C++ (Cpp) RTMP_OS_NETDEV_START_QUEUE Beispiele

Beispiel #1

Datei: ap_mbss.c Projekt: qwerty1023/wive-rtnl-firmware

/*
========================================================================
Routine Description:
    Open a virtual network interface.

Arguments:
	pDev			which WLAN network interface

Return Value:
    0: open successfully
    otherwise: open fail

Note:
========================================================================
*/
INT MBSS_VirtualIF_Open(
	IN	PNET_DEV	pDev)
{
	PRTMP_ADAPTER pAd;
	INT BssId;

	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> MBSSVirtualIF_open\n", RTMP_OS_NETDEV_GET_DEVNAME(pDev)));

	pAd = RTMP_OS_NETDEV_GET_PRIV(pDev);
	BssId = RT28xx_MBSS_IdxGet(pAd, pDev);
    if (BssId < 0)
        return -1;
    
    pAd->ApCfg.MBSSID[BssId].bBcnSntReq = TRUE;

	if (VIRTUAL_IF_UP(pAd) != 0)
		return -1;

	/* increase MODULE use count */
	RT_MOD_INC_USE_COUNT();

	RTMP_OS_NETDEV_START_QUEUE(pDev);

	return 0;
} /* End of MBSS_VirtualIF_Open */

Beispiel #2

Datei: p2p_inf.c Projekt: vision8520/kernel-amlogic-mx

/*
========================================================================
Routine Description:
    Open a virtual network interface.

Arguments:
    dev_p           which WLAN network interface

Return Value:
    0: open successfully
    otherwise: open fail

Note:
========================================================================
*/
int P2P_VirtualIF_Open(
    IN PNET_DEV		dev_p)
{
    VOID *pAd;
    /*PMULTISSID_STRUCT	pMbss; */

    pAd = RTMP_OS_NETDEV_GET_PRIV(dev_p);
    ASSERT(pAd);

    DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

    if (RTMP_COM_IoctlHandle(pAd, NULL, CMD_RTPRIV_IOCTL_P2P_OPEN_PRE, 0,
                             dev_p, 0) != NDIS_STATUS_SUCCESS)
        return -1;

    if (VIRTUAL_IF_UP(pAd) != 0)
        return -1;

    /* increase MODULE use count */
    RT_MOD_INC_USE_COUNT();

    RTMP_OS_NETDEV_START_QUEUE(dev_p);

    if (RTMP_COM_IoctlHandle(pAd, NULL, CMD_RTPRIV_IOCTL_P2P_OPEN_POST, 0,
                             dev_p, 0) != NDIS_STATUS_SUCCESS)
        return -1;

    DBGPRINT(RT_DEBUG_TRACE, ("%s: <=== %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

    return 0;
}

Beispiel #3

Datei: ap_apcli_inf.c Projekt: qwerty1023/wive-rtnl-firmware

/*
========================================================================
Routine Description:
    Open a virtual network interface.

Arguments:
    dev_p           which WLAN network interface

Return Value:
    0: open successfully
    otherwise: open fail

Note:
========================================================================
*/
INT ApCli_VirtualIF_Open(
	IN PNET_DEV		dev_p)
{
	UCHAR ifIndex;
	PRTMP_ADAPTER pAd;

	pAd = RTMP_OS_NETDEV_GET_PRIV(dev_p);
	ASSERT(pAd);

	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

	if (VIRTUAL_IF_UP(pAd) != 0)
		return -1;

	// increase MODULE use count
	RT_MOD_INC_USE_COUNT();

	for (ifIndex = 0; ifIndex < MAX_APCLI_NUM; ifIndex++)
	{
		if (pAd->ApCfg.ApCliTab[ifIndex].dev == dev_p)
		{
			RTMP_OS_NETDEV_START_QUEUE(dev_p);
			ApCliIfUp(pAd);
		}
	}

	return 0;
} /* End of ApCli_VirtualIF_Open */

Beispiel #4

Datei: cfg80211_inf.c Projekt: eager7/linux-kernel

static INT CFG80211_VirtualIF_Open(PNET_DEV dev_p)
{
	VOID *pAdSrc;
	
	pAdSrc = RTMP_OS_NETDEV_GET_PRIV(dev_p);
	ASSERT(pAdSrc);
	PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
	
	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> %d,%s\n", __FUNCTION__, dev_p->ifindex, 
						RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

	//if (VIRTUAL_IF_UP(pAd) != 0)
	//	return -1;

	/* increase MODULE use count */
	RT_MOD_INC_USE_COUNT();

	if ((dev_p->ieee80211_ptr->iftype == RT_CMD_80211_IFTYPE_P2P_CLIENT) 
#ifdef CFG80211_MULTI_STA	
		|| (dev_p->ieee80211_ptr->iftype == RT_CMD_80211_IFTYPE_STATION)
#endif /* CFG80211_MULTI_STA */		
	   )
	{
		DBGPRINT(RT_DEBUG_TRACE, ("CFG80211_VirtualIF_Open\n"));
		pAd->flg_apcli_init = TRUE;
		ApCli_Open(pAd, dev_p);
		return 0;
	}

