VOS_VOID MTC_IntrusionModemPowerStateChange(
MODEM_ID_ENUM_UINT16 enModemId,
MTC_MODEM_POWER_STATE_ENUM_UINT8 enPowerState
)
{
if (MTC_MODEM_POWER_OFF == enPowerState)
{
if (MODEM_ID_0 == enModemId)
{
if (MTC_MODEM_POWER_ON == MTC_GetModemPowerState(MODEM_ID_1))
{
/* 给Modem1的GAS发送启用B3指示 */
MTC_IntrusionEnableB3();
}
}
else
{
if (MTC_MODEM_POWER_ON == MTC_GetModemPowerState(MODEM_ID_0))
{
/* 给Modem0的TD<E发送启用B39指示 */
MTC_IntrusionEnableB39();
}
}
}
return;
}
VOS_VOID MTC_ProcIntrusionStrategy(VOS_VOID)
{
MTC_MODEM_POWER_STATE_ENUM_UINT8 enModem0PowerState;
MTC_MODEM_POWER_STATE_ENUM_UINT8 enModem1PowerState;
VOS_UINT32 ulLoop;
VOS_UINT32 ulLineNum;
MTC_INTRUSION_GSM_BAND_STATE_ENUM_UINT8 enGsmBandState;
MTC_INTRUSION_TL_BAND_STATE_ENUM_UINT8 enTLBandState;
MTC_CS_SERVICE_STATE_ENUM_UINT8 enCsSrvState;
FUNC_VOID pFunc = VOS_NULL_PTR;
/* 获取Modem0与Modem1的开机状态，只有在同时开机的情况下才进行裁决 */
enModem0PowerState = MTC_GetModemPowerState(MODEM_ID_0);
enModem1PowerState = MTC_GetModemPowerState(MODEM_ID_1);
if ( (MTC_MODEM_POWER_ON != enModem0PowerState)
|| (MTC_MODEM_POWER_ON != enModem1PowerState) )
{
return;
}
/* 获取本地存储的频段信息，查询裁决策略表，执行对应操作 */
ulLineNum = sizeof(g_astMtcIntrusionRulingStrategyTbl) / sizeof(MTC_INTRUSION_RULING_STRATEGY_STRU);
enGsmBandState = MTC_GetModem1GsmBandState();
enTLBandState = MTC_GetModem0TLBandState();
enCsSrvState = MTC_GetModemCsSrvExistFlg(MODEM_ID_1);
for (ulLoop = 0; ulLoop < ulLineNum; ulLoop++)
{
if (g_astMtcIntrusionRulingStrategyTbl[ulLoop].enGsmBandState != enGsmBandState)
{
continue;
}
if (g_astMtcIntrusionRulingStrategyTbl[ulLoop].enTLBandState != enTLBandState)
{
continue;
}
if (MTC_CS_SERVICE_STATE_BUTT != g_astMtcIntrusionRulingStrategyTbl[ulLoop].enCsSrvState)
{
if (enCsSrvState != g_astMtcIntrusionRulingStrategyTbl[ulLoop].enCsSrvState)
{
continue;
}
}
pFunc = g_astMtcIntrusionRulingStrategyTbl[ulLoop].pFunc;
break;
}
if (VOS_NULL_PTR != pFunc)
{
pFunc();
}
return;
}
VOS_VOID MTC_ChangeNarrowBandDcsState(
PS_BOOL_ENUM_UINT8 enEnableFlag
)
{
/* 如果与当前状态一致则直接返回 */
if (MTC_GetNarrowDcsEnalbeFlag() == enEnableFlag)
{
return;
}
/* 只有在该Modem开机时才下发裁决指示 */
if (MTC_MODEM_POWER_ON == MTC_GetModemPowerState(MODEM_ID_1))
{
/* 判断当前接入技术是否支持G模*/
if (VOS_TRUE == MTC_IsSupportRatType(MODEM_ID_1, MTC_RATMODE_GSM))
{
/* 给副卡GAS下发Narrow Band dcs 裁决 */
MTC_SndRrcBandCfgInd(I1_UEPS_PID_GAS, enEnableFlag);
}
}
/* 记录Notch标志 */
MTC_SetNarrowDcsEnalbeFlag(enEnableFlag);
return;
}
VOS_VOID MTC_SndImsaModem1InfoInd(VOS_VOID)
{
MTC_IMSA_MODEM1_INFO_IND_STRU *pstModem1Info = VOS_NULL_PTR;
/* IMSA没有Start则不需要发消息 */
