/*++
Routine Description:
SMI handler to restore ACPI mode
Arguments:
DispatchHandle - The handle of this callback, obtained when registering
DispatchContext - Pointer to the EFI_SMM_SW_DISPATCH_CONTEXT
Returns:
None.
--*/
EFI_STATUS
EFIAPI
AmdSmiBeforePciS3RestoreCallback (
IN EFI_HANDLE DispatchHandle,
IN FCH_SMM_SW_REGISTER_CONTEXT *DispatchContext
)
{
FCH_DATA_BLOCK *pFchPolicy;
EFI_STATUS Status;
UINT8 Index;
UINT8 *pData;
Status = EFI_SUCCESS;
// Restore entire FCH PCI IRQ routing space (C00/C01)
pData = mFchPciIrqRoutingTable;
Index = 0xFF;
do {
Index++;
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC00, &Index, NULL);
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC01, pData++, NULL);
} while (Index != 0xFF);
pFchPolicy = &gFchInitInSmm.FchPolicy;
FchInitS3EarlyRestore (pFchPolicy);
return Status;
}
/**
* FchInitEnv - Config Fch before PCI emulation
*
*
*
* @param[in] EnvParams
*
*/
AGESA_STATUS
FchInitEnv (
IN AMD_ENV_PARAMS *EnvParams
)
{
UINT8 i;
UINT8 Data;
FCH_DATA_BLOCK *FchParams;
AGESA_STATUS Status;
IDS_HDT_CONSOLE (FCH_TRACE, " FchInitEnv Enter... \n");
FchParams = FchInitEnvCreatePrivateData (EnvParams);
// Override internal data with IDS (Optional, internal build only)
IDS_OPTION_CALLOUT (IDS_CALLOUT_FCH_INIT_ENV, FchParams, FchParams->StdHeader);
//
//to_do-Initialize PCI IRQ routing registers for INTA#-INTH#
//
for (i = 0; i < 8; i++) {
Data = i | BIT7; // Select IRQ routing to APIC
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC00, &Data, &EnvParams->StdHeader);
Data = i | BIT4;
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC01, &Data, &EnvParams->StdHeader);
}
AgesaFchOemCallout (FchParams);
Status = FchTaskLauncher (&FchInitEnvTaskTable[0], FchParams);
IDS_HDT_CONSOLE (FCH_TRACE, " FchInitEnv Exit... Status = [0x%x]\n", Status);
return Status;
}
/**
* FchInitLateHwAcpi - Prepare HwAcpi controller to boot to OS.
*
* @param[in] FchDataPtr Fch configuration structure pointer.
*
*/
VOID
FchInitLateHwAcpi (
IN VOID *FchDataPtr
)
{
FCH_DATA_BLOCK *LocalCfgPtr;
AMD_CONFIG_PARAMS *StdHeader;
UINT8 i;
LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
StdHeader = LocalCfgPtr->StdHeader;
GcpuRelatedSetting (LocalCfgPtr);
// Mt C1E Enable
MtC1eEnable (LocalCfgPtr);
if (LocalCfgPtr->Gpp.SerialDebugBusEnable == TRUE ) {
RwMem (ACPI_MMIO_BASE + SERIAL_DEBUG_BASE + FCH_SDB_REG00, AccessWidth8, 0xFF, 0x05);
}
StressResetModeLate (LocalCfgPtr);
SbSleepTrapControl (FALSE);
for (i = 0; i < NUM_OF_DEVICE_FOR_APICIRQ; i++) {
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC00, &FchInternalDeviceIrqForApicMode[i].PciIrqIndex, StdHeader);
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC01, &FchInternalDeviceIrqForApicMode[i].PciIrqData, StdHeader);
}
}
/**
* Clear EnableCf8ExtCfg on all socket
*
* Clear F3x8C bit 14 EnableCf8ExtCfg
*
* @param[in] StdHeader Config handle for library and services
*
*
*/
VOID
DisableCf8ExtCfg (
IN AMD_CONFIG_PARAMS *StdHeader
)
{
AGESA_STATUS AgesaStatus;
PCI_ADDR PciAddress;
UINT32 Socket;
UINT32 Module;
UINT32 PciData;
UINT32 LegacyPciAccess;
ASSERT (IsBsp (StdHeader, &AgesaStatus));
for (Socket = 0; Socket < GetPlatformNumberOfSockets (); Socket++) {
for (Module = 0; Module < GetPlatformNumberOfModules (); Module++) {
if (GetPciAddress (StdHeader, Socket, Module, &PciAddress, &AgesaStatus)) {
PciAddress.Address.Function = FUNC_3;
PciAddress.Address.Register = NB_CFG_HIGH_REG;
LegacyPciAccess = ((1 << 31) + (PciAddress.Address.Register & 0xFC) + (PciAddress.Address.Function << 8) + (PciAddress.Address.Device << 11) + (PciAddress.Address.Bus << 16) + ((PciAddress.Address.Register & 0xF00) << (24 - 8)));
// read from PCI register
LibAmdIoWrite (AccessWidth32, IOCF8, &LegacyPciAccess, StdHeader);
LibAmdIoRead (AccessWidth32, IOCFC, &PciData, StdHeader);
// Disable Cf8ExtCfg
PciData &= 0xFFFFBFFF;
// write to PCI register
LibAmdIoWrite (AccessWidth32, IOCF8, &LegacyPciAccess, StdHeader);
LibAmdIoWrite (AccessWidth32, IOCFC, &PciData, StdHeader);
}
}
}
}
/**
* sataSetIrqIntResource - Config SATA IRQ/INT# resource
*
*
*
* @param[in] FchDataPtr Fch configuration structure pointer.
