/* Need to Pull PLLON low when writing channel registers through
* 3-wire interface
*/
static bool s_bAL7230SelectChannel(struct vnt_private *priv, unsigned char byChannel)
{
void __iomem *iobase = priv->PortOffset;
bool ret;
ret = true;
/* PLLON Off */
MACvWordRegBitsOff(iobase, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE3);
ret &= IFRFbWriteEmbedded(priv, dwAL7230ChannelTable0[byChannel - 1]);
ret &= IFRFbWriteEmbedded(priv, dwAL7230ChannelTable1[byChannel - 1]);
ret &= IFRFbWriteEmbedded(priv, dwAL7230ChannelTable2[byChannel - 1]);
/* PLLOn On */
MACvWordRegBitsOn(iobase, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE3);
/* Set Channel[7] = 0 to tell H/W channel is changing now. */
VNSvOutPortB(iobase + MAC_REG_CHANNEL, (byChannel & 0x7F));
MACvTimer0MicroSDelay(priv, SWITCH_CHANNEL_DELAY_AL7230);
/* Set Channel[7] = 1 to tell H/W channel change is done. */
VNSvOutPortB(iobase + MAC_REG_CHANNEL, (byChannel | 0x80));
return ret;
}
bool RFbAL2230SelectChannel(unsigned long dwIoBase, unsigned char byChannel)
{
bool bResult;
bResult = true;
bResult &= IFRFbWriteEmbedded(dwIoBase, dwAL2230ChannelTable0[byChannel - 1]);
bResult &= IFRFbWriteEmbedded(dwIoBase, dwAL2230ChannelTable1[byChannel - 1]);
// Set Channel[7] = 0 to tell H/W channel is changing now.
VNSvOutPortB(dwIoBase + MAC_REG_CHANNEL, (byChannel & 0x7F));
MACvTimer0MicroSDelay(dwIoBase, SWITCH_CHANNEL_DELAY_AL2230);
// Set Channel[7] = 1 to tell H/W channel change is done.
VNSvOutPortB(dwIoBase + MAC_REG_CHANNEL, (byChannel | 0x80));
return bResult;
}
/*
* Description: AIROHA IFRF chip init function
*
* Parameters:
* In:
* dwIoBase - I/O base address
* Out:
* none
*
* Return Value: true if succeeded; false if failed.
*
*/
bool RFbAL2230Init(unsigned long dwIoBase)
{
int ii;
bool bResult;
bResult = true;
//3-wire control for normal mode
VNSvOutPortB(dwIoBase + MAC_REG_SOFTPWRCTL, 0);
MACvWordRegBitsOn(dwIoBase, MAC_REG_SOFTPWRCTL, (SOFTPWRCTL_SWPECTI |
SOFTPWRCTL_TXPEINV));
//2008-8-21 chester <add>
// PLL Off
MACvWordRegBitsOff(dwIoBase, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE3);
//patch abnormal AL2230 frequency output
//2008-8-21 chester <add>
IFRFbWriteEmbedded(dwIoBase, (0x07168700+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW));
for (ii = 0; ii < CB_AL2230_INIT_SEQ; ii++)
bResult &= IFRFbWriteEmbedded(dwIoBase, dwAL2230InitTable[ii]);
//2008-8-21 chester <add>
MACvTimer0MicroSDelay(dwIoBase, 30); //delay 30 us
// PLL On
MACvWordRegBitsOn(dwIoBase, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE3);
MACvTimer0MicroSDelay(dwIoBase, 150);//150us
bResult &= IFRFbWriteEmbedded(dwIoBase, (0x00d80f00+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW));
MACvTimer0MicroSDelay(dwIoBase, 30);//30us
bResult &= IFRFbWriteEmbedded(dwIoBase, (0x00780f00+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW));
MACvTimer0MicroSDelay(dwIoBase, 30);//30us
bResult &= IFRFbWriteEmbedded(dwIoBase, dwAL2230InitTable[CB_AL2230_INIT_SEQ-1]);
MACvWordRegBitsOn(dwIoBase, MAC_REG_SOFTPWRCTL, (SOFTPWRCTL_SWPE3 |
SOFTPWRCTL_SWPE2 |
SOFTPWRCTL_SWPECTI |
SOFTPWRCTL_TXPEINV));
//3-wire control for power saving mode
VNSvOutPortB(dwIoBase + MAC_REG_PSPWRSIG, (PSSIG_WPE3 | PSSIG_WPE2)); //1100 0000
return bResult;
}
/*
* Description: AIROHA IFRF chip init function
*
* Parameters:
* In:
* iobase - I/O base address
* Out:
* none
*
* Return Value: true if succeeded; false if failed.
