/*
* XXX This is a slight hack to get newly-formed processes to
* XXX acquire the kernel lock as soon as they run.
*/
void
proc_trampoline_mp(void)
{
struct proc *p;
p = curproc;
SCHED_ASSERT_UNLOCKED();
KERNEL_PROC_LOCK(p);
}
/*
* Process the tail end of a fork() for the child.
*/
void
child_return(void *arg)
{
struct proc *p = arg;
/*
* Return values in the frame set by cpu_fork().
*/
KERNEL_PROC_UNLOCK(p);
userret(p);
#ifdef KTRACE
if (KTRPOINT(p, KTR_SYSRET)) {
KERNEL_PROC_LOCK(p);
ktrsysret(p, SYS_fork, 0, 0);
KERNEL_PROC_UNLOCK(p);
}
#endif
}
void
osf1_syscall_fancy(struct proc *p, u_int64_t code, struct trapframe *framep)
{
const struct sysent *callp;
int error;
u_int64_t rval[2];
u_int64_t *args, copyargs[10]; /* XXX */
u_int hidden, nargs;
KERNEL_PROC_LOCK(p);
uvmexp.syscalls++;
p->p_md.md_tf = framep;
callp = p->p_emul->e_sysent;
switch (code) {
case OSF1_SYS_syscall:
/* OSF/1 syscall() */
code = framep->tf_regs[FRAME_A0];
hidden = 1;
break;
default:
hidden = 0;
break;
}
code &= (OSF1_SYS_NSYSENT - 1);
callp += code;
nargs = callp->sy_narg + hidden;
switch (nargs) {
default:
error = copyin((caddr_t)alpha_pal_rdusp(), ©args[6],
(nargs - 6) * sizeof(u_int64_t));
if (error)
goto bad;
case 6:
copyargs[5] = framep->tf_regs[FRAME_A5];
case 5:
copyargs[4] = framep->tf_regs[FRAME_A4];
case 4:
copyargs[3] = framep->tf_regs[FRAME_A3];
copyargs[2] = framep->tf_regs[FRAME_A2];
copyargs[1] = framep->tf_regs[FRAME_A1];
copyargs[0] = framep->tf_regs[FRAME_A0];
args = copyargs;
break;
case 3:
case 2:
case 1:
case 0:
args = &framep->tf_regs[FRAME_A0];
break;
}
args += hidden;
#ifdef KTRACE
if (KTRPOINT(p, KTR_SYSCALL))
ktrsyscall(p, code, callp->sy_argsize, args);
#endif
#ifdef SYSCALL_DEBUG
scdebug_call(p, code, args);
#endif
rval[0] = 0;
rval[1] = 0;
error = (*callp->sy_call)(p, args, rval);
switch (error) {
case 0:
framep->tf_regs[FRAME_V0] = rval[0];
framep->tf_regs[FRAME_A4] = rval[1];
framep->tf_regs[FRAME_A3] = 0;
break;
case ERESTART:
framep->tf_regs[FRAME_PC] -= 4;
break;
case EJUSTRETURN:
break;
default:
bad:
error = native_to_osf1_errno[error];
framep->tf_regs[FRAME_V0] = error;
framep->tf_regs[FRAME_A3] = 1;
break;
}
#ifdef SYSCALL_DEBUG
scdebug_ret(p, code, error, rval);
#endif
KERNEL_PROC_UNLOCK(p);
userret(p);
#ifdef KTRACE
if (KTRPOINT(p, KTR_SYSRET)) {
KERNEL_PROC_LOCK(p);
ktrsysret(p, code, error, rval[0]);
KERNEL_PROC_UNLOCK(p);
}
#endif
}
void
m88110_trap(unsigned type, struct trapframe *frame)
{
struct proc *p;
struct vm_map *map;
vaddr_t va, pcb_onfault;
vm_prot_t ftype;
int fault_type;
u_long fault_code;
unsigned fault_addr;
struct vmspace *vm;
union sigval sv;
int result;
#ifdef DDB
int s;
u_int psr;
#endif
int sig = 0;
pt_entry_t *pte;
extern struct vm_map *kernel_map;
extern pt_entry_t *pmap_pte(pmap_t, vaddr_t);
uvmexp.traps++;
if ((p = curproc) == NULL)
p = &proc0;
if (USERMODE(frame->tf_epsr)) {
type += T_USER;
p->p_md.md_tf = frame; /* for ptrace/signals */
}
fault_type = 0;
fault_code = 0;
fault_addr = frame->tf_exip & XIP_ADDR;
switch (type) {
default:
panictrap(frame->tf_vector, frame);
break;
/*NOTREACHED*/
case T_110_DRM+T_USER:
case T_110_DRM:
#ifdef DEBUG
printf("DMMU read miss: Hardware Table Searches should be enabled!\n");
#endif
panictrap(frame->tf_vector, frame);
break;
/*NOTREACHED*/
case T_110_DWM+T_USER:
case T_110_DWM:
#ifdef DEBUG
printf("DMMU write miss: Hardware Table Searches should be enabled!\n");
#endif
panictrap(frame->tf_vector, frame);
break;
/*NOTREACHED*/
case T_110_IAM+T_USER:
case T_110_IAM:
#ifdef DEBUG
printf("IMMU miss: Hardware Table Searches should be enabled!\n");
#endif
panictrap(frame->tf_vector, frame);
break;
/*NOTREACHED*/
#ifdef DDB
case T_KDB_TRACE:
s = splhigh();
set_psr((psr = get_psr()) & ~PSR_IND);
ddb_break_trap(T_KDB_TRACE, (db_regs_t*)frame);
set_psr(psr);
splx(s);
return;
case T_KDB_BREAK:
s = splhigh();
set_psr((psr = get_psr()) & ~PSR_IND);
ddb_break_trap(T_KDB_BREAK, (db_regs_t*)frame);
set_psr(psr);
splx(s);
return;
case T_KDB_ENTRY:
s = splhigh();
set_psr((psr = get_psr()) & ~PSR_IND);
ddb_entry_trap(T_KDB_ENTRY, (db_regs_t*)frame);
set_psr(psr);
/* skip one instruction */
if (frame->tf_exip & 1)
frame->tf_exip = frame->tf_enip;
else
frame->tf_exip += 4;
splx(s);
return;
#if 0
case T_ILLFLT:
s = splhigh();
set_psr((psr = get_psr()) & ~PSR_IND);
ddb_error_trap(type == T_ILLFLT ? "unimplemented opcode" :
"error fault", (db_regs_t*)frame);
set_psr(psr);
splx(s);
return;
#endif /* 0 */
#endif /* DDB */
case T_ILLFLT:
printf("Unimplemented opcode!\n");
panictrap(frame->tf_vector, frame);
break;
case T_NON_MASK:
case T_NON_MASK+T_USER:
curcpu()->ci_intrdepth++;
md_interrupt_func(T_NON_MASK, frame);
curcpu()->ci_intrdepth--;
return;
case T_INT:
case T_INT+T_USER:
curcpu()->ci_intrdepth++;
md_interrupt_func(T_INT, frame);
curcpu()->ci_intrdepth--;
return;
case T_MISALGNFLT:
printf("kernel mode misaligned access exception @ 0x%08x\n",
frame->tf_exip);
panictrap(frame->tf_vector, frame);
break;
/*NOTREACHED*/
case T_INSTFLT:
/* kernel mode instruction access fault.
