/*
* Return the phy mode for with the specified channel so the
* caller can select a rate set. This is problematic and the
* work here assumes how things work elsewhere in this code.
*
* XXX never returns turbo modes -dcy
*/
enum ieee80211_phymode
ieee80211_chan2mode(struct ieee80211com *ic,
const struct ieee80211_channel *chan)
{
/*
* NB: this assumes the channel would not be supplied to us
* unless it was already compatible with the current mode.
*/
if (ic->ic_curmode != IEEE80211_MODE_AUTO ||
chan == IEEE80211_CHAN_ANYC)
return ic->ic_curmode;
/*
* In autoselect mode; deduce a mode based on the channel
* characteristics. We assume that turbo-only channels
* are not considered when the channel set is constructed.
*/
if (IEEE80211_IS_CHAN_T(chan))
return IEEE80211_MODE_TURBO;
else if (IEEE80211_IS_CHAN_5GHZ(chan))
return IEEE80211_MODE_11A;
else if (chan->ic_flags & (IEEE80211_CHAN_OFDM|IEEE80211_CHAN_DYN))
return IEEE80211_MODE_11G;
else
return IEEE80211_MODE_11B;
}
void
ieee80211_channel_init(struct ifnet *ifp)
{
struct ieee80211com *ic = (void *)ifp;
struct ieee80211_channel *c;
int i;
/*
* Fill in 802.11 available channel set, mark
* all available channels as active, and pick
* a default channel if not already specified.
*/
memset(ic->ic_chan_avail, 0, sizeof(ic->ic_chan_avail));
ic->ic_modecaps |= 1<<IEEE80211_MODE_AUTO;
for (i = 0; i <= IEEE80211_CHAN_MAX; i++) {
c = &ic->ic_channels[i];
if (c->ic_flags) {
/*
* Verify driver passed us valid data.
*/
if (i != ieee80211_chan2ieee(ic, c)) {
printf("%s: bad channel ignored; "
"freq %u flags %x number %u\n",
ifp->if_xname, c->ic_freq, c->ic_flags,
i);
c->ic_flags = 0; /* NB: remove */
continue;
}
setbit(ic->ic_chan_avail, i);
/*
* Identify mode capabilities.
*/
if (IEEE80211_IS_CHAN_A(c))
ic->ic_modecaps |= 1<<IEEE80211_MODE_11A;
if (IEEE80211_IS_CHAN_B(c))
ic->ic_modecaps |= 1<<IEEE80211_MODE_11B;
if (IEEE80211_IS_CHAN_PUREG(c))
ic->ic_modecaps |= 1<<IEEE80211_MODE_11G;
if (IEEE80211_IS_CHAN_T(c))
ic->ic_modecaps |= 1<<IEEE80211_MODE_TURBO;
}
}
/* validate ic->ic_curmode */
if ((ic->ic_modecaps & (1<<ic->ic_curmode)) == 0)
ic->ic_curmode = IEEE80211_MODE_AUTO;
ic->ic_des_chan = IEEE80211_CHAN_ANYC; /* any channel is ok */
ic->ic_scan_lock = IEEE80211_SCAN_UNLOCKED;
}
/*
* Return the phy mode for with the specified channel so the
* caller can select a rate set. This is problematic for channels
* where multiple operating modes are possible (e.g. 11g+11b).
* In those cases we defer to the current operating mode when set.
*/
enum ieee80211_phymode
ieee80211_chan2mode(struct ieee80211com *ic, struct ieee80211_channel *chan)
{
if (IEEE80211_IS_CHAN_T(chan)) {
return IEEE80211_MODE_TURBO_A;
} else if (IEEE80211_IS_CHAN_5GHZ(chan)) {
return IEEE80211_MODE_11A;
} else if (IEEE80211_IS_CHAN_FHSS(chan))
return IEEE80211_MODE_FH;
else if (chan->ic_flags & (IEEE80211_CHAN_OFDM|IEEE80211_CHAN_DYN)) {
/*
* This assumes all 11g channels are also usable
* for 11b, which is currently true.
*/
if (ic->ic_curmode == IEEE80211_MODE_TURBO_G)
return IEEE80211_MODE_TURBO_G;
if (ic->ic_curmode == IEEE80211_MODE_11B)
return IEEE80211_MODE_11B;
return IEEE80211_MODE_11G;
} else
return IEEE80211_MODE_11B;
}
void
ieee80211_ifattach(struct ieee80211com *ic)
{
struct ifnet *ifp = ic->ic_ifp;
struct ieee80211_channel *c;
int i;
#ifdef __NetBSD__
ieee80211_init();
#endif /* __NetBSD__ */
ether_ifattach(ifp, ic->ic_myaddr);
bpf_attach2(ifp, DLT_IEEE802_11,
sizeof(struct ieee80211_frame_addr4), &ic->ic_rawbpf);
ieee80211_crypto_attach(ic);
/*
* Fill in 802.11 available channel set, mark
* all available channels as active, and pick
* a default channel if not already specified.