*
*/
static bool s_bAL7230Init(struct vnt_private *priv)
{
void __iomem *iobase = priv->PortOffset;
int ii;
bool ret;
ret = true;
/* 3-wire control for normal mode */
VNSvOutPortB(iobase + MAC_REG_SOFTPWRCTL, 0);
MACvWordRegBitsOn(iobase, MAC_REG_SOFTPWRCTL, (SOFTPWRCTL_SWPECTI |
SOFTPWRCTL_TXPEINV));
BBvPowerSaveModeOFF(priv); /* RobertYu:20050106, have DC value for Calibration */
for (ii = 0; ii < CB_AL7230_INIT_SEQ; ii++)
ret &= IFRFbWriteEmbedded(priv, dwAL7230InitTable[ii]);
/* PLL On */
MACvWordRegBitsOn(iobase, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE3);
/* Calibration */
MACvTimer0MicroSDelay(priv, 150);/* 150us */
/* TXDCOC:active, RCK:disable */
ret &= IFRFbWriteEmbedded(priv, (0x9ABA8F00 + (BY_AL7230_REG_LEN << 3) + IFREGCTL_REGW));
MACvTimer0MicroSDelay(priv, 30);/* 30us */
/* TXDCOC:disable, RCK:active */
ret &= IFRFbWriteEmbedded(priv, (0x3ABA8F00 + (BY_AL7230_REG_LEN << 3) + IFREGCTL_REGW));
MACvTimer0MicroSDelay(priv, 30);/* 30us */
/* TXDCOC:disable, RCK:disable */
ret &= IFRFbWriteEmbedded(priv, dwAL7230InitTable[CB_AL7230_INIT_SEQ-1]);
MACvWordRegBitsOn(iobase, MAC_REG_SOFTPWRCTL, (SOFTPWRCTL_SWPE3 |
SOFTPWRCTL_SWPE2 |
SOFTPWRCTL_SWPECTI |
SOFTPWRCTL_TXPEINV));
BBvPowerSaveModeON(priv); /* RobertYu:20050106 */
/* PE1: TX_ON, PE2: RX_ON, PE3: PLLON */
/* 3-wire control for power saving mode */
VNSvOutPortB(iobase + MAC_REG_PSPWRSIG, (PSSIG_WPE3 | PSSIG_WPE2)); /* 1100 0000 */
return ret;
}
static bool RFbAL2230SelectChannel(struct vnt_private *priv, unsigned char byChannel)
{
void __iomem *iobase = priv->PortOffset;
bool ret;
ret = true;
ret &= IFRFbWriteEmbedded(priv, dwAL2230ChannelTable0[byChannel - 1]);
ret &= IFRFbWriteEmbedded(priv, dwAL2230ChannelTable1[byChannel - 1]);
/* Set Channel[7] = 0 to tell H/W channel is changing now. */
VNSvOutPortB(iobase + MAC_REG_CHANNEL, (byChannel & 0x7F));
MACvTimer0MicroSDelay(priv, SWITCH_CHANNEL_DELAY_AL2230);
/* Set Channel[7] = 1 to tell H/W channel change is done. */
VNSvOutPortB(iobase + MAC_REG_CHANNEL, (byChannel | 0x80));
return ret;
}
bool RFbRawSetPower(
struct vnt_private *priv,
unsigned char byPwr,
unsigned int rate
)
{
bool ret = true;
unsigned long dwMax7230Pwr = 0;
if (byPwr >= priv->byMaxPwrLevel)
return false;
switch (priv->byRFType) {
case RF_AIROHA:
ret &= IFRFbWriteEmbedded(priv, dwAL2230PowerTable[byPwr]);
if (rate <= RATE_11M)
ret &= IFRFbWriteEmbedded(priv, 0x0001B400 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW);
else
ret &= IFRFbWriteEmbedded(priv, 0x0005A400 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW);
break;
