/* Handle the BREAK insn. */
void
frv_break (SIM_CPU *current_cpu)
{
IADDR pc;
SIM_DESC sd = CPU_STATE (current_cpu);
#ifdef SIM_HAVE_BREAKPOINTS
/* First try sim-break.c. If it's a breakpoint the simulator "owns"
it doesn't return. Otherwise it returns and let's us try. */
pc = GET_H_PC ();
sim_handle_breakpoint (sd, current_cpu, pc);
/* Fall through. */
#endif
if (STATE_ENVIRONMENT (sd) != OPERATING_ENVIRONMENT)
{
/* Invalidate the insn cache because the debugger will presumably
replace the breakpoint insn with the real one. */
#ifndef SIM_HAVE_BREAKPOINTS
pc = GET_H_PC ();
#endif
sim_engine_halt (sd, current_cpu, NULL, pc, sim_stopped, SIM_SIGTRAP);
}
frv_queue_break_interrupt (current_cpu);
}
/* Check for interrupts caused by illegal insn access. These conditions are
checked in the order specified by the fr400 and fr500 LSI specs. */
void
frv_detect_insn_access_interrupts (SIM_CPU *current_cpu, SCACHE *sc)
{
const CGEN_INSN *insn = sc->argbuf.idesc->idata;
SIM_DESC sd = CPU_STATE (current_cpu);
FRV_VLIW *vliw = CPU_VLIW (current_cpu);
/* Check for vliw constraints. */
if (vliw->constraint_violation)
frv_queue_illegal_instruction_interrupt (current_cpu, insn);
/* Check for non-excepting insns. */
else if (CGEN_INSN_ATTR_VALUE (insn, CGEN_INSN_NON_EXCEPTING)
&& ! GET_H_PSR_NEM ())
frv_queue_non_implemented_instruction_interrupt (current_cpu, insn);
/* Check for conditional insns. */
else if (CGEN_INSN_ATTR_VALUE (insn, CGEN_INSN_CONDITIONAL)
&& ! GET_H_PSR_CM ())
frv_queue_non_implemented_instruction_interrupt (current_cpu, insn);
/* Make sure floating point support is enabled. */
else if (! GET_H_PSR_EF ())
{
/* Generate fp_disabled if it is a floating point insn or if PSR.EM is
off and the insns accesses a fp register. */
if (frv_is_float_insn (insn)
|| (CGEN_INSN_ATTR_VALUE (insn, CGEN_INSN_FR_ACCESS)
&& ! GET_H_PSR_EM ()))
frv_queue_float_disabled_interrupt (current_cpu);
}
/* Make sure media support is enabled. */
else if (! GET_H_PSR_EM ())
{
/* Generate mp_disabled if it is a media insn. */
if (frv_is_media_insn (insn) || CGEN_INSN_NUM (insn) == FRV_INSN_MTRAP)
frv_queue_media_disabled_interrupt (current_cpu);
}
/* Check for privileged insns. */
else if (CGEN_INSN_ATTR_VALUE (insn, CGEN_INSN_PRIVILEGED) &&
! GET_H_PSR_S ())
frv_queue_privileged_instruction_interrupt (current_cpu, insn);
#if 0 /* disable for now until we find out how FSR0.QNE gets reset. */
else
{
/* Enter the halt state if FSR0.QNE is set and we are executing a
floating point insn, a media insn or an insn which access a FR
register. */
SI fsr0 = GET_FSR (0);
if (GET_FSR_QNE (fsr0)
&& (frv_is_float_insn (insn) || frv_is_media_insn (insn)
|| CGEN_INSN_ATTR_VALUE (insn, CGEN_INSN_FR_ACCESS)))
{
sim_engine_halt (sd, current_cpu, NULL, GET_H_PC (), sim_stopped,
SIM_SIGINT);
}
}
#endif
}
/* Handle a program interrupt or a software interrupt. */
void
frv_external_interrupt (
SIM_CPU *current_cpu, struct frv_interrupt_queue_element *item, IADDR pc
)
{
USI new_pc;
struct frv_interrupt *interrupt = & frv_interrupt_table[item->kind];
/* Don't process the interrupt if PSR.ET is not set or if it is masked.
