NvError NvRmPrivAp20ChipUniqueId(NvRmDeviceHandle hDevHandle,void* pId)
{
NvU64* pOut = (NvU64*)pId; // Pointer to output buffer
NvU32 OldRegData; // Old register contents
NvU32 NewRegData; // New register contents
NV_ASSERT(hDevHandle);
NV_ASSERT(pId);
#if NV_USE_FUSE_CLOCK_ENABLE
// Enable fuse clock
Ap20EnableModuleClock(hDevHandle, NvRmModuleID_Fuse, NV_TRUE);
#endif
// Access to unique id is protected, so make sure all registers visible first.
OldRegData = NV_REGR(hDevHandle, NvRmPrivModuleID_ClockAndReset, 0, CLK_RST_CONTROLLER_MISC_CLK_ENB_0);
NewRegData = NV_FLD_SET_DRF_NUM(CLK_RST_CONTROLLER, MISC_CLK_ENB, CFG_ALL_VISIBLE, 1, OldRegData);
NV_REGW(hDevHandle, NvRmPrivModuleID_ClockAndReset, 0, CLK_RST_CONTROLLER_MISC_CLK_ENB_0, NewRegData);
// Read the secure id from the fuse registers and copy to the output buffer.
*pOut = ((NvU64)NV_REGR(hDevHandle, (NvRmPrivModuleID)NvRmModuleID_Fuse, 0, FUSE_JTAG_SECUREID_0_0)) |
(((NvU64)NV_REGR(hDevHandle, (NvRmPrivModuleID)NvRmModuleID_Fuse, 0, FUSE_JTAG_SECUREID_1_0)) << 32);
// Restore the protected registers enable to the way we found it.
NV_REGW(hDevHandle, NvRmPrivModuleID_ClockAndReset, 0, CLK_RST_CONTROLLER_MISC_CLK_ENB_0, OldRegData);
#if NV_USE_FUSE_CLOCK_ENABLE
// Disable fuse clock
Ap20EnableModuleClock(hDevHandle, NvRmModuleID_Fuse, NV_FALSE);
#endif
return NvError_Success;
}
NvError
ReadObsData(
NvRmDeviceHandle rm,
NvRmModuleID modID,
NvU32 start_index,
NvU32 length,
NvU32 *value)
{
NvU32 i = 0, offset = 0, value1, value2;
NvU32 timeout;
NvU32 partID = 0xffffffff;
NvU32 index, temp;
for (i = 0; i < ObsInfoTableSize; i++)
{
if (modID == ObsInfoTable[i].modSelect)
{
partID = ObsInfoTable[i].partSelect;
break;
}
}
if (i == ObsInfoTableSize)
{
return NvError_BadParameter;
}
for(offset = 0; offset < length; offset++)
{
index = start_index + offset;
temp = NV_DRF_DEF(APB_MISC_GP, OBSCTRL, OBS_EN, ENABLE) |
NV_DRF_NUM(APB_MISC_GP, OBSCTRL, OBS_MOD_SEL, modID) |
NV_DRF_NUM(APB_MISC_GP, OBSCTRL, OBS_PART_SEL, partID) |
NV_DRF_NUM(APB_MISC_GP, OBSCTRL, OBS_SIG_SEL, index) ;
NV_REGW(rm, NvRmModuleID_Misc, 0, APB_MISC_GP_OBSCTRL_0, temp);
value1 = NV_REGR(rm, NvRmModuleID_Misc, 0, APB_MISC_GP_OBSCTRL_0);
timeout = 100;
do {
value2 = value1;
value1 = NV_REGR(rm, NvRmModuleID_Misc, 0, APB_MISC_GP_OBSDATA_0);
timeout --;
} while (value1 != value2 && timeout);
NvOsDebugPrintf("OBS bus modID 0x%x index 0x%x = value 0x%x",
modID, index, value1);
value[offset] = value1;
}
return NvSuccess;
}
static void
ReportRmPowerState(NvRmDeviceHandle hRmDeviceHandle)
{
NvU32 i;
NvRmPowerState OldRmState = NvRmPrivPowerGetState(hRmDeviceHandle);
NvRmPowerState NewRmState = NvRmPowerState_Idle;
// RM clients are in h/w autonomous (bypass) state if there are Power On
// references for NPG_AUTO group only; RM clients are in active state if
// there are Power On references for any other group
if (s_PowerOnRefCounts[NVRM_POWERGROUP_NPG_AUTO] != 0)
NewRmState = NvRmPowerState_AutoHw;
for (i = 0; i < NV_POWERGROUP_MAX; i++)
{
if (s_PowerOnRefCounts[i] != 0)
{
NewRmState = NvRmPowerState_Active;
break;
}
}
if (NewRmState == OldRmState)
return;
#if NVRM_POWER_VERBOSE_PRINTF
NVRM_POWER_PRINTF(("RM Clients Power State: %s\n",
((NewRmState == NvRmPowerState_Active) ? "Active" :
((NewRmState == NvRmPowerState_AutoHw) ? "AutoHw" : "Idle"))));
#endif
/*
* Set new combined RM clients power state in the storage shared with the
* OS adaptation layer. Check the previous state; if it was any of the low
* power states (i.e., this is the 1st RM power state report after suspend)
* notify all clients about wake up event.
