/*
LED indication for normal connection completion.
*/
VOID LEDConnectionCompletion(RTMP_ADAPTER *pAd, BOOLEAN bSuccess)
{
/* LED indication. */
/*if (pAd->StaCfg.WscControl.bWPSSession == FALSE) */
if (pAd->StaCfg.WscControl.WscConfMode == WSC_DISABLE)
{
if (LED_MODE(pAd) == WPS_LED_MODE_9) /* LED mode 9. */
{
UCHAR WPSLEDStatus = 0;
if (bSuccess == TRUE) /* Successful connenction. */
{
/* The AP uses OPEN-NONE. */
if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeOpen) && (pAd->StaCfg.WepStatus == Ndis802_11WEPDisabled))
WPSLEDStatus = LED_NORMAL_CONNECTION_WITHOUT_SECURITY;
else /* The AP uses an encryption algorithm. */
WPSLEDStatus = LED_NORMAL_CONNECTION_WITH_SECURITY;
}
else /* Connection failure. */
WPSLEDStatus = LED_WPS_TURN_LED_OFF;
RTMPSetLED(pAd, WPSLEDStatus);
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("%s: %d\n", __FUNCTION__, WPSLEDStatus));
}
}
}
/*
LED indication for normal connection start.
*/
VOID LEDConnectionStart(RTMP_ADAPTER *pAd)
{
/* LED indication. */
/*if (pAd->StaCfg.WscControl.bWPSSession == FALSE) */
/*if (pAd->StaCfg.WscControl.WscConfMode != WSC_DISABLE && pAd->StaCfg.WscControl.bWscTrigger) */
if (pAd->StaCfg.WscControl.WscConfMode == WSC_DISABLE)
{
if (LED_MODE(pAd) == WPS_LED_MODE_9) /* LED mode 9. */
{
UCHAR WPSLEDStatus = 0;
/* The AP uses OPEN-NONE. */
if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeOpen)
&& (pAd->StaCfg.WepStatus == Ndis802_11WEPDisabled))
WPSLEDStatus = LED_WPS_TURN_LED_OFF;
else /* The AP uses an encryption algorithm. */
WPSLEDStatus = LED_WPS_IN_PROCESS;
RTMPSetLED(pAd, WPSLEDStatus);
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("%s: %d\n", __FUNCTION__, WPSLEDStatus));
}
}
}
/*
========================================================================
Routine Description:
Set LED Status
Arguments:
pAd Pointer to our adapter
Status LED Status
Return Value:
None
IRQL = PASSIVE_LEVEL
IRQL = DISPATCH_LEVEL
Note:
========================================================================
*/
VOID RTMPSetLEDStatus(RTMP_ADAPTER *pAd, UCHAR Status)
{
/*ULONG data; */
UCHAR LinkStatus = 0;
UCHAR LedMode;
UCHAR MCUCmd = 0;
BOOLEAN bIgnored = FALSE;
#ifdef MT7628
INT LED_CMD = -1;
#endif /*MT7628*/
#ifdef WSC_INCLUDED
#ifdef WSC_LED_SUPPORT
PWSC_CTRL pWscControl = NULL;
#ifdef CONFIG_AP_SUPPORT
pWscControl = &pAd->ApCfg.MBSSID[MAIN_MBSSID].WscControl;
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
pWscControl = &pAd->StaCfg.WscControl;
#endif /* CONFIG_STA_SUPPORT */
#endif /* WSC_LED_SUPPORT */
#endif /* WSC_INCLUDED */
#ifdef CONFIG_ATE
/*
In ATE mode of RT2860 AP/STA, we have erased 8051 firmware.
So LED mode is not supported when ATE is running.