if (MTC_MODEM_POWER_ON != MTC_GetModemImsaState(MODEM_ID_0))
{
return;
}
/* 申请消息包 */
pstModem1Info = (MTC_IMSA_MODEM1_INFO_IND_STRU *)MTC_ALLOC_MSG_WITH_HDR(sizeof(MTC_IMSA_MODEM1_INFO_IND_STRU));
if (VOS_NULL_PTR == pstModem1Info)
{
MTC_ERROR_LOG("MTC_SndImsaModem1InfoInd: Alloc Msg Fail!");
return;
}
/* 清空消息内容 */
PS_MEM_SET(MTC_GET_MSG_ENTITY(pstModem1Info), 0x00, MTC_GET_MSG_LENGTH(pstModem1Info));
/* 填充消息头 */
MTC_CFG_IMSA_MSG_HDR(pstModem1Info, ID_MTC_IMSA_MODEM1_INFO_IND);
/* 填写Modem1的信息 */
pstModem1Info->enPowerState = MTC_GetModemPowerState(MODEM_ID_1);
/* 发送消息 */
MTC_SEND_MSG(pstModem1Info);
return;
}
VOS_VOID MTC_ProcTlRfCtrl(CONST RRC_MTC_MS_BAND_INFO_STRU *pstSerCellBandInfo)
{
/* 副卡关机状态下直接返回 */
if (MTC_MODEM_POWER_OFF == MTC_GetModemPowerState(MODEM_ID_1))
{
return;
}
/* 存在B39频段信息, 通知DSP关闭TL射频的上行发射 */
if (MTC_BAND_CHECK64(*((VOS_UINT64 *)&(pstSerCellBandInfo->aulBandInfo[0])), MTC_BAND_MASK_B39))
{
if (PS_FALSE == MTC_GetTlRfCtrlEnalbeFlag())
{
MTC_SetTlRfCtrlEnalbeFlag(PS_TRUE);
MTC_SndI1GasRrcTdsLteRfCtrlInd(PS_TRUE);
}
}
else
{
if (PS_TRUE== MTC_GetTlRfCtrlEnalbeFlag())
{
MTC_SetTlRfCtrlEnalbeFlag(PS_FALSE);
MTC_SndI1GasRrcTdsLteRfCtrlInd(PS_FALSE);
}
}
return;
}
VOS_VOID MTC_ProcCurrCampPlmnInfoForSvlte(VOS_VOID)
{
MTC_MODEM_POWER_STATE_ENUM_UINT8 enModem1PowerState;
MTC_MODEM_NETWORK_INFO_STRU *pstModem0NetworkInfo = VOS_NULL_PTR;
MTC_PS_TRANSFER_ENUM_UINT8 enPsTransferSolution;
MTC_RATMODE_ENUM_UINT8 enModem0RateMode;
VOS_UINT8 ucUsimValidFlag;
MTC_PS_TRANSFER_CTX_STRU *pstPsTransferCtx = VOS_NULL_PTR;
pstPsTransferCtx = MTC_GetPsTransferCtxAddr();
enModem1PowerState = MTC_GetModemPowerState(MODEM_ID_1);
pstModem0NetworkInfo = MTC_GetModemNetworkInfoAddr(MODEM_ID_0);
enPsTransferSolution = MTC_GetPsTransferCfg();
enModem0RateMode = MTC_GetModemRatMode(MODEM_ID_0);
/* Modem1关机，国外模式无需PS域迁移 */
if (MTC_MODEM_POWER_OFF == enModem1PowerState)
{
return;
}
ucUsimValidFlag = MTC_GetModemUsimValidFlag(MODEM_ID_0);
/* 1、modem1处于开机状态
2、当前驻留网络接入技术为T/L(OscarTL通过主卡的G重选回T/L)
3、当前驻留网络非禁止plmn
4、单待模式modem0的ps是detach状态，上报PS域迁移指示 */
if ( ( (MTC_RATMODE_LTE == enModem0RateMode)
|| (MTC_RATMODE_TDS == enModem0RateMode) )
&& (VOS_FALSE == pstModem0NetworkInfo->ucIsForbiddenPlmnFlag)
&& (VOS_TRUE == ucUsimValidFlag)
&& (VOS_FALSE == pstModem0NetworkInfo->stPsDomainInfo.ucPsAttachAllowFlg)
&& (VOS_TRUE == pstModem0NetworkInfo->stPsDomainInfo.ucPsSupportFlg) )
{
/* PS域迁移策略脱网重选，上报网络恢复指示AT命令 */
if (MTC_PS_TRANSFER_LOST_AREA == enPsTransferSolution)
{
MTC_SndModem0MtaPsTransferInd(MTC_PS_TRANSFER_CAUSE_AREA_AVALIABLE);
