BOOL OEMKitlStartup(void)
{
OAL_KITL_ARGS KITLArgs;
OAL_KITL_ARGS *pKITLArgs;
BOOL bRet = FALSE;
UCHAR *szDeviceId,buffer[OAL_KITL_ID_SIZE]="\0";
OALMSG(OAL_KITL&&OAL_FUNC, (L"[KITL] ++OEMKitlStartup()\r\n"));
// Look for bootargs left by the bootloader or left over from an earlier boot.
//
pKITLArgs = (OAL_KITL_ARGS *)OALArgsQuery(OAL_ARGS_QUERY_KITL);
szDeviceId = (UCHAR*)OALArgsQuery(OAL_ARGS_QUERY_DEVID);
// If no KITL arguments were found (typically provided by the bootloader), then select
// some default settings.
//
if (pKITLArgs == NULL)
{
memset(&KITLArgs, 0, sizeof(OAL_KITL_ARGS));
// By default, enable KITL and use USB Serial
KITLArgs.flags |= OAL_KITL_FLAGS_ENABLED;
KITLArgs.devLoc.IfcType = Internal;
KITLArgs.devLoc.BusNumber = 0;
KITLArgs.devLoc.PhysicalLoc = (PVOID)S3C6410_BASE_REG_PA_USBOTG_LINK;
KITLArgs.devLoc.LogicalLoc = (DWORD)KITLArgs.devLoc.PhysicalLoc;
pKITLArgs = &KITLArgs;
}
if (pKITLArgs->devLoc.LogicalLoc == BSP_BASE_REG_PA_DM9000A_IOBASE)
{
// Ethernet specific initialization
//configure chipselect for DM9000A
InitSROMC_DM9000A();
//setting EINT7 as IRQ_LAN
if (!(pKITLArgs->flags & OAL_KITL_FLAGS_POLL))
{
g_pGPIOReg = (S3C6410_GPIO_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_GPIO, FALSE);
}
// Setup pointers to the power on and power off functions to enable KITL
// functionality across suspend/resume
// Modify the g_kitlEthCS8900A structure defined in kitl_cfg.h
g_kitlEthDM9000A.pfnPowerOff = (OAL_KITLETH_POWER_OFF)BSPKitlEthPowerOff;
g_kitlEthDM9000A.pfnPowerOn = (OAL_KITLETH_POWER_ON)BSPKitlEthPowerOn;
}
bRet = OALKitlInit ((LPCSTR)szDeviceId, pKITLArgs, g_kitlDevices);
OALMSG(OAL_KITL&&OAL_FUNC, (L"[KITL] --OEMKitlStartup() = %d\r\n", bRet));
return bRet;
}
//------------------------------------------------------------------------------
//
// Function: OALIoCtlHalQueryDisplaySettings
//
// This function is called by GDI to query the kernel for information
// about a preferred resolution for the system to use.
//
static BOOL OALIoCtlHalQueryDisplaySettings(
UINT32 dwIoControlCode, VOID *lpInBuf, UINT32 nInBufSize,
VOID *lpOutBuf, UINT32 nOutBufSize, UINT32* lpBytesReturned)
{
DWORD dwErr = 0;
DWORD *displayType;
DWORD *framebufferDepth;
OALMSG(TRUE, (TEXT("++OALIoCtlHalQueryDisplaySettings()\r\n")));
displayType=(DWORD*) OALArgsQuery(BSP_ARGS_QUERY_DISPLAYTYPE);
OALMSG(TRUE, (TEXT("++BSP_ARGS_QUERY_DISPLAYTYPE: %d\r\n"), *displayType));
framebufferDepth=(DWORD*) OALArgsQuery(BSP_ARGS_QUERY_FRAMEBUFFERDEPTH);
OALMSG(TRUE, (TEXT("++BSP_ARGS_QUERY_FRAMEBUFFERDEPTH: %d\r\n"), *framebufferDepth));
if (lpBytesReturned)
{
*lpBytesReturned = 0;
}
if (lpOutBuf == NULL)
{
dwErr = 1;
}
else if ((sizeof(DWORD)*2) > nOutBufSize)
{
dwErr = 2;
}
else
{
// Check the boot arg structure for the default display settings.
__try
{
((PDWORD)lpOutBuf)[0] = (DWORD)(*displayType);
((PDWORD)lpOutBuf)[1] = (DWORD)(*framebufferDepth);
if (lpBytesReturned)
{
*lpBytesReturned = sizeof (DWORD)*2;
}
}
__except (EXCEPTION_EXECUTE_HANDLER)
{
dwErr = 3;
}
}
if (dwErr)
{
OALMSG(OAL_ERROR, (TEXT("[OAL:ERR] OALIoCtlHalQueryDisplaySettings() Failed dwErr = %s\r\n"), (dwErr==1)?"outbuf is NULL":"size of outbuf is too small"));
NKSetLastError(dwErr);
}
OALMSG(TRUE, (TEXT("++OALIoCtlHalQueryDisplaySettings()\r\n")));
return !dwErr;
}
static BOOL OALIoCtlEBootMAC(
UINT32 dwIoControlCode, VOID *lpInBuf, UINT32 nInBufSize, VOID *lpOutBuf,
UINT32 nOutBufSize, UINT32* lpBytesReturned)
{
OAL_KITL_ARGS *pKITLArgs;
BOOL rc = FALSE;
pKITLArgs = (OAL_KITL_ARGS *)OALArgsQuery(OAL_ARGS_QUERY_KITL);
// Check buffer size
if (lpBytesReturned != NULL)
{
*lpBytesReturned = sizeof(UINT8[6]);
}
if (lpOutBuf == NULL || nOutBufSize < sizeof(UINT8[6]))
{
NKSetLastError(ERROR_INSUFFICIENT_BUFFER);
RETAILMSG(TRUE, (L"WARN: OALIoCtlEBootMAC: Buffer too small\r\n"));
}
else
{
// Copy pattern to output buffer
memcpy(lpOutBuf, pKITLArgs->mac, sizeof(UINT8[6]));
// We are done
rc = TRUE;
}
// Indicate status
//OALMSG(OAL_IOCTL&&OAL_FUNC, (L"-OALIoCtlEBootMAC(rc = %d)\r\n", rc));
RETAILMSG(TRUE, (L"-OALIoCtlEBootMAC(rc = %d)\r\n", rc));
return rc;
}
void BSPKitlEthPowerOn(void)
{
OAL_KITL_ARGS *pKITLArgs;
PBYTE pBaseIOAddress = NULL;
UINT32 MemoryBase = 0;
KITL_RETAILMSG(ZONE_INIT, ("BSPKitlEthPowerOn: Powering On Ethernet KITL.\r\n"));
pKITLArgs = (OAL_KITL_ARGS *)OALArgsQuery(OAL_ARGS_QUERY_KITL);
if (pKITLArgs == NULL)
{
// This should do not happen, since this function is part of the Eth KITL driver structure
// But still, just in case...
