int main(void)
{
PaStreamParameters outputParameters;
PaStream *stream;
PaError err;
TestData data;
float writeBuffer[ FRAMES_PER_BUFFER * 2 ];
printf("PortAudio Test: check that stopping stream plays out all queued samples. SR = %d, BufSize = %d\n", SAMPLE_RATE, FRAMES_PER_BUFFER);
InitTestSignalGenerator( &data );
err = Pa_Initialize();
if( err != paNoError ) goto error;
outputParameters.device = Pa_GetDefaultOutputDevice(); /* default output device */
outputParameters.channelCount = 2; /* stereo output */
outputParameters.sampleFormat = paFloat32; /* 32 bit floating point output */
outputParameters.suggestedLatency = Pa_GetDeviceInfo( outputParameters.device )->defaultHighOutputLatency;
outputParameters.hostApiSpecificStreamInfo = NULL;
/* test paComplete ---------------------------------------------------------- */
ResetTestSignalGenerator( &data );
err = Pa_OpenStream(
&stream,
NULL, /* no input */
&outputParameters,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
paClipOff, /* we won't output out of range samples so don't bother clipping them */
TestCallback1,
&data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
printf("\nPlaying 'tone-blip' %d times using callback, stops by returning paComplete from callback.\n", NUM_REPEATS );
printf("If final blip is not intact, callback+paComplete implementation may be faulty.\n\n" );
while( (err = Pa_IsStreamActive( stream )) == 1 )
Pa_Sleep( 5 );
if( err != 0 ) goto error;
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
Pa_Sleep( 500 );
/* test Pa_StopStream() with callback --------------------------------------- */
ResetTestSignalGenerator( &data );
testCallback2Finished = 0;
err = Pa_OpenStream(
&stream,
NULL, /* no input */
&outputParameters,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
paClipOff, /* we won't output out of range samples so don't bother clipping them */
TestCallback2,
&data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
printf("\nPlaying 'tone-blip' %d times using callback, stops by calling Pa_StopStream.\n", NUM_REPEATS );
printf("If final blip is not intact, callback+Pa_StopStream implementation may be faulty.\n\n" );
/* note that polling a volatile flag is not a good way to synchronise with
the callback, but it's the best we can do portably. */
while( !testCallback2Finished )
Pa_Sleep( 2 );
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
Pa_Sleep( 500 );
/* test Pa_StopStream() with Pa_WriteStream --------------------------------- */
ResetTestSignalGenerator( &data );
err = Pa_OpenStream(
&stream,
NULL, /* no input */
&outputParameters,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
paClipOff, /* we won't output out of range samples so don't bother clipping them */
NULL, /* no callback, use blocking API */
NULL ); /* no callback, so no callback userData */
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
printf("\nPlaying 'tone-blip' %d times using Pa_WriteStream, stops by calling Pa_StopStream.\n", NUM_REPEATS );
printf("If final blip is not intact, Pa_WriteStream+Pa_StopStream implementation may be faulty.\n\n" );
do{
GenerateTestSignal( &data, writeBuffer, FRAMES_PER_BUFFER );
err = Pa_WriteStream( stream, writeBuffer, FRAMES_PER_BUFFER );
if( err != paNoError ) goto error;
}while( !IsTestSignalFinished( &data ) );
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
/* -------------------------------------------------------------------------- */
Pa_Terminate();
printf("Test finished.\n");
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}
PaStream *pa_dev_open(phastream_t *as, int output, char *name, int rate, int framesize, int latencymsecs)
{
PaStreamParameters inputParameters, outputParameters;
PaStream *stream;
PaError err;
char *in, *out;
static double standardSampleRates[] = {
8000.0, 9600.0, 11025.0, 12000.0, 16000.0, 22050.0, 24000.0, 32000.0,
44100.0, 48000.0, 88200.0, 96000.0, 192000.0, -1 /* negative terminated list */
};
int i;
int rateIndex;
double drate = (double) rate;
DBG_DYNA_AUDIO_DRV("phad_pa - pa_dev_open: asking for (name: \"%s\", rate: %d, framesize: %d)\n", name, rate, framesize);
if (!strncasecmp(name, "pa:", 3))
{
name += 3;
}
if ((in = strstr(name,"IN=")) != NULL)
{
inputParameters.device = atoi(in + 3);
}
else
{
inputParameters.device = Pa_GetDefaultInputDevice();
if (inputParameters.device == paNoDevice)
{
return 0;
}
}
if ((out = strstr(name,"OUT=")))
{
outputParameters.device = atoi(out + 4);
}
else
{
outputParameters.device = Pa_GetDefaultOutputDevice();
if (outputParameters.device == paNoDevice)
{
return 0;
}
}
DBG_DYNA_AUDIO_DRV("pa_dev_open: PA Input %d, PA Output %d\n", inputParameters.device, outputParameters.device);
inputParameters.channelCount = 1;
inputParameters.sampleFormat = paInt16;
inputParameters.suggestedLatency = Pa_GetDeviceInfo(inputParameters.device)->defaultLowInputLatency; // latencymsecs / 1000.0;
// if (inputParameters.suggestedLatency == 0.0)
inputParameters.suggestedLatency = latencymsecs / 1000.0;
inputParameters.hostApiSpecificStreamInfo = 0;
outputParameters.channelCount = 1;
outputParameters.sampleFormat = paInt16;
outputParameters.suggestedLatency = Pa_GetDeviceInfo(outputParameters.device)->defaultLowOutputLatency;
// if (outputParameters.suggestedLatency == 0.0)
outputParameters.suggestedLatency = latencymsecs / 1000.0;
outputParameters.hostApiSpecificStreamInfo = 0;
DBG_DYNA_AUDIO_DRV("pa_dev_open: using latencies in = %d ms, out = %d ms\n", (int) (inputParameters.suggestedLatency * 1000.0),
(int) (outputParameters.suggestedLatency * 1000.0));
/* find the nearest matching entry in the table */
rateIndex = -1;
for (i = 0; standardSampleRates[i] > 0; i++ )
{
if (drate <= standardSampleRates[i])
{
rateIndex = i;
break;
}
}
if (rateIndex == -1)
{
return 0;
}
/* check if the initial match is accepted */
err = Pa_IsFormatSupported( &inputParameters, &outputParameters, standardSampleRates[rateIndex] );
if ( err == paFormatIsSupported )
{
as->actual_rate = (int) standardSampleRates[rateIndex];
}
else
{
/* find a sampling rate that IS accepted */
i = rateIndex + 1;
rateIndex = -1;
for (i = 0; standardSampleRates[i] > 0; i++ )
{
err = Pa_IsFormatSupported( &inputParameters, &outputParameters, standardSampleRates[i] );
if ( err == paFormatIsSupported )
{
rateIndex = i;
break;
}
}
if (rateIndex == -1)
{
return 0;
}
}
as->actual_rate = (int) standardSampleRates[rateIndex];
/* we need to recalculate the frame size? */
if (rate != as->actual_rate)
{
int frameDuration = 1000 * (framesize / 2) / rate;
framesize = frameDuration * as->actual_rate / 1000 * 2;
}
DBG_DYNA_AUDIO_DRV("pa_dev_open: chosen rate (freq, framesize)=(%d,%d)\n",
as->actual_rate,
framesize);
if (output)
{
err = Pa_OpenStream(
&stream,
(output == PH_PA_INOUT) ? &inputParameters : 0,
&outputParameters,
standardSampleRates[rateIndex],
framesize / 2,
0, /* paClipOff, */ /* we won't output out of range samples so don't bother clipping them */
(output == PH_PA_INOUT) ? ph_pa_callback : ph_pa_ocallback,
as );
}
else
{
err = Pa_OpenStream(
&stream,
&inputParameters,
0,
standardSampleRates[rateIndex],
framesize / 2,
0, /* paClipOff, */ /* we won't output out of range samples so don't bother clipping them */
ph_pa_icallback,
as );
}
if( err != paNoError )
{
return 0;
}
return stream;
}
int main(void)
{
char pad[256];
PortAudioStream *stream;
PaError err;
const PaDeviceInfo *pdi;
paTestData data = {0};
printf("PortAudio Test: output sine wave on each channel.\n" );
err = Pa_Initialize();
if( err != paNoError ) goto error;
pdi = Pa_GetDeviceInfo( OUTPUT_DEVICE );
data.numChannels = pdi->maxOutputChannels;
if( data.numChannels > MAX_CHANNELS ) data.numChannels = MAX_CHANNELS;
printf("Number of Channels = %d\n", data.numChannels );
data.amplitude = 1.0;
err = Pa_OpenStream(
&stream,
paNoDevice, /* default input device */
0, /* no input */
paFloat32, /* 32 bit floating point input */
NULL,
OUTPUT_DEVICE,
data.numChannels,
paFloat32, /* 32 bit floating point output */
NULL,
SAMPLE_RATE,
FRAMES_PER_BUFFER, /* frames per buffer */
0, /* number of buffers, if zero then use default minimum */
paClipOff, /* we won't output out of range samples so don't bother clipping them */
patestCallback,
&data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
do
{
printf("Current amplitude = %f\n", data.amplitude );
printf("Enter new amplitude or 'q' to quit.\n");
fflush(stdout);
gets( pad );
if( pad[0] != 'q' )
{
// I tried to use atof but it seems to be broken on Mac OS X 10.1
float amp;
sscanf( pad, "%f", & );
data.amplitude = amp;
}
} while( pad[0] != 'q' );
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
Pa_CloseStream( stream );
Pa_Terminate();
printf("Test finished.\n");
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}
bool audio_init(audio_t *a, size_t sample_rate, size_t n_channels, size_t samples_per_chunk)
{
//***Initialize PA internal data structures******
if(Pa_Initialize() != paNoError)
return false;
size_t frames_per_buffer = samples_per_chunk / n_channels;
//******Initialize input device*******
PaStreamParameters inparams;
PaDeviceIndex dev;
PaTime lat;
dev = Pa_GetDefaultInputDevice();
if(dev == paNoDevice)
return false;
lat = Pa_GetDeviceInfo(dev)->defaultLowInputLatency;
inparams = (PaStreamParameters) {
.device = dev,
.channelCount = n_channels,
.sampleFormat = paInt16,
.suggestedLatency = lat,
.hostApiSpecificStreamInfo = NULL
};
//******Initialize output device*******
PaStreamParameters outparams;
//**************
dev = Pa_GetDefaultOutputDevice();
if(dev == paNoDevice)
return false;
lat = Pa_GetDeviceInfo(dev)->defaultLowInputLatency;
outparams = (PaStreamParameters) {
.device = dev,
.channelCount = n_channels,
.sampleFormat = paInt16,
.suggestedLatency = lat,
.hostApiSpecificStreamInfo = NULL
};
//********Open play stream*******
PaStream *pstream=NULL;
if(Pa_OpenStream(
&pstream,
NULL,
&outparams,
sample_rate,
frames_per_buffer,
paClipOff,
playCallback,
a) != paNoError) return false; //**************
//********Open record and listen stream*******
PaStream *rstream=NULL;
if(Pa_OpenStream(
&rstream,
&inparams,
NULL,
sample_rate,
frames_per_buffer,
paClipOff,
recordCallback,
a) != paNoError) return false;
//*****Initialize communication ring buffers********************
PaUtilRingBuffer rb;
void *rb_data;
size_t rb_size;
rb_size = 1 << (sizeof(samples_per_chunk) * CHAR_BIT - __builtin_clz(samples_per_chunk * RB_MULTIPLIER));
rb_data = malloc(sizeof(audio_sample_t) * rb_size);
PaUtil_InitializeRingBuffer(&rb, sizeof(audio_sample_t), rb_size, rb_data);
*a = (audio_t) {
.sample_rate = sample_rate,
.n_channels = n_channels,
.samples_per_chunk = samples_per_chunk,
.pstream = pstream,
.rstream = rstream,
.wakeup = false,
.wakeup_sig = PTHREAD_COND_INITIALIZER,
.wakeup_mutex = PTHREAD_MUTEX_INITIALIZER,
.flags = DEFAULT,
.prbuf = NULL,
.prbuf_size = 0,
.prbuf_offset = 0,
.rb = rb,
.rb_data = rb_data
};
return true;
}
void audio_destroy(audio_t *a)
{
Pa_CloseStream(a->pstream);
Pa_CloseStream(a->rstream);
Pa_Terminate();
pthread_cond_destroy(&a->wakeup_sig);
pthread_mutex_destroy(&a->wakeup_mutex);
audio_clear(a);
free(a->rb_data);
}
/* -- main function -- */
int main( int argc, char **argv ) {
PaStreamParameters inputParameters;
float a[2], b[3], mem1[4], mem2[4];
float data[FFT_SIZE];
float datai[FFT_SIZE];
float window[FFT_SIZE];
float freqTable[FFT_SIZE];
char * noteNameTable[FFT_SIZE];
float notePitchTable[FFT_SIZE];
void * fft = NULL;
PaStream *stream = NULL;
PaError err = 0;
struct sigaction action;
// add signal listen so we know when to exit:
action.sa_handler = signalHandler;
sigemptyset (&action.sa_mask);
action.sa_flags = 0;
sigaction (SIGINT, &action, NULL);
sigaction (SIGHUP, &action, NULL);
sigaction (SIGTERM, &action, NULL);
// build the window, fft, etc
/*
buildHanWindow( window, 30 );
for( int i=0; i<30; ++i ) {
for( int j=0; j<window[i]*50; ++j )
printf( "*" );
printf("\n");
}
exit(0);
*/
buildHanWindow( window, FFT_SIZE );
fft = initfft( FFT_EXP_SIZE );
computeSecondOrderLowPassParameters( SAMPLE_RATE, 330, a, b );
mem1[0] = 0;
mem1[1] = 0;
mem1[2] = 0;
mem1[3] = 0;
mem2[0] = 0;
mem2[1] = 0;
mem2[2] = 0;
mem2[3] = 0;
//freq/note tables
for( int i=0; i<FFT_SIZE; ++i ) {
freqTable[i] = ( SAMPLE_RATE * i ) / (float) ( FFT_SIZE );
}
for( int i=0; i<FFT_SIZE; ++i ) {
noteNameTable[i] = NULL;
notePitchTable[i] = -1;
}
for( int i=0; i<127; ++i ) {
float pitch = ( 440.0 / 32.0 ) * pow( 2, (i-9.0)/12.0 ) ;
if( pitch > SAMPLE_RATE / 2.0 )
break;
//find the closest frequency using brute force.
