/* Check pitch constriants for all chips & tiling formats */
static bool
i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
{
int tile_width;
/* Linear is always fine */
if (tiling_mode == I915_TILING_NONE)
return true;
if (!IS_I9XX(dev) ||
(tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)))
tile_width = 128;
else
tile_width = 512;
/* check maximum stride & object size */
if (IS_I965G(dev)) {
/* i965 stores the end address of the gtt mapping in the fence
* reg, so dont bother to check the size */
if (stride / 128 > I965_FENCE_MAX_PITCH_VAL)
return false;
} else if (IS_I9XX(dev)) {
uint32_t pitch_val = ffs(stride / tile_width) - 1;
/* XXX: For Y tiling, FENCE_MAX_PITCH_VAL is actually 6 (8KB)
* instead of 4 (2KB) on 945s.
*/
if (pitch_val > I915_FENCE_MAX_PITCH_VAL ||
size > (I830_FENCE_MAX_SIZE_VAL << 20))
return false;
} else {
uint32_t pitch_val = ffs(stride / tile_width) - 1;
if (pitch_val > I830_FENCE_MAX_PITCH_VAL ||
size > (I830_FENCE_MAX_SIZE_VAL << 19))
return false;
}
/* 965+ just needs multiples of tile width */
if (IS_I965G(dev)) {
if (stride & (tile_width - 1))
return false;
return true;
}
/* Pre-965 needs power of two tile widths */
if (stride < tile_width)
return false;
if (stride & (stride - 1))
return false;
/* We don't 0handle the aperture area covered by the fence being bigger
* than the object size.
*/
if (i915_get_fence_size(dev, size) != size)
return false;
return true;
}
static bool
i915_gem_object_fence_offset_ok(struct drm_gem_object *obj, int tiling_mode)
{
struct drm_device *dev = obj->dev;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
if (obj_priv->gtt_space == NULL)
return true;
if (tiling_mode == I915_TILING_NONE)
return true;
if (!IS_I965G(dev)) {
if (obj_priv->gtt_offset & (obj->size - 1))
return false;
if (IS_I9XX(dev)) {
if (obj_priv->gtt_offset & ~I915_FENCE_START_MASK)
return false;
} else {
if (obj_priv->gtt_offset & ~I830_FENCE_START_MASK)
return false;
}
}
return true;
}
/**
* Returns whether an object is currently fenceable. If not, it may need
* to be unbound and have its pitch adjusted.
*/
bool
i915_obj_fenceable(struct drm_device *dev, struct drm_gem_object *obj)
{
struct drm_i915_gem_object *obj_priv = obj->driver_private;
if (IS_I965G(dev)) {
/* The 965 can have fences at any page boundary. */
if (obj->size & 4095)
return false;
return true;
} else if (IS_I9XX(dev)) {
if (obj_priv->gtt_offset & ~I915_FENCE_START_MASK)
return false;
} else {
if (obj_priv->gtt_offset & ~I830_FENCE_START_MASK)
return false;
}
/* Power of two sized... */
if (obj->size & (obj->size - 1))
return false;
/* Objects must be size aligned as well */
if (obj_priv->gtt_offset & (obj->size - 1))
return false;
return true;
}
/**
* Returns the size of the fence for a tiled object of the given size.
*/
static int
i915_get_fence_size(struct drm_device *dev, int size)
{
int i;
int start;
if (IS_I965G(dev)) {
/* The 965 can have fences at any page boundary. */
return (size + PAGE_SIZE-1) & ~(PAGE_SIZE-1);
} else {
/* Align the size to a power of two greater than the smallest
* fence size.