* Should never, never happen for a non-paged kernel.
*/
#ifdef TRAPDEBUG
printf("Kernel Instruction fault exip %x isr %x ilar %x\n",
frame->tf_exip, frame->tf_isr, frame->tf_ilar);
#endif
panictrap(frame->tf_vector, frame);
break;
/*NOTREACHED*/
case T_DATAFLT:
/* kernel mode data fault */
/* data fault on the user address? */
if ((frame->tf_dsr & CMMU_DSR_SU) == 0) {
type = T_DATAFLT + T_USER;
goto m88110_user_fault;
}
#ifdef TRAPDEBUG
printf("Kernel Data access fault exip %x dsr %x dlar %x\n",
frame->tf_exip, frame->tf_dsr, frame->tf_dlar);
#endif
fault_addr = frame->tf_dlar;
if (frame->tf_dsr & CMMU_DSR_RW) {
ftype = VM_PROT_READ;
fault_code = VM_PROT_READ;
} else {
ftype = VM_PROT_READ|VM_PROT_WRITE;
fault_code = VM_PROT_WRITE;
}
va = trunc_page((vaddr_t)fault_addr);
if (va == 0) {
panic("trap: bad kernel access at %x", fault_addr);
}
KERNEL_LOCK(LK_CANRECURSE | LK_EXCLUSIVE);
vm = p->p_vmspace;
map = kernel_map;
if (frame->tf_dsr & (CMMU_DSR_SI | CMMU_DSR_PI)) {
frame->tf_dsr &= ~CMMU_DSR_WE; /* undefined */
/*
* On a segment or a page fault, call uvm_fault() to
* resolve the fault.
*/
if ((pcb_onfault = p->p_addr->u_pcb.pcb_onfault) != 0)
p->p_addr->u_pcb.pcb_onfault = 0;
result = uvm_fault(map, va, VM_FAULT_INVALID, ftype);
p->p_addr->u_pcb.pcb_onfault = pcb_onfault;
if (result == 0) {
KERNEL_UNLOCK();
return;
}
}
if (frame->tf_dsr & CMMU_DSR_WE) { /* write fault */
/*
* This could be a write protection fault or an
* exception to set the used and modified bits
* in the pte. Basically, if we got a write error,
* then we already have a pte entry that faulted
* in from a previous seg fault or page fault.
* Get the pte and check the status of the
* modified and valid bits to determine if this
* indeed a real write fault. XXX smurph
*/
pte = pmap_pte(map->pmap, va);
#ifdef DEBUG
if (pte == NULL) {
KERNEL_UNLOCK();
panic("NULL pte on write fault??");
}
#endif
if (!(*pte & PG_M) && !(*pte & PG_RO)) {
/* Set modified bit and try the write again. */
#ifdef TRAPDEBUG
printf("Corrected kernel write fault, map %x pte %x\n",
map->pmap, *pte);
#endif
*pte |= PG_M;
KERNEL_UNLOCK();
return;
#if 1 /* shouldn't happen */
} else {
/* must be a real wp fault */
#ifdef TRAPDEBUG
printf("Uncorrected kernel write fault, map %x pte %x\n",
map->pmap, *pte);
#endif
if ((pcb_onfault = p->p_addr->u_pcb.pcb_onfault) != 0)
p->p_addr->u_pcb.pcb_onfault = 0;
result = uvm_fault(map, va, VM_FAULT_INVALID, ftype);
p->p_addr->u_pcb.pcb_onfault = pcb_onfault;
if (result == 0) {
KERNEL_UNLOCK();
return;
}
#endif
}
}
KERNEL_UNLOCK();
panictrap(frame->tf_vector, frame);
/* NOTREACHED */
case T_INSTFLT+T_USER:
/* User mode instruction access fault */
/* FALLTHROUGH */
case T_DATAFLT+T_USER:
m88110_user_fault:
if (type == T_INSTFLT+T_USER) {
ftype = VM_PROT_READ;
fault_code = VM_PROT_READ;
#ifdef TRAPDEBUG
printf("User Instruction fault exip %x isr %x ilar %x\n",
frame->tf_exip, frame->tf_isr, frame->tf_ilar);
#endif
} else {
fault_addr = frame->tf_dlar;
if (frame->tf_dsr & CMMU_DSR_RW) {
ftype = VM_PROT_READ;
fault_code = VM_PROT_READ;
} else {
ftype = VM_PROT_READ|VM_PROT_WRITE;
fault_code = VM_PROT_WRITE;
}
#ifdef TRAPDEBUG
printf("User Data access fault exip %x dsr %x dlar %x\n",
frame->tf_exip, frame->tf_dsr, frame->tf_dlar);
#endif
}
va = trunc_page((vaddr_t)fault_addr);
KERNEL_PROC_LOCK(p);
vm = p->p_vmspace;
map = &vm->vm_map;
if ((pcb_onfault = p->p_addr->u_pcb.pcb_onfault) != 0)
p->p_addr->u_pcb.pcb_onfault = 0;
/*
* Call uvm_fault() to resolve non-bus error faults
* whenever possible.
