */ /* this is the same setup as with TrueType fonts, cf. function */ /* `tt_size_reset' in file `ttobjs.c' */ size_metrics->ascender = FT_PIX_ROUND( FT_MulFix( face->ascender, size_metrics->y_scale ) ); size_metrics->descender = FT_PIX_ROUND( FT_MulFix( face->descender, size_metrics->y_scale ) ); size_metrics->height = FT_PIX_ROUND( FT_MulFix( face->height, size_metrics->y_scale ) ); size_metrics->x_scale = FT_DivFix( size_metrics->x_ppem << 6, face->units_per_EM ); size_metrics->y_scale = FT_DivFix( size_metrics->y_ppem << 6, face->units_per_EM ); size_metrics->max_advance = FT_PIX_ROUND( FT_MulFix( face->max_advance_width, size_metrics->x_scale ) ); } #endif /* AF_CONFIG_OPTION_TT_SIZE_METRICS */ } /* * TODO: This code currently doesn't support fractional advance widths, * i.e., placing hinted glyphs at anything other than integer * x-positions. This is only relevant for the warper code, which * scales and shifts glyphs to optimize blackness of stems (hinting on * the x-axis by nature places things on pixel integers, hinting on the * y-axis only, i.e., LIGHT mode, doesn't touch the x-axis). The delta * values of the scaler would need to be adjusted. */ scaler.face = face; scaler.x_scale = size_internal->autohint_metrics.x_scale; scaler.x_delta = 0; scaler.y_scale = size_internal->autohint_metrics.y_scale; scaler.y_delta = 0; scaler.render_mode = FT_LOAD_TARGET_MODE( load_flags ); scaler.flags = 0; /* note that the fallback style can't be changed anymore */ /* after the first call of `af_loader_load_glyph' */ error = af_loader_reset( loader, module, face ); if ( error ) goto Exit; #ifdef FT_OPTION_AUTOFIT2 /* XXX: undocumented hook to activate the latin2 writing system. */ if ( load_flags & ( 1UL << 20 ) ) style_options = AF_STYLE_LTN2_DFLT; #endif /* * Glyphs (really code points) are assigned to scripts. Script * analysis is done lazily: For each glyph that passes through here, * the corresponding script analyzer is called, but returns immediately * if it has been run already. */ error = af_face_globals_get_metrics( loader->globals, glyph_index, style_options, &style_metrics ); if ( error ) goto Exit; style_class = style_metrics->style_class; writing_system_class = af_writing_system_classes[style_class->writing_system]; loader->metrics = style_metrics; if ( writing_system_class->style_metrics_scale ) writing_system_class->style_metrics_scale( style_metrics, &scaler ); else style_metrics->scaler = scaler; if ( writing_system_class->style_hints_init ) { error = writing_system_class->style_hints_init( hints, style_metrics ); if ( error ) goto Exit; } /* * Do the main work of `af_loader_load_glyph'. Note that we never have * to deal with composite glyphs as those get loaded into * FT_GLYPH_FORMAT_OUTLINE by the recursed `FT_Load_Glyph' function. * In the rare cases where FT_LOAD_NO_RECURSE is set, it implies * FT_LOAD_NO_SCALE and as such the auto-hinter is never called. */ load_flags |= FT_LOAD_NO_SCALE | FT_LOAD_IGNORE_TRANSFORM | FT_LOAD_LINEAR_DESIGN; load_flags &= ~FT_LOAD_RENDER; error = FT_Load_Glyph( face, glyph_index, load_flags ); if ( error ) goto Exit; /* * Apply stem darkening (emboldening) here before hints are applied to * the outline. Glyphs are scaled down proportionally to the * emboldening so that curve points don't fall outside their * precomputed blue zones. * * Any emboldening done by the font driver (e.g., the CFF driver) * doesn't reach here because the autohinter loads the unprocessed * glyphs in font units for analysis (functions `af_*_metrics_init_*') * and then above to prepare it for the rasterizers by itself, * independently of the font driver. So emboldening must be done here, * within the autohinter. * * All glyphs to be autohinted pass through here one by one. The * standard widths can therefore change from one glyph to the next, * depending on what script a glyph is assigned to (each script has its * own set of standard widths and other metrics). The darkening amount * must therefore be recomputed for each size and * `standard_{vertical,horizontal}_width' change. * * Ignore errors and carry on without emboldening. * */ /* stem darkening only works well in `light' mode */ if ( scaler.render_mode == FT_RENDER_MODE_LIGHT && ( !face->internal->no_stem_darkening || ( face->internal->no_stem_darkening < 0 && !module->no_stem_darkening ) ) ) af_loader_embolden_glyph_in_slot( loader, face, style_metrics ); loader->transformed = slot_internal->glyph_transformed; if ( loader->transformed ) { FT_Matrix inverse; loader->trans_matrix = slot_internal->glyph_matrix; loader->trans_delta = slot_internal->glyph_delta; inverse = loader->trans_matrix; if ( !FT_Matrix_Invert( &inverse ) ) FT_Vector_Transform( &loader->trans_delta, &inverse ); } switch ( slot->format ) { case FT_GLYPH_FORMAT_OUTLINE: /* translate the loaded glyph when an internal transform is needed */ if ( loader->transformed ) FT_Outline_Translate( &slot->outline, loader->trans_delta.x, loader->trans_delta.y ); /* compute original horizontal phantom points */ /* (and ignore vertical ones) */ loader->pp1.x = hints->x_delta; loader->pp1.y = hints->y_delta; loader->pp2.x = FT_MulFix( slot->metrics.horiAdvance, hints->x_scale ) + hints->x_delta; loader->pp2.y = hints->y_delta; /* be sure to check for spacing glyphs */ if ( slot->outline.n_points == 0 ) goto Hint_Metrics; /* now load the slot image into the auto-outline */ /* and run the automatic hinting process */ if ( writing_system_class->style_hints_apply ) { error = writing_system_class->style_hints_apply( glyph_index, hints, &gloader->base.outline, style_metrics ); if ( error ) goto Exit; } /* we now need to adjust the metrics according to the change in */ /* width/positioning that occurred during the hinting process */ if ( scaler.render_mode != FT_RENDER_MODE_LIGHT ) { AF_AxisHints axis = &hints->axis[AF_DIMENSION_HORZ]; if ( axis->num_edges > 1 && AF_HINTS_DO_ADVANCE( hints ) ) { AF_Edge edge1 = axis->edges; /* leftmost edge */ AF_Edge edge2 = edge1 + axis->num_edges - 1; /* rightmost edge */ FT_Pos old_rsb = loader->pp2.x - edge2->opos; /* loader->pp1.x is always zero at this point of time */ FT_Pos old_lsb = edge1->opos; /* - loader->pp1.x */ FT_Pos new_lsb = edge1->pos; /* remember unhinted values to later account */ /* for rounding errors */ FT_Pos pp1x_uh = new_lsb - old_lsb; FT_Pos pp2x_uh = edge2->pos + old_rsb; /* prefer too much space over too little space */ /* for very small sizes */ if ( old_lsb < 24 ) pp1x_uh -= 8; if ( old_rsb < 24 ) pp2x_uh += 8; loader->pp1.x = FT_PIX_ROUND( pp1x_uh ); loader->pp2.x = FT_PIX_ROUND( pp2x_uh ); if ( loader->pp1.x >= new_lsb && old_lsb > 0 ) loader->pp1.x -= 64; if ( loader->pp2.x <= edge2->pos && old_rsb > 0 ) loader->pp2.x += 64; slot->lsb_delta = loader->pp1.x - pp1x_uh; slot->rsb_delta = loader->pp2.x - pp2x_uh; } else { FT_Pos pp1x = loader->pp1.x; FT_Pos pp2x = loader->pp2.x; loader->pp1.x = FT_PIX_ROUND( pp1x + hints->xmin_delta ); loader->pp2.x = FT_PIX_ROUND( pp2x + hints->xmax_delta ); slot->lsb_delta = loader->pp1.x - pp1x; slot->rsb_delta = loader->pp2.x - pp2x; } } /* `light' mode uses integer advance widths */ /* but sets `lsb_delta' and `rsb_delta' */ else { FT_Pos pp1x = loader->pp1.x; FT_Pos pp2x = loader->pp2.x; loader->pp1.x = FT_PIX_ROUND( pp1x ); loader->pp2.x = FT_PIX_ROUND( pp2x ); slot->lsb_delta = loader->pp1.x - pp1x; slot->rsb_delta = loader->pp2.x - pp2x; } break; default: /* we don't support other formats (yet?) */ error = FT_THROW( Unimplemented_Feature ); } Hint_Metrics: { FT_BBox bbox; FT_Vector vvector; vvector.x = slot->metrics.vertBearingX - slot->metrics.horiBearingX; vvector.y = slot->metrics.vertBearingY - slot->metrics.horiBearingY; vvector.x = FT_MulFix( vvector.x, style_metrics->scaler.x_scale ); vvector.y = FT_MulFix( vvector.y, style_metrics->scaler.y_scale ); /* transform the hinted outline if needed */ if ( loader->transformed ) { FT_Outline_Transform( &gloader->base.outline, &loader->trans_matrix ); FT_Vector_Transform( &vvector, &loader->trans_matrix ); } /* we must translate our final outline by -pp1.x and compute */ /* the new metrics */ if ( loader->pp1.x ) FT_Outline_Translate( &gloader->base.outline, -loader->pp1.x, 0 ); FT_Outline_Get_CBox( &gloader->base.outline, &bbox ); bbox.xMin = FT_PIX_FLOOR( bbox.xMin ); bbox.yMin = FT_PIX_FLOOR( bbox.yMin ); bbox.xMax = FT_PIX_CEIL( bbox.xMax ); bbox.yMax = FT_PIX_CEIL( bbox.yMax ); slot->metrics.width = bbox.xMax - bbox.xMin; slot->metrics.height = bbox.yMax - bbox.yMin; slot->metrics.horiBearingX = bbox.xMin; slot->metrics.horiBearingY = bbox.yMax; slot->metrics.vertBearingX = FT_PIX_FLOOR( bbox.xMin + vvector.x ); slot->metrics.vertBearingY = FT_PIX_FLOOR( bbox.yMax + vvector.y ); /* for mono-width fonts (like Andale, Courier, etc.) we need */ /* to keep the original rounded advance width; ditto for */ /* digits if all have the same advance width */ if ( scaler.render_mode != FT_RENDER_MODE_LIGHT && ( FT_IS_FIXED_WIDTH( slot->face ) || ( af_face_globals_is_digit( loader->globals, glyph_index ) && style_metrics->digits_have_same_width ) ) ) { slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance, style_metrics->scaler.x_scale ); /* Set delta values to 0. Otherwise code that uses them is */ /* going to ruin the fixed advance width. */ slot->lsb_delta = 0; slot->rsb_delta = 0; } else { /* non-spacing glyphs must stay as-is */ if ( slot->metrics.horiAdvance ) slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x; } slot->metrics.vertAdvance = FT_MulFix( slot->metrics.vertAdvance, style_metrics->scaler.y_scale ); slot->metrics.horiAdvance = FT_PIX_ROUND( slot->metrics.horiAdvance ); slot->metrics.vertAdvance = FT_PIX_ROUND( slot->metrics.vertAdvance ); slot->format = FT_GLYPH_FORMAT_OUTLINE; } Exit: return error; }
static FT_Error af_loader_load_g( AF_Loader loader, AF_Scaler scaler, FT_UInt glyph_index, FT_Int32 load_flags, FT_UInt depth ) { FT_Error error; FT_Face face = loader->face; FT_GlyphLoader gloader = loader->gloader; AF_ScriptMetrics metrics = loader->metrics; AF_GlyphHints hints = &loader->hints; FT_GlyphSlot slot = face->glyph; FT_Slot_Internal internal = slot->internal; FT_Int32 flags; flags = load_flags | FT_LOAD_LINEAR_DESIGN; error = FT_Load_Glyph( face, glyph_index, flags ); if ( error ) goto Exit; loader->transformed = internal->glyph_transformed; if ( loader->transformed ) { FT_Matrix inverse; loader->trans_matrix = internal->glyph_matrix; loader->trans_delta = internal->glyph_delta; inverse = loader->trans_matrix; FT_Matrix_Invert( &inverse ); FT_Vector_Transform( &loader->trans_delta, &inverse ); } switch ( slot->format ) { case FT_GLYPH_FORMAT_OUTLINE: /* translate the loaded glyph when an internal transform is needed */ if ( loader->transformed ) FT_Outline_Translate( &slot->outline, loader->trans_delta.x, loader->trans_delta.y ); /* copy the outline points in the loader's current */ /* extra points which are used to keep original glyph coordinates */ error = FT_GLYPHLOADER_CHECK_POINTS( gloader, slot->outline.n_points + 4, slot->outline.n_contours ); if ( error ) goto Exit; FT_ARRAY_COPY( gloader->current.outline.points, slot->outline.points, slot->outline.n_points ); FT_ARRAY_COPY( gloader->current.outline.contours, slot->outline.contours, slot->outline.n_contours ); FT_ARRAY_COPY( gloader->current.outline.tags, slot->outline.tags, slot->outline.n_points ); gloader->current.outline.n_points = slot->outline.n_points; gloader->current.outline.n_contours = slot->outline.n_contours; /* compute original horizontal phantom points (and ignore */ /* vertical ones) */ loader->pp1.x = hints->x_delta; loader->pp1.y = hints->y_delta; loader->pp2.x = FT_MulFix( slot->metrics.horiAdvance, hints->x_scale ) + hints->x_delta; loader->pp2.y = hints->y_delta; /* be sure to check for spacing glyphs */ if ( slot->outline.n_points == 0 ) goto Hint_Metrics; /* now load the slot image into the auto-outline and run the */ /* automatic hinting process */ if ( metrics->clazz->script_hints_apply ) metrics->clazz->script_hints_apply( hints, &gloader->current.outline, metrics ); /* we now need to adjust the metrics according to the change in */ /* width/positioning that occurred during the hinting process */ if ( scaler->render_mode != FT_RENDER_MODE_LIGHT ) { FT_Pos old_rsb, old_lsb, new_lsb; FT_Pos pp1x_uh, pp2x_uh; AF_AxisHints axis = &hints->axis[AF_DIMENSION_HORZ]; AF_Edge edge1 = axis->edges; /* leftmost edge */ AF_Edge edge2 = edge1 + axis->num_edges - 1; /* rightmost edge */ if ( axis->num_edges > 1 && AF_HINTS_DO_ADVANCE( hints ) ) { old_rsb = loader->pp2.x - edge2->opos; old_lsb = edge1->opos; new_lsb = edge1->pos; /* remember unhinted values to later account */ /* for rounding errors */ pp1x_uh = new_lsb - old_lsb; pp2x_uh = edge2->pos + old_rsb; /* prefer too much space over too little space */ /* for very small sizes */ if ( old_lsb < 24 ) pp1x_uh -= 8; if ( old_rsb < 24 ) pp2x_uh += 8; loader->pp1.x = FT_PIX_ROUND( pp1x_uh ); loader->pp2.x = FT_PIX_ROUND( pp2x_uh ); if ( loader->pp1.x >= new_lsb && old_lsb > 0 ) loader->pp1.x -= 64; if ( loader->pp2.x <= edge2->pos && old_rsb > 0 ) loader->pp2.x += 64; slot->lsb_delta = loader->pp1.x - pp1x_uh; slot->rsb_delta = loader->pp2.x - pp2x_uh; } else { FT_Pos pp1x = loader->pp1.x; FT_Pos pp2x = loader->pp2.x; loader->pp1.x = FT_PIX_ROUND( pp1x ); loader->pp2.x = FT_PIX_ROUND( pp2x ); slot->lsb_delta = loader->pp1.x - pp1x; slot->rsb_delta = loader->pp2.x - pp2x; } } else { FT_Pos pp1x = loader->pp1.x; FT_Pos pp2x = loader->pp2.x; loader->pp1.x = FT_PIX_ROUND( pp1x + hints->xmin_delta ); loader->pp2.x = FT_PIX_ROUND( pp2x + hints->xmax_delta ); slot->lsb_delta = loader->pp1.x - pp1x; slot->rsb_delta = loader->pp2.x - pp2x; } /* good, we simply add the glyph to our loader's base */ FT_GlyphLoader_Add( gloader ); break; case FT_GLYPH_FORMAT_COMPOSITE: { FT_UInt nn, num_subglyphs = slot->num_subglyphs; FT_UInt num_base_subgs, start_point; FT_SubGlyph subglyph; start_point = gloader->base.outline.n_points; /* first of all, copy the subglyph descriptors in the glyph loader */ error = FT_GlyphLoader_CheckSubGlyphs( gloader, num_subglyphs ); if ( error ) goto Exit; FT_ARRAY_COPY( gloader->current.subglyphs, slot->subglyphs, num_subglyphs ); gloader->current.num_subglyphs = num_subglyphs; num_base_subgs = gloader->base.num_subglyphs; /* now read each subglyph independently */ for ( nn = 0; nn < num_subglyphs; nn++ ) { FT_Vector pp1, pp2; FT_Pos x, y; FT_UInt num_points, num_new_points, num_base_points; /* gloader.current.subglyphs can change during glyph loading due */ /* to re-allocation -- we must recompute the current subglyph on */ /* each iteration */ subglyph = gloader->base.subglyphs + num_base_subgs + nn; pp1 = loader->pp1; pp2 = loader->pp2; num_base_points = gloader->base.outline.n_points; error = af_loader_load_g( loader, scaler, subglyph->index, load_flags, depth + 1 ); if ( error ) goto Exit; /* recompute subglyph pointer */ subglyph = gloader->base.subglyphs + num_base_subgs + nn; if ( subglyph->flags & FT_SUBGLYPH_FLAG_USE_MY_METRICS ) { pp1 = loader->pp1; pp2 = loader->pp2; } else { loader->pp1 = pp1; loader->pp2 = pp2; } num_points = gloader->base.outline.n_points; num_new_points = num_points - num_base_points; /* now perform the transformation required for this subglyph */ if ( subglyph->flags & ( FT_SUBGLYPH_FLAG_SCALE | FT_SUBGLYPH_FLAG_XY_SCALE | FT_SUBGLYPH_FLAG_2X2 ) ) { FT_Vector* cur = gloader->base.outline.points + num_base_points; FT_Vector* limit = cur + num_new_points; for ( ; cur < limit; cur++ ) FT_Vector_Transform( cur, &subglyph->transform ); } /* apply offset */ if ( !( subglyph->flags & FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES ) ) { FT_Int k = subglyph->arg1; FT_UInt l = subglyph->arg2; FT_Vector* p1; FT_Vector* p2; if ( start_point + k >= num_base_points || l >= (FT_UInt)num_new_points ) { error = AF_Err_Invalid_Composite; goto Exit; } l += num_base_points; /* for now, only use the current point coordinates; */ /* we eventually may consider another approach */ p1 = gloader->base.outline.points + start_point + k; p2 = gloader->base.outline.points + start_point + l; x = p1->x - p2->x; y = p1->y - p2->y; } else { x = FT_MulFix( subglyph->arg1, hints->x_scale ) + hints->x_delta; y = FT_MulFix( subglyph->arg2, hints->y_scale ) + hints->y_delta; x = FT_PIX_ROUND( x ); y = FT_PIX_ROUND( y ); } { FT_Outline dummy = gloader->base.outline; dummy.points += num_base_points; dummy.n_points = (short)num_new_points; FT_Outline_Translate( &dummy, x, y ); } } } break; default: /* we don't support other formats (yet?) */ error = AF_Err_Unimplemented_Feature; } Hint_Metrics: if ( depth == 0 ) { FT_BBox bbox; FT_Vector vvector; vvector.x = slot->metrics.vertBearingX - slot->metrics.horiBearingX; vvector.y = slot->metrics.vertBearingY - slot->metrics.horiBearingY; vvector.x = FT_MulFix( vvector.x, metrics->scaler.x_scale ); vvector.y = FT_MulFix( vvector.y, metrics->scaler.y_scale ); /* transform the hinted outline if needed */ if ( loader->transformed ) { FT_Outline_Transform( &gloader->base.outline, &loader->trans_matrix ); FT_Vector_Transform( &vvector, &loader->trans_matrix ); } #if 1 /* we must translate our final outline by -pp1.x and compute */ /* the new metrics */ if ( loader->pp1.x ) FT_Outline_Translate( &gloader->base.outline, -loader->pp1.x, 0 ); #endif FT_Outline_Get_CBox( &gloader->base.outline, &bbox ); bbox.xMin = FT_PIX_FLOOR( bbox.xMin ); bbox.yMin = FT_PIX_FLOOR( bbox.yMin ); bbox.xMax = FT_PIX_CEIL( bbox.xMax ); bbox.yMax = FT_PIX_CEIL( bbox.yMax ); slot->metrics.width = bbox.xMax - bbox.xMin; slot->metrics.height = bbox.yMax - bbox.yMin; slot->metrics.horiBearingX = bbox.xMin; slot->metrics.horiBearingY = bbox.yMax; slot->metrics.vertBearingX = FT_PIX_FLOOR( bbox.xMin + vvector.x ); slot->metrics.vertBearingY = FT_PIX_FLOOR( bbox.yMax + vvector.y ); /* for mono-width fonts (like Andale, Courier, etc.) we need */ /* to keep the original rounded advance width; ditto for */ /* digits if all have the same advance width */ #if 0 if ( !FT_IS_FIXED_WIDTH( slot->face ) ) slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x; else slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance, x_scale ); #else if ( scaler->render_mode != FT_RENDER_MODE_LIGHT && ( FT_IS_FIXED_WIDTH( slot->face ) || ( af_face_globals_is_digit( loader->globals, glyph_index ) && metrics->digits_have_same_width ) ) ) { slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance, metrics->scaler.x_scale ); /* Set delta values to 0. Otherwise code that uses them is */ /* going to ruin the fixed advance width. */ slot->lsb_delta = 0; slot->rsb_delta = 0; } else { /* non-spacing glyphs must stay as-is */ if ( slot->metrics.horiAdvance ) slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x; } #endif slot->metrics.vertAdvance = FT_MulFix( slot->metrics.vertAdvance, metrics->scaler.y_scale ); slot->metrics.horiAdvance = FT_PIX_ROUND( slot->metrics.horiAdvance ); slot->metrics.vertAdvance = FT_PIX_ROUND( slot->metrics.vertAdvance ); /* now copy outline into glyph slot */ FT_GlyphLoader_Rewind( internal->loader ); error = FT_GlyphLoader_CopyPoints( internal->loader, gloader ); if ( error ) goto Exit; /* reassign all outline fields except flags to protect them */ slot->outline.n_contours = internal->loader->base.outline.n_contours; slot->outline.n_points = internal->loader->base.outline.n_points; slot->outline.points = internal->loader->base.outline.points; slot->outline.tags = internal->loader->base.outline.tags; slot->outline.contours = internal->loader->base.outline.contours; slot->format = FT_GLYPH_FORMAT_OUTLINE; } Exit: return error; }