*/
memset(ic->ic_chan_avail, 0, sizeof(ic->ic_chan_avail));
ic->ic_modecaps |= 1<<IEEE80211_MODE_AUTO;
for (i = 0; i <= IEEE80211_CHAN_MAX; i++) {
c = &ic->ic_channels[i];
if (c->ic_flags) {
/*
* Verify driver passed us valid data.
*/
if (i != ieee80211_chan2ieee(ic, c)) {
if_printf(ifp, "bad channel ignored; "
"freq %u flags %x number %u\n",
c->ic_freq, c->ic_flags, i);
c->ic_flags = 0; /* NB: remove */
continue;
}
setbit(ic->ic_chan_avail, i);
/*
* Identify mode capabilities.
*/
if (IEEE80211_IS_CHAN_A(c))
ic->ic_modecaps |= 1<<IEEE80211_MODE_11A;
if (IEEE80211_IS_CHAN_B(c))
ic->ic_modecaps |= 1<<IEEE80211_MODE_11B;
if (IEEE80211_IS_CHAN_PUREG(c))
ic->ic_modecaps |= 1<<IEEE80211_MODE_11G;
if (IEEE80211_IS_CHAN_FHSS(c))
ic->ic_modecaps |= 1<<IEEE80211_MODE_FH;
if (IEEE80211_IS_CHAN_T(c))
ic->ic_modecaps |= 1<<IEEE80211_MODE_TURBO_A;
if (IEEE80211_IS_CHAN_108G(c))
ic->ic_modecaps |= 1<<IEEE80211_MODE_TURBO_G;
if (ic->ic_curchan == NULL) {
/* arbitrarily pick the first channel */
ic->ic_curchan = &ic->ic_channels[i];
}
}
}
/* validate ic->ic_curmode */
if ((ic->ic_modecaps & (1<<ic->ic_curmode)) == 0)
ic->ic_curmode = IEEE80211_MODE_AUTO;
ic->ic_des_chan = IEEE80211_CHAN_ANYC; /* any channel is ok */
#if 0
/*
* Enable WME by default if we're capable.
*/
if (ic->ic_caps & IEEE80211_C_WME)
ic->ic_flags |= IEEE80211_F_WME;
#endif
(void) ieee80211_setmode(ic, ic->ic_curmode);
if (ic->ic_bintval == 0)
ic->ic_bintval = IEEE80211_BINTVAL_DEFAULT;
ic->ic_bmisstimeout = 7*ic->ic_bintval; /* default 7 beacons */
ic->ic_dtim_period = IEEE80211_DTIM_DEFAULT;
IEEE80211_BEACON_LOCK_INIT(ic, "beacon");
if (ic->ic_lintval == 0)
ic->ic_lintval = ic->ic_bintval;
ic->ic_txpowlimit = IEEE80211_TXPOWER_MAX;
LIST_INSERT_HEAD(&ieee80211com_head, ic, ic_list);
ieee80211_node_attach(ic);
ieee80211_proto_attach(ic);
ieee80211_add_vap(ic);
ieee80211_sysctl_attach(ic); /* NB: requires ic_vap */
/*
* Install a default reset method for the ioctl support.
* The driver is expected to fill this in before calling us.
*/
if (ic->ic_reset == NULL)
ic->ic_reset = ieee80211_default_reset;
}
void
ieee80211_ifattach(struct ifnet *ifp)
{
struct ieee80211com *ic = (void *)ifp;
struct ieee80211_channel *c;
int i;
memcpy(((struct arpcom *)ifp)->ac_enaddr, ic->ic_myaddr,
ETHER_ADDR_LEN);
ether_ifattach(ifp);
ifp->if_output = ieee80211_output;
#if NBPFILTER > 0
bpfattach(&ic->ic_rawbpf, ifp, DLT_IEEE802_11,
sizeof(struct ieee80211_frame_addr4));
#endif
ieee80211_crypto_attach(ifp);
/*
* Fill in 802.11 available channel set, mark
* all available channels as active, and pick
* a default channel if not already specified.
*/
memset(ic->ic_chan_avail, 0, sizeof(ic->ic_chan_avail));
ic->ic_modecaps |= 1<<IEEE80211_MODE_AUTO;
for (i = 0; i <= IEEE80211_CHAN_MAX; i++) {
c = &ic->ic_channels[i];
if (c->ic_flags) {
/*
* Verify driver passed us valid data.
