C++ (Cpp) LineSegment_getStart Beispiele

Beispiel #1

Datei: TestLineSegment.cpp Projekt: alexholehouse/SBMLIntegrator

END_TEST

START_TEST ( test_LineSegment_createFrom )
{
   Point* start = new Point(LN,1.1,-2.2,3.3); 
   Point* end=new Point(LN,-4.4,5.5,-6.6); 
   LineSegment_setStart(LS,start);
   LineSegment_setEnd(LS,end);
   LineSegment_t* ls=LineSegment_createFrom(LS);
   
   
   fail_unless( SBase_getTypeCode   ((SBase_t*) ls) == SBML_LAYOUT_LINESEGMENT );
   
   if(SBase_isSetMetaId((SBase_t*)LS)){
     std::string c1=SBase_getMetaId((SBase_t*)LS);
     std::string c2=SBase_getMetaId((SBase_t*)ls);
     fail_unless( c1 == c2 );
   }
//   c1=SBase_getNotes((SBase_t*)LS);
//   c2=SBase_getNotes((SBase_t*)ls);
//   
//   if(SBase_isSetNotes((SBase_t*)LS))
//   {
//     fail_unless( strncmp(c1 , c2 ,strlen( c1 ) + 1 ) );
//   }
//   else
//   {
//     fail_unless(!(c1 || c2));
//   }
//   
//   c1=SBase_getAnnotation((SBase_t*)LS);
//   c2=SBase_getAnnotation((SBase_t*)ls);
//   
//   if(SBase_isSetAnnotation((SBase_t*)LS))
//   {
//     fail_unless( strncmp(c1 , c2 ,strlen( c1 ) + 1) );
//   }
//   else
//   {
//     fail_unless(!(c1 || c2));
//   }
   
   Point_t *pos=LineSegment_getStart(ls);
   Point_t *POS=LineSegment_getStart(LS);
   fail_unless(pos != NULL);
   fail_unless(Point_getXOffset(pos) == Point_getXOffset(POS));  
   fail_unless(Point_getYOffset(pos) == Point_getYOffset(POS));  
   fail_unless(Point_getZOffset(pos) == Point_getZOffset(POS));  
   
   pos=LineSegment_getEnd(ls);
   POS=LineSegment_getEnd(LS);
   fail_unless(pos != NULL);
   fail_unless(Point_getXOffset(pos) == Point_getXOffset(POS));  
   fail_unless(Point_getYOffset(pos) == Point_getYOffset(POS));  
   fail_unless(Point_getZOffset(pos) == Point_getZOffset(POS));  
 
   Point_free(start);
   Point_free(end);
   LineSegment_free(ls);
}

Beispiel #2

Datei: TestLineSegment.cpp Projekt: alexholehouse/SBMLIntegrator

END_TEST


START_TEST ( test_LineSegment_createWithPoints )
{
   Point_t *start=new Point(LN,1.1,-2.2,3.3); 
   Point_t *end  =new Point(LN,-4.4,5.5,-6.6);

   LineSegment_t *ls=new LineSegment(LN, start,end);
   
   fail_unless( SBase_getTypeCode   ((SBase_t*) ls) == SBML_LAYOUT_LINESEGMENT );
   fail_unless( SBase_getMetaId     ((SBase_t*) ls) == NULL );
   
   Point_t *pos=LineSegment_getStart(ls);
   fail_unless(pos != NULL);
   fail_unless(Point_getXOffset(pos) == Point_getXOffset(start));  
   fail_unless(Point_getYOffset(pos) == Point_getYOffset(start));  
   fail_unless(Point_getZOffset(pos) == Point_getZOffset(start));  
   
   pos=LineSegment_getEnd(ls);
   fail_unless(pos != NULL);
   fail_unless(Point_getXOffset(pos) == Point_getXOffset(end));  
   fail_unless(Point_getYOffset(pos) == Point_getYOffset(end));  
   fail_unless(Point_getZOffset(pos) == Point_getZOffset(end));  

   Point_free(start);
   Point_free(end);

   LineSegment_free(ls);
  