* @param[in] StdHeader
*
*/
VOID
SataSetIrqIntResource (
IN VOID *FchDataPtr,
IN AMD_CONFIG_PARAMS *StdHeader
)
{
UINT8 ValueByte;
FCH_DATA_BLOCK *LocalCfgPtr;
LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
//
// IRQ14/IRQ15 come from IDE or SATA
//
ValueByte = 0x08;
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC00, &ValueByte, StdHeader);
LibAmdIoRead (AccessWidth8, FCH_IOMAP_REGC01, &ValueByte, StdHeader);
ValueByte = ValueByte & 0x0F;
if (LocalCfgPtr->Sata.SataClass == SataLegacyIde) {
ValueByte = ValueByte | 0x50;
} else {
if (LocalCfgPtr->Sata.SataIdeMode == 1) {
//
// Both IDE & SATA set to Native mode
//
ValueByte = ValueByte | 0xF0;
}
}
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC01, &ValueByte, StdHeader);
}
/**
* WriteEc8 - Write date into EC register
*
*
*
* @param[in] Address - EC Register Offset Value
* @param[in] Value - Write Data Buffer
* @param[in] StdHeader
*
*/
VOID
WriteEc8 (
IN UINT8 Address,
IN UINT8 *Value,
IN AMD_CONFIG_PARAMS *StdHeader
)
{
UINT16 EcIndexPortDword;
ReadPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGA4, AccessWidth16, &EcIndexPortDword, StdHeader);
EcIndexPortDword &= ~(BIT0);
LibAmdIoWrite (AccessWidth8, EcIndexPortDword, &Address, StdHeader);
LibAmdIoWrite (AccessWidth8, EcIndexPortDword + 1, Value, StdHeader);
}
AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
AGESA_STATUS Status;
UINT8 Value;
UINTN ResetType;
AMD_CONFIG_PARAMS *StdHeader;
ResetType = Data;
StdHeader = ConfigPtr;
//
// Perform the RESET based upon the ResetType. In case of
// WARM_RESET_WHENVER and COLD_RESET_WHENEVER, the request will go to
// AmdResetManager. During the critical condition, where reset is required
// immediately, the reset will be invoked directly by writing 0x04 to port
// 0xCF9 (Reset Port).
//
switch (ResetType) {
case WARM_RESET_WHENEVER:
case COLD_RESET_WHENEVER:
break;
case WARM_RESET_IMMEDIATELY:
case COLD_RESET_IMMEDIATELY:
Value = 0x06;
LibAmdIoWrite (AccessWidth8, 0xCf9, &Value, StdHeader);
break;
default:
break;
}
Status = 0;
return Status;
}
/*++
Routine Description:
Arguments:
DispatchHandle - The handle of this callback, obtained when registering
DispatchContext - Pointer to the EFI_SMM_SW_DISPATCH_CONTEXT
Returns:
None.
--*/
EFI_STATUS
EFIAPI
AmdSmiS3SleepEntryCallback (
IN EFI_HANDLE DispatchHandle,
IN FCH_SMM_SX_REGISTER_CONTEXT *DispatchContext
)
{
UINT8 Index;
UINT8 *pData;
FCH_DATA_BLOCK *pFchPolicy;
pFchPolicy = &gFchInitInSmm.FchPolicy;
// Save entire FCH PCI IRQ routing space (C00/C01)
pData = mFchPciIrqRoutingTable;
Index = 0xFF;
do {
Index++;
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC00, &Index, NULL);
LibAmdIoRead (AccessWidth8, FCH_IOMAP_REGC01, pData++, NULL);
} while (Index != 0xFF);
//Put Usb3 to S0 power rail
RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGEE, AccessWidth8, ~(BIT0 + BIT1), (BIT1 + BIT0));
BackUpCG2 ();
FixPsp4Ehang ();
return EFI_SUCCESS;
}
/**
* SoftwareDisableImc - Software disable IMC strap
*
*
* @param[in] FchDataPtr Fch configuration structure pointer.
*
*/
VOID
SoftwareDisableImc (
IN VOID *FchDataPtr
)
{
UINT8 ValueByte;
UINT8 PortStatusByte;
UINT32 AbValue;
UINT32 ABStrapOverrideReg;
AMD_CONFIG_PARAMS *StdHeader;
StdHeader = ((FCH_DATA_BLOCK *) FchDataPtr)->StdHeader;
GetChipSysMode (&PortStatusByte, StdHeader);
RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGC8 + 3, AccessWidth8, 0x7F, BIT7, StdHeader);
ReadPmio (FCH_PMIOA_REGBF, AccessWidth8, &ValueByte, StdHeader);
ReadMem ((ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG80), AccessWidth32, &AbValue);
ABStrapOverrideReg = AbValue;
ABStrapOverrideReg &= ~BIT2; // bit2=0 EcEnableStrap
WriteMem ((ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG84), AccessWidth32, &ABStrapOverrideReg);
ReadPmio (FCH_PMIOA_REGD7, AccessWidth8, &ValueByte, StdHeader);
ValueByte |= BIT1; // Set GenImcClkEn to 1
WritePmio (FCH_PMIOA_REGD7, AccessWidth8, &ValueByte, StdHeader);
ValueByte = 06;
LibAmdIoWrite (AccessWidth8, 0xcf9, &ValueByte, StdHeader);
FchStall (0xffffffff, StdHeader);
}
/**
* AbCfgTbl - Program ABCFG by input table.
*
*
* @param[in] ABTbl ABCFG config table.
