unsigned char * GetLanguagecodeFromFile(const char *FileName)
{
FILE *fp;
struct tagFontLibHeader fileHeader;
u32 FileLength;
unsigned char *LanguageCode=NULL;
fp=fopen(FileName,"rb");
if(fp==NULL)
{
printf("open the file failed!\n");
goto exit;
}
fseek(fp,0L,SEEK_SET);
fread(&fileHeader,sizeof(struct tagFontLibHeader),1,fp);
if((fileHeader.magic[0] != 'U' && fileHeader.magic[0] != 'M'))
{
printf("Cann't support file format!\n");
return 0;
}
if('M' == fileHeader.magic[0]) //mbcs 编码
{
printf("This is the Mbcs code!\n");
}
else
{
printf("This is the Unicode code!\n");
}
//对fileHeader的数据的顺序进行调整
// AdjustProcedure( &fileHeader.Size, &fileHeader.Size, sizeof(fileHeader.Size));
// AdjustProcedure( &fileHeader.wCpFlag, &fileHeader.wCpFlag, sizeof(fileHeader.wCpFlag));
printf("filesize=%08x\n",fileHeader.Size);
printf("LanguageF=%04x\n",fileHeader.wCpFlag);
LanguageCode=M_MallocLc(fileHeader.Size,0);
if(NULL==LanguageCode)
{
fclose(fp);
goto exit;
}
fseek(fp,0L,SEEK_SET);
FileLength=fread(LanguageCode,fileHeader.Size,sizeof(unsigned char),fp);
printf("---File--Length=%08x\n",FileLength);
// memcpy(&fileHeader,LanguageCode,0x10);
fclose(fp);
exit:
return LanguageCode;
}
static void rfbProcessClientNormalMessage(rfbClientPtr cl)
{
int n=0;
rfbClientToServerMsg msg;
char *str;
int i;
// unsigned char keyvalue;
u32 enc;
// debug_printf("--In the NormalMessadge process!\n");
if ((n = ReadExact(cl, (char *)&msg, 1)) <= 0)
{
debug_printf("rfbProcessClientNormalMessage: read--type-error,shutdown clien!\n");
// delay(10);
rfbCloseClient(cl);
return;
}
// debug_printf("--In the NormalMessadge process!--has read msg type=%d \n",msg.type);
switch (msg.type) //根据收到的消息来对应的处理各种情况
{
case rfbSetPixelFormat://目前已经处理完备
debug_printf("SetPixelFormat!\n");
if ((n = ReadExact(cl, ((char *)&msg) + 1,
sz_rfbSetPixelFormatMsg - 1)) <= 0)
{
debug_printf("rfbProcessClientNormalMessage: read--setpixelmessage-error,shutdown client!\n");
// delay(10000);
rfbCloseClient(cl);
return;
}
cl->format.bitsPerPixel = msg.spf.format.bitsPerPixel;
cl->format.depth = msg.spf.format.depth;
cl->format.bigEndian = (msg.spf.format.bigEndian ? 1 : 0);
cl->format.trueColour = (msg.spf.format.trueColour ? 1 : 0);
cl->format.redMax = Swap16IfLE(msg.spf.format.redMax);
cl->format.greenMax = Swap16IfLE(msg.spf.format.greenMax);
cl->format.blueMax = Swap16IfLE(msg.spf.format.blueMax);
cl->format.redShift = msg.spf.format.redShift;
cl->format.greenShift = msg.spf.format.greenShift;
cl->format.blueShift = msg.spf.format.blueShift;
cl->readyForSetColourMapEntries = TRUE;
//这个是必须要处理的，因为当客户端发送的信息是颜色不是真彩色的话，必须要发送服务器的映射方法。
debug_printf("got the client set pixformat=%s\n",cl->host);
showPixelFormat(&(cl->format));
// deug_printf("--set the client color translate begin!\n");
rfbSetTranslateFunction(cl);
// debug_printf("--set the client color end!\n");
return;
case rfbFixColourMapEntries:
debug_printf("rfbFixColourMapEntries!\n");
if ((n = ReadExact(cl, ((char *)&msg) + 1,
sz_rfbFixColourMapEntriesMsg - 1)) <= 0) {
debug_printf("rfbProcessClientNormalMessage: read--fixpixelmessage-error,shutdown client!\n");
delay(10000);
rfbCloseClient(cl);
return;
}