KITL_RETAILMSG(ZONE_ERROR, ("BSPKitlEthPowerOn: No KITL args, returning.\r\n"));
return;
}
//configure chipselect for DM9000A
InitSROMC_DM9000A();
pBaseIOAddress = (PBYTE)OALPAtoVA(pKITLArgs->devLoc.LogicalLoc, FALSE);
MemoryBase = (UINT32)OALPAtoVA(BSP_BASE_REG_PA_DM9000A_MEMBASE, FALSE);
// Initialize the controller.
if (!DM9000AInit((PBYTE)pBaseIOAddress, MemoryBase, pKITLArgs->mac))
{
KITL_RETAILMSG(ZONE_INIT, ("BSPKitlEthPowerOn: ERROR: Failed to re-initialize Ethernet controller.\r\n"));
}
}
//------------------------------------------------------------------------------
//
// Function: OALIoCtlHalQueryFormatPartition
//
// This function is called by Filesys.exe to allow an OEM to specify whether a specific
// partition is to be formatted on mount. Before Filesys.exe calls this IOCTL, it checks
// the CheckForFormat registry value in the storage profile for your block driver.
//
static BOOL OALIoCtlHalQueryFormatPartition(
UINT32 code, VOID *lpInBuf, UINT32 nInBufSize, VOID *lpOutBuf,
UINT32 nOutBufSize, UINT32 *pOutSize)
{
OALMSG(OAL_IOCTL&&OAL_FUNC, (TEXT("++OALIoCtlHalFormatPartition()\r\n")));
if ( (lpInBuf == NULL)
||(nInBufSize != sizeof(STORAGECONTEXT))
|| (lpOutBuf == NULL)
|| (nOutBufSize < sizeof(BOOL)))
{
OALMSG(OAL_ERROR, (TEXT("[OAL:ERR] OALIoCtlHalFormatPartition() Invalid Input Parameter\r\n")));
return FALSE;
}
else
{
STORAGECONTEXT *pStore = (STORAGECONTEXT *)lpInBuf;
BOOL *pbClean = (BOOL *)lpOutBuf;
// This is the global shared Args flag
BOOL *bFormatPartFlag = (BOOL *) OALArgsQuery(BSP_ARGS_QUERY_FORMATPART);
OALMSG(OAL_VERBOSE, (TEXT("[OAL] Store partition info:\r\n")));
OALMSG(OAL_VERBOSE, (TEXT("[OAL] \tszPartitionName=%s\r\n"), pStore->PartInfo.szPartitionName));
OALMSG(OAL_VERBOSE, (TEXT("[OAL] \tsnNumSectors=%d\r\n"), pStore->PartInfo.snNumSectors));
OALMSG(OAL_VERBOSE, (TEXT("[OAL] \tdwAttributes=0x%x\r\n"), pStore->PartInfo.dwAttributes));
OALMSG(OAL_VERBOSE, (TEXT("[OAL] \tbPartType=0x%x\r\n"), pStore->PartInfo.bPartType));
// Set return value
*pbClean = *bFormatPartFlag;
// Clear the flag so that we don't do it again in next boot unless it is set again.
*bFormatPartFlag = FALSE;
if(*pbClean)
{
if(pStore->dwFlags & AFS_FLAG_BOOTABLE)
{
OALMSG(TRUE, (TEXT("[OAL] Clear Storage (System Registry Hive)\r\n")));
}
else
{
OALMSG(TRUE, (TEXT("[OAL] Clear Storage\r\n")));
}
}
else
{
OALMSG(TRUE, (TEXT("[OAL] Not Clear Storage\r\n")));
}
}
if(pOutSize)
{
*pOutSize = sizeof(UINT32);
}
OALMSG(OAL_IOCTL&&OAL_FUNC, (TEXT("--OALIoCtlHalFormatPartition()\r\n")));
return TRUE;
}
void InitPowerCTL()
{
DWORD *powerCTL;
volatile S3C6410_GPIO_REG *pGPIOReg = (S3C6410_GPIO_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_GPIO, FALSE);
powerCTL = (DWORD *)OALArgsQuery(BSP_ARGS_QUERY_POWERCTL);
PWRCTL_InitializePowerCTL(powerCTL,pGPIOReg);
}
//------------------------------------------------------------------------------
//
// Function: OALIoCtlHalPowerCTL
//
// This function is called by GDI to query the kernel for information
// about a preferred resolution for the system to use.
//
static BOOL OALIoCtlHalPowerCTL(
UINT32 dwIoControlCode, VOID *lpInBuf, UINT32 nInBufSize,
VOID *lpOutBuf, UINT32 nOutBufSize, UINT32* lpBytesReturned)
{
DWORD dwErr = 0;
DWORD *powerCTL;
OALMSG(OAL_IOCTL&&OAL_FUNC, (TEXT("++OALIoCtlHalPowerCTL()\r\n")));
powerCTL=(DWORD*) OALArgsQuery(BSP_ARGS_QUERY_POWERCTL);
if (lpBytesReturned)
{
*lpBytesReturned = 0;
}
if (lpOutBuf == NULL)
{
dwErr = ERROR_INVALID_PARAMETER;
}
else if (sizeof(DWORD)*1 > nOutBufSize)
{
dwErr = ERROR_INSUFFICIENT_BUFFER;
}
else
{
// Check the boot arg structure for the default display settings.
__try
{
((PDWORD)lpOutBuf)[0] = (DWORD)(*powerCTL);
if (lpBytesReturned)
{
*lpBytesReturned = sizeof (DWORD)*1;
}
}
__except (EXCEPTION_EXECUTE_HANDLER)
{
dwErr = ERROR_INVALID_PARAMETER;
}
}
if (dwErr)
{
OALMSG(OAL_ERROR, (TEXT("[OAL:ERR] OALIoCtlHalPowerCTL() Failed dwErr = 0x%08x\r\n"), dwErr));
NKSetLastError(dwErr);
}
OALMSG(OAL_IOCTL&&OAL_FUNC, (TEXT("++OALIoCtlHalPowerCTL()\r\n")));
return !dwErr;
}
//------------------------------------------------------------------------------
//
// Function: OALIoCtlHalGetHWEntropy
//
// Implements the IOCTL_HAL_GET_HWENTROPY handler. This function creates a
// 64-bit value which is unique to the hardware. This value never changes.
//
static BOOL OALIoCtlHalGetHWEntropy(
UINT32 dwIoControlCode, VOID *lpInBuf, UINT32 nInBufSize, VOID *lpOutBuf,
UINT32 nOutBufSize, UINT32* lpBytesReturned)
{
// TODO by Device Maker : This code is only sample.