float min = 1000000000.0;
int index = -1;
for( int j=0; j<FFT_SIZE; ++j ) {
if( fabsf( freqTable[j]-pitch ) < min ) {
min = fabsf( freqTable[j]-pitch );
index = j;
}
}
noteNameTable[index] = NOTES[i%12];
notePitchTable[index] = pitch;
//printf( "%f %d %s\n", pitch, index, noteNameTable[index] );
}
// initialize portaudio
err = Pa_Initialize();
if( err != paNoError ) goto error;
inputParameters.device = Pa_GetDefaultInputDevice();
inputParameters.channelCount = 1;
inputParameters.sampleFormat = paFloat32;
inputParameters.suggestedLatency = Pa_GetDeviceInfo( inputParameters.device )->defaultHighInputLatency ;
inputParameters.hostApiSpecificStreamInfo = NULL;
printf( "Opening %s\n",
Pa_GetDeviceInfo( inputParameters.device )->name );
err = Pa_OpenStream( &stream,
&inputParameters,
NULL, //no output
SAMPLE_RATE,
FFT_SIZE,
paClipOff,
NULL,
NULL );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
// this is the main loop where we listen to and
// process audio.
while( running )
{
// read some data
err = Pa_ReadStream( stream, data, FFT_SIZE );
if( err ) goto error; //FIXME: we don't want to err on xrun
// low-pass
//for( int i=0; i<FFT_SIZE; ++i )
// printf( "in %f\n", data[i] );
for( int j=0; j<FFT_SIZE; ++j ) {
data[j] = processSecondOrderFilter( data[j], mem1, a, b );
data[j] = processSecondOrderFilter( data[j], mem2, a, b );
}
// window
applyWindow( window, data, FFT_SIZE );
// do the fft
for( int j=0; j<FFT_SIZE; ++j )
datai[j] = 0;
applyfft( fft, data, datai, false );
//find the peak
float maxVal = -1;
int maxIndex = -1;
for( int j=0; j<FFT_SIZE/2; ++j ) {
float v = data[j] * data[j] + datai[j] * datai[j] ;
/*
printf( "%d: ", j*SAMPLE_RATE/(2*FFT_SIZE) );
for( int i=0; i<sqrt(v)*100000000; ++i )
printf( "*" );
printf( "\n" );
*/
if( v > maxVal ) {
maxVal = v;
maxIndex = j;
}
}
float freq = freqTable[maxIndex];
//find the nearest note:
int nearestNoteDelta=0;
while( true ) {
if( nearestNoteDelta < maxIndex && noteNameTable[maxIndex-nearestNoteDelta] != NULL ) {
nearestNoteDelta = -nearestNoteDelta;
break;
} else if( nearestNoteDelta + maxIndex < FFT_SIZE && noteNameTable[maxIndex+nearestNoteDelta] != NULL ) {
break;
}
++nearestNoteDelta;
}
char * nearestNoteName = noteNameTable[maxIndex+nearestNoteDelta];
float nearestNotePitch = notePitchTable[maxIndex+nearestNoteDelta];
float centsSharp = 1200 * log( freq / nearestNotePitch ) / log( 2.0 );
// now output the results:
printf("\033[2J\033[1;1H"); //clear screen, go to top left
fflush(stdout);
printf( "Tuner listening. Control-C to exit.\n" );
printf( "%f Hz, %d : %f\n", freq, maxIndex, maxVal*1000 );
printf( "Nearest Note: %s\n", nearestNoteName );
if( nearestNoteDelta != 0 ) {
if( centsSharp > 0 )
printf( "%f cents sharp.\n", centsSharp );
if( centsSharp < 0 )
printf( "%f cents flat.\n", -centsSharp );
} else {
printf( "in tune!\n" );
}
printf( "\n" );
int chars = 30;
if( nearestNoteDelta == 0 || centsSharp >= 0 ) {
for( int i=0; i<chars; ++i )
printf( " " );
} else {
for( int i=0; i<chars+centsSharp; ++i )
printf( " " );
for( int i=chars+centsSharp<0?0:chars+centsSharp; i<chars; ++i )
printf( "=" );
}
printf( " %2s ", nearestNoteName );
if( nearestNoteDelta != 0 )
for( int i=0; i<chars && i<centsSharp; ++i )
printf( "=" );
printf("\n");
}
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
// cleanup
destroyfft( fft );
Pa_Terminate();
return 0;
error:
if( stream ) {
Pa_AbortStream( stream );
Pa_CloseStream( stream );
}
destroyfft( fft );
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return 1;
}
int main(void)
{
PaStream *stream;
PaStreamParameters outputParameters;
PaError err;
paTestData data;
int i;
printf("Play different tone sine waves that alternate between left and right channel.\n");
printf("The low tone should be on the left channel.\n");
/* initialise sinusoidal wavetable */
for( i=0; i<TABLE_SIZE; i++ )
{
data.sine[i] = (float) sin( ((double)i/(double)TABLE_SIZE) * M_PI * 2. );
}
data.left_phase = data.right_phase = 0;
data.currentBalance = 0.0;
data.targetBalance = 0.0;
err = Pa_Initialize();
if( err != paNoError ) goto error;
outputParameters.device = Pa_GetDefaultOutputDevice(); /* default output device */
if (outputParameters.device == paNoDevice) {
fprintf(stderr,"Error: No default output device.\n");
goto error;
}
outputParameters.channelCount = 2; /* stereo output */
outputParameters.sampleFormat = paFloat32; /* 32 bit floating point output */
outputParameters.suggestedLatency = Pa_GetDeviceInfo( outputParameters.device )->defaultLowOutputLatency;
outputParameters.hostApiSpecificStreamInfo = NULL;
err = Pa_OpenStream( &stream,
NULL, /* No input. */
&outputParameters, /* As above. */
SAMPLE_RATE,
FRAMES_PER_BUFFER,
paClipOff, /* we won't output out of range samples so don't bother clipping them */
patestCallback,
&data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
printf("Play for several seconds.\n");
for( i=0; i<4; i++ )
{
printf("Hear low sound on left side.\n");
data.targetBalance = 0.01;
Pa_Sleep( 1000 );
printf("Hear high sound on right side.\n");
data.targetBalance = 0.99;
Pa_Sleep( 1000 );
}
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
printf("Test finished.\n");
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}
int main(void)
{
PaStreamParameters inputParameters,
outputParameters;
PaStream* stream;
PaError err = paNoError;
paTestData data;
int i;
int totalFrames;
int numSamples;
int numBytes;
SAMPLE max, val;
double average;
printf("patest_record.c\n"); fflush(stdout);
data.maxFrameIndex = totalFrames = NUM_SECONDS * SAMPLE_RATE; /* Record for a few seconds. */
data.frameIndex = 0;
numSamples = totalFrames * NUM_CHANNELS;
numBytes = numSamples * sizeof(SAMPLE);
data.recordedSamples = (SAMPLE *) malloc( numBytes ); /* From now on, recordedSamples is initialised. */
if( data.recordedSamples == NULL )
{
printf("Could not allocate record array.\n");
goto done;
}
for( i=0; i<numSamples; i++ ) data.recordedSamples[i] = 0;
err = Pa_Initialize();
if( err != paNoError ) goto done;
inputParameters.device = Pa_GetDefaultInputDevice(); /* default input device */
if (inputParameters.device == paNoDevice) {
fprintf(stderr,"Error: No default input device.\n");
goto done;
}
inputParameters.channelCount = 2; /* stereo input */
inputParameters.sampleFormat = PA_SAMPLE_TYPE;
inputParameters.suggestedLatency = Pa_GetDeviceInfo( inputParameters.device )->defaultLowInputLatency;
inputParameters.hostApiSpecificStreamInfo = NULL;
/* Record some audio. -------------------------------------------- */
err = Pa_OpenStream(
&stream,
&inputParameters,
NULL, /* &outputParameters, */
SAMPLE_RATE,
FRAMES_PER_BUFFER,
paClipOff, /* we won't output out of range samples so don't bother clipping them */
recordCallback,
&data );
if( err != paNoError ) goto done;
err = Pa_StartStream( stream );
if( err != paNoError ) goto done;
printf("\n=== Now recording!! Please speak into the microphone. ===\n"); fflush(stdout);
while( ( err = Pa_IsStreamActive( stream ) ) == 1 )
{
Pa_Sleep(1000);
printf("index = %d\n", data.frameIndex ); fflush(stdout);
}
if( err < 0 ) goto done;
err = Pa_CloseStream( stream );
if( err != paNoError ) goto done;
/* Measure maximum peak amplitude. */
max = 0;
average = 0.0;
for( i=0; i<numSamples; i++ )
{
val = data.recordedSamples[i];
if( val < 0 ) val = -val; /* ABS */
if( val > max )
{
max = val;
}
average += val;
}
average = average / (double)numSamples;
printf("sample max amplitude = "PRINTF_S_FORMAT"\n", max );
printf("sample average = %lf\n", average );
/* Write recorded data to a file. */
#if WRITE_TO_FILE
{
FILE *fid;
fid = fopen("recorded.raw", "wb");
if( fid == NULL )
{
printf("Could not open file.");
}
else
{
fwrite( data.recordedSamples, NUM_CHANNELS * sizeof(SAMPLE), totalFrames, fid );
fclose( fid );
printf("Wrote data to 'recorded.raw'\n");
}
}
#endif
/* Playback recorded data. -------------------------------------------- */
data.frameIndex = 0;
outputParameters.device = Pa_GetDefaultOutputDevice(); /* default output device */
if (outputParameters.device == paNoDevice) {
fprintf(stderr,"Error: No default output device.\n");
goto done;
}
outputParameters.channelCount = 2; /* stereo output */
outputParameters.sampleFormat = PA_SAMPLE_TYPE;
outputParameters.suggestedLatency = Pa_GetDeviceInfo( outputParameters.device )->defaultLowOutputLatency;
outputParameters.hostApiSpecificStreamInfo = NULL;
printf("\n=== Now playing back. ===\n"); fflush(stdout);
err = Pa_OpenStream(
&stream,
NULL, /* no input */
&outputParameters,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
paClipOff, /* we won't output out of range samples so don't bother clipping them */
playCallback,
&data );
if( err != paNoError ) goto done;
if( stream )
{
err = Pa_StartStream( stream );
if( err != paNoError ) goto done;
printf("Waiting for playback to finish.\n"); fflush(stdout);
while( ( err = Pa_IsStreamActive( stream ) ) == 1 ) Pa_Sleep(100);
if( err < 0 ) goto done;
err = Pa_CloseStream( stream );
if( err != paNoError ) goto done;
printf("Done.\n"); fflush(stdout);
}
done:
Pa_Terminate();
if( data.recordedSamples ) /* Sure it is NULL or valid. */
free( data.recordedSamples );
if( err != paNoError )
{
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
err = 1; /* Always return 0 or 1, but no other return codes. */
}
return err;
}
// print the audio device to stdout.