*/
if (IS_I9XX(dev))
start = 1024 * 1024;
else
start = 512 * 1024;
for (i = start; i < size; i <<= 1)
;
return i;
}
}
/* Check pitch constriants for all chips & tiling formats */
bool
i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
{
int tile_width;
/* Linear is always fine */
if (tiling_mode == I915_TILING_NONE)
return true;
if (!IS_I9XX(dev) ||
(tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)))
tile_width = 128;
else
tile_width = 512;
/* check maximum stride & object size */
if (IS_I965G(dev)) {
/* i965 stores the end address of the gtt mapping in the fence
* reg, so dont bother to check the size */
if (stride / 128 > I965_FENCE_MAX_PITCH_VAL)
return false;
} else if (IS_GEN3(dev) || IS_GEN2(dev)) {
if (stride > 8192)
return false;
if (IS_GEN3(dev)) {
if (size > I830_FENCE_MAX_SIZE_VAL << 20)
return false;
} else {
if (size > I830_FENCE_MAX_SIZE_VAL << 19)
return false;
}
}
/* 965+ just needs multiples of tile width */
if (IS_I965G(dev)) {
if (stride & (tile_width - 1))
return false;
return true;
}
/* Pre-965 needs power of two tile widths */
if (stride < tile_width)
return false;
if (stride & (stride - 1))
return false;
return true;
}
/**
* Detects bit 6 swizzling of address lookup between IGD access and CPU
* access through main memory.
*/
void
i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
uint32_t swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
uint32_t swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
bool need_disable;
if (IS_IRONLAKE(dev) || IS_GEN6(dev)) {
/* On Ironlake whatever DRAM config, GPU always do
* same swizzling setup.
*/
swizzle_x = I915_BIT_6_SWIZZLE_9_10;
swizzle_y = I915_BIT_6_SWIZZLE_9;
} else if (!IS_I9XX(dev)) {
/* As far as we know, the 865 doesn't have these bit 6
* swizzling issues.
*/
swizzle_x = I915_BIT_6_SWIZZLE_NONE;
swizzle_y = I915_BIT_6_SWIZZLE_NONE;
} else if (IS_MOBILE(dev)) {
uint32_t dcc;
/* Try to make sure MCHBAR is enabled before poking at it */
need_disable = intel_setup_mchbar(dev);
/* On mobile 9xx chipsets, channel interleave by the CPU is
* determined by DCC. For single-channel, neither the CPU
* nor the GPU do swizzling. For dual channel interleaved,
* the GPU's interleave is bit 9 and 10 for X tiled, and bit
* 9 for Y tiled. The CPU's interleave is independent, and
* can be based on either bit 11 (haven't seen this yet) or
* bit 17 (common).
*/
dcc = I915_READ(DCC);
switch (dcc & DCC_ADDRESSING_MODE_MASK) {
case DCC_ADDRESSING_MODE_SINGLE_CHANNEL:
case DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC:
swizzle_x = I915_BIT_6_SWIZZLE_NONE;
swizzle_y = I915_BIT_6_SWIZZLE_NONE;
break;
case DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED:
if (dcc & DCC_CHANNEL_XOR_DISABLE) {
/* This is the base swizzling by the GPU for
* tiled buffers.
*/
swizzle_x = I915_BIT_6_SWIZZLE_9_10;
swizzle_y = I915_BIT_6_SWIZZLE_9;
} else if ((dcc & DCC_CHANNEL_XOR_BIT_17) == 0) {
/* Bit 11 swizzling by the CPU in addition. */
swizzle_x = I915_BIT_6_SWIZZLE_9_10_11;
swizzle_y = I915_BIT_6_SWIZZLE_9_11;
} else {
/* Bit 17 swizzling by the CPU in addition. */
swizzle_x = I915_BIT_6_SWIZZLE_9_10_17;
swizzle_y = I915_BIT_6_SWIZZLE_9_17;
}
break;
}
if (dcc == 0xffffffff) {
DRM_ERROR("Couldn't read from MCHBAR. "
"Disabling tiling.\n");
swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
}
intel_teardown_mchbar(dev, need_disable);
} else {
/* The 965, G33, and newer, have a very flexible memory
* configuration. It will enable dual-channel mode
* (interleaving) on as much memory as it can, and the GPU
* will additionally sometimes enable different bit 6
* swizzling for tiled objects from the CPU.