}

Beispiel #3

Datei: TestLineSegment.cpp Projekt: mgaldzic/copasi_api

END_TEST

START_TEST ( test_LineSegment_createWithCoordinates )
{
   LineSegment_t* ls=LineSegment_createWithCoordinates(1.1,-2.2,3.3,-4.4,5.5,-6.6);
    
   fail_unless( SBase_getTypeCode   ((SBase_t*) ls) == SBML_LAYOUT_LINESEGMENT );
   fail_unless( SBase_getMetaId     ((SBase_t*) ls) == NULL );
//   fail_unless( SBase_getNotes      ((SBase_t*) ls) == NULL );
//   fail_unless( SBase_getAnnotation ((SBase_t*) ls) == NULL );

   fail_unless( LineSegment_isSetId(ls) == 0 );
   
   Point_t *pos=LineSegment_getStart(ls);
   fail_unless(pos != NULL);
   fail_unless(pos->getXOffset() ==  1.1);  
   fail_unless(pos->getYOffset() == -2.2);  
   fail_unless(pos->getZOffset() ==  3.3);  
   
   pos=LineSegment_getEnd(ls);
   fail_unless(pos != NULL);
   fail_unless(pos->getXOffset() == -4.4);  
   fail_unless(pos->getYOffset() ==  5.5);  
   fail_unless(pos->getZOffset() == -6.6);  

   LineSegment_free(ls); 
}

Beispiel #4

Datei: TestLineSegment.cpp Projekt: mgaldzic/copasi_api

END_TEST

START_TEST ( test_LineSegment_createWithPoints_NULL )
{
   LineSegment_t *ls=LineSegment_createWithPoints(NULL,NULL);
   
   fail_unless( SBase_getTypeCode   ((SBase_t*) ls) == SBML_LAYOUT_LINESEGMENT );
   fail_unless( SBase_getMetaId     ((SBase_t*) ls) == NULL );
//   fail_unless( SBase_getNotes      ((SBase_t*) ls) == NULL );
//   fail_unless( SBase_getAnnotation ((SBase_t*) ls) == NULL );

   fail_unless( LineSegment_isSetId(ls) == 0 );
   
   Point_t *pos=LineSegment_getStart(ls);
   fail_unless(pos != NULL);
   fail_unless(Point_getXOffset(pos) == 0.0);  
   fail_unless(Point_getYOffset(pos) == 0.0);  
   fail_unless(Point_getZOffset(pos) == 0.0);  
   
   pos=LineSegment_getEnd(ls);
   fail_unless(pos != NULL);
   fail_unless(Point_getXOffset(pos) == 0.0);  
   fail_unless(Point_getYOffset(pos) == 0.0);  
   fail_unless(Point_getZOffset(pos) == 0.0);  
 
   LineSegment_free(ls);
}

Beispiel #5

Datei: TestLineSegment.cpp Projekt: mgaldzic/copasi_api

END_TEST


START_TEST ( test_LineSegment_createWithPoints )
{
   Point_t *start=Point_createWithCoordinates(1.1,-2.2,3.3); 
   Point_t *end  =Point_createWithCoordinates(-4.4,5.5,-6.6);

   LineSegment_t *ls=LineSegment_createWithPoints(start,end);
   
   fail_unless( SBase_getTypeCode   ((SBase_t*) ls) == SBML_LAYOUT_LINESEGMENT );
   fail_unless( SBase_getMetaId     ((SBase_t*) ls) == NULL );
//   fail_unless( SBase_getNotes      ((SBase_t*) ls) == NULL );
//   fail_unless( SBase_getAnnotation ((SBase_t*) ls) == NULL );

   fail_unless( LineSegment_isSetId(ls) == 0 );
   
   Point_t *pos=LineSegment_getStart(ls);
   fail_unless(pos != NULL);
   fail_unless(Point_getXOffset(pos) == Point_getXOffset(start));  
   fail_unless(Point_getYOffset(pos) == Point_getYOffset(start));  
   fail_unless(Point_getZOffset(pos) == Point_getZOffset(start));  
   
   pos=LineSegment_getEnd(ls);
   fail_unless(pos != NULL);
   fail_unless(Point_getXOffset(pos) == Point_getXOffset(end));  
   fail_unless(Point_getYOffset(pos) == Point_getYOffset(end));  
   fail_unless(Point_getZOffset(pos) == Point_getZOffset(end));  

   Point_free(start);
   Point_free(end);

   LineSegment_free(ls);
  
}

Beispiel #6

Datei: TestLineSegment.cpp Projekt: alexholehouse/SBMLIntegrator

END_TEST

START_TEST (test_LineSegment_setStart_NULL )
{
    LineSegment_setStart(LS,NULL);