*/
if (!IS_RT3572(pAd))
{
if (ATE_ON(pAd))
return;
}
#endif /* CONFIG_ATE */
LedMode = 1;//LED_MODE(pAd);
#ifdef MT7628
if (IS_MT7603(pAd) || IS_MT7628(pAd))
{
if (LedMode < 0 || Status <0 || LedMode > 15 || Status > 11)
return;
else
LED_CMD = LED_Array[LedMode][Status];
}
#endif /*MT7628*/
switch (Status)
{
case LED_LINK_DOWN:
LinkStatus = LINK_STATUS_LINK_DOWN;
pAd->LedCntl.LedIndicatorStrength = 0;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_LINK_UP:
if (pAd->CommonCfg.Channel > 14)
LinkStatus = LINK_STATUS_ABAND_LINK_UP;
else
LinkStatus = LINK_STATUS_GBAND_LINK_UP;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_RADIO_ON:
LinkStatus = LINK_STATUS_RADIO_ON;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_HALT:
LedMode = 0; /* Driver sets MAC register and MAC controls LED */
case LED_RADIO_OFF:
LinkStatus = LINK_STATUS_RADIO_OFF;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_WPS:
LinkStatus = LINK_STATUS_WPS;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_ON_SITE_SURVEY:
LinkStatus = LINK_STATUS_ON_SITE_SURVEY;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_POWER_UP:
LinkStatus = LINK_STATUS_POWER_UP;
MCUCmd = MCU_SET_LED_MODE;
break;
#ifdef CONFIG_ATE
#endif /* CONFIG_ATE */
#ifdef WSC_INCLUDED
#ifdef WSC_LED_SUPPORT
case LED_WPS_IN_PROCESS:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_WPS_IN_PROCESS;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_IN_PROCESS;
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("%s: LED_WPS_IN_PROCESS\n", __FUNCTION__));
}
else
bIgnored = TRUE;
break;
case LED_WPS_ERROR:
if (WscSupportWPSLEDMode(pAd))
{
/* In the case of LED mode 9, the error LED should be turned on only after WPS walk time expiration. */
if ((pWscControl->bWPSWalkTimeExpiration == FALSE) &&
(LED_MODE(pAd) == WPS_LED_MODE_9))
{
/* do nothing. */
}
else
{
LinkStatus = LINK_STATUS_WPS_ERROR;
MCUCmd = MCU_SET_WPS_LED_MODE;
}
pWscControl->WscLEDMode = LED_WPS_ERROR;
pWscControl->WscLastWarningLEDMode = LED_WPS_ERROR;
}
else
bIgnored = TRUE;
break;
case LED_WPS_SESSION_OVERLAP_DETECTED:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_WPS_SESSION_OVERLAP_DETECTED;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SESSION_OVERLAP_DETECTED;
pWscControl->WscLastWarningLEDMode = LED_WPS_SESSION_OVERLAP_DETECTED;
}
else
bIgnored = TRUE;
break;
case LED_WPS_SUCCESS:
if (WscSupportWPSLEDMode(pAd))
{
if ((LED_MODE(pAd) == WPS_LED_MODE_7) ||
(LED_MODE(pAd) == WPS_LED_MODE_11) ||
(LED_MODE(pAd) == WPS_LED_MODE_12)
)
{
/* In the WPS LED mode 7, 11 and 12, the blue LED would last 300 seconds regardless of the AP's security settings. */
LinkStatus = LINK_STATUS_WPS_SUCCESS_WITH_SECURITY;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
/* Turn off the WPS successful LED pattern after 300 seconds. */
RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
}
else if (LED_MODE(pAd) == WPS_LED_MODE_8) /* The WPS LED mode 8 */
{
if (WscAPHasSecuritySetting(pAd, pWscControl)) /* The WPS AP has the security setting. */
{
LinkStatus = LINK_STATUS_WPS_SUCCESS_WITH_SECURITY;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
/* Turn off the WPS successful LED pattern after 300 seconds. */
RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
}
else /* The WPS AP does not have the secuirty setting. */
{
LinkStatus = LINK_STATUS_WPS_SUCCESS_WITHOUT_SECURITY;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
/* Turn off the WPS successful LED pattern after 300 seconds. */
RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
}
}
else if (LED_MODE(pAd) == WPS_LED_MODE_9) /* The WPS LED mode 9. */
{