*/
if (type == T_DATAFLT+T_USER) {
/* data faults */
if (frame->tf_dsr & CMMU_DSR_BE) {
/* bus error */
result = EACCES;
} else
if (frame->tf_dsr & (CMMU_DSR_SI | CMMU_DSR_PI)) {
/* segment or page fault */
result = uvm_fault(map, va, VM_FAULT_INVALID, ftype);
p->p_addr->u_pcb.pcb_onfault = pcb_onfault;
} else
if (frame->tf_dsr & (CMMU_DSR_CP | CMMU_DSR_WA)) {
/* copyback or write allocate error */
result = EACCES;
} else
if (frame->tf_dsr & CMMU_DSR_WE) {
/* write fault */
/* This could be a write protection fault or an
* exception to set the used and modified bits
* in the pte. Basically, if we got a write
* error, then we already have a pte entry that
* faulted in from a previous seg fault or page
* fault.
* Get the pte and check the status of the
* modified and valid bits to determine if this
* indeed a real write fault. XXX smurph
*/
pte = pmap_pte(vm_map_pmap(map), va);
#ifdef DEBUG
if (pte == NULL) {
KERNEL_PROC_UNLOCK(p);
panic("NULL pte on write fault??");
}
#endif
if (!(*pte & PG_M) && !(*pte & PG_RO)) {
/*
* Set modified bit and try the
* write again.
*/
#ifdef TRAPDEBUG
printf("Corrected userland write fault, map %x pte %x\n",
map->pmap, *pte);
#endif
*pte |= PG_M;
/*
* invalidate ATCs to force
* table search
*/
set_dcmd(CMMU_DCMD_INV_UATC);
KERNEL_PROC_UNLOCK(p);
return;
} else {
/* must be a real wp fault */
#ifdef TRAPDEBUG
printf("Uncorrected userland write fault, map %x pte %x\n",
map->pmap, *pte);
#endif
result = uvm_fault(map, va, VM_FAULT_INVALID, ftype);
p->p_addr->u_pcb.pcb_onfault = pcb_onfault;
}
} else {
#ifdef TRAPDEBUG
printf("Unexpected Data access fault dsr %x\n",
frame->tf_dsr);
#endif
KERNEL_PROC_UNLOCK(p);
panictrap(frame->tf_vector, frame);
}
} else {
/* instruction faults */
if (frame->tf_isr &
(CMMU_ISR_BE | CMMU_ISR_SP | CMMU_ISR_TBE)) {
/* bus error, supervisor protection */
result = EACCES;
} else
if (frame->tf_isr & (CMMU_ISR_SI | CMMU_ISR_PI)) {
/* segment or page fault */
result = uvm_fault(map, va, VM_FAULT_INVALID, ftype);
p->p_addr->u_pcb.pcb_onfault = pcb_onfault;
} else {
#ifdef TRAPDEBUG
printf("Unexpected Instruction fault isr %x\n",
frame->tf_isr);
#endif
KERNEL_PROC_UNLOCK(p);
panictrap(frame->tf_vector, frame);
}
}
if ((caddr_t)va >= vm->vm_maxsaddr) {
if (result == 0)
uvm_grow(p, va);
else if (result == EACCES)
result = EFAULT;
}
KERNEL_PROC_UNLOCK(p);
/*
* This could be a fault caused in copyin*()
* while accessing user space.
*/
if (result != 0 && pcb_onfault != 0) {
frame->tf_exip = pcb_onfault;
/*
* Continue as if the fault had been resolved.
*/
result = 0;
}
if (result != 0) {
sig = result == EACCES ? SIGBUS : SIGSEGV;
fault_type = result == EACCES ?
BUS_ADRERR : SEGV_MAPERR;
}
break;
case T_MISALGNFLT+T_USER:
/* Fix any misaligned ld.d or st.d instructions */
sig = double_reg_fixup(frame);
fault_type = BUS_ADRALN;
break;
case T_PRIVINFLT+T_USER:
case T_ILLFLT+T_USER:
#ifndef DDB
case T_KDB_BREAK:
case T_KDB_ENTRY:
case T_KDB_TRACE:
#endif
case T_KDB_BREAK+T_USER:
case T_KDB_ENTRY+T_USER:
case T_KDB_TRACE+T_USER:
sig = SIGILL;
break;
case T_BNDFLT+T_USER:
sig = SIGFPE;
break;
case T_ZERODIV+T_USER:
sig = SIGFPE;
fault_type = FPE_INTDIV;
break;
case T_OVFFLT+T_USER:
sig = SIGFPE;
fault_type = FPE_INTOVF;
break;
case T_FPEPFLT+T_USER:
sig = SIGFPE;
break;
case T_SIGSYS+T_USER:
sig = SIGSYS;
break;
case T_STEPBPT+T_USER:
#ifdef PTRACE
/*
* This trap is used by the kernel to support single-step
* debugging (although any user could generate this trap
* which should probably be handled differently). When a
* process is continued by a debugger with the PT_STEP
* function of ptrace (single step), the kernel inserts
* one or two breakpoints in the user process so that only
* one instruction (or two in the case of a delayed branch)
* is executed. When this breakpoint is hit, we get the
* T_STEPBPT trap.
*/
{
u_int instr;
vaddr_t pc = PC_REGS(&frame->tf_regs);
/* read break instruction */
copyin((caddr_t)pc, &instr, sizeof(u_int));
/* check and see if we got here by accident */
if ((p->p_md.md_bp0va != pc &&
p->p_md.md_bp1va != pc) ||
instr != SSBREAKPOINT) {
sig = SIGTRAP;
fault_type = TRAP_TRACE;
break;
}
/* restore original instruction and clear breakpoint */
if (p->p_md.md_bp0va == pc) {
ss_put_value(p, pc, p->p_md.md_bp0save);
p->p_md.md_bp0va = 0;
}
if (p->p_md.md_bp1va == pc) {
ss_put_value(p, pc, p->p_md.md_bp1save);
p->p_md.md_bp1va = 0;
}
sig = SIGTRAP;
fault_type = TRAP_BRKPT;
}
#else
sig = SIGTRAP;
fault_type = TRAP_TRACE;
#endif
break;
case T_USERBPT+T_USER:
/*
* This trap is meant to be used by debuggers to implement
* breakpoint debugging. When we get this trap, we just
* return a signal which gets caught by the debugger.