/* convert a slot's glyph image into a bitmap */ static FT_Error ft_smooth_render_generic( FT_Renderer render, FT_GlyphSlot slot, FT_Render_Mode mode, const FT_Vector* origin, FT_Render_Mode required_mode ) { FT_Error error; FT_Outline* outline = NULL; FT_BBox cbox; FT_UInt width, height, height_org, width_org, pitch; FT_Bitmap* bitmap; FT_Memory memory; FT_Int hmul = mode == FT_RENDER_MODE_LCD; FT_Int vmul = mode == FT_RENDER_MODE_LCD_V; FT_Pos x_shift, y_shift, x_left, y_top; FT_Raster_Params params; /* check glyph image format */ if ( slot->format != render->glyph_format ) { error = Smooth_Err_Invalid_Argument; goto Exit; } /* check mode */ if ( mode != required_mode ) return Smooth_Err_Cannot_Render_Glyph; outline = &slot->outline; /* translate the outline to the new origin if needed */ if ( origin ) FT_Outline_Translate( outline, origin->x, origin->y ); /* compute the control box, and grid fit it */ FT_Outline_Get_CBox( outline, &cbox ); cbox.xMin = FT_PIX_FLOOR( cbox.xMin ); cbox.yMin = FT_PIX_FLOOR( cbox.yMin ); cbox.xMax = FT_PIX_CEIL( cbox.xMax ); cbox.yMax = FT_PIX_CEIL( cbox.yMax ); width = (FT_UInt)( ( cbox.xMax - cbox.xMin ) >> 6 ); height = (FT_UInt)( ( cbox.yMax - cbox.yMin ) >> 6 ); bitmap = &slot->bitmap; memory = render->root.memory; width_org = width; height_org = height; /* release old bitmap buffer */ if ( slot->internal->flags & FT_GLYPH_OWN_BITMAP ) { FT_FREE( bitmap->buffer ); slot->internal->flags &= ~FT_GLYPH_OWN_BITMAP; } /* allocate new one */ pitch = width; if ( hmul ) { width = width * 3; pitch = FT_PAD_CEIL( width, 4 ); } if ( vmul ) height *= 3; x_shift = (FT_Int) cbox.xMin; y_shift = (FT_Int) cbox.yMin; x_left = (FT_Int)( cbox.xMin >> 6 ); y_top = (FT_Int)( cbox.yMax >> 6 ); #ifdef FT_CONFIG_OPTION_SUBPIXEL_RENDERING if ( slot->library->lcd_filter_func ) { FT_Int extra = slot->library->lcd_extra; if ( hmul ) { x_shift -= 64 * ( extra >> 1 ); width += 3 * extra; pitch = FT_PAD_CEIL( width, 4 ); x_left -= extra >> 1; } if ( vmul ) { y_shift -= 64 * ( extra >> 1 ); height += 3 * extra; y_top += extra >> 1; } }
static FT_Error af_loader_load_g( AF_Loader loader, AF_Scaler scaler, FT_UInt glyph_index, FT_Int32 load_flags ) { AF_Module module = loader->globals->module; FT_Error error; FT_Face face = loader->face; AF_StyleMetrics metrics = loader->metrics; AF_GlyphHints hints = loader->hints; FT_GlyphSlot slot = face->glyph; FT_Slot_Internal internal = slot->internal; FT_GlyphLoader gloader = internal->loader; FT_Int32 flags; flags = load_flags | FT_LOAD_LINEAR_DESIGN; error = FT_Load_Glyph( face, glyph_index, flags ); if ( error ) goto Exit; /* * Apply stem darkening (emboldening) here before hints are applied to * the outline. Glyphs are scaled down proportionally to the * emboldening so that curve points don't fall outside their precomputed * blue zones. * * Any emboldening done by the font driver (e.g., the CFF driver) * doesn't reach here because the autohinter loads the unprocessed * glyphs in font units for analysis (functions `af_*_metrics_init_*') * and then above to prepare it for the rasterizers by itself, * independently of the font driver. So emboldening must be done here, * within the autohinter. * * All glyphs to be autohinted pass through here one by one. The * standard widths can therefore change from one glyph to the next, * depending on what script a glyph is assigned to (each script has its * own set of standard widths and other metrics). The darkening amount * must therefore be recomputed for each size and * `standard_{vertical,horizontal}_width' change. */ if ( !module->no_stem_darkening ) { AF_FaceGlobals globals = loader->globals; AF_WritingSystemClass writing_system_class; FT_Pos stdVW = 0; FT_Pos stdHW = 0; FT_Bool size_changed = face->size->metrics.x_ppem != globals->stem_darkening_for_ppem; FT_Fixed em_size = af_intToFixed( face->units_per_EM ); FT_Fixed em_ratio = FT_DivFix( af_intToFixed( 1000 ), em_size ); FT_Matrix scale_down_matrix = { 0x10000L, 0, 0, 0x10000L }; /* Skip stem darkening for broken fonts. */ if ( !face->units_per_EM ) goto After_Emboldening; /* * We depend on the writing system (script analyzers) to supply * standard widths for the script of the glyph we are looking at. If * it can't deliver, stem darkening is effectively disabled. */ writing_system_class = AF_WRITING_SYSTEM_CLASSES_GET[metrics->style_class->writing_system]; if ( writing_system_class->style_metrics_getstdw ) writing_system_class->style_metrics_getstdw( metrics, &stdHW, &stdVW ); else goto After_Emboldening; if ( size_changed || ( stdVW > 0 && stdVW != globals->standard_vertical_width ) ) { FT_Fixed darken_by_font_units_x, darken_x; darken_by_font_units_x = af_intToFixed( af_loader_compute_darkening( loader, face, stdVW ) ); darken_x = FT_DivFix( FT_MulFix( darken_by_font_units_x, face->size->metrics.x_scale ), em_ratio ); globals->standard_vertical_width = stdVW; globals->stem_darkening_for_ppem = face->size->metrics.x_ppem; globals->darken_x = af_fixedToInt( darken_x ); } if ( size_changed || ( stdHW > 0 && stdHW != globals->standard_horizontal_width ) ) { FT_Fixed darken_by_font_units_y, darken_y; darken_by_font_units_y = af_intToFixed( af_loader_compute_darkening( loader, face, stdHW ) ); darken_y = FT_DivFix( FT_MulFix( darken_by_font_units_y, face->size->metrics.y_scale ), em_ratio ); globals->standard_horizontal_width = stdHW; globals->stem_darkening_for_ppem = face->size->metrics.x_ppem; globals->darken_y = af_fixedToInt( darken_y ); /* * Scale outlines down on the Y-axis to keep them inside their blue * zones. The stronger the emboldening, the stronger the * downscaling (plus heuristical padding to prevent outlines still * falling out their zones due to rounding). * * Reason: `FT_Outline_Embolden' works by shifting the rightmost * points of stems farther to the right, and topmost points farther * up. This positions points on the Y-axis outside their * pre-computed blue zones and leads to distortion when applying the * hints in the code further below. Code outside this emboldening * block doesn't know we are presenting it with modified outlines * the analyzer didn't see! * * An unfortunate side effect of downscaling is that the emboldening * effect is slightly decreased. The loss