*
* Here's what I found on the G965:
* slot fill memory size swizzling
* 0A 0B 1A 1B 1-ch 2-ch
* 512 0 0 0 512 0 O
* 512 0 512 0 16 1008 X
* 512 0 0 512 16 1008 X
* 0 512 0 512 16 1008 X
* 1024 1024 1024 0 2048 1024 O
*
* We could probably detect this based on either the DRB
* matching, which was the case for the swizzling required in
* the table above, or from the 1-ch value being less than
* the minimum size of a rank.
*/
if (I915_READ16(C0DRB3) != I915_READ16(C1DRB3)) {
swizzle_x = I915_BIT_6_SWIZZLE_NONE;
swizzle_y = I915_BIT_6_SWIZZLE_NONE;
} else {
swizzle_x = I915_BIT_6_SWIZZLE_9_10;
swizzle_y = I915_BIT_6_SWIZZLE_9;
}
}
dev_priv->mm.bit_6_swizzle_x = swizzle_x;
dev_priv->mm.bit_6_swizzle_y = swizzle_y;
}
void i915_restore_display(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
/* Display arbitration */
I915_WRITE(DSPARB, dev_priv->saveDSPARB);
/* Display port ratios (must be done before clock is set) */
if (SUPPORTS_INTEGRATED_DP(dev)) {
I915_WRITE(PIPEA_GMCH_DATA_M, dev_priv->savePIPEA_GMCH_DATA_M);
I915_WRITE(PIPEB_GMCH_DATA_M, dev_priv->savePIPEB_GMCH_DATA_M);
I915_WRITE(PIPEA_GMCH_DATA_N, dev_priv->savePIPEA_GMCH_DATA_N);
I915_WRITE(PIPEB_GMCH_DATA_N, dev_priv->savePIPEB_GMCH_DATA_N);
I915_WRITE(PIPEA_DP_LINK_M, dev_priv->savePIPEA_DP_LINK_M);
I915_WRITE(PIPEB_DP_LINK_M, dev_priv->savePIPEB_DP_LINK_M);
I915_WRITE(PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N);
I915_WRITE(PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N);
}
/* This is only meaningful in non-KMS mode */
/* Don't restore them in KMS mode */
i915_restore_modeset_reg(dev);
/* Cursor state */
I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
I915_WRITE(CURABASE, dev_priv->saveCURABASE);
I915_WRITE(CURBPOS, dev_priv->saveCURBPOS);
I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR);
I915_WRITE(CURBBASE, dev_priv->saveCURBBASE);
if (!IS_I9XX(dev))
I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
/* CRT state */
if (IS_IRONLAKE(dev))
I915_WRITE(PCH_ADPA, dev_priv->saveADPA);
else
I915_WRITE(ADPA, dev_priv->saveADPA);
/* LVDS state */
if (IS_I965G(dev) && !IS_IRONLAKE(dev))
I915_WRITE(BLC_PWM_CTL2, dev_priv->saveBLC_PWM_CTL2);
if (IS_IRONLAKE(dev)) {
I915_WRITE(PCH_LVDS, dev_priv->saveLVDS);
} else if (IS_MOBILE(dev) && !IS_I830(dev))
I915_WRITE(LVDS, dev_priv->saveLVDS);
if (!IS_I830(dev) && !IS_845G(dev) && !IS_IRONLAKE(dev))
I915_WRITE(PFIT_CONTROL, dev_priv->savePFIT_CONTROL);
if (IS_IRONLAKE(dev)) {
I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->saveBLC_PWM_CTL);
I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->saveBLC_PWM_CTL2);
I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL);
I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->saveBLC_CPU_PWM_CTL2);
I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
I915_WRITE(PCH_PP_DIVISOR, dev_priv->savePP_DIVISOR);
I915_WRITE(PCH_PP_CONTROL, dev_priv->savePP_CONTROL);
I915_WRITE(MCHBAR_RENDER_STANDBY,
dev_priv->saveMCHBAR_RENDER_STANDBY);
} else {
