/////////////////////////////////////////////////////////////////////////////
// Local encoder callback function
// Should return:
// 1 if value has been changed
// 0 if value hasn't been changed
// -1 if invalid or unsupported encoder
/////////////////////////////////////////////////////////////////////////////
static s32 Encoder_Handler(seq_ui_encoder_t encoder, s32 incrementer)
{
#if 0
// leads to: comparison is always true due to limited range of data type
if( (encoder >= SEQ_UI_ENCODER_GP1 && encoder <= SEQ_UI_ENCODER_GP16) ) {
#else
if( encoder <= SEQ_UI_ENCODER_GP16 ) {
#endif
last_bookmark = encoder;
SEQ_UI_Bookmark_Restore(last_bookmark);
return 1;
}
// all other encoders
return -1;
}
/////////////////////////////////////////////////////////////////////////////
// button callback function
// Also used by SEQ_UI_Button_DirectBookmark
// Should return:
// 1 if value has been changed
// 0 if value hasn't been changed
// -1 if invalid or unsupported button
/////////////////////////////////////////////////////////////////////////////
s32 SEQ_UI_BOOKMARKS_Button_Handler(seq_ui_button_t button, s32 depressed)
{
#if 0
// leads to: comparison is always true due to limited range of data type
if( (button >= SEQ_UI_BUTTON_GP1 && button <= SEQ_UI_BUTTON_GP16) ) {
#else
if( button <= SEQ_UI_BUTTON_GP16 ) {
#endif
if( depressed ) {
SEQ_UI_UnInstallDelayedActionCallback(Button_StoreRequest);
if( store_state == 1 ) { // depressed within 1 second: select bookmark
SEQ_UI_Bookmark_Restore(last_bookmark);
}
return 0;
}
last_bookmark = button;
store_state = 1;
SEQ_UI_InstallDelayedActionCallback(Button_StoreRequest, 500, 0);
return 1;
}
#if 0
// doesn't make much sense here
switch( button ) {
case SEQ_UI_BUTTON_Select:
case SEQ_UI_BUTTON_Right:
case SEQ_UI_BUTTON_Up:
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, 1);
case SEQ_UI_BUTTON_Left:
case SEQ_UI_BUTTON_Down:
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, -1);
}
#endif
return -1; // invalid or unsupported button
}
/////////////////////////////////////////////////////////////////////////////
// Local Display Handler function
// IN: <high_prio>: if set, a high-priority LCD update is requested
/////////////////////////////////////////////////////////////////////////////
static s32 LCD_Handler(u8 high_prio)
{
if( high_prio )
return 0; // there are no high-priority updates
// layout:
// 00000000001111111111222222222233333333330000000000111111111122222222223333333333
// 01234567890123456789012345678901234567890123456789012345678901234567890123456789
// <--------------------------------------><-------------------------------------->
// Global Bookmarks Session Bookmarks
// BM 1 BM 2 BM 3 BM 4 BM 5 BM 6 BM 7 BM 8 BM 9 BM10 BM11 BM12 BM13 BM14 BM15 BM16
SEQ_LCD_CursorSet(0, 0);
SEQ_LCD_PrintString(" Global Bookmarks Session Bookmarks ");
SEQ_LCD_CursorSet(0, 1);
int i;
for(i=0; i<SEQ_UI_BOOKMARKS_NUM; ++i) {
if( i >= 16 )
break; // just to ensure...
