Beispiel #1
0
void addFontsToEnvironment()
{
    FcInit();

    // Load our configuration file, which sets up proper aliases for family
    // names like sans, serif and monospace.
    FcConfig* config = FcConfigCreate();
    const char* fontConfigFilename = FONTS_CONF_DIR "/fonts.conf";
    if (!FcConfigParseAndLoad(config, reinterpret_cast<const FcChar8*>(fontConfigFilename), true)) {
        fprintf(stderr, "Couldn't load font configuration file from: %s\n", fontConfigFilename);
        exit(1);
    }

    if (!addFontDirectory(DOWNLOADED_FONTS_DIR, config)) {
        fprintf(stderr, "None of the font directories could be added. Either install them "
                        "or file a bug at http://bugs.webkit.org if they are installed in "
                        "another location.\n");
        exit(1);
    }

    addFontFiles(getFontFiles(), config);

    if (!FcConfigSetCurrent(config)) {
        fprintf(stderr, "Could not set the current font configuration!\n");
        exit(1);
    }
}
static AliasStrength strengthOfFirstAlias(const FcPattern& original)
{
    // Ideally there would exist a call like
    // FcResult FcPatternIsWeak(pattern, object, id, FcBool* isWeak);
    //
    // However, there is no such call and as of Fc 2.11.0 even FcPatternEquals ignores the weak bit.
    // Currently, the only reliable way of finding the weak bit is by its effect on matching.
    // The weak bit only affects the matching of FC_FAMILY and FC_POSTSCRIPT_NAME object values.
    // A element with the weak bit is scored after FC_LANG, without the weak bit is scored before.
    // Note that the weak bit is stored on the element, not on the value it holds.
    FcValue value;
    FcResult result = FcPatternGet(&original, FC_FAMILY, 0, &value);
    if (result != FcResultMatch)
        return AliasStrength::Done;

    RefPtr<FcPattern> pattern = adoptRef(FcPatternDuplicate(&original));
    FcBool hasMultipleFamilies = true;
    while (hasMultipleFamilies)
        hasMultipleFamilies = FcPatternRemove(pattern.get(), FC_FAMILY, 1);

    // Create a font set with two patterns.
    // 1. the same FC_FAMILY as pattern and a lang object with only 'nomatchlang'.
    // 2. a different FC_FAMILY from pattern and a lang object with only 'matchlang'.
    FcUniquePtr<FcFontSet> fontSet(FcFontSetCreate());

    FcUniquePtr<FcLangSet> strongLangSet(FcLangSetCreate());
    FcLangSetAdd(strongLangSet.get(), reinterpret_cast<const FcChar8*>("nomatchlang"));
    // Ownership of this FcPattern will be transferred with FcFontSetAdd.
    FcPattern* strong = FcPatternDuplicate(pattern.get());
    FcPatternAddLangSet(strong, FC_LANG, strongLangSet.get());

    FcUniquePtr<FcLangSet> weakLangSet(FcLangSetCreate());
    FcLangSetAdd(weakLangSet.get(), reinterpret_cast<const FcChar8*>("matchlang"));
    // Ownership of this FcPattern will be transferred via FcFontSetAdd.
    FcPattern* weak = FcPatternCreate();
    FcPatternAddString(weak, FC_FAMILY, reinterpret_cast<const FcChar8*>("nomatchstring"));
    FcPatternAddLangSet(weak, FC_LANG, weakLangSet.get());

    FcFontSetAdd(fontSet.get(), strong);
    FcFontSetAdd(fontSet.get(), weak);

    // Add 'matchlang' to the copy of the pattern.
    FcPatternAddLangSet(pattern.get(), FC_LANG, weakLangSet.get());

    // Run a match against the copy of the pattern.
    // If the first element was weak, then we should match the pattern with 'matchlang'.
    // If the first element was strong, then we should match the pattern with 'nomatchlang'.

