//------------------------------------------------------------------------------------
// MQTT class implementation
//------------------------------------------------------------------------------------
MQTT::MQTT(const char* client_id, const char* host, uint32_t port) :
onMqttConnectedCb(0)
,onMqttDisconnectedCb(0)
,onMqttPublishedCb(0)
,onMqttDataCb(0)
,onMqttDataRawCb(0)
{
// init connections
MQTT_InitConnection(&mqttClient, host, port);
// init client
MQTT_InitClient(&mqttClient, (uint8_t*)client_id, (uint8_t*)"", (uint8_t*)"", 120, 1);
// init LWT
MQTT_InitLWT(&mqttClient, (uint8_t*)"/lwt", (uint8_t*)"offline", 0, 0);
// set user data
mqttClient.user_data = (void*)this;
// setup callbacks
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
MQTT_OnTimeout(&mqttClient, mqttTimeoutCb);
}
LOCAL void ICACHE_FLASH_ATTR initDone_cb() {
CFG_Load();
os_printf("\n%s starting ...\n", sysCfg.deviceName);
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass,
sysCfg.mqtt_keepalive, 1);
char temp[100];
os_sprintf(temp, "/Raw/%s/offline", sysCfg.device_id);
MQTT_InitLWT(&mqttClient, temp, "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
os_printf("SDK version is: %s\n", system_get_sdk_version());
os_printf("Smart-Config version is: %s\n", smartconfig_get_version());
system_print_meminfo();
os_printf("Flash size map %d; id %lx\n", system_get_flash_size_map(), spi_flash_get_id());
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, sysCfg.deviceName, wifiConnectCb);
lcdInit();
lightOn();
showString(1, 1, "MQTT Monitor");
}
void user_init(void)
{
uart_init(BIT_RATE_9600, BIT_RATE_9600);
os_install_putc1((void *)uart_putc1);
avr_uart_override_rx_intr ();
os_delay_us(1000000);
CFG_Load();
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
INFO("\r\nSystem started ...\r\n");
avr_init_task ();
avr_reg_msg_callback(avr_msg_cb);
}
void user_init(void)
{
system_set_os_print(0);
uart_init(BIT_RATE_115200, BIT_RATE_115200);
os_delay_us(1000000);
CFG_Load();
// Initialize the GPIO subsystem.
gpio_init();
//Set GPIO2 to output mode
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO2_U, FUNC_GPIO2);
//Set GPIO2 high
gpio_output_set(ROOMBA_WAKEUP_PIN, 0, ROOMBA_WAKEUP_PIN, 0);
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
//MQTT_InitConnection(&mqttClient, "192.168.11.122", 1880, 0);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
//MQTT_InitClient(&mqttClient, "client_id", "user", "pass", 120, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
INFO("\r\nSystem started ...\r\n");
}
void ICACHE_FLASH_ATTR
mqtt_init() {
MQTT_InitConnection(&mqttClient, config.mqtt_host, config.mqtt_port, config.security);
MQTT_InitClient(&mqttClient, config.device_id, config.mqtt_user, config.mqtt_pass, config.mqtt_keepalive, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqtt_connected_cb);
MQTT_OnDisconnected(&mqttClient, mqtt_disconnected_cb);
MQTT_OnPublished(&mqttClient, mqtt_published_cb);
MQTT_OnData(&mqttClient, mqtt_data_cb);
}
void ICACHE_FLASH_ATTR mqttstart() {
#ifdef MENJINDEBUG
os_printf("mqtt client starting....");
#endif
MQTT_InitConnection(&mqttClient, "192.168.1.1", 1883, 0);
MQTT_InitClient(&mqttClient, "esp_8266", "", "", 10, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
}
void user_init(void)
{
uart_init(BIT_RATE_230400, BIT_RATE_230400);
system_set_os_print(1); // enable/disable operating system printout
os_sprintf(topic_temp, MQTT_TOPICTEMP, system_get_chip_id());
os_sprintf(topic_hum, MQTT_TOPICHUM, system_get_chip_id());
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTCK_U, FUNC_GPIO13);
ETS_GPIO_INTR_DISABLE(); // Disable gpio interrupts
ETS_GPIO_INTR_ATTACH(interrupt_test, 4);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO4_U, FUNC_GPIO4);
gpio_output_set(0, 0, 0, GPIO_ID_PIN(4)); // Set GPIO12 as input
GPIO_REG_WRITE(GPIO_STATUS_W1TC_ADDRESS, BIT(4));
gpio_pin_intr_state_set(GPIO_ID_PIN(4), GPIO_PIN_INTR_ANYEDGE);
ETS_GPIO_INTR_ENABLE(); // Enable gpio interrupts
config_load();
DHTInit(DHT11);
MQTT_InitConnection(&mqttClient, config.mqtt_host, config.mqtt_port, config.security);
MQTT_InitClient(&mqttClient, config.device_id, config.mqtt_user, config.mqtt_pass, config.mqtt_keepalive, 1);
MQTT_InitLWT(&mqttClient, "lwt/", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqtt_connected_cb);
MQTT_OnDisconnected(&mqttClient, mqtt_disconnected_cb);
MQTT_OnPublished(&mqttClient, mqtt_published_cb);
MQTT_OnData(&mqttClient, mqtt_data_cb);
WIFI_Connect(config.sta_ssid, config.sta_pwd, wifi_connect_cb);
os_timer_disarm(&dhtTimer);
os_timer_setfn(&dhtTimer, (os_timer_func_t *)dhtCb, (void *)0);
os_timer_arm(&dhtTimer, DELAY, 1);
os_timer_disarm(&hbTimer);
os_timer_setfn(&hbTimer, (os_timer_func_t *)application_heartbeat, (void *)0);
os_timer_arm(&hbTimer, 60000, 1);
INFO("\r\nSystem started ...\r\n");
}
void ICACHE_FLASH_ATTR
user_init(void) {
pcd8544_settings.lcdVop = PCD8544_CONTRAST;
pcd8544_settings.tempCoeff = 0x04;
pcd8544_settings.biasMode = 0x14;
pcd8544_settings.inverse = false;
// you can change these values to any pin you like and have access to
pcd8544_settings.resetPin = PCD8544_RESET_PIN; //-1; This pin is now optional.