*/
NvRmPrivPowerSetState(hRmDeviceHandle, NewRmState);
switch (OldRmState)
{
case NvRmPowerState_LP0:
NvOsDebugPrintf("*** Wakeup from LP0 *** wake-source: 0x%x\n",
NV_REGR(hRmDeviceHandle, NvRmModuleID_Pmif, 0, 0x14));
PowerEventNotify(hRmDeviceHandle, NvRmPowerEvent_WakeLP0);
break;
case NvRmPowerState_LP1:
NvOsDebugPrintf("*** Wakeup from LP1 ***\n");
PowerEventNotify(hRmDeviceHandle, NvRmPowerEvent_WakeLP1);
break;
case NvRmPowerState_SkippedLP0:
NvOsDebugPrintf("*** Wakeup after Skipped LP0 ***\n");
// resume procedure after Skipped LP0 is the same as after LP1
PowerEventNotify(hRmDeviceHandle, NvRmPowerEvent_WakeLP1);
break;
default:
break;
}
}
static void
McStatAp1x_Stop(
NvRmDeviceHandle rm,
NvU32 *client_0_cycles,
NvU32 *client_1_cycles,
NvU32 *llc_client_cycles,
NvU32 *llc_client_clocks,
NvU32 *mc_clocks)
{
*llc_client_cycles = NV_REGR(rm, NvRmPrivModuleID_ExternalMemoryController,
0, EMC_STAT_LLMC_COUNT_0_0);
*llc_client_clocks = NV_REGR(rm, NvRmPrivModuleID_ExternalMemoryController,
0, EMC_STAT_LLMC_CLOCKS_0);
*client_0_cycles = NV_REGR(rm, NvRmPrivModuleID_MemoryController,
0, MC_STAT_EMC_COUNT_0_0);
*client_1_cycles = NV_REGR(rm, NvRmPrivModuleID_MemoryController,
0, MC_STAT_EMC_COUNT_1_0);
*mc_clocks = NV_REGR(rm, NvRmPrivModuleID_MemoryController,
0, MC_STAT_EMC_CLOCKS_0);
}
NvU32
NvRmPrivGetBctCustomerOption(NvRmDeviceHandle hRm)
{
if (!NvRmIsSimulation())
{
return NV_REGR(hRm, NvRmModuleID_Pmif, 0, APBDEV_PMC_SCRATCH20_0);
}
else
{
return 0;
}
}
void NvRmPrivIoPowerControl(
NvRmDeviceHandle hRmDeviceHandle,
NvU32 NoIoPwrMask,
NvBool Enable)
{
NvU32 reg = NV_REGR(
hRmDeviceHandle, NvRmModuleID_Pmif, 0, APBDEV_PMC_NO_IOPOWER_0);
reg = Enable ? (reg & (~NoIoPwrMask)) : (reg | NoIoPwrMask);
#if NV_NO_IOPOWER_CONTROL
NV_REGW(hRmDeviceHandle,
NvRmModuleID_Pmif, 0, APBDEV_PMC_NO_IOPOWER_0, reg);
#endif
}
/* This function sets some performance timings for Mc & Emc. Numbers are from
* the Arch team.