debug_printf("FixColourMapEntries unsupported\n");
rfbCloseClient(cl);
return;
case rfbSetEncodings://目前已经处理完备
{
//debug_printf("rfbSetEncodings!\n");
if ((n = ReadExact(cl, ((char *)&msg) + 1,
sz_rfbSetEncodingsMsg - 1)) <= 0) {
debug_printf("rfbProcessClientNormalMessage: read--rfbSetEncodings-error,shutdown client!\n");
delay(10000);
rfbCloseClient(cl);
return;
}
msg.se.nEncodings = Swap16IfLE(msg.se.nEncodings);
cl->preferredEncoding = -1;
cl->useCopyRect = FALSE;
cl->enableCursorShapeUpdates = FALSE;
cl->enableLastRectEncoding = FALSE;
for (i = 0; i < msg.se.nEncodings; i++) {
if ((n = ReadExact(cl, (char *)&enc, 4)) <= 0) {
debug_printf("rfbProcessClientNormalMessage: read--rfbSetEncodings-error,shutdown client!\n");
delay(10000);
rfbCloseClient(cl);
return;
}
enc = Swap32IfLE(enc);
switch (enc) {
case rfbEncodingCopyRect:
debug_printf("client %s supported rfbEncodingCopyRect\n",cl->host);
cl->useCopyRect = TRUE;
break;
case rfbEncodingRaw:
debug_printf("client %s supported rfbEncodingRaw\n",cl->host);
if (cl->preferredEncoding == -1) {
cl->preferredEncoding = enc;
debug_printf("Using raw encoding for client %s\n",
cl->host);
}
break;
case rfbEncodingRRE:
debug_printf("client %s supported rfbEncodingRRE\n",cl->host);
if (cl->preferredEncoding == -1) {
cl->preferredEncoding = enc;
debug_printf("Using rre encoding for client %s\n",
cl->host);
}
break;
case rfbEncodingCoRRE:
debug_printf("client %s supported rfbEncodingCoRRE\n",cl->host);
if (cl->preferredEncoding == -1) {
cl->preferredEncoding = enc;
debug_printf("Using CoRRE encoding for client %s\n",
cl->host);
}
break;
case rfbEncodingHextile:
debug_printf("client %s supported rfbEncodingHextile\n",cl->host);
if (cl->preferredEncoding == -1) {
cl->preferredEncoding = enc;
debug_printf("Using hextile encoding for client %s\n",
cl->host);
}
break;
case rfbEncodingZlib:
debug_printf("client %s supported rfbEncodingZlib\n",cl->host);
if (cl->preferredEncoding == -1) {
cl->preferredEncoding = enc;
debug_printf("Using zlib encoding for client %s\n",
cl->host);
}
break;
case rfbEncodingTight:
debug_printf("client %s supported rfbEncodingHextile\n",cl->host);
if (cl->preferredEncoding == -1) {
cl->preferredEncoding = enc;
debug_printf("Using tight encoding for client %s\n",
cl->host);
}
break;
case rfbEncodingXCursor:
debug_printf("Enabling X-style cursor updates for client %s\n",
cl->host);
cl->enableCursorShapeUpdates = TRUE;
cl->useRichCursorEncoding = FALSE;
cl->cursorWasChanged = TRUE;
break;
case rfbEncodingRichCursor:
if (!cl->enableCursorShapeUpdates) {
debug_printf("Enabling full-color cursor updates for client "
"%s\n", cl->host);
cl->enableCursorShapeUpdates = TRUE;
cl->useRichCursorEncoding = TRUE;
cl->cursorWasChanged = TRUE;
}
break;
case rfbEncodingLastRect:
debug_printf("client %s supported rfbEncodingLastRect\n",cl->host);
if (!cl->enableLastRectEncoding) {
debug_printf("Enabling LastRect protocol extension for client "
"%s\n", cl->host);
cl->enableLastRectEncoding = TRUE;
}
break;
default:
if ( enc >= (u32)rfbEncodingCompressLevel0 &&
enc <= (u32)rfbEncodingCompressLevel9 ) {
cl->zlibCompressLevel = enc & 0x0F;
cl->tightCompressLevel = enc & 0x0F;