MTC_SndModem0MmaPsTransferInd(MTC_PS_TRANSFER_CAUSE_AREA_AVALIABLE);
}
/* PS域迁移策略离网重选，上报网络恢复指示AT命令 */
if ((MTC_PS_TRANSFER_OFF_AREA == enPsTransferSolution)
&& (MTC_PS_TRANSFER_CAUSE_AREA_AVALIABLE == pstPsTransferCtx->enRrcCause))
{
MTC_SndModem0MtaPsTransferInd(MTC_PS_TRANSFER_CAUSE_AREA_AVALIABLE);
MTC_SndModem0MmaPsTransferInd(MTC_PS_TRANSFER_CAUSE_AREA_AVALIABLE);
}
//MTC_SndModem0MmaPsTransferInd(MTC_PS_TRANSFER_CAUSE_AREA_AVALIABLE);
}
return;
}
VOS_VOID MTC_ProcNotchStrategy(VOS_VOID)
{
MTC_MODEM_POWER_STATE_ENUM_UINT8 enModem0PowerState;
MTC_MODEM_POWER_STATE_ENUM_UINT8 enModem1PowerState;
MTC_INTRUSION_GSM_BAND_STATE_ENUM_UINT8 enGsmBandState;
MTC_INTRUSION_TL_BAND_STATE_ENUM_UINT8 enTLBandState;
PS_BOOL_ENUM_UINT8 enWithB3Flag;
PS_BOOL_ENUM_UINT8 enWithB34B39Flag;
/* 获取Modem0与Modem1的开机状态 */
enModem0PowerState = MTC_GetModemPowerState(MODEM_ID_0);
enModem1PowerState = MTC_GetModemPowerState(MODEM_ID_1);
if ( (MTC_MODEM_POWER_ON != enModem0PowerState)
|| (MTC_MODEM_POWER_ON != enModem1PowerState) )
{
/* 两个Modem未同时开机时需要复位Notch功能 */
MTC_ChangeNotchState(PS_FALSE);
return;
}
/* 两个Modem同时开机，但其中一个或两个Modem不存在任何频段，需要使能Notch */
enGsmBandState = MTC_GetModem1GsmBandState();
enTLBandState = MTC_GetModem0TLBandState();
if ( (MTC_INTRUSION_GSM_BAND_NONE == enGsmBandState)
|| (MTC_INTRUSION_TL_BAND_NONE == enTLBandState) )
{
MTC_ChangeNotchState(PS_TRUE);
return;
}
enWithB3Flag = MTC_CheckGsmWithB3(MTC_GetModemCurBandInfo(MODEM_ID_1));
enWithB34B39Flag = MTC_CheckTLWithB34B39(MTC_GetModemCurBandInfo(MODEM_ID_0));
/* GSM B3和TL B34/B39同时存在时需要使能Notch，否则复位Notch */
if (PS_TRUE == (enWithB3Flag & enWithB34B39Flag))
{
MTC_ChangeNotchState(PS_TRUE);
}
else
{
MTC_ChangeNotchState(PS_FALSE);
}
return;
}
VOS_VOID MTC_ProcNarrowDcsStrategy(VOS_VOID)
{
MTC_MODEM_POWER_STATE_ENUM_UINT8 enGModemPowerState;
#if 0
MTC_INTRUSION_GSM_BAND_STATE_ENUM_UINT8 enGsmBandState;
PS_BOOL_ENUM_UINT8 enWithB31Flag;
PS_BOOL_ENUM_UINT8 enWithB32Flag;
#endif
enGModemPowerState = MTC_GetModemPowerState(MODEM_ID_1);
/* G modem未开机时 */
if (MTC_MODEM_POWER_ON != enGModemPowerState)
{
/* 去使能Narrow band dcs */
MTC_ChangeNarrowBandDcsState(PS_FALSE);
return;
}
else
{
MTC_ChangeNarrowBandDcsState(PS_TRUE);
return;
}
#if 0
/* 获取G modem的频段状态 */
enGsmBandState = MTC_GetModem1GsmBandState();
/* 不存在任何频段 */
if (MTC_INTRUSION_GSM_BAND_NONE == enGsmBandState)
{
/* 去使能Narrow band dcs */
MTC_ChangeNarrowBandDcsState(PS_FALSE);
return;
}
/* 1. 仅存在频段B31，需要Narrow Band Dcs
2. 存在频段B31以及其他频段，需要Narrow Band Dcs
*/
enWithB31Flag = MTC_CheckGsmWithB31(MTC_GetModemCurBandInfo(MODEM_ID_1));