*/
if (i != ieee80211_chan2ieee(ic, c)) {
printf("%s: bad channel ignored; "
"freq %u flags %x number %u\n",
ifp->if_xname, c->ic_freq, c->ic_flags,
i);
c->ic_flags = 0; /* NB: remove */
continue;
}
setbit(ic->ic_chan_avail, i);
/*
* Identify mode capabilities.
*/
if (IEEE80211_IS_CHAN_A(c))
ic->ic_modecaps |= 1<<IEEE80211_MODE_11A;
if (IEEE80211_IS_CHAN_B(c))
ic->ic_modecaps |= 1<<IEEE80211_MODE_11B;
if (IEEE80211_IS_CHAN_PUREG(c))
ic->ic_modecaps |= 1<<IEEE80211_MODE_11G;
if (IEEE80211_IS_CHAN_T(c))
ic->ic_modecaps |= 1<<IEEE80211_MODE_TURBO;
}
}
/* validate ic->ic_curmode */
if ((ic->ic_modecaps & (1<<ic->ic_curmode)) == 0)
ic->ic_curmode = IEEE80211_MODE_AUTO;
ic->ic_des_chan = IEEE80211_CHAN_ANYC; /* any channel is ok */
ic->ic_scan_lock = IEEE80211_SCAN_UNLOCKED;
/* IEEE 802.11 defines a MTU >= 2290 */
ifp->if_capabilities |= IFCAP_VLAN_MTU;
ieee80211_setbasicrates(ic);
(void)ieee80211_setmode(ic, ic->ic_curmode);
if (ic->ic_lintval == 0)
ic->ic_lintval = 100; /* default sleep */
ic->ic_bmisstimeout = 7*ic->ic_lintval; /* default 7 beacons */
ic->ic_dtim_period = 1; /* all TIMs are DTIMs */
LIST_INSERT_HEAD(&ieee80211com_head, ic, ic_list);
ieee80211_node_attach(ifp);
ieee80211_proto_attach(ifp);
if_addgroup(ifp, "wlan");
ifp->if_priority = IF_WIRELESS_DEFAULT_PRIORITY;
}
void
ieee80211_ifattach(struct ifnet *ifp)
{
struct ieee80211com *ic = (void *)ifp;
struct ieee80211_channel *c;
int i;
ether_ifattach(ifp, ic->ic_myaddr);
#if NBPFILTER > 0
bpfattach2(ifp, DLT_IEEE802_11,
sizeof(struct ieee80211_frame_addr4), &ic->ic_rawbpf);
#endif
ieee80211_crypto_attach(ifp);
/*
* Fill in 802.11 available channel set, mark
* all available channels as active, and pick
* a default channel if not already specified.
*/
memset(ic->ic_chan_avail, 0, sizeof(ic->ic_chan_avail));
ic->ic_modecaps |= 1<<IEEE80211_MODE_AUTO;
for (i = 0; i <= IEEE80211_CHAN_MAX; i++) {
c = &ic->ic_channels[i];
if (c->ic_flags) {
/*
* Verify driver passed us valid data.
*/
if (i != ieee80211_chan2ieee(ic, c)) {
if_printf(ifp, "bad channel ignored; "
"freq %u flags %x number %u\n",
c->ic_freq, c->ic_flags, i);
c->ic_flags = 0; /* NB: remove */
continue;
}
setbit(ic->ic_chan_avail, i);
/*
* Identify mode capabilities.
*/
if (IEEE80211_IS_CHAN_A(c))
ic->ic_modecaps |= 1<<IEEE80211_MODE_11A;
if (IEEE80211_IS_CHAN_B(c))
ic->ic_modecaps |= 1<<IEEE80211_MODE_11B;
if (IEEE80211_IS_CHAN_PUREG(c))
ic->ic_modecaps |= 1<<IEEE80211_MODE_11G;
if (IEEE80211_IS_CHAN_FHSS(c))
ic->ic_modecaps |= 1<<IEEE80211_MODE_FH;
if (IEEE80211_IS_CHAN_T(c))
ic->ic_modecaps |= 1<<IEEE80211_MODE_TURBO;
}
}
/* validate ic->ic_curmode */
if ((ic->ic_modecaps & (1<<ic->ic_curmode)) == 0)
ic->ic_curmode = IEEE80211_MODE_AUTO;
ieee80211_setbasicrates(ic);
(void) ieee80211_setmode(ic, ic->ic_curmode);
ic->ic_des_chan = IEEE80211_CHAN_ANYC; /* any channel is ok */
if (ic->ic_lintval == 0)
ic->ic_lintval = 100; /* default sleep */
ic->ic_bmisstimeout = 7*ic->ic_lintval; /* default 7 beacons */
ieee80211_node_attach(ifp);
ieee80211_proto_attach(ifp);
}