case RF_AL2230S:
ret &= IFRFbWriteEmbedded(priv, dwAL2230PowerTable[byPwr]);
if (rate <= RATE_11M) {
ret &= IFRFbWriteEmbedded(priv, 0x040C1400 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW);
ret &= IFRFbWriteEmbedded(priv, 0x00299B00 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW);
} else {
ret &= IFRFbWriteEmbedded(priv, 0x0005A400 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW);
ret &= IFRFbWriteEmbedded(priv, 0x00099B00 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW);
}
break;
case RF_AIROHA7230:
/* 0x080F1B00 for 3 wire control TxGain(D10)
* and 0x31 as TX Gain value
*/
dwMax7230Pwr = 0x080C0B00 | ((byPwr) << 12) |
(BY_AL7230_REG_LEN << 3) | IFREGCTL_REGW;
ret &= IFRFbWriteEmbedded(priv, dwMax7230Pwr);
break;
default:
break;
}
return ret;
}
/*
* Description: AIROHA IFRF chip init function
*
* Parameters:
* In:
* iobase - I/O base address
* Out:
* none
*
* Return Value: true if succeeded; false if failed.
*
*/
static bool RFbAL2230Init(struct vnt_private *priv)
{
void __iomem *iobase = priv->PortOffset;
int ii;
bool ret;
ret = true;
/* 3-wire control for normal mode */
VNSvOutPortB(iobase + MAC_REG_SOFTPWRCTL, 0);
MACvWordRegBitsOn(iobase, MAC_REG_SOFTPWRCTL, (SOFTPWRCTL_SWPECTI |
SOFTPWRCTL_TXPEINV));
/* PLL Off */
MACvWordRegBitsOff(iobase, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE3);
/* patch abnormal AL2230 frequency output */
IFRFbWriteEmbedded(priv, (0x07168700 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW));
for (ii = 0; ii < CB_AL2230_INIT_SEQ; ii++)
ret &= IFRFbWriteEmbedded(priv, dwAL2230InitTable[ii]);
MACvTimer0MicroSDelay(priv, 30); /* delay 30 us */
/* PLL On */
MACvWordRegBitsOn(iobase, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE3);
MACvTimer0MicroSDelay(priv, 150);/* 150us */
ret &= IFRFbWriteEmbedded(priv, (0x00d80f00 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW));
MACvTimer0MicroSDelay(priv, 30);/* 30us */
ret &= IFRFbWriteEmbedded(priv, (0x00780f00 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW));
MACvTimer0MicroSDelay(priv, 30);/* 30us */
ret &= IFRFbWriteEmbedded(priv, dwAL2230InitTable[CB_AL2230_INIT_SEQ-1]);
MACvWordRegBitsOn(iobase, MAC_REG_SOFTPWRCTL, (SOFTPWRCTL_SWPE3 |
SOFTPWRCTL_SWPE2 |
SOFTPWRCTL_SWPECTI |
SOFTPWRCTL_TXPEINV));
/* 3-wire control for power saving mode */
VNSvOutPortB(iobase + MAC_REG_PSPWRSIG, (PSSIG_WPE3 | PSSIG_WPE2)); /* 1100 0000 */
return ret;
}
/*
* Description: AIROHA IFRF chip init function
*
* Parameters:
* In:
* dwIoBase - I/O base address
* Out:
* none
*
* Return Value: true if succeeded; false if failed.