static void printDeviceInfo( int device )
{
const PaDeviceInfo *pdi;
bool defaultDisplayed = false;
pdi = Pa_GetDeviceInfo( device );
if( pdi != NULL )
{
messagePrintf( ( "\n" ) );
if( device == Pa_GetDefaultInputDevice() )
{
messagePrintf( ( "[ Default Input" ) );
defaultDisplayed = true;
}
else if( device == Pa_GetHostApiInfo( pdi->hostApi )->defaultInputDevice )
{
const PaHostApiInfo *phai = Pa_GetHostApiInfo( pdi->hostApi );
messagePrintf( ( "[ Default %s Input", phai->name ) );
defaultDisplayed = true;
}
if( device == Pa_GetDefaultOutputDevice() )
{
messagePrintf( ( ( defaultDisplayed ? "," : "[") ) );
messagePrintf( ( " Default Output" ) );
defaultDisplayed = true;
}
else if( device == Pa_GetHostApiInfo( pdi->hostApi )->defaultOutputDevice )
{
const PaHostApiInfo *phai = Pa_GetHostApiInfo( pdi->hostApi );
messagePrintf( ( ( defaultDisplayed ? "," : "[") ) );
messagePrintf( ( " Default %s Output", phai->name ) );
defaultDisplayed = true;
}
if( defaultDisplayed )
messagePrintf( ( " ]\n" ) );
messagePrintf( ( ""
"Device %d name: %s\n"
"Host API name: %s\n"
"Max input channels: %d, Max output channels: %d\n"
"Default input latency: %8.4f(low) - %8.4f(high)\n"
"Default output latency: %8.4f(low) - %8.4f(high)\n"
"Default sample rate: %8.2f\n",
device, pdi->name,
Pa_GetHostApiInfo( pdi->hostApi )->name,
pdi->maxInputChannels, pdi->maxOutputChannels,
pdi->defaultLowInputLatency, pdi->defaultHighInputLatency,
pdi->defaultLowOutputLatency, pdi->defaultHighOutputLatency,
pdi->defaultSampleRate ) );
if( true ) // Print supported standard sample rates
{
PaStreamParameters inputParameters, outputParameters;
inputParameters.device = device;
inputParameters.channelCount = pdi->maxInputChannels;
inputParameters.sampleFormat = paInt16; // default only
inputParameters.suggestedLatency = 0;
inputParameters.hostApiSpecificStreamInfo = NULL;
outputParameters.device = device;
outputParameters.channelCount = pdi->maxOutputChannels;
outputParameters.sampleFormat = paInt16; // default only
outputParameters.suggestedLatency = 0;
outputParameters.hostApiSpecificStreamInfo = NULL;
if( inputParameters.channelCount > 0 )
{
messagePrintf( ( "Supported standard sample rates input.\n" ) );
printSupportedStandardSampleRates( &inputParameters, NULL );
}
if( outputParameters.channelCount > 0 )
{
messagePrintf( ( "Supported standard sample rates output.\n" ) );
printSupportedStandardSampleRates( NULL, &outputParameters );
}
if( inputParameters.channelCount > 0 && outputParameters.channelCount > 0 )
{
messagePrintf( ( "Supported standard sample rates input/output.\n" ) );
printSupportedStandardSampleRates( &inputParameters, &outputParameters );
}
}
}
}
Audio::Audio(Oscilloscope* scope, int16_t initialJitterBufferSamples) :
_stream(NULL),
_ringBuffer(true),
_scope(scope),
_averagedLatency(0.0),
_measuredJitter(0),
_jitterBufferSamples(initialJitterBufferSamples),
_wasStarved(0),
_numStarves(0),
_lastInputLoudness(0),
_lastVelocity(0),
_lastAcceleration(0),
_totalPacketsReceived(0),
_firstPacketReceivedTime(),
_packetsReceivedThisPlayback(0),
_echoSamplesLeft(NULL),
_isSendingEchoPing(false),
_pingAnalysisPending(false),
_pingFramesToRecord(0),
_samplesLeftForFlange(0),
_lastYawMeasuredMaximum(0),
_flangeIntensity(0.0f),
_flangeRate(0.0f),
_flangeWeight(0.0f),
_collisionSoundMagnitude(0.0f),
_collisionSoundFrequency(0.0f),
_collisionSoundNoise(0.0f),
_collisionSoundDuration(0.0f),
_proceduralEffectSample(0),
_heartbeatMagnitude(0.0f),
_listenMode(AudioRingBuffer::NORMAL),
_listenRadius(0.0f)
{
outputPortAudioError(Pa_Initialize());
// NOTE: Portaudio documentation is unclear as to whether it is safe to specify the
// number of frames per buffer explicitly versus setting this value to zero.
// Possible source of latency that we need to investigate further.
//
unsigned long FRAMES_PER_BUFFER = BUFFER_LENGTH_SAMPLES_PER_CHANNEL;
// Manually initialize the portaudio stream to ask for minimum latency
PaStreamParameters inputParameters, outputParameters;
inputParameters.device = Pa_GetDefaultInputDevice();
outputParameters.device = Pa_GetDefaultOutputDevice();
if (inputParameters.device == -1 || outputParameters.device == -1) {
qDebug("Audio: Missing device.\n");
outputPortAudioError(Pa_Terminate());
return;
}
inputParameters.channelCount = 2; // Stereo input
inputParameters.sampleFormat = (paInt16 | paNonInterleaved);
inputParameters.suggestedLatency = Pa_GetDeviceInfo(inputParameters.device)->defaultLowInputLatency;
inputParameters.hostApiSpecificStreamInfo = NULL;
outputParameters.channelCount = 2; // Stereo output
outputParameters.sampleFormat = (paInt16 | paNonInterleaved);
outputParameters.suggestedLatency = Pa_GetDeviceInfo(outputParameters.device)->defaultLowOutputLatency;
outputParameters.hostApiSpecificStreamInfo = NULL;
outputPortAudioError(Pa_OpenStream(&_stream,
&inputParameters,
&outputParameters,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
paNoFlag,
audioCallback,
(void*) this));
if (! _stream) {
return;
}
_echoSamplesLeft = new int16_t[AEC_BUFFERED_SAMPLES + AEC_TMP_BUFFER_SIZE];
memset(_echoSamplesLeft, 0, AEC_BUFFERED_SAMPLES * sizeof(int16_t));
// start the stream now that sources are good to go
outputPortAudioError(Pa_StartStream(_stream));
// Uncomment these lines to see the system-reported latency
//qDebug("Default low input, output latency (secs): %0.4f, %0.4f\n",
// Pa_GetDeviceInfo(Pa_GetDefaultInputDevice())->defaultLowInputLatency,
// Pa_GetDeviceInfo(Pa_GetDefaultOutputDevice())->defaultLowOutputLatency);
const PaStreamInfo* streamInfo = Pa_GetStreamInfo(_stream);
qDebug("Started audio with reported latency msecs In/Out: %.0f, %.0f\n", streamInfo->inputLatency * 1000.f,
streamInfo->outputLatency * 1000.f);
gettimeofday(&_lastReceiveTime, NULL);
}
bool Portaudio::init()
{
PaError err = Pa_Initialize();
if (err != paNoError) {
qDebug("Portaudio initialize failed: %s", Pa_GetErrorText(err));
return false;
}
initialized = true;
if (MScore::debugMode)
qDebug("using PortAudio Version: %s", Pa_GetVersionText());
PaDeviceIndex idx = preferences.portaudioDevice;
if (idx < 0)
idx = Pa_GetDefaultOutputDevice();
const PaDeviceInfo* di = Pa_GetDeviceInfo(idx);
if (di == nullptr)
di = Pa_GetDeviceInfo(Pa_GetDefaultOutputDevice());
_sampleRate = int(di->defaultSampleRate);
/* Open an audio I/O stream. */
struct PaStreamParameters out;
memset(&out, 0, sizeof(out));
out.device = idx;
out.channelCount = 2;
out.sampleFormat = paFloat32;
#ifdef Q_OS_MAC
out.suggestedLatency = 0.020;
#else // on windows, this small latency causes some problem
out.suggestedLatency = 0.100;
#endif
out.hostApiSpecificStreamInfo = 0;
err = Pa_OpenStream(&stream, 0, &out, double(_sampleRate), 0, 0, paCallback, (void*)this);
if (err != paNoError) {
// fall back to default device:
out.device = Pa_GetDefaultOutputDevice();
err = Pa_OpenStream(&stream, 0, &out, double(_sampleRate), 0, 0, paCallback, (void*)this);
if (err != paNoError) {
qDebug("Portaudio open stream %d failed: %s", idx, Pa_GetErrorText(err));
return false;
}
}
const PaStreamInfo* si = Pa_GetStreamInfo(stream);
if (si)
_sampleRate = int(si->sampleRate);
#ifdef USE_ALSA
midiDriver = new AlsaMidiDriver(seq);
#endif
#ifdef USE_PORTMIDI
midiDriver = new PortMidiDriver(seq);
#endif
if (midiDriver && !midiDriver->init()) {
qDebug("Init midi driver failed");
delete midiDriver;
midiDriver = 0;
#ifdef USE_PORTMIDI
return true; // return OK for audio driver; midi is only input
#else
return false;
#endif
}
return true;
}
int audioPlayRec( int playdevID, SAMPLE * playbuffer, int playbuflen, int playbuffirstchannel, int playbuflastchannel, int recdevID, SAMPLE * recbuffer, int recbuflen, int recbuffirstchannel, int recbuflastchannel, char * recCallbackName, int samplerate )
{
paAudioData audio;
mxArray * precRingArray = NULL;
audio.recMode = PLAYREC_NONE;
audio.playBuffer = NULL;
audio.playBufLen = 0;
audio.playBufPos = 0;
audio.playFirstChannel = 0;
audio.playChannels = 0;
audio.playDevChannels = 0;
audio.recBuffer = NULL;
audio.recBufLen = 0;
audio.recBufWritePos = 0;
audio.recBufReadPos = 0;
audio.recFirstChannel = 0;
audio.recChannels = 0;
audio.recDevChannels = 0;
if( playdevID != paNoDevice && playbuffer != NULL && playbuflen > 0 && playbuffirstchannel >= 0 && playbuflastchannel >= playbuffirstchannel )
{
int playChannels = playbuflastchannel - playbuffirstchannel + 1;
audio.recMode |= PLAYREC_PLAY;
audio.playBuffer = playbuffer;
audio.playBufLen = playbuflen / playChannels; // just only one channel samples
audio.playFirstChannel = playbuffirstchannel;
audio.playChannels = playChannels;
}
if( recdevID != paNoDevice && playbuffirstchannel >= 0 && recbuflastchannel >= recbuffirstchannel )
{
int recChannels = recbuflastchannel - recbuffirstchannel + 1;
if( recbuffer != NULL && recbuflen > 0 )
{
audio.recMode |= PLAYREC_REC;
audio.recBuffer = recbuffer;
audio.recBufLen = recbuflen / recChannels; // just only one channel samples
audio.recFirstChannel = recbuffirstchannel;
audio.recChannels = recChannels;
}
else if( recCallbackName != NULL )
{
int recBufferLength = samplerate * 2; // 2 seconds ring buffer
precRingArray = mxCreateNumericMatrix( recBufferLength, recChannels, SAMPLE_CLASSID, mxREAL );
SAMPLE * recBuf = (SAMPLE *)mxGetData( precRingArray );
if( recBuf != NULL )
{
audio.recMode |= PLAYREC_REC;
audio.recBuffer = recBuf;
audio.recBufLen = recBufferLength; // just only one channel samples
audio.recFirstChannel = recbuffirstchannel;
audio.recChannels = recChannels;
}
}
}
if( audio.recMode == PLAYREC_NONE )
{
errorPrintf( ( "Playback and Recording parameters is wrong!\n" ) );
return paNoError;
}
PaStreamParameters inputParameters, outputParameters;
PaStreamParameters *pinputParameters, *poutputParameters;
PaStream *stream;
PaError err;
err = Pa_Initialize();
if( err != paNoError )
goto error;
if( audio.recMode & PLAYREC_PLAY )
{
poutputParameters = &outputParameters;
outputParameters.device = playdevID;
outputParameters.channelCount = Pa_GetDeviceInfo( outputParameters.device )->maxOutputChannels;
outputParameters.sampleFormat = SAMPLE_FORMAT;
outputParameters.suggestedLatency = Pa_GetDeviceInfo( outputParameters.device )->defaultLowOutputLatency;
outputParameters.hostApiSpecificStreamInfo = NULL;
audio.playDevChannels = outputParameters.channelCount;
}
else
poutputParameters = NULL;
if( audio.recMode & PLAYREC_REC )
{
pinputParameters = &inputParameters;
inputParameters.device = recdevID;
inputParameters.channelCount = Pa_GetDeviceInfo( inputParameters.device )->maxInputChannels;
inputParameters.sampleFormat = SAMPLE_FORMAT;
inputParameters.suggestedLatency = Pa_GetDeviceInfo( inputParameters.device )->defaultLowInputLatency;