*
*/
void NvRmPrivAp15SetupMc(NvRmDeviceHandle hRm)
{
NvU32 reg, mask;
reg = NV_REGR(hRm, NvRmPrivModuleID_MemoryController, 0,
MC_LOWLATENCY_CONFIG_0);
mask = NV_DRF_DEF(MC, LOWLATENCY_CONFIG, CMCR_LL_CTRL, ENABLE) |
NV_DRF_DEF(MC, LOWLATENCY_CONFIG, CMCR_LL_SEND_BOTH, ENABLE) |
NV_DRF_DEF(MC, LOWLATENCY_CONFIG, MPCORER_LL_CTRL, ENABLE) |
NV_DRF_DEF(MC, LOWLATENCY_CONFIG, MPCORER_LL_SEND_BOTH, ENABLE);
if ( mask != (reg & mask) )
NV_ASSERT(!"MC LL Path not enabled!");
/* 1) TIMEOUT value for VDE is 256 cycles, 3D, 2D timeouts are disabled, all others 512 cycles. */
NV_REGW(hRm, NvRmPrivModuleID_MemoryController, 0, MC_TIMEOUT_CTRL_0, 0x00000028);
NV_REGW(hRm, NvRmPrivModuleID_MemoryController, 0, MC_TIMEOUT_CMC_0, 0x88888888);
NV_REGW(hRm, NvRmPrivModuleID_MemoryController, 0, MC_TIMEOUT_DC_0, 0x88888888);
NV_REGW(hRm, NvRmPrivModuleID_MemoryController, 0, MC_TIMEOUT_DCB_0, 0x88888888);
NV_REGW(hRm, NvRmPrivModuleID_MemoryController, 0, MC_TIMEOUT_EPP_0, 0x88888888);
NV_REGW(hRm, NvRmPrivModuleID_MemoryController, 0, MC_TIMEOUT_G2_0, 0x0);
NV_REGW(hRm, NvRmPrivModuleID_MemoryController, 0, MC_TIMEOUT_HC_0, 0x88888888);
NV_REGW(hRm, NvRmPrivModuleID_MemoryController, 0, MC_TIMEOUT_ISP_0, 0x88888888);
NV_REGW(hRm, NvRmPrivModuleID_MemoryController, 0, MC_TIMEOUT_MPCORE_0, 0x88888888);
NV_REGW(hRm, NvRmPrivModuleID_MemoryController, 0, MC_TIMEOUT_MPEA_0, 0x88888888);
NV_REGW(hRm, NvRmPrivModuleID_MemoryController, 0, MC_TIMEOUT_MPEB_0, 0x88888888);
NV_REGW(hRm, NvRmPrivModuleID_MemoryController, 0, MC_TIMEOUT_MPEC_0, 0x88888888);
NV_REGW(hRm, NvRmPrivModuleID_MemoryController, 0, MC_TIMEOUT_NV_0, 0x0);
NV_REGW(hRm, NvRmPrivModuleID_MemoryController, 0, MC_TIMEOUT_PPCS_0, 0x88888888);
NV_REGW(hRm, NvRmPrivModuleID_MemoryController, 0, MC_TIMEOUT_VDE_0, 0x44444444);
NV_REGW(hRm, NvRmPrivModuleID_MemoryController, 0, MC_TIMEOUT1_VDE_0, 0x44444444);
NV_REGW(hRm, NvRmPrivModuleID_MemoryController, 0, MC_TIMEOUT_VI_0, 0x88888888);
/* 2) Command Queue values should be 2,2,6 for better performance. */
NV_REGW(hRm, NvRmPrivModuleID_ExternalMemoryController, 0, EMC_CMDQ_0, 0x00002206);
/* 3) MC_EMEM_ARB_CFG0_0 Should have optimal values for 166Mhz DRAM.