enWithB32Flag = MTC_CheckGsmWithB32(MTC_GetModemCurBandInfo(MODEM_ID_1));
/* 存在B31且不存在B32的场景下，需要Narrow Band Dcs */
if ((PS_TRUE == enWithB31Flag)
&& (PS_FALSE == enWithB32Flag))
{
/* 使能Narrow band dcs */
MTC_ChangeNarrowBandDcsState(PS_TRUE);
}
else
{
/* 去使能Narrow band dcs */
MTC_ChangeNarrowBandDcsState(PS_FALSE);
}
return;
#endif
}
VOS_VOID MTC_ChangeNotchState(
PS_BOOL_ENUM_UINT8 enEnableFlag
)
{
/* 如果与当前状态一致则直接返回 */
if (MTC_GetNotchEnalbeFlag() == enEnableFlag)
{
return;
}
/* 只有在该Modem开机时才下发裁决指示 */
if (MTC_MODEM_POWER_ON == MTC_GetModemPowerState(MODEM_ID_1))
{
/* 给副卡GAS下发NOTCH裁决 */
MTC_SndRrcNotchChannelInd(I1_UEPS_PID_GAS, enEnableFlag);
}
if (MTC_MODEM_POWER_ON == MTC_GetModemPowerState(MODEM_ID_0))
{
#if (FEATURE_ON == FEATURE_UE_MODE_TDS)
/* 判断当前接入技术是否支持TDS */
if (VOS_TRUE == MTC_IsSupportRatType(MODEM_ID_0, MTC_RATMODE_TDS))
{
/* 如果支持TDS模式，给主卡TDS RRC下发NOTCH裁决 */
MTC_SndRrcNotchChannelInd(TPS_PID_RRC, enEnableFlag);
}
#endif
#if (FEATURE_ON == FEATURE_LTE)
/* 判断当前接入技术是否支持LTE */
if (VOS_TRUE == MTC_IsSupportRatType(MODEM_ID_0, MTC_RATMODE_LTE))
{
/* 如果支持LTE模式，给主卡LTE RRC下发NOTCH裁决 */
MTC_SndRrcNotchChannelInd(PS_PID_ERRC, enEnableFlag);
}
#endif
}
/* 记录Notch标志 */
MTC_SetNotchEnalbeFlag(enEnableFlag);
return;
}
VOS_VOID MTC_SndRrcIntrusionBandSetReq(
VOS_UINT32 ulRecvPid,
RRC_MTC_MS_BAND_INFO_STRU *pstForbiddenBandInfo
)
{
VOS_UINT16 ulLenth;
MODEM_ID_ENUM_UINT16 enModemId;
MTC_RRC_INTRUSION_BAND_SET_REQ_STRU *pstBandSetReq = VOS_NULL_PTR;
enModemId = VOS_GetModemIDFromPid(ulRecvPid);
if (enModemId >= MODEM_ID_BUTT)
{
return;
}
/* 如果当前已经关机，则停止发送信息 */
if (MTC_MODEM_POWER_OFF == MTC_GetModemPowerState(enModemId))
{
return;
}
/* 分配消息空间 */
ulLenth = sizeof(MTC_RRC_INTRUSION_BAND_SET_REQ_STRU);
pstBandSetReq = (MTC_RRC_INTRUSION_BAND_SET_REQ_STRU *)PS_ALLOC_MSG_WITH_HEADER_LEN(
UEPS_PID_MTC,
ulLenth);
if (VOS_NULL_PTR == pstBandSetReq)
{
MTC_ERROR_LOG("MTC_SndRrcIntrusionActionSetReq: Alloc Msg Fail!");
return;
}
/* 填充消息 */
pstBandSetReq->stMsgHeader.ulReceiverPid = ulRecvPid;
pstBandSetReq->stMsgHeader.ulMsgName = ID_MTC_RRC_INTRUSION_BAND_SET_REQ;
PS_MEM_CPY(&pstBandSetReq->stForbiddenBandInfo,
pstForbiddenBandInfo,
sizeof(RRC_MTC_MS_BAND_INFO_STRU));
/* 发送消息 */
if (VOS_OK != PS_SEND_MSG(UEPS_PID_MTC, pstBandSetReq))
{
MTC_ERROR1_LOG("MTC_SndRrcIntrusionActionSetReq: Snd Msg Err. ReceiverPid: ", ulRecvPid);
return;
}
/* 记录可维可测 */
MTC_DEBUG_IntrusionSendSetBandReq(ulRecvPid);
return;
}
VOS_VOID MTC_RcvGsmCellInfoInd(VOS_VOID *pMsg)
{
RRC_MTC_GSM_CELL_INFO_IND_STRU *pstGsmInfoInd = VOS_NULL_PTR;