inputParameters.hostApiSpecificStreamInfo = NULL;
audio.recDevChannels = inputParameters.channelCount;
}
else
pinputParameters = NULL;
err = Pa_OpenStream( &stream,
pinputParameters,
poutputParameters,
samplerate,
FRAMES_PER_BUFFER,
paNoFlag,
paCallback,
&audio );
if( err != paNoError )
goto error;
err = Pa_StartStream( stream );
if( err != paNoError )
goto error;
while( ( err = Pa_IsStreamActive( stream ) ) == 1 )
{
if( recCallbackName != NULL )
{
bool stop = false;
while( getRecDataLen( &audio ) >= FRAMES_PER_BUFFER ) // recording data is more than FRAMES_PER_BUFFER
{
mxArray * pdataArray = mxCreateNumericMatrix( FRAMES_PER_BUFFER, audio.recChannels, SAMPLE_CLASSID, mxREAL );
mxArray * presultArray = NULL;
SAMPLE * dataBuf = (SAMPLE *)mxGetData( pdataArray );
if( dataBuf != NULL )
{
for( int index = 0; index < FRAMES_PER_BUFFER; index++ ) // frame
{
for( int channel = 0; channel < audio.recChannels; channel++ ) // channel
{
*(dataBuf + FRAMES_PER_BUFFER * channel + index) = *(audio.recBuffer + audio.recBufLen * channel + audio.recBufReadPos);
}
if( nextReadPos( &audio ) == -1 )
break;
}
mexCallMATLAB( 1, &presultArray, 1, &pdataArray, recCallbackName );
if( !mxIsDouble( presultArray ) || mxGetPr( presultArray ) == NULL || ((int)*mxGetPr( presultArray )) != 0 ) // return 0 should be continue, others should be stop
stop = true;
}
if( presultArray != NULL )
mxDestroyArray( presultArray );
if( pdataArray != NULL )
mxDestroyArray( pdataArray );
if( stop ) break; // recording stop
}
if( stop ) break; // recording stop
Pa_Sleep( (FRAMES_PER_BUFFER * 1000) / samplerate );
}
else
Pa_Sleep( 50 );
}
if( err < 0 )
goto error;
err = Pa_StopStream( stream );
if( err != paNoError )
goto error;
err = Pa_CloseStream( stream );
if( err != paNoError )
goto error;
Pa_Terminate();
if( precRingArray != NULL )
mxDestroyArray( precRingArray );
return err;
error:
Pa_Terminate();
errorPrintf( ( "Error number: %d\n", err ) );
errorPrintf( ( "Error message: %s\n", Pa_GetErrorText(err) ) );
if( precRingArray != NULL )
mxDestroyArray( precRingArray );
return err;
}
int main(void)
{
PortAudioStream *stream;
PaError err;
paTestData data;
int i;
PaDeviceID inputDevice;
const PaDeviceInfo *pdi;
printf("PortAudio Test: input signal from each channel. %d buffers\n", NUM_BUFFERS );
data.liveChannel = 0;
err = Pa_Initialize();
if( err != paNoError ) goto error;
#ifdef INPUT_DEVICE_NAME
printf("Try to use device: %s\n", INPUT_DEVICE_NAME );
inputDevice = PaFindDeviceByName(INPUT_DEVICE_NAME);
if( inputDevice == paNoDevice )
{
printf("Could not find %s. Using default instead.\n", INPUT_DEVICE_NAME );
inputDevice = Pa_GetDefaultInputDeviceID();
}
#else
printf("Using default input device.\n");
inputDevice = Pa_GetDefaultInputDeviceID();
#endif
pdi = Pa_GetDeviceInfo( inputDevice );
if( pdi == NULL )
{
printf("Could not get device info!\n");
goto error;
}
data.numChannels = pdi->maxInputChannels;
printf("Input Device name is %s\n", pdi->name );
printf("Input Device has %d channels.\n", pdi->maxInputChannels);
err = Pa_OpenStream(
&stream,
inputDevice,
pdi->maxInputChannels,
paFloat32, /* 32 bit floating point input */
NULL,
OUTPUT_DEVICE,
2,
paFloat32, /* 32 bit floating point output */
NULL,
SAMPLE_RATE,
FRAMES_PER_BUFFER, /* frames per buffer */
NUM_BUFFERS, /* number of buffers, if zero then use default minimum */
paClipOff, /* we won't output out of range samples so don't bother clipping them */
patestCallback,
&data );
if( err != paNoError ) goto error;
data.liveChannel = 0;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
for( i=0; i<data.numChannels; i++ )
{
data.liveChannel = i;
printf("Channel %d being sent to output. Hit ENTER for next channel.", i );
fflush(stdout);
getchar();
}
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
err = Pa_CloseStream( stream );
Pa_Terminate();
printf("Test finished.\n");
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}
int openPA(Synth* synth, Vocoder* vc) {
printf("PortAudio Test: output sawtooth wave.\n"); fflush(stdout);
PaStreamParameters inputParameters, outputParameters;
paData* data = (paData*) malloc(sizeof(paData));
data->synth = synth;
data->vc = vc;
/* Initialize library before making any other calls. */
err = Pa_Initialize();
if( err != paNoError ) goto error;
/* Set up input parameters */
inputParameters.device = Pa_GetDefaultInputDevice(); /* default input device */
if (inputParameters.device == paNoDevice) {
fprintf(stderr,"Error: No default input device.\n");
goto error;
}
printf( "Input device # %d.\n", inputParameters.device );
printf( "Input LL: %g s\n", Pa_GetDeviceInfo( inputParameters.device )->defaultLowInputLatency );
printf( "Input HL: %g s\n", Pa_GetDeviceInfo( inputParameters.device )->defaultHighInputLatency );
inputParameters.channelCount = NUM_CHANNELS;
inputParameters.sampleFormat = FORMAT;
inputParameters.suggestedLatency =
Pa_GetDeviceInfo( inputParameters.device )->defaultLowInputLatency;
inputParameters.hostApiSpecificStreamInfo = NULL;
/* Set up output parameters */
outputParameters.device = Pa_GetDefaultOutputDevice(); /* default output device */
if (outputParameters.device == paNoDevice) {
fprintf(stderr,"Error: No default output device.\n");
goto error;
}
printf( "Output device # %d.\n", outputParameters.device );
printf( "Output LL: %g s\n", Pa_GetDeviceInfo( outputParameters.device )->defaultLowOutputLatency );
printf( "Output HL: %g s\n", Pa_GetDeviceInfo( outputParameters.device )->defaultHighOutputLatency );
outputParameters.channelCount = NUM_CHANNELS;
outputParameters.sampleFormat = FORMAT;
outputParameters.suggestedLatency =
Pa_GetDeviceInfo( outputParameters.device )->defaultLowOutputLatency;
outputParameters.hostApiSpecificStreamInfo = NULL;
/* Open an audio I/O stream. */
err = Pa_OpenStream(
&stream,
&inputParameters,
&outputParameters,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
paClipOff,
paCallback,
data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
synth_free(data->synth);
vc_free(data->vc);
free(data);
return err;
}
SoundDriver_PortAudio::SoundDriver_PortAudio() {
mixing_frequency=1;
driver_name="PortAudio v19";
active=false;
int devices=Pa_GetDeviceCount();
int current_input=0;
int current_output=0;
std::vector<String> output_names;
std::vector<String> input_names;
for (int i=0;i<devices;i++) {
const PaDeviceInfo * dinfo=Pa_GetDeviceInfo (i);
if (dinfo->maxOutputChannels) {
if (i==Pa_GetDefaultOutputDevice())
current_output=output_device_index.size();
output_device_index.push_back(i);
output_names.push_back(dinfo->name);
}
if (dinfo->maxInputChannels) {
if (i==Pa_GetDefaultInputDevice())
current_input=input_device_index.size();
input_device_index.push_back(i);
input_names.push_back(dinfo->name);
}
}
input_devices.set_all("input_devices","Input Devices",input_names,current_input);
output_devices.set_all("output_devices","Output Devices",output_names,current_output);
std::vector<String> buffer_sizes_text;
for (int i=0;i<MAX_BUFFER_SIZES;i++) {
buffer_sizes_text.push_back( String::num(buffer_sizes[i]) );
}
buffer_size.set_all("buffer_size","Buffer Size",buffer_sizes_text,6,"frames");
sampling_rate_values.push_back(4000);
sampling_rate_values.push_back(5512);
sampling_rate_values.push_back(8000);
sampling_rate_values.push_back(9600);
sampling_rate_values.push_back(11025);
sampling_rate_values.push_back(16000);
sampling_rate_values.push_back(22050);
sampling_rate_values.push_back(22050);
sampling_rate_values.push_back(32000);
sampling_rate_values.push_back(44100);
sampling_rate_values.push_back(48000);
sampling_rate_values.push_back(88200);
sampling_rate_values.push_back(96000);
sampling_rate_values.push_back(192000);
std::vector<String> sampling_rates_text;
for (int i=0;i<sampling_rate_values.size();i++) {
sampling_rates_text.push_back( String::num(sampling_rate_values[i]) );
}
int default_sampling_rate=0;
for (int i=0;i<sampling_rate_values.size();i++) {
default_sampling_rate=i;
if (sampling_rate_values[i]>=48000)
break;
}
mix_rate.set_all("sampling_rate","Sampling Rate",sampling_rates_text,default_sampling_rate,"hz");
settings.push_back(&input_devices);
settings.push_back(&output_devices);
settings.push_back(&buffer_size);
settings.push_back(&mix_rate);
stream=NULL;
}
/* Internal: create playback stream */
static pj_status_t create_play_stream(struct pa_aud_factory *pa,
const pjmedia_aud_param *param,
pjmedia_aud_play_cb play_cb,
void *user_data,
pjmedia_aud_stream **p_snd_strm)
{
pj_pool_t *pool;
pjmedia_aud_dev_index play_id;
struct pa_aud_stream *stream;
PaStreamParameters outputParam;
int sampleFormat;
const PaDeviceInfo *paDevInfo = NULL;
const PaHostApiInfo *paHostApiInfo = NULL;
const PaStreamInfo *paSI;
unsigned paFrames, paRate, paLatency;
PaError err;
PJ_ASSERT_RETURN(play_cb && p_snd_strm, PJ_EINVAL);
play_id = param->play_id;
if (play_id < 0) {
play_id = pa_get_default_output_dev(param->channel_count);
if (play_id < 0) {
/* No such device. */
return PJMEDIA_EAUD_NODEFDEV;
}
}
paDevInfo = Pa_GetDeviceInfo(play_id);
if (!paDevInfo) {
/* Assumed it is "No such device" error. */
return PJMEDIA_EAUD_INVDEV;
}
if (param->bits_per_sample == 8)
sampleFormat = paUInt8;
else if (param->bits_per_sample == 16)
sampleFormat = paInt16;
else if (param->bits_per_sample == 32)
sampleFormat = paInt32;
else
return PJMEDIA_EAUD_SAMPFORMAT;
pool = pj_pool_create(pa->pf, "playstrm", 1024, 1024, NULL);
if (!pool)
return PJ_ENOMEM;
stream = PJ_POOL_ZALLOC_T(pool, struct pa_aud_stream);
stream->pool = pool;
pj_strdup2_with_null(pool, &stream->name, paDevInfo->name);
stream->dir = PJMEDIA_DIR_PLAYBACK;
stream->play_id = play_id;
stream->rec_id = -1;
stream->user_data = user_data;
stream->samples_per_sec = param->clock_rate;
stream->samples_per_frame = param->samples_per_frame;
stream->bytes_per_sample = param->bits_per_sample / 8;
stream->channel_count = param->channel_count;
stream->play_cb = play_cb;
stream->play_buf = (pj_int16_t*)pj_pool_alloc(pool,
stream->samples_per_frame *
stream->bytes_per_sample);
stream->play_buf_count = 0;
pj_bzero(&outputParam, sizeof(outputParam));
outputParam.device = play_id;
outputParam.channelCount = param->channel_count;
outputParam.hostApiSpecificStreamInfo = NULL;
outputParam.sampleFormat = sampleFormat;
if (param->flags & PJMEDIA_AUD_DEV_CAP_OUTPUT_LATENCY)
outputParam.suggestedLatency=param->output_latency_ms / 1000.0;
else
outputParam.suggestedLatency=PJMEDIA_SND_DEFAULT_PLAY_LATENCY/1000.0;
paHostApiInfo = Pa_GetHostApiInfo(paDevInfo->hostApi);
/* Frames in PortAudio is number of samples in a single channel */
paFrames = param->samples_per_frame / param->channel_count;
err = Pa_OpenStream( &stream->play_strm, NULL, &outputParam,
param->clock_rate, paFrames,