* 27:22 EMEM_BANKCNT_NSP_TH (0xC seems to be better for 166Mhz)
* 21:16 EMEM_BANKCNT_TH (0x8 seems to be better for 166Mhz)
*
* MC_EMEM_ARB_CFG0_0 <= 0x0308_1010
*/
NV_REGW(hRm, NvRmPrivModuleID_MemoryController, 0, MC_EMEM_ARB_CFG0_0, 0x03081010);
}
static void McErrorIntHandler(void* args)
{
NvU32 RegVal;
NvU32 IntStatus;
NvU32 IntClear = 0;
NvRmDeviceHandle hRm = (NvRmDeviceHandle)args;
IntStatus = NV_REGR(hRm, NvRmPrivModuleID_MemoryController, 0, MC_INTSTATUS_0);
if ( NV_DRF_VAL(MC, INTSTATUS, DECERR_AXI_INT, IntStatus) )
{
IntClear |= NV_DRF_DEF(MC, INTSTATUS, DECERR_AXI_INT, SET);
RegVal = NV_REGR(hRm, NvRmPrivModuleID_MemoryController, 0,
MC_DECERR_AXI_ADR_0);
NvOsDebugPrintf("AXI DecErrAddress=0x%x ", RegVal);
RegVal = NV_REGR(hRm, NvRmPrivModuleID_MemoryController, 0,
MC_DECERR_AXI_STATUS_0);
NvOsDebugPrintf("AXI DecErrStatus=0x%x ", RegVal);
}
if ( NV_DRF_VAL(MC, INTSTATUS, DECERR_EMEM_OTHERS_INT, IntStatus) )
{
IntClear |= NV_DRF_DEF(MC, INTSTATUS, DECERR_EMEM_OTHERS_INT, SET);
RegVal = NV_REGR(hRm, NvRmPrivModuleID_MemoryController, 0,
MC_DECERR_EMEM_OTHERS_ADR_0);
NvOsDebugPrintf("EMEM DecErrAddress=0x%x ", RegVal);
RegVal = NV_REGR(hRm, NvRmPrivModuleID_MemoryController, 0,
MC_DECERR_EMEM_OTHERS_STATUS_0);
NvOsDebugPrintf("EMEM DecErrStatus=0x%x ", RegVal);
}
if ( NV_DRF_VAL(MC, INTSTATUS, INVALID_GART_PAGE_INT, IntStatus) )
{
IntClear |= NV_DRF_DEF(MC, INTSTATUS, INVALID_GART_PAGE_INT, SET);
RegVal = NV_REGR(hRm, NvRmPrivModuleID_MemoryController, 0,
MC_GART_ERROR_ADDR_0);
NvOsDebugPrintf("GART DecErrAddress=0x%x ", RegVal);
RegVal = NV_REGR(hRm, NvRmPrivModuleID_MemoryController, 0,
MC_GART_ERROR_REQ_0);
NvOsDebugPrintf("GART DecErrStatus=0x%x ", RegVal);
}
NV_ASSERT(!"MC Decode Error ");
// Clear the interrupt.
NV_REGW(hRm, NvRmPrivModuleID_MemoryController, 0, MC_INTSTATUS_0, IntClear);
NvRmInterruptDone(s_McInterruptHandle);
}
NvError
NvRmAp20GetStraps(
NvRmDeviceHandle hDevice,
NvRmStrapGroup StrapGroup,
NvU32* pStrapValue)
{
NvU32 reg = NV_REGR(
hDevice, NvRmModuleID_Misc, 0, APB_MISC_PP_STRAPPING_OPT_A_0);
switch (StrapGroup)
{
case NvRmStrapGroup_RamCode:
reg = NV_DRF_VAL(APB_MISC_PP, STRAPPING_OPT_A, RAM_CODE, reg);
break;
default:
return NvError_NotSupported;
}
*pStrapValue = reg;
return NvSuccess;
}
NvRmMilliVolts
NvRmPrivPowerGroupGetVoltage(
NvRmDeviceHandle hRmDeviceHandle,
NvU32 PowerGroup)
{
NvRmMilliVolts Voltage = NvRmVoltsUnspecified;
if (PowerGroup >= NV_POWERGROUP_MAX)
return Voltage; // "virtual" groups are always On
// Do not check non-gated power group - it is On by definition
if (s_PowerGroupIds[PowerGroup] != NV_POWERGROUP_INVALID)
{
NvU32 reg = NV_REGR(
hRmDeviceHandle, NvRmModuleID_Pmif, 0, APBDEV_PMC_PWRGATE_STATUS_0);
if ((reg & (0x1 << s_PowerGroupIds[PowerGroup])) == 0x0)
{
// Specified power group is gated
Voltage = NvRmVoltsOff;
}
}
return Voltage;
}
void NvRmPrivAp20EmcParametersAdjust(NvRmDfs* pDfs)
{
NvRmDfsParam EmcParamDddr2 = { NVRM_DFS_PARAM_EMC_AP20_DDR2 };
NvRmDfsParam EmcParamLpDddr2 = { NVRM_DFS_PARAM_EMC_AP20_LPDDR2 };
