/**
* @brief Display sensors information on LEDs and LCD
* @param status TSL user status
* @retval None
*/
void Process_Sensors(tsl_user_status_t status)
{
#if USE_LCD > 0
uint8_t TheLine[20];
uint8_t str_value[6]; /* sign + 4 digits + empty char */
#endif
#if USE_LCD > 0
/* Display TS1 sensor information */
LcdValue2String(str_value, MyTKeys[0].p_ChD->Delta);
LcdMakeLine(TheLine, (uint8_t *)("TS1"), LcdState2String(MyTKeys[0].p_Data->StateId), str_value);
BSP_LCD_DisplayStringAtLine(7, TheLine);
/* Display TS2 sensor information */
LcdValue2String(str_value, MyTKeys[1].p_ChD->Delta);
LcdMakeLine(TheLine, (uint8_t *)("TS2"), LcdState2String(MyTKeys[1].p_Data->StateId), str_value);
BSP_LCD_DisplayStringAtLine(8, TheLine);
BSP_LCD_SetTextColor(LCD_COLOR_DARKBLUE);
#endif
/* LED1 is ON when TS1 on board is touched */
if (MyTKeys[0].p_Data->StateId == TSL_STATEID_DETECT)
{
BSP_LED_On(LED2);
}
else
{
BSP_LED_Off(LED2);
}
/* LED2 is ON when TS2 on board is touched */
if (MyTKeys[1].p_Data->StateId == TSL_STATEID_DETECT)
{
BSP_LED_On(LED1);
}
else
{
BSP_LED_Off(LED1);
}
/* ECS information */
switch (status)
{
case TSL_USER_STATUS_OK_ECS_OFF:
BSP_LED_Off(LED4);
#if USE_LCD > 0
BSP_LCD_DisplayStringAtLine(4, (uint8_t *)("ECS OFF"));
#endif
break;
case TSL_USER_STATUS_OK_ECS_ON:
BSP_LED_Toggle(LED4);
#if USE_LCD > 0
BSP_LCD_SetTextColor(LCD_COLOR_GREEN);
BSP_LCD_DisplayStringAtLine(4, (uint8_t *)("ECS ON "));
BSP_LCD_SetTextColor(LCD_COLOR_DARKBLUE);
#endif
break;
default:
break;
}
}
/**
* @brief Display sensors information on LEDs and LCD
* @param status TSL user status
* @retval None
*/
void Process_Sensors(tsl_user_status_t status)
{
#if USE_LCD > 0
uint8_t TheLine[20];
uint8_t str_value[6]; /* sign + 4 digits + empty char */
#endif
#if USE_LCD > 0
/* Display state and position */
LcdValue2String(str_value, MyLinRots[0].p_Data->Position);
LcdMakeLine(TheLine, (uint8_t *)("S1 "), LcdState2String(MyLinRots[0].p_Data->StateId), str_value);
BSP_LCD_DisplayStringAtLine(6, TheLine);
BSP_LCD_SetTextColor(LCD_COLOR_DARKBLUE);
/* Display channel's delta values */
LcdValue2String(str_value, MyLinRots[0].p_ChD[0].Delta);
LcdMakeLine(TheLine, (uint8_t *)("CH0"), (uint8_t *)("DELTA "), str_value);
BSP_LCD_DisplayStringAtLine(7, TheLine);
LcdValue2String(str_value, MyLinRots[0].p_ChD[1].Delta);
LcdMakeLine(TheLine, (uint8_t *)("CH1"), (uint8_t *)("DELTA "), str_value);
BSP_LCD_DisplayStringAtLine(8, TheLine);
LcdValue2String(str_value, MyLinRots[0].p_ChD[2].Delta);
LcdMakeLine(TheLine, (uint8_t *)("CH2"), (uint8_t *)("DELTA "), str_value);
BSP_LCD_DisplayStringAtLine(9, TheLine);
#endif
/* LEDs follow the linear position */
BSP_LED_Off(LED1);
BSP_LED_Off(LED2);
BSP_LED_Off(LED3);
if (MyLinRots[0].p_Data->StateId == TSL_STATEID_DETECT)
{
/* The resolution is set to 4 bits (see TSLPRM_LINROT_RESOLUTION parameter in tsl_conf_stm32f3xx.h) */
if (MyLinRots[0].p_Data->Position >= 2)
{
BSP_LED_On(LED3);
}
if (MyLinRots[0].p_Data->Position >= 7)
{
BSP_LED_On(LED2);
}
if (MyLinRots[0].p_Data->Position >= 12)
{
BSP_LED_On(LED1);
}
}
/* ECS information */
switch (status)
{
case TSL_USER_STATUS_OK_ECS_OFF:
BSP_LED_Off(LED4);
#if USE_LCD > 0
BSP_LCD_DisplayStringAtLine(4, (uint8_t *)("ECS OFF"));
#endif
break;
case TSL_USER_STATUS_OK_ECS_ON:
BSP_LED_Toggle(LED4);
#if USE_LCD > 0
BSP_LCD_SetTextColor(LCD_COLOR_GREEN);
BSP_LCD_DisplayStringAtLine(4, (uint8_t *)("ECS ON "));
BSP_LCD_SetTextColor(LCD_COLOR_DARKBLUE);
#endif
break;
default:
break;
}
}