debug_printf("Using compression level %d for client %s\n",
cl->tightCompressLevel, cl->host);
} else if ( enc >= (u32)rfbEncodingQualityLevel0 &&
enc <= (u32)rfbEncodingQualityLevel9 ) {
cl->tightQualityLevel = enc & 0x0F;
debug_printf("Using image quality level %d for client %s\n",
cl->tightQualityLevel, cl->host);
} else
debug_printf("rfbProcessClientNormalMessage: ignoring unknown "
"encoding type %d\n", (int)enc);
}
}
if (cl->preferredEncoding == -1) {
cl->preferredEncoding = rfbEncodingRaw;
}
return;
}
case rfbFramebufferUpdateRequest:
{
//debug_printf("rfbSetEncodings!\n");
if ((n = ReadExact(cl, ((char *)&msg) + 1,
sz_rfbFramebufferUpdateRequestMsg-1)) <= 0) {
if (n != 0)
debug_printf("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
if(msg.fur.incremental==FALSE)//客户端请求整幅数据，出现了某些数据的丢失
{
cl->InitDone=FALSE;
cl->modifiedregion.x=Swap16IfLE(msg.fur.x);
cl->modifiedregion.y=Swap16IfLE(msg.fur.y);
cl->modifiedregion.w=Swap16IfLE(msg.fur.w);
cl->modifiedregion.h=Swap16IfLE(msg.fur.h);
}
else
{
cl->InitDone=TRUE;
}
if (!cl->readyForSetColourMapEntries) {
/* client hasn't sent a SetPixelFormat so is using server's */
cl->readyForSetColourMapEntries = TRUE;
if (!cl->format.trueColour) {
if (!rfbSendSetColourMapEntries(cl, 0, 256)) {
// sraRgnDestroy(tmpRegion);
// TSIGNAL(cl->updateCond);
// UNLOCK(cl->updateMutex);
debug_printf("failed to send the color map!");
return;
}
}
}
cl->HasRequest = 1;
return;
}
case rfbKeyEvent:
debug_printf("rfbKeyEvent!\n");
cl->rfbKeyEventsRcvd++;
if ((n = ReadExact(cl, ((char *)&msg) + 1,
sz_rfbKeyEventMsg - 1)) <= 0) {
if (n != 0)
debug_printf("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
//打印接受到的键盘值
msg.ke.key=Swap32IfLE(msg.ke.key);
#if CN_CFG_KEYBOARD == 1
vncclient_keyevent(cl->screen, msg);
#endif
return;
case rfbPointerEvent:
cl->rfbPointerEventsRcvd++;
if ((n = ReadExact(cl, ((char *)&msg) + 1,
sz_rfbPointerEventMsg - 1)) <= 0)
{
if (n != 0)//等于0应该是客户端主动关闭了
debug_printf("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
//输入touch message
msg.pe.x = Swap16IfLE(msg.pe.x);
msg.pe.y = Swap16IfLE(msg.pe.y);
// debug_printf("rfbPointerEvent!----x=%d y=%d\n", msg.pe.x,msg.pe.y);
#if CN_CFG_KEYBOARD == 1
vncclient_pointevent(cl->screen, msg);
#endif
return;
case rfbClientCutText:
debug_printf("rfbClientCutText!\n");
if ((n = ReadExact(cl, ((char *)&msg) + 1,
sz_rfbClientCutTextMsg - 1)) <= 0) {
if (n != 0)
debug_printf("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
msg.cct.length = Swap32IfLE(msg.cct.length);
str = (char *)M_MallocLc(msg.cct.length+1, 0);
if ((n = ReadExact(cl, str, msg.cct.length)) <= 0) {
if (n != 0)
debug_printf("rfbProcessClientNormalMessage: read");
free(str);
rfbCloseClient(cl);
return;
}
// cl->screen->setXCutText(str, msg.cct.length, cl);
str[msg.cct.length]= 0;
debug_printf(" the cut messaged=%s\n",str);
free(str);
return;
default:
debug_printf("rfbProcessClientNormalMessage: unknown message type %d\n",
msg.type);
debug_printf(" ... closing connection\n");
rfbCloseClient(cl);
return;
}
}
//----从掉电恢复块恢复数据-----------------------------------------------------
//功能: 从掉电恢复块恢复数据，如果掉电恢复块里有有效数据，比较其与目标块的数据是