MTC_RRC_GSM_CELL_INFO_IND_STRU *pstGsmCellInfo = VOS_NULL_PTR;
VOS_UINT32 ulReceiverPid;
/* 如果当前已经关机，则停止发送信息 */
if (MTC_MODEM_POWER_OFF == MTC_GetModemPowerState(MODEM_ID_0))
{
return;
}
/* 判断当前主模状态, 为TDS/LTE时发送 */
if (MTC_RATMODE_TDS == MTC_GetModemRatMode(MODEM_ID_0))
{
ulReceiverPid = TPS_PID_RRC;
}
else if (MTC_RATMODE_LTE== MTC_GetModemRatMode(MODEM_ID_0))
{
ulReceiverPid = PS_PID_ERRC;
}
else
{
return;
}
/* 分配消息空间 */
pstGsmCellInfo = (MTC_RRC_GSM_CELL_INFO_IND_STRU *)PS_ALLOC_MSG_WITH_HEADER_LEN(
UEPS_PID_MTC,
sizeof(MTC_RRC_GSM_CELL_INFO_IND_STRU));
if (VOS_NULL_PTR == pstGsmCellInfo)
{
MTC_ERROR_LOG("MTC_RcvGsmCellInfoInd: Alloc Msg Fail!");
return;
}
pstGsmCellInfo->stMsgHeader.ulReceiverPid = ulReceiverPid;
pstGsmCellInfo->stMsgHeader.ulMsgName = ID_MTC_RRC_GSM_CELL_INFO_IND;
pstGsmInfoInd = (RRC_MTC_GSM_CELL_INFO_IND_STRU *)pMsg;
PS_MEM_CPY(&pstGsmCellInfo->stGsmCellInfo,
&pstGsmInfoInd->stGsmCellInfo,
sizeof(RRC_MTC_GSM_CELL_INFO_STRU));
/* 发送消息 */
if (VOS_OK != PS_SEND_MSG(UEPS_PID_MTC, pstGsmCellInfo))
{
MTC_ERROR_LOG("MTC_RcvGsmCellInfoInd: Snd Msg Err!");
}
return;
}
VOS_VOID MTC_ProcRseStrategy(VOS_VOID)
{
PS_BOOL_ENUM_UINT8 enRseOnFlag;
MTC_MODEM_POWER_STATE_ENUM_UINT8 enModem0PowerState;
MTC_MODEM_POWER_STATE_ENUM_UINT8 enModem1PowerState;
/* 判断当前是否支持RSE功能 */
if (MTC_CFG_DISABLE == MTC_GetRseSupportCfg())
{
return;
}
/* 判断是否是测试卡 */
if (VOS_FALSE == USIMM_IsTestCard_Instance(MODEM_ID_1))
{
return;
}
/* 初始化 */
enRseOnFlag = PS_FALSE;
enModem0PowerState = MTC_GetModemPowerState(MODEM_ID_0);
enModem1PowerState = MTC_GetModemPowerState(MODEM_ID_1);
/* 若modem0关机 modem1开机，则需要RSE ON */
if ((MTC_MODEM_POWER_OFF == enModem0PowerState )
&&(MTC_MODEM_POWER_ON == enModem1PowerState))
{
enRseOnFlag = PS_TRUE;
}
/* 若与之前的值相同，则不再下发消息 */
if (enRseOnFlag == MTC_GetRseCfgValue())
{
return ;
}
/* 给modem1发送RSE配置消息 */
MTC_SndRrcRseCfgInd(I1_UEPS_PID_GAS, enRseOnFlag);
}
VOS_VOID MTC_SndRcmModemStateInd(VOS_VOID)
{
MTC_RCM_MODEM_STATE_NOTIFY_STRU *pstModemState;
MODEM_ID_ENUM_UINT16 enModemId;
/* 申请消息包 */
pstModemState = (MTC_RCM_MODEM_STATE_NOTIFY_STRU *)MTC_ALLOC_MSG_WITH_HDR(sizeof(MTC_RCM_MODEM_STATE_NOTIFY_STRU));
if (VOS_NULL_PTR == pstModemState)
{
MTC_ERROR_LOG("MTC_SndRcmModemStateInd: Alloc Msg Fail!");
return;
}
PS_MEM_SET(((VOS_UINT8*)pstModemState) + VOS_MSG_HEAD_LENGTH, 0, sizeof(MTC_RCM_MODEM_STATE_NOTIFY_STRU) - VOS_MSG_HEAD_LENGTH);
/* 填充消息头 */
MTC_CFG_RCM_MSG_HDR(&pstModemState->stMsgHeader, ID_MTC_RCM_MODEM_STATUS_NOTIFY);
/* 填写modem0和modem1的状态信息 */