becomes more pronounced * versus the CFF driver at smaller sizes, e.g., at 9ppem and below. */ globals->scale_down_factor = FT_DivFix( em_size - ( darken_by_font_units_y + af_intToFixed( 8 ) ), em_size ); } FT_Outline_EmboldenXY( &slot->outline, globals->darken_x, globals->darken_y ); scale_down_matrix.yy = globals->scale_down_factor; FT_Outline_Transform( &slot->outline, &scale_down_matrix ); } After_Emboldening: loader->transformed = internal->glyph_transformed; if ( loader->transformed ) { FT_Matrix inverse; loader->trans_matrix = internal->glyph_matrix; loader->trans_delta = internal->glyph_delta; inverse = loader->trans_matrix; if ( !FT_Matrix_Invert( &inverse ) ) FT_Vector_Transform( &loader->trans_delta, &inverse ); } switch ( slot->format ) { case FT_GLYPH_FORMAT_OUTLINE: /* translate the loaded glyph when an internal transform is needed */ if ( loader->transformed ) FT_Outline_Translate( &slot->outline, loader->trans_delta.x, loader->trans_delta.y ); /* compute original horizontal phantom points (and ignore */ /* vertical ones) */ loader->pp1.x = hints->x_delta; loader->pp1.y = hints->y_delta; loader->pp2.x = FT_MulFix( slot->metrics.horiAdvance, hints->x_scale ) + hints->x_delta; loader->pp2.y = hints->y_delta; /* be sure to check for spacing glyphs */ if ( slot->outline.n_points == 0 ) goto Hint_Metrics; /* now load the slot image into the auto-outline and run the */ /* automatic hinting process */ { #ifdef FT_CONFIG_OPTION_PIC AF_FaceGlobals globals = loader->globals; #endif AF_StyleClass style_class = metrics->style_class; AF_WritingSystemClass writing_system_class = AF_WRITING_SYSTEM_CLASSES_GET[style_class->writing_system]; if ( writing_system_class->style_hints_apply ) writing_system_class->style_hints_apply( glyph_index, hints, &gloader->base.outline, metrics ); } /* we now need to adjust the metrics according to the change in */ /* width/positioning that occurred during the hinting process */ if ( scaler->render_mode != FT_RENDER_MODE_LIGHT ) { FT_Pos old_rsb, old_lsb, new_lsb; FT_Pos pp1x_uh, pp2x_uh; AF_AxisHints axis = &hints->axis[AF_DIMENSION_HORZ]; AF_Edge edge1 = axis->edges; /* leftmost edge */ AF_Edge edge2 = edge1 + axis->num_edges - 1; /* rightmost edge */ if ( axis->num_edges > 1 && AF_HINTS_DO_ADVANCE( hints ) ) { old_rsb = loader->pp2.x - edge2->opos; old_lsb = edge1->opos; new_lsb = edge1->pos; /* remember unhinted values to later account */ /* for rounding errors */ pp1x_uh = new_lsb - old_lsb; pp2x_uh = edge2->pos + old_rsb; /* prefer too much space over too little space */ /* for very small sizes */ if ( old_lsb < 24 ) pp1x_uh -= 8; if ( old_rsb < 24 ) pp2x_uh += 8; loader->pp1.x = FT_PIX_ROUND( pp1x_uh ); loader->pp2.x = FT_PIX_ROUND( pp2x_uh ); if ( loader->pp1.x >= new_lsb && old_lsb > 0 ) loader->pp1.x -= 64; if ( loader->pp2.x <= edge2->pos && old_rsb > 0 ) loader->pp2.x += 64; slot->lsb_delta = loader->pp1.x - pp1x_uh; slot->rsb_delta = loader->pp2.x - pp2x_uh; } else { FT_Pos pp1x = loader->pp1.x; FT_Pos pp2x = loader->pp2.x; loader->pp1.x = FT_PIX_ROUND( pp1x ); loader->pp2.x = FT_PIX_ROUND( pp2x ); slot->lsb_delta = loader->pp1.x - pp1x; slot->rsb_delta = loader->pp2.x - pp2x; } } else { FT_Pos pp1x = loader->pp1.x; FT_Pos pp2x = loader->pp2.x; loader->pp1.x = FT_PIX_ROUND( pp1x + hints->xmin_delta ); loader->pp2.x = FT_PIX_ROUND( pp2x + hints->xmax_delta ); slot->lsb_delta = loader->pp1.x - pp1x; slot->rsb_delta = loader->pp2.x - pp2x; } break; default: /* we don't support other formats (yet?) */ error = FT_THROW( Unimplemented_Feature ); } Hint_Metrics: { FT_BBox bbox; FT_Vector vvector; vvector.x = slot->metrics.vertBearingX - slot->metrics.horiBearingX; vvector.y = slot->metrics.vertBearingY - slot->metrics.horiBearingY; vvector.x = FT_MulFix( vvector.x, metrics->scaler.x_scale ); vvector.y = FT_MulFix( vvector.y, metrics->scaler.y_scale ); /* transform the hinted outline if needed */ if ( loader->transformed ) { FT_Outline_Transform( &gloader->base.outline, &loader->trans_matrix ); FT_Vector_Transform( &vvector, &loader->trans_matrix ); } #if 1 /* we must translate our final outline by -pp1.x and compute */ /* the new metrics */ if ( loader->pp1.x ) FT_Outline_Translate( &gloader->base.outline, -loader->pp1.x, 0 ); #endif FT_Outline_Get_CBox( &gloader->base.outline, &bbox ); bbox.xMin = FT_PIX_FLOOR( bbox.xMin ); bbox.yMin = FT_PIX_FLOOR( bbox.yMin ); bbox.xMax = FT_PIX_CEIL( bbox.xMax ); bbox.yMax = FT_PIX_CEIL( bbox.yMax ); slot->metrics.width = bbox.xMax - bbox.xMin; slot->metrics.height = bbox.yMax - bbox.yMin; slot->metrics.horiBearingX = bbox.xMin; slot->metrics.horiBearingY = bbox.yMax; slot->metrics.vertBearingX = FT_PIX_FLOOR( bbox.xMin + vvector.x ); slot->metrics.vertBearingY = FT_PIX_FLOOR( bbox.yMax + vvector.y ); /* for mono-width fonts (like Andale, Courier, etc.) we need */ /* to keep the original rounded advance width; ditto for */ /* digits if all have the same advance width */ #if 0 if ( !FT_IS_FIXED_WIDTH( slot->face ) ) slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x; else slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance, x_scale ); #else if ( scaler->render_mode != FT_RENDER_MODE_LIGHT && ( FT_IS_FIXED_WIDTH( slot->face ) || ( af_face_globals_is_digit( loader->globals, glyph_index ) && metrics->digits_have_same_width ) ) ) { slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance, metrics->scaler.x_scale ); /* Set delta values to 0. Otherwise code that uses them is */ /* going to ruin the fixed advance width. */ slot->lsb_delta = 0; slot->rsb_delta = 0; } else { /* non-spacing glyphs must stay as-is */ if ( slot->metrics.horiAdvance ) slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x; } #endif slot->metrics.vertAdvance = FT_MulFix( slot->metrics.vertAdvance, metrics->scaler.y_scale ); slot->metrics.horiAdvance = FT_PIX_ROUND( slot->metrics.horiAdvance ); slot->metrics.vertAdvance = FT_PIX_ROUND( slot->metrics.vertAdvance ); #if 0 /* reassign all outline fields except flags to protect them */ slot->outline.n_contours = internal->loader->base.outline.n_contours; slot->outline.n_points = internal->loader->base.outline.n_points; slot->outline.points = internal->loader->base.outline.points; slot->outline.tags = internal->loader->base.outline.tags; slot->outline.contours = internal->loader->base.outline.contours; #endif slot->format = FT_GLYPH_FORMAT_OUTLINE; } Exit: return error; }
