int NaClSelLdrMain(int argc, char **argv) {
int opt;
char *rest;
struct redir *entry;
struct redir *redir_queue;
struct redir **redir_qend;
struct NaClApp state;
char *nacl_file = NULL;
char *blob_library_file = NULL;
int rpc_supplies_nexe = 0;
int export_addr_to = -1;
struct NaClApp *nap = &state;
struct GioFile gout;
NaClErrorCode errcode = LOAD_INTERNAL;
struct GioMemoryFileSnapshot blob_file;
int ret_code;
struct DynArray env_vars;
char *log_file = NULL;
int verbosity = 0;
int fuzzing_quit_after_load = 0;
int debug_mode_bypass_acl_checks = 0;
int debug_mode_ignore_validator = 0;
int skip_qualification = 0;
int handle_signals = 0;
int enable_debug_stub = 0;
struct NaClPerfCounter time_all_main;
const char **envp;
struct NaClEnvCleanser env_cleanser;
#if NACL_OSX
/* Mac dynamic libraries cannot access the environ variable directly. */
envp = (const char **) *_NSGetEnviron();
#else
/* Overzealous code style check is overzealous. */
/* @IGNORE_LINES_FOR_CODE_HYGIENE[1] */
extern char **environ;
envp = (const char **) environ;
#endif
ret_code = 1;
redir_queue = NULL;
redir_qend = &redir_queue;
memset(&state, 0, sizeof state);
NaClAllModulesInit();
NaClBootstrapChannelErrorReporterInit();
NaClErrorLogHookInit(NaClBootstrapChannelErrorReporter, &state);
verbosity = NaClLogGetVerbosity();
NaClPerfCounterCtor(&time_all_main, "SelMain");
fflush((FILE *) NULL);
NaClDebugExceptionHandlerStandaloneHandleArgs(argc, argv);
if (!GioFileRefCtor(&gout, stdout)) {
fprintf(stderr, "Could not create general standard output channel\n");
exit(1);
}
if (!NaClAppCtor(&state)) {
NaClLog(LOG_FATAL, "NaClAppCtor() failed\n");
}
if (!DynArrayCtor(&env_vars, 0)) {
NaClLog(LOG_FATAL, "Failed to allocate env var array\n");
}
/*
* On platforms with glibc getopt, require POSIXLY_CORRECT behavior,
* viz, no reordering of the arglist -- stop argument processing as
* soon as an unrecognized argument is encountered, so that, for
* example, in the invocation
*
* sel_ldr foo.nexe -vvv
*
* the -vvv flags are made available to the nexe, rather than being
* consumed by getopt. This makes the behavior of the Linux build
* of sel_ldr consistent with the Windows and OSX builds.
*/
while ((opt = my_getopt(argc, argv,
#if NACL_LINUX
"+D:z:"
#endif
"aB:ceE:f:Fgh:i:l:Qr:RsSvw:X:Z")) != -1) {
switch (opt) {
case 'a':
fprintf(stderr, "DEBUG MODE ENABLED (bypass acl)\n");
debug_mode_bypass_acl_checks = 1;
break;
case 'B':
blob_library_file = optarg;
break;
case 'c':
++debug_mode_ignore_validator;
break;
#if NACL_LINUX
case 'D':
NaClHandleRDebug(optarg, argv[0]);
break;
#endif
case 'e':
nap->enable_exception_handling = 1;
break;
case 'E':
/*
* For simplicity, we treat the environment variables as a
* list of strings rather than a key/value mapping. We do not
* try to prevent duplicate keys or require the strings to be
* of the form "KEY=VALUE". This is in line with how execve()
* works in Unix.
*
* We expect that most callers passing "-E" will either pass
* in a fixed list or will construct the list using a
* high-level language, in which case de-duplicating keys
* outside of sel_ldr is easier. However, we could do
* de-duplication here if it proves to be worthwhile.