// S3C6410 has IDs only for chip type not for each chip.
// If Device Maker wants unique ID for each device
// Device maker must modify this function.
// If Device has Ethernet Device, Use MAC address
// Recommended method is to use NAND's ID or UUIC's ID
// Device maker can make Unique ID with CHIP ID
UINT8 *UniqueID;
BOOL rc = FALSE;
OALMSG(OAL_IOCTL&&OAL_FUNC, (L"+OALIoCtlHalGetHWEntropy\r\n"));
UniqueID = (UINT8 *)OALArgsQuery(OAL_ARGS_QUERY_UUID);
// Check buffer size
if (lpBytesReturned != NULL)
{
*lpBytesReturned = sizeof(UINT8[16]);
}
if (lpOutBuf == NULL || nOutBufSize < sizeof(UINT8[16]))
{
NKSetLastError(ERROR_INSUFFICIENT_BUFFER);
OALMSG(OAL_WARN, (L"WARN: OALIoCtlHalGetHWEntropy: Buffer too small\r\n"));
}
else
{
// Copy pattern to output buffer
memcpy(lpOutBuf, UniqueID, sizeof(UINT8[16]));
// We are done
rc = TRUE;
}
// Indicate status
OALMSG(OAL_IOCTL&&OAL_FUNC, (L"-OALIoCtlHalGetHWEntropy(rc = %d)\r\n", rc));
return rc;
}
//------------------------------------------------------------------------------
//
// Function: OEMInit
//
// This is Windows CE OAL initialization function. It is called from kernel
// after basic initialization is made.
//
void OEMInit()
{
BOOL *bCleanBootFlag;
OALMSG(OAL_FUNC, (L"[OAL] ++OEMInit()\r\n"));
OALMSG(OAL_FUNC, (TEXT("[OAL] S3C6410_APLL_CLK : %d\n\r"), System_GetAPLLCLK()));
OALMSG(OAL_FUNC, (TEXT("[OAL] ARMCLK : %d\n\r"), System_GetARMCLK()));
OALMSG(OAL_FUNC, (TEXT("[OAL] HCLK : %d\n\r"), System_GetHCLK()));
OALMSG(OAL_FUNC, (TEXT("[OAL] PCLK : %d\n\r"), System_GetPCLK()));
OALMSG(1, (TEXT("[OAL] S3C6410_APLL_CLK : %d\n\r"), System_GetAPLLCLK()));
OALMSG(1, (TEXT("[OAL] ARMCLK : %d\n\r"), System_GetARMCLK()));
OALMSG(1, (TEXT("[OAL] HCLK : %d\n\r"), System_GetHCLK()));
OALMSG(1, (TEXT("[OAL] PCLK : %d\n\r"), System_GetPCLK()));
g_oalIoCtlClockSpeed = System_GetARMCLK();
//CEProcessorType = PROCESSOR_STRONGARM;
// Set memory size for DrWatson kernel support
//
dwNKDrWatsonSize = 128 * 1024;
// Intialize optional kernel functions. (Processor Extended Feature)
//
g_pOemGlobal->pfnIsProcessorFeaturePresent = (PFN_IsProcessorFeaturePresent)OALIsProcessorFeaturePresent;
// Set OEMSetMemoryAttributes function
g_pOemGlobal->pfnSetMemoryAttributes = (PFN_SetMemoryAttributes)OEMSetMemoryAttributes;
// Turn Off all Debug LED
//
// Initialize Clock Source
//
InitializeCLKSource();
// Initialize Clock Gating
//
InitializeCLKGating();
// Initialize Block Power
//
InitializeBlockPower();
// Initialize ExtPowerCTL
//
InitPowerCTL();
// Initialize OTG PHY Clock
//
InitializeOTGCLK();
// Initialize BCD registers in RTC to known values
// Initilize cache globals
//
OALCacheGlobalsInit();
OALLogSerial(L"DCache: %d sets, %d ways, %d line size, %d size\r\n",
g_oalCacheInfo.L1DSetsPerWay, g_oalCacheInfo.L1DNumWays,
g_oalCacheInfo.L1DLineSize, g_oalCacheInfo.L1DSize);
OALLogSerial(L"ICache: %d sets, %d ways, %d line size, %d size\r\n",
g_oalCacheInfo.L1ISetsPerWay, g_oalCacheInfo.L1INumWays,
g_oalCacheInfo.L1ILineSize, g_oalCacheInfo.L1ISize);
// Check and Initialize the BSP Args area
//
OALArgsInit((BSP_ARGS *)IMAGE_SHARE_ARGS_UA_START);
// Check clean boot flag in BSP Args area
//
OALMSG(OAL_FUNC, (TEXT("[OAL] OEMInit() : BSP Args forces Clean Boot\r\n")));
bCleanBootFlag = (BOOL *)OALArgsQuery(BSP_ARGS_QUERY_CLEANBOOT);
if (*bCleanBootFlag)
{
// Notify to filesys.exe that we want a clean boot.