    // Note that this config is only used for FcFontRenderPrepare, which we don't even want.
    // However, there appears to be no way to match/sort without it.
    RefPtr<FcConfig> config = adoptRef(FcConfigCreate());
    FcFontSet* fontSets[1] = { fontSet.get() };
    RefPtr<FcPattern> match = adoptRef(FcFontSetMatch(config.get(), fontSets, 1, pattern.get(), &result));

    FcLangSet* matchLangSet;
    FcPatternGetLangSet(match.get(), FC_LANG, 0, &matchLangSet);
    return FcLangEqual == FcLangSetHasLang(matchLangSet, reinterpret_cast<const FcChar8*>("matchlang"))
        ? AliasStrength::Weak : AliasStrength::Strong;
}
Beispiel #3
0
/*
 * Load the configuration files
 */
FcConfig *
FcInitLoadOwnConfig (FcConfig *config)
{
    if (!config)
    {
	config = FcConfigCreate ();
	if (!config)
	    return NULL;
    }

    FcInitDebug ();

    if (!FcConfigParseAndLoad (config, 0, FcTrue))
    {
	FcConfigDestroy (config);
	return FcInitFallbackConfig ();
    }

    if (config->cacheDirs && config->cacheDirs->num == 0)
    {
	FcChar8 *prefix, *p;
	size_t plen;

	fprintf (stderr,
		 "Fontconfig warning: no <cachedir> elements found. Check configuration.\n");
	fprintf (stderr,
		 "Fontconfig warning: adding <cachedir>%s</cachedir>\n",
		 FC_CACHEDIR);
	prefix = FcConfigXdgCacheHome ();
	if (!prefix)
	    goto bail;
	plen = strlen ((const char *)prefix);
	p = realloc (prefix, plen + 12);
	if (!p)
	    goto bail;
	prefix = p;
	memcpy (&prefix[plen], FC_DIR_SEPARATOR_S "fontconfig", 11);
	prefix[plen + 11] = 0;
	fprintf (stderr,
		 "Fontconfig warning: adding <cachedir prefix=\"xdg\">fontconfig</cachedir>\n");

	if (!FcConfigAddCacheDir (config, (FcChar8 *) FC_CACHEDIR) ||
	    !FcConfigAddCacheDir (config, (FcChar8 *) prefix))
	{
	  bail:
	    fprintf (stderr,
		     "Fontconfig error: out of memory");
	    if (prefix)
		FcStrFree (prefix);
	    FcConfigDestroy (config);
	    return FcInitFallbackConfig ();
	}
	FcStrFree (prefix);
    }

    return config;
}
Beispiel #4
0
/**
 * \brief Init fontconfig.
 * \param library libass library object
 * \param ftlibrary freetype library object
 * \param family default font family
 * \param path default font path
 * \param fc whether fontconfig should be used
 * \param config path to a fontconfig configuration file, or NULL
 * \param update whether the fontconfig cache should be built/updated
 * \return pointer to fontconfig private data
*/
FCInstance *fontconfig_init(ASS_Library *library,
                            FT_Library ftlibrary, const char *family,
                            const char *path, int fc, const char *config,
                            int update)
{
    int rc;
    FCInstance *priv = calloc(1, sizeof(FCInstance));
    const char *dir = library->fonts_dir;
    int i;

    if (!fc) {
        ass_msg(library, MSGL_WARN,
               "Fontconfig disabled, only default font will be used.");
        goto exit;
    }

    priv->config = FcConfigCreate();
    rc = FcConfigParseAndLoad(priv->config, (unsigned char *) config, FcTrue);
    if (!rc) {
        ass_msg(library, MSGL_WARN, "No usable fontconfig configuration "
                "file found, using fallback.");
        FcConfigDestroy(priv->config);
        priv->config = FcInitLoadConfig();
        rc++;
    }
    if (rc && update) {
        FcConfigBuildFonts(priv->config);
    }

    if (!rc || !priv->config) {
        ass_msg(library, MSGL_FATAL,
                "No valid fontconfig configuration found!");
        FcConfigDestroy(priv->config);
        goto exit;
    }

    for (i = 0; i < library->num_fontdata; ++i)
        process_fontdata(priv, library, ftlibrary, i);

    if (dir) {
        ass_msg(library, MSGL_V, "Updating font cache");

        rc = FcConfigAppFontAddDir(priv->config, (const FcChar8 *) dir);
        if (!rc) {
            ass_msg(library, MSGL_WARN, "%s failed", "FcConfigAppFontAddDir");
        }
    }

    priv->family_default = family ? strdup(family) : NULL;
exit:
    priv->path_default = path ? strdup(path) : NULL;
    priv->index_default = 0;

    return priv;
}
Beispiel #5
0
// coverity[+alloc : arg-*0]
GpStatus
GdipNewPrivateFontCollection (GpFontCollection **font_collection)
{
    GpFontCollection *result;

    if (!font_collection)
        return InvalidParameter;