*/
if (!DynArraySet(&env_vars, env_vars.num_entries, optarg)) {
NaClLog(LOG_FATAL, "Adding item to env_vars failed\n");
}
break;
case 'f':
nacl_file = optarg;
break;
case 'F':
fuzzing_quit_after_load = 1;
break;
case 'g':
enable_debug_stub = 1;
break;
case 'h':
case 'r':
case 'w':
/* import host descriptor */
entry = malloc(sizeof *entry);
if (NULL == entry) {
fprintf(stderr, "No memory for redirection queue\n");
exit(1);
}
entry->next = NULL;
entry->nacl_desc = strtol(optarg, &rest, 0);
entry->tag = HOST_DESC;
entry->u.host.d = strtol(rest+1, (char **) 0, 0);
entry->u.host.mode = ImportModeMap(opt);
*redir_qend = entry;
redir_qend = &entry->next;
break;
case 'i':
/* import IMC handle */
entry = malloc(sizeof *entry);
if (NULL == entry) {
fprintf(stderr, "No memory for redirection queue\n");
exit(1);
}
entry->next = NULL;
entry->nacl_desc = strtol(optarg, &rest, 0);
entry->tag = IMC_DESC;
entry->u.handle = (NaClHandle) strtol(rest+1, (char **) 0, 0);
*redir_qend = entry;
redir_qend = &entry->next;
break;
case 'l':
log_file = optarg;
break;
case 'Q':
fprintf(stderr, "PLATFORM QUALIFICATION DISABLED BY -Q - "
"Native Client's sandbox will be unreliable!\n");
skip_qualification = 1;
break;
case 'R':
rpc_supplies_nexe = 1;
break;
/* case 'r': with 'h' and 'w' above */
case 's':
nap->validator_stub_out_mode = 1;
break;
case 'S':
handle_signals = 1;
break;
case 'v':
++verbosity;
NaClLogIncrVerbosity();
break;
/* case 'w': with 'h' and 'r' above */
case 'X':
export_addr_to = strtol(optarg, (char **) 0, 0);
break;
#if NACL_LINUX
case 'z':
NaClHandleReservedAtZero(optarg);
break;
#endif
case 'Z':
NaClLog(LOG_WARNING, "Enabling Fixed-Feature CPU Mode\n");
nap->fixed_feature_cpu_mode = 1;
if (!nap->validator->FixCPUFeatures(nap->cpu_features)) {
NaClLog(LOG_ERROR,
"This CPU lacks features required by "
"fixed-function CPU mode.\n");
exit(1);
}
break;
default:
fprintf(stderr, "ERROR: unknown option: [%c]\n\n", opt);
PrintUsage();
exit(-1);
}
}
if (debug_mode_ignore_validator == 1)
fprintf(stderr, "DEBUG MODE ENABLED (ignore validator)\n");
else if (debug_mode_ignore_validator > 1)
fprintf(stderr, "DEBUG MODE ENABLED (skip validator)\n");
if (verbosity) {
int ix;
char const *separator = "";
fprintf(stderr, "sel_ldr argument list:\n");
for (ix = 0; ix < argc; ++ix) {
fprintf(stderr, "%s%s", separator, argv[ix]);
separator = " ";
}
putc('\n', stderr);
}
if (debug_mode_bypass_acl_checks) {
NaClInsecurelyBypassAllAclChecks();
}
/*
* change stdout/stderr to log file now, so that subsequent error
* messages will go there. unfortunately, error messages that
* result from getopt processing -- usually out-of-memory, which
* shouldn't happen -- won't show up.
*/
if (NULL != log_file) {
NaClLogSetFile(log_file);
}
if (rpc_supplies_nexe) {
if (NULL != nacl_file) {
fprintf(stderr,
"sel_ldr: mutually exclusive flags -f and -R both used\n");
exit(1);
}
/* post: NULL == nacl_file */
if (export_addr_to < 0) {
fprintf(stderr,
"sel_ldr: -R requires -X to set up secure command channel\n");
exit(1);
}
} else {
if (NULL == nacl_file && optind < argc) {
nacl_file = argv[optind];
++optind;
}
if (NULL == nacl_file) {
fprintf(stderr, "No nacl file specified\n");
exit(1);
}
/* post: NULL != nacl_file */
}
/*
* post condition established by the above code (in Hoare logic
* terminology):
*
* NULL == nacl_file iff rpc_supplies_nexe
*
* so hence forth, testing !rpc_supplies_nexe suffices for
* establishing NULL != nacl_file.