*/
sig = SIGTRAP;
fault_type = TRAP_BRKPT;
break;
case T_ASTFLT+T_USER:
uvmexp.softs++;
p->p_md.md_astpending = 0;
if (p->p_flag & P_OWEUPC) {
KERNEL_PROC_LOCK(p);
ADDUPROF(p);
KERNEL_PROC_UNLOCK(p);
}
if (curcpu()->ci_want_resched)
preempt(NULL);
break;
}
/*
* If trap from supervisor mode, just return
*/
if (type < T_USER)
return;
if (sig) {
sv.sival_int = fault_addr;
KERNEL_PROC_LOCK(p);
trapsignal(p, sig, fault_code, fault_type, sv);
KERNEL_PROC_UNLOCK(p);
}
userret(p);
}
void
m88100_trap(unsigned type, struct trapframe *frame)
{
struct proc *p;
struct vm_map *map;
vaddr_t va, pcb_onfault;
vm_prot_t ftype;
int fault_type, pbus_type;
u_long fault_code;
unsigned fault_addr;
struct vmspace *vm;
union sigval sv;
int result;
#ifdef DDB
int s;
u_int psr;
#endif
int sig = 0;
extern struct vm_map *kernel_map;
uvmexp.traps++;
if ((p = curproc) == NULL)
p = &proc0;
if (USERMODE(frame->tf_epsr)) {
type += T_USER;
p->p_md.md_tf = frame; /* for ptrace/signals */
}
fault_type = 0;
fault_code = 0;
fault_addr = frame->tf_sxip & XIP_ADDR;
switch (type) {
default:
panictrap(frame->tf_vector, frame);
break;
/*NOTREACHED*/
#if defined(DDB)
case T_KDB_BREAK:
s = splhigh();
set_psr((psr = get_psr()) & ~PSR_IND);
ddb_break_trap(T_KDB_BREAK, (db_regs_t*)frame);
set_psr(psr);
splx(s);
return;
case T_KDB_ENTRY:
s = splhigh();
set_psr((psr = get_psr()) & ~PSR_IND);
ddb_entry_trap(T_KDB_ENTRY, (db_regs_t*)frame);
set_psr(psr);
splx(s);
return;
#endif /* DDB */
case T_ILLFLT:
printf("Unimplemented opcode!\n");
panictrap(frame->tf_vector, frame);
break;
case T_INT:
case T_INT+T_USER:
curcpu()->ci_intrdepth++;
md_interrupt_func(T_INT, frame);
curcpu()->ci_intrdepth--;
return;
case T_MISALGNFLT:
printf("kernel misaligned access exception @ 0x%08x\n",
frame->tf_sxip);
panictrap(frame->tf_vector, frame);
break;
case T_INSTFLT:
/* kernel mode instruction access fault.
* Should never, never happen for a non-paged kernel.
*/
#ifdef TRAPDEBUG
pbus_type = CMMU_PFSR_FAULT(frame->tf_ipfsr);
printf("Kernel Instruction fault #%d (%s) v = 0x%x, frame 0x%x cpu %p\n",
pbus_type, pbus_exception_type[pbus_type],
fault_addr, frame, frame->tf_cpu);
#endif
panictrap(frame->tf_vector, frame);
break;
case T_DATAFLT:
/* kernel mode data fault */
/* data fault on the user address? */
if ((frame->tf_dmt0 & DMT_DAS) == 0) {
type = T_DATAFLT + T_USER;
goto user_fault;
}
fault_addr = frame->tf_dma0;
if (frame->tf_dmt0 & (DMT_WRITE|DMT_LOCKBAR)) {
ftype = VM_PROT_READ|VM_PROT_WRITE;
fault_code = VM_PROT_WRITE;
} else {
ftype = VM_PROT_READ;
fault_code = VM_PROT_READ;
}
va = trunc_page((vaddr_t)fault_addr);
if (va == 0) {
panic("trap: bad kernel access at %x", fault_addr);
}
KERNEL_LOCK(LK_CANRECURSE | LK_EXCLUSIVE);
vm = p->p_vmspace;
map = kernel_map;
pbus_type = CMMU_PFSR_FAULT(frame->tf_dpfsr);
#ifdef TRAPDEBUG
printf("Kernel Data access fault #%d (%s) v = 0x%x, frame 0x%x cpu %p\n",
pbus_type, pbus_exception_type[pbus_type],
fault_addr, frame, frame->tf_cpu);
#endif
switch (pbus_type) {
case CMMU_PFSR_SUCCESS:
/*
* The fault was resolved. Call data_access_emulation
* to drain the data unit pipe line and reset dmt0
* so that trap won't get called again.
*/
data_access_emulation((unsigned *)frame);
frame->tf_dpfsr = 0;
frame->tf_dmt0 = 0;
KERNEL_UNLOCK();
return;
case CMMU_PFSR_SFAULT:
case CMMU_PFSR_PFAULT:
if ((pcb_onfault = p->p_addr->u_pcb.pcb_onfault) != 0)
p->p_addr->u_pcb.pcb_onfault = 0;
result = uvm_fault(map, va, VM_FAULT_INVALID, ftype);
p->p_addr->u_pcb.pcb_onfault = pcb_onfault;
if (result == 0) {
/*
* We could resolve the fault. Call
* data_access_emulation to drain the data
* unit pipe line and reset dmt0 so that trap
* won't get called again.