seq_ui_bookmark_t *bm = (seq_ui_bookmark_t *)&seq_ui_bookmarks[i];
if( ui_cursor_flash && (i == last_bookmark) )
SEQ_LCD_PrintSpaces(5);
else
SEQ_LCD_PrintStringPadded(bm->name, 5);
}
return 0; // no error
}
/////////////////////////////////////////////////////////////////////////////
// Initialisation
/////////////////////////////////////////////////////////////////////////////
s32 SEQ_UI_BOOKMARKS_Init(u32 mode)
{
// install callback routines
SEQ_UI_InstallButtonCallback(SEQ_UI_BOOKMARKS_Button_Handler);
SEQ_UI_InstallEncoderCallback(Encoder_Handler);
SEQ_UI_InstallLEDCallback(LED_Handler);
SEQ_UI_InstallLCDCallback(LCD_Handler);
store_state = 0;
return 0; // no error
}
/////////////////////////////////////////////////////////////////////////////
// help function for delayed store action
/////////////////////////////////////////////////////////////////////////////
static void Button_StoreRequest(u32 state)
{
if( store_state == 1 ) {
SEQ_UI_Msg(last_bookmark >= 8 ? SEQ_UI_MSG_DELAYED_ACTION_R : SEQ_UI_MSG_DELAYED_ACTION, 2001,
"Hold Button", "to store Bookmark!");
SEQ_UI_InstallDelayedActionCallback(Button_StoreRequest, 2000, 0);
store_state = 2;
} else {
store_state = 0;
// store into selected slot
SEQ_UI_Bookmark_Store(last_bookmark);
SEQ_UI_Msg(last_bookmark >= 8 ? SEQ_UI_MSG_USER_R : SEQ_UI_MSG_USER, 2000,
"Storing", "Bookmark!");
#if !defined(MIOS32_FAMILY_EMULATION)
// this yield ensures, that the display will be updated before storing the file
taskYIELD();
#endif
// and store file
MUTEX_SDCARD_TAKE;
s32 error = SEQ_FILE_BM_Write(seq_file_session_name, (last_bookmark < 8) ? 1 : 0);
MUTEX_SDCARD_GIVE;
if( error < 0 )
SEQ_UI_SDCardErrMsg(2000, error);
else {
// return to bookmarked page
SEQ_UI_PageSet((seq_ui_page_t)seq_ui_bookmarks[last_bookmark].page);
// and print message
SEQ_UI_Msg(last_bookmark >= 8 ? SEQ_UI_MSG_USER_R : SEQ_UI_MSG_USER, 2000,
"Bookmark", "stored!");
}
}
}
/////////////////////////////////////////////////////////////////////////////
// Local Display Handler function
// IN: <high_prio>: if set, a high-priority LCD update is requested
/////////////////////////////////////////////////////////////////////////////
static s32 LCD_Handler(u8 high_prio)
{
// layout:
// 00000000001111111111222222222233333333330000000000111111111122222222223333333333
// 01234567890123456789012345678901234567890123456789012345678901234567890123456789
// <--------------------------------------><-------------------------------------->
// USB1 USB2 USB3 USB4 IN1 IN2 IN3 IN4 OSC1 OSC2 OSC3 OSC4
// USB1 USB2 USB3 USB4 OUT1 OUT2 OUT3 OUT4 IIC1 IIC2 IIC3 IIC4 OSC1 OSC2 OSC3 OSC4
// Filter Filter
// MIDI Clock: on Active Sense: on
if( seq_ui_button_state.SELECT_PRESSED ) {
if( high_prio )
return 0;
seq_midi_port_mon_filter_t mon_filter = SEQ_MIDI_PORT_MonFilterGet();
SEQ_LCD_CursorSet(0, 0);
SEQ_LCD_PrintSpaces(2);
SEQ_LCD_PrintString("Filter");
SEQ_LCD_PrintSpaces(15);
SEQ_LCD_PrintString("Filter");
SEQ_LCD_PrintSpaces(11 + 40);
SEQ_LCD_CursorSet(0, 1);
SEQ_LCD_PrintFormattedString("MIDI Clock: %s", mon_filter.MIDI_CLOCK ? "on " : "off");
SEQ_LCD_PrintSpaces(5);
SEQ_LCD_PrintFormattedString("Active Sense: %s", mon_filter.ACTIVE_SENSE ? "on " : "off");
SEQ_LCD_PrintSpaces(3 + 40);
}