*/
CHECK((NULL == nacl_file) == rpc_supplies_nexe);
/* to be passed to NaClMain, eventually... */
argv[--optind] = (char *) "NaClMain";
state.ignore_validator_result = (debug_mode_ignore_validator > 0);
state.skip_validator = (debug_mode_ignore_validator > 1);
if (getenv("NACL_UNTRUSTED_EXCEPTION_HANDLING") != NULL) {
state.enable_exception_handling = 1;
}
if (state.enable_exception_handling || enable_debug_stub) {
#if NACL_WINDOWS
state.attach_debug_exception_handler_func =
NaClDebugExceptionHandlerStandaloneAttach;
#elif NACL_LINUX
/* NaCl's signal handler is always enabled on Linux. */
#elif NACL_OSX
if (!NaClInterceptMachExceptions()) {
fprintf(stderr, "ERROR setting up Mach exception interception.\n");
return -1;
}
#else
# error Unknown host OS
#endif
}
if (NACL_LINUX) {
handle_signals = 1;
}
errcode = LOAD_OK;
/*
* in order to report load error to the browser plugin through the
* secure command channel, we do not immediate jump to cleanup code
* on error. rather, we continue processing (assuming earlier
* errors do not make it inappropriate) until the secure command
* channel is set up, and then bail out.
*/
/*
* Ensure the platform qualification checks pass.
*
* NACL_DANGEROUS_SKIP_QUALIFICATION_TEST is used by tsan / memcheck
* (see src/third_party/valgrind/).
*/
if (!skip_qualification &&
getenv("NACL_DANGEROUS_SKIP_QUALIFICATION_TEST") != NULL) {
fprintf(stderr, "PLATFORM QUALIFICATION DISABLED BY ENVIRONMENT - "
"Native Client's sandbox will be unreliable!\n");
skip_qualification = 1;
}
if (!skip_qualification) {
NaClErrorCode pq_error = NACL_FI_VAL("pq", NaClErrorCode,
NaClRunSelQualificationTests());
if (LOAD_OK != pq_error) {
errcode = pq_error;
nap->module_load_status = pq_error;
fprintf(stderr, "Error while loading \"%s\": %s\n",
NULL != nacl_file ? nacl_file
: "(no file, to-be-supplied-via-RPC)",
NaClErrorString(errcode));
}
}
if (handle_signals) {
NaClSignalHandlerInit();
} else {
/*
* Patch the Windows exception dispatcher to be safe in the case
* of faults inside x86-64 sandboxed code. The sandbox is not
* secure on 64-bit Windows without this.
*/
#if (NACL_WINDOWS && NACL_ARCH(NACL_BUILD_ARCH) == NACL_x86 && \
NACL_BUILD_SUBARCH == 64)
NaClPatchWindowsExceptionDispatcher();
#endif
}
NaClSignalTestCrashOnStartup();
/*
* Open both files first because (on Mac OS X at least)
* NaClAppLoadFile() enables an outer sandbox.
