void RB_DoShadowTessEnd( vec3_t lightPos )
{
#ifndef _XBOX
int i;
int numTris;
vec3_t lightDir;
// we can only do this if we have enough space in the vertex buffers
if ( tess.numVertexes >= SHADER_MAX_VERTEXES / 2 ) {
return;
}
if ( glConfig.stencilBits < 4 ) {
return;
}
#if 1 //controlled method - try to keep shadows in range so they don't show through so much -rww
vec3_t worldxyz;
vec3_t entLight;
float groundDist;
VectorCopy( backEnd.currentEntity->lightDir, entLight );
entLight[2] = 0.0f;
VectorNormalize(entLight);
//Oh well, just cast them straight down no matter what onto the ground plane.
//This presets no chance of screwups and still looks better than a stupid
//shader blob.
VectorSet(lightDir, entLight[0]*0.3f, entLight[1]*0.3f, 1.0f);
// project vertexes away from light direction
for ( i = 0 ; i < tess.numVertexes ; i++ ) {
//add or.origin to vert xyz to end up with world oriented coord, then figure
//out the ground pos for the vert to project the shadow volume to
VectorAdd(tess.xyz[i], backEnd.ori.origin, worldxyz);
groundDist = worldxyz[2] - backEnd.currentEntity->e.shadowPlane;
groundDist += 16.0f; //fudge factor
VectorMA( tess.xyz[i], -groundDist, lightDir, tess.xyz[i+tess.numVertexes] );
}
#else
if (lightPos)
{
for ( i = 0 ; i < tess.numVertexes ; i++ )
{
tess.xyz[i+tess.numVertexes][0] = tess.xyz[i][0]+(( tess.xyz[i][0]-lightPos[0] )*128.0f);
tess.xyz[i+tess.numVertexes][1] = tess.xyz[i][1]+(( tess.xyz[i][1]-lightPos[1] )*128.0f);
tess.xyz[i+tess.numVertexes][2] = tess.xyz[i][2]+(( tess.xyz[i][2]-lightPos[2] )*128.0f);
}
}
else
{
VectorCopy( backEnd.currentEntity->lightDir, lightDir );
// project vertexes away from light direction
for ( i = 0 ; i < tess.numVertexes ; i++ ) {
VectorMA( tess.xyz[i], -512, lightDir, tess.xyz[i+tess.numVertexes] );
}
}
#endif
// decide which triangles face the light
memset( numEdgeDefs, 0, 4 * tess.numVertexes );
numTris = tess.numIndexes / 3;
for ( i = 0 ; i < numTris ; i++ ) {
int i1, i2, i3;
vec3_t d1, d2, normal;
float *v1, *v2, *v3;
float d;
i1 = tess.indexes[ i*3 + 0 ];
i2 = tess.indexes[ i*3 + 1 ];
i3 = tess.indexes[ i*3 + 2 ];
v1 = tess.xyz[ i1 ];
v2 = tess.xyz[ i2 ];
v3 = tess.xyz[ i3 ];
if (!lightPos)
{
VectorSubtract( v2, v1, d1 );
VectorSubtract( v3, v1, d2 );
CrossProduct( d1, d2, normal );
d = DotProduct( normal, lightDir );
}
else
{
float planeEq[4];
planeEq[0] = v1[1]*(v2[2]-v3[2]) + v2[1]*(v3[2]-v1[2]) + v3[1]*(v1[2]-v2[2]);
planeEq[1] = v1[2]*(v2[0]-v3[0]) + v2[2]*(v3[0]-v1[0]) + v3[2]*(v1[0]-v2[0]);
planeEq[2] = v1[0]*(v2[1]-v3[1]) + v2[0]*(v3[1]-v1[1]) + v3[0]*(v1[1]-v2[1]);
planeEq[3] = -( v1[0]*( v2[1]*v3[2] - v3[1]*v2[2] ) +
v2[0]*(v3[1]*v1[2] - v1[1]*v3[2]) +
v3[0]*(v1[1]*v2[2] - v2[1]*v1[2]) );
d = planeEq[0]*lightPos[0]+
planeEq[1]*lightPos[1]+
planeEq[2]*lightPos[2]+
planeEq[3];
}
if ( d > 0 ) {
facing[ i ] = 1;
} else {
facing[ i ] = 0;
}
// create the edges
R_AddEdgeDef( i1, i2, facing[ i ] );
R_AddEdgeDef( i2, i3, facing[ i ] );