// 否一致，如果不一致则用掉电恢复块的数据覆盖目标块。无论是否需要恢复，最后
// 均擦除掉电恢复块。
//参数: PCRB_block,掉电恢复块块号，芯片的绝对块号
// restored，本指针返回被恢复的目标块
//返回: true = 无需恢复或者正确恢复，false = 发生错误，一般是因为目标块是坏块。
//-----------------------------------------------------------------------------
bool_t restore_PCRB_nand(u32 PCRB_block,u32 *restored)
{
u32 verify;
u32 address;
u32 loop;
u32 protected_block;
u32 sector_from,sector_to;
u8 *sector_buf; //扇区缓冲区，动态分配，不在栈中分配
bool_t result = true;
if(PCRB_block >= tg_samsung_nand.block_sum)
return false;
//第一页的最后4字节保存受保护的目标块号。
address =tg_samsung_nand.block_size*PCRB_block + 12;
ce_active(); //激活片选
__write_command_nand(cn_nand_select_oob); //操作oob页
__write_address_nand(address);
__wait_ready_nand( ); //等待芯片内部操作完成
//受保护的目标块号写入flash，注意:没有做ECC校验，以后补上---db
protected_block = *pg_nand_data;
protected_block += (u32)(*pg_nand_data)<<8;
protected_block += (u32)(*pg_nand_data)<<16;
protected_block += (u32)(*pg_nand_data)<<24;
*restored = protected_block;
ce_inactive();
if(protected_block > tg_samsung_nand.block_sum)
{
erase_block_nand(PCRB_block);
return true;
}
sector_buf = M_MallocLc(u32g_sector_size,0);
if(sector_buf == NULL)
return false;
erase_block_nand(protected_block);
sector_from = PCRB_block * u32g_sectors_per_block;
sector_to = protected_block * u32g_sectors_per_block;
for(loop = 0; loop < u32g_sectors_per_block; loop++)
{
verify = __read_sector_nand_with_ecc(
sector_from,0,sector_buf,u32g_sector_size);
if((verify != cn_all_right_verify) && (verify != cn_ecc_right_verify))
{
result = false;
break;
}
verify = __write_sector_nand_with_ecc(
sector_to,0,sector_buf,u32g_sector_size);
if((verify != cn_all_right_verify) && (verify != cn_ecc_right_verify))
{
result = false;
break;
}
sector_from++;
sector_to++;
}
free(sector_buf);
erase_block_nand(PCRB_block);
return result;
}
//----扫描可视域---------------------------------------------------------------
//功能: 1、把visible_clip备份到visible_bak中。
// 2、所有窗口生成新的visible_clip
//参数: display，被扫描的显示器
//返回: false=失败，一般是因为剪切域池容量不够
//-----------------------------------------------------------------------------
bool_t __GK_ScanNewVisibleClip(struct tagDisplayRsc *display)
{
struct tagGkWinRsc *tempwin;
struct tagRectangle *rect;
struct tagClipRect *clip,*clip1,*clip_head = NULL;
s32 num,rect_left,rect_top,rect_right,rect_bottom,loop,temp;
u8 *sort_array_x,*sort_array_y;
num = (display->width+1)*sizeof(u8) + (display->height+1)*sizeof(u8);
sort_array_x = M_MallocLc(num,0);
if(sort_array_x == NULL)
return false;
sort_array_y = sort_array_x + display->width+1;
memset(sort_array_x,0,num);
tempwin = display->z_topmost;
// rect_left = 0;
// rect_top = 0;
while(1)
{ //取窗口可视边框，该边框是窗口受祖先窗口限制后的矩形
temp = tempwin->limit_left-tempwin->left + tempwin->absx0;
if(sort_array_x[temp] == 0)
{
sort_array_x[temp] = 1;
// rect_left++;
}
temp = tempwin->limit_right-tempwin->left+tempwin->absx0;
if(sort_array_x[temp] == 0)
{
sort_array_x[temp] = 1;
// rect_left++;
}
temp = tempwin->limit_top-tempwin->top + tempwin->absy0;
if(sort_array_y[temp] == 0)
{
sort_array_y[temp] = 1;
// rect_top++;
}
temp = tempwin->limit_bottom-tempwin->top+tempwin->absy0;
if(sort_array_y[temp] == 0)
{
sort_array_y[temp] = 1;