* @param[in] StdHeader
*
*/
VOID
AbCfgTbl (
IN AB_TBL_ENTRY *ABTbl,
IN AMD_CONFIG_PARAMS *StdHeader
)
{
UINT32 AbValue;
while ( (ABTbl->RegType) != 0xFF ) {
if ( ABTbl->RegType == AXINDC ) {
AbValue = 0x30 | (ABTbl->RegType << 29);
WriteAlink (AbValue, (ABTbl->RegIndex & 0x00FFFFFF), StdHeader);
AbValue = 0x34 | (ABTbl->RegType << 29);
WriteAlink (AbValue, ((ReadAlink (AbValue, StdHeader)) & (0xFFFFFFFF^ (ABTbl->RegMask))) | ABTbl->RegData, StdHeader);
} else if ( ABTbl->RegType == AXINDP ) {
AbValue = 0x38 | (ABTbl->RegType << 29);
WriteAlink (AbValue, (ABTbl->RegIndex & 0x00FFFFFF), StdHeader);
AbValue = 0x3C | (ABTbl->RegType << 29);
WriteAlink (AbValue, ((ReadAlink (AbValue, StdHeader)) & (0xFFFFFFFF^ (ABTbl->RegMask))) | ABTbl->RegData, StdHeader);
} else {
AbValue = ABTbl->RegIndex | (ABTbl->RegType << 29);
WriteAlink (AbValue, ((ReadAlink (AbValue, StdHeader)) & (0xFFFFFFFF^ (ABTbl->RegMask))) | ABTbl->RegData, StdHeader);
}
++ABTbl;
}
//
//Clear ALink Access Index
//
AbValue = 0;
LibAmdIoWrite (AccessWidth32, ALINK_ACCESS_INDEX, &AbValue, StdHeader);
}
/**
* FchInitEnvIr - Config Ir controller before PCI emulation
*
*
*
* @param[in] FchDataPtr Fch configuration structure pointer.
*
*/
VOID
FchInitEnvIr (
IN VOID *FchDataPtr
)
{
IR_CONFIG FchIrConfig;
UINT8 Data;
FCH_DATA_BLOCK *LocalCfgPtr;
AMD_CONFIG_PARAMS *StdHeader;
LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
StdHeader = LocalCfgPtr->StdHeader;
FchIrConfig = LocalCfgPtr->Ir.IrConfig;
//
//IR init Logical device 0x05
//
if (FchIrConfig != IrDisable) {
EnterEcConfig (StdHeader);
RwEc8 (0x07, 0x00, 0x05, StdHeader); ///Select logical device 05, IR controller
RwEc8 (0x60, 0x00, 0x05, StdHeader); ///Set Base Address to 550h
RwEc8 (0x61, 0x00, 0x50, StdHeader);
RwEc8 (0x70, 0xF0, 0x05, StdHeader); ///Set IRQ to 05h
RwEc8 (0x30, 0x00, 0x01, StdHeader); ///Enable logical device 5, IR controller
Data = 0xAB;
LibAmdIoWrite (AccessWidth8, 0x550, &Data, StdHeader);
LibAmdIoRead (AccessWidth8, 0x551, &Data, StdHeader);
Data = (((Data & 0xFC ) | 0x20) | (UINT8) FchIrConfig);
LibAmdIoWrite (AccessWidth8, 0x551, &Data, StdHeader);
ExitEcConfig (StdHeader);
Data = 0xA0; /// EC APIC index
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC00, &Data, StdHeader);
Data = 0x05; /// IRQ5
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC01, &Data, StdHeader);
} else {
EnterEcConfig (StdHeader);
RwEc8 (0x07, 0x00, 0x05, StdHeader); ///Select logical device 05, IR controller
RwEc8 (0x30, 0x00, 0x00, StdHeader); ///Disable logical device 5, IR controller
ExitEcConfig (StdHeader);
}
}
/**
* Write PCI config space
*
*
* @param[in] AccessWidth Access width
* @param[in] PciAddress Pci address
* @param[in] Value Pointer to data
* @param[in] StdHeader Standard configuration header
*
*/
VOID
LibAmdPciWrite (
IN ACCESS_WIDTH AccessWidth,
IN PCI_ADDR PciAddress,
IN VOID *Value,
IN OUT AMD_CONFIG_PARAMS *StdHeader
)
{
UINT32 Address32;
Address32 = BIT31 + (UINT32) ((PciAddress.Address.Bus << 16) + \
(PciAddress.Address.Device << 11) + \
(PciAddress.Address.Function << 8) + \
(PciAddress.Address.Register & 0xFF));
LibAmdIoWrite (AccessWidth32, CFG_ADDR_PORT, &Address32, StdHeader);
LibAmdIoWrite (AccessWidth, CFG_DATA_PORT, Value, StdHeader);
}
/**< outPort80 - Reserved */
VOID
OutPort80 (
IN UINT32 pcode,
IN AMD_CONFIG_PARAMS *StdHeader
)
{
LibAmdIoWrite (AccessWidth8, FCHOEM_OUTPUT_DEBUG_PORT, &pcode, StdHeader);
return;
}
/**< outPort1080 - Reserved */
VOID
OutPort1080 (
IN UINT32 pcode,
IN AMD_CONFIG_PARAMS *StdHeader
)
{
LibAmdIoWrite (AccessWidth32, 0x1080, &pcode, StdHeader);
return;
}
/**
* FchSataDriveDetectionFpga
*
* @param[in] LocalCfgPtr
* @param[in] Bar5
*
*/
VOID
FchSataDriveDetectionFpga (
IN FCH_DATA_BLOCK *LocalCfgPtr,
IN UINT32 *Bar5
)
{
UINT32 SataBarFpgaInfo;
UINT8 PortNum;
UINT8 SataFpaPortType;
UINT16 IoBase;
UINT32 SataFpgaLoopVarWord;
AMD_CONFIG_PARAMS *StdHeader;
StdHeader = LocalCfgPtr->StdHeader;
TRACE ((DMSG_FCH_TRACE, "FCH - Entering sata drive detection procedure\n\n"));
TRACE ((DMSG_FCH_TRACE, "SATA BAR5 is %X \n", *pBar5));
for ( PortNum = 0; PortNum < 4; PortNum++ ) {
ReadMem (*Bar5 + FCH_SATA_BAR5_REG128 + PortNum * 0x80, AccWidthUint32, &SataBarFpgaInfo);
