/**
* @brief Configures the current time and date.
* @param None
* @retval None
*/
static void RTC_TimeStampConfig(void)
{
RTC_DateTypeDef sdatestructure;
RTC_TimeTypeDef stimestructure;
RTC_TamperTypeDef stamperstructure;
/*##-1- Configure the Tamper ###############################################*/
/* Configure Tamper registers */
/* RTC Tamper configured as follow:
- Pamper = Tamper1
- Pin selection = PC13
- Trigger = Falling Edge
- TimeStamp On Tamper Detection = Enable */
stamperstructure.Filter = RTC_TAMPERFILTER_DISABLE;
stamperstructure.Tamper = RTC_TAMPER_1;
stamperstructure.PinSelection = RTC_TAMPERPIN_PC13;
stamperstructure.Trigger = RTC_TAMPERTRIGGER_FALLINGEDGE;
stamperstructure.SamplingFrequency = RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096;
stamperstructure.PrechargeDuration = RTC_TAMPERPRECHARGEDURATION_1RTCCLK;
stamperstructure.TamperPullUp = RTC_TAMPER_PULLUP_DISABLE;
stamperstructure.TimeStampOnTamperDetection = RTC_TIMESTAMPONTAMPERDETECTION_ENABLE;
HAL_RTCEx_SetTamper(&RtcHandle, &stamperstructure);
/*##-2- Configure the Time Stamp peripheral ################################*/
/* RTC TimeStamp flag Generation: TimeStamp Rising Edge on PC13 Pin */
HAL_RTCEx_SetTimeStamp_IT(&RtcHandle, RTC_TIMESTAMPEDGE_RISING, RTC_TIMESTAMPPIN_PC13);
/* Clear the TIMESTAMP interrupt pending bit */
__HAL_RTC_TIMESTAMP_CLEAR_FLAG(&RtcHandle,RTC_FLAG_TSF);
/*##-3- Configure the Date #################################################*/
/* Set Date: Tuesday February 18th 2014 */
sdatestructure.Year = 0x14;
sdatestructure.Month = RTC_MONTH_FEBRUARY;
sdatestructure.Date = 0x18;
sdatestructure.WeekDay = RTC_WEEKDAY_TUESDAY;
if(HAL_RTC_SetDate(&RtcHandle,&sdatestructure,RTC_FORMAT_BCD) != HAL_OK)
{
/* Initialization Error */
Error_Handler();
}
/*##-4- Configure the Time #################################################*/
/* Set Time: 08:10:00 */
stimestructure.Hours = 0x08;
stimestructure.Minutes = 0x10;
stimestructure.Seconds = 0x00;
stimestructure.TimeFormat = RTC_HOURFORMAT12_AM;
stimestructure.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
stimestructure.StoreOperation = RTC_STOREOPERATION_RESET;
if(HAL_RTC_SetTime(&RtcHandle,&stimestructure,RTC_FORMAT_BCD) != HAL_OK)
{
/* Initialization Error */
Error_Handler();
}
}
/**
* @brief Configure the current time and date and activate timestamp.
* @param None
* @retval None
*/
static void RTC_TimeStampConfig(void)
{
RTC_DateTypeDef sdatestructure;
RTC_TimeTypeDef stimestructure;
/*##-1- Configure the Time Stamp peripheral ################################*/
/* RTC TimeStamp generation: TimeStamp Rising Edge on PC.13 Pin */
HAL_RTCEx_SetTimeStamp_IT(&RtcHandle, RTC_TIMESTAMPEDGE_RISING, RTC_TIMESTAMPPIN_PC13);
/*##-2- Configure the Date #################################################*/
/* Set Date: Monday April 14th 2014 */
sdatestructure.Year = 0x14;
sdatestructure.Month = RTC_MONTH_APRIL;
sdatestructure.Date = 0x14;
sdatestructure.WeekDay = RTC_WEEKDAY_MONDAY;
if(HAL_RTC_SetDate(&RtcHandle,&sdatestructure, RTC_FORMAT_BCD) != HAL_OK)
{
/* Initialization Error */
Error_Handler();
}
/*##-3- Configure the Time #################################################*/
/* Set Time: 08:10:00 */
stimestructure.Hours = 0x08;
stimestructure.Minutes = 0x10;
stimestructure.Seconds = 0x00;
stimestructure.SubSeconds = 0x00;
stimestructure.TimeFormat = RTC_HOURFORMAT12_AM;
stimestructure.DayLightSaving = RTC_DAYLIGHTSAVING_NONE ;
stimestructure.StoreOperation = RTC_STOREOPERATION_RESET;
if(HAL_RTC_SetTime(&RtcHandle,&stimestructure, RTC_FORMAT_BCD) != HAL_OK)
{
/* Initialization Error */
Error_Handler();
}
}
/**
* @brief RTC Time stamp configuration function
* @param TSpinEdgeSel Select the rising edge or falling edge
* @arg RTC_TIMESTAMPEDGE_RISING
* @arg RTC_TIMESTAMPEDGE_FALLING
*
* NOTE Time stamp event generated on the PC13 GPIO pin by apply
*/
void BSP_RTC_TimeStamp_Init(uint8_t TsPinEdgeSel)
{
HAL_RTCEx_SetTimeStamp_IT(&hrtc_bsp, TsPinEdgeSel, RTC_TIMESTAMPPIN_PC13);
}