*/
if (NULL != blob_library_file) {
NaClFileNameForValgrind(blob_library_file);
if (0 == GioMemoryFileSnapshotCtor(&blob_file, blob_library_file)) {
perror("sel_main");
fprintf(stderr, "Cannot open \"%s\".\n", blob_library_file);
exit(1);
}
NaClPerfCounterMark(&time_all_main, "SnapshotBlob");
NaClPerfCounterIntervalLast(&time_all_main);
}
NaClAppInitialDescriptorHookup(nap);
if (!rpc_supplies_nexe) {
struct GioMemoryFileSnapshot main_file;
NaClFileNameForValgrind(nacl_file);
if (0 == GioMemoryFileSnapshotCtor(&main_file, nacl_file)) {
perror("sel_main");
fprintf(stderr, "Cannot open \"%s\".\n", nacl_file);
exit(1);
}
NaClPerfCounterMark(&time_all_main, "SnapshotNaclFile");
NaClPerfCounterIntervalLast(&time_all_main);
if (LOAD_OK == errcode) {
NaClLog(2, "Loading nacl file %s (non-RPC)\n", nacl_file);
errcode = NaClAppLoadFile((struct Gio *) &main_file, nap);
if (LOAD_OK != errcode) {
fprintf(stderr, "Error while loading \"%s\": %s\n",
nacl_file,
NaClErrorString(errcode));
fprintf(stderr,
("Using the wrong type of nexe (nacl-x86-32"
" on an x86-64 or vice versa)\n"
"or a corrupt nexe file may be"
" responsible for this error.\n"));
}
NaClPerfCounterMark(&time_all_main, "AppLoadEnd");
NaClPerfCounterIntervalLast(&time_all_main);
NaClXMutexLock(&nap->mu);
nap->module_load_status = errcode;
NaClXCondVarBroadcast(&nap->cv);
NaClXMutexUnlock(&nap->mu);
}
if (-1 == (*((struct Gio *) &main_file)->vtbl->Close)((struct Gio *)
&main_file)) {
fprintf(stderr, "Error while closing \"%s\".\n", nacl_file);
}
(*((struct Gio *) &main_file)->vtbl->Dtor)((struct Gio *) &main_file);
if (fuzzing_quit_after_load) {
exit(0);
}
}
/*
* Execute additional I/O redirections. NB: since the NaClApp
* takes ownership of host / IMC socket descriptors, all but
* the first run will not get access if the NaClApp closes
* them. Currently a normal NaClApp process exit does not
* close descriptors, since the underlying host OS will do so
* as part of service runtime exit.
*/
NaClLog(4, "Processing I/O redirection/inheritance from command line\n");
for (entry = redir_queue; NULL != entry; entry = entry->next) {
switch (entry->tag) {
case HOST_DESC:
NaClAddHostDescriptor(nap, entry->u.host.d,
entry->u.host.mode, entry->nacl_desc);
break;
case IMC_DESC:
NaClAddImcHandle(nap, entry->u.handle, entry->nacl_desc);
break;
}
}
/*
* If export_addr_to is set to a non-negative integer, we create a
* bound socket and socket address pair and bind the former to
* descriptor NACL_SERVICE_PORT_DESCRIPTOR (3 [see sel_ldr.h]) and
* the latter to descriptor NACL_SERVICE_ADDRESS_DESCRIPTOR (4).
* The socket address is sent to the export_addr_to descriptor.
*
* The service runtime also accepts a connection on the bound socket
* and spawns a secure command channel thread to service it.
*/
if (0 <= export_addr_to) {
NaClCreateServiceSocket(nap);
/*
* LOG_FATAL errors that occur before NaClSetUpBootstrapChannel will
* not be reported via the crash log mechanism (for Chromium
* embedding of NaCl, shown in the JavaScript console).
*
* Some errors, such as due to NaClRunSelQualificationTests, do not
* trigger a LOG_FATAL but instead set module_load_status to be sent
* in the start_module RPC reply. Log messages associated with such
* errors would be seen, since NaClSetUpBootstrapChannel will get
* called.
*/
NaClSetUpBootstrapChannel(nap, (NaClHandle) export_addr_to);
/*
* NB: spawns a thread that uses the command channel. we do
* this after NaClAppLoadFile so that NaClApp object is more
* fully populated. Hereafter any changes to nap should be done
* while holding locks.
*/
NaClSecureCommandChannel(nap);
}
/*
* May have created a thread, so need to synchronize uses of nap
* contents henceforth.
*/
if (rpc_supplies_nexe) {
errcode = NaClWaitForLoadModuleStatus(nap);
NaClPerfCounterMark(&time_all_main, "WaitForLoad");
NaClPerfCounterIntervalLast(&time_all_main);
} else {
/**************************************************************************
* TODO(bsy): This else block should be made unconditional and
* invoked after the LoadModule RPC completes, eliminating the
* essentially dulicated code in latter part of NaClLoadModuleRpc.