*
*/
bool s_bAL7230Init(unsigned long dwIoBase)
{
int ii;
bool bResult;
bResult = true;
//3-wire control for normal mode
VNSvOutPortB(dwIoBase + MAC_REG_SOFTPWRCTL, 0);
MACvWordRegBitsOn(dwIoBase, MAC_REG_SOFTPWRCTL, (SOFTPWRCTL_SWPECTI |
SOFTPWRCTL_TXPEINV));
BBvPowerSaveModeOFF(dwIoBase); //RobertYu:20050106, have DC value for Calibration
for (ii = 0; ii < CB_AL7230_INIT_SEQ; ii++)
bResult &= IFRFbWriteEmbedded(dwIoBase, dwAL7230InitTable[ii]);
// PLL On
MACvWordRegBitsOn(dwIoBase, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE3);
//Calibration
MACvTimer0MicroSDelay(dwIoBase, 150);//150us
bResult &= IFRFbWriteEmbedded(dwIoBase, (0x9ABA8F00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW)); //TXDCOC:active, RCK:disable
MACvTimer0MicroSDelay(dwIoBase, 30);//30us
bResult &= IFRFbWriteEmbedded(dwIoBase, (0x3ABA8F00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW)); //TXDCOC:disable, RCK:active
MACvTimer0MicroSDelay(dwIoBase, 30);//30us
bResult &= IFRFbWriteEmbedded(dwIoBase, dwAL7230InitTable[CB_AL7230_INIT_SEQ-1]); //TXDCOC:disable, RCK:disable
MACvWordRegBitsOn(dwIoBase, MAC_REG_SOFTPWRCTL, (SOFTPWRCTL_SWPE3 |
SOFTPWRCTL_SWPE2 |
SOFTPWRCTL_SWPECTI |
SOFTPWRCTL_TXPEINV));
BBvPowerSaveModeON(dwIoBase); // RobertYu:20050106
// PE1: TX_ON, PE2: RX_ON, PE3: PLLON
//3-wire control for power saving mode
VNSvOutPortB(dwIoBase + MAC_REG_PSPWRSIG, (PSSIG_WPE3 | PSSIG_WPE2)); //1100 0000
return bResult;
}
// Need to Pull PLLON low when writing channel registers through 3-wire interface
bool s_bAL7230SelectChannel(unsigned long dwIoBase, unsigned char byChannel)
{
bool bResult;
bResult = true;
// PLLON Off
MACvWordRegBitsOff(dwIoBase, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE3);
bResult &= IFRFbWriteEmbedded(dwIoBase, dwAL7230ChannelTable0[byChannel - 1]); //Reg0
bResult &= IFRFbWriteEmbedded(dwIoBase, dwAL7230ChannelTable1[byChannel - 1]); //Reg1
bResult &= IFRFbWriteEmbedded(dwIoBase, dwAL7230ChannelTable2[byChannel - 1]); //Reg4
// PLLOn On
MACvWordRegBitsOn(dwIoBase, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE3);
// Set Channel[7] = 0 to tell H/W channel is changing now.
VNSvOutPortB(dwIoBase + MAC_REG_CHANNEL, (byChannel & 0x7F));
MACvTimer0MicroSDelay(dwIoBase, SWITCH_CHANNEL_DELAY_AL7230);
// Set Channel[7] = 1 to tell H/W channel change is done.
VNSvOutPortB(dwIoBase + MAC_REG_CHANNEL, (byChannel | 0x80));
return bResult;
}
/*
* Description: RF ShutDown function
*
* Parameters:
* In:
* byBBType
* byRFType
* Out:
* none
*
* Return Value: true if succeeded; false if failed.
*
*/
bool RFbShutDown(
PSDevice pDevice
)
{
bool bResult = true;
switch (pDevice->byRFType) {
case RF_AIROHA7230:
bResult = IFRFbWriteEmbedded(pDevice->PortOffset, 0x1ABAEF00 + (BY_AL7230_REG_LEN << 3) + IFREGCTL_REGW);
break;
default:
bResult = true;
break;
}
return bResult;
}
bool RFbRawSetPower(
PSDevice pDevice,
unsigned char byPwr,
unsigned int uRATE
)
{
bool bResult = true;
unsigned long dwMax7230Pwr = 0;
if (byPwr >= pDevice->byMaxPwrLevel) {
return false;
}
switch (pDevice->byRFType) {
case RF_AIROHA:
bResult &= IFRFbWriteEmbedded(pDevice->PortOffset, dwAL2230PowerTable[byPwr]);
if (uRATE <= RATE_11M) {
bResult &= IFRFbWriteEmbedded(pDevice->PortOffset, 0x0001B
/* Post processing for the 11b/g and 11a.