// rect_top++;
}
//执行__GK_GetRedrawClipAll函数注释中的step1
//保存窗口原来的可视域
tempwin->visible_bak = tempwin->visible_clip;
tempwin->visible_clip = NULL;
if(tempwin != display->desktop)
tempwin = tempwin->z_back;
else
break;
}
//处理桌面下的窗口，这些窗口肯定没有可视域
while(1)
{
tempwin = tempwin->z_back;
if(tempwin == display->z_topmost)
break;
tempwin->visible_bak = tempwin->visible_clip;
tempwin->visible_clip = NULL;
}
//按从左到右，从上到下的顺序(顺序不能改变)把所有垂直线、水平线围成的小clip
//串成双向链表，由clip_head做链表头
rect_top = 0;
temp = 0;
for(rect_bottom =1;rect_bottom <= display->height; rect_bottom++)
{
if(sort_array_y[rect_bottom] == 0)
continue;
rect_left = 0;
for(rect_right =1;rect_right <= display->width; rect_right++)
{
if(sort_array_x[rect_right] == 0)
continue;
clip = (struct tagClipRect*)Mb_Malloc(g_ptClipRectPool,0);
if(clip != NULL)
{
clip->rect.left = rect_left;
clip->rect.right = rect_right;
clip->rect.top = rect_top;
clip->rect.bottom = rect_bottom;
rect_left = rect_right;
__GK_ClipConnect(&clip_head,clip); //把小clip加入到链接起来
temp++;
}
else
{
__GK_FreeClipQueue(clip_head);
free(sort_array_x);
return false; //内存池不足，无法生成可视域队列
}
}
rect_top = rect_bottom;
}
free(sort_array_x);
//下面判断小clip的归属，并把他们加入到所属win的new_clip队列中
tempwin = display->z_topmost;
while(1)
{
clip = clip_head;
for(loop = temp; loop >0; loop--)
{
rect = &(clip->rect);
if((rect->left>=tempwin->limit_left-tempwin->left+tempwin->absx0)
&&(rect->top>=tempwin->limit_top-tempwin->top+tempwin->absy0)
&&(rect->right<=tempwin->limit_right-tempwin->left+tempwin->absx0)
&&(rect->bottom<=tempwin->limit_bottom-tempwin->top+tempwin->absy0))
{ //矩形在tempwin的可显示范围内,若不在则无需处理
//允许alpha或透明，区域将加入窗口可视域，但不从临时链表中删除。
if(tempwin->dest_blend)
{
clip1 = (struct tagClipRect*)Mb_Malloc(g_ptClipRectPool,0);
if(clip1 != NULL)
{
*clip1 = *clip;
}
else
{
__GK_FreeClipQueue(clip_head);
return false; //内存池不足，无法生成可视域队列
}
}else //不允许透明和alpha，区域加入窗口可视域，从临时链表删除
{
if(clip == clip_head)
clip_head = clip_head->next;
clip1 = clip;
clip->previous->next = clip->next;
clip->next->previous = clip->previous;
temp--;
}
clip = clip->next;
//把小clip加入到visible_clip队列中
__GK_ClipConnect(&tempwin->visible_clip,clip1);
}else //矩形不在tpwin的可显示范围内，无需处理。
{
clip = clip->next;
}
}
__GK_CombineClip_s(tempwin->visible_clip);//合并clip,按先x后y的顺序合并
if(tempwin != display->desktop)
tempwin = tempwin->z_back;
else
break;
}
return true;
}
bool_t install_vncserver_mirrordisplay(rfbScreenInfoPtr rfbserver)
{
bool_t ret=false;
struct tagDisplayRsc *base_display;
struct tagGkWinRsc *desktop;
struct tagDisplayRsc *mirror_display;//我们的镜像显示器
if(NULL==rfbserver)
{
return ret;
}
//通过桌面找到显示器，这种方法有点out ---TODO
desktop = GK_ApiGetDesktop("sim_display");
if(NULL==desktop)//找不到桌面。
{
return ret;
}
base_display=desktop->disp;
if(NULL==base_display)//找不到主显示器
{
return ret;
}
if((base_display->pixel_format>>8)<8)//暂时不支持8位像素格式
{
return ret;
}
vncclip_pool = Mb_CreatePool((void*)s_vncclip_rsc,
cn_limit_vncclip,
sizeof(struct tagClipRect),
20,100,
"vncclip_pool");
if(NULL == vncclip_pool)
{
debug_printf("#fatalerror--create the vncclip_pool failed!\n");
return ret;
}
mirror_display=M_MallocLc(sizeof(struct tagDisplayRsc),0);
if(NULL==mirror_display)
{