if ( ( SataBarFpgaInfo & 0x0F ) == 0x03 ) {
if ( PortNum & BIT0 ) {
//this port belongs to secondary channel
ReadPci (((UINT32) (SATA_BUS_DEV_FUN_FPGA << 16) + FCH_SATA_REG18), AccWidthUint16, &IoBase);
} else {
//this port belongs to primary channel
ReadPci (((UINT32) (SATA_BUS_DEV_FUN_FPGA << 16) + FCH_SATA_REG10), AccWidthUint16, &IoBase);
}
//if legacy ide mode, then the bar registers don't contain the correct values. So we need to hardcode them
if ( LocalCfgPtr->Sata.SataClass == SataLegacyIde ) {
IoBase = ( (0x170) | ((UINT16) ( (~((UINT8) (PortNum & BIT0) << 7)) & 0x80 )) );
}
if ( PortNum & BIT1 ) {
//this port is slave
SataFpaPortType = 0xB0;
} else {
//this port is master
SataFpaPortType = 0xA0;
}
IoBase &= 0xFFF8;
LibAmdIoWrite (AccessWidth8, IoBase + 6, &SataFpaPortType, StdHeader);
//Wait in loop for 30s for the drive to become ready
for ( SataFpgaLoopVarWord = 0; SataFpgaLoopVarWord < 300000; SataFpgaLoopVarWord++ ) {
LibAmdIoRead (AccessWidth8, IoBase + 7, &SataFpaPortType, StdHeader);
if ( (SataFpaPortType & 0x88) == 0 ) {
break;
}
FchStall (100, StdHeader);
}
}
}
}
/**
* Print formated string with redirect IO
*
* @param[in] Buffer - Point to input buffer
* @param[in] BufferSize - Buffer size
* @param[in] debugPrintPrivate - Option
*
**/
VOID
AmdIdsRedirectIoPrint (
IN CHAR8 *Buffer,
IN UINTN BufferSize,
IN IDS_DEBUG_PRINT_PRIVATE_DATA *debugPrintPrivate
)
{
UINT32 Value;
Value = REDIRECT_IO_DATA_BEGIN;
LibAmdIoWrite (AccessWidth32, IDS_DEBUG_PRINT_IO_PORT, &Value, NULL);
while (BufferSize--) {
LibAmdIoWrite (AccessWidth8, IDS_DEBUG_PRINT_IO_PORT, Buffer++, NULL);
}
Value = REDIRECT_IO_DATA_END;
LibAmdIoWrite (AccessWidth32, IDS_DEBUG_PRINT_IO_PORT, &Value, NULL);
}
/**< FchReset - Reserved */
VOID
FchReset (
IN AMD_CONFIG_PARAMS *StdHeader
)
{
UINT8 PciRstValue;
PciRstValue = 0x06;
LibAmdIoWrite (AccessWidth8, FCH_PCIRST_BASE_IO, &PciRstValue, StdHeader);
}
EFI_STATUS
EFIAPI
AmdStopTimerSmiCallback (
IN EFI_HANDLE DispatchHandle,
IN FCH_SMM_SW_REGISTER_CONTEXT *DispatchContext
)
{
ACPIMMIO16 (ACPI_MMIO_BASE + SMI_BASE + FCH_SMI_REG96) &= ~SMI_TIMER_ENABLE;
LibAmdIoWrite (AccessWidth16, 0x80, &SavePort80, NULL);
return EFI_SUCCESS;
}
VOID
GnbLibIoWrite (
IN UINT16 Address,
IN ACCESS_WIDTH Width,
IN VOID *Value,
IN VOID *StdHeader
)
{
if (Width >= AccessS3SaveWidth8) {
S3_SAVE_IO_WRITE (StdHeader, Address, Width, Value);
}
LibAmdIoWrite (Width, Address, Value, StdHeader);
}
/**
* ExitEcConfig - Force EC exit Config mode
*
*
*
*
*/
VOID
ExitEcConfig (
IN AMD_CONFIG_PARAMS *StdHeader
)
{
UINT16 EcIndexPortDword;
UINT8 FchEcData8;
ReadPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGA4, AccessWidth16, &EcIndexPortDword, StdHeader);
EcIndexPortDword &= ~(BIT0);
FchEcData8 = 0xA5;
LibAmdIoWrite (AccessWidth8, EcIndexPortDword, &FchEcData8, StdHeader);
}
VOID
WriteECmsg (
IN UINT8 Address,
IN UINT8 OpFlag,
IN VOID *Value,
IN AMD_CONFIG_PARAMS *StdHeader
)
{
UINT8 Index;
OpFlag = OpFlag & 0x7f;
if (OpFlag == 0x02) {
OpFlag = 0x03;
}
for (Index = 0; Index <= OpFlag; Index++) {
/// EC_LDN9_MAILBOX_BASE_ADDRESS
LibAmdIoWrite (AccessWidth8, 0x3E, &Address, StdHeader);
Address++;
/// EC_LDN9_MAILBOX_BASE_ADDRESS
LibAmdIoWrite (AccessWidth8, 0x3F, (UINT8 *)Value + Index, StdHeader);
}
}
/**
* StressResetModeLate - Stress Reset Mode
*
*
*
* @param[in] FchDataPtr
*
*/
VOID
StressResetModeLate (
IN VOID *FchDataPtr
)
{
UINT8 ResetValue;
FCH_DATA_BLOCK *LocalCfgPtr;
AMD_CONFIG_PARAMS *StdHeader;
LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
StdHeader = LocalCfgPtr->StdHeader;
switch ( LocalCfgPtr->HwAcpi.StressResetMode ) {
case 0:
return;
case 1:
ResetValue = FCH_KBC_RESET_COMMAND;
LibAmdIoWrite (AccessWidth8, FCH_KBDRST_BASE_IO, &ResetValue, StdHeader);
break;
case 2:
ResetValue = FCH_PCI_RESET_COMMAND06;
LibAmdIoWrite (AccessWidth8, FCH_PCIRST_BASE_IO, &ResetValue, StdHeader);
break;
case 3:
ResetValue = FCH_PCI_RESET_COMMAND0E;
LibAmdIoWrite (AccessWidth8, FCH_PCIRST_BASE_IO, &ResetValue, StdHeader);
break;
case 4:
LocalCfgPtr->HwAcpi.StressResetMode = 3;
return;
default:
ASSERT (FALSE);
return;
}
while (LocalCfgPtr->HwAcpi.StressResetMode) {
}
}
/**
* AgesaDoReset
*
* Description
* Call the host environment interface to perform reset.