paClipOff, &PaPlayerCallback, stream );
if (err != paNoError) {
pj_pool_release(pool);
return PJMEDIA_AUDIODEV_ERRNO_FROM_PORTAUDIO(err);
}
paSI = Pa_GetStreamInfo(stream->play_strm);
paRate = (unsigned)(paSI->sampleRate);
paLatency = (unsigned)(paSI->outputLatency * 1000);
PJ_LOG(5,(THIS_FILE, "Opened device %d: %s(%s) for playing, sample rate=%d"
", ch=%d, "
"bits=%d, %d samples per frame, latency=%d ms",
play_id, paDevInfo->name, paHostApiInfo->name,
paRate, param->channel_count,
param->bits_per_sample, param->samples_per_frame,
paLatency));
*p_snd_strm = &stream->base;
return PJ_SUCCESS;
}
int softrock_open(void) {
#ifdef DIRECTAUDIO
int arg;
int status;
#endif
#ifdef PORTAUDIO
int rc;
int status;
#endif
#ifdef PULSEAUDIO
int error;
pa_sample_spec params;
pa_buffer_attr attrs;
#endif
#ifdef PORTAUDIO
PaStreamParameters inputParameters;
PaStreamParameters outputParameters;
PaStreamInfo *info;
int devices;
int i;
PaDeviceInfo* deviceInfo;
if (softrock_get_verbose()) fprintf(stderr,"softrock_open: portaudio\n");
#endif
#ifdef DIRECTAUDIO
if (softrock_get_verbose()) fprintf(stderr,"softrock_open: %s\n",softrock_get_device());
#endif
if(softrock_get_playback()) {
return 0;
}
#ifdef PULSEAUDIO
if (softrock_get_verbose()) fprintf(stderr,"Using PulseAudio\n");
params.format=PA_SAMPLE_FLOAT32LE;
params.rate=softrock_get_sample_rate();
params.channels=2;
attrs.maxlength=attrs.minreq=attrs.prebuf=attrs.tlength=(uint32_t)-1;
attrs.fragsize=attrs.maxlength=attrs.minreq=attrs.prebuf=(uint32_t)-1;
attrs.fragsize=SAMPLES_PER_BUFFER*2 * sizeof(float);
attrs.tlength=SAMPLES_PER_BUFFER*2 * sizeof(float);
if (softrock_get_verbose()) fprintf(stderr,"params.rate=%d\n",params.rate);
stream=pa_simple_new("localhost","Softrock", PA_STREAM_RECORD, NULL, "IQ", ¶ms, NULL, &attrs, &error);
if(stream==NULL) {
if (softrock_get_verbose()) fprintf(stderr, __FILE__": pa_simple_new() failed: %s\n", pa_strerror(error));
exit(0);
}
playback_stream=pa_simple_new("localhost","Softrock", PA_STREAM_PLAYBACK, NULL, "IQ", ¶ms, NULL, &attrs, &error);
if(playback_stream==NULL) {
if (softrock_get_verbose()) fprintf(stderr, __FILE__": pa_simple_new() failed: %s\n", pa_strerror(error));
exit(0);
}
ftime(&start_time);
#endif
#ifdef PORTAUDIO
if (softrock_get_verbose()) fprintf(stderr,"Using PortAudio\n");
rc=Pa_Initialize();
if(rc!=paNoError) {
if (softrock_get_verbose()) fprintf(stderr,"Pa_Initialize failed: %s\n",Pa_GetErrorText(rc));
exit(1);
}
devices=Pa_GetDeviceCount();
if(devices<0) {
if (softrock_get_verbose()) fprintf(stderr,"Px_GetDeviceCount failed: %s\n",Pa_GetErrorText(devices));
} else {
if (softrock_get_verbose()) fprintf(stderr,"default input=%d output=%d devices=%d\n",Pa_GetDefaultInputDevice(),Pa_GetDefaultOutputDevice(),devices);
for(i=0;i<devices;i++) {
deviceInfo=Pa_GetDeviceInfo(i);
if (softrock_get_verbose()) fprintf(stderr,"%d - %s\n",i,deviceInfo->name);
if (softrock_get_verbose()) fprintf(stderr,"maxInputChannels: %d\n",deviceInfo->maxInputChannels);
if (softrock_get_verbose()) fprintf(stderr,"maxOututChannels: %d\n",deviceInfo->maxOutputChannels);
//if (softrock_get_verbose()) fprintf(stderr,"defaultLowInputLatency: %f\n",deviceInfo->defaultLowInputLatency);
//if (softrock_get_verbose()) fprintf(stderr,"defaultLowOutputLatency: %f\n",deviceInfo->defaultLowOutputLatency);
//if (softrock_get_verbose()) fprintf(stderr,"defaultHighInputLatency: %f\n",deviceInfo->defaultHighInputLatency);
//if (softrock_get_verbose()) fprintf(stderr,"defaultHighOutputLatency: %f\n",deviceInfo->defaultHighOutputLatency);
//if (softrock_get_verbose()) fprintf(stderr,"defaultSampleRate: %f\n",deviceInfo->defaultSampleRate);
}
}
inputParameters.device=atoi(softrock_get_input());
inputParameters.channelCount=2;
inputParameters.sampleFormat=paFloat32;
inputParameters.suggestedLatency=Pa_GetDeviceInfo(inputParameters.device)->defaultLowInputLatency;
inputParameters.hostApiSpecificStreamInfo=NULL;
outputParameters.device=atoi(softrock_get_output());
outputParameters.channelCount=2;
outputParameters.sampleFormat=paFloat32;
outputParameters.suggestedLatency=Pa_GetDeviceInfo(outputParameters.device)->defaultLowOutputLatency;
outputParameters.hostApiSpecificStreamInfo=NULL;
if (softrock_get_verbose()) fprintf(stderr,"input device=%d output device=%d\n",inputParameters.device,outputParameters.device);
rc=Pa_OpenStream(&stream,&inputParameters,&outputParameters,(double)softrock_get_sample_rate(),(unsigned long)SAMPLES_PER_BUFFER,paNoFlag,NULL,NULL);
if(rc!=paNoError) {
if (softrock_get_verbose()) fprintf(stderr,"Pa_OpenStream failed: %s\n",Pa_GetErrorText(rc));
exit(1);
}
rc=Pa_StartStream(stream);
if(rc!=paNoError) {
if (softrock_get_verbose()) fprintf(stderr,"Pa_StartStream failed: %s\n",Pa_GetErrorText(rc));
exit(1);
}
info=Pa_GetStreamInfo(stream);
if(info!=NULL) {
if (softrock_get_verbose()) fprintf(stderr,"stream.sampleRate=%f\n",info->sampleRate);
if (softrock_get_verbose()) fprintf(stderr,"stream.inputLatency=%f\n",info->inputLatency);
if (softrock_get_verbose()) fprintf(stderr,"stream.outputLatency=%f\n",info->outputLatency);
} else {
if (softrock_get_verbose()) fprintf(stderr,"Pa_GetStreamInfo returned NULL\n");
}
#endif
#ifdef DIRECTAUDIO
if (softrock_get_verbose()) fprintf(stderr,"Using direct audio\n");
/* open sound device */
fd = open(softrock_get_device(), O_RDWR);
if (fd < 0) {
perror("open of audio device failed");
exit(1);
}
/* set sampling parameters */
arg = SAMPLE_SIZE; /* sample size */
status = ioctl(fd, SOUND_PCM_WRITE_BITS, &arg);
if (status == -1)
perror("SOUND_PCM_WRITE_BITS ioctl failed");
if (arg != SAMPLE_SIZE)
perror("unable to set write sample size");
status = ioctl(fd, SOUND_PCM_READ_BITS, &arg);
if (status == -1)
perror("SOUND_PCM_READ_BITS ioctl failed");
if (arg != SAMPLE_SIZE)
perror("unable to set read sample size");
arg = CHANNELS; /* mono or stereo */
status = ioctl(fd, SOUND_PCM_WRITE_CHANNELS, &arg);
if (status == -1)
perror("SOUND_PCM_WRITE_CHANNELS ioctl failed");
if (arg != CHANNELS)
perror("unable to set number of channels");
arg = softrock_get_sample_rate(); /* sampling rate */
if (softrock_get_verbose()) fprintf(stderr,"sample_rate: %d\n",arg);
status = ioctl(fd, SOUND_PCM_WRITE_RATE, &arg);
if (status == -1)
perror("SOUND_PCM_WRITE_WRITE ioctl failed");
arg = AFMT_S16_LE; /* signed little endian */
status = ioctl(fd, SOUND_PCM_SETFMT, &arg);
if (status == -1)
perror("SOUND_PCM_SETFMTS ioctl failed");
#endif
InitBuf(&rx_r, "RX_R");
InitBuf(&rx_l, "RX_R");
printf("my ring buffers are set\n");
return 0;
}
/* Internal: Create both player and recorder stream */
static pj_status_t create_bidir_stream(struct pa_aud_factory *pa,
const pjmedia_aud_param *param,
pjmedia_aud_rec_cb rec_cb,
pjmedia_aud_play_cb play_cb,
void *user_data,
pjmedia_aud_stream **p_snd_strm)
{
pj_pool_t *pool;
pjmedia_aud_dev_index rec_id, play_id;
struct pa_aud_stream *stream;
PaStream *paStream = NULL;
PaStreamParameters inputParam;
PaStreamParameters outputParam;
int sampleFormat;
const PaDeviceInfo *paRecDevInfo = NULL;
const PaDeviceInfo *paPlayDevInfo = NULL;
const PaHostApiInfo *paRecHostApiInfo = NULL;
const PaHostApiInfo *paPlayHostApiInfo = NULL;
const PaStreamInfo *paSI;
unsigned paFrames, paRate, paInputLatency, paOutputLatency;
PaError err;
PJ_ASSERT_RETURN(play_cb && rec_cb && p_snd_strm, PJ_EINVAL);
rec_id = param->rec_id;
if (rec_id < 0) {
rec_id = pa_get_default_input_dev(param->channel_count);
if (rec_id < 0) {
/* No such device. */
return PJMEDIA_EAUD_NODEFDEV;
}
}
paRecDevInfo = Pa_GetDeviceInfo(rec_id);
if (!paRecDevInfo) {
/* Assumed it is "No such device" error. */
return PJMEDIA_EAUD_INVDEV;
}
play_id = param->play_id;
if (play_id < 0) {
play_id = pa_get_default_output_dev(param->channel_count);
if (play_id < 0) {
/* No such device. */
return PJMEDIA_EAUD_NODEFDEV;
}
}
paPlayDevInfo = Pa_GetDeviceInfo(play_id);
if (!paPlayDevInfo) {
/* Assumed it is "No such device" error. */
return PJMEDIA_EAUD_INVDEV;
}
if (param->bits_per_sample == 8)
sampleFormat = paUInt8;
else if (param->bits_per_sample == 16)
sampleFormat = paInt16;
else if (param->bits_per_sample == 32)
sampleFormat = paInt32;
else
return PJMEDIA_EAUD_SAMPFORMAT;
pool = pj_pool_create(pa->pf, "sndstream", 1024, 1024, NULL);
if (!pool)
return PJ_ENOMEM;
stream = PJ_POOL_ZALLOC_T(pool, struct pa_aud_stream);
stream->pool = pool;
pj_strdup2_with_null(pool, &stream->name, paRecDevInfo->name);
stream->dir = PJMEDIA_DIR_CAPTURE_PLAYBACK;
stream->play_id = play_id;
stream->rec_id = rec_id;
stream->user_data = user_data;
stream->samples_per_sec = param->clock_rate;
stream->samples_per_frame = param->samples_per_frame;
stream->bytes_per_sample = param->bits_per_sample / 8;
stream->channel_count = param->channel_count;
stream->rec_cb = rec_cb;
stream->play_cb = play_cb;
stream->rec_buf = (pj_int16_t*)pj_pool_alloc(pool,
stream->samples_per_frame * stream->bytes_per_sample);
stream->rec_buf_count = 0;
stream->play_buf = (pj_int16_t*)pj_pool_alloc(pool,
stream->samples_per_frame * stream->bytes_per_sample);
stream->play_buf_count = 0;
pj_bzero(&inputParam, sizeof(inputParam));
inputParam.device = rec_id;
inputParam.channelCount = param->channel_count;
inputParam.hostApiSpecificStreamInfo = NULL;
inputParam.sampleFormat = sampleFormat;
if (param->flags & PJMEDIA_AUD_DEV_CAP_INPUT_LATENCY)
inputParam.suggestedLatency = param->input_latency_ms / 1000.0;
else
inputParam.suggestedLatency = PJMEDIA_SND_DEFAULT_REC_LATENCY / 1000.0;
paRecHostApiInfo = Pa_GetHostApiInfo(paRecDevInfo->hostApi);
pj_bzero(&outputParam, sizeof(outputParam));
outputParam.device = play_id;
outputParam.channelCount = param->channel_count;
outputParam.hostApiSpecificStreamInfo = NULL;
outputParam.sampleFormat = sampleFormat;
if (param->flags & PJMEDIA_AUD_DEV_CAP_OUTPUT_LATENCY)
outputParam.suggestedLatency=param->output_latency_ms / 1000.0;
else
outputParam.suggestedLatency=PJMEDIA_SND_DEFAULT_PLAY_LATENCY/1000.0;
paPlayHostApiInfo = Pa_GetHostApiInfo(paPlayDevInfo->hostApi);
/* Frames in PortAudio is number of samples in a single channel */
paFrames = param->samples_per_frame / param->channel_count;
/* If both input and output are on the same device, open a single stream
* for both input and output.
*/
if (rec_id == play_id) {
err = Pa_OpenStream( &paStream, &inputParam, &outputParam,
param->clock_rate, paFrames,
paClipOff, &PaRecorderPlayerCallback, stream );
if (err == paNoError) {
/* Set play stream and record stream to the same stream */
stream->play_strm = stream->rec_strm = paStream;
}
} else {
err = -1;
}
/* .. otherwise if input and output are on the same device, OR if we're
* unable to open a bidirectional stream, then open two separate
* input and output stream.