/* Always turn on the WPS blue LED for 300 seconds. */
LinkStatus = LINK_STATUS_WPS_BLUE_LED;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
/* Turn off the WPS successful LED pattern after 300 seconds. */
RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
}
else
{
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("%s: LED_WPS_SUCCESS (Incorrect LED mode = %d)\n",
__FUNCTION__, LED_MODE(pAd)));
ASSERT(FALSE);
}
}
else
bIgnored = TRUE;
break;
case LED_WPS_TURN_LED_OFF:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_WPS_TURN_LED_OFF;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_TURN_LED_OFF;
}
else
bIgnored = TRUE;
break;
case LED_WPS_TURN_ON_BLUE_LED:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_WPS_BLUE_LED;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
}
else
bIgnored = TRUE;
break;
case LED_NORMAL_CONNECTION_WITHOUT_SECURITY:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_NORMAL_CONNECTION_WITHOUT_SECURITY;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
}
else
bIgnored = TRUE;
break;
case LED_NORMAL_CONNECTION_WITH_SECURITY:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_NORMAL_CONNECTION_WITH_SECURITY;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
}
else
bIgnored = TRUE;
break;
/*WPS LED Mode 10 */
case LED_WPS_MODE10_TURN_ON:
if(WscSupportWPSLEDMode10(pAd))
{
LinkStatus = LINK_STATUS_WPS_MODE10_TURN_ON;
MCUCmd = MCU_SET_WPS_LED_MODE;
}
else
bIgnored = TRUE;
break;
case LED_WPS_MODE10_FLASH:
if(WscSupportWPSLEDMode10(pAd))
{
LinkStatus = LINK_STATUS_WPS_MODE10_FLASH;
MCUCmd = MCU_SET_WPS_LED_MODE;
}
else
bIgnored = TRUE;
break;
case LED_WPS_MODE10_TURN_OFF:
if(WscSupportWPSLEDMode10(pAd))
{
LinkStatus = LINK_STATUS_WPS_MODE10_TURN_OFF;
MCUCmd = MCU_SET_WPS_LED_MODE;;
}
else
bIgnored = TRUE;
break;
#endif /* WSC_LED_SUPPORT */
#endif /* WSC_INCLUDED */
default:
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_WARN, ("RTMPSetLED::Unknown Status 0x%x\n", Status));
break;
}
#ifdef MT7628
if (IS_MT7628(pAd))
{
AndesLedEnhanceOP(pAd, 0, 0, 0, LED_CMD);
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("%s: LED_CMD:0x%x, LED Mode:0x%x, LinkStatus:0x%x\n", __FUNCTION__, LED_CMD, LedMode, LinkStatus));
} else
#endif /*MT7628*/
if (MCUCmd)
{
AsicSendCommandToMcu(pAd, MCUCmd, 0xff, LedMode, LinkStatus, FALSE);
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("%s: MCUCmd:0x%x, LED Mode:0x%x, LinkStatus:0x%x\n", __FUNCTION__, MCUCmd, LedMode, LinkStatus));
}
/*
Keep LED status for LED SiteSurvey mode.
After SiteSurvey, we will set the LED mode to previous status.
*/
if ((Status != LED_ON_SITE_SURVEY) && (Status != LED_POWER_UP) && (bIgnored == FALSE))
pAd->LedCntl.LedStatus = Status;
}
/*
========================================================================
Routine Description:
Set LED Status
Arguments:
pAd Pointer to our adapter
Status LED Status
Return Value:
None
IRQL = PASSIVE_LEVEL
IRQL = DISPATCH_LEVEL
Note:
========================================================================
*/
VOID RTMPSetLEDStatus(
IN PRTMP_ADAPTER pAd,
IN UCHAR Status)
{
/*ULONG data; */
UCHAR LinkStatus = 0;
UCHAR LedMode;
UCHAR MCUCmd = 0;
BOOLEAN bIgnored = FALSE;
#ifdef WSC_INCLUDED
#ifdef WSC_LED_SUPPORT
PWSC_CTRL pWscControl = NULL;
#ifdef CONFIG_AP_SUPPORT
pWscControl = &pAd->ApCfg.MBSSID[MAIN_MBSSID].WscControl;
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
pWscControl = &pAd->StaCfg.WscControl;
#endif /* CONFIG_STA_SUPPORT */
#endif /* WSC_LED_SUPPORT */
#endif /* WSC_INCLUDED */
#ifdef RALINK_ATE
/*
In ATE mode of RT2860 AP/STA, we have erased 8051 firmware.
So LED mode is not supported when ATE is running.