    result = (GpFontCollection *) GdipAlloc (sizeof (GpFontCollection));
    if (result) {
        result->fontset = NULL;
        result->config = FcConfigCreate ();
    }
    *font_collection = result;
    return Ok;
}
Beispiel #6
0
static int
Py_Config_init(Py_Config *self, PyObject *args, PyObject *kwds)
{
    if (!PyArg_ParseTuple(args, ":Config")) {
        return -1;
    }

    self->x = FcConfigCreate();

    if (self->x == NULL) {
        PyErr_SetString(
            PyExc_RuntimeError, "Could not create config");
        return -1;
    }

    return 0;
}
Beispiel #7
0
static FcConfig *
FcInitFallbackConfig (void)
{
    FcConfig	*config;

    config = FcConfigCreate ();
    if (!config)
	goto bail0;
    if (!FcConfigAddDir (config, (FcChar8 *) FC_DEFAULT_FONTS))
	goto bail1;
    if (!FcConfigAddCacheDir (config, (FcChar8 *) FC_CACHEDIR))
	goto bail1;
    return config;

bail1:
    FcConfigDestroy (config);
bail0:
    return 0;
}
void QtTestSupport::initializeTestFonts()
{
    QFontDatabase::removeAllApplicationFonts();
#if HAVE(FONTCONFIG)
    static int numFonts = -1;

    FcInit();

    // Some test cases may add or remove application fonts (via @font-face).
    // Make sure to re-initialize the font set if necessary.
    FcFontSet* appFontSet = FcConfigGetFonts(0, FcSetApplication);
    if (appFontSet && numFonts >= 0 && appFontSet->nfont == numFonts)
        return;

    QByteArray fontDir = getenv("WEBKIT_TESTFONTS");
    if (fontDir.isEmpty() || !QDir(QString::fromLatin1(fontDir)).exists()) {
        qFatal("\n\n"
            "----------------------------------------------------------------------\n"
            "WEBKIT_TESTFONTS environment variable is not set correctly.\n"
            "This variable has to point to the directory containing the fonts\n"
            "you can clone from git://gitorious.org/qtwebkit/testfonts.git\n"
            "----------------------------------------------------------------------\n"
            );
    }

    QByteArray configFile = fontDir + "/fonts.conf";
    FcConfig* config = FcConfigCreate();
    if (!FcConfigParseAndLoad(config, reinterpret_cast<const FcChar8*>(configFile.constData()), FcTrue))
        qFatal("Couldn't load font configuration file");
    if (!FcConfigAppFontAddDir(config, reinterpret_cast<const FcChar8*>(fontDir.data())))
        qFatal("Couldn't add font dir!");
    FcConfigSetCurrent(config);

    appFontSet = FcConfigGetFonts(config, FcSetApplication);
    numFonts = appFontSet->nfont;

    WebCore::fontCache()->invalidate();
#endif
}
void activateFonts()
{
#if defined(Q_WS_X11)
    static int numFonts = -1;

    // Some test cases may add or remove application fonts (via @font-face).
    // Make sure to re-initialize the font set if necessary.
    FcFontSet* appFontSet = FcConfigGetFonts(0, FcSetApplication);
    if (appFontSet && numFonts >= 0 && appFontSet->nfont == numFonts)
        return;

    QByteArray fontDir = getenv("WEBKIT_TESTFONTS");
    if (fontDir.isEmpty() || !QDir(fontDir).exists()) {
        fprintf(stderr,
                "\n\n"
                "----------------------------------------------------------------------\n"
                "WEBKIT_TESTFONTS environment variable is not set correctly.\n"
                "This variable has to point to the directory containing the fonts\n"
                "you can clone from git://gitorious.org/qtwebkit/testfonts.git\n"
                "----------------------------------------------------------------------\n"
               );
        exit(1);
    }
    char currentPath[PATH_MAX+1];
    if (!getcwd(currentPath, PATH_MAX))
        qFatal("Couldn't get current working directory");
    QByteArray configFile = currentPath;
    FcConfig* config = FcConfigCreate();
    configFile += "/WebKitTools/DumpRenderTree/qt/fonts.conf";
    if (!FcConfigParseAndLoad (config, (FcChar8*) configFile.data(), true))
        qFatal("Couldn't load font configuration file");
    if (!FcConfigAppFontAddDir (config, (FcChar8*) fontDir.data()))
        qFatal("Couldn't add font dir!");
    FcConfigSetCurrent(config);

    appFontSet = FcConfigGetFonts(config, FcSetApplication);
    numFonts = appFontSet->nfont;
#endif
}
Beispiel #10
0
/*
 * Load the configuration files
 */
FcConfig *
FcInitLoadConfig (void)
{
    FcConfig	*config;
    FcInitDebug ();

