/**
* @Function PutChar(char ch)
* @param ch - the char to be sent out the serial port
* @return None.
* @brief adds char to the end of the circular buffer and forces the interrupt flag
* high if nothing is currently transmitting
* @author Max Dunne, 2011.11.10 */
void PutChar(char ch)
{
if (getLength(transmitBuffer) != QUEUESIZE) {
AddingToTransmit = TRUE;
writeBack(transmitBuffer, ch);
AddingToTransmit = FALSE;
if (U1STAbits.TRMT) {
INTSetFlag(INT_U1TX);
}
//re-enter the interrupt if we removed a character while getting another one
if (TransmitCollisionOccured) {
INTSetFlag(INT_U1TX);
TransmitCollisionOccured = FALSE;
}
}
}
uint8 FIFOI2C_addQueue(uint16 device, uint8 byte_buffer[], FIFOI2C_Device_Commands state_buffer[], uint32 buffer_length)
{
int i = 0, ind = 0;
//Check for potential overflow of the TX buffer.
if ((FIFOI2C_Devices_List[device].transmit_buffer_length + buffer_length) >= (FIFOI2C_TRANSMIT_BUFFER_SIZE - 1))
{
return -1;
}
else
{
//Adds the byte and state buffers to the Device's buffer
while (i < buffer_length)
{
FIFOI2C_TX_Byte txb;
txb.tx_byte = byte_buffer[i];
txb.device_command = state_buffer[i];
ind = FIFOI2C_Devices_List[device].transmit_buffer_length;
FIFOI2C_Devices_List[device].transmit_buffer[ind] = txb;
FIFOI2C_Devices_List[device].transmit_buffer_length++;
i++;
}
//If FIFOI2C isn't running, then start it
if (FIFOI2C_isRunning == 0)
{
FIFOI2C_currentDevice = device;
FIFOI2C_isRunning = 1;
//Trigger to I2C2 Master IRQ is interrupts are enabled.
INTSetFlag(INT_I2C2M);
}
}
}
void UARTPutStr( char *tx_data )
{
// take the output semaphore
xSemaphoreTake( outputStringBuffer, portMAX_DELAY );
// format string for Tx ISR
sprintf( tx_buffer, "%s", tx_data );
// set Tx interrupt
INTSetFlag( INT_U1TX );
}
/**
* @Function GetChar(void)
* @param None.
* @return ch - char from the serial port
* @brief reads first character from buffer or returns 0 if no chars available
* @author Max Dunne, 2011.11.10 */
char GetChar(void)
{
char ch;
if (getLength(receiveBuffer) == 0) {
ch = 0;
} else {
GettingFromReceive = TRUE;
ch = readFront(receiveBuffer);
GettingFromReceive = FALSE;
}
//re-enter the interrupt if we added a character while transmitting another one
if (ReceiveCollisionOccured) {
INTSetFlag(INT_U1RX);
ReceiveCollisionOccured = FALSE;
}
return ch;
}
int FIFOSPI2_pushTxQueue(uint8 data[], int length, int deviceSSLine)
{
int i = 0;
//If the send buffer isn't full then add another char
if ((TxBuffer_Index + length) < FIFOSPI2_BUFFERSIZE)
{
// //Adds a token to signify end signal group.
// SendBufferFlags[SendBuffer_Index + length - 1] = 1;
//Add each byte to the buffer
while (i < length)
{
//Populate SendBuuferFlags with which device we a re sending to.