I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS);
I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL);
I915_WRITE(BLC_HIST_CTL, dev_priv->saveBLC_HIST_CTL);
I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
}
/* Display Port state */
if (SUPPORTS_INTEGRATED_DP(dev)) {
I915_WRITE(DP_B, dev_priv->saveDP_B);
I915_WRITE(DP_C, dev_priv->saveDP_C);
I915_WRITE(DP_D, dev_priv->saveDP_D);
}
/* FIXME: restore TV & SDVO state */
/* only restore FBC info on the platform that supports FBC*/
if (I915_HAS_FBC(dev)) {
if (IS_GM45(dev)) {
g4x_disable_fbc(dev);
I915_WRITE(DPFC_CB_BASE, dev_priv->saveDPFC_CB_BASE);
} else {
i8xx_disable_fbc(dev);
I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE);
I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE);
I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2);
I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL);
}
}
/* VGA state */
if (IS_IRONLAKE(dev))
I915_WRITE(CPU_VGACNTRL, dev_priv->saveVGACNTRL);
else
I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL);
I915_WRITE(VGA0, dev_priv->saveVGA0);
I915_WRITE(VGA1, dev_priv->saveVGA1);
I915_WRITE(VGA_PD, dev_priv->saveVGA_PD);
DRM_UDELAY(150);
i915_restore_vga(dev);
}
void i915_save_display(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
/* Display arbitration control */
dev_priv->saveDSPARB = I915_READ(DSPARB);
/* This is only meaningful in non-KMS mode */
/* Don't save them in KMS mode */
i915_save_modeset_reg(dev);
/* Cursor state */
dev_priv->saveCURACNTR = I915_READ(CURACNTR);
dev_priv->saveCURAPOS = I915_READ(CURAPOS);
dev_priv->saveCURABASE = I915_READ(CURABASE);
dev_priv->saveCURBCNTR = I915_READ(CURBCNTR);
dev_priv->saveCURBPOS = I915_READ(CURBPOS);
dev_priv->saveCURBBASE = I915_READ(CURBBASE);
if (!IS_I9XX(dev))
dev_priv->saveCURSIZE = I915_READ(CURSIZE);
/* CRT state */
if (IS_IRONLAKE(dev)) {
dev_priv->saveADPA = I915_READ(PCH_ADPA);
} else {
dev_priv->saveADPA = I915_READ(ADPA);
}
/* LVDS state */
if (IS_IRONLAKE(dev)) {
dev_priv->savePP_CONTROL = I915_READ(PCH_PP_CONTROL);
dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_PCH_CTL1);
dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_PCH_CTL2);
dev_priv->saveBLC_CPU_PWM_CTL = I915_READ(BLC_PWM_CPU_CTL);
dev_priv->saveBLC_CPU_PWM_CTL2 = I915_READ(BLC_PWM_CPU_CTL2);
dev_priv->saveLVDS = I915_READ(PCH_LVDS);
} else {
dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
dev_priv->saveBLC_HIST_CTL = I915_READ(BLC_HIST_CTL);
if (IS_I965G(dev))
dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2);
if (IS_MOBILE(dev) && !IS_I830(dev))
dev_priv->saveLVDS = I915_READ(LVDS);
}
if (!IS_I830(dev) && !IS_845G(dev) && !IS_IRONLAKE(dev))
dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL);
if (IS_IRONLAKE(dev)) {
dev_priv->savePP_ON_DELAYS = I915_READ(PCH_PP_ON_DELAYS);
dev_priv->savePP_OFF_DELAYS = I915_READ(PCH_PP_OFF_DELAYS);
dev_priv->savePP_DIVISOR = I915_READ(PCH_PP_DIVISOR);
} else {
dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS);
dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