	RTMP_OS_NETDEV_START_QUEUE(dev_p);
	DBGPRINT(RT_DEBUG_TRACE, ("%s: <=== %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

	return 0;
}

Beispiel #5

Datei: cfg80211_inf.c Projekt: BenMueller/netgear-a6210-driver-dkms

static int CFG80211_VirtualIF_Open(PNET_DEV dev_p) {
	void *pAdSrc;
	PRTMP_ADAPTER pAd;
	pAdSrc = RtmpOsGetNetDevPriv(dev_p);
	ASSERT(pAdSrc);
	pAd = (PRTMP_ADAPTER)pAdSrc;

	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> %d,%s\n", __FUNCTION__,
			dev_p->ifindex, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

	//if (VIRTUAL_IF_UP(pAd) != 0)
	//	return -1;

	/* increase MODULE use count */
	RT_MOD_INC_USE_COUNT();

#ifdef RT_CFG80211_P2P_SUPPORT
	if (dev_p->ieee80211_ptr->iftype == RT_CMD_80211_IFTYPE_P2P_CLIENT) {
		DBGPRINT(RT_DEBUG_TRACE, ("CFG80211_VirtualIF_Open\n"));
		pAd->flg_apcli_init = TRUE;
		ApCli_Open(pAd, dev_p);
		return 0;
	}
#endif /* RT_CFG80211_P2P_SUPPORT */

	RTMP_OS_NETDEV_START_QUEUE(dev_p);
	DBGPRINT(RT_DEBUG_TRACE, ("%s: <=== %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

	return 0;
}

Beispiel #6

Datei: ap_wds_inf.c Projekt: 23171580/ralink

INT WdsVirtualIF_open(PNET_DEV dev)
{
	VOID *pAd;


	MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("%s: ===> VirtualIF_open\n", RTMP_OS_NETDEV_GET_DEVNAME(dev)));

	pAd = RTMP_OS_NETDEV_GET_PRIV(dev);
	if (VIRTUAL_IF_UP(pAd) != 0)
		return -1;

	/* increase MODULE use count */
	RT_MOD_INC_USE_COUNT();
	
	RTMP_OS_NETDEV_START_QUEUE(dev);
	return 0;
}

Beispiel #7

Datei: ap_wds_inf.c Projekt: jing-git/rt-n56u

INT WdsVirtualIF_open(
    IN	PNET_DEV dev)
{
    VOID			*pAd;

    DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> VirtualIF_open\n", RTMP_OS_NETDEV_GET_DEVNAME(dev)));


    pAd = RTMP_OS_NETDEV_GET_PRIV(dev);
    if (VIRTUAL_IF_UP(pAd) != 0)
        return -1;

    /* increase MODULE use count */
    RT_MOD_INC_USE_COUNT();

    RTMP_OS_NETDEV_START_QUEUE(dev);
    return 0;
}

Beispiel #8

Datei: cfg80211_inf.c Projekt: pierce1234/rt-n56u

static INT CFG80211_VirtualIF_Open(PNET_DEV dev_p)
{
	VOID *pAdSrc;
	
	pAdSrc = RTMP_OS_NETDEV_GET_PRIV(dev_p);
	ASSERT(pAdSrc);
	PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
	
	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> %d,%s\n", __FUNCTION__, dev_p->ifindex, 
						RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

	//if (VIRTUAL_IF_UP(pAd) != 0)
	//	return -1;

	/* increase MODULE use count */
	RT_MOD_INC_USE_COUNT();

#ifdef RT_CFG80211_P2P_SUPPORT
	if (dev_p->ieee80211_ptr->iftype == RT_CMD_80211_IFTYPE_P2P_CLIENT)
	{
		DBGPRINT(RT_DEBUG_TRACE, ("CFG80211_VirtualIF_Open\n"));
		pAd->flg_apcli_init = TRUE;
		ApCli_Open(pAd, dev_p);
		return 0;
	}
#endif /* RT_CFG80211_P2P_SUPPORT */

#ifdef CONFIG_SNIFFER_SUPPORT
#ifdef CONFIG_AP_SUPPORT
	if(dev_p->ieee80211_ptr->iftype == RT_CMD_80211_IFTYPE_MONITOR)
	{
		pAd->ApCfg.BssType = BSS_MONITOR;
		pAd->sniffer_ctl.sniffer_type = RADIOTAP_TYPE;
		AsicSetRxFilter(pAd);
	}
#endif /*CONFIG_AP_SUPPORT*/
#endif /* CONFIG_SNIFFER_SUPPORT */
	RTMP_OS_NETDEV_START_QUEUE(dev_p);
	DBGPRINT(RT_DEBUG_TRACE, ("%s: <=== %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

	return 0;
}

Beispiel #9

Datei: ap_mbss_inf.c Projekt: ulli-kroll/mt7612u

/*
========================================================================
Routine Description:
    Open a virtual network interface.

