void TRACK::GetMsgPanelInfoBase_Common( std::vector< MSG_PANEL_ITEM >& aList )
{
wxString msg;
// Display Net Name
if( GetBoard() )
{
NETINFO_ITEM* net = GetNet();
if( net )
msg = net->GetNetname();
else
msg = wxT( "<noname>" );
aList.push_back( MSG_PANEL_ITEM( _( "NetName" ), msg, RED ) );
// Display net code : (useful in test or debug)
msg.Printf( wxT( "%d.%d" ), GetNetCode(), GetSubNet() );
aList.push_back( MSG_PANEL_ITEM( _( "NetCode" ), msg, RED ) );
}
#if defined(DEBUG)
// Display the flags
msg.Printf( wxT( "0x%08X" ), m_Flags );
aList.push_back( MSG_PANEL_ITEM( wxT( "Flags" ), msg, BLUE ) );
#if 0
// Display start and end pointers:
msg.Printf( wxT( "%p" ), start );
aList.push_back( MSG_PANEL_ITEM( wxT( "start ptr" ), msg, BLUE ) );
msg.Printf( wxT( "%p" ), end );
aList.push_back( MSG_PANEL_ITEM( wxT( "end ptr" ), msg, BLUE ) );
// Display this ptr
msg.Printf( wxT( "%p" ), this );
aList.push_back( MSG_PANEL_ITEM( wxT( "this" ), msg, BLUE ) );
#endif
#if 0
// Display start and end positions:
msg.Printf( wxT( "%d %d" ), m_Start.x, m_Start.y );
aList.push_back( MSG_PANEL_ITEM( wxT( "Start pos" ), msg, BLUE ) );
msg.Printf( wxT( "%d %d" ), m_End.x, m_End.y );
aList.push_back( MSG_PANEL_ITEM( wxT( "End pos" ), msg, BLUE ) );
#endif
#endif // defined(DEBUG)
// Display the State member
msg = wxT( ". . " );
if( GetState( TRACK_LOCKED ) )
msg[0] = 'F';
if( GetState( TRACK_AR ) )
msg[2] = 'A';
aList.push_back( MSG_PANEL_ITEM( _( "Status" ), msg, MAGENTA ) );
}
void D_PAD::GetMsgPanelInfo( std::vector< MSG_PANEL_ITEM>& aList )
{
MODULE* module;
wxString Line;
BOARD* board;
module = (MODULE*) m_Parent;
if( module )
{
wxString msg = module->GetReference();
aList.push_back( MSG_PANEL_ITEM( _( "Footprint" ), msg, DARKCYAN ) );
StringPadName( Line );
aList.push_back( MSG_PANEL_ITEM( _( "Pad" ), Line, BROWN ) );
}
aList.push_back( MSG_PANEL_ITEM( _( "Net" ), GetNetname(), DARKCYAN ) );
/* For test and debug only: display m_physical_connexion and
* m_logical_connexion */
#if 1 // Used only to debug connectivity calculations
Line.Printf( wxT( "%d-%d-%d " ), GetSubRatsnest(), GetSubNet(), GetZoneSubNet() );
aList.push_back( MSG_PANEL_ITEM( wxT( "L-P-Z" ), Line, DARKGREEN ) );
#endif
board = GetBoard();
aList.push_back( MSG_PANEL_ITEM( _( "Layer" ),
LayerMaskDescribe( board, m_layerMask ), DARKGREEN ) );
aList.push_back( MSG_PANEL_ITEM( ShowPadShape(), ShowPadAttr(), DARKGREEN ) );
Line = ::CoordinateToString( m_Size.x );
aList.push_back( MSG_PANEL_ITEM( _( "Width" ), Line, RED ) );
Line = ::CoordinateToString( m_Size.y );
aList.push_back( MSG_PANEL_ITEM( _( "Height" ), Line, RED ) );