/* convert a slot's glyph image into a bitmap */ static FT_Error ft_smooth_render_generic( FT_Renderer render, FT_GlyphSlot slot, FT_Render_Mode mode, const FT_Vector* origin, FT_Render_Mode required_mode, FT_Int hmul, FT_Int vmul ) { FT_Error error; FT_Outline* outline = NULL; FT_BBox cbox; FT_UInt width, height, pitch; FT_Bitmap* bitmap; FT_Memory memory; FT_Raster_Params params; /* check glyph image format */ if ( slot->format != render->glyph_format ) { error = Smooth_Err_Invalid_Argument; goto Exit; } /* check mode */ if ( mode != required_mode ) return Smooth_Err_Cannot_Render_Glyph; outline = &slot->outline; /* translate the outline to the new origin if needed */ if ( origin ) FT_Outline_Translate( outline, origin->x, origin->y ); /* compute the control box, and grid fit it */ FT_Outline_Get_CBox( outline, &cbox ); cbox.xMin = FT_PIX_FLOOR( cbox.xMin ); cbox.yMin = FT_PIX_FLOOR( cbox.yMin ); cbox.xMax = FT_PIX_CEIL( cbox.xMax ); cbox.yMax = FT_PIX_CEIL( cbox.yMax ); width = (FT_UInt)( ( cbox.xMax - cbox.xMin ) >> 6 ); height = (FT_UInt)( ( cbox.yMax - cbox.yMin ) >> 6 ); bitmap = &slot->bitmap; memory = render->root.memory; /* release old bitmap buffer */ if ( slot->internal->flags & FT_GLYPH_OWN_BITMAP ) { FT_FREE( bitmap->buffer ); slot->internal->flags &= ~FT_GLYPH_OWN_BITMAP; } /* allocate new one, depends on pixel format */ pitch = width; if ( hmul ) { width = width * hmul; pitch = FT_PAD_CEIL( width, 4 ); } if ( vmul ) height *= vmul; bitmap->pixel_mode = FT_PIXEL_MODE_GRAY; bitmap->num_grays = 256; bitmap->width = width; bitmap->rows = height; bitmap->pitch = pitch; if ( FT_ALLOC( bitmap->buffer, (FT_ULong)pitch * height ) ) goto Exit; slot->internal->flags |= FT_GLYPH_OWN_BITMAP; /* translate outline to render it into the bitmap */ FT_Outline_Translate( outline, -cbox.xMin, -cbox.yMin ); /* set up parameters */ params.target = bitmap; params.source = outline; params.flags = FT_RASTER_FLAG_AA; /* implode outline if needed */ { FT_Int n; FT_Vector* vec; if ( hmul ) for ( vec = outline->points, n = 0; n < outline->n_points; n++, vec++ ) vec->x *= hmul; if ( vmul ) for ( vec = outline->points, n = 0; n < outline->n_points; n++, vec++ ) vec->y *= vmul; } /* render outline into the bitmap */ error = render->raster_render( render->raster, ¶ms ); /* deflate outline if needed */ { FT_Int n; FT_Vector* vec; if ( hmul ) for ( vec = outline->points, n = 0; n < outline->n_points; n++, vec++ ) vec->x /= hmul; if ( vmul ) for ( vec = outline->points, n = 0; n < outline->n_points; n++, vec++ ) vec->y /= vmul; } FT_Outline_Translate( outline, cbox.xMin, cbox.yMin ); if ( error ) goto Exit; slot->format = FT_GLYPH_FORMAT_BITMAP; slot->bitmap_left = (FT_Int)( cbox.xMin >> 6 ); slot->bitmap_top = (FT_Int)( cbox.yMax >> 6 ); Exit: if ( outline && origin ) FT_Outline_Translate( outline, -origin->x, -origin->y ); return error; }
static FT_Error af_loader_load_g( AF_Loader loader, AF_Scaler scaler, FT_UInt glyph_index, FT_Int32 load_flags ) { FT_Error error; FT_Face face = loader->face; AF_StyleMetrics metrics = loader->metrics; AF_GlyphHints hints = loader->hints; FT_GlyphSlot slot = face->glyph; FT_Slot_Internal internal = slot->internal; FT_GlyphLoader gloader = internal->loader; FT_Int32 flags; flags = load_flags | FT_LOAD_LINEAR_DESIGN; error = FT_Load_Glyph( face, glyph_index, flags ); if ( error ) goto Exit; loader->transformed = internal->glyph_transformed; if ( loader->transformed ) { FT_Matrix inverse; loader->trans_matrix = internal->glyph_matrix; loader->trans_delta = internal->glyph_delta; inverse = loader->trans_matrix; if ( !FT_Matrix_Invert( &inverse ) ) FT_Vector_Transform( &loader->trans_delta, &inverse ); } switch ( slot->format ) { case FT_GLYPH_FORMAT_OUTLINE: /* translate the loaded glyph when an internal transform is needed */ if ( loader->transformed ) FT_Outline_Translate( &slot->outline, loader->trans_delta.x, loader->trans_delta.y ); /* compute original horizontal phantom points (and ignore */ /* vertical ones) */ loader->pp1.x = hints->x_delta; loader->pp1.y = hints->y_delta; loader->pp2.x = FT_MulFix( slot->metrics.horiAdvance, hints->x_scale ) + hints->x_delta; loader->pp2.y = hints->y_delta; /* be sure to check for spacing glyphs */ if ( slot->outline.n_points == 0 ) goto Hint_Metrics; /* now load the slot image into the auto-outline and run the */ /* automatic hinting process */ { #ifdef FT_CONFIG_OPTION_PIC AF_FaceGlobals globals = loader->globals; #endif AF_StyleClass style_class = metrics->style_class; AF_WritingSystemClass writing_system_class = AF_WRITING_SYSTEM_CLASSES_GET[style_class->writing_system]; if ( writing_system_class->style_hints_apply ) writing_system_class->style_hints_apply( hints, &gloader->base.outline, metrics ); } /* we now need to adjust the metrics according to the change in */ /* width/positioning that occurred during the hinting process */ if ( scaler->render_mode != FT_RENDER_MODE_LIGHT ) { FT_Pos old_rsb, old_lsb, new_lsb; FT_Pos pp1x_uh, pp2x_uh; AF_AxisHints axis = &hints->axis[AF_DIMENSION_HORZ]; AF_Edge edge1 = axis->edges; /* leftmost edge */ AF_Edge edge2 = edge1 + axis->num_edges - 1; /* rightmost edge */ if ( axis->num_edges > 1 && AF_HINTS_DO_ADVANCE( hints ) ) { old_rsb = loader->pp2.x - edge2->opos; old_lsb = edge1->opos; new_lsb = edge1->pos; /* remember unhinted values to later account */ /* for rounding errors */ pp1x_uh = new_lsb - old_lsb; pp2x_uh = edge2->pos + old_rsb; /* prefer too much space over too little space */ /* for very small sizes */ if ( old_lsb < 24 ) pp1x_uh -= 8; if ( old_rsb < 24 ) pp2x_uh += 8; loader->pp1.x = FT_PIX_ROUND( pp1x_uh ); loader->pp2.x = FT_PIX_ROUND( pp2x_uh ); if ( loader->pp1.x >= new_lsb && old_lsb > 0 ) loader->pp1.x -= 64; if ( loader->pp2.x <= edge2->pos && old_rsb > 0 ) loader->pp2.x += 64; slot->lsb_delta = loader->pp1.x - pp1x_uh; slot->rsb_delta = loader->pp2.x - pp2x_uh; } else { FT_Pos pp1x = loader->pp1.x; FT_Pos pp2x = loader->pp2.x; loader->pp1.x = FT_PIX_ROUND( pp1x ); loader->pp2.x = FT_PIX_ROUND( pp2x ); slot->lsb_delta = loader->pp1.x - pp1x; slot->rsb_delta = loader->pp2.x - pp2x; } } else { FT_Pos pp1x = loader->pp1.x; FT_Pos pp2x = loader->pp2.x; loader->pp1.x = FT_PIX_ROUND( pp1x + hints->xmin_delta ); loader->pp2.x = FT_PIX_ROUND( pp2x + hints->xmax_delta ); slot->lsb_delta = loader->pp1.x - pp1x; slot->rsb_delta = loader->pp2.x - pp2x; } break; default: /* we don't support other formats (yet?) */ error = FT_THROW( Unimplemented_Feature ); } Hint_Metrics: { FT_BBox bbox; FT_Vector vvector; vvector.x = slot->metrics.vertBearingX - slot->metrics.horiBearingX; vvector.y = slot->metrics.vertBearingY - slot->metrics.horiBearingY; vvector.x = FT_MulFix( vvector.x, metrics->scaler.x_scale ); vvector.y = FT_MulFix( vvector.y, metrics->scaler.y_scale ); /* transform the hinted outline if needed */ if ( loader->transformed ) { FT_Outline_Transform( &gloader->base.outline, &loader->trans_matrix ); FT_Vector_Transform( &vvector, &loader->trans_matrix ); } #if 1 /* we must translate our final outline by -pp1.x and compute */ /* the new metrics */ if ( loader->pp1.x ) FT_Outline_Translate( &gloader->base.outline, -loader->pp1.x, 0 ); #endif FT_Outline_Get_CBox( &gloader->base.outline, &bbox ); bbox.xMin = FT_PIX_FLOOR( bbox.xMin ); bbox.yMin = FT_PIX_FLOOR( bbox.yMin ); bbox.xMax = FT_PIX_CEIL( bbox.xMax ); bbox.yMax = FT_PIX_CEIL( bbox.yMax ); slot->metrics.width = bbox.xMax - bbox.xMin; slot->metrics.height = bbox.yMax - bbox.yMin; slot->metrics.horiBearingX = bbox.xMin; slot->metrics.horiBearingY = bbox.yMax; slot->metrics.vertBearingX = FT_PIX_FLOOR( bbox.xMin + vvector.x ); slot->metrics.vertBearingY = FT_PIX_FLOOR( bbox.yMax + vvector.y ); /* for mono-width fonts (like Andale, Courier, etc.) we need */ /* to keep the original rounded advance width; ditto for */ /* digits if all have the same advance width */ #if 0 if ( !FT_IS_FIXED_WIDTH( slot->face ) ) slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x; else slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance, x_scale ); #else if ( scaler->render_mode != FT_RENDER_MODE_LIGHT && ( FT_IS_FIXED_WIDTH( slot->face ) || ( af_face_globals_is_digit( loader->globals, glyph_index ) && metrics->digits_have_same_width ) ) ) { slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance, metrics->scaler.x_scale ); /* Set delta values to 0. Otherwise code that uses them is */ /* going to ruin the fixed advance width. */ slot->lsb_delta = 0; slot->rsb_delta = 0; } else { /* non-spacing glyphs must stay as-is */ if ( slot->metrics.horiAdvance ) slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x; } #endif slot->metrics.vertAdvance = FT_MulFix( slot->metrics.vertAdvance, metrics->scaler.y_scale ); slot->metrics.horiAdvance = FT_PIX_ROUND( slot->metrics.horiAdvance ); slot->metrics.vertAdvance = FT_PIX_ROUND( slot->metrics.vertAdvance ); #if 0 /* reassign all outline fields except flags to protect them */ slot->outline.n_contours = internal->loader->base.outline.n_contours; slot->outline.n_points = internal->loader->base.outline.n_points; slot->outline.points = internal->loader->base.outline.points; slot->outline.tags = internal->loader->base.outline.tags; slot->outline.contours = internal->loader->base.outline.contours; #endif slot->format = FT_GLYPH_FORMAT_OUTLINE; } Exit: return error; }
static FT_Error af_loader_load_g( AF_Loader loader, AF_Scaler scaler, FT_UInt glyph_index, FT_Int32 load_flags, FT_UInt depth ) { FT_Error error = 0; FT_Face face = loader->face; FT_GlyphLoader gloader = loader->gloader; AF_ScriptMetrics metrics = loader->metrics; AF_GlyphHints hints = &loader->hints; FT_GlyphSlot slot = face->glyph; FT_Slot_Internal internal = slot->internal; error = FT_Load_Glyph( face, glyph_index, load_flags ); if ( error ) goto Exit; loader->transformed = internal->glyph_transformed; if ( loader->transformed ) { FT_Matrix inverse; loader->trans_matrix = internal->glyph_matrix; loader->trans_delta = internal->glyph_delta; inverse = loader->trans_matrix; FT_Matrix_Invert( &inverse ); FT_Vector_Transform( &loader->trans_delta, &inverse ); } /* set linear metrics */ slot->linearHoriAdvance = slot->metrics.horiAdvance; slot->linearVertAdvance = slot->metrics.vertAdvance; switch ( slot->format ) { case FT_GLYPH_FORMAT_OUTLINE: /* translate the loaded glyph when an internal transform * is needed */ if ( loader->transformed ) FT_Outline_Translate( &slot->outline, loader->trans_delta.x, loader->trans_delta.y ); /* copy the outline points in the loader's current */ /* extra points which is used to keep original glyph coordinates */ error = FT_GlyphLoader_CheckPoints( gloader, slot->outline.n_points + 4, slot->outline.n_contours ); if ( error ) goto Exit; FT_ARRAY_COPY( gloader->current.outline.points, slot->outline.points, slot->outline.n_points ); FT_ARRAY_COPY( gloader->current.extra_points, slot->outline.points, slot->outline.n_points ); FT_ARRAY_COPY( gloader->current.outline.contours, slot->outline.contours, slot->outline.n_contours ); FT_ARRAY_COPY( gloader->current.outline.tags, slot->outline.tags, slot->outline.n_points ); gloader->current.outline.n_points = slot->outline.n_points; gloader->current.outline.n_contours = slot->outline.n_contours; /* compute original horizontal phantom points (and ignore */ /* vertical ones) */ loader->pp1.x = hints->x_delta; loader->pp1.y = hints->y_delta; loader->pp2.x = FT_MulFix( slot->metrics.horiAdvance, hints->x_scale ) + hints->x_delta; loader->pp2.y = hints->y_delta; /* be sure to check for spacing glyphs */ if ( slot->outline.n_points == 0 ) goto Hint_Metrics; /* now load the slot image into the auto-outline and run the */ /* automatic hinting process */ metrics->clazz->script_hints_apply( hints, &gloader->current.outline, metrics ); /* we now need to hint the metrics according to the change in */ /* width/positioning that occured during the hinting process */ { FT_Pos old_advance, old_rsb, old_lsb, new_lsb; FT_Pos pp1x_uh, pp2x_uh; AF_AxisHints axis = &hints->axis[ AF_DIMENSION_HORZ ]; AF_Edge edge1 = axis->edges; /* leftmost edge */ AF_Edge edge2 = edge1 + axis->num_edges - 1; /* rightmost edge */ if ( edge2 > edge1 ) { old_advance = loader->pp2.x; old_rsb = old_advance - edge2->opos; old_lsb = edge1->opos; new_lsb = edge1->pos; /* remember unhinted values to later account */ /* for rounding errors */ pp1x_uh = new_lsb - old_lsb; pp2x_uh = edge2->pos + old_rsb; /* prefer too much space over too little space */ /* for very small sizes */ if ( old_lsb < 24 ) pp1x_uh -= 5; if ( old_rsb < 24 ) pp2x_uh += 5; loader->pp1.x = FT_PIX_ROUND( pp1x_uh ); loader->pp2.x = FT_PIX_ROUND( pp2x_uh ); slot->lsb_delta = loader->pp1.x - pp1x_uh; slot->rsb_delta = loader->pp2.x - pp2x_uh; #if 0 /* try to fix certain bad advance computations */ if ( loader->pp2.x + loader->pp1.x == edge2->pos && old_rsb > 4 ) loader->pp2.x += 64; #endif } else { loader->pp1.x = FT_PIX_ROUND( loader->pp1.x ); loader->pp2.x = FT_PIX_ROUND( loader->pp2.x ); } } /* good, we simply add the glyph to our loader's