/*
* Update tuple origtup (size origsz), located in offset oldoff of buffer
* oldbuf, to newtup (size newsz) as summary tuple for the page range starting
* at heapBlk. oldbuf must not be locked on entry, and is not locked at exit.
*
* If samepage is true, attempt to put the new tuple in the same page, but if
* there's no room, use some other one.
*
* If the update is successful, return true; the revmap is updated to point to
* the new tuple. If the update is not done for whatever reason, return false.
* Caller may retry the update if this happens.
*/
bool
brin_doupdate(Relation idxrel, BlockNumber pagesPerRange,
BrinRevmap *revmap, BlockNumber heapBlk,
Buffer oldbuf, OffsetNumber oldoff,
const BrinTuple *origtup, Size origsz,
const BrinTuple *newtup, Size newsz,
bool samepage)
{
Page oldpage;
ItemId oldlp;
BrinTuple *oldtup;
Size oldsz;
Buffer newbuf;
bool extended;
Assert(newsz == MAXALIGN(newsz));
/* If the item is oversized, don't bother. */
if (newsz > BrinMaxItemSize)
{
ereport(ERROR,
(errcode(ERRCODE_PROGRAM_LIMIT_EXCEEDED),
errmsg("index row size %lu exceeds maximum %lu for index \"%s\"",
(unsigned long) newsz,
(unsigned long) BrinMaxItemSize,
RelationGetRelationName(idxrel))));
return false; /* keep compiler quiet */
}
/* make sure the revmap is long enough to contain the entry we need */
brinRevmapExtend(revmap, heapBlk);
if (!samepage)
{
/* need a page on which to put the item */
newbuf = brin_getinsertbuffer(idxrel, oldbuf, newsz, &extended);
if (!BufferIsValid(newbuf))
{
Assert(!extended);
return false;
}
/*
* Note: it's possible (though unlikely) that the returned newbuf is
* the same as oldbuf, if brin_getinsertbuffer determined that the old
* buffer does in fact have enough space.
*/
if (newbuf == oldbuf)
{
Assert(!extended);
newbuf = InvalidBuffer;
}
}
else
{
LockBuffer(oldbuf, BUFFER_LOCK_EXCLUSIVE);
newbuf = InvalidBuffer;
extended = false;
}
oldpage = BufferGetPage(oldbuf);
oldlp = PageGetItemId(oldpage, oldoff);
/*
* Check that the old tuple wasn't updated concurrently: it might have
* moved someplace else entirely ...
*/
if (!ItemIdIsNormal(oldlp))
{
LockBuffer(oldbuf, BUFFER_LOCK_UNLOCK);
/*
* If this happens, and the new buffer was obtained by extending the
* relation, then we need to ensure we don't leave it uninitialized or
* forget about it.
*/
if (BufferIsValid(newbuf))
{
if (extended)
brin_initialize_empty_new_buffer(idxrel, newbuf);
UnlockReleaseBuffer(newbuf);
if (extended)
FreeSpaceMapVacuum(idxrel);
}
return false;
}
oldsz = ItemIdGetLength(oldlp);
oldtup = (BrinTuple *) PageGetItem(oldpage, oldlp);
/*
* ... or it might have been updated in place to different contents.
*/
if (!brin_tuples_equal(oldtup, oldsz, origtup, origsz))
{
LockBuffer(oldbuf, BUFFER_LOCK_UNLOCK);
if (BufferIsValid(newbuf))
{
if (extended)
brin_initialize_empty_new_buffer(idxrel, newbuf);
UnlockReleaseBuffer(newbuf);
if (extended)
FreeSpaceMapVacuum(idxrel);
}
return false;
}
/*
* Great, the old tuple is intact. We can proceed with the update.
*
* If there's enough room in the old page for the new tuple, replace it.
*
* Note that there might now be enough space on the page even though the
* caller told us there isn't, if a concurrent update moved another tuple
* elsewhere or replaced a tuple with a smaller one.