for (enModemId = 0; enModemId < MODEM_ID_BUTT ; enModemId++)
{
pstModemState->astModemState[enModemId].enCsSrvConnState = MTC_GetCsConnStateInfo(enModemId);
pstModemState->astModemState[enModemId].enPsSrvConnState = MTC_GetRcmPsConnStateInfo(enModemId);
pstModemState->astModemState[enModemId].enModemPowerState = MTC_GetModemPowerState(enModemId);
pstModemState->astModemState[enModemId].enUsimmCardState = MTC_GetUsimmStateInfo(enModemId);
pstModemState->astModemState[enModemId].enModemType = MTC_RCM_MODEM_0 + enModemId;
}
/* 填写CDMA状态信息 */
pstModemState->astModemState[MTC_RCM_MODEM_CDMA].enCsSrvConnState = MTC_GetOutSideCsConnStateInfo(MTC_OUTSIDE_MODEM_CDMA);
pstModemState->astModemState[MTC_RCM_MODEM_CDMA].enPsSrvConnState = MTC_GetOutSidePsConnStateInfo(MTC_OUTSIDE_MODEM_CDMA);
pstModemState->astModemState[MTC_RCM_MODEM_CDMA].enModemPowerState = MTC_GetOutSideModemPowerState(MTC_OUTSIDE_MODEM_CDMA);
pstModemState->astModemState[MTC_RCM_MODEM_CDMA].enUsimmCardState = MTC_GetOutSideModemUsimmState(MTC_OUTSIDE_MODEM_CDMA);
pstModemState->astModemState[MTC_RCM_MODEM_CDMA].enModemType = MTC_RCM_MODEM_CDMA;
/* 发送消息 */
MTC_SEND_MSG(pstModemState);
return;
}
PS_BOOL_ENUM_UINT8 MTC_ProcB39B32IntrusionStrategy(VOS_VOID)
{
RRC_MTC_MS_BAND_INFO_STRU *pstSerCellBandInfo = VOS_NULL_PTR;
VOS_UINT32 ulB39Ret;
MTC_MODEM_POWER_STATE_ENUM_UINT8 enModem1PowerState;
TAF_MTC_SRV_CONN_STATE_ENUM_UINT8 enModem0PsState;
TAF_MTC_SRV_CONN_STATE_ENUM_UINT8 enModem1PsState;
TAF_MTC_SRV_CONN_STATE_ENUM_UINT8 enModem1CsState;
TAF_MTC_SRV_CONN_STATE_ENUM_UINT8 enModem0CsState;
/* 初始化 */
enModem0PsState = TAF_MTC_SRV_CONN_STATE_BUTT;
enModem0CsState = TAF_MTC_SRV_CONN_STATE_BUTT;
enModem1PsState = TAF_MTC_SRV_CONN_STATE_BUTT;
enModem1CsState = TAF_MTC_SRV_CONN_STATE_BUTT;
ulB39Ret = PS_FALSE;
enModem1PowerState = MTC_MODEM_POWER_STATE_BUTT;
/* 判断modem1是否开机 */
enModem1PowerState = MTC_GetModemPowerState(MODEM_ID_1);
if (MTC_MODEM_POWER_OFF == enModem1PowerState)
{
/* 打孔方案不生效 */
return PS_FALSE;
}
/* 判断主卡是否存在B39 */
pstSerCellBandInfo = MTC_GetModemSerCellBandInfo(MODEM_ID_0);
ulB39Ret = MTC_BAND_CHECK64(*((VOS_UINT64 *)&(pstSerCellBandInfo->aulBandInfo[0])), MTC_BAND_MASK_B39);
if (VOS_FALSE == ulB39Ret)
{
/* 打孔方案不生效 */
return PS_FALSE;
}
/* 判断主副卡的业务状态 */
enModem0PsState = MTC_GetPsConnStateInfo(MODEM_ID_0);
enModem0CsState = MTC_GetCsConnStateInfo(MODEM_ID_0);
enModem1PsState = MTC_GetPsConnStateInfo(MODEM_ID_1);
enModem1CsState = MTC_GetCsConnStateInfo(MODEM_ID_1);
/* 主卡存在CS,则打孔方案不生效 */
if (TAF_MTC_SRV_EXIST == enModem0CsState)
{
return PS_FALSE;
}
/* 副卡CS, 则打孔方案生效 */