*
* @param[in] ResetType
* @param[in,out] *StdHeader
*
* @return void
*
*/
VOID
AgesaDoReset (
IN UINTN ResetType,
IN OUT AMD_CONFIG_PARAMS *StdHeader
)
{
EFI_PEI_SERVICES **PeiServices;
UINT8 Value;
EFI_STATUS Status;
WARM_RESET_REQUEST Request;
PeiServices = (EFI_PEI_SERVICES **)StdHeader->ImageBasePtr;
GetWarmResetFlag (StdHeader, &Request);
Request.RequestBit = FALSE;
Request.StateBits = Request.PostStage;
SetWarmResetFlag (StdHeader, &Request);
//
// Perform the RESET based upon the ResetType. In case of
// WARM_RESET_WHENVER and COLD_RESET_WHENEVER, the request will go to
// AmdResetManager. During the critical condition, where reset is required
// immediately, the reset will be invoked directly by writing 0x04 to port
// 0xCF9 (Reset Port).
//
switch (ResetType) {
case WARM_RESET_WHENEVER:
case COLD_RESET_WHENEVER:
(**PeiServices).InstallPpi (PeiServices, &mAmdPeiResetRequestPpi);
break;
case WARM_RESET_IMMEDIATELY:
case COLD_RESET_IMMEDIATELY:
Status = (**PeiServices).PeiResetSystem (PeiServices);
//
// We should not come here if PeiResetSystem is present.
// In case it is missing and gets reported through
// EFI_NOT_AVAILABLE_YET, perform the force reset
//
if (EFI_ERROR (Status)) {
Value = 0x06;
LibAmdIoWrite (AccessWidth8, 0xCf9, &Value, StdHeader);
}
break;
default:
(**PeiServices).InstallPpi (PeiServices, &mAmdPeiResetRequestPpi);
break;
}
}
EFI_STATUS
EFIAPI
AmdSmiAcpiOffCallback (
IN EFI_HANDLE DispatchHandle,
IN FCH_SMM_SW_REGISTER_CONTEXT *DispatchContext
)
{
UINT16 AcpiPmbase;
UINT32 ddValue;
GetFchAcpiPmBase (&AcpiPmbase, NULL);
// Turn off SCI
LibAmdIoRead (AccessWidth32, AcpiPmbase + R_FCH_ACPI_PM_CONTROL, &ddValue, NULL);
ddValue &= ~BIT0;
LibAmdIoWrite (AccessWidth32, AcpiPmbase + R_FCH_ACPI_PM_CONTROL, &ddValue, NULL);
return EFI_SUCCESS;
}
/*********************************************************************************
* Name: FchSataOnRecovery
*
* Description
*
*
* Input
* FchPrivate : FCH PEI private data structure
* SataBar0 : BAR0 register value of Sata controller
* SataBar5 : BAR5 register value of Sata controller
*
* Output
*
*
*********************************************************************************/
EFI_STATUS
FchSataOnRecovery (
IN FCH_PEI_PRIVATE FchPrivate,
IN UINT32 SataBar0,
IN UINT32 SataBar5
)
{
UINT8 ValueByte;
AMD_CONFIG_PARAMS StdHeader;
StdHeader = FchPrivate.StdHdr;
RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG40), AccessWidth8, 0xff, BIT0, &StdHeader);
RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG44), AccessWidth8, 0xff, BIT0, &StdHeader);
RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG44 + 2), AccessWidth8, 0, 0x20, &StdHeader);
RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG40), AccessWidth8, 0xff, BIT4, &StdHeader);
RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG48 + 3), AccessWidth8, 0xff, BIT7, &StdHeader);
RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG4C + 3), AccessWidth8, 0x07, 0xF8, &StdHeader);
RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG4C), AccessWidth32, (UINT32) (~ (0xF8 << 26)), (UINT32) (0xF8 << 26), &StdHeader);
RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG48), AccessWidth32, (UINT32) (~ (0x01 << 11)), (UINT32) (0x01 << 11), &StdHeader);
RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG84), AccessWidth32, (UINT32) (~ (0x01 << 31)), (UINT32) (0x00 << 31), &StdHeader);
RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG08), AccessWidth32, 0, 0x01018F40, &StdHeader);
RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG02), AccessWidth16, 0, FCH_SATA_DID, &StdHeader);
ValueByte = 0x08;
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC00, &ValueByte, &StdHeader);
LibAmdIoRead (AccessWidth8, FCH_IOMAP_REGC01, &ValueByte, &StdHeader);
//
// SATA PHY Programming Sequence