NvU32 RegValue = NV_REGR(pDfs->hRm,
NvRmPrivModuleID_ExternalMemoryController, 0, EMC_FBIO_CFG5_0);
// Overwrite default EMC parameters and LP2 policy with SDRAM type specific
// settings
switch (NV_DRF_VAL(EMC, FBIO_CFG5, DRAM_TYPE, RegValue))
{
case EMC_FBIO_CFG5_0_DRAM_TYPE_LPDDR2:
pDfs->DfsParameters[NvRmDfsClockId_Emc] = EmcParamLpDddr2;
break;
case EMC_FBIO_CFG5_0_DRAM_TYPE_DDR2:
pDfs->DfsParameters[NvRmDfsClockId_Emc] = EmcParamDddr2;
break;
default:
NV_ASSERT(!"Not supported DRAM type");
}
}
NvRmPmRequest
NvRmPrivAp20GetPmRequest(
NvRmDeviceHandle hRmDevice,
const NvRmDfsSampler* pCpuSampler,
NvRmFreqKHz* pCpuKHz)
{
// Assume initial slave CPU1 On request
static NvRmPmRequest s_LastPmRequest = (NvRmPmRequest_CpuOnFlag | 0x1);
static NvRmFreqKHz s_Cpu1OnMinKHz = 0, s_Cpu1OffMaxKHz = 0;
static NvU32 s_Cpu1OnPendingCnt = 0, s_Cpu1OffPendingCnt = 0;
NvU32 t;
NvRmPmRequest PmRequest = NvRmPmRequest_None;
NvBool Cpu1Off =
(0 != NV_DRF_VAL(CLK_RST_CONTROLLER, RST_CPU_CMPLX_SET, SET_CPURESET1,
NV_REGR(hRmDevice, NvRmPrivModuleID_ClockAndReset, 0,
CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET_0)));
NvRmFreqKHz CpuLoadGaugeKHz;
// Use clocks for load when no busy hint, otherwise use activity metrics
if (NvRmPrivDfsGetBusyHintActive(NvRmDfsClockId_Cpu)) {
CpuLoadGaugeKHz = pCpuSampler->AverageKHz;
} else {
CpuLoadGaugeKHz = *pCpuKHz;
}
// Slave CPU1 power management policy thresholds:
// - use fixed values if they are defined explicitly, otherwise
// - set CPU1 OffMax threshold at 3/4 of cpu frequency range,
// and 1/2 of max frequency as CPU1 OnMin threshold
if ((s_Cpu1OffMaxKHz == 0) && (s_Cpu1OnMinKHz == 0))
{
NvRmFreqKHz MaxKHz =
NvRmPrivGetSocClockLimits(NvRmModuleID_Cpu)->MaxKHz;
s_Cpu1OnMinKHz = NVRM_CPU1_ON_MIN_KHZ ?
NVRM_CPU1_ON_MIN_KHZ : (MaxKHz / 2);
s_Cpu1OffMaxKHz = NVRM_CPU1_OFF_MAX_KHZ ?
NVRM_CPU1_OFF_MAX_KHZ : (3 * MaxKHz / 4);
NV_ASSERT(s_Cpu1OnMinKHz < s_Cpu1OffMaxKHz);
}
// Timestamp
if (s_pTimerUs == NULL)
s_pTimerUs = NvRmPrivAp15GetTimerUsVirtAddr(hRmDevice);
t = NV_READ32(s_pTimerUs);
/*
* Request OS kernel to turn CPU1 Off if all of the following is true:
* (a) CPU frequency is below OnMin threshold,
* (b) CPU1 is actually On
*
* Request OS kernel to turn CPU1 On if all of the following is true:
* (a) CPU frequency is above OffMax threshold
* (b) CPU1 is actually Off
*/
if (CpuLoadGaugeKHz < s_Cpu1OnMinKHz)
{
s_Cpu1OnPendingCnt = 0;
if ((s_Cpu1OffPendingCnt & 0x1) == 0)
{
s_Cpu1OffPendingCnt = t | 0x1; // Use LSb as a delay start flag
return PmRequest;
}
if ((t - s_Cpu1OffPendingCnt) < (NVRM_CPU1_OFF_PENDING_MS * 1000))
return PmRequest;
if (!Cpu1Off)
{
s_LastPmRequest = PmRequest = (NvRmPmRequest_CpuOffFlag | 0x1);
s_Cpu1OffPendingCnt = 0; // re-start delay after request
}
#if NVRM_TEST_PMREQUEST_UP_MODE
NV_REGW(hRmDevice, NvRmPrivModuleID_ClockAndReset, 0,
CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET_0,
CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET_0_SET_CPURESET1_FIELD);
#endif