TxBufferFlags[i] = deviceSSLine;
TxBuffer[TxBuffer_Index++] = data[i];
i++;
}
//If SPI2 IRQ is not running then start it
if (FIFOSPI2_isRunnning == 0)
{
FIFOSPI2_isRunnning = 1;
//If the device is on and ready to send
if (SPI2CONbits.ON == 1)
{
//Start sending
INTSetFlag(INT_SPI2TX);
INTEnable(INT_SPI2TX, INT_ENABLED);
}
}
return 1;
}
//Overflow error
else
{
return -1;
}
}
UINT8 FIFOI2C2_pushTxQueue(UINT16 device, UINT8 byte_buffer[], FIFOI2C2_Device_Commands state_buffer[], UINT32 buffer_length)
{
int i = 0, ind = 0;
FIFOI2C2_TX_Byte txb;
//Check for potential overflow of the TX buffer.
if ((FIFOI2C2_Devices_List[device].transmit_buffer_length + buffer_length) >= (FIFOI2C2_TRANSMIT_BUFFER_SIZE - 1))
{
return -1;
}
else
{
//Adds the byte and state buffers to the Device's transmit buffer
while (i < buffer_length)
{
//Selects this i-th byte
txb.tx_byte = byte_buffer[i];
//Selects the i-th command
txb.device_command = state_buffer[i];
//Sets the index to the current device's transmit buffer length
ind = FIFOI2C2_Devices_List[device].transmit_buffer_length;
//transfer the byte to the current devices buffer
FIFOI2C2_Devices_List[device].transmit_buffer[ind] = txb;
FIFOI2C2_Devices_List[device].transmit_buffer_length++;
i++;
}
//If FIFOI2C2 isn't running, then start it
if (FIFOI2C2_isRunning == 0)
{
FIFOI2C2_currentDevice = device;
FIFOI2C2_isRunning = 1;
//Trigger to I2C2 Master IRQ is interrupts are enabled.
INTSetFlag(INT_I2C2M);
}
}
return 1;
}
//******************************************************************************
//Interrupt Request Routines
//******************************************************************************
void __ISR(_I2C_2_VECTOR, IPL5AUTO) __I2C2Interrupt(void)
{
int i = 0;
int ind = 0, ind2 = 0;
FIFOI2C2_RX_Byte rxb;
if (INTGetFlag(INT_I2C2B)) //Bus Collision
{
INTClearFlag(INT_I2C2B);
//TODO: Set an error, or reset the transmission.
}
if (INTGetFlag(INT_I2C2M)) //Master Intterupt
{
INTClearFlag(INT_I2C2M);
//If we have received a byte, read it.
if (FIFOI2C2_nextInterruptReceive == 1)
{
//Setup indexes (easier to read)
ind = FIFOI2C2_Devices_List[FIFOI2C2_currentDevice].transmit_buffer_current;
ind2 = FIFOI2C2_Devices_List[FIFOI2C2_currentDevice].receive_buffer_length;
//Read the received byte and the current command we are on.
rxb.device_command = FIFOI2C2_Devices_List[FIFOI2C2_currentDevice].transmit_buffer[ind].device_command;
//read the transmitted byte
rxb.rx_byte = I2C2RCV;
//Write rxb to the receive buffer
FIFOI2C2_Devices_List[FIFOI2C2_currentDevice].receive_buffer[ind2] = rxb;
//increment indexes
FIFOI2C2_Devices_List[FIFOI2C2_currentDevice].receive_buffer_length++;
FIFOI2C2_nextInterruptReceive = 0;
}
//Switch statement for the current_device's transmit byte's device_state
ind = FIFOI2C2_Devices_List[FIFOI2C2_currentDevice].transmit_buffer_current;
switch(FIFOI2C2_Devices_List[FIFOI2C2_currentDevice].transmit_buffer[ind].device_command)
{
case FIFOI2C2_DEVICE_COMMAND_CMDERROR:
ind = 0; //filler
break;
case FIFOI2C2_DEVICE_COMMAND_START:
I2C2CONbits.SEN = 1; //start condition sequence
break;
case FIFOI2C2_DEVICE_COMMAND_TX_BYTE:
I2C2TRN = FIFOI2C2_Devices_List[FIFOI2C2_currentDevice].transmit_buffer[ind].tx_byte; //transmit byte
break;
case FIFOI2C2_DEVICE_COMMAND_RESTART:
I2C2CONbits.RSEN = 1; //repeated start condition sequence
break;
case FIFOI2C2_DEVICE_COMMAND_RX_BYTE:
I2C2CONbits.RCEN = 1; //Receive byte sequence
//Flag for next intr to be for receiving said byte
FIFOI2C2_nextInterruptReceive = 1;
break;
case FIFOI2C2_DEVICE_COMMAND_ACK:
I2C2CONbits.ACKDT = 0; //ACK
I2C2CONbits.ACKEN = 1; //Send ACK sequence
break;
case FIFOI2C2_DEVICE_COMMAND_NACK:
I2C2CONbits.ACKDT = 1; //NACK
I2C2CONbits.ACKEN = 1; //Send NACK sequence
break;
case FIFOI2C2_DEVICE_COMMAND_STOP:
I2C2CONbits.PEN = 1; //Stop routine
break;
case FIFOI2C2_DEVICE_COMMAND_CMDEND:
//Loop through all devices and check if they have something (or more somethings) to send.