* This cannot be done until we have full saucer separation
* technology, since Chrome currently uses sel_main_chrome.c and
* relies on the functionality of the duplicated code.
*************************************************************************/
if (LOAD_OK == errcode) {
if (verbosity) {
gprintf((struct Gio *) &gout, "printing NaClApp details\n");
NaClAppPrintDetails(nap, (struct Gio *) &gout);
}
/*
* Finish setting up the NaCl App. On x86-32, this means
* allocating segment selectors. On x86-64 and ARM, this is
* (currently) a no-op.
*/
errcode = NaClAppPrepareToLaunch(nap);
if (LOAD_OK != errcode) {
nap->module_load_status = errcode;
fprintf(stderr, "NaClAppPrepareToLaunch returned %d", errcode);
}
NaClPerfCounterMark(&time_all_main, "AppPrepLaunch");
NaClPerfCounterIntervalLast(&time_all_main);
}
/* Give debuggers a well known point at which xlate_base is known. */
NaClGdbHook(&state);
}
/*
* Tell the debug stub to bind a TCP port before enabling the outer
* sandbox. This is only needed on Mac OS X since that is the only
* platform where we have an outer sandbox in standalone sel_ldr.
* In principle this call should work on all platforms, but Windows
* XP seems to have some problems when we do bind()/listen() on a
* separate thread from accept().
*/
if (enable_debug_stub && NACL_OSX) {
if (!NaClDebugBindSocket()) {
exit(1);
}
}
/*
* Enable the outer sandbox, if one is defined. Do this as soon as
* possible.
*
* This must come after NaClWaitForLoadModuleStatus(), which waits
* for another thread to have called NaClAppLoadFile().
* NaClAppLoadFile() does not work inside the Mac outer sandbox in
* standalone sel_ldr when using a dynamic code area because it uses
* NaClCreateMemoryObject() which opens a file in /tmp.
*
* We cannot enable the sandbox if file access is enabled.
*/
if (!NaClAclBypassChecks && g_enable_outer_sandbox_func != NULL) {
g_enable_outer_sandbox_func();
}
if (NULL != blob_library_file) {
if (LOAD_OK == errcode) {
NaClLog(2, "Loading blob file %s\n", blob_library_file);
errcode = NaClAppLoadFileDynamically(nap, (struct Gio *) &blob_file);
if (LOAD_OK != errcode) {
fprintf(stderr, "Error while loading \"%s\": %s\n",
blob_library_file,
NaClErrorString(errcode));
}
NaClPerfCounterMark(&time_all_main, "BlobLoaded");
NaClPerfCounterIntervalLast(&time_all_main);
}
if (-1 == (*((struct Gio *) &blob_file)->vtbl->Close)((struct Gio *)
&blob_file)) {
fprintf(stderr, "Error while closing \"%s\".\n", blob_library_file);
}
(*((struct Gio *) &blob_file)->vtbl->Dtor)((struct Gio *) &blob_file);
if (verbosity) {
gprintf((struct Gio *) &gout, "printing post-IRT NaClApp details\n");
NaClAppPrintDetails(nap, (struct Gio *) &gout);
}
}
/*
* Print out a marker for scripts to use to mark the start of app
* output.
*/
NaClLog(1, "NACL: Application output follows\n");
/*
* Make sure all the file buffers are flushed before entering
* the application code.
*/
fflush((FILE *) NULL);
if (NULL != nap->secure_service) {
NaClErrorCode start_result;
/*
* wait for start_module RPC call on secure channel thread.
*/
start_result = NaClWaitForStartModuleCommand(nap);
NaClPerfCounterMark(&time_all_main, "WaitedForStartModuleCommand");
NaClPerfCounterIntervalLast(&time_all_main);
if (LOAD_OK == errcode) {
errcode = start_result;
}
}
/*
* error reporting done; can quit now if there was an error earlier.