NKForceCleanBoot();
}
// Initialize Interrupts
//
if (!OALIntrInit())
{
OALMSG(OAL_ERROR, (L"[OAL:ERR] OEMInit() : failed to initialize interrupts\r\n"));
}
// Initialize System Clock
//
OALTimerInit(RESCHED_PERIOD, (OEM_COUNT_1MS ), 0);
// Make high-res Monte Carlo profiling available to the kernel
//
g_pOemGlobal->pfnProfileTimerEnable = OEMProfileTimerEnable;
g_pOemGlobal->pfnProfileTimerDisable = OEMProfileTimerDisable;
// Initialize the KITL connection if required
//
KITLIoctl(IOCTL_KITL_STARTUP, NULL, 0, NULL, 0, NULL);
InitializeBank();
OALMSG(OAL_FUNC, (L"[OAL] --OEMInit()\r\n"));
}
//------------------------------------------------------------------------------
//
// Function: OEMPowerOff
//
// Description: Called when the system is to transition to it's lowest power mode (off)
//
//
void OEMPowerOff()
{
volatile S3C6400_SYSCON_REG *pSysConReg;
volatile S3C6400_GPIO_REG *pGPIOReg;
volatile S3C6400_VIC_REG *pVIC0Reg;
volatile S3C6400_VIC_REG *pVIC1Reg;
volatile S3C6400_DMAC_REG *pDMAC0Reg;
volatile S3C6400_DMAC_REG *pDMAC1Reg;
int nIndex = 0;
OALMSG(TRUE, (L"[OEM] ++OEMPowerOff()"));
#if 0 // KITL can not support Sleep
// Make sure that KITL is powered off
pArgs = (OAL_KITL_ARGS*)OALArgsQuery(OAL_ARGS_QUERY_KITL);
if ((pArgs->flags & OAL_KITL_FLAGS_ENABLED) != 0)
{
OALKitlPowerOff();
OALMSG(1, (L"OEMPowerOff: KITL Disabled\r\n"));
}
#endif
//-----------------------------
// Disable DVS and Set to Full Speed
//-----------------------------
#ifdef DVS_EN
ChangeDVSLevel(SYS_L0);
#endif
//-----------------------------
// Prepare Specific Actions for Sleep
//-----------------------------
BSPPowerOff();
//------------------------------
// Prepare CPU Entering Sleep Mode
//------------------------------
//----------------
// Map SFR Address
//----------------
pSysConReg = (S3C6400_SYSCON_REG *)OALPAtoVA(S3C6400_BASE_REG_PA_SYSCON, FALSE);
pGPIOReg = (S3C6400_GPIO_REG *)OALPAtoVA(S3C6400_BASE_REG_PA_GPIO, FALSE);
pVIC0Reg = (S3C6400_VIC_REG *)OALPAtoVA(S3C6400_BASE_REG_PA_VIC0, FALSE);
pVIC1Reg = (S3C6400_VIC_REG *)OALPAtoVA(S3C6400_BASE_REG_PA_VIC1, FALSE);
pDMAC0Reg = (S3C6400_DMAC_REG *)OALPAtoVA(S3C6400_BASE_REG_PA_DMA0, FALSE);
pDMAC1Reg = (S3C6400_DMAC_REG *)OALPAtoVA(S3C6400_BASE_REG_PA_DMA1, FALSE);
//------------------
// Save VIC Registers
//------------------
S3C6400_SaveState_VIC((void *)pVIC0Reg, (void *)pVIC1Reg, g_aSleepSave_VIC);
// Disable All Interrupt
pVIC0Reg->VICINTENCLEAR = 0xFFFFFFFF;
pVIC1Reg->VICINTENCLEAR = 0xFFFFFFFF;
pVIC0Reg->VICSOFTINTCLEAR = 0xFFFFFFFF;
pVIC1Reg->VICSOFTINTCLEAR = 0xFFFFFFFF;
//--------------------
// Save DMAC Registers
//--------------------
S3C6400_SaveState_DMACon((void *)pDMAC0Reg, g_aSleepSave_DMACon0);
S3C6400_SaveState_DMACon((void *)pDMAC1Reg, g_aSleepSave_DMACon1);
//------------------
// Save GPIO Register
//------------------
S3C6400_SaveState_GPIO((void *)pGPIOReg, g_aSleepSave_GPIO);
//--------------------
// Save SysCon Register
//--------------------
S3C6400_SaveState_SysCon((void *)pSysConReg, g_aSleepSave_SysCon);
//-------------------------------------------------------
// Unmask Clock Gating and Block Power turn On (SW workaround)
//-------------------------------------------------------
// HCLK_IROM, HCLK_MEM1, HCLK_MEM0, HCLK_MFC Should be Always On for power Mode (Something coupled with BUS operation)
//pSysConReg->HCLK_GATE |= ((1<<25)|(1<<22)|(1<<21)|(1<<0));
pSysConReg->HCLK_GATE = 0xFFFFFFFF;
pSysConReg->PCLK_GATE = 0xFFFFFFFF;
pSysConReg->SCLK_GATE = 0xFFFFFFFF;
// Turn On All Block Block Power
pSysConReg->NORMAL_CFG = 0xFFFFFF00;
// Wait for Block Power Stable
while((pSysConReg->BLK_PWR_STAT & 0x7E) != 0x7E);
//----------------------------
// Wake Up Source Configuration
//----------------------------
S3C6400_WakeUpSource_Configure();
//-------------------------------
// Extra work for Entering Sleep Mode
//-------------------------------
// USB Power Control
pSysConReg->OTHERS &= ~(1<<16); // USB Signal Mask Clear
pGPIOReg->SPCON |= (1<<3); // USB Tranceiver PAD to Suspend
// TODO: SPCONSLP ???
//pGPIOReg->SPCONSLP; // Use Default Valie
//-------------------------------
// GPIO Configuration for Sleep State
//-------------------------------
// TODO: Configure GPIO at Sleep
//BSPConfigGPIOforPowerOff();
// Sleep Mode Pad Configuration
pGPIOReg->SLPEN = 0x2; // Controlled by SLPEN Bit (You Should Clear SLPEN Bit in Wake Up Process...)
//-----------------------
// CPU Entering Sleep Mode
//-----------------------
OALCPUPowerOff(); // Now in Sleep
//----------------------------
// CPU Wake Up from Sleep Mode
//----------------------------
//----------------------------
// Wake Up Source Determine
//----------------------------
S3C6400_WakeUpSource_Detect();
// USB Power Control
pSysConReg->OTHERS |= (1<<16); // TODO: USB Signal Mask Set (Device must handle it...)
pGPIOReg->SPCON &= ~(1<<3); // USB Tranceiver PAD to Normal
// Restore SysCon Register
S3C6400_RestoreState_SysCon((void *)pSysConReg, g_aSleepSave_SysCon);
// Restore GPIO Register
S3C6400_RestoreState_GPIO((void *)pGPIOReg, g_aSleepSave_GPIO);
// Sleep Mode Pad Configuration
pGPIOReg->SLPEN = 0x2; // Clear SLPEN Bit for Pad back to Normal Mode
//-----------------------
// Restore DMAC Registers
//-----------------------
S3C6400_RestoreState_DMACon((void *)pDMAC0Reg, g_aSleepSave_DMACon0);
S3C6400_RestoreState_DMACon((void *)pDMAC1Reg, g_aSleepSave_DMACon1);
// Restore VIC Registers
S3C6400_RestoreState_VIC((void *)pVIC0Reg, (void *)pVIC1Reg, g_aSleepSave_VIC);
//pVIC0Reg->VICADDRESS = 0x0;
//pVIC1Reg->VICADDRESS = 0x0;
// UART Debug Port Initialize
OEMInitDebugSerial();
// Disable Vectored Interrupt Mode on CP15
System_DisableVIC();
// Enable Branch Prediction on CP15
System_EnableBP();
// Enable IRQ Interrupt on CP15
System_EnableIRQ();
// Enable FIQ Interrupt on CP15
System_EnableFIQ();
if (g_oalWakeSource == SYSWAKE_UNKNOWN)
{
OALMSG(TRUE, (L"[OEM:ERR] OEMPowerOff() : SYSWAKE_UNKNOWN , WAKEUP_STAT = 0x%08x", g_LastWakeupStatus));
}
// Initialize System Timer
OEMInitializeSystemTimer(RESCHED_PERIOD, OEM_COUNT_1MS, 0);
#if 0 // KITL can not support Sleep
// Reinitialize KITL
if ((pArgs->flags & OAL_KITL_FLAGS_ENABLED) != 0)
{
OALKitlPowerOn();
}
#endif
//--------------------------------------
// Post Processing Specific Actions for Wake Up
//--------------------------------------
BSPPowerOn();
OALMSG(TRUE, (L"[OEM] --OEMPowerOff()"));
}
//------------------------------------------------------------------------------
//
// Function: OALIoCtlHalGetHiveCleanFlag
//
// This function is used by Filesys.exe to query the OEM to determine if the registry hives
// and user profiles should be deleted and recreated.