//Check Current Device first
if ((FIFOI2C2_Devices_List[FIFOI2C2_currentDevice].transmit_buffer_current + 1) >=
FIFOI2C2_Devices_List[FIFOI2C2_currentDevice].transmit_buffer_length)
{
//Turn off I2C IRq routine
FIFOI2C2_isRunning = 0;
//Reset transmit indexes
FIFOI2C2_Devices_List[FIFOI2C2_currentDevice].transmit_buffer_current = 0;
FIFOI2C2_Devices_List[FIFOI2C2_currentDevice].transmit_buffer_length = 0;
//Check other devices now
while (i < FIFOI2C2_DEVICES_COUNT)
{
//If not this device (since we already checked it)
if (i != FIFOI2C2_currentDevice)
{
if(FIFOI2C2_Devices_List[i].transmit_buffer_length >
FIFOI2C2_Devices_List[i].transmit_buffer_current) //If they have something to send
{
//Set device as the current device
FIFOI2C2_currentDevice = i;
//Turn back on FIFOI2C2
FIFOI2C2_isRunning = 1;
//Kick-Start Operation
INTSetFlag(INT_I2C2M);
}
}
i++;
}
//Done so quit routine.
return;
}
else
{
//Keep it running
INTSetFlag(INT_I2C2M);
}
break;
default:
break;
}
//Increment next cmd to tx
FIFOI2C2_Devices_List[FIFOI2C2_currentDevice].transmit_buffer_current++;
}
}
//******************************************************************************
//Interrupt Request Routines
//******************************************************************************
void __ISR(_SPI_2_VECTOR, IPL4AUTO)__SPI2Interrupt(void)
{
//Receive interupt
if (INTGetFlag(INT_SPI2RX))
{
//If it's RX's turn
if (isTransmitsTurn == 0)
{
//Set the flag so it's TX's turn next
isTransmitsTurn = 1;
//Read byte from buffer
RxBuffer[RxBuffer_Index++] = SPI2BUF;
//Clear Interrupt flag
INTClearFlag(INT_SPI2RX);
//If the current device we are sending to doesn't match the next byte's device
if (TxBufferFlags[TxBuffer_TxIndex] != TxBufferFlags[TxBuffer_TxIndex -1])
{
//TODO: decide if it's better just to deselect all devices.
//Deselect the current device
switch (TxBufferFlags[RxBuffer_Index - 1])
{
case 0:
FIFOSPI2_DeviceSSLine1_PortReg = 1;
FIFOSPI2_DeviceSSLine2_PortReg = 1;
break;
case 1:
FIFOSPI2_DeviceSSLine1_PortReg = 1; //Hi to deselect
break;
case 2:
FIFOSPI2_DeviceSSLine2_PortReg = 1; //Hi to deselect
break;
}
}
//If their are bytes to send
if (TxBuffer_Index > TxBuffer_TxIndex)
{
//Set the TX Interupt flag so that it can send them
INTSetFlag(INT_SPI2TX);
INTEnable(INT_SPI2TX, INT_ENABLED);
}
else
{
//Clear and disable the TX interupt
INTEnable(INT_SPI2TX, INT_DISABLED);
INTClearFlag(INT_SPI2TX);
//update the flag that it's not running anymore.
