const NvRmModuleClockLimits*
NvRmPrivClockLimitsInit(NvRmDeviceHandle hRmDevice)
{
NvU32 i;
NvRmFreqKHz CpuMaxKHz, AvpMaxKHz, VdeMaxKHz, TDMaxKHz, DispMaxKHz;
NvRmSKUedLimits* pSKUedLimits;
const NvRmScaledClkLimits* pHwLimits;
const NvRmSocShmoo* pShmoo;
NV_ASSERT(hRmDevice);
NvRmPrivChipFlavorInit(hRmDevice);
pShmoo = s_ChipFlavor.pSocShmoo;
pHwLimits = &pShmoo->ScaledLimitsList[0];
#ifndef CONFIG_FAKE_SHMOO
pSKUedLimits = pShmoo->pSKUedLimits;
#else
/*
NvRmFreqKHz CpuMaxKHz;
NvRmFreqKHz AvpMaxKHz;
NvRmFreqKHz VdeMaxKHz;
NvRmFreqKHz McMaxKHz;
NvRmFreqKHz Emc2xMaxKHz;
NvRmFreqKHz TDMaxKHz;
NvRmFreqKHz DisplayAPixelMaxKHz;
NvRmFreqKHz DisplayBPixelMaxKHz;
NvRmMilliVolts NominalCoreMv; // for common core rail
NvRmMilliVolts NominalCpuMv; // for dedicated CPU rail
*/
pSKUedLimits = pShmoo->pSKUedLimits;
// override default with configuration values
// CPU clock duh!
pSKUedLimits->CpuMaxKHz = MAX_CPU_OC_FREQ;
#ifdef CONFIG_BOOST_PERIPHERALS
// AVP clock
pSKUedLimits->AvpMaxKHz = CONFIG_MAX_AVP_OC_FREQ;
// 3D clock
pSKUedLimits->TDMaxKHz = CONFIG_MAX_3D_OC_FREQ;
#endif // CONFIG_BOOST_PERIPHERALS
#endif // CONFIG_FAKE_SHMOO
NvOsDebugPrintf("NVRM corner (%d, %d)\n",
s_ChipFlavor.corner, s_ChipFlavor.CpuCorner);
NvOsMemset((void*)s_pClockScales, 0, sizeof(s_pClockScales));
NvOsMemset(s_ClockRangeLimits, 0, sizeof(s_ClockRangeLimits));
NvOsMemset(s_VoltageStepRefCounts, 0, sizeof(s_VoltageStepRefCounts));
s_VoltageStepRefCounts[0] = NvRmPrivModuleID_Num; // all at minimum step
// Combine AVP/System clock absolute limit with scaling V/F ladder upper
// boundary, and set default clock range for all present modules the same
// as for AVP/System clock
#ifdef CONFIG_AVP_OVERCLOCK
AvpMaxKHz = 266400;
#else
AvpMaxKHz = pSKUedLimits->AvpMaxKHz;
for (i = 0; i < pShmoo->ScaledLimitsListSize; i++)
{
if (pHwLimits[i].HwDeviceId == NV_DEVID_AVP)
{
AvpMaxKHz = NV_MIN(
AvpMaxKHz, pHwLimits[i].MaxKHzList[pShmoo->ShmooVmaxIndex]);
break;
}
}
#endif //CONFIG_AVP_OVERCLOCK
for (i = 0; i < NvRmPrivModuleID_Num; i++)
{
NvRmModuleInstance *inst;
if (NvRmPrivGetModuleInstance(hRmDevice, i, &inst) == NvSuccess)
{
s_ClockRangeLimits[i].MaxKHz = AvpMaxKHz;
s_ClockRangeLimits[i].MinKHz = NVRM_BUS_MIN_KHZ;
}
}
// Fill in limits for modules with slectable clock sources and/or dividers
// as specified by the h/w table according to the h/w device ID
// (CPU and AVP are not in relocation table - need translate id explicitly)
// TODO: need separate subclock limits? (current implementation applies
// main clock limits to all subclocks)
for (i = 0; i < pShmoo->ScaledLimitsListSize; i++)
{
NvRmModuleID id;
if (pHwLimits[i].HwDeviceId == NV_DEVID_CPU)