}
/* Display Port state */
if (SUPPORTS_INTEGRATED_DP(dev)) {
dev_priv->saveDP_B = I915_READ(DP_B);
dev_priv->saveDP_C = I915_READ(DP_C);
dev_priv->saveDP_D = I915_READ(DP_D);
dev_priv->savePIPEA_GMCH_DATA_M = I915_READ(PIPEA_GMCH_DATA_M);
dev_priv->savePIPEB_GMCH_DATA_M = I915_READ(PIPEB_GMCH_DATA_M);
dev_priv->savePIPEA_GMCH_DATA_N = I915_READ(PIPEA_GMCH_DATA_N);
dev_priv->savePIPEB_GMCH_DATA_N = I915_READ(PIPEB_GMCH_DATA_N);
dev_priv->savePIPEA_DP_LINK_M = I915_READ(PIPEA_DP_LINK_M);
dev_priv->savePIPEB_DP_LINK_M = I915_READ(PIPEB_DP_LINK_M);
dev_priv->savePIPEA_DP_LINK_N = I915_READ(PIPEA_DP_LINK_N);
dev_priv->savePIPEB_DP_LINK_N = I915_READ(PIPEB_DP_LINK_N);
}
/* FIXME: save TV & SDVO state */
/* Only save FBC state on the platform that supports FBC */
if (I915_HAS_FBC(dev)) {
if (IS_GM45(dev)) {
dev_priv->saveDPFC_CB_BASE = I915_READ(DPFC_CB_BASE);
} else {
dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE);
dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE);
dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2);
dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL);
}
}
/* VGA state */
dev_priv->saveVGA0 = I915_READ(VGA0);
dev_priv->saveVGA1 = I915_READ(VGA1);
dev_priv->saveVGA_PD = I915_READ(VGA_PD);
if (IS_IRONLAKE(dev))
dev_priv->saveVGACNTRL = I915_READ(CPU_VGACNTRL);
else
dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
i915_save_vga(dev);
}
int main(int argc, char **argv)
{
struct pci_device *dev;
I830Rec i830;
I830Ptr pI830 = &i830;
ScrnInfoRec scrn;
int err, mmio_bar;
void *mmio;
int i;
err = pci_system_init();
if (err != 0) {
fprintf(stderr, "Couldn't initialize PCI system: %s\n",
strerror(err));
exit(1);
}
/* Grab the graphics card */
dev = pci_device_find_by_slot(0, 0, 2, 0);
if (dev == NULL)
errx(1, "Couldn't find graphics card");
err = pci_device_probe(dev);
if (err != 0) {
fprintf(stderr, "Couldn't probe graphics card: %s\n",
strerror(err));
exit(1);
}
if (dev->vendor_id != 0x8086)
errx(1, "Graphics card is non-intel");
i830.PciInfo = dev;
mmio_bar = IS_I9XX((&i830)) ? 0 : 1;
err = pci_device_map_range(dev,
dev->regions[mmio_bar].base_addr,
dev->regions[mmio_bar].size,
PCI_DEV_MAP_FLAG_WRITABLE, &mmio);
if (err != 0) {
fprintf(stderr, "Couldn't map MMIO region: %s\n",
strerror(err));
exit(1);
}
i830.mmio = mmio;
scrn.scrnIndex = 0;
scrn.pI830 = &i830;
OUTREG(SDVOB, (0x0 << 10));
OUTREG(SDVOC, (0x0 << 10));
OUTREG(PORT_HOTPLUG_EN,
(1 << 29) |
(1 << 28) |
(1 << 27) |
SDVOB_HOTPLUG_INT_EN |
SDVOC_HOTPLUG_INT_EN |
(1 << 24) |
CRT_HOTPLUG_INT_EN | TV_HOTPLUG_INT_EN | CRT_HOTPLUG_INT_EN);
for (i = 0;; i++) {
OUTREG(PORT_HOTPLUG_STAT,
(1 << 20) |
(1 << 19) |
(1 << 18) |
(1 << 17) |
CRT_HOTPLUG_INT_STATUS |
TV_HOTPLUG_INT_STATUS |
SDVOC_HOTPLUG_INT_STATUS | SDVOB_HOTPLUG_INT_STATUS);
INREG(PORT_HOTPLUG_STAT);
usleep(500 * 1000);
printf("%5d: 0x%08x\n", i, INREG(PORT_HOTPLUG_STAT));
sleep(1);
}
return 0;
}
/**
* Detects bit 6 swizzling of address lookup between IGD access and CPU
* access through main memory.