///////////////////////////////////////////////////////////////////////////
u8 port_num = SEQ_MIDI_PORT_OutNumGet();
if( port_num > 17 )
port_num = 17;
u8 port_ix;
if( high_prio ) {
u16 in_activity = 0;
u16 out_activity = 0;
for(port_ix=1; port_ix<port_num; ++port_ix) {
SEQ_LCD_CursorSet(5*(port_ix-1), 0);
// dirty! but only way to ensure that OSC1..OSC4 are aligned
if( port_ix >= 9 && port_ix <= 12 ) {
SEQ_LCD_PrintSpaces(5);
} else {
u8 port_ix_midi_in = (port_ix >= 9) ? (port_ix - 4) : port_ix;
mios32_midi_port_t port = SEQ_MIDI_PORT_InPortGet(port_ix_midi_in);
mios32_midi_package_t package = SEQ_MIDI_PORT_InPackageGet(port);
if( port == 0xff ) {
SEQ_LCD_PrintSpaces(5);
} else if( package.type ) {
SEQ_LCD_PrintEvent(package, 5);
in_activity |= (1 << (port_ix-1));
} else {
SEQ_LCD_PrintString(SEQ_MIDI_PORT_InNameGet(port_ix_midi_in));
SEQ_LCD_PrintChar(' ');
}
}
SEQ_LCD_CursorSet(5*(port_ix-1), 1);
mios32_midi_port_t port = SEQ_MIDI_PORT_OutPortGet(port_ix);
mios32_midi_package_t package = SEQ_MIDI_PORT_OutPackageGet(port);
if( port == 0xff ) {
SEQ_LCD_PrintSpaces(5);
} else if( package.type ) {
SEQ_LCD_PrintEvent(package, 5);
out_activity |= (1 << (port_ix-1));
} else {
SEQ_LCD_PrintString(SEQ_MIDI_PORT_OutNameGet(port_ix));
SEQ_LCD_PrintChar(' ');
}
}
midi_activity = in_activity | out_activity;
return 0;
}
return 0; // no error
}
/////////////////////////////////////////////////////////////////////////////
// Local button callback function
// Should return:
// 1 if value has been changed
// 0 if value hasn't been changed
// -1 if invalid or unsupported button
/////////////////////////////////////////////////////////////////////////////
static s32 Button_Handler(seq_ui_button_t button, s32 depressed)
{
if( depressed ) return 0; // ignore when button depressed
#if 0
// leads to: comparison is always true due to limited range of data type
if( button >= SEQ_UI_BUTTON_GP1 && button <= SEQ_UI_BUTTON_GP16 ) {
#else
if( button <= SEQ_UI_BUTTON_GP16 ) {
#endif
// re-use encoder handler - only select UI item, don't increment, flags will be toggled
return Encoder_Handler((int)button, 0);
}
// remaining buttons:
switch( button ) {
case SEQ_UI_BUTTON_Select:
case SEQ_UI_BUTTON_Right:
if( ++ui_selected_item >= NUM_OF_ITEMS )
ui_selected_item = 0;
SetSubpageBasedOnItem(ui_selected_item);
return 1; // value always changed
case SEQ_UI_BUTTON_Left:
if( ui_selected_item == 0 )
ui_selected_item = NUM_OF_ITEMS-1;
else
--ui_selected_item;
SetSubpageBasedOnItem(ui_selected_item);
return 1; // value always changed
case SEQ_UI_BUTTON_Up:
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, 1);
case SEQ_UI_BUTTON_Down:
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, -1);
}
return -1; // invalid or unsupported button
}
/////////////////////////////////////////////////////////////////////////////
// Local Display Handler function
// IN: <high_prio>: if set, a high-priority LCD update is requested
/////////////////////////////////////////////////////////////////////////////
static s32 LCD_Handler(u8 high_prio)
{
if( high_prio )
return 0; // there are no high-priority updates
// layout:
// 00000000001111111111222222222233333333330000000000111111111122222222223333333333