id = NvRmModuleID_Cpu;
else if (pHwLimits[i].HwDeviceId == NV_DEVID_AVP)
id = NvRmModuleID_Avp;
else if (pHwLimits[i].HwDeviceId == NVRM_DEVID_CLK_SRC)
id = NvRmClkLimitsExtID_ClkSrc;
else
id = NvRmPrivDevToModuleID(pHwLimits[i].HwDeviceId);
if ((id != NVRM_DEVICE_UNKNOWN) &&
(pHwLimits[i].SubClockId == 0))
{
s_ClockRangeLimits[id].MinKHz = pHwLimits[i].MinKHz;
s_ClockRangeLimits[id].MaxKHz =
pHwLimits[i].MaxKHzList[pShmoo->ShmooVmaxIndex];
s_pClockScales[id] = pHwLimits[i].MaxKHzList;
}
}
// Fill in CPU scaling data if SoC has dedicated CPU rail, and CPU clock
// characterization data is separated from other modules on common core rail
if (s_ChipFlavor.pCpuShmoo)
{
const NvRmScaledClkLimits* pCpuLimits =
s_ChipFlavor.pCpuShmoo->pScaledCpuLimits;
NV_ASSERT(pCpuLimits && (pCpuLimits->HwDeviceId == NV_DEVID_CPU));
s_ClockRangeLimits[NvRmModuleID_Cpu].MinKHz = pCpuLimits->MinKHz;
s_ClockRangeLimits[NvRmModuleID_Cpu].MaxKHz =
pCpuLimits->MaxKHzList[s_ChipFlavor.pCpuShmoo->ShmooVmaxIndex];
s_pClockScales[NvRmModuleID_Cpu] = pCpuLimits->MaxKHzList;
}
// Set AVP upper clock boundary with combined Absolute/Scaled limit;
// Sync System clock with AVP (System is not in relocation table)
s_ClockRangeLimits[NvRmModuleID_Avp].MaxKHz = AvpMaxKHz;
s_ClockRangeLimits[NvRmPrivModuleID_System].MaxKHz =
s_ClockRangeLimits[NvRmModuleID_Avp].MaxKHz;
s_ClockRangeLimits[NvRmPrivModuleID_System].MinKHz =
s_ClockRangeLimits[NvRmModuleID_Avp].MinKHz;
s_pClockScales[NvRmPrivModuleID_System] = s_pClockScales[NvRmModuleID_Avp];
// Set VDE upper clock boundary with combined Absolute/Scaled limit (on
// AP15/Ap16 VDE clock derived from the system bus, and VDE maximum limit
// must be the same as AVP/System).
VdeMaxKHz = pSKUedLimits->VdeMaxKHz;
VdeMaxKHz = NV_MIN(
VdeMaxKHz, s_ClockRangeLimits[NvRmModuleID_Vde].MaxKHz);
if ((hRmDevice->ChipId.Id == 0x15) || (hRmDevice->ChipId.Id == 0x16))
{
NV_ASSERT(VdeMaxKHz == AvpMaxKHz);
}
s_ClockRangeLimits[NvRmModuleID_Vde].MaxKHz = VdeMaxKHz;
// Set upper clock boundaries for devices on CPU bus (CPU, Mselect,
// CMC) with combined Absolute/Scaled limits
CpuMaxKHz = pSKUedLimits->CpuMaxKHz;
CpuMaxKHz = NV_MIN(
CpuMaxKHz, s_ClockRangeLimits[NvRmModuleID_Cpu].MaxKHz);
s_ClockRangeLimits[NvRmModuleID_Cpu].MaxKHz = CpuMaxKHz;
if ((hRmDevice->ChipId.Id == 0x15) || (hRmDevice->ChipId.Id == 0x16))
{
s_ClockRangeLimits[NvRmModuleID_CacheMemCtrl].MaxKHz = CpuMaxKHz;
s_ClockRangeLimits[NvRmPrivModuleID_Mselect].MaxKHz = CpuMaxKHz;
NV_ASSERT(s_ClockRangeLimits[NvRmClkLimitsExtID_ClkSrc].MaxKHz >=
CpuMaxKHz);
}
else if (hRmDevice->ChipId.Id == 0x20)
{
// No CMC; TODO: Mselect/CPU <= 1/4?