}
else if (CpuLoadGaugeKHz > s_Cpu1OffMaxKHz)
{
s_Cpu1OffPendingCnt = 0;
if ((s_Cpu1OnPendingCnt & 0x1) == 0)
{
s_Cpu1OnPendingCnt = t | 0x1; // Use LSb as a delay start flag
return PmRequest;
}
if ((t - s_Cpu1OnPendingCnt) < (NVRM_CPU1_ON_PENDING_MS * 1000))
return PmRequest;
if (Cpu1Off)
{
s_LastPmRequest = PmRequest = (NvRmPmRequest_CpuOnFlag | 0x1);
*pCpuKHz = NvRmPrivGetSocClockLimits(NvRmModuleID_Cpu)->MaxKHz;
s_Cpu1OnPendingCnt = 0; // re-start delay after request
}
#if NVRM_TEST_PMREQUEST_UP_MODE
NV_REGW(hRmDevice, NvRmPrivModuleID_ClockAndReset, 0,
CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR_0,
CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR_0_CLR_CPURESET1_FIELD);
#endif
}
else
{ // Re-start both delays inside hysteresis loop
s_Cpu1OnPendingCnt = 0;
s_Cpu1OffPendingCnt = 0;
}
return PmRequest;
}
static void
PowerGroupPowerControl(
NvRmDeviceHandle hRmDeviceHandle,
NvU32 PowerGroup,
NvBool Enable)
{
NvU32 reg, Id, Mask, Status;
// Do nothing if not SoC platform
NV_ASSERT(hRmDeviceHandle);
if (NvRmPrivGetExecPlatform(hRmDeviceHandle) != ExecPlatform_Soc)
return;
// Do nothing if power group is already in requested state
NV_ASSERT(s_PowerGroupIds[PowerGroup] != NV_POWERGROUP_INVALID);
Id = s_PowerGroupIds[PowerGroup];
Mask = (0x1 << Id);
Status = Mask & NV_REGR(hRmDeviceHandle, NvRmModuleID_Pmif, 0,
APBDEV_PMC_PWRGATE_STATUS_0);
if (Enable == (Status != 0x0))
return;
/*
* Gating procedure:
* - assert resets to all modules in power group
* - toggle power gate
*
* Ungating procedure
* - assert resets to all modules in power group (redundunt)
* - toggle power gate
* - enable clocks to all modules in power group
* - reset propagation delay
* - remove clamping
* - disable clocks to all modules in power group
* - de-assert reset to all modules in power group
*
* Special note on toggle timers( shared with OAL which does CPU power
* gating): per convention with OAL default settings are never changed.
*/
PowerGroupResetControl(hRmDeviceHandle, PowerGroup, NV_TRUE);
reg = NV_DRF_DEF(APBDEV_PMC, PWRGATE_TOGGLE, START, ENABLE) | Id;
NV_REGW(hRmDeviceHandle, NvRmModuleID_Pmif, 0,
APBDEV_PMC_PWRGATE_TOGGLE_0, reg);
for (;;)
{
reg = NV_REGR(hRmDeviceHandle, NvRmModuleID_Pmif, 0,
APBDEV_PMC_PWRGATE_STATUS_0);
if (Status != (reg & Mask))
break;
}
if (Enable)
{
PowerGroupClockControl(hRmDeviceHandle, PowerGroup, NV_TRUE);
NvOsWaitUS(NVRM_RESET_DELAY);
// PCIE and VDE clamping masks are swapped relatively to
// partition Ids (bug 602975)
if (PowerGroup == NV_POWERGROUP_PCIE)
Mask = 0x1 << s_PowerGroupIds[NV_POWERGROUP_VDE];
else if (PowerGroup == NV_POWERGROUP_VDE)
Mask = 0x1 << s_PowerGroupIds[NV_POWERGROUP_PCIE];
NV_REGW(hRmDeviceHandle, NvRmModuleID_Pmif, 0,
APBDEV_PMC_REMOVE_CLAMPING_CMD_0, Mask);
for (;;)
{
reg = NV_REGR(hRmDeviceHandle, NvRmModuleID_Pmif, 0,
APBDEV_PMC_REMOVE_CLAMPING_CMD_0);
if (reg == 0)
break;
}
PowerGroupClockControl(hRmDeviceHandle, PowerGroup, NV_FALSE);
PowerGroupResetControl(hRmDeviceHandle, PowerGroup, NV_FALSE);
}
}