Line = ::CoordinateToString( (unsigned) m_Drill.x );
if( GetDrillShape() == PAD_DRILL_SHAPE_CIRCLE )
{
aList.push_back( MSG_PANEL_ITEM( _( "Drill" ), Line, RED ) );
}
else
{
Line = ::CoordinateToString( (unsigned) m_Drill.x );
wxString msg;
msg = ::CoordinateToString( (unsigned) m_Drill.y );
Line += wxT( "/" ) + msg;
aList.push_back( MSG_PANEL_ITEM( _( "Drill X / Y" ), Line, RED ) );
}
double module_orient = module ? module->GetOrientation() : 0;
if( module_orient )
Line.Printf( wxT( "%3.1f(+%3.1f)" ),
( m_Orient - module_orient ) / 10.0,
module_orient / 10.0 );
else
Line.Printf( wxT( "%3.1f" ), m_Orient / 10.0 );
aList.push_back( MSG_PANEL_ITEM( _( "Angle" ), Line, LIGHTBLUE ) );
Line = ::CoordinateToString( m_Pos.x ) + wxT( ", " ) + ::CoordinateToString( m_Pos.y );
aList.push_back( MSG_PANEL_ITEM( _( "Position" ), Line, LIGHTBLUE ) );
if( GetPadToDieLength() )
{
Line = ::CoordinateToString( GetPadToDieLength() );
aList.push_back( MSG_PANEL_ITEM( _( "Length in package" ), Line, CYAN ) );
}
}
void D_PAD::GetMsgPanelInfo( std::vector< MSG_PANEL_ITEM>& aList )
{
MODULE* module;
wxString Line;
BOARD* board;
module = (MODULE*) m_Parent;
if( module )
{
wxString msg = module->GetReference();
aList.push_back( MSG_PANEL_ITEM( _( "Module" ), msg, DARKCYAN ) );
ReturnStringPadName( Line );
aList.push_back( MSG_PANEL_ITEM( _( "RefP" ), Line, BROWN ) );
}
aList.push_back( MSG_PANEL_ITEM( _( "Net" ), m_Netname, DARKCYAN ) );
/* For test and debug only: display m_physical_connexion and
* m_logical_connexion */
#if 1 // Used only to debug connectivity calculations
Line.Printf( wxT( "%d-%d-%d " ), GetSubRatsnest(), GetSubNet(), GetZoneSubNet() );
aList.push_back( MSG_PANEL_ITEM( wxT( "L-P-Z" ), Line, DARKGREEN ) );
#endif
board = GetBoard();
wxString layerInfo;
if( (m_layerMask & ALL_CU_LAYERS) == 0 ) // pad is not on any copper layers
{
switch( m_layerMask & ~ALL_CU_LAYERS )
{
case ADHESIVE_LAYER_BACK:
layerInfo = board->GetLayerName( ADHESIVE_N_BACK );
break;
case ADHESIVE_LAYER_FRONT:
layerInfo = board->GetLayerName( ADHESIVE_N_FRONT );
break;
case SOLDERPASTE_LAYER_BACK:
layerInfo = board->GetLayerName( SOLDERPASTE_N_BACK );
break;
case SOLDERPASTE_LAYER_FRONT:
layerInfo = board->GetLayerName( SOLDERPASTE_N_FRONT );
break;
case SILKSCREEN_LAYER_BACK:
layerInfo = board->GetLayerName( SILKSCREEN_N_BACK );
break;
case SILKSCREEN_LAYER_FRONT:
layerInfo = board->GetLayerName( SILKSCREEN_N_FRONT );
break;
case SOLDERMASK_LAYER_BACK:
layerInfo = board->GetLayerName( SOLDERMASK_N_BACK );
break;
case SOLDERMASK_LAYER_FRONT:
layerInfo = board->GetLayerName( SOLDERMASK_N_FRONT );
break;
case DRAW_LAYER:
layerInfo = board->GetLayerName( DRAW_N );
break;
case COMMENT_LAYER:
layerInfo = board->GetLayerName( COMMENT_N );
break;
case ECO1_LAYER:
layerInfo = board->GetLayerName( ECO1_N );
break;
case ECO2_LAYER:
layerInfo = board->GetLayerName( ECO2_N );
break;
case EDGE_LAYER:
layerInfo = board->GetLayerName( EDGE_N );
break;
default:
layerInfo = _( "Non-copper" );
break;
}
}
else
{
#define INTERIOR_COPPER (ALL_CU_LAYERS & ~(LAYER_BACK | LAYER_FRONT))
static const wxChar* andInternal = _( " & int" );
if( (m_layerMask & (LAYER_BACK | LAYER_FRONT)) == LAYER_BACK )
{
layerInfo = board->GetLayerName( LAYER_N_BACK );
if( m_layerMask & INTERIOR_COPPER )
layerInfo += andInternal;
}
else if( (m_layerMask & (LAYER_BACK | LAYER_FRONT)) == (LAYER_BACK | LAYER_FRONT) )
{
layerInfo = board->GetLayerName( LAYER_N_BACK ) + wxT(", ") +
board->GetLayerName( LAYER_N_FRONT );
if( m_layerMask & INTERIOR_COPPER )
layerInfo += andInternal;
}
else if( (m_layerMask & (LAYER_BACK | LAYER_FRONT)) == LAYER_FRONT )
{
layerInfo = board->GetLayerName( LAYER_N_FRONT );
if( m_layerMask & INTERIOR_COPPER )
layerInfo += andInternal;
}
else // necessarily true: if( m_layerMask & INTERIOR_COPPER )
{
layerInfo = _( "internal" );
}
}
aList.push_back( MSG_PANEL_ITEM( _( "Layer" ), layerInfo, DARKGREEN ) );
aList.push_back( MSG_PANEL_ITEM( ShowPadShape(), ShowPadAttr(), DARKGREEN ) );
Line = ::CoordinateToString( m_Size.x );
aList.push_back( MSG_PANEL_ITEM( _( "H Size" ), Line, RED ) );
Line = ::CoordinateToString( m_Size.y );
aList.push_back( MSG_PANEL_ITEM( _( "V Size" ), Line, RED ) );
Line = ::CoordinateToString( (unsigned) m_Drill.x );
if( m_DrillShape == PAD_CIRCLE )
{
aList.push_back( MSG_PANEL_ITEM( _( "Drill" ), Line, RED ) );
}
else
{
Line = ::CoordinateToString( (unsigned) m_Drill.x );
wxString msg;
msg = ::CoordinateToString( (unsigned) m_Drill.y );
Line += wxT( "/" ) + msg;
aList.push_back( MSG_PANEL_ITEM( _( "Drill X / Y" ), Line, RED ) );
}
int module_orient = module ? module->GetOrientation() : 0;
if( module_orient )
Line.Printf( wxT( "%3.1f(+%3.1f)" ),
(double) ( m_Orient - module_orient ) / 10,
(double) module_orient / 10 );
else
Line.Printf( wxT( "%3.1f" ), (double) m_Orient / 10 );
aList.push_back( MSG_PANEL_ITEM( _( "Orient" ), Line, LIGHTBLUE ) );
Line = ::CoordinateToString( m_Pos.x );
aList.push_back( MSG_PANEL_ITEM( _( "X Pos" ), Line, LIGHTBLUE ) );
Line = ::CoordinateToString( m_Pos.y );
aList.push_back( MSG_PANEL_ITEM( _( "Y pos" ), Line, LIGHTBLUE ) );
if( GetPadToDieLength() )
{
Line = ::CoordinateToString( GetPadToDieLength() );
aList.push_back( MSG_PANEL_ITEM( _( "Length in package" ), Line, CYAN ) );
}
}