s_ClockRangeLimits[NvRmPrivModuleID_Mselect].MaxKHz = CpuMaxKHz >> 2;
}
NvError
NvRmPowerVoltageControl(
NvRmDeviceHandle hRmDeviceHandle,
NvRmModuleID ModuleId,
NvU32 ClientId,
NvRmMilliVolts MinVolts,
NvRmMilliVolts MaxVolts,
const NvRmMilliVolts* PrefVoltageList,
NvU32 PrefVoltageListCount,
NvRmMilliVolts* pCurrentVolts)
{
NvError error;
NvU32 PowerGroup = 0;
NvBool PowerChanged = NV_FALSE;
NvRmModuleInstance *pInstance = NULL;
ModuleVoltageReq* pVoltageReq = NULL;
NvRmPowerClient* pPowerClient = NULL;
NvRmPowerRegistry* pRegistry = &s_PowerRegistry;
NvU32 ClientIndex = NVRM_POWER_ID2INDEX(ClientId);
/* validate the Rm Handle */
NV_ASSERT(hRmDeviceHandle);
// Validate module ID and get associated Power Group
if (ModuleId == NvRmPrivModuleID_System)
{
PowerGroup = NVRM_POWERGROUP_NPG_AUTO;
}
else
{
error = NvRmPrivGetModuleInstance(hRmDeviceHandle, ModuleId, &pInstance);
if (error != NvSuccess)
{
NV_ASSERT(!" Voltage control: Invalid module ID. ");
return NvError_ModuleNotPresent;
}
PowerGroup = pInstance->DevPowerGroup;
NV_ASSERT(PowerGroup < NV_POWERGROUP_MAX);
}
NvOsMutexLock(s_hPowerClientMutex);
// Check if this ID was registered; return error otherwise
if (ClientIndex < pRegistry->UsedIndexRange)
{
pPowerClient = pRegistry->pPowerClients[ClientIndex];
}
if ((pPowerClient == NULL) || (pPowerClient->id != ClientId))
{
NvOsMutexUnlock(s_hPowerClientMutex);
return NvError_BadValue;
}
// Search for the previously recorded voltage request for this module
pVoltageReq = pPowerClient->pVoltageReqHead;
while ((pVoltageReq != NULL) && (pVoltageReq->ModuleId != ModuleId))
{
pVoltageReq = pVoltageReq->pNext;
}
// If it is a new voltage request record, allocate and fill it in,
// otherwise just update power status. In both cases determine if
// power requirements for the module have changed.
if (pVoltageReq == NULL)
{
pVoltageReq = NvOsAlloc(sizeof(*pVoltageReq));
if (pVoltageReq == NULL)
{
NvOsMutexUnlock(s_hPowerClientMutex);
return NvError_InsufficientMemory;
}
// Link at head
pVoltageReq->pNext = pPowerClient->pVoltageReqHead;
pPowerClient->pVoltageReqHead = pVoltageReq;
pVoltageReq->ModuleId = ModuleId;
pVoltageReq->PowerGroup = PowerGroup;
pVoltageReq->PowerCycled = NV_FALSE;
// Only new power On request counts as change
PowerChanged = (MaxVolts != NvRmVoltsOff);
}
else
{
// Only changes from On to Off or vice versa counts
PowerChanged = (pVoltageReq->MaxVolts != MaxVolts) &&
((pVoltageReq->MaxVolts == NvRmVoltsOff) ||
(MaxVolts == NvRmVoltsOff));
}
// Record new power request voltages
pVoltageReq->MinVolts = MinVolts;
pVoltageReq->MaxVolts = MaxVolts;
// If module power requirements have changed, update power group reference
// count, and execute the respective h/w power control procedure
if (PowerChanged)
{
if (MaxVolts != NvRmVoltsOff)
{
s_PowerOnRefCounts[PowerGroup]++;
if (s_PowerOnRefCounts[PowerGroup] == 1)
{
NvRmMilliVolts v =
NvRmPrivPowerGroupGetVoltage(hRmDeviceHandle, PowerGroup);
if (v == NvRmVoltsOff)
{
RecordPowerCycle(hRmDeviceHandle, PowerGroup);
NvRmPrivPowerGroupControl(hRmDeviceHandle, PowerGroup, NV_TRUE);
}
}
}
else
{
NV_ASSERT(s_PowerOnRefCounts[PowerGroup] != 0);
if (s_PowerOnRefCounts[PowerGroup] == 0)
{
NVRM_POWER_PRINTF(("Power balance failed: module %d\n", ModuleId));
}
s_PowerOnRefCounts[PowerGroup]--;
if (s_PowerOnRefCounts[PowerGroup] == 0)
{
NvRmPrivPowerGroupControl(hRmDeviceHandle, PowerGroup, NV_FALSE);
}
}
}
ReportRmPowerState(hRmDeviceHandle);
// Return current voltage, unless this is the first request after module
// was power cycled by RM; in the latter case return NvRmVoltsCycled value
if (pCurrentVolts != NULL)
{
*pCurrentVolts = NvRmPrivPowerGroupGetVoltage(hRmDeviceHandle, PowerGroup);
if (pVoltageReq->PowerCycled && (*pCurrentVolts != NvRmVoltsOff))
{
*pCurrentVolts = NvRmVoltsCycled;
}
}
// In any case clear power cycled indicator
pVoltageReq->PowerCycled = NV_FALSE;
NvOsMutexUnlock(s_hPowerClientMutex);
return NvSuccess;
}