* for save time on changing Reg2,3,5,7,10,12,15
*/
bool RFbAL7230SelectChannelPostProcess(struct vnt_private *priv,
u16 byOldChannel,
u16 byNewChannel)
{
bool ret;
ret = true;
/* if change between 11 b/g and 11a need to update the following
* register
* Channel Index 1~14
*/
if ((byOldChannel <= CB_MAX_CHANNEL_24G) && (byNewChannel > CB_MAX_CHANNEL_24G)) {
/* Change from 2.4G to 5G [Reg] */
ret &= IFRFbWriteEmbedded(priv, dwAL7230InitTableAMode[2]);
ret &= IFRFbWriteEmbedded(priv, dwAL7230InitTableAMode[3]);
ret &= IFRFbWriteEmbedded(priv, dwAL7230InitTableAMode[5]);
ret &= IFRFbWriteEmbedded(priv, dwAL7230InitTableAMode[7]);
ret &= IFRFbWriteEmbedded(priv, dwAL7230InitTableAMode[10]);
ret &= IFRFbWriteEmbedded(priv, dwAL7230InitTableAMode[12]);
ret &= IFRFbWriteEmbedded(priv, dwAL7230InitTableAMode[15]);
} else if ((byOldChannel > CB_MAX_CHANNEL_24G) && (byNewChannel <= CB_MAX_CHANNEL_24G)) {
/* Change from 5G to 2.4G [Reg] */
ret &= IFRFbWriteEmbedded(priv, dwAL7230InitTable[2]);
ret &= IFRFbWriteEmbedded(priv, dwAL7230InitTable[3]);
ret &= IFRFbWriteEmbedded(priv, dwAL7230InitTable[5]);
ret &= IFRFbWriteEmbedded(priv, dwAL7230InitTable[7]);
ret &= IFRFbWriteEmbedded(priv, dwAL7230InitTable[10]);
ret &= IFRFbWriteEmbedded(priv, dwAL7230InitTable[12]);
ret &= IFRFbWriteEmbedded(priv, dwAL7230InitTable[15]);
}
return ret;
}
int RFbRawSetPower(struct vnt_private *pDevice, u8 byPwr, u32 uRATE)
{
int bResult = TRUE;
if (pDevice->byCurPwr == byPwr)
return TRUE;
pDevice->byCurPwr = byPwr;
switch (pDevice->byRFType) {
case RF_AL2230 :
if (pDevice->byCurPwr >= AL2230_PWR_IDX_LEN)
return FALSE;
bResult &= IFRFbWriteEmbedded(pDevice, dwAL2230PowerTable[pDevice->byCurPwr]);
if (uRATE <= RATE_11M)
bResult &= IFRFbWriteEmbedded(pDevice, 0x0001B400+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
else
bResult &= IFRFbWriteEmbedded(pDevice, 0x0005A400+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
break;
case RF_AL2230S :
if (pDevice->byCurPwr >= AL2230_PWR_IDX_LEN)
return FALSE;
bResult &= IFRFbWriteEmbedded(pDevice, dwAL2230PowerTable[pDevice->byCurPwr]);
if (uRATE <= RATE_11M) {
bResult &= IFRFbWriteEmbedded(pDevice, 0x040C1400+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
bResult &= IFRFbWriteEmbedded(pDevice, 0x00299B00+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
}else {
bResult &= IFRFbWriteEmbedded(pDevice, 0x0005A400+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
bResult &= IFRFbWriteEmbedded(pDevice, 0x00099B00+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW);
}
break;
case RF_AIROHA7230:
{
DWORD dwMax7230Pwr;
if (uRATE <= RATE_11M) { //RobertYu:20060426, for better 11b mask
bResult &= IFRFbWriteEmbedded(pDevice, 0x111BB900+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW);
}
else {
bResult &= IFRFbWriteEmbedded(pDevice, 0x221BB900+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW);
