/*******************************************************************************
**
** Function L2CA_GetDisconnectReason
**
** Description This function returns the disconnect reason code.
**
** Returns disconnect reason
**
*******************************************************************************/
UINT16 L2CA_GetDisconnectReason (BD_ADDR remote_bda)
{
tL2C_LCB *p_lcb;
UINT16 reason = 0;
if ((p_lcb = l2cu_find_lcb_by_bd_addr (remote_bda)) != NULL)
reason = p_lcb->disc_reason;
L2CAP_TRACE_DEBUG1 ("L2CA_GetDisconnectReason=%d ",reason);
return reason;
}
/*******************************************************************************
**
** Function L2CA_HandleConnUpdateEvent
**
** Description This function enables the connection update request from remote
** after a successful connection update response is received.
**
** Returns void
**
*******************************************************************************/
void L2CA_HandleConnUpdateEvent (UINT16 handle, UINT8 status)
{
tL2C_LCB *p_lcb;
BD_ADDR rem_bda;
L2CAP_TRACE_DEBUG0("L2CA_HandleConnUpdateEvent");
if(status!=HCI_SUCCESS)//no action to be taken
{
L2CAP_TRACE_WARNING1("L2CA_EnableUpdateBleConnParams: connection update complete event recvd without success, status: %d", status);
return;
}
/* See if we have a link control block for the remote device */
p_lcb = l2cu_find_lcb_by_handle(handle);
if(!p_lcb)
{
L2CAP_TRACE_WARNING1("L2CA_EnableUpdateBleConnParams: Invalid handle: %d", handle);
return;
}
memcpy(rem_bda, p_lcb->remote_bd_addr, BD_ADDR_LEN);
L2CAP_TRACE_DEBUG1("L2CA_HandleConnUpdateEvent: upd_disabled=%d",p_lcb->upd_disabled);
if(p_lcb->upd_disabled == UPD_UPDATED)
L2CA_EnableUpdateBleConnParams (rem_bda, TRUE);
}
/*******************************************************************************
**
** Function l2c_rcv_acl_data
**
** Description This function is called from the HCI Interface when an ACL
** data packet is received.
**
** Returns void
**
*******************************************************************************/
void l2c_rcv_acl_data (BT_HDR *p_msg)
{
UINT8 *p = (UINT8 *)(p_msg + 1) + p_msg->offset;
UINT16 handle, hci_len;
UINT8 pkt_type;
tL2C_LCB *p_lcb;
tL2C_CCB *p_ccb = NULL;
UINT16 l2cap_len, rcv_cid, psm;
/* Extract the handle */
STREAM_TO_UINT16 (handle, p);
pkt_type = HCID_GET_EVENT (handle);
handle = HCID_GET_HANDLE (handle);
/* Since the HCI Transport is putting segmented packets back together, we */
/* should never get a valid packet with the type set to "continuation" */
if (pkt_type != L2CAP_PKT_CONTINUE)
{
/* Find the LCB based on the handle */
if ((p_lcb = l2cu_find_lcb_by_handle (handle)) == NULL)
{
UINT8 cmd_code;
/* There is a slight possibility (specifically with USB) that we get an */
/* L2CAP connection request before we get the HCI connection complete. */
/* So for these types of messages, hold them for up to 2 seconds. */
STREAM_TO_UINT16 (hci_len, p);
STREAM_TO_UINT16 (l2cap_len, p);
STREAM_TO_UINT16 (rcv_cid, p);
STREAM_TO_UINT8 (cmd_code, p);
if ((p_msg->layer_specific == 0) && (rcv_cid == L2CAP_SIGNALLING_CID)
&& (cmd_code == L2CAP_CMD_INFO_REQ || cmd_code == L2CAP_CMD_CONN_REQ))
{
L2CAP_TRACE_WARNING5 ("L2CAP - holding ACL for unknown handle:%d ls:%d cid:%d opcode:%d cur count:%d",
handle, p_msg->layer_specific, rcv_cid, cmd_code,
l2cb.rcv_hold_q.count);
p_msg->layer_specific = 2;
GKI_enqueue (&l2cb.rcv_hold_q, p_msg);
if (l2cb.rcv_hold_q.count == 1)
btu_start_timer (&l2cb.rcv_hold_tle, BTU_TTYPE_L2CAP_HOLD, BT_1SEC_TIMEOUT);