//
FchRecoveryProgramSataPhy (&StdHeader);
RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG10), AccessWidth32, BIT0, SataBar0, &StdHeader);
RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG14), AccessWidth32, BIT0, SataBar0 + 0x100, &StdHeader);
RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG18), AccessWidth32, BIT0, SataBar0 + 0x200, &StdHeader);
RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG1C), AccessWidth32, BIT0, SataBar0 + 0x300, &StdHeader);
RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG20), AccessWidth32, BIT0, SataBar0 + 0x400, &StdHeader);
RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG24), AccessWidth32, 0xff, SataBar5, &StdHeader);
RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG04), AccessWidth8, 0, BIT0 + BIT1, &StdHeader);
RwPci (((SATA_BUS_DEV_FUN << 16) + FCH_SATA_REG40), AccessWidth8, ~BIT0, 0, &StdHeader);
return EFI_SUCCESS;
}
EFI_STATUS
EFIAPI
AmdSmiAcpiOnCallback (
IN EFI_HANDLE DispatchHandle,
IN FCH_SMM_SW_REGISTER_CONTEXT *DispatchContext
)
{
FCH_DATA_BLOCK *pFchPolicy;
UINT16 AcpiPmbase;
UINT8 dbIndex;
UINT8 dbIrq;
UINT32 ddValue;
//EFI_DEADLOOP ();
// WriteIO16 (0x80, 0xAACC);
GetFchAcpiPmBase (&AcpiPmbase, NULL);
pFchPolicy = &gFchInitInSmm.FchPolicy;
FchSmmAcpiOn (pFchPolicy);
// Disable all GPE events and clear all GPE status
ddValue = 0;
LibAmdIoWrite (AccessWidth32, AcpiPmbase + R_FCH_ACPI_EVENT_ENABLE, &ddValue, NULL);
LibAmdIoWrite (AccessWidth32, AcpiPmbase + R_FCH_ACPI_EVENT_STATUS, &ddValue, NULL);
// Set ACPI IRQ to IRQ9 for non-APIC OSes
dbIndex = 0x10; // PIC - SCI
dbIrq = 9;
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC00, &dbIndex, NULL);
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC01, &dbIrq, NULL);
dbIndex |= BIT7; // IOAPIC - SCI
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC00, &dbIndex, NULL);
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC01, &dbIrq, NULL);
// Finally enable SCI
LibAmdIoRead (AccessWidth32, AcpiPmbase + R_FCH_ACPI_PM_CONTROL, &ddValue, NULL);
ddValue |= BIT0;
LibAmdIoWrite (AccessWidth32, AcpiPmbase + R_FCH_ACPI_PM_CONTROL, &ddValue, NULL);
return EFI_SUCCESS;
}
/**
* Prepare an FCH AB link entry on a family 15h Carrizo core.
*
* @param[in] CurrentEntry Current entry to process
*
* @return Pointer to next table entry
*/
CS_RESTORATION_ENTRY_HEADER*
F15CzProcessFchAbEntry (
IN CS_RESTORATION_ENTRY_HEADER *CurrentEntry
)
{
UINT32 RegisterIndex;
UINT64 MmioAddr;
CS_FCH_AB *FchAbEntry;
FchAbEntry = (CS_FCH_AB *) CurrentEntry;
if (FchAbEntry->Header.SaveReadValue) {
if (AbIoAddress == 0xFFFF) {
MmioAddr = 0xFED803E0;
LibAmdMemRead (AccessWidth16, MmioAddr, &AbIoAddress, NULL);
}
RegisterIndex = FchAbEntry->Address + 0xC0000000;
LibAmdIoWrite (AccessWidth32, AbIoAddress, &RegisterIndex, NULL);
LibAmdIoRead (AccessWidth32, AbIoAddress + 4, &FchAbEntry->Value, NULL);
}
FchAbEntry++;
return &FchAbEntry->Header;
}
/**
* Send byte to Serial Port
*
* Before use this routine, please make sure Serial Communications Chip have been initialed
*
* @param[in] ByteSended Byte to be sended
*
* @retval TRUE Byte sended successfully
* @retval FALSE Byte sended failed
*
**/
BOOLEAN
AmdIdsSerialSendByte (
IN CHAR8 ByteSended
)
{
UINT32 RetryCount;
UINT8 Value;
//Wait until LSR.Bit5 (Transmitter holding register Empty)
RetryCount = 200;
do {
LibAmdIoRead (AccessWidth8, IDS_SERIAL_PORT_LSR, &Value, NULL);
RetryCount--;
} while (((Value & IDS_LSR_TRANSMIT_HOLDING_REGISTER_EMPTY_MASK) == 0) &&
(RetryCount > 0));
if (RetryCount == 0) {
//Time expired
return FALSE;
} else {
LibAmdIoWrite (AccessWidth8, IDS_SERIAL_PORT, &ByteSended, NULL);
return TRUE;
}
}
/**
* FchInitEnvAbLinkInit - Set ABCFG registers before PCI
* emulation.
*
*
* @param[in] FchDataPtr Fch configuration structure pointer.