*/
void
i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
uint32_t swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
uint32_t swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
if (!IS_I9XX(dev)) {
/* As far as we know, the 865 doesn't have these bit 6
* swizzling issues.
*/
swizzle_x = I915_BIT_6_SWIZZLE_NONE;
swizzle_y = I915_BIT_6_SWIZZLE_NONE;
} else if ((!IS_I965G(dev) && !IS_G33(dev)) || IS_I965GM(dev) ||
IS_GM45(dev)) {
uint32_t dcc;
/* On 915-945 and GM965, channel interleave by the CPU is
* determined by DCC. The CPU will alternate based on bit 6
* in interleaved mode, and the GPU will then also alternate
* on bit 6, 9, and 10 for X, but the CPU may also optionally
* alternate based on bit 17 (XOR not disabled and XOR
* bit == 17).
*/
dcc = I915_READ(DCC);
switch (dcc & DCC_ADDRESSING_MODE_MASK) {
case DCC_ADDRESSING_MODE_SINGLE_CHANNEL:
case DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC:
swizzle_x = I915_BIT_6_SWIZZLE_NONE;
swizzle_y = I915_BIT_6_SWIZZLE_NONE;
break;
case DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED:
if (IS_I915G(dev) || IS_I915GM(dev) ||
dcc & DCC_CHANNEL_XOR_DISABLE) {
swizzle_x = I915_BIT_6_SWIZZLE_9_10;
swizzle_y = I915_BIT_6_SWIZZLE_9;
} else if ((IS_I965GM(dev) || IS_GM45(dev)) &&
(dcc & DCC_CHANNEL_XOR_BIT_17) == 0) {
/* GM965/GM45 does either bit 11 or bit 17
* swizzling.
*/
swizzle_x = I915_BIT_6_SWIZZLE_9_10_11;
swizzle_y = I915_BIT_6_SWIZZLE_9_11;
} else {
/* Bit 17 or perhaps other swizzling */
swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
}
break;
}
if (dcc == 0xffffffff) {
DRM_ERROR("Couldn't read from MCHBAR. "
"Disabling tiling.\n");
swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
}
} else {
/* The 965, G33, and newer, have a very flexible memory
* configuration. It will enable dual-channel mode
* (interleaving) on as much memory as it can, and the GPU
* will additionally sometimes enable different bit 6
* swizzling for tiled objects from the CPU.
*
* Here's what I found on the G965:
* slot fill memory size swizzling
* 0A 0B 1A 1B 1-ch 2-ch
* 512 0 0 0 512 0 O
* 512 0 512 0 16 1008 X
* 512 0 0 512 16 1008 X
* 0 512 0 512 16 1008 X
* 1024 1024 1024 0 2048 1024 O
*
* We could probably detect this based on either the DRB
* matching, which was the case for the swizzling required in
* the table above, or from the 1-ch value being less than
* the minimum size of a rank.