    config = FcConfigCreate ();

    if (!config)
	return FcFalse;

    if (!FcConfigParseAndLoad (config, 0, FcTrue))
    {
	FcConfigDestroy (config);
	return FcInitFallbackConfig ();
    }

    if (config->cacheDirs && config->cacheDirs->num == 0)
    {
	fprintf (stderr,
		 "Fontconfig warning: no <cachedir> elements found. Check configuration.\n");
	fprintf (stderr,
		 "Fontconfig warning: adding <cachedir>%s</cachedir>\n",
		 FC_CACHEDIR);
	fprintf (stderr,
		 "Fontconfig warning: adding <cachedir>~/.fontconfig</cachedir>\n");
	if (!FcConfigAddCacheDir (config, (FcChar8 *) FC_CACHEDIR) ||
	    !FcConfigAddCacheDir (config, (FcChar8 *) "~/.fontconfig"))
	{
	    fprintf (stderr,
		     "Fontconfig error: out of memory");
	    FcConfigDestroy (config);
	    return FcInitFallbackConfig ();
	}
    }
    printf("4\n");

    return config;
}
Beispiel #11
0
static void setupFontconfig()
{
    // We wish to make the layout tests reproducable with respect to fonts. Skia
    // uses fontconfig to resolve font family names from WebKit into actual font
    // files found on the current system. This means that fonts vary based on the
    // system and also on the fontconfig configuration.
    //
    // To avoid this we initialise fontconfig here and install a configuration
    // which only knows about a few, select, fonts.

    // We have fontconfig parse a config file from our resources file. This
    // sets a number of aliases ("sans"->"Arial" etc), but doesn't include any
    // font directories.
    FcInit();

    char drtPath[PATH_MAX + 1];
    int drtPathSize = readlink("/proc/self/exe", drtPath, PATH_MAX);
    if (drtPathSize < 0 || drtPathSize > PATH_MAX) {
        fputs("Unable to resolve /proc/self/exe.", stderr);
        exit(1);
    }
    drtPath[drtPathSize] = 0;
    std::string drtDirPath(drtPath);
    size_t lastPathPos = drtDirPath.rfind("/");
    ASSERT(lastPathPos != std::string::npos);
    drtDirPath.erase(lastPathPos + 1);

    FcConfig* fontcfg = FcConfigCreate();
    std::string fontconfigPath = drtDirPath + "fonts.conf";
    if (!FcConfigParseAndLoad(fontcfg, reinterpret_cast<const FcChar8*>(fontconfigPath.c_str()), true)) {
        fputs("Failed to parse fontconfig config file\n", stderr);
        exit(1);
    }

    // This is the list of fonts that fontconfig will know about. It
    // will try its best to match based only on the fonts here in. The
    // paths are where these fonts are found on our Ubuntu boxes.
    static const char *const fonts[] = {
        "/usr/share/fonts/truetype/kochi/kochi-gothic.ttf",
        "/usr/share/fonts/truetype/kochi/kochi-mincho.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Arial.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Arial_Bold.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Arial_Bold_Italic.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Arial_Italic.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Comic_Sans_MS.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Comic_Sans_MS_Bold.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Courier_New.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Courier_New_Bold.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Courier_New_Bold_Italic.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Courier_New_Italic.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Georgia.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Georgia_Bold.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Georgia_Bold_Italic.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Georgia_Italic.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Impact.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Trebuchet_MS.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Trebuchet_MS_Bold.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Trebuchet_MS_Bold_Italic.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Trebuchet_MS_Italic.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Times_New_Roman.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Times_New_Roman_Bold.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Times_New_Roman_Bold_Italic.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Times_New_Roman_Italic.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Verdana.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Verdana_Bold.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Verdana_Bold_Italic.ttf",
        "/usr/share/fonts/truetype/msttcorefonts/Verdana_Italic.ttf",
        "/usr/share/fonts/truetype/thai/Garuda.ttf",
        // The DejaVuSans font is used by the css2.1 tests.
        "/usr/share/fonts/truetype/ttf-dejavu/DejaVuSans.ttf",
        "/usr/share/fonts/truetype/ttf-indic-fonts-core/lohit_hi.ttf",
        "/usr/share/fonts/truetype/ttf-indic-fonts-core/lohit_ta.ttf",
        "/usr/share/fonts/truetype/ttf-indic-fonts-core/MuktiNarrow.ttf",
    };
    for (size_t i = 0; i < arraysize(fonts); ++i) {
        if (access(fonts[i], R_OK)) {
            fprintf(stderr, "You are missing %s. Try re-running build/install-build-deps.sh. Also see "
                            "http://code.google.com/p/chromium/wiki/LayoutTestsLinux",
                            fonts[i]);
            exit(1);
        }
        if (!FcConfigAppFontAddFile(fontcfg, (FcChar8 *) fonts[i])) {
            fprintf(stderr, "Failed to load font %s\n", fonts[i]);
            exit(1);
        }
    }