*/
if (((BrinPageFlags(oldpage) & BRIN_EVACUATE_PAGE) == 0) &&
brin_can_do_samepage_update(oldbuf, origsz, newsz))
{
if (BufferIsValid(newbuf))
{
/* as above */
if (extended)
brin_initialize_empty_new_buffer(idxrel, newbuf);
UnlockReleaseBuffer(newbuf);
}
START_CRIT_SECTION();
PageIndexDeleteNoCompact(oldpage, &oldoff, 1);
if (PageAddItemExtended(oldpage, (Item) newtup, newsz, oldoff,
PAI_OVERWRITE | PAI_ALLOW_FAR_OFFSET) == InvalidOffsetNumber)
elog(ERROR, "failed to add BRIN tuple");
MarkBufferDirty(oldbuf);
/* XLOG stuff */
if (RelationNeedsWAL(idxrel))
{
xl_brin_samepage_update xlrec;
XLogRecPtr recptr;
uint8 info = XLOG_BRIN_SAMEPAGE_UPDATE;
xlrec.offnum = oldoff;
XLogBeginInsert();
XLogRegisterData((char *) &xlrec, SizeOfBrinSamepageUpdate);
XLogRegisterBuffer(0, oldbuf, REGBUF_STANDARD);
XLogRegisterBufData(0, (char *) newtup, newsz);
recptr = XLogInsert(RM_BRIN_ID, info);
PageSetLSN(oldpage, recptr);
}
END_CRIT_SECTION();
LockBuffer(oldbuf, BUFFER_LOCK_UNLOCK);
if (extended)
FreeSpaceMapVacuum(idxrel);
return true;
}
else if (newbuf == InvalidBuffer)
{
/*
* Not enough space, but caller said that there was. Tell them to
* start over.
*/
LockBuffer(oldbuf, BUFFER_LOCK_UNLOCK);
return false;
}
else
{
/*
* Not enough free space on the oldpage. Put the new tuple on the new
* page, and update the revmap.
*/
Page newpage = BufferGetPage(newbuf);
Buffer revmapbuf;
ItemPointerData newtid;
OffsetNumber newoff;
BlockNumber newblk = InvalidBlockNumber;
Size freespace = 0;
revmapbuf = brinLockRevmapPageForUpdate(revmap, heapBlk);
START_CRIT_SECTION();
/*
* We need to initialize the page if it's newly obtained. Note we
* will WAL-log the initialization as part of the update, so we don't
* need to do that here.
*/
if (extended)
brin_page_init(BufferGetPage(newbuf), BRIN_PAGETYPE_REGULAR);
PageIndexDeleteNoCompact(oldpage, &oldoff, 1);
newoff = PageAddItem(newpage, (Item) newtup, newsz,
InvalidOffsetNumber, false, false);
if (newoff == InvalidOffsetNumber)
elog(ERROR, "failed to add BRIN tuple to new page");
MarkBufferDirty(oldbuf);
MarkBufferDirty(newbuf);
/* needed to update FSM below */
if (extended)
{
newblk = BufferGetBlockNumber(newbuf);
freespace = br_page_get_freespace(newpage);
}
ItemPointerSet(&newtid, BufferGetBlockNumber(newbuf), newoff);
brinSetHeapBlockItemptr(revmapbuf, pagesPerRange, heapBlk, newtid);
MarkBufferDirty(revmapbuf);
/* XLOG stuff */
if (RelationNeedsWAL(idxrel))
{
xl_brin_update xlrec;
XLogRecPtr recptr;
uint8 info;
info = XLOG_BRIN_UPDATE | (extended ? XLOG_BRIN_INIT_PAGE : 0);
xlrec.insert.offnum = newoff;
xlrec.insert.heapBlk = heapBlk;
xlrec.insert.pagesPerRange = pagesPerRange;
xlrec.oldOffnum = oldoff;
XLogBeginInsert();
/* new page */
XLogRegisterData((char *) &xlrec, SizeOfBrinUpdate);
XLogRegisterBuffer(0, newbuf, REGBUF_STANDARD | (extended ? REGBUF_WILL_INIT : 0));
XLogRegisterBufData(0, (char *) newtup, newsz);
/* revmap page */
XLogRegisterBuffer(1, revmapbuf, REGBUF_STANDARD);
/* old page */
XLogRegisterBuffer(2, oldbuf, REGBUF_STANDARD);
recptr = XLogInsert(RM_BRIN_ID, info);
PageSetLSN(oldpage, recptr);
PageSetLSN(newpage, recptr);
PageSetLSN(BufferGetPage(revmapbuf), recptr);
}
END_CRIT_SECTION();
LockBuffer(revmapbuf, BUFFER_LOCK_UNLOCK);
LockBuffer(oldbuf, BUFFER_LOCK_UNLOCK);
UnlockReleaseBuffer(newbuf);
if (extended)
{
Assert(BlockNumberIsValid(newblk));
RecordPageWithFreeSpace(idxrel, newblk, freespace);
FreeSpaceMapVacuum(idxrel);
}
return true;
}
}
/*
* Update tuple origtup (size origsz), located in offset oldoff of buffer
* oldbuf, to newtup (size newsz) as summary tuple for the page range starting
* at heapBlk. oldbuf must not be locked on entry, and is not locked at exit.