*/
data_access_emulation((unsigned *)frame);
frame->tf_dpfsr = 0;
frame->tf_dmt0 = 0;
KERNEL_UNLOCK();
return;
}
break;
}
#ifdef TRAPDEBUG
printf("PBUS Fault %d (%s) va = 0x%x\n", pbus_type,
pbus_exception_type[pbus_type], va);
#endif
KERNEL_UNLOCK();
panictrap(frame->tf_vector, frame);
/* NOTREACHED */
case T_INSTFLT+T_USER:
/* User mode instruction access fault */
/* FALLTHROUGH */
case T_DATAFLT+T_USER:
user_fault:
if (type == T_INSTFLT + T_USER) {
pbus_type = CMMU_PFSR_FAULT(frame->tf_ipfsr);
#ifdef TRAPDEBUG
printf("User Instruction fault #%d (%s) v = 0x%x, frame 0x%x cpu %p\n",
pbus_type, pbus_exception_type[pbus_type],
fault_addr, frame, frame->tf_cpu);
#endif
} else {
fault_addr = frame->tf_dma0;
pbus_type = CMMU_PFSR_FAULT(frame->tf_dpfsr);
#ifdef TRAPDEBUG
printf("User Data access fault #%d (%s) v = 0x%x, frame 0x%x cpu %p\n",
pbus_type, pbus_exception_type[pbus_type],
fault_addr, frame, frame->tf_cpu);
#endif
}
if (frame->tf_dmt0 & (DMT_WRITE | DMT_LOCKBAR)) {
ftype = VM_PROT_READ | VM_PROT_WRITE;
fault_code = VM_PROT_WRITE;
} else {
ftype = VM_PROT_READ;
fault_code = VM_PROT_READ;
}
va = trunc_page((vaddr_t)fault_addr);
KERNEL_PROC_LOCK(p);
vm = p->p_vmspace;
map = &vm->vm_map;
if ((pcb_onfault = p->p_addr->u_pcb.pcb_onfault) != 0)
p->p_addr->u_pcb.pcb_onfault = 0;
/* Call uvm_fault() to resolve non-bus error faults */
switch (pbus_type) {
case CMMU_PFSR_SUCCESS:
result = 0;
break;
case CMMU_PFSR_BERROR:
result = EACCES;
break;
default:
result = uvm_fault(map, va, VM_FAULT_INVALID, ftype);
break;
}
p->p_addr->u_pcb.pcb_onfault = pcb_onfault;
if ((caddr_t)va >= vm->vm_maxsaddr) {
if (result == 0)
uvm_grow(p, va);
else if (result == EACCES)
result = EFAULT;
}
KERNEL_PROC_UNLOCK(p);
/*
* This could be a fault caused in copyin*()
* while accessing user space.
*/
if (result != 0 && pcb_onfault != 0) {
frame->tf_snip = pcb_onfault | NIP_V;
frame->tf_sfip = (pcb_onfault + 4) | FIP_V;
frame->tf_sxip = 0;
/*
* Continue as if the fault had been resolved, but
* do not try to complete the faulting access.
*/
frame->tf_dmt0 |= DMT_SKIP;
result = 0;
}
if (result == 0) {
if (type == T_DATAFLT+T_USER) {
/*
* We could resolve the fault. Call
* data_access_emulation to drain the data unit
* pipe line and reset dmt0 so that trap won't
* get called again.
*/
data_access_emulation((unsigned *)frame);
frame->tf_dpfsr = 0;
frame->tf_dmt0 = 0;
} else {
/*
* back up SXIP, SNIP,
* clearing the Error bit
*/
frame->tf_sfip = frame->tf_snip & ~FIP_E;
frame->tf_snip = frame->tf_sxip & ~NIP_E;
frame->tf_ipfsr = 0;
}
} else {
sig = result == EACCES ? SIGBUS : SIGSEGV;
fault_type = result == EACCES ?
BUS_ADRERR : SEGV_MAPERR;
}
break;
case T_MISALGNFLT+T_USER:
/* Fix any misaligned ld.d or st.d instructions */
sig = double_reg_fixup(frame);
fault_type = BUS_ADRALN;
break;
case T_PRIVINFLT+T_USER:
case T_ILLFLT+T_USER:
#ifndef DDB
case T_KDB_BREAK:
case T_KDB_ENTRY:
#endif
case T_KDB_BREAK+T_USER:
case T_KDB_ENTRY+T_USER:
case T_KDB_TRACE:
case T_KDB_TRACE+T_USER:
sig = SIGILL;
break;
case T_BNDFLT+T_USER:
sig = SIGFPE;
break;
case T_ZERODIV+T_USER:
sig = SIGFPE;
fault_type = FPE_INTDIV;
break;
case T_OVFFLT+T_USER:
sig = SIGFPE;
fault_type = FPE_INTOVF;
break;
case T_FPEPFLT+T_USER:
sig = SIGFPE;
break;
case T_SIGSYS+T_USER:
sig = SIGSYS;
break;
case T_STEPBPT+T_USER:
#ifdef PTRACE
/*
* This trap is used by the kernel to support single-step
* debugging (although any user could generate this trap
* which should probably be handled differently). When a
* process is continued by a debugger with the PT_STEP
* function of ptrace (single step), the kernel inserts
* one or two breakpoints in the user process so that only
* one instruction (or two in the case of a delayed branch)
* is executed. When this breakpoint is hit, we get the
* T_STEPBPT trap.
*/
{
u_int instr;
vaddr_t pc = PC_REGS(&frame->tf_regs);
/* read break instruction */
copyin((caddr_t)pc, &instr, sizeof(u_int));
/* check and see if we got here by accident */
if ((p->p_md.md_bp0va != pc &&
p->p_md.md_bp1va != pc) ||
instr != SSBREAKPOINT) {
sig = SIGTRAP;
fault_type = TRAP_TRACE;
break;
}
/* restore original instruction and clear breakpoint */
if (p->p_md.md_bp0va == pc) {
ss_put_value(p, pc, p->p_md.md_bp0save);
p->p_md.md_bp0va = 0;
}
if (p->p_md.md_bp1va == pc) {
ss_put_value(p, pc, p->p_md.md_bp1save);
p->p_md.md_bp1va = 0;
}
#if 1
frame->tf_sfip = frame->tf_snip;
frame->tf_snip = pc | NIP_V;
#endif
sig = SIGTRAP;
fault_type = TRAP_BRKPT;
}
#else
sig = SIGTRAP;
fault_type = TRAP_TRACE;
#endif
break;
case T_USERBPT+T_USER:
/*
* This trap is meant to be used by debuggers to implement
* breakpoint debugging. When we get this trap, we just
* return a signal which gets caught by the debugger.