    // We special case these fonts because they're only needed in a
    // few layout tests.
    static const char* const optionalFonts[] = {
        "/usr/share/fonts/truetype/ttf-indic-fonts-core/lohit_pa.ttf",
    };
    for (size_t i = 0; i < arraysize(optionalFonts); ++i) {
        const char* font = optionalFonts[i];

        // This font changed paths across Ubuntu releases, so try checking in both locations.
        if (!strcmp(font, "/usr/share/fonts/truetype/ttf-indic-fonts-core/lohit_pa.ttf")
            && access(font, R_OK) < 0)
            font = "/usr/share/fonts/truetype/ttf-punjabi-fonts/lohit_pa.ttf";

        if (access(font, R_OK) < 0) {
            fprintf(stderr, "You are missing %s. Without this, some layout tests may fail. "
                            "See http://code.google.com/p/chromium/wiki/LayoutTestsLinux "
                            "for more.\n", font);
        } else if (!FcConfigAppFontAddFile(fontcfg, (FcChar8 *) font)) {
            fprintf(stderr, "Failed to load font %s\n", font);
            exit(1);
        }
    }

    // Also load the layout-test-specific "Ahem" font.
    std::string ahemPath = drtDirPath + "AHEM____.TTF";
    if (!FcConfigAppFontAddFile(fontcfg, reinterpret_cast<const FcChar8*>(ahemPath.c_str()))) {
        fprintf(stderr, "Failed to load font %s\n", ahemPath.c_str());
        exit(1);
    }

    if (!FcConfigSetCurrent(fontcfg)) {
        fputs("Failed to set the default font configuration\n", stderr);
        exit(1);
    }
}
Beispiel #12
0
int main(int argc, char* argv[])
{
#ifdef Q_WS_X11
    FcInit();
    FcConfig *config = FcConfigCreate();
    QByteArray fontDir = getenv("WEBKIT_TESTFONTS");
    if (fontDir.isEmpty() || !QDir(fontDir).exists()) {
        fprintf(stderr,
                "\n\n"
                "--------------------------------------------------------------------\n"
                "WEBKIT_TESTFONTS environment variable is not set correctly.\n"
                "This variable has to point to the directory containing the fonts\n"
                "you can checkout from svn://labs.trolltech.com/svn/webkit/testfonts\n"
                "--------------------------------------------------------------------\n"
               );
        exit(1);
    }
    char currentPath[PATH_MAX+1];
    getcwd(currentPath, PATH_MAX);
    QByteArray configFile = currentPath;
    configFile += "/WebKitTools/DumpRenderTree/qt/fonts.conf";
    if (!FcConfigParseAndLoad (config, (FcChar8*) configFile.data(), true))
        qFatal("Couldn't load font configuration file");
    if (!FcConfigAppFontAddDir (config, (FcChar8*) fontDir.data()))
        qFatal("Couldn't add font dir!");
    FcConfigSetCurrent(config);
#endif
    QApplication app(argc, argv);
#ifdef Q_WS_X11
    QX11Info::setAppDpiY(0, 96);
    QX11Info::setAppDpiX(0, 96);
#endif

    QFont f("Sans Serif");
    f.setPointSize(9);
    f.setWeight(QFont::Normal);
    f.setStyle(QFont::StyleNormal);
    app.setFont(f);
    app.setStyle(QLatin1String("Plastique"));


    signal(SIGILL, crashHandler);    /* 4:   illegal instruction (not reset when caught) */
    signal(SIGTRAP, crashHandler);   /* 5:   trace trap (not reset when caught) */
    signal(SIGFPE, crashHandler);    /* 8:   floating point exception */
    signal(SIGBUS, crashHandler);    /* 10:  bus error */
    signal(SIGSEGV, crashHandler);   /* 11:  segmentation violation */
    signal(SIGSYS, crashHandler);    /* 12:  bad argument to system call */
    signal(SIGPIPE, crashHandler);   /* 13:  write on a pipe with no reader */
    signal(SIGXCPU, crashHandler);   /* 24:  exceeded CPU time limit */
    signal(SIGXFSZ, crashHandler);   /* 25:  exceeded file size limit */