R_AddEdgeDef( i3, i1, facing[ i ] );
}
GL_Bind( tr.whiteImage );
//qglEnable( GL_CULL_FACE );
GL_State( GLS_SRCBLEND_ONE | GLS_DSTBLEND_ZERO );
#ifndef _DEBUG_STENCIL_SHADOWS
qglColor3f( 0.2f, 0.2f, 0.2f );
// don't write to the color buffer
qglColorMask( GL_FALSE, GL_FALSE, GL_FALSE, GL_FALSE );
qglEnable( GL_STENCIL_TEST );
qglStencilFunc( GL_ALWAYS, 1, 255 );
#else
qglColor3f( 1.0f, 0.0f, 0.0f );
qglPolygonMode(GL_FRONT_AND_BACK, GL_LINE);
//qglDisable(GL_DEPTH_TEST);
#endif
#ifdef _STENCIL_REVERSE
qglDepthFunc(GL_LESS);
//now using the Carmack Reverse<tm> -rww
if ( backEnd.viewParms.isMirror ) {
//qglCullFace( GL_BACK );
GL_Cull(CT_BACK_SIDED);
qglStencilOp( GL_KEEP, GL_INCR, GL_KEEP );
R_RenderShadowEdges();
//qglCullFace( GL_FRONT );
GL_Cull(CT_FRONT_SIDED);
qglStencilOp( GL_KEEP, GL_DECR, GL_KEEP );
R_RenderShadowEdges();
} else {
//qglCullFace( GL_FRONT );
GL_Cull(CT_FRONT_SIDED);
qglStencilOp( GL_KEEP, GL_INCR, GL_KEEP );
R_RenderShadowEdges();
//qglCullFace( GL_BACK );
GL_Cull(CT_BACK_SIDED);
qglStencilOp( GL_KEEP, GL_DECR, GL_KEEP );
R_RenderShadowEdges();
}
qglDepthFunc(GL_LEQUAL);
#else
// mirrors have the culling order reversed
if ( backEnd.viewParms.isMirror ) {
qglCullFace( GL_FRONT );
qglStencilOp( GL_KEEP, GL_KEEP, GL_INCR );
R_RenderShadowEdges();
qglCullFace( GL_BACK );
qglStencilOp( GL_KEEP, GL_KEEP, GL_DECR );
R_RenderShadowEdges();
} else {
qglCullFace( GL_BACK );
qglStencilOp( GL_KEEP, GL_KEEP, GL_INCR );
R_RenderShadowEdges();
qglCullFace( GL_FRONT );
qglStencilOp( GL_KEEP, GL_KEEP, GL_DECR );
R_RenderShadowEdges();
}
#endif
// reenable writing to the color buffer
qglColorMask( GL_TRUE, GL_TRUE, GL_TRUE, GL_TRUE );
#ifdef _DEBUG_STENCIL_SHADOWS
qglPolygonMode(GL_FRONT_AND_BACK, GL_FILL);
#endif
#endif // _XBOX
}
/*
=================
RB_ShadowTessEnd
triangleFromEdge[ v1 ][ v2 ]
set triangle from edge( v1, v2, tri )
if ( facing[ triangleFromEdge[ v1 ][ v2 ] ] && !facing[ triangleFromEdge[ v2 ][ v1 ] ) {
}
=================
*/
void RB_ShadowTessEnd( void ) {
int i;
int numTris;
vec3_t lightDir;
GLboolean rgba[4];
if ( glConfig.stencilBits < 4 ) {
return;
}
VectorCopy( backEnd.currentEntity->lightDir, lightDir );
// project vertexes away from light direction
for ( i = 0 ; i < tess.numVertexes ; i++ ) {
VectorMA( tess.xyz[i], -512, lightDir, shadowXyz[i] );
}
// decide which triangles face the light
Com_Memset( numEdgeDefs, 0, 4 * tess.numVertexes );
numTris = tess.numIndexes / 3;
for ( i = 0 ; i < numTris ; i++ ) {
int i1, i2, i3;
vec3_t d1, d2, normal;
float *v1, *v2, *v3;
float d;
i1 = tess.indexes[ i*3 + 0 ];
i2 = tess.indexes[ i*3 + 1 ];
i3 = tess.indexes[ i*3 + 2 ];
v1 = tess.xyz[ i1 ];
v2 = tess.xyz[ i2 ];
v3 = tess.xyz[ i3 ];
VectorSubtract( v2, v1, d1 );
VectorSubtract( v3, v1, d2 );
CrossProduct( d1, d2, normal );
d = DotProduct( normal, lightDir );
if ( d > 0 ) {
facing[ i ] = 1;
} else {
facing[ i ] = 0;
}
// create the edges