if (TAF_MTC_SRV_EXIST == enModem1CsState)
{
return PS_TRUE;
}
/* 主卡PS,副卡IDLE, 则打孔方案生效 */
if ( (TAF_MTC_SRV_EXIST == enModem0PsState)
&& ( (TAF_MTC_SRV_EXIST != enModem1CsState)
&& (TAF_MTC_SRV_EXIST != enModem1PsState) ) )
{
return PS_TRUE;
}
/* 其它情况打孔方案不生效 */
return PS_FALSE;
}
VOS_VOID MTC_RcvRrcAreaLostInd(VOS_VOID * pMsg)
{
MODEM_ID_ENUM_UINT16 enModemId;
RRC_MTC_AREA_LOST_IND_STRU *pstAreaLostInd = VOS_NULL_PTR;
MTC_MODEM_POWER_STATE_ENUM_UINT8 enModem1PowerState;
MTC_OPERATOR_CUST_SOLUTION_ENUM_UINT8 enOperatorCustSolution;
VOS_BOOL enTestCardFlg;
MTC_PS_TRANSFER_CTX_STRU *pstPsTransferCtx = VOS_NULL_PTR;
pstPsTransferCtx = MTC_GetPsTransferCtxAddr();
/* GCF测试时不需要启动PSTRANSFER流程，否则导致GCF测试部不通过 */
enTestCardFlg = USIMM_IsTestCard();
if (VOS_TRUE == enTestCardFlg)
{
return;
}
pstAreaLostInd = (RRC_MTC_AREA_LOST_IND_STRU*)pMsg;
enModemId = VOS_GetModemIDFromPid(pstAreaLostInd->stMsgHeader.ulSenderPid);
/* 仅处理Modem0发送的丢网指示 */
if (enModemId != MODEM_ID_0)
{
MTC_ERROR1_LOG("MTC_RcvRrcAreaLostInd: Err ModemId ", enModemId);
return;
}
/* 未开启PS域迁移策略，只记录次数 */
if (MTC_PS_TRANSFER_NONE == MTC_GetPsTransferCfg())
{
/* 可维可测: 记录接收到丢网指示的次数 */
MTC_DEBUG_RcvRrcAreaLostInd(pstAreaLostInd->stMsgHeader.ulSenderPid);
return;
}
/* 运营商定制方案SVLTE或C+L时需要上报AT丢网指示 */
enOperatorCustSolution = MTC_GetOperatorCustSolution();
enModem1PowerState = MTC_GetModemPowerState(MODEM_ID_1);
/* 当接入层在业务态或idle态丢网且Modem1开机且卡有效时，上报PS域迁移指示 */
if ((VOS_TRUE == MTC_GetModemUsimValidFlag(enModemId))
&& (((MTC_OPERATOR_CUST_CMCC_SVLTE == enOperatorCustSolution)
&& (MTC_MODEM_POWER_ON == enModem1PowerState))
|| (MTC_OPERATOR_CUST_CT_LC == enOperatorCustSolution) ))
{
if (MTC_PS_TRANSFER_CAUSE_AREA_LOST != pstPsTransferCtx->enReportCause)
{
MTC_SndModem0MtaPsTransferInd(MTC_PS_TRANSFER_CAUSE_AREA_LOST);
/* 通知modem0 gmm丢网，gmm记录全局变量后续detach只做一次减少detach时间 */
MTC_SndModem0GmmRrcAreaLostInd();
}
}
pstPsTransferCtx->enRrcCause = MTC_PS_TRANSFER_CAUSE_AREA_LOST;
/* 可维可测: 记录接收到丢网指示的次数 */
MTC_DEBUG_RcvRrcAreaLostInd(pstAreaLostInd->stMsgHeader.ulSenderPid);
return;
}
VOS_VOID MTC_DEBUG_TraceAllModemConnStateInfo(VOS_VOID)
{
MTC_DEBUG_ALL_MODEM_STATE_INFO stAllModemState;
MODEM_ID_ENUM_UINT16 enModemID;
TAF_MTC_SRV_CONN_STATE_ENUM_UINT8 enCsSrvStatus;
TAF_MTC_SRV_CONN_STATE_ENUM_UINT8 enPsSrvStatus;
enPsSrvStatus = TAF_MTC_SRV_CONN_STATE_BUTT;
/* 初始化 */
PS_MEM_SET(&stAllModemState, 0x0, sizeof(MTC_DEBUG_ALL_MODEM_STATE_INFO));
/* 填写消息头 */
MTC_DEBUG_CFG_MSG_HDR(&stAllModemState.stMsgHeader,
UEPS_PID_MTC, UEPS_PID_MTC,
sizeof(MTC_DEBUG_ALL_MODEM_STATE_INFO) - VOS_MSG_HEAD_LENGTH);