FIFOSPI2_isRunnning = 0;
//Clear the Send Buffer indecies
TxBuffer_TxIndex = 0;
TxBuffer_Index = 0;
}
}
}
//Transmit interrupt and it is enabled.
if (INTGetFlag(INT_SPI2TX) && INTGetEnable(INT_SPI2TX))
{
//Clear Interrupt flag
//INTClearFlag(INT_SPI2TX);
INTEnable(INT_SPI2TX, INT_DISABLED);
//If it's TX's turn
if (isTransmitsTurn == 1)
{
//Set the flag so it's RX's turn next
isTransmitsTurn = 0;
// //Select the current device
// FIFOSPI2_DeviceSSLine1 = 0;
//Select the current device
switch (TxBufferFlags[TxBuffer_TxIndex])
{
case 1:
FIFOSPI2_DeviceSSLine1_PortReg = 0; //Low to select
break;
case 2:
FIFOSPI2_DeviceSSLine2_PortReg = 0; //Low to select
break;
}
//Send the next byte
SPI2BUF = TxBuffer[TxBuffer_TxIndex++];
}
}
}
//=============================================
// Configure the I2C4 interrupt handler
//=============================================
void __ISR(_I2C_4_VECTOR, I2C4_INT_PRIORITY) I2c4InterruptHandler(void)
{
sI2cCmdBuffer_t masterData;
if (INTGetFlag(INT_I2C4B)) //Bus Collision interrupt
{
INTClearFlag(INT_I2C4B);
}
if (INTGetFlag(INT_I2C4M)) // Master interrupt
{
INTClearFlag(INT_I2C4M);
if (I2c.Var.oReadDataInNextInterrupt[I2C4]) // If a read was started last interrupt
{
masterData.data = I2C4RCV; // Read from I2C buffer
masterData.state = I2C_MASTER_RECEIVE_DATA;
I2cFifoWrite((void *) &I2c.Var.i2cUserFifo[I2C4], &masterData);
I2c.Var.oRxDataAvailable[I2C4] = 1;
I2c.Var.oReadDataInNextInterrupt[I2C4] = 0;
}
if (I2c.Var.oI2cWriteIsRunning[I2C4])
{
I2cFifoRead((void *) &I2c.Var.i2cWriteQueue[I2C4], &masterData);
switch (masterData.state)
{
//======================================================
case I2C_MASTER_RECEIVE_DATA :
I2C4CONbits.RCEN = 1; //Receive byte sequence
I2c.Var.oReadDataInNextInterrupt[I2C4] = 1; // Flag for the next interrupt to read the rx buffer
break;
//======================================================
//======================================================
case I2C_MASTER_START_CONDITION :
I2C4CONbits.SEN = 1; //start condition sequence
break;
//======================================================
//======================================================
case I2C_MASTER_STOP_CONDITION :
I2C4CONbits.PEN = 1;
if (I2c.Var.oPoolSlaveAcknowledge[I2C4])
{
if (!I2c.Var.oSecondStopAfterPooling[I2C4])
{
masterData.state = I2C_MASTER_START_CONDITION;
I2cFifoWrite((void *) &I2c.Var.i2cWriteQueue[I2C4], &masterData);
masterData.state = I2C_MASTER_TRANSMIT_DATA;
I2cFifoWrite((void *) &I2c.Var.i2cWriteQueue[I2C4], &masterData);
masterData.state = I2C_MASTER_STOP_CONDITION;
I2cFifoWrite((void *) &I2c.Var.i2cWriteQueue[I2C4], &masterData);
I2c.Var.oSecondStopAfterPooling[I2C4] = 1;
}
else
{
if (!I2CByteWasAcknowledged(I2C4))
{
masterData.state = I2C_MASTER_START_CONDITION;
I2cFifoWrite((void *) &I2c.Var.i2cWriteQueue[I2C4], &masterData);
masterData.state = I2C_MASTER_TRANSMIT_DATA;
I2cFifoWrite((void *) &I2c.Var.i2cWriteQueue[I2C4], &masterData);
masterData.state = I2C_MASTER_STOP_CONDITION;
I2cFifoWrite((void *) &I2c.Var.i2cWriteQueue[I2C4], &masterData);
}
else
{
masterData.state = I2C_MASTER_DONE;
I2cFifoWrite((void *) &I2c.Var.i2cWriteQueue[I2C4], &masterData);
I2c.Var.oSecondStopAfterPooling[I2C4] = 0;
}
}
}
break;
//======================================================
//======================================================
case I2C_MASTER_TRANSMIT_DATA :
I2C4TRN = masterData.data;
break;
//======================================================
//======================================================
case I2C_MASTER_DONE :
if (I2c.Var.i2cWriteQueue[I2C4].bufEmpty) // Nothing more to send
{
I2c.Var.oI2cWriteIsRunning[I2C4] = 0; // Turn off writing process
}
else
{