*/
if (LOAD_OK != errcode) {
NaClLog(4,
"Not running app code since errcode is %s (%d)\n",
NaClErrorString(errcode),
errcode);
goto done;
}
if (!DynArraySet(&env_vars, env_vars.num_entries, NULL)) {
NaClLog(LOG_FATAL, "Adding env_vars NULL terminator failed\n");
}
NaClEnvCleanserCtor(&env_cleanser, 0);
if (!NaClEnvCleanserInit(&env_cleanser, envp,
(char const *const *)env_vars.ptr_array)) {
NaClLog(LOG_FATAL, "Failed to initialise env cleanser\n");
}
if (!NaClAppLaunchServiceThreads(nap)) {
fprintf(stderr, "Launch service threads failed\n");
goto done;
}
if (enable_debug_stub) {
if (!NaClDebugInit(nap)) {
goto done;
}
}
NACL_TEST_INJECTION(BeforeMainThreadLaunches, ());
if (!NaClCreateMainThread(nap,
argc - optind,
argv + optind,
NaClEnvCleanserEnvironment(&env_cleanser))) {
fprintf(stderr, "creating main thread failed\n");
goto done;
}
NaClEnvCleanserDtor(&env_cleanser);
NaClPerfCounterMark(&time_all_main, "CreateMainThread");
NaClPerfCounterIntervalLast(&time_all_main);
DynArrayDtor(&env_vars);
ret_code = NaClWaitForMainThreadToExit(nap);
NaClPerfCounterMark(&time_all_main, "WaitForMainThread");
NaClPerfCounterIntervalLast(&time_all_main);
NaClPerfCounterMark(&time_all_main, "SelMainEnd");
NaClPerfCounterIntervalTotal(&time_all_main);
/*
* exit_group or equiv kills any still running threads while module
* addr space is still valid. otherwise we'd have to kill threads
* before we clean up the address space.
*/
NaClExit(ret_code);
done:
fflush(stdout);
if (verbosity) {
gprintf((struct Gio *) &gout, "exiting -- printing NaClApp details\n");
NaClAppPrintDetails(nap, (struct Gio *) &gout);
printf("Dumping vmmap.\n"); fflush(stdout);
PrintVmmap(nap);
fflush(stdout);
}
/*
* If there is a secure command channel, we sent an RPC reply with
* the reason that the nexe was rejected. If we exit now, that
* reply may still be in-flight and the various channel closure (esp
* reverse channel) may be detected first. This would result in a
* crash being reported, rather than the error in the RPC reply.
* Instead, we wait for the hard-shutdown on the command channel.
*/
if (LOAD_OK != errcode) {
NaClBlockIfCommandChannelExists(nap);
}
if (verbosity > 0) {
printf("Done.\n");
}
fflush(stdout);
if (handle_signals) NaClSignalHandlerFini();
NaClAllModulesFini();
NaClExit(ret_code);
/* Unreachable, but having the return prevents a compiler error. */
return ret_code;
}
int NaClMainForChromium(int handle_count, const NaClHandle *handles,
int debug) {
char *av[1];
int ac = 1;
const char **envp;
struct NaClApp state;
int main_thread_only = 1;
char *nacl_file = "test_nexe/hello_ppapi.nexe";
struct NaClApp *nap;
enum NaClAbiCheckOption check_abi = NACL_ABI_CHECK_OPTION_CHECK;
struct GioFile gout;
struct GioMemoryFileSnapshot gf;
NaClErrorCode errcode;
int ret_code = 1;
struct NaClEnvCleanser env_cleanser;
#if NACL_OSX
/* Mac dynamic libraries cannot access the environ variable directly. */
envp = (const char **) *_NSGetEnviron();
#else
/* Overzealous code style check is overzealous. */
/* @IGNORE_LINES_FOR_CODE_HYGIENE[1] */
extern char **environ;
envp = (const char **) environ;
#endif
NaClAllModulesInit();
/* Add a handler to catch untrusted errors only */
NaClSignalHandlerAdd(NaClSignalHandleUntrusted);
/* to be passed to NaClMain, eventually... */
av[0] = "NaClMain";
if (!NaClAppCtor(&state)) {
fprintf(stderr, "Error while constructing app state\n");
goto done;
}
state.restrict_to_main_thread = main_thread_only;
nap = &state;
errcode = LOAD_OK;
/*
* in order to report load error to the browser plugin through the
* secure command channel, we do not immediate jump to cleanup code
* on error. rather, we continue processing (assuming earlier
* errors do not make it inappropriate) until the secure command
* channel is set up, and then bail out.