stAllModemState.stMsgHeader.ulMsgName = ID_DEBUG_MTC_ALL_MODEM_STATE_INFO;
/* 各Modem状态信息 */
for (enModemID = 0; enModemID < MODEM_ID_BUTT; enModemID++)
{
stAllModemState.stModemStateInfo[enModemID].enPowerState = MTC_GetModemPowerState(enModemID);
stAllModemState.stModemStateInfo[enModemID].ulCsSessionValue = MTC_GetCsSessionInfo(enModemID);
stAllModemState.stModemStateInfo[enModemID].ulPsSessionValue = MTC_GetPsSessionInfo(enModemID);
stAllModemState.stModemStateInfo[enModemID].ucPsConnInfo = MTC_GetPsTypeInfo(enModemID);
enPsSrvStatus = MTC_GetPsSrvState(enModemID);
if ((PS_TRUE == MTC_IsPsSessionInfoExit(enModemID))
|| (TAF_MTC_SRV_EXIST == enPsSrvStatus))
{
stAllModemState.stModemStateInfo[enModemID].enIsPsSrvConnExist = TAF_MTC_SRV_EXIST;
}
else
{
stAllModemState.stModemStateInfo[enModemID].enIsPsSrvConnExist = TAF_MTC_SRV_NO_EXIST;
}
stAllModemState.stModemStateInfo[enModemID].ucCsConnInfo = MTC_GetCsTypeInfo(enModemID);
enCsSrvStatus = MTC_GetCsSrvState(enModemID);
stAllModemState.stModemStateInfo[enModemID].enModemRatCfg = MTC_ConvertToRcmRatCfg(MTC_GetUsimStateInfo(enModemID),
MTC_GetRatCfgByModemId(enModemID));
#if (FEATURE_ON == FEATURE_UE_MODE_CDMA)
if ((MTC_RCM_MODEM_RAT_CFG_CL == stAllModemState.stModemStateInfo[enModemID].enModemRatCfg)
|| (MTC_RCM_MODEM_RAT_CFG_C == stAllModemState.stModemStateInfo[enModemID].enModemRatCfg))
{
stAllModemState.stModemStateInfo[enModemID].enUsimmState = MTC_GetCsimStateInfo(enModemID);
}
else
#endif
{
stAllModemState.stModemStateInfo[enModemID].enUsimmState = MTC_GetUsimStateInfo(enModemID);
}
if ( (PS_TRUE == MTC_IsCsSessionInfoExit(enModemID))
|| (TAF_MTC_SRV_EXIST == enCsSrvStatus) )
{
stAllModemState.stModemStateInfo[enModemID].enIsCsSrvConnExist = TAF_MTC_SRV_EXIST;
}
else
{
stAllModemState.stModemStateInfo[enModemID].enIsCsSrvConnExist = TAF_MTC_SRV_NO_EXIST;
}
}
/* 外置modem状态信息 */
stAllModemState.stModemStateInfo[MTC_RCM_MODEM_OTHER].enIsCsSrvConnExist = MTC_GetOutSideCsConnStateInfo(MTC_OUTSIDE_MODEM_CDMA);
stAllModemState.stModemStateInfo[MTC_RCM_MODEM_OTHER].enIsPsSrvConnExist = MTC_GetOutSidePsConnStateInfo(MTC_OUTSIDE_MODEM_CDMA);
stAllModemState.stModemStateInfo[MTC_RCM_MODEM_OTHER].enPowerState = MTC_GetOutSideModemPowerState(MTC_OUTSIDE_MODEM_CDMA);
stAllModemState.stModemStateInfo[MTC_RCM_MODEM_OTHER].enUsimmState = MTC_GetOutSideModemUsimmState(MTC_OUTSIDE_MODEM_CDMA);
stAllModemState.stModemStateInfo[MTC_RCM_MODEM_OTHER].enModemRatCfg = MTC_RCM_MODEM_RAT_CFG_C;
/* 发送消息 */
MTC_DEBUG_TraceEvent(&stAllModemState);
return;
}