*/
if (!IS_RT3572(pAd))
{
if (ATE_ON(pAd))
return;
}
#endif /* RALINK_ATE */
LedMode = LED_MODE(pAd);
switch (Status)
{
case LED_LINK_DOWN:
LinkStatus = LINK_STATUS_LINK_DOWN;
pAd->LedCntl.LedIndicatorStrength = 0;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_LINK_UP:
if (pAd->CommonCfg.Channel > 14)
LinkStatus = LINK_STATUS_ABAND_LINK_UP;
else
LinkStatus = LINK_STATUS_GBAND_LINK_UP;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_RADIO_ON:
LinkStatus = LINK_STATUS_RADIO_ON;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_HALT:
LedMode = 0; /* Driver sets MAC register and MAC controls LED */
case LED_RADIO_OFF:
LinkStatus = LINK_STATUS_RADIO_OFF;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_WPS:
LinkStatus = LINK_STATUS_WPS;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_ON_SITE_SURVEY:
LinkStatus = LINK_STATUS_ON_SITE_SURVEY;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_POWER_UP:
LinkStatus = LINK_STATUS_POWER_UP;
MCUCmd = MCU_SET_LED_MODE;
break;
#ifdef RALINK_ATE
#endif /* RALINK_ATE */
#ifdef WSC_INCLUDED
#ifdef WSC_LED_SUPPORT
#ifdef CONFIG_WIFI_LED_SHARE
case LED_WPS_PRE_STAGE:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_WPS_PRE_STAGE;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_PRE_STAGE;
}
else
bIgnored = TRUE;
break;
case LED_WPS_POST_STAGE:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_WPS_PRE_STAGE;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_POST_STAGE;
}
else
bIgnored = TRUE;
break;
#endif /* CONFIG_WIFI_LED_SHARE */
case LED_WPS_IN_PROCESS:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_WPS_IN_PROCESS;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_IN_PROCESS;
DBGPRINT(RT_DEBUG_TRACE, ("%s: LED_WPS_IN_PROCESS\n", __FUNCTION__));
}
else
bIgnored = TRUE;
break;
case LED_WPS_ERROR:
if (WscSupportWPSLEDMode(pAd))
{
/* In the case of LED mode 9, the error LED should be turned on only after WPS walk time expiration. */
if ((pWscControl->bWPSWalkTimeExpiration == FALSE) &&
(LED_MODE(pAd) == WPS_LED_MODE_9))
{
/* do nothing. */
}
else
{
LinkStatus = LINK_STATUS_WPS_ERROR;
MCUCmd = MCU_SET_WPS_LED_MODE;
}
pWscControl->WscLEDMode = LED_WPS_ERROR;
pWscControl->WscLastWarningLEDMode = LED_WPS_ERROR;
}
else
bIgnored = TRUE;
break;
case LED_WPS_SESSION_OVERLAP_DETECTED:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_WPS_SESSION_OVERLAP_DETECTED;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SESSION_OVERLAP_DETECTED;
pWscControl->WscLastWarningLEDMode = LED_WPS_SESSION_OVERLAP_DETECTED;
}
else
bIgnored = TRUE;
break;
case LED_WPS_SUCCESS:
if (WscSupportWPSLEDMode(pAd))
{
if ((LED_MODE(pAd) == WPS_LED_MODE_7) ||
(LED_MODE(pAd) == WPS_LED_MODE_11) ||
(LED_MODE(pAd) == WPS_LED_MODE_12)
#ifdef CONFIG_WIFI_LED_SHARE
||(LED_MODE(pAd) == WPS_LED_MODE_SHARE)
#endif /* CONFIG_WIFI_LED_SHARE */
)
{
/* In the WPS LED mode 7, 11 and 12, the blue LED would last 300 seconds regardless of the AP's security settings. */
LinkStatus = LINK_STATUS_WPS_SUCCESS_WITH_SECURITY;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
/* Turn off the WPS successful LED pattern after 300 seconds. */
RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
}
else if (LED_MODE(pAd) == WPS_LED_MODE_8) /* The WPS LED mode 8 */
{
if (WscAPHasSecuritySetting(pAd, pWscControl)) /* The WPS AP has the security setting. */