*/
frame->tf_sfip = frame->tf_snip;
frame->tf_snip = frame->tf_sxip;
sig = SIGTRAP;
fault_type = TRAP_BRKPT;
break;
case T_ASTFLT+T_USER:
uvmexp.softs++;
p->p_md.md_astpending = 0;
if (p->p_flag & P_OWEUPC) {
KERNEL_PROC_LOCK(p);
ADDUPROF(p);
KERNEL_PROC_UNLOCK(p);
}
if (curcpu()->ci_want_resched)
preempt(NULL);
break;
}
/*
* If trap from supervisor mode, just return
*/
if (type < T_USER)
return;
if (sig) {
sv.sival_int = fault_addr;
KERNEL_PROC_LOCK(p);
trapsignal(p, sig, fault_code, fault_type, sv);
KERNEL_PROC_UNLOCK(p);
/*
* don't want multiple faults - we are going to
* deliver signal.
*/
frame->tf_dmt0 = 0;
frame->tf_ipfsr = frame->tf_dpfsr = 0;
}
userret(p);
}
/* Instruction pointers operate differently on mc88110 */
void
m88110_syscall(register_t code, struct trapframe *tf)
{
int i, nsys, nap;
struct sysent *callp;
struct proc *p;
int error;
register_t args[8], rval[2], *ap;
uvmexp.syscalls++;
p = curproc;
callp = p->p_emul->e_sysent;
nsys = p->p_emul->e_nsysent;
p->p_md.md_tf = tf;
/*
* For 88k, all the arguments are passed in the registers (r2-r9),
* and further arguments (if any) on stack.
* For syscall (and __syscall), r2 (and r3) has the actual code.
* __syscall takes a quad syscall number, so that other
* arguments are at their natural alignments.
*/
ap = &tf->tf_r[2];
nap = 8; /* r2-r9 */
switch (code) {
case SYS_syscall:
code = *ap++;
nap--;
break;
case SYS___syscall:
if (callp != sysent)
break;
code = ap[_QUAD_LOWWORD];
ap += 2;
nap -= 2;
break;
}
if (code < 0 || code >= nsys)
callp += p->p_emul->e_nosys;
else
callp += code;
i = callp->sy_argsize / sizeof(register_t);
if (i > sizeof(args) > sizeof(register_t))
panic("syscall nargs");
if (i > nap) {
bcopy((caddr_t)ap, (caddr_t)args, nap * sizeof(register_t));
error = copyin((caddr_t)tf->tf_r[31], (caddr_t)(args + nap),
(i - nap) * sizeof(register_t));
} else {
bcopy((caddr_t)ap, (caddr_t)args, i * sizeof(register_t));
error = 0;
}
if (error != 0)
goto bad;
KERNEL_PROC_LOCK(p);
#ifdef SYSCALL_DEBUG
scdebug_call(p, code, args);
#endif
#ifdef KTRACE
if (KTRPOINT(p, KTR_SYSCALL))
ktrsyscall(p, code, callp->sy_argsize, args);
#endif
rval[0] = 0;
rval[1] = tf->tf_r[3];
#if NSYSTRACE > 0
if (ISSET(p->p_flag, P_SYSTRACE))
error = systrace_redirect(code, p, args, rval);
else
#endif
error = (*callp->sy_call)(p, args, rval);
/*
* system call will look like:
* or r13, r0, <code>
* tb0 0, r0, <128> <- exip
* br err <- enip
* jmp r1
* err: or.u r3, r0, hi16(errno)
* st r2, r3, lo16(errno)
* subu r2, r0, 1
* jmp r1
*
* So, when we take syscall trap, exip/enip will be as
* shown above.
* Given this,
* 1. If the system call returned 0, need to jmp r1.
* exip += 8
* 2. If the system call returned an errno > 0, increment
* exip += 4 and plug the value in r2. This will have us
* executing "br err" on return to user space.
* 3. If the system call code returned ERESTART,
* we need to rexecute the trap instruction. leave exip as is.
* 4. If the system call returned EJUSTRETURN, just return.
* exip += 4
*/
KERNEL_PROC_UNLOCK(p);
switch (error) {
case 0:
tf->tf_r[2] = rval[0];
tf->tf_r[3] = rval[1];
tf->tf_epsr &= ~PSR_C;
/* skip two instructions */
if (tf->tf_exip & 1)
tf->tf_exip = tf->tf_enip + 4;
else
tf->tf_exip += 4 + 4;
break;
case ERESTART:
/*
* Reexecute the trap.
* exip is already at the trap instruction, so
* there is nothing to do.
*/
tf->tf_epsr &= ~PSR_C;
break;
case EJUSTRETURN:
tf->tf_epsr &= ~PSR_C;
/* skip one instruction */
if (tf->tf_exip & 1)
tf->tf_exip = tf->tf_enip;
else
tf->tf_exip += 4;
break;
default:
bad:
if (p->p_emul->e_errno)
error = p->p_emul->e_errno[error];
tf->tf_r[2] = error;
tf->tf_epsr |= PSR_C; /* fail */
/* skip one instruction */
if (tf->tf_exip & 1)
tf->tf_exip = tf->tf_enip;
else
tf->tf_exip += 4;
break;
}
#ifdef SYSCALL_DEBUG
KERNEL_PROC_LOCK(p);
scdebug_ret(p, code, error, rval);
KERNEL_PROC_UNLOCK(p);
#endif
userret(p);
#ifdef KTRACE
if (KTRPOINT(p, KTR_SYSRET)) {
KERNEL_PROC_LOCK(p);
ktrsysret(p, code, error, rval[0]);
KERNEL_PROC_UNLOCK(p);
}
#endif
}
/*ARGSUSED*/
void
trap(struct trapframe *frame)
{
struct proc *p = curproc;
int type = (int)frame->tf_trapno;
struct pcb *pcb;
extern char doreti_iret[], resume_iret[];
caddr_t onfault;
int error;
uint64_t cr2;
union sigval sv;
uvmexp.traps++;
pcb = (p != NULL && p->p_addr != NULL) ? &p->p_addr->u_pcb : NULL;
#ifdef DEBUG
if (trapdebug) {
printf("trap %d code %lx rip %lx cs %lx rflags %lx cr2 %lx "
"cpl %x\n",
type, frame->tf_err, frame->tf_rip, frame->tf_cs,
frame->tf_rflags, rcr2(), curcpu()->ci_ilevel);
printf("curproc %p\n", curproc);
if (curproc)
printf("pid %d\n", p->p_pid);
}
#endif
if (!KERNELMODE(frame->tf_cs, frame->tf_rflags)) {
type |= T_USER;
p->p_md.md_regs = frame;
}
switch (type) {
default:
we_re_toast:
#ifdef KGDB
if (kgdb_trap(type, frame))
return;
else {
/*
* If this is a breakpoint, don't panic
* if we're not connected.