*
*/
VOID
FchInitEnvAbLinkInit (
IN VOID *FchDataPtr
)
{
UINT16 AbTempVar;
UINT8 AbValue8;
UINT8 FchALinkClkGateOff;
UINT8 FchBLinkClkGateOff;
AB_TBL_ENTRY *AbTblPtr;
FCH_DATA_BLOCK *LocalCfgPtr;
AMD_CONFIG_PARAMS *StdHeader;
LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
StdHeader = LocalCfgPtr->StdHeader;
FchALinkClkGateOff = (UINT8) LocalCfgPtr->Ab.ALinkClkGateOff;
FchBLinkClkGateOff = (UINT8) LocalCfgPtr->Ab.BLinkClkGateOff;
//
// AB CFG programming
//
if ( LocalCfgPtr->Ab.SlowSpeedAbLinkClock ) {
RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG40, AccessWidth8, ~(UINT32) BIT1, BIT1);
} else {
RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG40, AccessWidth8, ~(UINT32) BIT1, 0);
}
//
// Read Arbiter address, Arbiter address is in PMIO 6Ch
//
ReadMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG6C, AccessWidth16, &AbTempVar);
/// Write 0 to enable the arbiter
AbValue8 = 0;
LibAmdIoWrite (AccessWidth8, AbTempVar, &AbValue8, StdHeader);
if ( LocalCfgPtr->Ab.PcieOrderRule == 1 ) {
AbTblPtr = (AB_TBL_ENTRY *) (&Hudson2PcieOrderRule[0]);
AbCfgTbl (AbTblPtr, StdHeader);
}
if ( LocalCfgPtr->Ab.PcieOrderRule == 2 ) {
RwAlink (FCH_ABCFG_REG10090 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x7 << 10), (UINT32) (0x7 << 10), StdHeader);
RwAlink (FCH_ABCFG_REG58 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1F << 11), (UINT32) (0x1C << 11), StdHeader);
RwAlink (FCH_ABCFG_REGB4 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x3 << 0), (UINT32) (0x3 << 0), StdHeader);
}
AbTblPtr = (AB_TBL_ENTRY *) (&Hudson2InitEnvAbTable[0]);
AbCfgTbl (AbTblPtr, StdHeader);
if ( LocalCfgPtr->Ab.ResetCpuOnSyncFlood ) {
RwAlink (FCH_ABCFG_REG10050 | (UINT32) (ABCFG << 29), ~(UINT32) BIT2, BIT2, StdHeader);
}
if ( LocalCfgPtr->Ab.AbClockGating ) {
RwAlink (FCH_ABCFG_REG10054 | (UINT32) (ABCFG << 29), ~ (UINT32) (0xFF << 16), (UINT32) (0x4 << 16), StdHeader);
RwAlink (FCH_ABCFG_REG54 | (UINT32) (ABCFG << 29), ~ (UINT32) (0xFF << 16), (UINT32) (0x4 << 16), StdHeader);
RwAlink (FCH_ABCFG_REG10054 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 24), (UINT32) (0x1 << 24), StdHeader);
RwAlink (FCH_ABCFG_REG54 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 24), (UINT32) (0x1 << 24), StdHeader);
} else {
RwAlink (FCH_ABCFG_REG10054 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 24), (UINT32) (0x0 << 24), StdHeader);
RwAlink (FCH_ABCFG_REG54 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 24), (UINT32) (0x0 << 24), StdHeader);
}
if ( LocalCfgPtr->Ab.GppClockGating ) {
RwAlink (FCH_ABCFG_REG98 | (UINT32) (ABCFG << 29), ~ (UINT32) (0xF << 12), (UINT32) (0x4 << 12), StdHeader);
RwAlink (FCH_ABCFG_REG98 | (UINT32) (ABCFG << 29), ~ (UINT32) (0xF << 8), (UINT32) (0x7 << 8), StdHeader);
RwAlink (FCH_ABCFG_REG90 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 0), (UINT32) (0x1 << 0), StdHeader);
} else {
RwAlink (FCH_ABCFG_REG98 | (UINT32) (ABCFG << 29), ~ (UINT32) (0xF << 8), (UINT32) (0x0 << 8), StdHeader);
RwAlink (FCH_ABCFG_REG90 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 0), (UINT32) (0x0 << 0), StdHeader);
}
if ( LocalCfgPtr->Ab.UmiL1TimerOverride ) {
RwAlink (FCH_ABCFG_REG90 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x7 << 12), (UINT32) (LocalCfgPtr->Ab.UmiL1TimerOverride << 12), StdHeader);
RwAlink (FCH_ABCFG_REG90 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 15), (UINT32) (0x1 << 15), StdHeader);
}
if ( LocalCfgPtr->Ab.UmiLinkWidth ) {
// RwAlink (FCH_ABCFG_REG54 | (UINT32) (ABCFG << 29), ~ (UINT32) (0xFF << 16), (UINT32) (0x4 << 16));
}
if ( LocalCfgPtr->Ab.PcieRefClockOverClocking ) {
// RwAlink (FCH_ABCFG_REG54 | (UINT32) (ABCFG << 29), ~ (UINT32) (0xFF << 16), (UINT32) (0x4 << 16));
}
if ( LocalCfgPtr->Ab.UmiGppTxDriverStrength ) {
RwAlink (FCH_ABCFG_REGA8 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x3 << 18), (UINT32) ((LocalCfgPtr->Ab.UmiGppTxDriverStrength - 1) << 18), StdHeader);
RwAlink (FCH_ABCFG_REGA0 | (UINT32) (ABCFG << 29), ~ (UINT32) (0x1 << 8), (UINT32) (0x1 << 8), StdHeader);
}
if ( LocalCfgPtr->Gpp.PcieAer ) {
// RwAlink (FCH_ABCFG_REG54 | (UINT32) (ABCFG << 29), ~ (UINT32) (0xFF << 16), (UINT32) (0x4 << 16));
}
if ( LocalCfgPtr->Gpp.PcieRas ) {
// RwAlink (FCH_ABCFG_REG54 | (UINT32) (ABCFG << 29), ~ (UINT32) (0xFF << 16), (UINT32) (0x4 << 16));
}
//
// Ab Bridge MSI
//
if ( LocalCfgPtr->Ab.AbMsiEnable) {
// AbValue = ReadAlink (FCH_ABCFG_REG94 | (UINT32) (ABCFG << 29), StdHeader);
// AbValue = AbValue | BIT20;
// WriteAlink (FCH_ABCFG_REG94 | (UINT32) (ABCFG << 29), AbValue, StdHeader);
}
//
// A/B Clock Gate-OFF
//
if ( FchALinkClkGateOff ) {
RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG2C + 2, AccessWidth8, 0xFE, BIT0);
} else {
RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG2C + 2, AccessWidth8, 0xFE, 0x00);
}
if ( FchBLinkClkGateOff ) {
//RwMem (ACPI_MMIO_BASE + MISC_BASE + 0x2D, AccessWidth8, 0xEF, 0x10); /// A11 Only
RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG2C + 2, AccessWidth8, 0xFD, BIT1);
} else {
RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG2C + 2, AccessWidth8, 0xFD, 0x00);
}
if ( FchALinkClkGateOff | FchBLinkClkGateOff ) {
RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG04 + 2, AccessWidth8, 0xFE, BIT0);
} else {
RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG04 + 2, AccessWidth8, 0xFE, 0);
}
if ( ReadFchChipsetRevision ( StdHeader ) == FCH_BOLTON ) {
// Enable fix for race problem between PLL calibrator and LC wake up from L1.