*/
if (paStream == NULL) {
/* Open input stream */
err = Pa_OpenStream( &stream->rec_strm, &inputParam, NULL,
param->clock_rate, paFrames,
paClipOff, &PaRecorderCallback, stream );
if (err == paNoError) {
/* Open output stream */
err = Pa_OpenStream( &stream->play_strm, NULL, &outputParam,
param->clock_rate, paFrames,
paClipOff, &PaPlayerCallback, stream );
if (err != paNoError)
Pa_CloseStream(stream->rec_strm);
}
}
if (err != paNoError) {
pj_pool_release(pool);
return PJMEDIA_AUDIODEV_ERRNO_FROM_PORTAUDIO(err);
}
paSI = Pa_GetStreamInfo(stream->rec_strm);
paRate = (unsigned)(paSI->sampleRate);
paInputLatency = (unsigned)(paSI->inputLatency * 1000);
paSI = Pa_GetStreamInfo(stream->play_strm);
paOutputLatency = (unsigned)(paSI->outputLatency * 1000);
PJ_LOG(5,(THIS_FILE, "Opened device %s(%s)/%s(%s) for recording and "
"playback, sample rate=%d, ch=%d, "
"bits=%d, %d samples per frame, input latency=%d ms, "
"output latency=%d ms",
paRecDevInfo->name, paRecHostApiInfo->name,
paPlayDevInfo->name, paPlayHostApiInfo->name,
paRate, param->channel_count,
param->bits_per_sample, param->samples_per_frame,
paInputLatency, paOutputLatency));
*p_snd_strm = &stream->base;
return PJ_SUCCESS;
}
_JATTA_EXPORT Jatta::PortAudio::Device Jatta::PortAudio::HostApi::GetDefaultOutputDevice()
{
return Device(host->defaultOutputDevice, Pa_GetDeviceInfo(host->defaultOutputDevice));
}
int main(void)
{
PaStreamParameters outputParameters;
PaStream *stream;
PaError err;
paTestData data;
#ifdef __APPLE__
PaMacCoreStreamInfo macInfo;
const SInt32 channelMap[4] = { -1, -1, 0, 1 };
#endif
int i;
printf("PortAudio Test: output sine wave. SR = %d, BufSize = %d\n", SAMPLE_RATE, FRAMES_PER_BUFFER);
printf("Output will be mapped to channels 2 and 3 instead of 0 and 1.\n");
/* initialise sinusoidal wavetable */
for( i=0; i<TABLE_SIZE; i++ )
{
data.sine[i] = (float) sin( ((double)i/(double)TABLE_SIZE) * M_PI * 2. );
}
data.left_phase = data.right_phase = 0;
err = Pa_Initialize();
if( err != paNoError ) goto error;
/** setup host specific info */
#ifdef __APPLE__
PaMacCore_SetupStreamInfo( &macInfo, paMacCorePlayNice );
PaMacCore_SetupChannelMap( &macInfo, channelMap, 4 );
for( i=0; i<4; ++i )
printf( "channel %d name: %s\n", i, PaMacCore_GetChannelName( Pa_GetDefaultOutputDevice(), i, false ) );
#else
printf( "Channel mapping not supported on this platform. Reverting to normal sine test.\n" );
#endif
outputParameters.device = Pa_GetDefaultOutputDevice(); /* default output device */
if (outputParameters.device == paNoDevice) {
fprintf(stderr,"Error: No default output device.\n");
goto error;
}
outputParameters.channelCount = 2; /* stereo output */
outputParameters.sampleFormat = paFloat32; /* 32 bit floating point output */
outputParameters.suggestedLatency = Pa_GetDeviceInfo( outputParameters.device )->defaultLowOutputLatency;
#ifdef __APPLE__
outputParameters.hostApiSpecificStreamInfo = &macInfo;
#else
outputParameters.hostApiSpecificStreamInfo = NULL;
#endif
err = Pa_OpenStream(
&stream,
NULL, /* no input */
&outputParameters,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
paClipOff, /* we won't output out of range samples so don't bother clipping them */
patestCallback,
&data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
printf("Play for %d seconds.\n", NUM_SECONDS );
Pa_Sleep( NUM_SECONDS * 1000 );
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
printf("Test finished.\n");
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}
int main(void)
{
PaStreamParameters outputParameters;
PaStream *stream;
PaError err;
int safeSineCount, stressedSineCount;
int safeUnderflowCount, stressedUnderflowCount;
paTestData data = {0};
double load;
printf("PortAudio Test: output sine waves, count underflows. SR = %d, BufSize = %d. MAX_LOAD = %f\n",
SAMPLE_RATE, FRAMES_PER_BUFFER, (float)MAX_LOAD );
err = Pa_Initialize();
if( err != paNoError ) goto error;
outputParameters.device = Pa_GetDefaultOutputDevice(); /* default output device */
outputParameters.channelCount = 1; /* mono output */
outputParameters.sampleFormat = paFloat32; /* 32 bit floating point output */
outputParameters.suggestedLatency = Pa_GetDeviceInfo( outputParameters.device )->defaultLowOutputLatency;
outputParameters.hostApiSpecificStreamInfo = NULL;
err = Pa_OpenStream(
&stream,
NULL, /* no input */
&outputParameters,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
paClipOff, /* we won't output out of range samples so don't bother clipping them */
patestCallback,
&data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
printf("Establishing load conditions...\n" );
/* Determine number of sines required to get to 50% */
do
{
data.sineCount++;
Pa_Sleep( 100 );
load = Pa_GetStreamCpuLoad( stream );
printf("sineCount = %d, CPU load = %f\n", data.sineCount, load );
}
while( load < 0.5 && data.sineCount < (MAX_SINES-1));
safeSineCount = data.sineCount;
/* Calculate target stress value then ramp up to that level*/
stressedSineCount = (int) (2.0 * data.sineCount * MAX_LOAD );
if( stressedSineCount > MAX_SINES )
stressedSineCount = MAX_SINES;
for( ; data.sineCount < stressedSineCount; data.sineCount++ )
{
Pa_Sleep( 100 );
load = Pa_GetStreamCpuLoad( stream );
printf("STRESSING: sineCount = %d, CPU load = %f\n", data.sineCount, load );
}
printf("Counting underflows for 5 seconds.\n");
data.countUnderflows = 1;
Pa_Sleep( 5000 );
stressedUnderflowCount = data.outputUnderflowCount;
data.countUnderflows = 0;
data.sineCount = safeSineCount;
printf("Resuming safe load...\n");
Pa_Sleep( 1500 );
data.outputUnderflowCount = 0;
Pa_Sleep( 1500 );
load = Pa_GetStreamCpuLoad( stream );
printf("sineCount = %d, CPU load = %f\n", data.sineCount, load );
printf("Counting underflows for 5 seconds.\n");
data.countUnderflows = 1;
Pa_Sleep( 5000 );
safeUnderflowCount = data.outputUnderflowCount;
printf("Stop stream.\n");
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
if( stressedUnderflowCount == 0 )
printf("Test failed, no output underflows detected under stress.\n");
else if( safeUnderflowCount != 0 )
printf("Test failed, %d unexpected underflows detected under safe load.\n", safeUnderflowCount);
else
printf("Test passed, %d expected output underflows detected under stress, 0 unexpected underflows detected under safe load.\n", stressedUnderflowCount );
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}
int main(void)
{
PaStreamParameters outputParameters;
PaStream *stream;
PaError err;
float buffer[FRAMES_PER_BUFFER][2]; /* stereo output buffer */
float sine[TABLE_SIZE]; /* sine wavetable */
int left_phase = 0;
int right_phase = 0;
int left_inc = 1;
int right_inc = 3; /* higher pitch so we can distinguish left and right. */
int i, j, k;
int bufferCount;
printf("PortAudio Test: output sine wave. SR = %d, BufSize = %d\n", SAMPLE_RATE, FRAMES_PER_BUFFER);
/* initialise sinusoidal wavetable */
for( i=0; i<TABLE_SIZE; i++ )
{
sine[i] = (float) sin( ((double)i/(double)TABLE_SIZE) * M_PI * 2. );
}
err = Pa_Initialize();
if( err != paNoError ) goto error;
outputParameters.device = Pa_GetDefaultOutputDevice(); /* default output device */
outputParameters.channelCount = 2; /* stereo output */
outputParameters.sampleFormat = paFloat32; /* 32 bit floating point output */
outputParameters.suggestedLatency = Pa_GetDeviceInfo( outputParameters.device )->defaultLowOutputLatency;
outputParameters.hostApiSpecificStreamInfo = NULL;
err = Pa_OpenStream(
&stream,
NULL, /* no input */
&outputParameters,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
paClipOff, /* we won't output out of range samples so don't bother clipping them */
NULL, /* no callback, use blocking API */
NULL ); /* no callback, so no callback userData */
if( err != paNoError ) goto error;
printf( "Play 3 times, higher each time.\n" );
for( k=0; k < 3; ++k )
{
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
printf("Play for %d seconds.\n", NUM_SECONDS );
bufferCount = ((NUM_SECONDS * SAMPLE_RATE) / FRAMES_PER_BUFFER);
for( i=0; i < bufferCount; i++ )
{
for( j=0; j < FRAMES_PER_BUFFER; j++ )
{
buffer[j][0] = sine[left_phase]; /* left */
buffer[j][1] = sine[right_phase]; /* right */
left_phase += left_inc;
if( left_phase >= TABLE_SIZE ) left_phase -= TABLE_SIZE;
right_phase += right_inc;
if( right_phase >= TABLE_SIZE ) right_phase -= TABLE_SIZE;
}
err = Pa_WriteStream( stream, buffer, FRAMES_PER_BUFFER );
if( err != paNoError ) goto error;
}
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
++left_inc;
++right_inc;
Pa_Sleep( 1000 );
}
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
printf("Test finished.\n");
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}
int main(void)
{
PaStreamParameters outputParameters;
PaStream *stream;
PaError err;
paTestData data;
int i;
printf("PortAudio Test: output sine wave. SR = %d, BufSize = %d\n", SAMPLE_RATE, FRAMES_PER_BUFFER);
/* initialise sinusoidal wavetable */
for( i=0; i<TABLE_SIZE; i++ )
{
data.sine[i] = (float) sin( ((double)i/(double)TABLE_SIZE) * M_PI * 2. );
}
data.left_phase = data.right_phase = 0;
err = Pa_Initialize();
if( err != paNoError ) goto error;
outputParameters.device = Pa_GetDefaultOutputDevice(); /* default output device */
outputParameters.channelCount = 2; /* stereo output */
outputParameters.sampleFormat = paFloat32; /* 32 bit floating point output */
outputParameters.suggestedLatency = Pa_GetDeviceInfo( outputParameters.device )->defaultLowOutputLatency;
outputParameters.hostApiSpecificStreamInfo = NULL;
err = Pa_OpenStream(
&stream,
NULL, /* no input */
&outputParameters,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
paClipOff, /* we won't output out of range samples so don't bother clipping them */
patestCallback,
&data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
printf("Play for %d seconds.\n", NUM_SECONDS );
Pa_Sleep( NUM_SECONDS * 1000 );
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
printf("Test finished.\n");
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}
int sdr1000_open(void) {
int arg;
int status;
int rc;
#ifdef PORTAUDIO
PaStreamParameters inputParameters;
PaStreamParameters outputParameters;
const PaStreamInfo *info;
int devices;
int i;
const PaDeviceInfo* deviceInfo;
fprintf(stderr,"sdr1000_open: portaudio\n");
#else
fprintf(stderr,"sdr1000_open: %s\n",sdr1000_get_device());
#endif
#ifdef PORTAUDIO
rc=Pa_Initialize();
if(rc!=paNoError) {
fprintf(stderr,"Pa_Initialize failed: %s\n",Pa_GetErrorText(rc));
exit(1);
}
devices=Pa_GetDeviceCount();
if(devices<0) {
fprintf(stderr,"Px_GetDeviceCount failed: %s\n",Pa_GetErrorText(devices));
} else {
fprintf(stderr,"default input=%d output=%d devices=%d\n",Pa_GetDefaultInputDevice(),Pa_GetDefaultOutputDevice(),devices);
for(i=0;i<devices;i++) {
deviceInfo=Pa_GetDeviceInfo(i);
fprintf(stderr,"%d - %s\n",i,deviceInfo->name);
fprintf(stderr,"maxInputChannels: %d\n",deviceInfo->maxInputChannels);
fprintf(stderr,"maxOututChannels: %d\n",deviceInfo->maxOutputChannels);
//fprintf(stderr,"defaultLowInputLatency: %f\n",deviceInfo->defaultLowInputLatency);
//fprintf(stderr,"defaultLowOutputLatency: %f\n",deviceInfo->defaultLowOutputLatency);
//fprintf(stderr,"defaultHighInputLatency: %f\n",deviceInfo->defaultHighInputLatency);
//fprintf(stderr,"defaultHighOutputLatency: %f\n",deviceInfo->defaultHighOutputLatency);
//fprintf(stderr,"defaultSampleRate: %f\n",deviceInfo->defaultSampleRate);
}
}
inputParameters.device=atoi(sdr1000_get_input());
inputParameters.channelCount=2;
inputParameters.sampleFormat=paFloat32;
inputParameters.suggestedLatency=Pa_GetDeviceInfo(inputParameters.device)->defaultLowInputLatency;
inputParameters.hostApiSpecificStreamInfo=NULL;
outputParameters.device=atoi(sdr1000_get_output());
outputParameters.channelCount=2;
outputParameters.sampleFormat=paFloat32;
outputParameters.suggestedLatency=Pa_GetDeviceInfo(outputParameters.device)->defaultLowOutputLatency;
outputParameters.hostApiSpecificStreamInfo=NULL;
fprintf(stderr,"input device=%d output device=%d\n",inputParameters.device,outputParameters.device);