{
LinkStatus = LINK_STATUS_WPS_SUCCESS_WITH_SECURITY;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
/* Turn off the WPS successful LED pattern after 300 seconds. */
RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
}
else /* The WPS AP does not have the secuirty setting. */
{
LinkStatus = LINK_STATUS_WPS_SUCCESS_WITHOUT_SECURITY;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
/* Turn off the WPS successful LED pattern after 300 seconds. */
RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
}
}
else if (LED_MODE(pAd) == WPS_LED_MODE_9) /* The WPS LED mode 9. */
{
/* Always turn on the WPS blue LED for 300 seconds. */
LinkStatus = LINK_STATUS_WPS_BLUE_LED;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
/* Turn off the WPS successful LED pattern after 300 seconds. */
RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
}
else
{
DBGPRINT(RT_DEBUG_TRACE, ("%s: LED_WPS_SUCCESS (Incorrect LED mode = %d)\n",
__FUNCTION__, LED_MODE(pAd)));
ASSERT(FALSE);
}
}
else
bIgnored = TRUE;
break;
case LED_WPS_TURN_LED_OFF:
if (WscSupportWPSLEDMode(pAd))
{
#ifdef CONFIG_WIFI_LED_SHARE
USHORT value;
RT28xx_EEPROM_READ16(pAd, EEPROM_FREQ_OFFSET, value);
pAd->LedCntl.MCULedCntl.word = (value >> 8);
#endif /* CONFIG_WIFI_LED_SHARE */
LinkStatus = LINK_STATUS_WPS_TURN_LED_OFF;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_TURN_LED_OFF;
}
else
bIgnored = TRUE;
break;
case LED_WPS_TURN_ON_BLUE_LED:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_WPS_BLUE_LED;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
}
else
bIgnored = TRUE;
break;
case LED_NORMAL_CONNECTION_WITHOUT_SECURITY:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_NORMAL_CONNECTION_WITHOUT_SECURITY;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
}
else
bIgnored = TRUE;
break;
case LED_NORMAL_CONNECTION_WITH_SECURITY:
if (WscSupportWPSLEDMode(pAd))
{
LinkStatus = LINK_STATUS_NORMAL_CONNECTION_WITH_SECURITY;
MCUCmd = MCU_SET_WPS_LED_MODE;
pWscControl->WscLEDMode = LED_WPS_SUCCESS;
}
else
bIgnored = TRUE;
break;
/*WPS LED Mode 10 */
case LED_WPS_MODE10_TURN_ON:
if(WscSupportWPSLEDMode10(pAd))
{
LinkStatus = LINK_STATUS_WPS_MODE10_TURN_ON;
MCUCmd = MCU_SET_WPS_LED_MODE;
}
else
bIgnored = TRUE;
break;
case LED_WPS_MODE10_FLASH:
if(WscSupportWPSLEDMode10(pAd))
{
LinkStatus = LINK_STATUS_WPS_MODE10_FLASH;
MCUCmd = MCU_SET_WPS_LED_MODE;
}
else
bIgnored = TRUE;
break;
case LED_WPS_MODE10_TURN_OFF:
if(WscSupportWPSLEDMode10(pAd))
{
LinkStatus = LINK_STATUS_WPS_MODE10_TURN_OFF;
MCUCmd = MCU_SET_WPS_LED_MODE;;
}
else
bIgnored = TRUE;
break;
#endif /* WSC_LED_SUPPORT */
#endif /* WSC_INCLUDED */
default:
DBGPRINT(RT_DEBUG_WARN, ("RTMPSetLED::Unknown Status 0x%x\n", Status));
break;
}
/*
========================================================================
Routine Description:
Set LED Status
Arguments:
pAd Pointer to our adapter
Status LED Status
Return Value:
None
IRQL = PASSIVE_LEVEL
IRQL = DISPATCH_LEVEL
Note:
========================================================================
*/
VOID RTMPSetLEDStatus(
IN PRTMP_ADAPTER pAd,
IN UCHAR Status)
{
/*ULONG data; */
UCHAR LinkStatus = 0;
UCHAR LedMode;
UCHAR MCUCmd = 0;
BOOLEAN bIgnored = FALSE;
#ifdef RALINK_ATE
/*
In ATE mode of RT2860 AP/STA, we have erased 8051 firmware.
So LED mode is not supported when ATE is running.
