void maple_get_rtc_time(struct rtc_time *tm)
{
do {
tm->tm_sec = maple_clock_read(RTC_SECONDS);
tm->tm_min = maple_clock_read(RTC_MINUTES);
tm->tm_hour = maple_clock_read(RTC_HOURS);
tm->tm_mday = maple_clock_read(RTC_DAY_OF_MONTH);
tm->tm_mon = maple_clock_read(RTC_MONTH);
tm->tm_year = maple_clock_read(RTC_YEAR);
} while (tm->tm_sec != maple_clock_read(RTC_SECONDS));
if (!(maple_clock_read(RTC_CONTROL) & RTC_DM_BINARY)
|| RTC_ALWAYS_BCD) {
tm->tm_sec = bcd2bin(tm->tm_sec);
tm->tm_min = bcd2bin(tm->tm_min);
tm->tm_hour = bcd2bin(tm->tm_hour);
tm->tm_mday = bcd2bin(tm->tm_mday);
tm->tm_mon = bcd2bin(tm->tm_mon);
tm->tm_year = bcd2bin(tm->tm_year);
}
if ((tm->tm_year + 1900) < 1970)
tm->tm_year += 100;
GregorianDay(tm);
}
/* read clock time from DS1306 and return it in *tmp */
int rtc_get (struct rtc_time *tmp)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
unsigned char spi_byte; /* Data Byte */
init_spi (); /* set port B for software SPI */
/* Now we can enable the DS1306 RTC */
immap->im_cpm.cp_pbdat |= PB_SPI_CE;
udelay (10);
/* Shift out the address (0) of the time in the Clock Chip */
soft_spi_send (0);
/* Put the clock readings into the rtc_time structure */
tmp->tm_sec = bcd2bin (soft_spi_read ()); /* Read seconds */
tmp->tm_min = bcd2bin (soft_spi_read ()); /* Read minutes */
/* Hours are trickier */
spi_byte = soft_spi_read (); /* Read Hours into temporary value */
if (spi_byte & 0x40) {
/* 12 hour mode bit is set (time is in 1-12 format) */
if (spi_byte & 0x20) {
/* since PM we add 11 to get 0-23 for hours */
tmp->tm_hour = (bcd2bin (spi_byte & 0x1F)) + 11;
} else {
/* since AM we subtract 1 to get 0-23 for hours */
tmp->tm_hour = (bcd2bin (spi_byte & 0x1F)) - 1;
}
} else {
/* Otherwise, 0-23 hour format */
tmp->tm_hour = (bcd2bin (spi_byte & 0x3F));
}
soft_spi_read (); /* Read and discard Day of week */
tmp->tm_mday = bcd2bin (soft_spi_read ()); /* Read Day of the Month */
tmp->tm_mon = bcd2bin (soft_spi_read ()); /* Read Month */
/* Read Year and convert to this century */
tmp->tm_year = bcd2bin (soft_spi_read ()) + 2000;
/* Now we can disable the DS1306 RTC */
immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */
udelay (10);
GregorianDay (tmp); /* Determine the day of week */
debug ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
return 0;
}
/*
* 函数名：Time_Adjust
* 描述 ：时间调节
* 输入 ：用于读取RTC时间的结构体指针
* 输出 ：无
* 调用 ：外部调用
*/
void Time_Adjust(struct rtc_time *tm)
{
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
/* Get time entred by the user on the hyperterminal */
Time_Regulate(tm);
/* Get wday */
GregorianDay(tm);
/* 修改当前RTC计数寄存器内容 */
RTC_SetCounter(mktimev(tm));
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
}
void maple_get_rtc_time(struct rtc_time *tm)
{
int uip, i;
/* The Linux interpretation of the CMOS clock register contents:
* When the Update-In-Progress (UIP) flag goes from 1 to 0, the
* RTC registers show the second which has precisely just started.
* Let's hope other operating systems interpret the RTC the same way.
*/
/* Since the UIP flag is set for about 2.2 ms and the clock
* is typically written with a precision of 1 jiffy, trying
* to obtain a precision better than a few milliseconds is
* an illusion. Only consistency is interesting, this also
* allows to use the routine for /dev/rtc without a potential
* 1 second kernel busy loop triggered by any reader of /dev/rtc.