rc=Pa_OpenStream(&stream,&inputParameters,&outputParameters,(double)sdr1000_get_sample_rate(),(unsigned long)SAMPLES_PER_BUFFER,paNoFlag,NULL,NULL);
if(rc!=paNoError) {
fprintf(stderr,"Pa_OpenStream failed: %s\n",Pa_GetErrorText(rc));
exit(1);
}
rc=Pa_StartStream(stream);
if(rc!=paNoError) {
fprintf(stderr,"Pa_StartStream failed: %s\n",Pa_GetErrorText(rc));
exit(1);
}
info=Pa_GetStreamInfo(stream);
if(info!=NULL) {
fprintf(stderr,"stream.sampleRate=%f\n",info->sampleRate);
fprintf(stderr,"stream.inputLatency=%f\n",info->inputLatency);
fprintf(stderr,"stream.outputLatency=%f\n",info->outputLatency);
} else {
fprintf(stderr,"Pa_GetStreamInfo returned NULL\n");
}
#else
/* open sound device */
fd = open(sdr1000_get_device(), O_RDWR);
if (fd < 0) {
perror("open of audio device failed");
exit(1);
}
/* set sampling parameters */
arg = SAMPLE_SIZE; /* sample size */
status = ioctl(fd, SOUND_PCM_WRITE_BITS, &arg);
if (status == -1)
perror("SOUND_PCM_WRITE_BITS ioctl failed");
if (arg != SAMPLE_SIZE)
perror("unable to set write sample size");
status = ioctl(fd, SOUND_PCM_READ_BITS, &arg);
if (status == -1)
perror("SOUND_PCM_READ_BITS ioctl failed");
if (arg != SAMPLE_SIZE)
perror("unable to set read sample size");
arg = CHANNELS; /* mono or stereo */
status = ioctl(fd, SOUND_PCM_WRITE_CHANNELS, &arg);
if (status == -1)
perror("SOUND_PCM_WRITE_CHANNELS ioctl failed");
if (arg != CHANNELS)
perror("unable to set number of channels");
arg = sdr1000_get_sample_rate(); /* sampling rate */
fprintf(stderr,"sample_rate: %d\n",arg);
status = ioctl(fd, SOUND_PCM_WRITE_RATE, &arg);
if (status == -1)
perror("SOUND_PCM_WRITE_WRITE ioctl failed");
arg = AFMT_S16_LE; /* signed little endian */
status = ioctl(fd, SOUND_PCM_SETFMT, &arg);
if (status == -1)
perror("SOUND_PCM_SETFMTS ioctl failed");
#endif
return 0;
}
static int PAOpenDevice( aout_instance_t *p_aout )
{
aout_sys_t *p_sys = p_aout->output.p_sys;
const PaDeviceInfo *p_pdi;
PaError i_err;
vlc_value_t val, text;
int i;
/* Initialize portaudio */
i_err = Pa_Initialize();
if( i_err != paNoError )
{
msg_Err( p_aout, "Pa_Initialize returned %d : %s",
i_err, Pa_GetErrorText( i_err ) );
return VLC_EGENERIC;
}
p_sys->i_devices = Pa_GetDeviceCount();
if( p_sys->i_devices < 0 )
{
i_err = p_sys->i_devices;
msg_Err( p_aout, "Pa_GetDeviceCount returned %d : %s", i_err,
Pa_GetErrorText( i_err ) );
goto error;
}
/* Display all devices info */
msg_Dbg( p_aout, "number of devices = %d", p_sys->i_devices );
for( i = 0; i < p_sys->i_devices; i++ )
{
p_pdi = Pa_GetDeviceInfo( i );
msg_Dbg( p_aout, "------------------------------------- #%d", i );
msg_Dbg( p_aout, "Name = %s", p_pdi->name );
msg_Dbg( p_aout, "Max Inputs = %d, Max Outputs = %d",
p_pdi->maxInputChannels, p_pdi->maxOutputChannels );
}
msg_Dbg( p_aout, "-------------------------------------" );
msg_Dbg( p_aout, "requested device is #%d", p_sys->i_device_id );
if( p_sys->i_device_id >= p_sys->i_devices )
{
msg_Err( p_aout, "device %d does not exist", p_sys->i_device_id );
goto error;
}
p_sys->deviceInfo = Pa_GetDeviceInfo( p_sys->i_device_id );
if( p_sys->deviceInfo->maxOutputChannels < 1 )
{
msg_Err( p_aout, "no channel available" );
goto error;
}
if( var_Type( p_aout, "audio-device" ) == 0 )
{
var_Create( p_aout, "audio-device", VLC_VAR_INTEGER|VLC_VAR_HASCHOICE);
text.psz_string = _("Audio Device");
var_Change( p_aout, "audio-device", VLC_VAR_SETTEXT, &text, NULL );
if( p_sys->deviceInfo->maxOutputChannels >= 1 )
{
val.i_int = AOUT_VAR_MONO;
text.psz_string = _("Mono");
var_Change( p_aout, "audio-device", VLC_VAR_ADDCHOICE,
&val, &text );
msg_Dbg( p_aout, "device supports 1 channel" );
}
if( p_sys->deviceInfo->maxOutputChannels >= 2 )
{
val.i_int = AOUT_VAR_STEREO;
text.psz_string = _("Stereo");
var_Change( p_aout, "audio-device", VLC_VAR_ADDCHOICE,
&val, &text );
var_Change( p_aout, "audio-device", VLC_VAR_SETDEFAULT,
&val, NULL );
var_Set( p_aout, "audio-device", val );
msg_Dbg( p_aout, "device supports 2 channels" );
}
if( p_sys->deviceInfo->maxOutputChannels >= 4 )
{
val.i_int = AOUT_VAR_2F2R;
text.psz_string = _("2 Front 2 Rear");
var_Change( p_aout, "audio-device", VLC_VAR_ADDCHOICE,
&val, &text );
msg_Dbg( p_aout, "device supports 4 channels" );
}
if( p_sys->deviceInfo->maxOutputChannels >= 5 )
{
val.i_int = AOUT_VAR_3F2R;
text.psz_string = _("3 Front 2 Rear");
var_Change( p_aout, "audio-device",
VLC_VAR_ADDCHOICE, &val, &text );
msg_Dbg( p_aout, "device supports 5 channels" );
}
if( p_sys->deviceInfo->maxOutputChannels >= 6 )
{
val.i_int = AOUT_VAR_5_1;
text.psz_string = "5.1";
var_Change( p_aout, "audio-device", VLC_VAR_ADDCHOICE,
&val, &text );
msg_Dbg( p_aout, "device supports 5.1 channels" );
}
var_AddCallback( p_aout, "audio-device", aout_ChannelsRestart, NULL );
var_SetBool( p_aout, "intf-change", true );
}
/* Audio format is paFloat32 (always supported by portaudio v19) */
p_aout->output.output.i_format = VLC_CODEC_FL32;
return VLC_SUCCESS;
error:
if( ( i_err = Pa_Terminate() ) != paNoError )
{
msg_Err( p_aout, "Pa_Terminate returned %d", i_err );
}
return VLC_EGENERIC;
}
int main(void)
{
PaStreamParameters outputParameters;
PaStream *stream;
PaError err;
TestData data;
int i, j;
printf( "PortAudio Test: output sine wave. SR = %d, BufSize = %d\n",
SAMPLE_RATE, FRAMES_PER_BUFFER );
/* initialise sinusoidal wavetable */
for( i=0; i<TABLE_SIZE; i++ )
{
data.sine[i] = (float) sin( ((double)i/(double)TABLE_SIZE) * M_PI * 2. );
}
err = Pa_Initialize();
if( err != paNoError ) goto error;
outputParameters.device = Pa_GetDefaultOutputDevice();
outputParameters.channelCount = 2; /* stereo output */
outputParameters.sampleFormat = paFloat32; /* 32 bit floating point output */
outputParameters.suggestedLatency = Pa_GetDeviceInfo( outputParameters.device )->defaultLowOutputLatency;
outputParameters.hostApiSpecificStreamInfo = NULL;
err = Pa_OpenStream(
&stream,
NULL, /* no input */
&outputParameters,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
paClipOff, /* output will be in-range, so no need to clip */
TestCallback,
&data );
if( err != paNoError ) goto error;
printf("Repeating test %d times.\n", NUM_LOOPS );
for( i=0; i < NUM_LOOPS; ++i )
{
data.phase = 0;
data.generatedFramesCount = 0;
data.callbackReturnedPaComplete = 0;
data.callbackInvokedAfterReturningPaComplete = 0;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
printf("Play for %d seconds.\n", NUM_SECONDS );
/* wait for the callback to complete generating NUM_SECONDS of tone */
do
{
Pa_Sleep( 500 );
}
while( !data.callbackReturnedPaComplete );
printf( "Callback returned paComplete.\n" );
printf( "Waiting for buffers to finish playing...\n" );
/* wait for stream to become inactive,
or for a timeout of approximately NUM_SECONDS
*/
j = 0;
while( (err = Pa_IsStreamActive( stream )) == 1 && j < NUM_SECONDS * 2 )
{
printf(".\n" );
Pa_Sleep( 500 );
++j;
}
if( err < 0 )
{
goto error;
}
else if( err == 1 )
{
printf( "TEST FAILED: Timed out waiting for buffers to finish playing.\n" );
}
else
{
printf("Buffers finished.\n" );
}
if( data.callbackInvokedAfterReturningPaComplete )
{
printf( "TEST FAILED: Callback was invoked after returning paComplete.\n" );
}
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
}
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
printf("Test finished.\n");
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}
JNIEXPORT jobject JNICALL Java_com_github_rjeschke_jpa_JPA_getDeviceInfo(JNIEnv *env, jclass clazz, jint index)
{
const PaDeviceInfo *inf = Pa_GetDeviceInfo((PaDeviceIndex)index);
return inf ? toPaDeviceInfo(env, inf) : 0;
}
int main(void)
{
int i, numDevices, defaultDisplayed;
const PaDeviceInfo *deviceInfo;
PaStreamParameters inputParameters, outputParameters;
PaError err;
Pa_Initialize();
printf( "PortAudio version number = %d\nPortAudio version text = '%s'\n",
Pa_GetVersion(), Pa_GetVersionText() );
numDevices = Pa_GetDeviceCount();
if( numDevices < 0 )
{
printf( "ERROR: Pa_CountDevices returned 0x%x\n", numDevices );
err = numDevices;
goto error;
}
printf( "Number of devices = %d\n", numDevices );
for( i=0; i<numDevices; i++ )
{
deviceInfo = Pa_GetDeviceInfo( i );
printf( "--------------------------------------- device #%d\n", i );
/* Mark global and API specific default devices */
defaultDisplayed = 0;
if( i == Pa_GetDefaultInputDevice() )
{
printf( "[ Default Input" );
defaultDisplayed = 1;
}
else if( i == Pa_GetHostApiInfo( deviceInfo->hostApi )->defaultInputDevice )
{
const PaHostApiInfo *hostInfo = Pa_GetHostApiInfo( deviceInfo->hostApi );
printf( "[ Default %s Input", hostInfo->name );
defaultDisplayed = 1;
}
if( i == Pa_GetDefaultOutputDevice() )
{
printf( (defaultDisplayed ? "," : "[") );
printf( " Default Output" );
defaultDisplayed = 1;
}
else if( i == Pa_GetHostApiInfo( deviceInfo->hostApi )->defaultOutputDevice )
{
const PaHostApiInfo *hostInfo = Pa_GetHostApiInfo( deviceInfo->hostApi );
printf( (defaultDisplayed ? "," : "[") );
printf( " Default %s Output", hostInfo->name );
defaultDisplayed = 1;
}
if( defaultDisplayed )
printf( " ]\n" );
/* print device info fields */
printf( "Name = %s\n", deviceInfo->name );
printf( "Host API = %s\n", Pa_GetHostApiInfo( deviceInfo->hostApi )->name );
printf( "Max inputs = %d", deviceInfo->maxInputChannels );
printf( ", Max outputs = %d\n", deviceInfo->maxOutputChannels );
printf( "Default low input latency = %8.3f\n", deviceInfo->defaultLowInputLatency );
printf( "Default low output latency = %8.3f\n", deviceInfo->defaultLowOutputLatency );
printf( "Default high input latency = %8.3f\n", deviceInfo->defaultHighInputLatency );
printf( "Default high output latency = %8.3f\n", deviceInfo->defaultHighOutputLatency );
#ifdef WIN32
#ifndef PA_NO_ASIO
/* ASIO specific latency information */
if( Pa_GetHostApiInfo( deviceInfo->hostApi )->type == paASIO ){
long minLatency, maxLatency, preferredLatency, granularity;
err = PaAsio_GetAvailableLatencyValues( i,
&minLatency, &maxLatency, &preferredLatency, &granularity );
printf( "ASIO minimum buffer size = %ld\n", minLatency );
printf( "ASIO maximum buffer size = %ld\n", maxLatency );
printf( "ASIO preferred buffer size = %ld\n", preferredLatency );
if( granularity == -1 )
printf( "ASIO buffer granularity = power of 2\n" );
else
printf( "ASIO buffer granularity = %ld\n", granularity );
}
#endif /* !PA_NO_ASIO */
#endif /* WIN32 */
printf( "Default sample rate = %8.2f\n", deviceInfo->defaultSampleRate );
/* poll for standard sample rates */
inputParameters.device = i;
inputParameters.channelCount = deviceInfo->maxInputChannels;
inputParameters.sampleFormat = paInt16;
inputParameters.suggestedLatency = 0; /* ignored by Pa_IsFormatSupported() */
inputParameters.hostApiSpecificStreamInfo = NULL;
outputParameters.device = i;
outputParameters.channelCount = deviceInfo->maxOutputChannels;
outputParameters.sampleFormat = paInt16;
outputParameters.suggestedLatency = 0; /* ignored by Pa_IsFormatSupported() */
outputParameters.hostApiSpecificStreamInfo = NULL;
if( inputParameters.channelCount > 0 )
{
printf("Supported standard sample rates\n for half-duplex 16 bit %d channel input = \n",
inputParameters.channelCount );
PrintSupportedStandardSampleRates( &inputParameters, NULL );
}
if( outputParameters.channelCount > 0 )
{
printf("Supported standard sample rates\n for half-duplex 16 bit %d channel output = \n",
outputParameters.channelCount );
PrintSupportedStandardSampleRates( NULL, &outputParameters );
}
if( inputParameters.channelCount > 0 && outputParameters.channelCount > 0 )
{
printf("Supported standard sample rates\n for full-duplex 16 bit %d channel input, %d channel output = \n",
inputParameters.channelCount, outputParameters.channelCount );
PrintSupportedStandardSampleRates( &inputParameters, &outputParameters );
}
}
Pa_Terminate();
printf("----------------------------------------------\n");
return 0;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}
/*-------------------------------------------------------------------------------------------------*/
static int TestBadOpens( void )
{
PaStream* stream = NULL;