*/
if (I915_READ16(C0DRB3) != I915_READ16(C1DRB3)) {
swizzle_x = I915_BIT_6_SWIZZLE_NONE;
swizzle_y = I915_BIT_6_SWIZZLE_NONE;
} else {
swizzle_x = I915_BIT_6_SWIZZLE_9_10;
swizzle_y = I915_BIT_6_SWIZZLE_9;
}
}
dev_priv->mm.bit_6_swizzle_x = swizzle_x;
dev_priv->mm.bit_6_swizzle_y = swizzle_y;
}
int i915_restore_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int i;
pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
/* Render Standby */
if (IS_I965G(dev) && IS_MOBILE(dev))
I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
/* Hardware status page */
I915_WRITE(HWS_PGA, dev_priv->saveHWS);
/* Display arbitration */
I915_WRITE(DSPARB, dev_priv->saveDSPARB);
/* Fences */
if (IS_I965G(dev)) {
for (i = 0; i < 16; i++)
I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->saveFENCE[i]);
} else {
for (i = 0; i < 8; i++)
I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]);
if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
for (i = 0; i < 8; i++)
I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
}
/* Display port ratios (must be done before clock is set) */
if (SUPPORTS_INTEGRATED_DP(dev)) {
I915_WRITE(PIPEA_GMCH_DATA_M, dev_priv->savePIPEA_GMCH_DATA_M);
I915_WRITE(PIPEB_GMCH_DATA_M, dev_priv->savePIPEB_GMCH_DATA_M);
I915_WRITE(PIPEA_GMCH_DATA_N, dev_priv->savePIPEA_GMCH_DATA_N);
I915_WRITE(PIPEB_GMCH_DATA_N, dev_priv->savePIPEB_GMCH_DATA_N);
I915_WRITE(PIPEA_DP_LINK_M, dev_priv->savePIPEA_DP_LINK_M);
I915_WRITE(PIPEB_DP_LINK_M, dev_priv->savePIPEB_DP_LINK_M);
I915_WRITE(PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N);
I915_WRITE(PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N);
}
/* This is only meaningful in non-KMS mode */
/* Don't restore them in KMS mode */
i915_restore_modeset_reg(dev);
/* Cursor state */
I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
I915_WRITE(CURABASE, dev_priv->saveCURABASE);
I915_WRITE(CURBPOS, dev_priv->saveCURBPOS);
I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR);
I915_WRITE(CURBBASE, dev_priv->saveCURBBASE);
if (!IS_I9XX(dev))
I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
/* CRT state */
I915_WRITE(ADPA, dev_priv->saveADPA);
/* LVDS state */
if (IS_I965G(dev))
I915_WRITE(BLC_PWM_CTL2, dev_priv->saveBLC_PWM_CTL2);
if (IS_MOBILE(dev) && !IS_I830(dev))
I915_WRITE(LVDS, dev_priv->saveLVDS);
if (!IS_I830(dev) && !IS_845G(dev))
I915_WRITE(PFIT_CONTROL, dev_priv->savePFIT_CONTROL);
I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS);
I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL);
I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
/* Display Port state */
if (SUPPORTS_INTEGRATED_DP(dev)) {
I915_WRITE(DP_B, dev_priv->saveDP_B);
I915_WRITE(DP_C, dev_priv->saveDP_C);
I915_WRITE(DP_D, dev_priv->saveDP_D);
}
/* FIXME: restore TV & SDVO state */
/* FBC info */
I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE);
I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE);
I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2);
I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL);
/* VGA state */
I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL);
I915_WRITE(VGA0, dev_priv->saveVGA0);
I915_WRITE(VGA1, dev_priv->saveVGA1);
I915_WRITE(VGA_PD, dev_priv->saveVGA_PD);
DRM_UDELAY(150);
/* Clock gating state */
I915_WRITE (D_STATE, dev_priv->saveD_STATE);
I915_WRITE (DSPCLK_GATE_D, dev_priv->saveDSPCLK_GATE_D);
/* Cache mode state */
I915_WRITE (CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000);
/* Memory arbitration state */
I915_WRITE (MI_ARB_STATE, dev_priv->saveMI_ARB_STATE | 0xffff0000);
for (i = 0; i < 16; i++) {
I915_WRITE(SWF00 + (i << 2), dev_priv->saveSWF0[i]);