// Set it to negative value to disable.
// If you do disable it, you must tie LCD reset pin to esp reset via resistor.
pcd8544_settings.scePin = PCD8544_SCE_PIN; //-1; This pin is now optional.
// Set it to negative value to disable.
// If you do disable it, you must tie LCD CE pin to GND via resistor.
// dcPin, sdinPin and sclkPin can be used for other SPI devices if scePin is *NOT* disabled.
pcd8544_settings.dcPin = PCD8544_DC_PIN;
pcd8544_settings.sdinPin = PCD8544_SDIN_PIN;
pcd8544_settings.sclkPin = PCD8544_SCLK_PIN;
// Make uart0 work with just the TX pin. Baud:115200,n,8,1
// The RX pin is now free for GPIO use.
stdout_init();
os_delay_us(1000000); // wait a second
PCD8544_init(&pcd8544_settings);
PCD8544_initLCD(&pcd8544_settings);
CFG_Load();
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
os_timer_setfn(&lcd_timer, (os_timer_func_t*) lcdInitTask, NULL);
os_timer_arm(&lcd_timer, user_procTaskPeriod, 0);
INFO("\nSystem started ...\n");
}
void user_init(void)
{
//uart_init(BIT_RATE_115200, BIT_RATE_115200);
uart_init(BIT_RATE_9600, BIT_RATE_115200);
os_delay_us(1000000);
CFG_Load();
//MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
MQTT_InitConnection(&mqttClient, "user.jdaiot.com", 1883, 0);
//MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
MQTT_InitClient(&mqttClient, "g500001", "LASS", "LaSS2015", 120, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
//// modified for LASS
system_os_task(recvTask, recvTaskPrio, recvTaskQueue, recvTaskQueueLen);
tick=0;
refreshTime=10;
// turn off timer
os_timer_disarm(&tmr0);
//
// set the timer call back function
//
os_timer_setfn(&tmr0, tsr0, &mqttClient);
//
// turn timer on to trigger each .5 second
//
os_timer_arm(&tmr0, 5000, 1); //every 5 second
INFO("\r\nSystem started ...\r\n");
}
void ICACHE_FLASH_ATTR u_mqtt_init()
{
CFG_Load();
/*
* Original, old call with SSID and Passwd included.
* WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
*
* NOTE:- Our WiFi-Connect callback calls the MQTT_Connect function,
* which in turn will call the mqttConnectCb() function when
* communications with the MQTT servcer are established.
*/
WIFI_Connect(wifiConnectCb);
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
}
void user_init(void)
{
uart_init(BIT_RATE_115200, BIT_RATE_115200);
os_delay_us(1000000);
CFG_Load();
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
//MQTT_InitConnection(&mqttClient, "192.168.11.122", 1880, 0);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
//MQTT_InitClient(&mqttClient, "client_id", "user", "pass", 120, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
INFO("\r\nSystem started ...\r\n");
}
void user_init(void)
{
int access_point = 1;
uart_init(BIT_RATE_115200, BIT_RATE_115200);
os_delay_us(1000000);
if(access_point) {
wifi_set_opmode(STATIONAP_MODE);
} else {
gpio_init();
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_GPIO1);
gpio_output_set(0, 0, (1 << pin), 0);
CFG_Load();
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
//MQTT_InitConnection(&mqttClient, "192.168.11.122", 1880, 0);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
//MQTT_InitClient(&mqttClient, "client_id", "user", "pass", 120, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
INFO("\r\nSystem started ...\r\n");
}
}
static void on_mqtt_connected(uint32_t *args)
{
dmesg("Hello, world!");
MQTT_InitLWT(&mqtt_client, TOPIC_DMESG, "Goodbye, cruel world!", 0, 1);
MQTT_Subscribe(&mqtt_client, TOPIC_CONTROL, 0);
}