*/
if (type == T_BPTFLT) {
printf("kgdb: ignored %s\n", trap_type[type]);
return;
}
}
#endif
#ifdef DDB
if (kdb_trap(type, 0, frame))
return;
#endif
if (frame->tf_trapno < trap_types)
printf("fatal %s", trap_type[frame->tf_trapno]);
else
printf("unknown trap %ld", (u_long)frame->tf_trapno);
printf(" in %s mode\n", (type & T_USER) ? "user" : "supervisor");
printf("trap type %d code %lx rip %lx cs %lx rflags %lx cr2 "
" %lx cpl %x rsp %lx\n",
type, frame->tf_err, (u_long)frame->tf_rip, frame->tf_cs,
frame->tf_rflags, rcr2(), curcpu()->ci_ilevel, frame->tf_rsp);
panic("trap type %d, code=%lx, pc=%lx",
type, frame->tf_err, frame->tf_rip);
/*NOTREACHED*/
case T_PROTFLT:
case T_SEGNPFLT:
case T_ALIGNFLT:
case T_TSSFLT:
if (p == NULL)
goto we_re_toast;
/* Check for copyin/copyout fault. */
if (pcb->pcb_onfault != 0) {
error = EFAULT;
copyfault:
frame->tf_rip = (u_int64_t)pcb->pcb_onfault;
frame->tf_rax = error;
return;
}
/*
* Check for failure during return to user mode.
* We do this by looking at the address of the
* instruction that faulted.
*/
if (frame->tf_rip == (u_int64_t)doreti_iret) {
frame->tf_rip = (u_int64_t)resume_iret;
return;
}
goto we_re_toast;
case T_PROTFLT|T_USER: /* protection fault */
case T_TSSFLT|T_USER:
case T_SEGNPFLT|T_USER:
case T_STKFLT|T_USER:
case T_NMI|T_USER:
#ifdef TRAP_SIGDEBUG
printf("pid %d (%s): BUS at rip %lx addr %lx\n",
p->p_pid, p->p_comm, frame->tf_rip, rcr2());
frame_dump(frame);
#endif
sv.sival_ptr = (void *)frame->tf_rip;
KERNEL_PROC_LOCK(p);
trapsignal(p, SIGBUS, type & ~T_USER, BUS_OBJERR, sv);
KERNEL_PROC_UNLOCK(p);
goto out;
case T_ALIGNFLT|T_USER:
sv.sival_ptr = (void *)frame->tf_rip;
KERNEL_PROC_LOCK(p);
trapsignal(p, SIGBUS, type & ~T_USER, BUS_ADRALN, sv);
KERNEL_PROC_UNLOCK(p);
goto out;
case T_PRIVINFLT|T_USER: /* privileged instruction fault */
sv.sival_ptr = (void *)frame->tf_rip;
KERNEL_PROC_LOCK(p);
trapsignal(p, SIGILL, type & ~T_USER, ILL_PRVOPC, sv);
KERNEL_PROC_UNLOCK(p);
goto out;
case T_FPOPFLT|T_USER: /* coprocessor operand fault */
#ifdef TRAP_SIGDEBUG
printf("pid %d (%s): ILL at rip %lx addr %lx\n",
p->p_pid, p->p_comm, frame->tf_rip, rcr2());
frame_dump(frame);
#endif
sv.sival_ptr = (void *)frame->tf_rip;
KERNEL_PROC_LOCK(p);
trapsignal(p, SIGILL, type & ~T_USER, ILL_COPROC, sv);
KERNEL_PROC_UNLOCK(p);
goto out;
case T_ASTFLT|T_USER: /* Allow process switch */
uvmexp.softs++;
if (p->p_flag & P_OWEUPC) {
KERNEL_PROC_LOCK(p);
ADDUPROF(p);
KERNEL_PROC_UNLOCK(p);
}
/* Allow a forced task switch. */
if (curcpu()->ci_want_resched)
preempt(NULL);
goto out;
case T_BOUND|T_USER:
sv.sival_ptr = (void *)frame->tf_rip;
KERNEL_PROC_LOCK(p);
trapsignal(p, SIGFPE, type &~ T_USER, FPE_FLTSUB, sv);
KERNEL_PROC_UNLOCK(p);
goto out;
case T_OFLOW|T_USER:
sv.sival_ptr = (void *)frame->tf_rip;
KERNEL_PROC_LOCK(p);
trapsignal(p, SIGFPE, type &~ T_USER, FPE_INTOVF, sv);
KERNEL_PROC_UNLOCK(p);
goto out;
case T_DIVIDE|T_USER:
sv.sival_ptr = (void *)frame->tf_rip;
KERNEL_PROC_LOCK(p);
trapsignal(p, SIGFPE, type &~ T_USER, FPE_INTDIV, sv);
KERNEL_PROC_UNLOCK(p);
goto out;
case T_ARITHTRAP|T_USER:
case T_XMM|T_USER:
fputrap(frame);
goto out;
case T_PAGEFLT: /* allow page faults in kernel mode */
if (p == NULL)
goto we_re_toast;
cr2 = rcr2();
KERNEL_LOCK();
goto faultcommon;
case T_PAGEFLT|T_USER: { /* page fault */
vaddr_t va, fa;
struct vmspace *vm;
struct vm_map *map;
vm_prot_t ftype;
extern struct vm_map *kernel_map;
cr2 = rcr2();
KERNEL_PROC_LOCK(p);
faultcommon:
vm = p->p_vmspace;
if (vm == NULL)
goto we_re_toast;
fa = cr2;
va = trunc_page((vaddr_t)cr2);
/*
* It is only a kernel address space fault iff:
* 1. (type & T_USER) == 0 and
* 2. pcb_onfault not set or
* 3. pcb_onfault set but supervisor space fault
* The last can occur during an exec() copyin where the
* argument space is lazy-allocated.