//
// Notes: During a OS start up, Filesys.exe calls HIVECLEANFLAG_SYSTEM twice and followed by
// HIVECLEANFLAG_USER. We'll clear the shared Args flag after that.
//
static BOOL OALIoCtlHalGetHiveCleanFlag(
UINT32 code, VOID *lpInBuf, UINT32 nInBufSize, VOID *lpOutBuf,
UINT32 nOutBufSize, UINT32 *pOutSize)
{
BOOL bRet = FALSE;
OALMSG(OAL_IOCTL&&OAL_FUNC, (TEXT("++OALIoCtlHalGetHiveCleanFlag()\r\n")));
if ( (lpInBuf == NULL)
|| (nInBufSize != sizeof(DWORD))
|| (lpOutBuf == NULL)
|| (nOutBufSize != sizeof(BOOL)))
{
OALMSG(OAL_ERROR, (TEXT("[OAL:ERR] OALIoCtlHalGetHiveCleanFlag() Invalid Input Parameter\r\n")));
return FALSE;
}
else
{
DWORD *pdwFlags = (DWORD*)lpInBuf;
BOOL *pbClean = (BOOL*)lpOutBuf;
// This is the global shared Args flag
BOOL *bHiveCleanFlag = (BOOL*) OALArgsQuery(BSP_ARGS_QUERY_HIVECLEAN);
*pbClean = *bHiveCleanFlag;
bRet = *bHiveCleanFlag;
if (*pdwFlags == HIVECLEANFLAG_SYSTEM)
{
if(bRet)
{
OALMSG(TRUE, (TEXT("[OAL] Clear System Hive\r\n")));
}
else
{
OALMSG(TRUE, (TEXT("[OAL] Not Clear System Hive\r\n")));
}
}
else if (*pdwFlags == HIVECLEANFLAG_USERS)
{
if(bRet)
{
OALMSG(TRUE, (TEXT("[OAL] Clear User Hive\r\n")));
}
else
{
OALMSG(TRUE, (TEXT("[OAL] Not Clear User Hive\r\n")));
}
// We are done checking HiveCleanFlag by now (system hive is checked before user hive).
// Now is the time to clear the global shared Args flag if it is set by switch or software.
*bHiveCleanFlag = FALSE;
}
else
{
OALMSG(OAL_ERROR, (TEXT("[OAL] Unknown Flag 0x%x\r\n"), *pdwFlags));
}
}
OALMSG(OAL_IOCTL&&OAL_FUNC, (TEXT("--OALIoCtlHalGetHiveCleanFlag()\r\n")));
return(bRet);
}
//------------------------------------------------------------------------------
//
// Function: OEMPowerOff
//
// Description: Called when the system is to transition to it's lowest power mode (off)
//
//
void OEMPowerOff()
{
volatile S3C6410_SYSCON_REG *pSysConReg;
volatile S3C6410_GPIO_REG *pGPIOReg;
volatile S3C6410_VIC_REG *pVIC0Reg;
volatile S3C6410_VIC_REG *pVIC1Reg;
volatile S3C6410_DMAC_REG *pDMAC0Reg;
volatile S3C6410_DMAC_REG *pDMAC1Reg;
volatile OTG_PHY_REG *pOtgPhyReg;
OAL_KITL_ARGS *pArgs;
BOOL PowerStateOn;
int nIndex = 0;
OALMSG(TRUE, (L"[OEM] ++OEMPowerOff()"));
// Make sure that KITL is powered off
pArgs = (OAL_KITL_ARGS*)OALArgsQuery(OAL_ARGS_QUERY_KITL);
if (pArgs && ((pArgs->flags & OAL_KITL_FLAGS_ENABLED) != 0))
{
PowerStateOn = FALSE;
KITLIoctl (IOCTL_KITL_POWER_CALL, &PowerStateOn, sizeof(PowerStateOn), NULL, 0, NULL);
OALMSG(OAL_VERBOSE, (L"OEMPowerOff: KITL Disabled\r\n"));
}
//-----------------------------
// Prepare Specific Actions for Sleep
//-----------------------------
BSPPowerOff();
//------------------------------
// Prepare CPU Entering Sleep Mode
//------------------------------
//----------------
// Map SFR Address
//----------------
pSysConReg = (S3C6410_SYSCON_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_SYSCON, FALSE);
pGPIOReg = (S3C6410_GPIO_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_GPIO, FALSE);
pVIC0Reg = (S3C6410_VIC_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_VIC0, FALSE);
pVIC1Reg = (S3C6410_VIC_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_VIC1, FALSE);
pDMAC0Reg = (S3C6410_DMAC_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_DMA0, FALSE);
pDMAC1Reg = (S3C6410_DMAC_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_DMA1, FALSE);
pOtgPhyReg = (OTG_PHY_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_USBOTG_PHY, FALSE);
//------------------
// Save VIC Registers
//------------------
S3C6410_SaveState_VIC((void *)pVIC0Reg, (void *)pVIC1Reg, g_aSleepSave_VIC);
// Disable All Interrupt
pVIC0Reg->VICINTENCLEAR = 0xFFFFFFFF;
pVIC1Reg->VICINTENCLEAR = 0xFFFFFFFF;
pVIC0Reg->VICSOFTINTCLEAR = 0xFFFFFFFF;
pVIC1Reg->VICSOFTINTCLEAR = 0xFFFFFFFF;
//--------------------
// Save DMAC Registers
//--------------------
S3C6410_SaveState_DMACon((void *)pDMAC0Reg, g_aSleepSave_DMACon0);
S3C6410_SaveState_DMACon((void *)pDMAC1Reg, g_aSleepSave_DMACon1);
//------------------
// Save GPIO Register
//------------------
S3C6410_SaveState_GPIO((void *)pGPIOReg, g_aSleepSave_GPIO);
//--------------------
// Save SysCon Register
//--------------------
S3C6410_SaveState_SysCon((void *)pSysConReg, g_aSleepSave_SysCon);
//---------------------------------------------------------------------------
// Unmask Clock Gating for All IPsand Block Power turn On for the IPs not going to sleep
//---------------------------------------------------------------------------
// HCLK_IROM, HCLK_MEM1, HCLK_MEM0, HCLK_MFC Should be Always On for power Mode (Something coupled with BUS operation)
//pSysConReg->HCLK_GATE |= ((1<<25)|(1<<22)|(1<<21)|(1<<0));
pSysConReg->HCLK_GATE = 0xFFFFFFFF;
pSysConReg->PCLK_GATE = 0xFFFFFFFF;
pSysConReg->SCLK_GATE = 0xFFFFFFFF;
// Turn On All Block Block Power
pSysConReg->NORMAL_CFG = 0xFFFFFF00;
// Wait for Block Power Stable
while((pSysConReg->BLK_PWR_STAT & 0x7E) != 0x7E);
//----------------------------
// Wake Up Source Configuration
//----------------------------
// S3C6410_WakeUpSource_Configure();
//-------------------------------
// Extra work for Entering Sleep Mode
//-------------------------------
// USB Power Control
pSysConReg->OTHERS &= ~(1<<16); // USB Signal Mask Clear
pGPIOReg->SPCON |= (1<<3); // USB Tranceiver PAD to Suspend
#ifdef _IROM_SDMMC_
// Sleep Mode Pad Configuration. HSJANG 070926. SLPEN must be 0 to change cpcon value for reading OM.