*/
/*
* Ensure this operating system platform is supported.
*/
errcode = NaClRunSelQualificationTests();
if (LOAD_OK != errcode) {
nap->module_load_status = errcode;
fprintf(stderr, "Error while loading in SelMain: %s\n",
NaClErrorString(errcode));
}
/* Give debuggers a well known point at which xlate_base is known. */
NaClGdbHook(&state);
if (0 == GioMemoryFileSnapshotCtor(&gf, nacl_file)) {
perror("sel_main");
fprintf(stderr, "Cannot open \"%s\".\n", nacl_file);
errcode = LOAD_OPEN_ERROR;
}
if (LOAD_OK == errcode) {
errcode = NaClAppLoadFile((struct Gio *) &gf, nap, check_abi);
if (LOAD_OK != errcode) {
fprintf(stderr, "Error while loading \"%s\": %s\n",
nacl_file,
NaClErrorString(errcode));
fprintf(stderr,
("Using the wrong type of nexe (nacl-x86-32"
" on an x86-64 or vice versa)\n"
"or a corrupt nexe file may be"
" responsible for this error.\n"));
}
NaClXMutexLock(&nap->mu);
nap->module_load_status = errcode;
NaClXCondVarBroadcast(&nap->cv);
NaClXMutexUnlock(&nap->mu);
}
if (LOAD_OK == errcode) {
if (verbosity) {
gprintf((struct Gio *) &gout, "printing NaClApp details\n");
NaClAppPrintDetails(nap, (struct Gio *) &gout);
}
/*
* Finish setting up the NaCl App. This includes dup'ing
* descriptors 0-2 and making them available to the NaCl App.
*/
errcode = NaClAppPrepareToLaunch(nap,
0,
1,
2);
if (LOAD_OK != errcode) {
nap->module_load_status = errcode;
fprintf(stderr, "NaClAppPrepareToLaunch returned %d", errcode);
}
}
if (-1 == (*((struct Gio *) &gf)->vtbl->Close)((struct Gio *) &gf)) {
fprintf(stderr, "Error while closing \"%s\".\n", nacl_file);
}
(*((struct Gio *) &gf)->vtbl->Dtor)((struct Gio *) &gf);
/*
* Print out a marker for scripts to use to mark the start of app
* output.
*/
NaClLog(1, "NACL: Application output follows\n");
/*
* Make sure all the file buffers are flushed before entering
* the application code.
*/
fflush((FILE *) NULL);
/*
* Enable debugging if requested.
*/
if (debug) NaClDebugSetAllow(1);
NaClEnvCleanserCtor(&env_cleanser);
if (!NaClEnvCleanserInit(&env_cleanser, envp)) {
NaClLog(LOG_FATAL, "Failed to initialise env cleanser\n");
}
/*
* only nap->ehdrs.e_entry is usable, no symbol table is
* available.
*/
if (!NaClCreateMainThread(nap, ac, av,
NaClEnvCleanserEnvironment(&env_cleanser))) {
fprintf(stderr, "creating main thread failed\n");
goto done;
}
NaClEnvCleanserDtor(&env_cleanser);
ret_code = NaClWaitForMainThreadToExit(nap);
/*
* exit_group or equiv kills any still running threads while module
* addr space is still valid. otherwise we'd have to kill threads
* before we clean up the address space.
*/
return ret_code;
done:
fflush(stdout);
NaClAllModulesFini();
return ret_code;
}