*/
if (type == T_PAGEFLT && va >= VM_MIN_KERNEL_ADDRESS)
map = kernel_map;
else
map = &vm->vm_map;
if (frame->tf_err & PGEX_W)
ftype = VM_PROT_WRITE;
else if (frame->tf_err & PGEX_I)
ftype = VM_PROT_EXECUTE;
else
ftype = VM_PROT_READ;
#ifdef DIAGNOSTIC
if (map == kernel_map && va == 0) {
printf("trap: bad kernel access at %lx\n", va);
goto we_re_toast;
}
#endif
/* Fault the original page in. */
onfault = pcb->pcb_onfault;
pcb->pcb_onfault = NULL;
error = uvm_fault(map, va, frame->tf_err & PGEX_P?
VM_FAULT_PROTECT : VM_FAULT_INVALID, ftype);
pcb->pcb_onfault = onfault;
if (error == 0) {
if (map != kernel_map)
uvm_grow(p, va);
if (type == T_PAGEFLT) {
KERNEL_UNLOCK();
return;
}
KERNEL_PROC_UNLOCK(p);
goto out;
}
if (error == EACCES) {
error = EFAULT;
}
if (type == T_PAGEFLT) {
if (pcb->pcb_onfault != 0) {
KERNEL_UNLOCK();
goto copyfault;
}
printf("uvm_fault(%p, 0x%lx, 0, %d) -> %x\n",
map, va, ftype, error);
goto we_re_toast;
}
if (error == ENOMEM) {
printf("UVM: pid %d (%s), uid %d killed: out of swap\n",
p->p_pid, p->p_comm,
p->p_cred && p->p_ucred ?
(int)p->p_ucred->cr_uid : -1);
sv.sival_ptr = (void *)fa;
trapsignal(p, SIGKILL, T_PAGEFLT, SEGV_MAPERR, sv);
} else {
#ifdef TRAP_SIGDEBUG
printf("pid %d (%s): SEGV at rip %lx addr %lx\n",
p->p_pid, p->p_comm, frame->tf_rip, va);
frame_dump(frame);
#endif
sv.sival_ptr = (void *)fa;
trapsignal(p, SIGSEGV, T_PAGEFLT, SEGV_MAPERR, sv);
}
if (type == T_PAGEFLT)
KERNEL_UNLOCK();
else
KERNEL_PROC_UNLOCK(p);
break;
}
case T_TRCTRAP:
goto we_re_toast;
case T_BPTFLT|T_USER: /* bpt instruction fault */
case T_TRCTRAP|T_USER: /* trace trap */
#ifdef MATH_EMULATE
trace:
#endif
KERNEL_PROC_LOCK(p);
trapsignal(p, SIGTRAP, type &~ T_USER, TRAP_BRKPT, sv);
KERNEL_PROC_UNLOCK(p);
break;
#if NISA > 0
case T_NMI:
#if defined(KGDB) || defined(DDB)
/* NMI can be hooked up to a pushbutton for debugging */
printf ("NMI ... going to debugger\n");
#ifdef KGDB
if (kgdb_trap(type, frame))
return;
#endif
#ifdef DDB
if (kdb_trap(type, 0, frame))
return;
#endif
#endif /* KGDB || DDB */
/* machine/parity/power fail/"kitchen sink" faults */
if (x86_nmi() != 0)
goto we_re_toast;
else
return;
#endif /* NISA > 0 */
}
if ((type & T_USER) == 0)
return;
out:
userret(p);
}
/*
* Process a system call.
*
* System calls are strange beasts. They are passed the syscall number
* in v0, and the arguments in the registers (as normal). They return
* an error flag in a3 (if a3 != 0 on return, the syscall had an error),
* and the return value (if any) in v0.
*
* The assembly stub takes care of moving the call number into a register
* we can get to, and moves all of the argument registers into their places
* in the trap frame. On return, it restores the callee-saved registers,
* a3, and v0 from the frame before returning to the user process.
*/
void
syscall_plain(struct proc *p, u_int64_t code, struct trapframe *framep)
{
const struct sysent *callp;
int error;
u_int64_t rval[2];
u_int64_t *args, copyargs[10]; /* XXX */
u_int hidden, nargs;
KERNEL_PROC_LOCK(p);
uvmexp.syscalls++;
p->p_md.md_tf = framep;
callp = p->p_emul->e_sysent;
switch (code) {
case SYS_syscall:
case SYS___syscall:
/*
* syscall() and __syscall() are handled the same on
* the alpha, as everything is 64-bit aligned, anyway.
*/
code = framep->tf_regs[FRAME_A0];
hidden = 1;
break;
default:
hidden = 0;
break;
}
code &= (SYS_NSYSENT - 1);
callp += code;
nargs = callp->sy_narg + hidden;
switch (nargs) {
default:
error = copyin((caddr_t)alpha_pal_rdusp(), ©args[6],
(nargs - 6) * sizeof(u_int64_t));
if (error)
goto bad;
case 6:
copyargs[5] = framep->tf_regs[FRAME_A5];
case 5:
copyargs[4] = framep->tf_regs[FRAME_A4];
case 4:
copyargs[3] = framep->tf_regs[FRAME_A3];
copyargs[2] = framep->tf_regs[FRAME_A2];
copyargs[1] = framep->tf_regs[FRAME_A1];
copyargs[0] = framep->tf_regs[FRAME_A0];
args = copyargs;
break;
case 3:
case 2:
case 1:
case 0:
args = &framep->tf_regs[FRAME_A0];
break;
}
args += hidden;
#ifdef SYSCALL_DEBUG
scdebug_call(p, code, args);
#endif
rval[0] = 0;
rval[1] = 0;
error = (*callp->sy_call)(p, args, rval);
switch (error) {
case 0:
framep->tf_regs[FRAME_V0] = rval[0];
framep->tf_regs[FRAME_A4] = rval[1];
framep->tf_regs[FRAME_A3] = 0;
break;
case ERESTART:
framep->tf_regs[FRAME_PC] -= 4;
break;
case EJUSTRETURN:
break;
default:
bad:
framep->tf_regs[FRAME_V0] = error;
framep->tf_regs[FRAME_A3] = 1;
break;
}
#ifdef SYSCALL_DEBUG
scdebug_ret(p, code, error, rval);
#endif
KERNEL_PROC_UNLOCK(p);
userret(p);
}