*/
for (i = 0; i<1000000; i++) {
uip = maple_clock_read(RTC_FREQ_SELECT);
tm->tm_sec = maple_clock_read(RTC_SECONDS);
tm->tm_min = maple_clock_read(RTC_MINUTES);
tm->tm_hour = maple_clock_read(RTC_HOURS);
tm->tm_mday = maple_clock_read(RTC_DAY_OF_MONTH);
tm->tm_mon = maple_clock_read(RTC_MONTH);
tm->tm_year = maple_clock_read(RTC_YEAR);
uip |= maple_clock_read(RTC_FREQ_SELECT);
if ((uip & RTC_UIP)==0)
break;
}
if (!(maple_clock_read(RTC_CONTROL) & RTC_DM_BINARY)
|| RTC_ALWAYS_BCD) {
BCD_TO_BIN(tm->tm_sec);
BCD_TO_BIN(tm->tm_min);
BCD_TO_BIN(tm->tm_hour);
BCD_TO_BIN(tm->tm_mday);
BCD_TO_BIN(tm->tm_mon);
BCD_TO_BIN(tm->tm_year);
}
if ((tm->tm_year + 1900) < 1970)
tm->tm_year += 100;
GregorianDay(tm);
}
void to_tm(u32 tim, struct rtc_time * tm)
{
register u32 i;
register long hms, day;
day = tim / SECDAY;
hms = tim % SECDAY;
/* Hours, minutes, seconds are easy */
tm->tm_hour = hms / 3600;
tm->tm_min = (hms % 3600) / 60;
tm->tm_sec = (hms % 3600) % 60;
/* Number of years in days */ /*算出当前年份，起始的计数年份为1970年*/
for (i = STARTOFTIME; day >= days_in_year(i); i++) {
day -= days_in_year(i);
}
tm->tm_year = i;
/* Number of months in days left */ /*计算当前的月份*/
if (leapyear(tm->tm_year)) {
days_in_month(FEBRUARY) = 29;
}
for (i = 1; day >= days_in_month(i); i++) {
day -= days_in_month(i);
}
days_in_month(FEBRUARY) = 28;
tm->tm_mon = i;
/* Days are what is left over (+1) from all that. *//*计算当前日期*/
tm->tm_mday = day + 1;
/*
* Determine the day of week
*/
GregorianDay(tm);
}
int rtc_get(struct rtc_time *rtc)
{
uchar sec, min, hour, mday, month, year;
/* Reading counts register latches the current RTC calendar count.
* This guranties the coherence of the read during aprox 500 ms */
sec = rtc_read (DA9052_COUNTS_REG);
if (!(sec & DA9052_COUNTS_MONITOR)) {
puts("*** ERROR: " DEV_NAME " - incorrect date/time (Power was lost)\n");
}
min = rtc_read (DA9052_COUNTMI_REG);
hour = rtc_read (DA9052_COUNTH_REG);
mday = rtc_read (DA9052_COUNTD_REG);
month = rtc_read (DA9052_COUNTMO_REG);
year = rtc_read (DA9052_COUNTY_REG);
DBG ("Get RTC year: %02d mon: %02d mday: %02d "
"hr: %02d min: %02d sec: %02d\n",
year, month, mday, hour, min, sec);
rtc->tm_sec = sec & DA9052_COUNTS_COUNTSEC;
rtc->tm_min = min & DA9052_COUNTMI_COUNTMIN;
rtc->tm_hour = hour & DA9052_COUNTH_COUNTHOUR;
rtc->tm_mday = mday & DA9052_COUNTD_COUNTDAY;
rtc->tm_mon = month & DA9052_COUNTMO_COUNTMONTH;
rtc->tm_year = (year & DA9052_COUNTY_COUNTYEAR) + 2000;
/* Compute the the day of week, not available in the RTC registers */
GregorianDay(rtc);
DBG ("Get DATE: %4d-%02d-%02d TIME: %2d:%02d:%02d\n",
rtc->tm_year, rtc->tm_mon, rtc->tm_mday,
rtc->tm_hour, rtc->tm_min, rtc->tm_sec);
return 0;
}
/*
* Convert date string: MMDDhhmm[[CC]YY][.ss]
*
* Some basic checking for valid values is done, but this will not catch
* all possible error conditions.
*/
int mk_date (char *datestr, struct rtc_time *tmp)
{
int len, val;
char *ptr;
ptr = strchr (datestr,'.');
len = strlen (datestr);
/* Set seconds */
if (ptr) {
int sec;
*ptr++ = '\0';
if ((len - (ptr - datestr)) != 2)
return (-1);
len = strlen (datestr);
if (cnvrt2 (ptr, &sec))
return (-1);
tmp->tm_sec = sec;
} else {
tmp->tm_sec = 0;
}
if (len == 12) { /* MMDDhhmmCCYY */
int year, century;
if (cnvrt2 (datestr+ 8, ¢ury) ||
cnvrt2 (datestr+10, &year) ) {
return (-1);
}
tmp->tm_year = 100 * century + year;
} else if (len == 10) { /* MMDDhhmmYY */
int year, century;
century = tmp->tm_year / 100;
if (cnvrt2 (datestr+ 8, &year))
return (-1);
tmp->tm_year = 100 * century + year;
}
switch (len) {
case 8: /* MMDDhhmm */
/* fall thru */
case 10: /* MMDDhhmmYY */
/* fall thru */
case 12: /* MMDDhhmmCCYY */
if (cnvrt2 (datestr+0, &val) ||
val > 12) {
break;
}
tmp->tm_mon = val;
if (cnvrt2 (datestr+2, &val) ||
val > ((tmp->tm_mon==2) ? 29 : 31)) {
break;
}
tmp->tm_mday = val;
if (cnvrt2 (datestr+4, &val) ||
val > 23) {
break;
}
tmp->tm_hour = val;
if (cnvrt2 (datestr+6, &val) ||
val > 59) {
break;
}
tmp->tm_min = val;
/* calculate day of week */
GregorianDay (tmp);
return (0);
default:
break;
}
return (-1);
}