*
* If samepage is true, attempt to put the new tuple in the same page, but if
* there's no room, use some other one.
*
* If the update is successful, return true; the revmap is updated to point to
* the new tuple. If the update is not done for whatever reason, return false.
* Caller may retry the update if this happens.
*/
bool
brin_doupdate(Relation idxrel, BlockNumber pagesPerRange,
BrinRevmap *revmap, BlockNumber heapBlk,
Buffer oldbuf, OffsetNumber oldoff,
const BrinTuple *origtup, Size origsz,
const BrinTuple *newtup, Size newsz,
bool samepage)
{
Page oldpage;
ItemId oldlp;
BrinTuple *oldtup;
Size oldsz;
Buffer newbuf;
BrinSpecialSpace *special;
bool extended = false;
newsz = MAXALIGN(newsz);
/* make sure the revmap is long enough to contain the entry we need */
brinRevmapExtend(revmap, heapBlk);
if (!samepage)
{
/* need a page on which to put the item */
newbuf = brin_getinsertbuffer(idxrel, oldbuf, newsz, &extended);
/* XXX delay vacuuming FSM until locks are released? */
if (extended)
FreeSpaceMapVacuum(idxrel);
if (!BufferIsValid(newbuf))
return false;
/*
* Note: it's possible (though unlikely) that the returned newbuf is
* the same as oldbuf, if brin_getinsertbuffer determined that the old
* buffer does in fact have enough space.
*/
if (newbuf == oldbuf)
newbuf = InvalidBuffer;
}
else
{
LockBuffer(oldbuf, BUFFER_LOCK_EXCLUSIVE);
newbuf = InvalidBuffer;
}
oldpage = BufferGetPage(oldbuf);
oldlp = PageGetItemId(oldpage, oldoff);
/*
* Check that the old tuple wasn't updated concurrently: it might have
* moved someplace else entirely ...
*/
if (!ItemIdIsNormal(oldlp))
{
LockBuffer(oldbuf, BUFFER_LOCK_UNLOCK);
if (BufferIsValid(newbuf))
UnlockReleaseBuffer(newbuf);
return false;
}
oldsz = ItemIdGetLength(oldlp);
oldtup = (BrinTuple *) PageGetItem(oldpage, oldlp);
/*
* ... or it might have been updated in place to different contents.
*/
if (!brin_tuples_equal(oldtup, oldsz, origtup, origsz))
{
LockBuffer(oldbuf, BUFFER_LOCK_UNLOCK);
if (BufferIsValid(newbuf))
UnlockReleaseBuffer(newbuf);
return false;
}
special = (BrinSpecialSpace *) PageGetSpecialPointer(oldpage);
/*
* Great, the old tuple is intact. We can proceed with the update.
*
* If there's enough room in the old page for the new tuple, replace it.
*
* Note that there might now be enough space on the page even though the
* caller told us there isn't, if a concurrent update moved another tuple
* elsewhere or replaced a tuple with a smaller one.