    QStringList args = app.arguments();
    if (args.count() < 2) {
        qDebug() << "Usage: DumpRenderTree [-v] filename";
        exit(0);
    }

    // supress debug output from Qt if not started with -v
    if (!args.contains(QLatin1String("-v")))
        qInstallMsgHandler(messageHandler);

    WebCore::DumpRenderTree dumper;

    if (args.last() == QLatin1String("-")) {
        dumper.open();
    } else {
        if (!args.last().startsWith("/")
                && !args.last().startsWith("file:")
                && !args.last().startsWith("http:")
                && !args.last().startsWith("https:")) {
            QString path = QDir::currentPath();
            if (!path.endsWith('/'))
                path.append('/');
            args.last().prepend(path);
        }
        dumper.open(QUrl(args.last()));
    }
    return app.exec();
#ifdef Q_WS_X11
    FcConfigSetCurrent(0);
#endif
}
Beispiel #13
0
void initializeFontConfigSetting()
{
    if (g_getenv("WEBKIT_SKIP_WEBKITTESTRUNNER_FONTCONFIG_INITIALIZATION"))
        return;

    FcInit();

    // If a test resulted a font being added or removed via the @font-face rule, then
    // we want to reset the FontConfig configuration to prevent it from affecting other tests.
    static int numFonts = 0;
    FcFontSet* appFontSet = FcConfigGetFonts(0, FcSetApplication);
    if (appFontSet && numFonts && appFontSet->nfont == numFonts)
        return;

    // Load our configuration file, which sets up proper aliases for family
    // names like sans, serif and monospace.
    FcConfig* config = FcConfigCreate();
    GUniquePtr<gchar> fontConfigFilename(g_build_filename(FONTS_CONF_DIR, "fonts.conf", nullptr));
    if (!g_file_test(fontConfigFilename.get(), G_FILE_TEST_IS_REGULAR))
        g_error("Cannot find fonts.conf at %s\n", fontConfigFilename.get());
    if (!FcConfigParseAndLoad(config, reinterpret_cast<FcChar8*>(fontConfigFilename.get()), true))
        g_error("Couldn't load font configuration file from: %s", fontConfigFilename.get());

    CString fontsPath = getFontsPath();
    if (fontsPath.isNull())
        g_error("Could not locate test fonts at %s. Is WEBKIT_TOP_LEVEL set?", fontsPath.data());

    GUniquePtr<GDir> fontsDirectory(g_dir_open(fontsPath.data(), 0, nullptr));
    while (const char* directoryEntry = g_dir_read_name(fontsDirectory.get())) {
        if (!g_str_has_suffix(directoryEntry, ".ttf") && !g_str_has_suffix(directoryEntry, ".otf"))
            continue;
        GUniquePtr<gchar> fontPath(g_build_filename(fontsPath.data(), directoryEntry, nullptr));
        if (!FcConfigAppFontAddFile(config, reinterpret_cast<const FcChar8*>(fontPath.get())))
            g_error("Could not load font at %s!", fontPath.get());
    }

    // Ahem is used by many layout tests.
    GUniquePtr<gchar> ahemFontFilename(g_build_filename(FONTS_CONF_DIR, "AHEM____.TTF", nullptr));
    if (!FcConfigAppFontAddFile(config, reinterpret_cast<FcChar8*>(ahemFontFilename.get())))
        g_error("Could not load font at %s!", ahemFontFilename.get()); 

    static const char* fontFilenames[] = {
        "WebKitWeightWatcher100.ttf",
        "WebKitWeightWatcher200.ttf",
        "WebKitWeightWatcher300.ttf",
        "WebKitWeightWatcher400.ttf",
        "WebKitWeightWatcher500.ttf",
        "WebKitWeightWatcher600.ttf",
        "WebKitWeightWatcher700.ttf",
        "WebKitWeightWatcher800.ttf",
        "WebKitWeightWatcher900.ttf",
        0
    };

    for (size_t i = 0; fontFilenames[i]; ++i) {
        GUniquePtr<gchar> fontFilename(g_build_filename(FONTS_CONF_DIR, "..", "..", "fonts", fontFilenames[i], nullptr));
        if (!FcConfigAppFontAddFile(config, reinterpret_cast<FcChar8*>(fontFilename.get())))
            g_error("Could not load font at %s!", fontFilename.get()); 
    }