RwAlink (FCH_AX_INDXC_REG02, ~(UINT32) (BIT8), BIT8, StdHeader);
// Set this bit to 1 to allow for proper ASPM L1 and L0s transitions when PLL power-down in L1 is enabled.
RwAlink ((FCH_ABCFG_REGB8 | (UINT32) (ABCFG << 29)), 0xFFFFFFFF, BIT30, StdHeader);
// A/B Clock Gate-OFF
RwMem (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG2C + 2, AccessWidth8, 0xFC, 0x03);
RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG04 + 2, AccessWidth8, 0xFE, BIT0);
}
}
/**
* FchInitResetHwAcpi - Config HwAcpi controller during Power-On
*
*
*
* @param[in] FchDataPtr Fch configuration structure pointer.
*
*/
VOID
FchInitResetHwAcpi (
IN VOID *FchDataPtr
)
{
UINT16 SmbusBase;
UINT8 Value;
UINT16 AsfPort;
FCH_RESET_DATA_BLOCK *LocalCfgPtr;
AMD_CONFIG_PARAMS *StdHeader;
LocalCfgPtr = (FCH_RESET_DATA_BLOCK *) FchDataPtr;
StdHeader = LocalCfgPtr->StdHeader;
//
// Set Build option into SB
//
WritePci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REG64, AccessWidth16, &(UserOptions.CfgSioPmeBaseAddress), StdHeader);
//
// Enabled SMBUS0/SMBUS1 (ASF) Base Address
//
RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG2C, AccessWidth16, 06, (UserOptions.CfgSmbus0BaseAddress) + BIT0); ///protect BIT[2:1]
RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG28, AccessWidth16, 06, (UserOptions.CfgSmbus1BaseAddress) + BIT0);
RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG60, AccessWidth16, 00, (UserOptions.CfgAcpiPm1EvtBlkAddr));
RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG62, AccessWidth16, 00, (UserOptions.CfgAcpiPm1CntBlkAddr));
RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG64, AccessWidth16, 00, (UserOptions.CfgAcpiPmTmrBlkAddr));
RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG66, AccessWidth16, 00, (UserOptions.CfgCpuControlBlkAddr));
RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG68, AccessWidth16, 00, (UserOptions.CfgAcpiGpe0BlkAddr));
RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG6A, AccessWidth16, 00, (UserOptions.CfgSmiCmdPortAddr));
RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG6C, AccessWidth16, 00, (UserOptions.CfgAcpiPmaCntBlkAddr));
RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG6E, AccessWidth16, 00, (UserOptions.CfgSmiCmdPortAddr) + 8);
RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG48, AccessWidth32, 00, (UserOptions.CfgWatchDogTimerBase));
RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REG2E, AccessWidth8, ~(BIT1 + BIT2), 0); ///clear BIT[2:1]
SmbusBase = (UINT16) (UserOptions.CfgSmbus0BaseAddress);
Value = 0x00;
LibAmdIoWrite (AccessWidth8, SmbusBase + 0x14, &Value, StdHeader);
ProgramFchAcpiMmioTbl ((ACPI_REG_WRITE*) (&FchInitResetAcpiMmioTable[0]), StdHeader);
//
// Prevent RTC error
//
Value = 0x0A;
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REG70, &Value, StdHeader);
LibAmdIoRead (AccessWidth8, FCH_IOMAP_REG71, &Value, StdHeader);
Value &= 0xEF;
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REG71, &Value, StdHeader);
Value = 0x08;
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC00, &Value, StdHeader);
LibAmdIoRead (AccessWidth8, FCH_IOMAP_REGC01, &Value, StdHeader);
if ( !LocalCfgPtr->EcKbd ) {
//
// Route SIO IRQ1/IRQ12 to USB IRQ1/IRQ12 input
//
Value = Value | 0x0A;
}
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC01, &Value, StdHeader);
Value = 0x09;
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC00, &Value, StdHeader);
LibAmdIoRead (AccessWidth8, FCH_IOMAP_REGC01, &Value, StdHeader);
if ( !LocalCfgPtr->EcKbd ) {
//
// Route SIO IRQ1/IRQ12 to USB IRQ1/IRQ12 input
//
Value = Value & 0xF9;
}
if ( LocalCfgPtr->LegacyFree ) {
//
// Disable IRQ1/IRQ12 filter enable for Legacy free with USB KBC emulation.
//
Value = Value & 0x9F;
}
//
// Enabled IRQ input
//
Value = Value | BIT4;
LibAmdIoWrite (AccessWidth8, FCH_IOMAP_REGC01, &Value, StdHeader);
AsfPort = ((UINT16) UserOptions.CfgSmbus1BaseAddress & 0xFFF0);
if ( AsfPort != 0 ) {
UINT8 dbValue;
dbValue = 0x70;
LibAmdIoWrite (AccessWidth8, AsfPort + 0x0E, &dbValue, StdHeader);
}
}