debug_printf("#fatalerror--malloc mirror display mem failed!\n");
Mb_DeletePool(vncclip_pool);
return ret;
}
memset(mirror_display,0,sizeof(struct tagDisplayRsc));
//初始化镜像显示器的一些必备属性，跟主显示器保持一致--TODO，
mirror_display->pixel_format = base_display->pixel_format;
mirror_display->width = base_display->width;
if(cn_vnc_keyboard_visual_enable)
{
mirror_display->height = base_display->height + cn_vnc_keyboard_height;
}
else
{
mirror_display->height = base_display->height;
}
mirror_display->frame_buffer = NULL;
mirror_display->draw.bm_to_screen=vnc_bm_to_screen;
ret= GK_InstallDisplayMirror(base_display,mirror_display,"vnc_server_disp");
if(ret)//安装成功
{ //区域设置
rfbserver->width=mirror_display->width;
rfbserver->height=mirror_display->height;
rfbserver->rfbServerFormat.bitsPerPixel=(mirror_display->pixel_format>>8);
rfbserver->frameBuffer=M_MallocLc(rfbserver->width*\
(rfbserver->height)*(rfbserver->rfbServerFormat.bitsPerPixel/8),0);
if(NULL==rfbserver->frameBuffer)
{
Rsc_DelNode((struct tagRscNode *)mirror_display);
free(mirror_display);
Mb_DeletePool(vncclip_pool);
debug_printf("#fatalerror--malloc rfbserver frame buf failed!\n");
return ret;
}
//镜像显示器和其基础显示器公用一个buf。
//初始化一些rfbserver的参数
debug_printf("fram buf = %08x %d bytes\n",rfbserver->frameBuffer,\
rfbserver->width*(rfbserver->height)*(rfbserver->rfbServerFormat.bitsPerPixel/8));
memset(rfbserver->frameBuffer,0,rfbserver->width*(rfbserver->height)*(rfbserver->rfbServerFormat.bitsPerPixel/8));
rfbserver->clip_head=NULL;
//像素格式
// rfbserver->rfbServerFormat.bitsPerPixel=rfbserver->bitsPerPixel;
//感觉rfbScreen对于色彩的设置有点冗余，可以考虑只用format就好了，后续修正--TODO
rfbserver->rfbServerFormat.bigEndian=false;
rfbserver->rfbServerFormat.trueColour=true;
rfbserver->paddedWidthInBytes=(rfbserver->rfbServerFormat.bitsPerPixel/8)*rfbserver->width;
switch(rfbserver->rfbServerFormat.bitsPerPixel)//目前就列举这几种吧，后续的再行补充
{
case 8://332格式
debug_printf("the server vmirror_display used 332 format!\n");
rfbserver->rfbServerFormat.redShift=5;
rfbserver->rfbServerFormat.greenShift=2;
rfbserver->rfbServerFormat.blueShift=0;
rfbserver->rfbServerFormat.redMax=((1<<3)-1);
rfbserver->rfbServerFormat.greenMax=((1<<3)-1);
rfbserver->rfbServerFormat.blueMax=((1<<2)-1);
rfbserver->rfbServerFormat.depth=8;
break;
case 16://565格式
debug_printf("the server vmirror_display used 565 format!\n");
rfbserver->rfbServerFormat.redShift=11;
rfbserver->rfbServerFormat.greenShift=5;
rfbserver->rfbServerFormat.blueShift=0;
rfbserver->rfbServerFormat.redMax=((1<<5)-1);
rfbserver->rfbServerFormat.greenMax=((1<<6)-1);
rfbserver->rfbServerFormat.blueMax=((1<<5)-1);
rfbserver->rfbServerFormat.depth=16;
break;
case 32://真彩色888
debug_printf("the server vmirror_display used 888 format!\n");
rfbserver->rfbServerFormat.redShift=16;
rfbserver->rfbServerFormat.greenShift=8;
rfbserver->rfbServerFormat.blueShift=0;
rfbserver->rfbServerFormat.redMax=((1<<8)-1);
rfbserver->rfbServerFormat.greenMax=((1<<8)-1);
rfbserver->rfbServerFormat.blueMax=((1<<8)-1);
rfbserver->rfbServerFormat.depth=24;
break;
default://不应该处理，后果很严重，后虚修补bug--TODO
break;
}
vncscreen=rfbserver;
vnc_set_vncclip_pool(vncclip_pool);
rfbserver->mirror_display = mirror_display;
return ret;
}
else
{