#else
// Sleep Mode Pad Configuration
pGPIOReg->SLPEN = 0x2; // Controlled by SLPEN Bit (You Should Clear SLPEN Bit in Wake Up Process...)
#endif
//-----------------------
// CPU Entering Sleep Mode
//-----------------------
OALCPUPowerOff(); // Now in Sleep
//----------------------------
// CPU Wake Up from Sleep Mode
//----------------------------
// Restore SysCon Register
S3C6410_RestoreState_SysCon((void *)pSysConReg, g_aSleepSave_SysCon);
// Restore GPIO Register
S3C6410_RestoreState_GPIO((void *)pGPIOReg, g_aSleepSave_GPIO);
#ifdef _IROM_SDMMC_
// Sleep Mode Pad Configuration. HSJANG 070926. SLPEN must be 0 to change cpcon value for reading OM.
#else
// Sleep Mode Pad Configuration
pGPIOReg->SLPEN = 0x2; // Clear SLPEN Bit for Pad back to Normal Mode
#endif
//-----------------------
// Restore DMAC Registers
//-----------------------
S3C6410_RestoreState_DMACon((void *)pDMAC0Reg, g_aSleepSave_DMACon0);
S3C6410_RestoreState_DMACon((void *)pDMAC1Reg, g_aSleepSave_DMACon1);
// Restore VIC Registers
S3C6410_RestoreState_VIC((void *)pVIC0Reg, (void *)pVIC1Reg, g_aSleepSave_VIC);
// UART Debug Port Initialize
OEMInitDebugSerial();
// Disable Vectored Interrupt Mode on CP15
System_DisableVIC();
// Enable Branch Prediction on CP15
System_EnableBP();
// Enable IRQ Interrupt on CP15
System_EnableIRQ();
// Enable FIQ Interrupt on CP15
System_EnableFIQ();
// Initialize System Timer
OEMInitializeSystemTimer(RESCHED_PERIOD, OEM_COUNT_1MS, 0);
// USB Power Control
InitializeOTGCLK(); // pll_powerdown, suspend mode
pGPIOReg->SPCON &= ~(1<<3); // USB Tranceiver PAD to Normal
//--------------------------------------
// Post Processing Specific Actions for Wake Up
//--------------------------------------
BSPPowerOn();
// Reinitialize KITL
if (pArgs && ((pArgs->flags & OAL_KITL_FLAGS_ENABLED) != 0))
{
PowerStateOn = TRUE;
KITLIoctl (IOCTL_KITL_POWER_CALL, &PowerStateOn, sizeof(PowerStateOn), NULL, 0, NULL);
}
OALMSG(TRUE, (L"[OEM] --OEMPowerOff()"));
}
BOOL OEMKitlStartup(void)
{
OAL_KITL_ARGS kitlArgs;
OAL_KITL_ARGS *pArgs;
BOOL bRet = FALSE;
UCHAR *szDeviceId,buffer[OAL_KITL_ID_SIZE]="\0";
OALMSG(OAL_KITL&&OAL_FUNC, (L"[KITL] ++OEMKitlStartup()\r\n"));
OALMSG(TRUE, (L"[KITL] ++OEMKitlStartup()\r\n"));
memset(&kitlArgs, 0, sizeof (kitlArgs));
pArgs = (OAL_KITL_ARGS *)OALArgsQuery(OAL_ARGS_QUERY_KITL);
szDeviceId = (UCHAR*)OALArgsQuery(OAL_ARGS_QUERY_DEVID);
// Common parts
kitlArgs.devLoc.IfcType = InterfaceTypeUndefined;
g_kitlDevice.ifcType = InterfaceTypeUndefined;
if((pArgs->flags & OAL_KITL_FLAGS_ENABLED) == 0)
{
RETAILMSG(1,(TEXT("KITL was Disabled from EBOOT !!\r\nPlease set KITL Configuration in EBoot !!\r\n")));
return FALSE;
}
#ifdef KITL_SERIAL
KITLOutputDebugString ("[KITL] KITL: Serial\n");
bRet = InitKitlSerialArgs (&kitlArgs);
strcpy(buffer,"6400SerialKITL");
szDeviceId = buffer;
g_kitlDevice.id = kitlArgs.devLoc.LogicalLoc;
#endif
#ifdef KITL_USBSERIAL
KITLOutputDebugString ("[KITL] KITL: USB Serial\n");
bRet = InitKitlUSBSerialArgs (&kitlArgs);
strcpy(buffer,"6400USBSerialKITL");
szDeviceId = buffer;
g_kitlDevice.id = kitlArgs.devLoc.LogicalLoc;
#endif
#ifdef KITL_USBRNDIS
// TODO: TO be implemented
#endif
#ifdef KITL_ETHERNET
KITLOutputDebugString("[KITL]: Ethernet\r\n");
if (pArgs->devLoc.LogicalLoc == 0)
{
KITLOutputDebugString ("[KITL] pArgs = NULL\n");
bRet = InitKitlEtherArgs(&kitlArgs);
OALKitlCreateName(BSP_DEVICE_PREFIX, kitlArgs.mac, buffer);
szDeviceId = buffer;
g_kitlDevice.id = kitlArgs.devLoc.LogicalLoc;
}
else
{
KITLOutputDebugString ("[KITL] Kitl args bring from argument setting of RAM\n");
pArgs->flags |= OAL_KITL_FLAGS_VMINI;
memcpy(&kitlArgs, pArgs, sizeof(kitlArgs));
g_kitlDevice.name = L"6400Ethernet";
g_kitlDevice.ifcType = kitlArgs.devLoc.IfcType;
g_kitlDevice.id = kitlArgs.devLoc.LogicalLoc;
g_kitlDevice.type = OAL_KITL_TYPE_ETH;
g_kitlDevice.pDriver = (void *)&g_kitlEthCS8900A;
bRet = TRUE;
}
#endif // KITL_ETHERNET
RETAILMSG(KITL_DBON, (L"DeviceId................. %hs\r\n", szDeviceId));
