static int
jz4780_timer_start(struct eventtimer *et, sbintime_t first, sbintime_t period)
{
struct jz4780_timer_softc *sc =
(struct jz4780_timer_softc *)et->et_priv;
uint32_t ticks;
ticks = (first * et->et_frequency) / SBT_1S;
if (ticks == 0)
return (EINVAL);
CSR_WRITE_4(sc, JZ_TC_TDFR(5), ticks);
CSR_WRITE_4(sc, JZ_TC_TCNT(5), 0);
CSR_WRITE_4(sc, JZ_TC_TESR, TESR_TCST5);
return (0);
}
void
cpu_initclocks(void)
{
struct cpu_info * const ci = curcpu();
uint32_t cnt;
static struct timecounter tc = {
ingenic_count_read, /* get_timecount */
0, /* no poll_pps */
~0u, /* counter_mask */
12000000, /* frequency */
"Ingenic OS timer", /* name */
100, /* quality */
};
curcpu()->ci_cctr_freq = tc.tc_frequency;
tc_init(&tc);
printf("starting timer interrupt...\n");
/* start the timer interrupt */
cnt = readreg(JZ_OST_CNT_LO);
ci->ci_next_cp0_clk_intr = cnt + ci->ci_cycles_per_hz;
writereg(JZ_TC_TFCR, TFR_OSTFLAG);
writereg(JZ_OST_DATA, ci->ci_next_cp0_clk_intr);
/*
* XXX
* We can use OST or one of the regular timers to generate the 100hz
* interrupt. OST interrupts need to be rescheduled every time and by
* only one core, the regular timer can be programmed to fire every
* 10ms without rescheduling and we'd still use the OST as time base.
* OST is supposed to fire on INT2 although I haven't been able to get
* that to work yet ( all I get is INT0 which is for hardware interrupts
* in general )
* So if we can get OST to fire on INT2 we can just block INT0 on core1
* and have a timer interrupt on both cores, if not the regular timer
* would be more convenient but we'd have to shoot an IPI to core1 on
* every tick.
* For now, use OST and hope we'll figure out how to make it fire on
* INT2.
*/
#ifdef USE_OST
writereg(JZ_TC_TMCR, TFR_OSTFLAG);
#else
writereg(JZ_TC_TECR, TESR_TCST5); /* disable timer 5 */
writereg(JZ_TC_TCNT(5), 0);
writereg(JZ_TC_TDFR(5), 30000); /* 10ms at 48MHz / 16 */
writereg(JZ_TC_TDHR(5), 60000); /* not reached */
writereg(JZ_TC_TCSR(5), TCSR_EXT_EN| TCSR_DIV_16);
writereg(JZ_TC_TMCR, TFR_FFLAG5);
writereg(JZ_TC_TFCR, TFR_FFLAG5);
writereg(JZ_TC_TESR, TESR_TCST5); /* enable timer 5 */
#endif
#ifdef INGENIC_CLOCK_DEBUG
printf("INTC %08x %08x\n", readreg(JZ_ICSR0), readreg(JZ_ICSR1));
printf("ICMR0 %08x\n", readreg(JZ_ICMR0));
#endif
writereg(JZ_ICMCR0, 0x0c000000); /* TCU2, OST */
spl0();
#ifdef INGENIC_CLOCK_DEBUG
printf("TFR: %08x\n", readreg(JZ_TC_TFR));
printf("TMR: %08x\n", readreg(JZ_TC_TMR));
printf("cnt5: %08x\n", readreg(JZ_TC_TCNT(5)));
printf("CR: %08x\n", MFC0(MIPS_COP_0_CAUSE, 0));
printf("SR: %08x\n", MFC0(MIPS_COP_0_STATUS, 0));
delay(100000);
printf("TFR: %08x\n", readreg(JZ_TC_TFR));
printf("TMR: %08x\n", readreg(JZ_TC_TMR));
printf("cnt5: %08x\n", readreg(JZ_TC_TCNT(5)));
printf("CR: %08x\n", MFC0(MIPS_COP_0_CAUSE, 0));
printf("SR: %08x\n", MFC0(MIPS_COP_0_STATUS, 0));
printf("TFR: %08x\n", readreg(JZ_TC_TFR));
printf("TMR: %08x\n", readreg(JZ_TC_TMR));
printf("cnt5: %08x\n", readreg(JZ_TC_TCNT(5)));
printf("CR: %08x\n", MFC0(MIPS_COP_0_CAUSE, 0));
printf("SR: %08x\n", MFC0(MIPS_COP_0_STATUS, 0));
printf("INTC %08x %08x\n", readreg(JZ_ICSR0), readreg(JZ_ICSR1));
delay(3000000);
printf("%s %d\n", __func__, MFC0(12, 3));
printf("%s %08x\n", __func__, MFC0(12, 4));
#endif
}