INTSetFlag(INT_I2C4M); // Start another writing process
}
break;
//======================================================
//======================================================
case I2C_MASTER_REPEAT_START :
I2C4CONbits.RSEN = 1; //repeated start condition sequence
break;
//======================================================
//======================================================
case I2C_MASTER_SLAVE_SENT_STOP :
LED_ERROR_ON;
break;
//======================================================
//======================================================
case I2C_MASTER_SEND_ACK :
I2C4CONbits.ACKDT = 0; //ACK
I2C4CONbits.ACKEN = 1; //Send ACK sequence
break;
//======================================================
//======================================================
case I2C_MASTER_SEND_NACK :
I2C4CONbits.ACKDT = 1; //NACK
I2C4CONbits.ACKEN = 1; //Send NACK sequence
break;
//======================================================
//======================================================
case I2C_CMD_ERROR :
LED_ERROR_ON;
break;
//======================================================
//======================================================
default :
break;
//======================================================
} // end switch
} // end if
if (I2c.Var.oI2cReadIsRunning[I2C4])
{
I2cFifoRead((void *) &I2c.Var.i2cReadQueue[I2C4], &masterData);
switch (masterData.state)
{
//======================================================
case I2C_MASTER_RECEIVE_DATA :
I2C4CONbits.RCEN = 1; //Receive byte sequence
I2c.Var.oReadDataInNextInterrupt[I2C4] = 1;
break;
//======================================================
//======================================================
case I2C_MASTER_START_CONDITION :
I2C4CONbits.SEN = 1; //start condition sequence
break;
//======================================================
//======================================================
case I2C_MASTER_REPEAT_START :
I2C4CONbits.RSEN = 1; //repeated start condition sequence
break;
//======================================================
//======================================================
case I2C_MASTER_STOP_CONDITION :
I2C4CONbits.PEN = 1;
break;
//======================================================
//======================================================
case I2C_MASTER_TRANSMIT_DATA :
I2C4TRN = masterData.data;
break;
//======================================================
//======================================================
case I2C_MASTER_DONE :
if (I2c.Var.i2cReadQueue[I2C4].bufEmpty) // Nothing more to send
{
I2c.Var.oI2cReadIsRunning[I2C4] = 0; // Turn off reading process
}
else
{
INTSetFlag(INT_I2C4M); // Start another reading process
}
break;
//======================================================
//======================================================
case I2C_MASTER_SLAVE_SENT_STOP :
LED_ERROR_ON;
break;
//======================================================
//======================================================
case I2C_MASTER_SEND_ACK :
I2C4CONbits.ACKDT = 0; //ACK
I2C4CONbits.ACKEN = 1; //Send ACK sequence
break;
//======================================================
//======================================================
case I2C_MASTER_SEND_NACK :
I2C4CONbits.ACKDT = 1; //NACK
I2C4CONbits.ACKEN = 1; //Send NACK sequence
break;
//======================================================
//======================================================
case I2C_CMD_ERROR :
LED_ERROR_ON;
break;
//======================================================
//======================================================
default :
break;
//======================================================
} // end switch
} // end if
} // end if
} // end if