RETAILMSG(KITL_DBON, (L"kitlArgs.flags............. 0x%x\r\n", kitlArgs.flags));
RETAILMSG(KITL_DBON, (L"kitlArgs.devLoc.IfcType.... %d\r\n", kitlArgs.devLoc.IfcType));
RETAILMSG(KITL_DBON, (L"kitlArgs.devLoc.LogicalLoc. 0x%x\r\n", kitlArgs.devLoc.LogicalLoc));
RETAILMSG(KITL_DBON, (L"kitlArgs.devLoc.PhysicalLoc 0x%x\r\n", kitlArgs.devLoc.PhysicalLoc));
RETAILMSG(KITL_DBON, (L"kitlArgs.devLoc.Pin........ %d\r\n", kitlArgs.devLoc.Pin));
RETAILMSG(KITL_DBON, (L"kitlArgs.ip4address........ %s\r\n", OALKitlIPtoString(kitlArgs.ipAddress)));
if (bRet == FALSE)
{
KITLOutputDebugString ("[KITL] KITL: None\n");
RETAILMSG(TRUE, (TEXT("[KITL] KITL Argument Initialize Fail !!\n")));
return FALSE;
}
KITLOutputDebugString ("[KITL] Call OALKitlInit()\r\n");
bRet = OALKitlInit ((LPCSTR)szDeviceId, &kitlArgs, &g_kitlDevice);
OALMSG(OAL_KITL&&OAL_FUNC, (L"[KITL] --OEMKitlStartup() = %d\r\n", bRet));
OALMSG(TRUE, (L"[KITL] --OEMKitlStartup() = %d\r\n", bRet));
return bRet;
}
BOOL
OEMKitlStartup(
)
{
BOOL rc = FALSE;
OAL_KITL_ARGS *pArgs, args;
CHAR *szDeviceId;
KITLSetDebug(
ZONE_ERROR |
ZONE_WARNING |
// ZONE_INIT |
// ZONE_KITL_OAL |
// ZONE_KITL_ETHER |
0);
KITL_RETAILMSG(ZONE_KITL_OAL, ("+OALKitlStart\r\n"));
// First get boot args and device id
pArgs = (OAL_KITL_ARGS*)OALArgsQuery(OAL_ARGS_QUERY_KITL);
// If we don't get kitl arguments use default
if (pArgs == NULL)
{
const UINT16 defaultMac[] = DEFAULT_MAC_ADDRESS;
KITL_RETAILMSG(ZONE_WARNING, (
"WARN: Boot arguments not found, use defaults\r\n"
));
memset(&args, 0, sizeof(args));
args.flags = OAL_KITL_FLAGS_ENABLED|OAL_KITL_FLAGS_DHCP;
args.devLoc.IfcType = Internal;
args.devLoc.BusNumber = 0;
args.devLoc.LogicalLoc = BSP_LAN9115_REGS_PA;
memcpy(args.mac,defaultMac,sizeof(args.mac));
pArgs = &args;
}
// We always create device name
// Try to generate from device id...
szDeviceId = OALArgsQuery(OAL_ARGS_QUERY_DEVICE_PREFIX);
if (szDeviceId == NULL) {
szDeviceId = BSP_DEVICE_35xx_PREFIX;
}
pArgs->flags |= OAL_KITL_FLAGS_EXTNAME;
// Initialize debug device
switch (pArgs->devLoc.IfcType)
{
case Internal:
switch (pArgs->devLoc.LogicalLoc)
{
case BSP_LAN9115_REGS_PA:
#if 0
// enable clocks to GPIO banks that have KITL dependencies so we can do initialization
OEMKitlEnableClocks(TRUE);
// Reset LAN chip
pGPIORegs = OALPAtoUA(BSP_RESET_ETHER_KITL_GPIO_PA);
CLRREG32(&pGPIORegs->DATAOUT, 1 << (BSP_RESET_ETHER_KITL_GPIO % 32));
OALStall(1000);
SETREG32(&pGPIORegs->DATAOUT, 1 << (BSP_RESET_ETHER_KITL_GPIO % 32));
OALStall(1000);
// Prepare interrupt
pGPIORegs = OALPAtoUA(BSP_ETHER_GPIO_PA);
SETREG32(&pGPIORegs->OE, 1 << (BSP_IRQ_ETHER_KITL % 32));
// Interrupt on falling edge
SETREG32(&pGPIORegs->FALLINGDETECT, 1 << (BSP_IRQ_ETHER_KITL % 32));
OEMKitlEnableClocks(FALSE);
#endif
break;
}
break;
}
// Finally call KITL library
rc = OALKitlInit(szDeviceId, pArgs, g_kitlDevices);
// If it failed or KITL is disabled
if (!rc || (pArgs->flags & OAL_KITL_FLAGS_ENABLED) == 0) goto cleanUp;
// enable kitl interrupts
s_bKitlActive = TRUE;
OEMKitlEnable(TRUE);
cleanUp:
KITL_RETAILMSG(ZONE_KITL_OAL, ("-OALKitlStart(rc = %d)\r\n", rc));
return rc;
}
BOOLEAN OEMGetUpdateMode(void)
{
BOOL *pfUpdateMode = NULL;
BSP_ARGS *iplpBSPArgs = ((BSP_ARGS *) IMAGE_SHARE_ARGS_UA_START);
BOOL fUpdateMode = iplpBSPArgs->fUpdateMode;
OALLog(L"OEMGetUpdateMode\r\n");
if(!fUpdateMode){
pfUpdateMode = (BOOL *) OALArgsQuery(OAL_ARGS_QUERY_UPDATEMODE);
if (pfUpdateMode == NULL)
{
OEMWriteDebugString(L"Invalid BSP Args - initializing to good values\r\n");
InitBSPArgs();
}
else
{
fUpdateMode = *pfUpdateMode;
}
}
else
{
// create the header
iplpBSPArgs->header.signature = OAL_ARGS_SIGNATURE;
iplpBSPArgs->header.oalVersion = OAL_ARGS_VERSION;
iplpBSPArgs->header.bspVersion = BSP_ARGS_VERSION;
RETAILMSG(1,(TEXT("updateTRUE but set ARG\r\n")));
}
if (fUpdateMode)
{
OEMWriteDebugString(L"Update Mode RAM flag is set\r\n");
}
else
{
// RAM flag is not set - are we recovering from power failure?