    // A font with no valid Fontconfig encoding to test https://bugs.webkit.org/show_bug.cgi?id=47452
    GUniquePtr<gchar> fontWithNoValidEncodingFilename(g_build_filename(FONTS_CONF_DIR, "FontWithNoValidEncoding.fon", nullptr));
    if (!FcConfigAppFontAddFile(config, reinterpret_cast<FcChar8*>(fontWithNoValidEncodingFilename.get())))
        g_error("Could not load font at %s!", fontWithNoValidEncodingFilename.get()); 

    if (!FcConfigSetCurrent(config))
        g_error("Could not set the current font configuration!");

    numFonts = FcConfigGetFonts(config, FcSetApplication)->nfont;
}
Beispiel #14
0
int main(int argc, char** argv)
{
	cairo_t *cr;
	cairo_status_t status;
	cairo_surface_t *surface;
	//FT_Bitmap bmp = {0};

	int stride = 0;
	int width = 640;
	int height = 480;



	bool ok = FcConfigAppFontAddFile(NULL, (FcChar8*)"fonts/ComicSansAfrica.ttf");
	if (!ok)
	{
		printf("Failed to load ComicSansAfrica.ttf\n");
	}

	FcChar8 *configName = FcConfigFilename(NULL);
	printf("%s", (const char*)configName);
	printf("\n");

	FcConfig* config = FcConfigCreate();
	FcConfigParseAndLoad(config, configName, true);
	FcConfigSetCurrent(config);

	/* FT buffer */
	//FT_Bitmap_New(&bmp);
	//bmp.rows = height;
	//bmp.width = width;

	//bmp.buffer = (unsigned char*)malloc(bmp.rows * bmp.width * 4);
	// if (NULL == bmp.buffer)
	// {
	// 	printf("+ error: cannot allocate the buffer for the output bitmap.\n");
	// 	exit(EXIT_FAILURE);
	// }

	//bmp.pitch = ((width+3) & -4) * 4;
	//bmp.pixel_mode = FT_PIXEL_MODE_BGRA;

	//printf("%d\n", bmp.pitch);

	//stride = cairo_format_stride_for_width(CAIRO_FORMAT_ARGB32, width);
	//printf("%d\n", stride);

	//surface = cairo_image_surface_create_for_data(bmp.buffer, CAIRO_FORMAT_ARGB32, width, height, stride);
	surface = cairo_image_surface_create(CAIRO_FORMAT_ARGB32, width, height);
	if (CAIRO_STATUS_SUCCESS != cairo_surface_status(surface)) {
		printf("+ error: couldn't create the surface.\n");
		exit(EXIT_FAILURE);
	}
	cr = cairo_create(surface);
	if (CAIRO_STATUS_NO_MEMORY == cairo_status(cr)) {
		printf("+ error: out of memory, cannot create cairo_t*\n");
		exit(EXIT_FAILURE);
	}


	cairo_set_source_rgba(cr, 1.0, 1.0, 1.0, 1.0);
	cairo_paint(cr);

	rendertext(cr);


	status = cairo_surface_write_to_png(surface, "out.png");
	cairo_surface_destroy(surface);
	cairo_destroy(cr);

	return 0;
}
Beispiel #15
0
void inititializeFontConfigSetting()
{
    FcInit();

    // If a test resulted a font being added or removed via the @font-face rule, then
    // we want to reset the FontConfig configuration to prevent it from affecting other tests.
    static int numFonts = 0;
    FcFontSet* appFontSet = FcConfigGetFonts(0, FcSetApplication);
    if (appFontSet && numFonts && appFontSet->nfont == numFonts)
        return;

    // Load our configuration file, which sets up proper aliases for family
    // names like sans, serif and monospace.
    FcConfig* config = FcConfigCreate();
    GOwnPtr<gchar> fontConfigFilename(g_build_filename(FONTS_CONF_DIR, "fonts.conf", NULL));
    if (!g_file_test(fontConfigFilename.get(), G_FILE_TEST_IS_REGULAR))
        g_error("Cannot find fonts.conf at %s\n", fontConfigFilename.get());
    if (!FcConfigParseAndLoad(config, reinterpret_cast<FcChar8*>(fontConfigFilename.get()), true))
        g_error("Couldn't load font configuration file from: %s", fontConfigFilename.get());