Arguments:
	pDev			which WLAN network interface

Return Value:
    0: open successfully
    otherwise: open fail

Note:
========================================================================
*/
INT MBSS_VirtualIF_Open(struct net_device *pDev)
{
	VOID *pAd;


	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> MBSSVirtualIF_open\n", RTMP_OS_NETDEV_GET_DEVNAME(pDev)));

	pAd = RTMP_OS_NETDEV_GET_PRIV(pDev);

	RTMP_AP_IoctlHandle(pAd, NULL, CMD_RTPRIV_IOCTL_MBSS_OPEN, 0, pDev, 0);

	if (VIRTUAL_IF_UP(pAd) != 0)
		return -1;

	/* increase MODULE use count */
	RT_MOD_INC_USE_COUNT();

	RTMP_OS_NETDEV_START_QUEUE(pDev);

	return 0;
}

Beispiel #10

Datei: cfg80211_inf.c Projekt: ulli-kroll/mt7612u

static INT CFG80211_VirtualIF_Open(struct net_device *dev_p)
{
	struct rtmp_adapter *pAd;

	pAd = RTMP_OS_NETDEV_GET_PRIV(dev_p);
	ASSERT(pAd);

	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> %d,%s\n", __FUNCTION__, dev_p->ifindex,
						RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

	//if (VIRTUAL_IF_UP(pAd) != 0)
	//	return -1;

	/* increase MODULE use count */
	RT_MOD_INC_USE_COUNT();

	RTMP_OS_NETDEV_START_QUEUE(dev_p);
	DBGPRINT(RT_DEBUG_TRACE, ("%s: <=== %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));

	return 0;
}

Beispiel #11

Datei: ap_wds_inf.c Projekt: qwerty1023/wive-rtnl-firmware

INT WdsVirtualIF_open(
	IN	PNET_DEV dev)
{
	PRTMP_ADAPTER	pAd;
#ifdef RTL865X_SOC
	INT				index;
	unsigned int 	linkid;
#endif

	DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> VirtualIF_open\n", RTMP_OS_NETDEV_GET_DEVNAME(dev)));


	pAd = RTMP_OS_NETDEV_GET_PRIV(dev);
	if (VIRTUAL_IF_UP(pAd) != 0)
		return -1;

	// increase MODULE use count
	RT_MOD_INC_USE_COUNT();
	
	RTMP_OS_NETDEV_START_QUEUE(dev);
	return 0;
}

Beispiel #12

Datei: cfg80211_inf.c Projekt: eager7/linux-kernel

static INT CFG80211_DummyP2pIf_Open(
	IN PNET_DEV		dev_p)
{
	struct wireless_dev *wdev = dev_p->ieee80211_ptr;
#ifdef RT_CFG80211_P2P_STATIC_CONCURRENT_DEVICE
	VOID *pAdSrc;
	printk("CFG80211_DummyP2pIf_Open=======> Open\n");
	pAdSrc = RTMP_OS_NETDEV_GET_PRIV(dev_p);
	PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdSrc;
#endif /* RT_CFG80211_P2P_STATIC_CONCURRENT_DEVICE */


	if (!wdev)
			return -EINVAL;	
			
	wdev->wiphy->interface_modes |= (BIT(NL80211_IFTYPE_P2P_CLIENT)
		| BIT(NL80211_IFTYPE_P2P_GO));		

#ifdef RT_CFG80211_P2P_STATIC_CONCURRENT_DEVICE
	RT_MOD_INC_USE_COUNT();

	RTMP_OS_NETDEV_START_QUEUE(dev_p);
    AsicSetBssid(pAd, pAd->cfg80211_ctrl.P2PCurrentAddress, 0x1);
    AsicSetDevMac(pAd, pAd->cfg80211_ctrl.P2PCurrentAddress, 0x1);

#endif /* RT_CFG80211_P2P_STATIC_CONCURRENT_DEVICE */
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,7,0))
        wdev->wiphy->interface_modes |=  BIT(RT_CMD_80211_IFTYPE_P2P_DEVICE);
#endif /* LINUX_VERSION_CODE: 3.7.0 */
	
#ifndef RT_CFG80211_P2P_STATIC_CONCURRENT_DEVICE
	wdev->iftype = RT_CMD_80211_IFTYPE_P2P_CLIENT;
#endif /* RT_CFG80211_P2P_STATIC_CONCURRENT_DEVICE */


	return 0;
}