*/
if (((special->flags & BRIN_EVACUATE_PAGE) == 0) &&
brin_can_do_samepage_update(oldbuf, origsz, newsz))
{
if (BufferIsValid(newbuf))
UnlockReleaseBuffer(newbuf);
START_CRIT_SECTION();
PageIndexDeleteNoCompact(oldpage, &oldoff, 1);
if (PageAddItem(oldpage, (Item) newtup, newsz, oldoff, true,
false) == InvalidOffsetNumber)
elog(ERROR, "failed to add BRIN tuple");
MarkBufferDirty(oldbuf);
/* XLOG stuff */
if (RelationNeedsWAL(idxrel))
{
xl_brin_samepage_update xlrec;
XLogRecPtr recptr;
uint8 info = XLOG_BRIN_SAMEPAGE_UPDATE;
xlrec.offnum = oldoff;
XLogBeginInsert();
XLogRegisterData((char *) &xlrec, SizeOfBrinSamepageUpdate);
XLogRegisterBuffer(0, oldbuf, REGBUF_STANDARD);
XLogRegisterBufData(0, (char *) newtup, newsz);
recptr = XLogInsert(RM_BRIN_ID, info);
PageSetLSN(oldpage, recptr);
}
END_CRIT_SECTION();
LockBuffer(oldbuf, BUFFER_LOCK_UNLOCK);
return true;
}
else if (newbuf == InvalidBuffer)
{
/*
* Not enough space, but caller said that there was. Tell them to
* start over.
*/
LockBuffer(oldbuf, BUFFER_LOCK_UNLOCK);
return false;
}
else
{
/*
* Not enough free space on the oldpage. Put the new tuple on the new
* page, and update the revmap.
*/
Page newpage = BufferGetPage(newbuf);
Buffer revmapbuf;
ItemPointerData newtid;
OffsetNumber newoff;
revmapbuf = brinLockRevmapPageForUpdate(revmap, heapBlk);
START_CRIT_SECTION();
PageIndexDeleteNoCompact(oldpage, &oldoff, 1);
newoff = PageAddItem(newpage, (Item) newtup, newsz,
InvalidOffsetNumber, false, false);
if (newoff == InvalidOffsetNumber)
elog(ERROR, "failed to add BRIN tuple to new page");
MarkBufferDirty(oldbuf);
MarkBufferDirty(newbuf);
ItemPointerSet(&newtid, BufferGetBlockNumber(newbuf), newoff);
brinSetHeapBlockItemptr(revmapbuf, pagesPerRange, heapBlk, newtid);
MarkBufferDirty(revmapbuf);
/* XLOG stuff */
if (RelationNeedsWAL(idxrel))
{
xl_brin_update xlrec;
XLogRecPtr recptr;
uint8 info;
info = XLOG_BRIN_UPDATE | (extended ? XLOG_BRIN_INIT_PAGE : 0);
xlrec.insert.offnum = newoff;
xlrec.insert.heapBlk = heapBlk;
xlrec.insert.pagesPerRange = pagesPerRange;
xlrec.oldOffnum = oldoff;
XLogBeginInsert();
/* new page */
XLogRegisterData((char *) &xlrec, SizeOfBrinUpdate);
XLogRegisterBuffer(0, newbuf, REGBUF_STANDARD | (extended ? REGBUF_WILL_INIT : 0));
XLogRegisterBufData(0, (char *) newtup, newsz);
/* revmap page */
XLogRegisterBuffer(1, revmapbuf, REGBUF_STANDARD);
/* old page */
XLogRegisterBuffer(2, oldbuf, REGBUF_STANDARD);
recptr = XLogInsert(RM_BRIN_ID, info);
PageSetLSN(oldpage, recptr);
PageSetLSN(newpage, recptr);
PageSetLSN(BufferGetPage(revmapbuf), recptr);
}
END_CRIT_SECTION();
LockBuffer(revmapbuf, BUFFER_LOCK_UNLOCK);
LockBuffer(oldbuf, BUFFER_LOCK_UNLOCK);
UnlockReleaseBuffer(newbuf);
return true;
}
}