    static const char *const fontDirectories[] = {
        "/usr/share/fonts/truetype/liberation",
        "/usr/share/fonts/truetype/ttf-liberation",
        "/usr/share/fonts/liberation",
        "/usr/share/fonts/truetype/ttf-dejavu",
        "/usr/share/fonts/dejavu",
        "/usr/share/fonts/opentype/stix",
        "/usr/share/fonts/stix"
    };

    static const char *const fontPaths[] = {
        "LiberationMono-BoldItalic.ttf",
        "LiberationMono-Bold.ttf",
        "LiberationMono-Italic.ttf",
        "LiberationMono-Regular.ttf",
        "LiberationSans-BoldItalic.ttf",
        "LiberationSans-Bold.ttf",
        "LiberationSans-Italic.ttf",
        "LiberationSans-Regular.ttf",
        "LiberationSerif-BoldItalic.ttf",
        "LiberationSerif-Bold.ttf",
        "LiberationSerif-Italic.ttf",
        "LiberationSerif-Regular.ttf",
        "DejaVuSans.ttf",
        "DejaVuSerif.ttf",

        // MathML tests require the STIX fonts.
        "STIXGeneral.otf",
        "STIXGeneralBolIta.otf",
        "STIXGeneralBol.otf",
        "STIXGeneralItalic.otf"
    };

    // TODO: Some tests use Lucida. We should load these as well, once it becomes
    // clear how to install these fonts easily on Fedora.
    for (size_t font = 0; font < G_N_ELEMENTS(fontPaths); font++) {
        bool found = false;
        for (size_t path = 0; path < G_N_ELEMENTS(fontDirectories); path++) {
            GOwnPtr<gchar> fullPath(g_build_filename(fontDirectories[path], fontPaths[font], NULL));
            if (g_file_test(fullPath.get(), G_FILE_TEST_EXISTS)) {
                found = true;
                if (!FcConfigAppFontAddFile(config, reinterpret_cast<const FcChar8*>(fullPath.get())))
                    g_error("Could not load font at %s!", fullPath.get());
                else
                    break;
            }
        }

        if (!found) {
            GOwnPtr<gchar> directoriesDescription;
            for (size_t path = 0; path < G_N_ELEMENTS(fontDirectories); path++)
                directoriesDescription.set(g_strjoin(":", directoriesDescription.release(), fontDirectories[path], NULL));
            g_error("Could not find font %s in %s. Either install this font or file a bug "
                    "at http://bugs.webkit.org if it is installed in another location.",
                    fontPaths[font], directoriesDescription.get());
        }
    }

    // Ahem is used by many layout tests.
    GOwnPtr<gchar> ahemFontFilename(g_build_filename(FONTS_CONF_DIR, "AHEM____.TTF", NULL));
    if (!FcConfigAppFontAddFile(config, reinterpret_cast<FcChar8*>(ahemFontFilename.get())))
        g_error("Could not load font at %s!", ahemFontFilename.get()); 

    static const char* fontFilenames[] = {
        "WebKitWeightWatcher100.ttf",
        "WebKitWeightWatcher200.ttf",
        "WebKitWeightWatcher300.ttf",
        "WebKitWeightWatcher400.ttf",
        "WebKitWeightWatcher500.ttf",
        "WebKitWeightWatcher600.ttf",
        "WebKitWeightWatcher700.ttf",
        "WebKitWeightWatcher800.ttf",
        "WebKitWeightWatcher900.ttf",
        0
    };

    for (size_t i = 0; fontFilenames[i]; ++i) {
        GOwnPtr<gchar> fontFilename(g_build_filename(FONTS_CONF_DIR, "..", "..", "fonts", fontFilenames[i], NULL));
        if (!FcConfigAppFontAddFile(config, reinterpret_cast<FcChar8*>(fontFilename.get())))
            g_error("Could not load font at %s!", fontFilename.get()); 
    }

    // A font with no valid Fontconfig encoding to test https://bugs.webkit.org/show_bug.cgi?id=47452
    GOwnPtr<gchar> fontWithNoValidEncodingFilename(g_build_filename(FONTS_CONF_DIR, "FontWithNoValidEncoding.fon", NULL));
    if (!FcConfigAppFontAddFile(config, reinterpret_cast<FcChar8*>(fontWithNoValidEncodingFilename.get())))
        g_error("Could not load font at %s!", fontWithNoValidEncodingFilename.get()); 

    if (!FcConfigSetCurrent(config))
        g_error("Could not set the current font configuration!");

    numFonts = FcConfigGetFonts(config, FcSetApplication)->nfont;
}