Interrupt 15 is processed even if it appears to be masked. */
if (! GET_H_PSR_ET ()
|| (interrupt->kind != FRV_INTERRUPT_LEVEL_15
&& interrupt->kind < GET_H_PSR_PIL ()))
return; /* Leave it for later. */
/* Remove the interrupt from the queue. */
--frv_interrupt_state.queue_index;
/* PCSR=PC
PSR.PS=PSR.S
PSR.ET=0
PSR.S=1
if PSR.ESR==1
SR0 through SR3=GR4 through GR7
TBR.TT=interrupt handler offset
PC=TBR
*/
SET_H_PSR_PS (GET_H_PSR_S ());
SET_H_PSR_ET (0);
SET_H_PSR_S (1);
/* Must set PSR.S first to allow access to supervisor-only spr registers. */
SET_H_SPR (H_SPR_PCSR, GET_H_PC ());
/* Set the new PC in the TBR. */
SET_H_TBR_TT (interrupt->handler_offset);
new_pc = GET_H_SPR (H_SPR_TBR);
SET_H_PC (new_pc);
}
USI
iq2000bf_h_pc_get (SIM_CPU *current_cpu)
{
return GET_H_PC ();
}
BI
frvbf_check_non_excepting_load (
SIM_CPU *current_cpu, SI base_index, SI disp_index, SI target_index,
SI immediate_disp, QI data_size, BI is_float
)
{
BI rc = 1; /* perform the load. */
SIM_DESC sd = CPU_STATE (current_cpu);
int daec = 0;
int rec = 0;
int ec = 0;
USI necr;
int do_elos;
SI NE_flags[2];
SI NE_base;
SI nesr;
SI ne_index;
FRV_REGISTER_CONTROL *control;
SI address = GET_H_GR (base_index);
if (disp_index >= 0)
address += GET_H_GR (disp_index);
else
address += immediate_disp;
/* Check for interrupt factors. */
switch (data_size)
{
case NESR_UQI_SIZE:
case NESR_QI_SIZE:
break;
case NESR_UHI_SIZE:
case NESR_HI_SIZE:
if (address & 1)
ec = 1;
break;
case NESR_SI_SIZE:
if (address & 3)
ec = 1;
break;
case NESR_DI_SIZE:
if (address & 7)
ec = 1;
if (target_index & 1)
rec = 1;
break;
case NESR_XI_SIZE:
if (address & 0xf)
ec = 1;
if (target_index & 3)
rec = 1;
break;
default:
{
IADDR pc = GET_H_PC ();
sim_engine_abort (sd, current_cpu, pc,
"check_non_excepting_load: Incorrect data_size\n");
break;
}
}
control = CPU_REGISTER_CONTROL (current_cpu);
if (control->spr[H_SPR_NECR].implemented)
{
necr = GET_NECR ();
do_elos = GET_NECR_VALID (necr) && GET_NECR_ELOS (necr);
}
else
do_elos = 0;
/* NECR, NESR, NEEAR are only implemented for the full frv machine. */
if (do_elos)
{
ne_index = next_available_nesr (current_cpu, NO_NESR);
if (ne_index == NO_NESR)
{
IADDR pc = GET_H_PC ();
sim_engine_abort (sd, current_cpu, pc,
"No available NESR register\n");
}
/* Fill in the basic fields of the NESR. */
nesr = GET_NESR (ne_index);
SET_NESR_VALID (nesr);
SET_NESR_EAV (nesr);
SET_NESR_DRN (nesr, target_index);
SET_NESR_SIZE (nesr, data_size);
SET_NESR_NEAN (nesr, ne_index);
if (is_float)
SET_NESR_FR (nesr);
else
CLEAR_NESR_FR (nesr);
/* Set the corresponding NEEAR. */
SET_NEEAR (ne_index, address);
SET_NESR_DAEC (nesr, 0);
SET_NESR_REC (nesr, 0);
SET_NESR_EC (nesr, 0);
}
/* Set the NE flag corresponding to the target register if an interrupt
factor was detected.
daec is not checked here yet, but is declared for future reference. */
if (is_float)
NE_base = H_SPR_FNER0;
else
NE_base = H_SPR_GNER0;
GET_NE_FLAGS (NE_flags, NE_base);
if (rec)
{
SET_NE_FLAG (NE_flags, target_index);
if (do_elos)
SET_NESR_REC (nesr, NESR_REGISTER_NOT_ALIGNED);
}
if (ec)
{
SET_NE_FLAG (NE_flags, target_index);
if (do_elos)
SET_NESR_EC (nesr, NESR_MEM_ADDRESS_NOT_ALIGNED);
}
if (do_elos)
SET_NESR (ne_index, nesr);
/* If no interrupt factor was detected then set the NE flag on the
target register if the NE flag on one of the input registers
is already set. */
if (! rec && ! ec && ! daec)
{
BI ne_flag = GET_NE_FLAG (NE_flags, base_index);
if (disp_index >= 0)
ne_flag |= GET_NE_FLAG (NE_flags, disp_index);
if (ne_flag)
{
SET_NE_FLAG (NE_flags, target_index);
rc = 0; /* Do not perform the load. */
}
else
CLEAR_NE_FLAG (NE_flags, target_index);
}
SET_NE_FLAGS (NE_base, NE_flags);
return rc; /* perform the load? */
}