PaError result;
PaQaData myData;
PaStreamParameters ipp, opp;
/* Setup data for synthesis thread. */
myData.framesLeft = (unsigned long) (SAMPLE_RATE * 100); /* 100 seconds */
myData.numChannels = 1;
myData.mode = MODE_OUTPUT;
/*----------------------------- No devices specified: */
ipp.device = opp.device = paNoDevice;
ipp.channelCount = opp.channelCount = 0; /* Also no channels. */
ipp.hostApiSpecificStreamInfo = opp.hostApiSpecificStreamInfo = NULL;
ipp.sampleFormat = opp.sampleFormat = paFloat32;
/* Take the low latency of the default device for all subsequent tests. */
ipp.suggestedLatency = Pa_GetDeviceInfo(Pa_GetDefaultInputDevice())->defaultLowInputLatency;
opp.suggestedLatency = Pa_GetDeviceInfo(Pa_GetDefaultOutputDevice())->defaultLowOutputLatency;
HOPEFOR(((result = Pa_OpenStream(&stream, &ipp, &opp,
SAMPLE_RATE, FRAMES_PER_BUFFER,
paClipOff, QaCallback, &myData )) == paInvalidDevice));
/*----------------------------- No devices specified #2: */
HOPEFOR(((result = Pa_OpenStream(&stream, NULL, NULL,
SAMPLE_RATE, FRAMES_PER_BUFFER,
paClipOff, QaCallback, &myData )) == paInvalidDevice));
/*----------------------------- Out of range input device specified: */
ipp.hostApiSpecificStreamInfo = opp.hostApiSpecificStreamInfo = NULL;
ipp.sampleFormat = opp.sampleFormat = paFloat32;
ipp.channelCount = 0; ipp.device = Pa_GetDeviceCount(); /* And no output device, and no channels. */
opp.channelCount = 0; opp.device = paNoDevice;
HOPEFOR(((result = Pa_OpenStream(&stream, &ipp, NULL,
SAMPLE_RATE, FRAMES_PER_BUFFER,
paClipOff, QaCallback, &myData )) == paInvalidDevice));
/*----------------------------- Out of range output device specified: */
ipp.hostApiSpecificStreamInfo = opp.hostApiSpecificStreamInfo = NULL;
ipp.sampleFormat = opp.sampleFormat = paFloat32;
ipp.channelCount = 0; ipp.device = paNoDevice; /* And no input device, and no channels. */
opp.channelCount = 0; opp.device = Pa_GetDeviceCount();
HOPEFOR(((result = Pa_OpenStream(&stream, NULL, &opp,
SAMPLE_RATE, FRAMES_PER_BUFFER,
paClipOff, QaCallback, &myData )) == paInvalidDevice));
/*----------------------------- Zero input channels: */
ipp.hostApiSpecificStreamInfo = opp.hostApiSpecificStreamInfo = NULL;
ipp.sampleFormat = opp.sampleFormat = paFloat32;
ipp.channelCount = 0; ipp.device = Pa_GetDefaultInputDevice();
opp.channelCount = 0; opp.device = paNoDevice; /* And no output device, and no output channels. */
HOPEFOR(((result = Pa_OpenStream(&stream, &ipp, NULL,
SAMPLE_RATE, FRAMES_PER_BUFFER,
paClipOff, QaCallback, &myData )) == paInvalidChannelCount));
/*----------------------------- Zero output channels: */
ipp.hostApiSpecificStreamInfo = opp.hostApiSpecificStreamInfo = NULL;
ipp.sampleFormat = opp.sampleFormat = paFloat32;
ipp.channelCount = 0; ipp.device = paNoDevice; /* And no input device, and no input channels. */
opp.channelCount = 0; opp.device = Pa_GetDefaultOutputDevice();
HOPEFOR(((result = Pa_OpenStream(&stream, NULL, &opp,
SAMPLE_RATE, FRAMES_PER_BUFFER,
paClipOff, QaCallback, &myData )) == paInvalidChannelCount));
/*----------------------------- Nonzero input and output channels but no output device: */
ipp.hostApiSpecificStreamInfo = opp.hostApiSpecificStreamInfo = NULL;
ipp.sampleFormat = opp.sampleFormat = paFloat32;
ipp.channelCount = 2; ipp.device = Pa_GetDefaultInputDevice(); /* Both stereo. */
opp.channelCount = 2; opp.device = paNoDevice;
HOPEFOR(((result = Pa_OpenStream(&stream, &ipp, &opp,
SAMPLE_RATE, FRAMES_PER_BUFFER,
paClipOff, QaCallback, &myData )) == paInvalidDevice));
/*----------------------------- Nonzero input and output channels but no input device: */
ipp.hostApiSpecificStreamInfo = opp.hostApiSpecificStreamInfo = NULL;
ipp.sampleFormat = opp.sampleFormat = paFloat32;
ipp.channelCount = 2; ipp.device = paNoDevice;
opp.channelCount = 2; opp.device = Pa_GetDefaultOutputDevice();
HOPEFOR(((result = Pa_OpenStream(&stream, &ipp, &opp,
SAMPLE_RATE, FRAMES_PER_BUFFER,
paClipOff, QaCallback, &myData )) == paInvalidDevice));
/*----------------------------- NULL stream pointer: */
ipp.hostApiSpecificStreamInfo = opp.hostApiSpecificStreamInfo = NULL;
ipp.sampleFormat = opp.sampleFormat = paFloat32;
ipp.channelCount = 0; ipp.device = paNoDevice; /* Output is more likely than input. */
opp.channelCount = 2; opp.device = Pa_GetDefaultOutputDevice(); /* Only 2 output channels. */
HOPEFOR(((result = Pa_OpenStream(NULL, &ipp, &opp,
SAMPLE_RATE, FRAMES_PER_BUFFER,
paClipOff, QaCallback, &myData )) == paBadStreamPtr));
/*----------------------------- Low sample rate: */
ipp.hostApiSpecificStreamInfo = opp.hostApiSpecificStreamInfo = NULL;
ipp.sampleFormat = opp.sampleFormat = paFloat32;
ipp.channelCount = 0; ipp.device = paNoDevice;
opp.channelCount = 2; opp.device = Pa_GetDefaultOutputDevice();
HOPEFOR(((result = Pa_OpenStream(&stream, NULL, &opp,
1.0, FRAMES_PER_BUFFER, /* 1 cycle per second (1 Hz) is too low. */
paClipOff, QaCallback, &myData )) == paInvalidSampleRate));
/*----------------------------- High sample rate: */
ipp.hostApiSpecificStreamInfo = opp.hostApiSpecificStreamInfo = NULL;
ipp.sampleFormat = opp.sampleFormat = paFloat32;
ipp.channelCount = 0; ipp.device = paNoDevice;
opp.channelCount = 2; opp.device = Pa_GetDefaultOutputDevice();
HOPEFOR(((result = Pa_OpenStream(&stream, NULL, &opp,
10000000.0, FRAMES_PER_BUFFER, /* 10^6 cycles per second (10 MHz) is too high. */
paClipOff, QaCallback, &myData )) == paInvalidSampleRate));
/*----------------------------- NULL callback: */
/* NULL callback is valid in V19 -- it means use blocking read/write stream
ipp.hostApiSpecificStreamInfo = opp.hostApiSpecificStreamInfo = NULL;
ipp.sampleFormat = opp.sampleFormat = paFloat32;
ipp.channelCount = 0; ipp.device = paNoDevice;
opp.channelCount = 2; opp.device = Pa_GetDefaultOutputDevice();
HOPEFOR(((result = Pa_OpenStream(&stream, NULL, &opp,
SAMPLE_RATE, FRAMES_PER_BUFFER,
paClipOff,
NULL,
&myData )) == paNullCallback));
*/
/*----------------------------- Bad flag: */
ipp.hostApiSpecificStreamInfo = opp.hostApiSpecificStreamInfo = NULL;
ipp.sampleFormat = opp.sampleFormat = paFloat32;
ipp.channelCount = 0; ipp.device = paNoDevice;
opp.channelCount = 2; opp.device = Pa_GetDefaultOutputDevice();
HOPEFOR(((result = Pa_OpenStream(&stream, NULL, &opp,
SAMPLE_RATE, FRAMES_PER_BUFFER,
255, /* Is 8 maybe legal V19 API? */
QaCallback, &myData )) == paInvalidFlag));
/*----------------------------- using input device as output device: */
if( FindInputOnlyDevice() != paNoDevice )
{
ipp.hostApiSpecificStreamInfo = opp.hostApiSpecificStreamInfo = NULL;
ipp.sampleFormat = opp.sampleFormat = paFloat32;
ipp.channelCount = 0; ipp.device = paNoDevice; /* And no input device, and no channels. */
opp.channelCount = 2; opp.device = FindInputOnlyDevice();
HOPEFOR(((result = Pa_OpenStream(&stream, NULL, &opp,
SAMPLE_RATE, FRAMES_PER_BUFFER,
paClipOff, QaCallback, &myData )) == paInvalidChannelCount));
}
/*----------------------------- using output device as input device: */
if( FindOutputOnlyDevice() != paNoDevice )
{
ipp.hostApiSpecificStreamInfo = opp.hostApiSpecificStreamInfo = NULL;
ipp.sampleFormat = opp.sampleFormat = paFloat32;
ipp.channelCount = 2; ipp.device = FindOutputOnlyDevice();
opp.channelCount = 0; opp.device = paNoDevice; /* And no output device, and no channels. */
HOPEFOR(((result = Pa_OpenStream(&stream, &ipp, NULL,
SAMPLE_RATE, FRAMES_PER_BUFFER,
paClipOff, QaCallback, &myData )) == paInvalidChannelCount));
}
if( stream != NULL ) Pa_CloseStream( stream );
return result;
}
s32 Init()
{
started=false;
stream=NULL;
ReadSettings();
PaError err = Pa_Initialize();
if( err != paNoError )
{
fprintf(stderr,"* SPU2-X: PortAudio error: %s\n", Pa_GetErrorText( err ) );
return -1;
}
started=true;
int deviceIndex = -1;
fprintf(stderr,"* SPU2-X: Enumerating PortAudio devices:");
for(int i=0;i<Pa_GetDeviceCount();i++)
{
const PaDeviceInfo * info = Pa_GetDeviceInfo(i);
const PaHostApiInfo * apiinfo = Pa_GetHostApiInfo(info->hostApi);
fprintf(stderr," *** Device %d: '%s' (%s)", i, info->name, apiinfo->name);
if(apiinfo->type == m_ApiId)
{
static wchar_t buffer [1000];
mbstowcs(buffer,info->name,1000);
buffer[999]=0;
if(m_Device == buffer)
{
deviceIndex = i;
fprintf(stderr," (selected)");
}
}
fprintf(stderr,"\n");
}
if(deviceIndex<0 && m_ApiId>=0)
{
for(int i=0;i<Pa_GetHostApiCount();i++)
{
const PaHostApiInfo * apiinfo = Pa_GetHostApiInfo(i);
if(apiinfo->type == m_ApiId)
{
deviceIndex = apiinfo->defaultOutputDevice;
}
}
}
if(deviceIndex>=0)
{
void* infoPtr = NULL;
#ifdef __WIN32__
PaWasapiStreamInfo info = {
sizeof(PaWasapiStreamInfo),
paWASAPI,
1,
paWinWasapiExclusive
};
if((m_ApiId == paWASAPI) && m_WasapiExclusiveMode)
{
// Pass it the Exclusive mode enable flag
infoPtr = &info;
}
#endif
PaStreamParameters outParams = {
// PaDeviceIndex device;
// int channelCount;
// PaSampleFormat sampleFormat;
// PaTime suggestedLatency;
// void *hostApiSpecificStreamInfo;
deviceIndex,
2,
paInt32,
0.2f,
infoPtr
};
err = Pa_OpenStream(&stream,
NULL, &outParams, SampleRate,
SndOutPacketSize,
paNoFlag,
#ifndef __LINUX__
PaCallback,
#else
PaLinuxCallback,
#endif
NULL);
}
else
{
err = Pa_OpenDefaultStream( &stream,
0, 2, paInt32, 48000,
SndOutPacketSize,
#ifndef __LINUX__
PaCallback,
#else
PaLinuxCallback,
#endif
NULL );
}
if( err != paNoError )
{
fprintf(stderr,"* SPU2-X: PortAudio error: %s\n", Pa_GetErrorText( err ) );
Pa_Terminate();
return -1;
}
err = Pa_StartStream( stream );
if( err != paNoError )
{
fprintf(stderr,"* SPU2-X: PortAudio error: %s\n", Pa_GetErrorText( err ) );
Pa_CloseStream(stream);
stream=NULL;
Pa_Terminate();
return -1;
}
return 0;
}
void* RecieveClientThread(void* data) // recieve udp packets containing message/voice to the other client
{
struct thread* new_data = data;
printf("you are recieving from %s IP address\n", new_data->IPaddr);
PaStreamParameters outputParam;
PaStream *stream = NULL;
char *sampleBlock;
int i, sockfd, numBytes;
PaError error;
struct sockaddr_in servaddr, cliaddr;
sockfd = socket(AF_INET, SOCK_DGRAM, 0); // make udp socket
bzero(&servaddr, sizeof(servaddr));
servaddr.sin_family = AF_INET;
servaddr.sin_addr.s_addr = inet_addr(new_data->IPaddr);
servaddr.sin_port = htons(new_data->Port);
bind(sockfd, (struct sockaddr*)&servaddr, sizeof(servaddr));
fflush(stdout);
numBytes = FRAMES_BUFFER * SAMPLE_SIZE * 2;
sampleBlock = (char *) malloc(numBytes);
if(sampleBlock == NULL){
printf("Could not allocate record array.\n");
exit(1);
}
CLEAR(sampleBlock);
printf("Initializing the devices...\n");
error = Pa_Initialize();
if(error != paNoError)
goto errorState;
outputParam.device = Pa_GetDefaultOutputDevice();
printf( "Output device # %d.\n", outputParam.device );
outputParam.channelCount = 2;
outputParam.sampleFormat = paFloat32;
outputParam.suggestedLatency = Pa_GetDeviceInfo( outputParam.device )->defaultHighOutputLatency;
outputParam.hostApiSpecificStreamInfo = NULL;
error = Pa_OpenStream(&stream, NULL, &outputParam, SAMPLE_RATE, FRAMES_BUFFER, paClipOff, NULL, NULL );
if( error != paNoError )
goto errorState;
error = Pa_StartStream( stream );
if( error != paNoError )
goto errorState;
printf("The client is talking to you\n");
fflush(stdout);
while(1){
recvfrom(sockfd, sampleBlock, 4096, 0, NULL, NULL); // recieve packet containing voice data from the other client
error = Pa_WriteStream(stream, sampleBlock, FRAMES_BUFFER);
if(error && UNDERFLOW)
goto exitState;
}
error = Pa_StopStream(stream);
if(error != paNoError)
goto errorState;
CLEAR(sampleBlock);
free(sampleBlock);
Pa_Terminate();
return 0;
exitState:
if(stream){
Pa_AbortStream(stream);
Pa_CloseStream(stream);
}
free(sampleBlock);
Pa_Terminate();
if(error & paOutputUnderflow)
fprintf(stderr, "Output Underflow.\n");
return (void*)-2;
errorState:
if(stream) {
Pa_AbortStream(stream);
Pa_CloseStream(stream);
}
free(sampleBlock);
Pa_Terminate();
fprintf(stderr, "An error occured while using the portaudio stream\n");
fprintf(stderr, "Error number: %d\n", error);
fprintf(stderr, "Error message: %s\n", Pa_GetErrorText(error));
return (void*)-1;
}