if (!BP_GetUpdateModeFlag(&fUpdateMode))
{
OEMWriteDebugString(L"Error in BP_GetUpdateModeFlag\r\n");
}
if (fUpdateMode)
{
OEMWriteDebugString(L"Update Mode Persistent flag is set\r\n");
}
}
if (fUpdateMode)
{
OEMWriteDebugString(L"----------------------------------------\r\n");
OEMWriteDebugString(L"--------------- LOAD ULDR --------------\r\n");
OEMWriteDebugString(L"----------------------------------------\r\n");
}
else
{
OEMWriteDebugString(L"----------------------------------------\r\n");
OEMWriteDebugString(L"--------------- LOAD OS --------------\r\n");
OEMWriteDebugString(L"----------------------------------------\r\n");
}
return(fUpdateMode);
}
//------------------------------------------------------------------------------
//
// Function: OALIoCtlHalGetDeviceId/OALIoCtlHalGetUUID
//
// Implements the IOCTL_HAL_GET_DEVICEID and IOCTL_HAL_GET_UUID handlers.
//
// A "universally unique" 128 bit identifier is required on all Windows
// Mobile devices. At a minimum, the 64 bit Device Identifier described
// below must be permanent (i.e., cannot be modified) and the UUID in
// total cannot duplicate any other existing UUID.
//
// The UUID is composed of 128 bits in the following order:
// * 48 bit Manufacturer Code stored in the OAL. The 48 bit Manufacturer
// Code is specific to the manufacturer and will be provided to each
// manufacturer by Microsoft.
// * 16 bit Version/Variant Code stored in the Kernel. The 16 bit
// Version/Variant Code describes the version and variant of the UUID.
// The version is "1" and the variant is "8".
// * 64 bit Device Identifier Code stored in the hardware (see
// Realization in OEM documentation). The Device Identifier Code
// must be stored in hardware and be un-alterable without destroying
// the device.
//
// There are two ways how to call this IOCTL. First will pass buffer with
// size 16 bytes (size of UUID structure). In such case
//
BOOL OALIoCtlHalGetDeviceId(
UINT32 code, VOID *pInpBuffer, UINT32 inpSize, VOID *pOutBuffer,
UINT32 outSize, UINT32 *pOutSize
) {
DEVICE_ID *pId = (DEVICE_ID *)pOutBuffer;
UINT32 size;
BOOL rc = FALSE;
int i;
#if defined SMARTFON || defined WPC // Smartphone or PocketPC build
// First, handle the special case where we care called with a buffer size of 16 bytes
if ( outSize == sizeof(UUID) )
{
rc = OALIoCtlHalGetUUID(IOCTL_HAL_GET_UUID, pInpBuffer, inpSize, pOutBuffer, outSize, pOutSize);
//for(i=0;i<outSize;i++)
// RETAILMSG(1,(TEXT(" %x \r\n"),*((BYTE *)pOutBuffer+i)));
}
else // If buffer size is not 16 bytes, return a DEVICE_ID structure
{
UCHAR uuid[sizeof(UUID)];
//RETAILMSG(1,(TEXT(" Large than 16 \r\n")));
// Compute required structure size
size = sizeof(DEVICE_ID) + sizeof(uuid);
// update size if pOutSize is specified
if (pOutSize != NULL)
{
*pOutSize = size;
}
// Check for invalid parameters
if (pOutBuffer == NULL || outSize < sizeof(DEVICE_ID))
{
NKSetLastError(ERROR_INVALID_PARAMETER);
OALMSG(OAL_WARN, (
L"WARN: OALIoCtlHalGetDeviceID: Invalid parameter\r\n"
));
goto cleanUp;
}
// Set size to DEVICE_ID structure
pId->dwSize = size;
// If the size is too small, indicate the correct size
if (outSize < size)
{
NKSetLastError(ERROR_INSUFFICIENT_BUFFER);
goto cleanUp;
}
// Get UUID
if (OALIoCtlHalGetUUID(IOCTL_HAL_GET_UUID, NULL, 0, uuid, sizeof(uuid), NULL) == FALSE)
{
// IOCTL_HAL_GET_UUID handler will set last error, but this really should never happen.
goto cleanUp;
}
// Populate DEVICE_ID structure members with fields from the UUID
// The manufacturer ID portion of the UUID maps to the "PresetIDBytes" field
// The HW-unique portion of the UUID maps to the "PlatformIDBytes" field
// PresetIDBytes
pId->dwPresetIDOffset = size - sizeof(g_oalIoCtlVendorId);
pId->dwPresetIDBytes = sizeof(g_oalIoCtlVendorId);
// PlatformIDBytes
pId->dwPlatformIDOffset = sizeof(DEVICE_ID);
pId->dwPlatformIDBytes = sizeof(uuid) - sizeof(g_oalIoCtlVendorId);
memcpy((UINT8*)pId + sizeof(DEVICE_ID), uuid, sizeof(uuid));
// We are done
rc = TRUE;
}
#else // Not Smartphone or PocketPC build
UINT32 length1, length2, offset;
LPSTR pDeviceId = NULL;
// Get device unique id from arguments
pDeviceId = OALArgsQuery(OAL_ARGS_QUERY_DEVID);
if (pDeviceId == NULL) pDeviceId = "";
// Compute required size (first is unicode, second multibyte!)
length1 = (NKwcslen(g_oalIoCtlPlatformType) + 1) * sizeof(WCHAR);
length2 = strlen(pDeviceId) + 1;
size = sizeof(DEVICE_ID) + length1 + length2;
// update size if pOutSize is specified
if (pOutSize) *pOutSize = size;
// Validate inputs (do it after we can return required size)
if (pOutBuffer == NULL || outSize < sizeof(DEVICE_ID)) {
NKSetLastError(ERROR_INVALID_PARAMETER);
OALMSG(OAL_WARN, (
L"WARN: OALIoCtlHalGetDeviceID: Invalid parameter\r\n"
));
goto cleanUp;
}
// Set size to DEVICE_ID structure
pId->dwSize = size;
// If the size is too small, indicate the correct size
if (outSize < size) {
NKSetLastError(ERROR_INSUFFICIENT_BUFFER);
goto cleanUp;
}
// Fill in the Device ID type
offset = sizeof(DEVICE_ID);
// Copy in PlatformType data
pId->dwPresetIDOffset = offset;
pId->dwPresetIDBytes = length1;
memcpy((UINT8*)pId + offset, g_oalIoCtlPlatformType, length1);
offset += length1;
// Copy device id data
pId->dwPlatformIDOffset = offset;
pId->dwPlatformIDBytes = length2;
memcpy((UINT8*)pId + offset, pDeviceId, length2);
// We are done
rc = TRUE;
#endif // SP/PPC build check
cleanUp:
return rc;
}