    Point_t *pos=LineSegment_getStart(LS);
    fail_unless(pos != NULL);
    fail_unless(Point_getXOffset(pos) == 0.0);
    fail_unless(Point_getYOffset(pos) == 0.0);
    fail_unless(Point_getZOffset(pos) == 0.0);
}

Beispiel #7

Datei: TestLineSegment.cpp Projekt: mgaldzic/copasi_api

END_TEST

START_TEST (test_LineSegment_setStart){
    Point_t *pos=Point_createWithCoordinates(1.1,-2.2,3.3);
    LineSegment_setStart(LS,pos);

    Point_t* POS=LineSegment_getStart(LS);

    fail_unless(Point_getXOffset(pos) == Point_getXOffset(POS));
    fail_unless(Point_getYOffset(pos) == Point_getYOffset(POS));
    fail_unless(Point_getZOffset(pos) == Point_getZOffset(POS)); 
    Point_free(pos);
}

Beispiel #8

Datei: TestLineSegment.cpp Projekt: mgaldzic/copasi_api

END_TEST

START_TEST ( test_LineSegment_createFrom )
{
   Point_t* start=Point_createWithCoordinates(1.1,-2.2,3.3); 
   Point_t* end=Point_createWithCoordinates(-4.4,5.5,-6.6); 
   LineSegment_setStart(LS,start);
   LineSegment_setEnd(LS,end);
   LineSegment_setId(LS,"TestID");
   LineSegment_t* ls=LineSegment_createFrom(LS);
   
   
   fail_unless( SBase_getTypeCode   ((SBase_t*) ls) == SBML_LAYOUT_LINESEGMENT );
   const char* c1=SBase_getMetaId((SBase_t*)LS);
   const char* c2=SBase_getMetaId((SBase_t*)ls);
   
   if(SBase_isSetMetaId((SBase_t*)LS)){
     fail_unless( strncmp(c1 , c2 ,strlen( c1 )+1 ) );
   }
   else
   {
     fail_unless(!(c1 || c2));
   }
//   c1=SBase_getNotes((SBase_t*)LS);
//   c2=SBase_getNotes((SBase_t*)ls);
//   
//   if(SBase_isSetNotes((SBase_t*)LS))
//   {
//     fail_unless( strncmp(c1 , c2 ,strlen( c1 ) + 1 ) );
//   }
//   else
//   {
//     fail_unless(!(c1 || c2));
//   }
//   
//   c1=SBase_getAnnotation((SBase_t*)LS);
//   c2=SBase_getAnnotation((SBase_t*)ls);
//   
//   if(SBase_isSetAnnotation((SBase_t*)LS))
//   {
//     fail_unless( strncmp(c1 , c2 ,strlen( c1 ) + 1) );
//   }
//   else
//   {
//     fail_unless(!(c1 || c2));
//   }
   
   fail_unless( LineSegment_isSetId(ls) == LineSegment_isSetId(LS) );
   if( LineSegment_isSetId(ls) )
   {
       c1=LineSegment_getId(LS);
       c2=LineSegment_getId(ls);
       fail_unless( strncmp(c1 , c2 ,strlen( c1 ) + 1 ) == 0);
     
   }
   
   Point_t *pos=LineSegment_getStart(ls);
   Point_t *POS=LineSegment_getStart(LS);
   fail_unless(pos != NULL);
   fail_unless(Point_getXOffset(pos) == Point_getXOffset(POS));  
   fail_unless(Point_getYOffset(pos) == Point_getYOffset(POS));  
   fail_unless(Point_getZOffset(pos) == Point_getZOffset(POS));  
   
   pos=LineSegment_getEnd(ls);
   POS=LineSegment_getEnd(LS);
   fail_unless(pos != NULL);
   fail_unless(Point_getXOffset(pos) == Point_getXOffset(POS));  
   fail_unless(Point_getYOffset(pos) == Point_getYOffset(POS));  
   fail_unless(Point_getZOffset(pos) == Point_getZOffset(POS));  
 
   Point_free(start);
   Point_free(end);
   LineSegment_free(ls);
}

Beispiel #9

Datei: CubicBezier.cpp Projekt: sbmlteam/python-libsbml

LIBSBML_EXTERN
Point_t *
CubicBezier_getStart (CubicBezier_t *cb)
{
  return LineSegment_getStart(cb);
}