Beispiel #1
0
int Child(void *arg) {
    int     pid;
    int     state;
    int     status = 0;
    USLOSS_Console("Child\n");
    P1_DumpProcesses();
	pid = P1_Fork("Grandchild", Grandchild, NULL, USLOSS_MIN_STACK, 2);
    if (pid < 0) {
        USLOSS_Console("Unable to fork child: %d\n", pid);
        status = 1;
    } else {
        /*
         * Grandchild runs at priority 2, which is higher than ours. Part A is
         * run-to-completion, the grandchild should already have quit before
         * we get here.
         */
//	USLOSS_Console("Grandchild pid : %d,State=%d\n", pid,P1_GetState(pid));
        state = P1_GetState(pid);
        if (state != 3) { // grandchild should have quit
            USLOSS_Console("Grandchild is in invalid state: %d\n", state);
            status = 1;
        }
    }
    return status;
}
int P5_Startup(void *notused)
{
    	USLOSS_Console("P5_Startup\n");
	P1_Fork("P6_Startup", P6_Startup, NULL, 4 *  USLOSS_MIN_STACK, 1);
 	USLOSS_Console("P5_Finished\n");
	P1_DumpProcesses();
   	return 0;
}
int P3_Startup(void *notused) 
{
    	USLOSS_Console("P3_Startup\n");
    	P1_Fork("P5_Startup", P5_Startup, NULL, 4 *  USLOSS_MIN_STACK, 5);
 	int i;
	for (i = 0; i < 40; i++) {
    		P1_Fork("P4_Startup", P4_Startup, NULL, 4 *  USLOSS_MIN_STACK, 5);
	}	
	P1_DumpProcesses();
	int status = 2;
	int val = P1_Join(&status);
	printf("P1_Join return value: %d\n", val);
	P1_DumpProcesses();
    	P1_Fork("P8_Startup", P8_Startup, NULL, 4 *  USLOSS_MIN_STACK, 3);
	USLOSS_Console("P3_Finished\n");
	return 0; 
}
int P7_Startup(void *notused)
{
    USLOSS_Console("P7_Startup\n");
	P1_Quit(2);
    USLOSS_Console("P7_Finished\n");
    P1_DumpProcesses();
	
    return 0;
}
Beispiel #5
0
int P2_Startup(void *notused) 
{
    int pid;
    int status = 0;

    USLOSS_Console("P2_Startup\n");
    pid = P1_Fork("Child", Child, NULL, USLOSS_MIN_STACK, 3);
//    USLOSS_Console("Child pid : %d\n", pid);
if (pid < 0) {
        USLOSS_Console("Unable to fork child: %d\n", pid);
        status = 1;
    }
//	USLOSS_Console("in p2Startup");
	P1_DumpProcesses();
    return status;
}
void sysHandler(int type,void *arg) {
	if(arg == NULL){
		USLOSS_Console("USLOSS_Sysargs is NULL!\n");
		return;
	}
	USLOSS_Sysargs *sysArgs = (USLOSS_Sysargs *) arg;
	int retVal = 0;
	int retVal2 = 0;
	int sectSize = 0;
	int sectors = 0;
	int tracks = 0;
	interruptsOn();
	switch (sysArgs->number) {
	case SYS_TERMREAD:
		retVal = P2_TermRead((int)sysArgs->arg3, (int)sysArgs->arg2, sysArgs->arg1);
                if(retVal >= 0){
                        sysArgs->arg4 = (void *)0;
                        sysArgs->arg2 = (void *)retVal;
                }else{
                        sysArgs->arg4 = (void *)-1;
                }
                break;
	case SYS_TERMWRITE:
		retVal = P2_TermWrite((int)sysArgs->arg3,(int)sysArgs->arg2,(char *)sysArgs->arg1);
                if(retVal >= 0){
                        sysArgs->arg4 = (void *)0;
                        sysArgs->arg2 = (void *)retVal;
                }else{
                        sysArgs->arg4 = (void *)-1;
                }
		break;
	case SYS_SPAWN: //Part 1
		retVal = P2_Spawn(sysArgs->arg5, sysArgs->arg1, sysArgs->arg2,
				(int) sysArgs->arg3, (int) sysArgs->arg4);
		if (retVal == -3 || retVal == -2) {
			sysArgs->arg4 = (void *) -1;
			sysArgs->arg1 = (void *) -1;
		} else {
			sysArgs->arg1 = (void *) retVal;
			sysArgs->arg4 = (void *) 0;
		}
		break;
	case SYS_WAIT: //Part 1
		retVal = P2_Wait(&retVal2);
		if(retVal == -1){
			sysArgs->arg1 = (void *)-1;
			sysArgs->arg4 = (void *)-1;
			sysArgs->arg2 = (void *)-1;
		}else{
			sysArgs->arg1 = (void *)retVal;
			sysArgs->arg2 = (void *)retVal2;
			sysArgs->arg4 = (void *)0;
		}
		break;
	case SYS_TERMINATE: //Part 1
		P2_Terminate((int)sysArgs->arg1);
		break;
	case SYS_SLEEP: // Part 1
		retVal = P2_Sleep((int)sysArgs->arg1);
		sysArgs->arg4 = (void *) retVal;
		break;
	case SYS_DISKREAD:
		retVal = P2_DiskRead((int)sysArgs->arg5,(int)sysArgs->arg3,(int) sysArgs->arg4,(int)sysArgs->arg2,(void *)sysArgs->arg1);
                if (retVal == -1) {
                        sysArgs->arg1 = (void *)retVal;
                        sysArgs->arg4 = (void *)-1;
                }
                else if (retVal == 0) {
                        sysArgs->arg1 = (void *)0;
                        sysArgs->arg4 = (void *)0;
                }else {
                        sysArgs->arg1 = (void *)retVal; //output is the disk's status register
                        sysArgs->arg4 = (void *)0;
                }
		break;
	case SYS_DISKWRITE:
		retVal = P2_DiskWrite((int)sysArgs->arg5,(int)sysArgs->arg3,(int) sysArgs->arg4,(int)sysArgs->arg2,(void *)sysArgs->arg1);
		if (retVal == -1) {
			sysArgs->arg1 = (void *)retVal;
			sysArgs->arg4 = (void *)-1;
		}
		else if (retVal == 0) {
			sysArgs->arg1 = (void *)0;
			sysArgs->arg4 = (void *)0;
		}else {
			sysArgs->arg1 = (void *)retVal; //output is the disk's status register
			sysArgs->arg4 = (void *)0;
		}
		break;
	case SYS_DISKSIZE:
		retVal = P2_DiskSize((int)sysArgs->arg1,&sectSize,&sectors,&tracks);
		if (retVal == -1) {
			sysArgs->arg4 = (void *)-1;
		}else {
			sysArgs->arg4 = (void *)0;
			sysArgs->arg1 = (void *)sectSize;
			sysArgs->arg2 = (void *)sectors;
			sysArgs->arg3 = (void *)tracks;
		}
		break;
	case SYS_GETTIMEOFDAY: //Part 1
		sysArgs->arg1 = (void *)USLOSS_Clock();
		break;
	case SYS_CPUTIME: //Part 1
		sysArgs->arg1 = (void *)P1_ReadTime();
		break;
	case SYS_DUMPPROCESSES: //Part 1
		P1_DumpProcesses();
		break;
	case SYS_GETPID: //Part 1
		sysArgs->arg1 = (void *) P1_GetPID();
		break;
	case SYS_SEMCREATE: //Part 1
		retVal = (int)sysArgs->arg1;
		if(retVal < 0){
			sysArgs->arg4 = (void *)-1;
		}else{
			sysArgs->arg4 = (void *)0;
			sysArgs->arg1 = (void *) semAdd(P1_SemCreate(retVal));
		}
		break;
	case SYS_SEMP: // Part 1
		if(validSem((int)sysArgs->arg1) == 0){
			sysArgs->arg4 = (void *) -1;
			return;
		}
		retVal = P1_P(userSemList[(int)sysArgs->arg1].sem);
		if(retVal < 0){
			sysArgs->arg4 = (void *) -1;
		}
		else{
			sysArgs->arg4 = (void *) 0;
		}
		break;
	case SYS_SEMV: // Part 1
                if(validSem((int)sysArgs->arg1) == 0){
                        sysArgs->arg4 = (void *) -1;
                        return;
                }
		retVal = P1_V(userSemList[(int)sysArgs->arg1].sem);
		if(retVal < 0){
			sysArgs->arg4 = (void *) -1;
		}
		else{
			sysArgs->arg4 = (void *) 0;
		}
		break;
	case SYS_SEMFREE: // Part 1
                if(validSem((int)sysArgs->arg1) == 0){
                        sysArgs->arg4 = (void *) -1;
                        return;
                }
		