// 01234567890123456789012345678901234567890123456789012345678901234567890123456789
// <--------------------------------------><-------------------------------------->
// Transposer Section MIDI Ext. Bus Port Chn. Lower/Upper Mode Reset
// and Arp. Control Router Ctrl Misc. 1 IN1 #16 --- --- T&A Stacks
// Transposer Section MIDI Ext. Port Chn. G1 G2 G3 G4 Fwd Reset
// and Arp. Control Router Ctrl Misc. All #16 C-1 C-2 C-3 C-4 USB1 Stcks
// Transposer Section MIDI Ext. Node IN P/Chn OUT P/Chn | DefaultPort
// and Arp. Control Router Ctrl Misc. #1 Def. All Def. # 1 | USB1
// Transposer Section MIDI Ext. Port Chn. Function CC#
// Transposer Section MIDI Ext. IN OUT Chn.| Function CC#
// and Arp. Control Router Ctrl Misc. All off --- | Morph Value 1
// Transposer Section MIDI Ext. BLM_SCALAR MIDI
// and Arp. Control Router Ctrl Misc.Port: OUT2 Monitor
seq_midi_router_node_t *n = &seq_midi_router_node[selected_router_node];
///////////////////////////////////////////////////////////////////////////
//<<<<<<< .mine
/*
const char leftpage[2][41] = {
"Transposer Section MIDI ",
" and Arp. Control Router Misc. "
};
=======
*/
SEQ_LCD_CursorSet(0, 0);
SEQ_LCD_PrintString("Transposer Section MIDI Ext. ");
SEQ_LCD_CursorSet(0, 1);
SEQ_LCD_PrintString(" and Arp. Control Router Ctrl Misc.");
//>>>>>>> .r1826
if( ui_cursor_flash && selected_subpage <= 5 ) {
const u8 select_pos1[5] = { 0, 10, 20, 30, 35 };
const u8 select_width[5] = { 10, 10, 10, 5, 5 };
int line;
for(line=0; line<2; ++line) {
SEQ_LCD_CursorSet(select_pos1[selected_subpage], line);
SEQ_LCD_PrintSpaces(select_width[selected_subpage]);
}
}
/*
SEQ_LCD_CursorSet(0, 0);
if (selected_subpage == SUBPAGE_TRANSPOSE && ui_cursor_flash) {
SEQ_LCD_PrintSpaces(21);
} else {
SEQ_LCD_PrintString(" Transposer and Arp ");
}
SEQ_LCD_CursorSet(0, 1);
if (selected_subpage == SUBPAGE_SECTIONS && ui_cursor_flash) {
SEQ_LCD_PrintSpaces(21);
} else {
SEQ_LCD_PrintString(" Section control ");
}
SEQ_LCD_CursorSet(0, 2);
if (selected_subpage == SUBPAGE_ROUTER && ui_cursor_flash) {
SEQ_LCD_PrintSpaces(21);
} else {
SEQ_LCD_PrintString(" MIDI router ");
}
SEQ_LCD_CursorSet(0, 3);
if (selected_subpage == SUBPAGE_MISC && ui_cursor_flash) {
SEQ_LCD_PrintSpaces(21);
} else {
SEQ_LCD_PrintString(" Miscilenious ");
}
*/
SEQ_LCD_CursorSet(0, 4);
switch( selected_subpage ) {
///////////////////////////////////////////////////////////////////////////
case SUBPAGE_TRANSPOSE: {
//SEQ_LCD_CursorSet(40, 0);
SEQ_LCD_PrintString(" Bus Port Chn. Mode ");
SEQ_LCD_CursorSet(0, 6);
SEQ_LCD_PrintString(" Lower/Upper Reset ");
SEQ_LCD_CursorSet(0, 5);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_IN_BUS && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
SEQ_LCD_PrintFormattedString(" %d ", selected_bus+1);
}
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_IN_PORT && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
if( seq_midi_in_port[selected_bus] )
SEQ_LCD_PrintString(SEQ_MIDI_PORT_InNameGet(SEQ_MIDI_PORT_InIxGet(seq_midi_in_port[selected_bus])));
else
SEQ_LCD_PrintString(" All");
}
SEQ_LCD_PrintSpaces(1);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_IN_CHN && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
if( seq_midi_in_channel[selected_bus] )