return;
}
else
{
L2CAP_TRACE_ERROR5 ("L2CAP - rcvd ACL for unknown handle:%d ls:%d cid:%d opcode:%d cur count:%d",
handle, p_msg->layer_specific, rcv_cid, cmd_code, l2cb.rcv_hold_q.count);
}
GKI_freebuf (p_msg);
return;
}
}
else
{
L2CAP_TRACE_WARNING1 ("L2CAP - expected pkt start or complete, got: %d", pkt_type);
GKI_freebuf (p_msg);
return;
}
/* Extract the length and update the buffer header */
STREAM_TO_UINT16 (hci_len, p);
p_msg->offset += 4;
#if (L2CAP_HOST_FLOW_CTRL == TRUE)
/* Send ack if we hit the threshold */
if (++p_lcb->link_pkts_unacked >= p_lcb->link_ack_thresh)
btu_hcif_send_host_rdy_for_data();
#endif
/* Extract the length and CID */
STREAM_TO_UINT16 (l2cap_len, p);
STREAM_TO_UINT16 (rcv_cid, p);
/* Find the CCB for this CID */
if (rcv_cid >= L2CAP_BASE_APPL_CID)
{
if ((p_ccb = l2cu_find_ccb_by_cid (p_lcb, rcv_cid)) == NULL)
{
L2CAP_TRACE_WARNING1 ("L2CAP - unknown CID: 0x%04x", rcv_cid);
GKI_freebuf (p_msg);
return;
}
}
if (hci_len >= L2CAP_PKT_OVERHEAD) /* Must receive at least the L2CAP length and CID.*/
{
p_msg->len = hci_len - L2CAP_PKT_OVERHEAD;
p_msg->offset += L2CAP_PKT_OVERHEAD;
}
else
{
L2CAP_TRACE_WARNING0 ("L2CAP - got incorrect hci header" );
GKI_freebuf (p_msg);
return;
}
if (l2cap_len != p_msg->len)
{
L2CAP_TRACE_WARNING2 ("L2CAP - bad length in pkt. Exp: %d Act: %d",
l2cap_len, p_msg->len);
GKI_freebuf (p_msg);
return;
}
/* Send the data through the channel state machine */
if (rcv_cid == L2CAP_SIGNALLING_CID)
{
process_l2cap_cmd (p_lcb, p, l2cap_len);
GKI_freebuf (p_msg);
}
else if (rcv_cid == L2CAP_CONNECTIONLESS_CID)
{
/* process_connectionless_data (p_lcb); */
STREAM_TO_UINT16 (psm, p);
L2CAP_TRACE_DEBUG1( "GOT CONNECTIONLESS DATA PSM:%d", psm ) ;
#if (TCS_BCST_SETUP_INCLUDED == TRUE && TCS_INCLUDED == TRUE)
if (psm == TCS_PSM_INTERCOM || psm == TCS_PSM_CORDLESS)
{
p_msg->offset += L2CAP_BCST_OVERHEAD;
p_msg->len -= L2CAP_BCST_OVERHEAD;
tcs_proc_bcst_msg( p_lcb->remote_bd_addr, p_msg ) ;
GKI_freebuf (p_msg);
}
else
#endif
#if (L2CAP_UCD_INCLUDED == TRUE)
/* if it is not broadcast, check UCD registration */
if ( l2c_ucd_check_rx_pkts( p_lcb, p_msg ) )
{
/* nothing to do */
}
else
#endif
GKI_freebuf (p_msg);
}
#if (BLE_INCLUDED == TRUE)
else if (rcv_cid == L2CAP_BLE_SIGNALLING_CID)
{
l2cble_process_sig_cmd (p_lcb, p, l2cap_len);
GKI_freebuf (p_msg);
}
#endif
#if (L2CAP_NUM_FIXED_CHNLS > 0)
else if ((rcv_cid >= L2CAP_FIRST_FIXED_CHNL) && (rcv_cid <= L2CAP_LAST_FIXED_CHNL) &&
(l2cb.fixed_reg[rcv_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedData_Cb != NULL) )
{
/* If no CCB for this channel, allocate one */
if (l2cu_initialize_fixed_ccb (p_lcb, rcv_cid, &l2cb.fixed_reg[rcv_cid - L2CAP_FIRST_FIXED_CHNL].fixed_chnl_opts))
{
p_ccb = p_lcb->p_fixed_ccbs[rcv_cid - L2CAP_FIRST_FIXED_CHNL];
if (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_BASIC_MODE)
l2c_fcr_proc_pdu (p_ccb, p_msg);
else
(*l2cb.fixed_reg[rcv_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedData_Cb)(p_lcb->remote_bd_addr, p_msg);
}
else
GKI_freebuf (p_msg);
}
#endif
else
{
if (p_ccb == NULL)
GKI_freebuf (p_msg);
else
{
/* Basic mode packets go straight to the state machine */
if (p_ccb->peer_cfg.fcr.mode == L2CAP_FCR_BASIC_MODE)
l2c_csm_execute (p_ccb, L2CEVT_L2CAP_DATA, p_msg);
else
{
/* eRTM or streaming mode, so we need to validate states first */
if ((p_ccb->chnl_state == CST_OPEN) || (p_ccb->chnl_state == CST_CONFIG))
l2c_fcr_proc_pdu (p_ccb, p_msg);
else
GKI_freebuf (p_msg);
}
}
}
}