		retVal = semDelete((int)sysArgs->arg1);
		if(retVal < 0){
			sysArgs->arg4 = (void *) -1;
		}
		else{
			sysArgs->arg4 = (void *) 0;
		}
		break;
	case SYS_MBOXCREATE: //Part 1
		retVal = P2_MboxCreate((int)sysArgs->arg1,(int)sysArgs->arg2);
		if(retVal == -2){
			sysArgs->arg1 = (void *) -1;
			sysArgs->arg4 = (void *) -1;
		}else{
			sysArgs->arg1 = (void *) retVal;
			sysArgs->arg4 = (void *) 0;
		}
		break;
	case SYS_MBOXRELEASE: // Part 1
		retVal = P2_MboxRelease((int)sysArgs->arg1);
		if(retVal < 0){
			sysArgs->arg4 = (void *) -1;
		}else{
			sysArgs->arg4 = (void *) 0;
		}
		break;
	case SYS_MBOXSEND: // Part 1
		retVal = P2_MboxSend((int)sysArgs->arg1,sysArgs->arg2,(int *)&sysArgs->arg3);
		if(retVal < 0){
			sysArgs->arg4 = (void *) -1;
		}else{
			sysArgs->arg4 = (void *) 0;
		}
		break;
	case SYS_MBOXRECEIVE: // Part 1
                retVal = P2_MboxReceive((int)sysArgs->arg1,sysArgs->arg2,(int *)&sysArgs->arg3);
                if(retVal < 0){
                        sysArgs->arg4 = (void *) -1;
                }else{
                        sysArgs->arg4 = (void *) 0;
			sysArgs->arg2 = (void *) retVal;
                }
		break;
	case SYS_MBOXCONDSEND: // Part 1
                retVal = P2_MboxCondSend((int)sysArgs->arg1,sysArgs->arg2,(int *)&sysArgs->arg3);
                if(retVal == -1){
                        sysArgs->arg4 = (void *) -1;
                }else if(retVal == -2){
			sysArgs->arg4 = (void *) 1;
		}
		else{
                        sysArgs->arg4 = (void *) 0;
                }
		break;
	case SYS_MBOXCONDRECEIVE: // Part 1
                retVal = P2_MboxCondReceive((int)sysArgs->arg1,sysArgs->arg2,(int *)&sysArgs->arg3);
                if(retVal == -1){
                        sysArgs->arg4 = (void *) -1;
                }else if(retVal == -2){
                        sysArgs->arg4 = (void *) 1;
                }
                else{
                        sysArgs->arg4 = (void *) 0;
			sysArgs->arg2 = (void *) retVal;
                }
		break;
	default:
		P1_Quit(1);
	}
}