I915_WRITE(SWF10 + (i << 2), dev_priv->saveSWF1[i]);
}
for (i = 0; i < 3; i++)
I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]);
i915_restore_vga(dev);
if (drm_core_check_feature(dev, DRIVER_MODESET))
drm_helper_resume_force_mode(dev);
return 0;
}
int i915_save_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int i;
pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
/* Render Standby */
if (IS_I965G(dev) && IS_MOBILE(dev))
dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
/* Hardware status page */
dev_priv->saveHWS = I915_READ(HWS_PGA);
/* Display arbitration control */
dev_priv->saveDSPARB = I915_READ(DSPARB);
/* This is only meaningful in non-KMS mode */
/* Don't save them in KMS mode */
i915_save_modeset_reg(dev);
/* Cursor state */
dev_priv->saveCURACNTR = I915_READ(CURACNTR);
dev_priv->saveCURAPOS = I915_READ(CURAPOS);
dev_priv->saveCURABASE = I915_READ(CURABASE);
dev_priv->saveCURBCNTR = I915_READ(CURBCNTR);
dev_priv->saveCURBPOS = I915_READ(CURBPOS);
dev_priv->saveCURBBASE = I915_READ(CURBBASE);
if (!IS_I9XX(dev))
dev_priv->saveCURSIZE = I915_READ(CURSIZE);
/* CRT state */
dev_priv->saveADPA = I915_READ(ADPA);
/* LVDS state */
dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
if (IS_I965G(dev))
dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2);
if (IS_MOBILE(dev) && !IS_I830(dev))
dev_priv->saveLVDS = I915_READ(LVDS);
if (!IS_I830(dev) && !IS_845G(dev))
dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL);
dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS);
dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
/* Display Port state */
if (SUPPORTS_INTEGRATED_DP(dev)) {
dev_priv->saveDP_B = I915_READ(DP_B);
dev_priv->saveDP_C = I915_READ(DP_C);
dev_priv->saveDP_D = I915_READ(DP_D);
dev_priv->savePIPEA_GMCH_DATA_M = I915_READ(PIPEA_GMCH_DATA_M);
dev_priv->savePIPEB_GMCH_DATA_M = I915_READ(PIPEB_GMCH_DATA_M);
dev_priv->savePIPEA_GMCH_DATA_N = I915_READ(PIPEA_GMCH_DATA_N);
dev_priv->savePIPEB_GMCH_DATA_N = I915_READ(PIPEB_GMCH_DATA_N);
dev_priv->savePIPEA_DP_LINK_M = I915_READ(PIPEA_DP_LINK_M);
dev_priv->savePIPEB_DP_LINK_M = I915_READ(PIPEB_DP_LINK_M);
dev_priv->savePIPEA_DP_LINK_N = I915_READ(PIPEA_DP_LINK_N);
dev_priv->savePIPEB_DP_LINK_N = I915_READ(PIPEB_DP_LINK_N);
}
/* FIXME: save TV & SDVO state */
/* FBC state */
dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE);
dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE);
dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2);
dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL);
/* Interrupt state */
dev_priv->saveIIR = I915_READ(IIR);
dev_priv->saveIER = I915_READ(IER);
dev_priv->saveIMR = I915_READ(IMR);
/* VGA state */
dev_priv->saveVGA0 = I915_READ(VGA0);
dev_priv->saveVGA1 = I915_READ(VGA1);
dev_priv->saveVGA_PD = I915_READ(VGA_PD);
dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
/* Clock gating state */
dev_priv->saveD_STATE = I915_READ(D_STATE);
dev_priv->saveDSPCLK_GATE_D = I915_READ(DSPCLK_GATE_D);
/* Cache mode state */
dev_priv->saveCACHE_MODE_0 = I915_READ(CACHE_MODE_0);
/* Memory Arbitration state */
dev_priv->saveMI_ARB_STATE = I915_READ(MI_ARB_STATE);
/* Scratch space */
for (i = 0; i < 16; i++) {
dev_priv->saveSWF0[i] = I915_READ(SWF00 + (i << 2));
dev_priv->saveSWF1[i] = I915_READ(SWF10 + (i << 2));
}
for (i = 0; i < 3; i++)
dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
/* Fences */
if (IS_I965G(dev)) {
for (i = 0; i < 16; i++)
dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
} else {
for (i = 0; i < 8; i++)
dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
for (i = 0; i < 8; i++)
dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
}
i915_save_vga(dev);
return 0;
}