*/
if (!IS_RT3572(pAd))
{
if (ATE_ON(pAd))
return;
}
#endif /* RALINK_ATE */
LedMode = LED_MODE(pAd);
switch (Status)
{
case LED_LINK_DOWN:
LinkStatus = LINK_STATUS_LINK_DOWN;
pAd->LedCntl.LedIndicatorStrength = 0;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_LINK_UP:
if (pAd->CommonCfg.Channel > 14)
LinkStatus = LINK_STATUS_ABAND_LINK_UP;
else
LinkStatus = LINK_STATUS_GBAND_LINK_UP;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_RADIO_ON:
LinkStatus = LINK_STATUS_RADIO_ON;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_HALT:
LedMode = 0; /* Driver sets MAC register and MAC controls LED */
case LED_RADIO_OFF:
LinkStatus = LINK_STATUS_RADIO_OFF;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_WPS:
LinkStatus = LINK_STATUS_WPS;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_ON_SITE_SURVEY:
LinkStatus = LINK_STATUS_ON_SITE_SURVEY;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_POWER_UP:
LinkStatus = LINK_STATUS_POWER_UP;
MCUCmd = MCU_SET_LED_MODE;
break;
#ifdef RALINK_ATE
#endif /* RALINK_ATE */
default:
DBGPRINT(RT_DEBUG_WARN, ("RTMPSetLED::Unknown Status 0x%x\n", Status));
break;
}
if (MCUCmd)
{
AsicSendCommandToMcu(pAd, MCUCmd, 0xff, LedMode, LinkStatus);
DBGPRINT(RT_DEBUG_TRACE, ("%s: MCUCmd:0x%x, LED Mode:0x%x, LinkStatus:0x%x\n", __FUNCTION__, MCUCmd, LedMode, LinkStatus));
}
/* */
/* Keep LED status for LED SiteSurvey mode. */
/* After SiteSurvey, we will set the LED mode to previous status. */
/* */
if ((Status != LED_ON_SITE_SURVEY) && (Status != LED_POWER_UP) && (bIgnored == FALSE))
pAd->LedCntl.LedStatus = Status;
}
/*
========================================================================
Routine Description:
Set LED Status
Arguments:
pAd Pointer to our adapter
Status LED Status
Return Value:
None
IRQL = PASSIVE_LEVEL
IRQL = DISPATCH_LEVEL
Note:
========================================================================
*/
VOID RTMPSetLEDStatus(
IN PRTMP_ADAPTER pAd,
IN UCHAR Status)
{
/*ULONG data; */
UCHAR LinkStatus = 0;
UCHAR LedMode;
UCHAR MCUCmd = 0;
unsigned char bIgnored = FALSE;
INT LED_CMD = -1;
#ifdef RALINK_ATE
/*
In ATE mode of RT2860 AP/STA, we have erased 8051 firmware.
So LED mode is not supported when ATE is running.
*/
if (!IS_RT3572(pAd))
{
if (ATE_ON(pAd))
return;
}
#endif /* RALINK_ATE */
#ifdef RTMP_MAC_USB
#ifdef STATS_COUNT_SUPPORT
if(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF))
return;
#endif /* STATS_COUNT_SUPPORT */
#endif /* RTMP_MAC_USB */
LedMode = LED_MODE(pAd);
if (IS_MT76x0(pAd)) {
if (LedMode < 0 || Status < 0 || LedMode > 15 || Status > 11)
return;
LED_CMD = LED_Array[LedMode][Status];
}
switch (Status)
{
case LED_LINK_DOWN:
LinkStatus = LINK_STATUS_LINK_DOWN;
pAd->LedCntl.LedIndicatorStrength = 0;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_LINK_UP:
if (pAd->CommonCfg.Channel > 14)
LinkStatus = LINK_STATUS_ABAND_LINK_UP;
else
LinkStatus = LINK_STATUS_GBAND_LINK_UP;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_RADIO_ON:
LinkStatus = LINK_STATUS_RADIO_ON;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_HALT:
LedMode = 0; /* Driver sets MAC register and MAC controls LED */
case LED_RADIO_OFF:
LinkStatus = LINK_STATUS_RADIO_OFF;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_WPS:
LinkStatus = LINK_STATUS_WPS;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_ON_SITE_SURVEY:
LinkStatus = LINK_STATUS_ON_SITE_SURVEY;
MCUCmd = MCU_SET_LED_MODE;
break;
case LED_POWER_UP:
LinkStatus = LINK_STATUS_POWER_UP;
MCUCmd = MCU_SET_LED_MODE;
break;
#ifdef RALINK_ATE
#endif /* RALINK_ATE */
default:
DBGPRINT(RT_DEBUG_WARN, ("RTMPSetLED::Unknown Status 0x%x\n", Status));
break;
}
if (IS_MT76x0(pAd)) {
if (LED_CMD != -1)
andes_led_op(pAd, 0, LED_CMD);
} else {
if (MCUCmd)
AsicSendCommandToMcu(pAd, MCUCmd, 0xff, LedMode, LinkStatus, FALSE);
}
DBGPRINT(RT_DEBUG_TRACE, ("%s: MCUCmd:0x%x, LED Mode:0x%x, LinkStatus:0x%x\n", __FUNCTION__, MCUCmd, LedMode, LinkStatus));
/* */
/* Keep LED status for LED SiteSurvey mode. */
/* After SiteSurvey, we will set the LED mode to previous status. */
/* */
if ((Status != LED_ON_SITE_SURVEY) && (Status != LED_POWER_UP) && (bIgnored == FALSE))
pAd->LedCntl.LedStatus = Status;
}