R_AddEdgeDef( i1, i2, facing[ i ] );
R_AddEdgeDef( i2, i3, facing[ i ] );
R_AddEdgeDef( i3, i1, facing[ i ] );
}
// draw the silhouette edges
GL_Bind( tr.whiteImage );
GL_State( GLS_SRCBLEND_ONE | GLS_DSTBLEND_ZERO );
qglColor3f( 0.2f, 0.2f, 0.2f );
// don't write to the color buffer
qglGetBooleanv(GL_COLOR_WRITEMASK, rgba);
qglColorMask( GL_FALSE, GL_FALSE, GL_FALSE, GL_FALSE );
qglEnable( GL_STENCIL_TEST );
qglStencilFunc( GL_ALWAYS, 1, 255 );
GL_Cull( CT_BACK_SIDED );
qglStencilOp( GL_KEEP, GL_KEEP, GL_INCR );
R_RenderShadowEdges();
GL_Cull( CT_FRONT_SIDED );
qglStencilOp( GL_KEEP, GL_KEEP, GL_DECR );
R_RenderShadowEdges();
// reenable writing to the color buffer
qglColorMask(rgba[0], rgba[1], rgba[2], rgba[3]);
}
/*
=================
RB_ShadowTessEnd
triangleFromEdge[ v1 ][ v2 ]
set triangle from edge( v1, v2, tri )
if ( facing[ triangleFromEdge[ v1 ][ v2 ] ] && !facing[ triangleFromEdge[ v2 ][ v1 ] ) {
}
=================
*/
void RB_ShadowTessEnd( void ) {
int i;
int numTris;
vec3_t lightDir;
// we can only do this if we have enough space in the vertex buffers
if ( tess.numVertexes >= SHADER_MAX_VERTEXES / 2 ) {
return;
}
if ( glConfig.stencilBits < 4 ) {
return;
}
VectorCopy( backEnd.currentEntity->lightDir, lightDir );
// project vertexes away from light direction
for ( i = 0 ; i < tess.numVertexes ; i++ ) {
VectorMA( tess.xyz[i], -512, lightDir, tess.xyz[i + tess.numVertexes] );
}
// decide which triangles face the light
memset( numEdgeDefs, 0, 4 * tess.numVertexes );
numTris = tess.numIndexes / 3;
for ( i = 0 ; i < numTris ; i++ ) {
int i1, i2, i3;
vec3_t d1, d2, normal;
float *v1, *v2, *v3;
float d;
i1 = tess.indexes[ i * 3 + 0 ];
i2 = tess.indexes[ i * 3 + 1 ];
i3 = tess.indexes[ i * 3 + 2 ];
v1 = tess.xyz[ i1 ];
v2 = tess.xyz[ i2 ];
v3 = tess.xyz[ i3 ];
VectorSubtract( v2, v1, d1 );
VectorSubtract( v3, v1, d2 );
CrossProduct( d1, d2, normal );
d = DotProduct( normal, lightDir );
if ( d > 0 ) {
facing[ i ] = 1;
} else {
facing[ i ] = 0;
}
// create the edges
R_AddEdgeDef( i1, i2, facing[ i ] );
R_AddEdgeDef( i2, i3, facing[ i ] );
R_AddEdgeDef( i3, i1, facing[ i ] );
}
// draw the silhouette edges
GL_Bind( tr.whiteImage );
qglEnable( GL_CULL_FACE );
GL_State( GLS_SRCBLEND_ONE | GLS_DSTBLEND_ZERO );
qglColor3f( 0.2f, 0.2f, 0.2f );
// don't write to the color buffer
qglColorMask( GL_FALSE, GL_FALSE, GL_FALSE, GL_FALSE );
qglEnable( GL_STENCIL_TEST );
qglStencilFunc( GL_ALWAYS, 1, 255 );
// mirrors have the culling order reversed
if ( backEnd.viewParms.isMirror ) {
qglCullFace( GL_FRONT );
qglStencilOp( GL_KEEP, GL_KEEP, GL_INCR );
R_RenderShadowEdges();
qglCullFace( GL_BACK );
qglStencilOp( GL_KEEP, GL_KEEP, GL_DECR );
R_RenderShadowEdges();
} else {
qglCullFace( GL_BACK );
qglStencilOp( GL_KEEP, GL_KEEP, GL_INCR );
R_RenderShadowEdges();
qglCullFace( GL_FRONT );
qglStencilOp( GL_KEEP, GL_KEEP, GL_DECR );
R_RenderShadowEdges();
}
// reenable writing to the color buffer
qglColorMask( GL_TRUE, GL_TRUE, GL_TRUE, GL_TRUE );