base */ FT_GlyphLoader_Add( gloader ); break; case FT_GLYPH_FORMAT_COMPOSITE: { FT_UInt nn, num_subglyphs = slot->num_subglyphs; FT_UInt num_base_subgs, start_point; FT_SubGlyph subglyph; start_point = gloader->base.outline.n_points; /* first of all, copy the subglyph descriptors in the glyph loader */ error = FT_GlyphLoader_CheckSubGlyphs( gloader, num_subglyphs ); if ( error ) goto Exit; FT_ARRAY_COPY( gloader->current.subglyphs, slot->subglyphs, num_subglyphs ); gloader->current.num_subglyphs = num_subglyphs; num_base_subgs = gloader->base.num_subglyphs; /* now, read each subglyph independently */ for ( nn = 0; nn < num_subglyphs; nn++ ) { FT_Vector pp1, pp2; FT_Pos x, y; FT_UInt num_points, num_new_points, num_base_points; /* gloader.current.subglyphs can change during glyph loading due */ /* to re-allocation -- we must recompute the current subglyph on */ /* each iteration */ subglyph = gloader->base.subglyphs + num_base_subgs + nn; pp1 = loader->pp1; pp2 = loader->pp2; num_base_points = gloader->base.outline.n_points; error = af_loader_load_g( loader, scaler, subglyph->index, load_flags, depth + 1 ); if ( error ) goto Exit; /* recompute subglyph pointer */ subglyph = gloader->base.subglyphs + num_base_subgs + nn; if ( subglyph->flags & FT_SUBGLYPH_FLAG_USE_MY_METRICS ) { pp1 = loader->pp1; pp2 = loader->pp2; } else { loader->pp1 = pp1; loader->pp2 = pp2; } num_points = gloader->base.outline.n_points; num_new_points = num_points - num_base_points; /* now perform the transform required for this subglyph */ if ( subglyph->flags & ( FT_SUBGLYPH_FLAG_SCALE | FT_SUBGLYPH_FLAG_XY_SCALE | FT_SUBGLYPH_FLAG_2X2 ) ) { FT_Vector* cur = gloader->base.outline.points + num_base_points; FT_Vector* org = gloader->base.extra_points + num_base_points; FT_Vector* limit = cur + num_new_points; for ( ; cur < limit; cur++, org++ ) { FT_Vector_Transform( cur, &subglyph->transform ); FT_Vector_Transform( org, &subglyph->transform ); } } /* apply offset */ if ( !( subglyph->flags & FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES ) ) { FT_Int k = subglyph->arg1; FT_UInt l = subglyph->arg2; FT_Vector* p1; FT_Vector* p2; if ( start_point + k >= num_base_points || l >= (FT_UInt)num_new_points ) { error = FT_Err_Invalid_Composite; goto Exit; } l += num_base_points; /* for now, only use the current point coordinates; */ /* we may consider another approach in the near future */ p1 = gloader->base.outline.points + start_point + k; p2 = gloader->base.outline.points + start_point + l; x = p1->x - p2->x; y = p1->y - p2->y; } else { x = FT_MulFix( subglyph->arg1, hints->x_scale ) + hints->x_delta; y = FT_MulFix( subglyph->arg2, hints->y_scale ) + hints->y_delta; x = FT_PIX_ROUND(x); y = FT_PIX_ROUND(y); } { FT_Outline dummy = gloader->base.outline; dummy.points += num_base_points; dummy.n_points = (short)num_new_points; FT_Outline_Translate( &dummy, x, y ); } } } break; default: /* we don't support other formats (yet?) */ error = FT_Err_Unimplemented_Feature; } Hint_Metrics: if ( depth == 0 ) { FT_BBox bbox; /* transform the hinted outline if needed */ if ( loader->transformed ) FT_Outline_Transform( &gloader->base.outline, &loader->trans_matrix ); /* we must translate our final outline by -pp1.x and compute */ /* the new metrics */ if ( loader->pp1.x ) FT_Outline_Translate( &gloader->base.outline, -loader->pp1.x, 0 ); FT_Outline_Get_CBox( &gloader->base.outline, &bbox ); bbox.xMin = FT_PIX_FLOOR( bbox.xMin ); bbox.yMin = FT_PIX_FLOOR( bbox.yMin ); bbox.xMax = FT_PIX_CEIL( bbox.xMax ); bbox.yMax = FT_PIX_CEIL( bbox.yMax ); slot->metrics.width = bbox.xMax - bbox.xMin; slot->metrics.height = bbox.yMax - bbox.yMin; slot->metrics.horiBearingX = bbox.xMin; slot->metrics.horiBearingY = bbox.yMax; /* for mono-width fonts (like Andale, Courier, etc.) we need */ /* to keep the original rounded advance width */ #if 0 if ( !FT_IS_FIXED_WIDTH( slot->face ) ) slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x; else slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance, x_scale ); #else /* for mono-width fonts (like Andale, Courier, etc.) we need */ /* to keep the original rounded advance width */ if ( !FT_IS_FIXED_WIDTH( slot->face ) ) slot->metrics.horiAdvance = loader->pp2.x - loader->pp1.x; else slot->metrics.horiAdvance = FT_MulFix( slot->metrics.horiAdvance, metrics->scaler.x_scale ); #endif slot->metrics.horiAdvance = FT_PIX_ROUND( slot->metrics.horiAdvance ); /* now copy outline into glyph slot */ FT_GlyphLoader_Rewind( internal->loader ); error = FT_GlyphLoader_CopyPoints( internal->loader, gloader ); if ( error ) goto Exit; slot->outline = internal->loader->base.outline; slot->format = FT_GLYPH_FORMAT_OUTLINE; } #ifdef DEBUG_HINTER af_debug_hinter = hinter; #endif Exit: return error; }
/* convert a slot's glyph image into a bitmap */ static FT_Error ft_raster1_render( FT_Renderer render, FT_GlyphSlot slot, FT_Render_Mode mode, const FT_Vector* origin ) { FT_Error error; FT_Outline* outline; FT_BBox cbox, cbox0; FT_UInt width, height, pitch; FT_Bitmap* bitmap; FT_Memory memory; FT_Raster_Params params; /* check glyph image format */ if ( slot->format != render->glyph_format ) { error = FT_THROW( Invalid_Argument ); goto Exit; } /* check rendering mode */ if ( mode != FT_RENDER_MODE_MONO ) { /* raster1 is only capable of producing monochrome bitmaps */ return FT_THROW( Cannot_Render_Glyph ); } outline = &slot->outline; /* translate the outline to the new origin if needed */ if ( origin ) FT_Outline_Translate( outline, origin->x, origin->y ); /* compute the control box, and grid fit it */ FT_Outline_Get_CBox( outline, &cbox0 ); /* undocumented but confirmed: bbox values get rounded */ #if 1 cbox.xMin = FT_PIX_ROUND( cbox0.xMin ); cbox.yMin = FT_PIX_ROUND( cbox0.yMin ); cbox.xMax = FT_PIX_ROUND( cbox0.xMax ); cbox.yMax = FT_PIX_ROUND( cbox0.yMax ); #else cbox.xMin = FT_PIX_FLOOR( cbox.xMin ); cbox.yMin = FT_PIX_FLOOR( cbox.yMin ); cbox.xMax = FT_PIX_CEIL( cbox.xMax ); cbox.yMax = FT_PIX_CEIL( cbox.yMax ); #endif /* If either `width' or `height' round to 0, try */ /* explicitly rounding up/down. In the case of */ /* glyphs containing only one very narrow feature, */ /* this gives the drop-out compensation in the scan */ /* conversion code a chance to do its stuff. */ width = (FT_UInt)( ( cbox.xMax - cbox.xMin ) >> 6 ); if ( width == 0 ) { cbox.xMin = FT_PIX_FLOOR( cbox0.xMin ); cbox.xMax = FT_PIX_CEIL( cbox0.xMax ); width = (FT_UInt)( ( cbox.xMax - cbox.xMin ) >> 6 ); }