}
if (pDevice->byCurPwr > AL7230_PWR_IDX_LEN) return FALSE;
// 0x080F1B00 for 3 wire control TxGain(D10) and 0x31 as TX Gain value
dwMax7230Pwr = 0x080C0B00 | ( (pDevice->byCurPwr) << 12 ) |
(BY_AL7230_REG_LEN << 3 ) | IFREGCTL_REGW;
bResult &= IFRFbWriteEmbedded(pDevice, dwMax7230Pwr);
break;
}
break;
case RF_VT3226: //RobertYu:20051111, VT3226C0 and before
{
DWORD dwVT3226Pwr;
if (pDevice->byCurPwr >= VT3226_PWR_IDX_LEN)
return FALSE;
dwVT3226Pwr = ((0x3F-pDevice->byCurPwr) << 20 ) | ( 0x17 << 8 ) /* Reg7 */ |
(BY_VT3226_REG_LEN << 3 ) | IFREGCTL_REGW;
bResult &= IFRFbWriteEmbedded(pDevice, dwVT3226Pwr);
break;
}
case RF_VT3226D0: //RobertYu:20051228
{
DWORD dwVT3226Pwr;
if (pDevice->byCurPwr >= VT3226_PWR_IDX_LEN)
return FALSE;
if (uRATE <= RATE_11M) {
dwVT3226Pwr = ((0x3F-pDevice->byCurPwr) << 20 ) | ( 0xE07 << 8 ) /* Reg7 */ | //RobertYu:20060420, TWIF 1.10
(BY_VT3226_REG_LEN << 3 ) | IFREGCTL_REGW;
bResult &= IFRFbWriteEmbedded(pDevice, dwVT3226Pwr);
bResult &= IFRFbWriteEmbedded(pDevice, 0x03C6A200+(BY_VT3226_REG_LEN<<3)+IFREGCTL_REGW);
if (pDevice->vnt_mgmt.eScanState != WMAC_NO_SCANNING) {
/* scanning, channel number is pDevice->uScanChannel */
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO
"RFbRawSetPower> 11B mode uCurrChannel[%d]\n",
pDevice->vnt_mgmt.uScanChannel);
bResult &= IFRFbWriteEmbedded(pDevice,
dwVT3226D0LoCurrentTable[pDevice->
vnt_mgmt.uScanChannel - 1]);
} else {
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO
"RFbRawSetPower> 11B mode uCurrChannel[%d]\n",
pDevice->vnt_mgmt.uCurrChannel);
bResult &= IFRFbWriteEmbedded(pDevice,
dwVT3226D0LoCurrentTable[pDevice->
vnt_mgmt.uCurrChannel - 1]);
}
bResult &= IFRFbWriteEmbedded(pDevice, 0x015C0800+(BY_VT3226_REG_LEN<<3)+IFREGCTL_REGW); //RobertYu:20060420, ok now, new switching power (mini-pci can have bigger power consumption)
} else {
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"@@@@ RFbRawSetPower> 11G mode\n");
dwVT3226Pwr = ((0x3F-pDevice->byCurPwr) << 20 ) | ( 0x7 << 8 ) /* Reg7 */ | //RobertYu:20060420, TWIF 1.10
(BY_VT3226_REG_LEN << 3 ) | IFREGCTL_REGW;
bResult &= IFRFbWriteEmbedded(pDevice, dwVT3226Pwr);
bResult &= IFRFbWriteEmbedded(pDevice, 0x00C6A200+(BY_VT3226_REG_LEN<<3)+IFREGCTL_REGW); //RobertYu:20060327
bResult &= IFRFbWriteEmbedded(pDevice, 0x016BC600+(BY_VT3226_REG_LEN<<3)+IFREGCTL_REGW); //RobertYu:20060111
bResult &= IFRFbWriteEmbedded(pDevice, 0x00900800+(BY_VT3226_REG_LEN<<3)+IFREGCTL_REGW); //RobertYu:20060111
}
break;
}
//{{RobertYu:20060609
case RF_VT3342A0:
{
DWORD dwVT3342Pwr;
if (pDevice->byCurPwr >= VT3342_PWR_IDX_LEN)
return FALSE;
dwVT3342Pwr = ((0x3F-pDevice->byCurPwr) << 20 ) | ( 0x27 << 8 ) /* Reg7 */ |
(BY_VT3342_REG_LEN << 3 ) | IFREGCTL_REGW;
bResult &= IFRFbWriteEmbedded(pDevice, dwVT3342Pwr);
break;
}
default :
break;
}
return bResult;
}