}
/*
=================
RB_ShadowTessEnd
triangleFromEdge[ v1 ][ v2 ]
set triangle from edge( v1, v2, tri )
if ( facing[ triangleFromEdge[ v1 ][ v2 ] ] && !facing[ triangleFromEdge[ v2 ][ v1 ] ) {
}
=================
*/
void RB_ShadowTessEnd( void ) {
int i;
int numTris;
vec3_t lightDir;
GLboolean rgba[4];
// we can only do this if we have enough space in the vertex buffers
if ( tess.numVertexes >= SHADER_MAX_VERTEXES / 2 ) {
return;
}
if ( glConfig.stencilBits < 4 ) {
return;
}
VectorCopy( backEnd.currentEntity->lightDir, lightDir );
// project vertexes away from light direction
for ( i = 0 ; i < tess.numVertexes ; i++ ) {
VectorMA( tess.xyz[i], -512, lightDir, tess.xyz[i+tess.numVertexes] );
}
// decide which triangles face the light
Com_Memset( numEdgeDefs, 0, 4 * tess.numVertexes );
numTris = tess.numIndexes / 3;
for ( i = 0 ; i < numTris ; i++ ) {
int i1, i2, i3;
vec3_t d1, d2, normal;
float *v1, *v2, *v3;
float d;
i1 = tess.indexes[ i*3 + 0 ];
i2 = tess.indexes[ i*3 + 1 ];
i3 = tess.indexes[ i*3 + 2 ];
v1 = tess.xyz[ i1 ];
v2 = tess.xyz[ i2 ];
v3 = tess.xyz[ i3 ];
VectorSubtract( v2, v1, d1 );
VectorSubtract( v3, v1, d2 );
CrossProduct( d1, d2, normal );
d = DotProduct( normal, lightDir );
if ( d > 0 ) {
facing[ i ] = 1;
} else {
facing[ i ] = 0;
}
// create the edges
R_AddEdgeDef( i1, i2, facing[ i ] );
R_AddEdgeDef( i2, i3, facing[ i ] );
R_AddEdgeDef( i3, i1, facing[ i ] );
}
// draw the silhouette edges
GL_Bind( tr.whiteImage );
qglEnable( GL_CULL_FACE );
GL_State( GLS_SRCBLEND_ONE | GLS_DSTBLEND_ZERO );
qglColor3f( 0.2f, 0.2f, 0.2f );
// don't write to the color buffer
qglGetBooleanv(GL_COLOR_WRITEMASK, rgba);
qglColorMask( GL_FALSE, GL_FALSE, GL_FALSE, GL_FALSE );
qglEnable( GL_STENCIL_TEST );
qglStencilFunc( GL_ALWAYS, 1, 255 );
#ifdef HAVE_GLES
qglVertexPointer (3, GL_FLOAT, 16, tess.xyz);
GLboolean text = qglIsEnabled(GL_TEXTURE_COORD_ARRAY);
GLboolean glcol = qglIsEnabled(GL_COLOR_ARRAY);
if (text)
qglDisableClientState( GL_TEXTURE_COORD_ARRAY );
if (glcol)
qglDisableClientState( GL_COLOR_ARRAY );
#endif
// mirrors have the culling order reversed
if ( backEnd.viewParms.isMirror ) {
qglCullFace( GL_FRONT );
qglStencilOp( GL_KEEP, GL_KEEP, GL_INCR );
R_RenderShadowEdges();
qglCullFace( GL_BACK );
qglStencilOp( GL_KEEP, GL_KEEP, GL_DECR );
#ifdef HAVE_GLES
qglDrawElements(GL_TRIANGLES, idx, GL_UNSIGNED_SHORT, indexes);
#else
R_RenderShadowEdges();
#endif
} else {
qglCullFace( GL_BACK );
qglStencilOp( GL_KEEP, GL_KEEP, GL_INCR );
R_RenderShadowEdges();
qglCullFace( GL_FRONT );
qglStencilOp( GL_KEEP, GL_KEEP, GL_DECR );
#ifdef HAVE_GLES
qglDrawElements(GL_TRIANGLES, idx, GL_UNSIGNED_SHORT, indexes);
#else
R_RenderShadowEdges();
#endif
}
#ifdef HAVE_GLES
if (text)
qglEnableClientState( GL_TEXTURE_COORD_ARRAY );
if (glcol)
qglEnableClientState( GL_COLOR_ARRAY );
#endif
// reenable writing to the color buffer
qglColorMask(rgba[0], rgba[1], rgba[2], rgba[3]);
}