SEQ_LCD_PrintFormattedString("#%2d", seq_midi_in_channel[selected_bus]);
else
SEQ_LCD_PrintString("---");
}
SEQ_LCD_PrintSpaces(3);
/*
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_IN_MODE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintString(seq_midi_in_options[selected_bus].MODE_PLAY ? "Play" : "T&A ");
}
SEQ_LCD_PrintSpaces(3);
SEQ_LCD_CursorSet(0, 7);
*/
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_IN_LOWER && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintNote(seq_midi_in_lower[selected_bus]);
}
SEQ_LCD_PrintSpaces(3);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_IN_UPPER && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintNote(seq_midi_in_upper[selected_bus]);
}
SEQ_LCD_PrintSpaces(2);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_IN_MODE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintString(seq_midi_in_options[selected_bus].MODE_PLAY ? "Play" : "T&A ");
}
SEQ_LCD_PrintSpaces(3);
SEQ_LCD_PrintString("Stacks");
} break;
///////////////////////////////////////////////////////////////////////////
case SUBPAGE_SECTIONS: {
//SEQ_LCD_CursorSet(40, 0);
SEQ_LCD_PrintString(" Port Chn. G1 G2 ");
SEQ_LCD_CursorSet(0, 6);
SEQ_LCD_PrintString(" G3 G4 Fwd Reset ");
SEQ_LCD_CursorSet(0, 5);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_S_PORT && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
if( seq_midi_in_sect_port )
SEQ_LCD_PrintString(SEQ_MIDI_PORT_InNameGet(SEQ_MIDI_PORT_InIxGet(seq_midi_in_sect_port)));
else
SEQ_LCD_PrintString(" All");
}
SEQ_LCD_PrintSpaces(1);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_S_CHN && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
if( seq_midi_in_sect_channel )
SEQ_LCD_PrintFormattedString("#%2d", seq_midi_in_sect_channel);
else
SEQ_LCD_PrintString("---");
}
SEQ_LCD_PrintSpaces(2);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_S_OCT_G1 && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintNote(seq_midi_in_sect_note[0]);
}
SEQ_LCD_PrintSpaces(2);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_S_OCT_G2 && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintNote(seq_midi_in_sect_note[1]);
}
SEQ_LCD_PrintSpaces(2);
SEQ_LCD_CursorSet(0, 5);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_S_OCT_G3 && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintNote(seq_midi_in_sect_note[2]);
}
SEQ_LCD_PrintSpaces(2);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_S_OCT_G4 && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintNote(seq_midi_in_sect_note[3]);
}
SEQ_LCD_PrintSpaces(2);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_S_FWD_PORT && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
if( seq_midi_in_sect_fwd_port == 0 )
SEQ_LCD_PrintString("----");
else
SEQ_LCD_PrintString(SEQ_MIDI_PORT_OutNameGet(SEQ_MIDI_PORT_OutIxGet(seq_midi_in_sect_fwd_port)));
}
SEQ_LCD_PrintSpaces(1);
SEQ_LCD_PrintString("Stcks");
} break;
///////////////////////////////////////////////////////////////////////////
case SUBPAGE_ROUTER: {
//<<<<<<< .mine
//SEQ_LCD_CursorSet(40, 0);
SEQ_LCD_PrintString(" Node IN Port/Chn ");
SEQ_LCD_CursorSet(0, 6);
SEQ_LCD_PrintString("OUT Port/Chn Def.Port");
SEQ_LCD_CursorSet(0, 5);
/*
=======
SEQ_LCD_CursorSet(40, 0);
SEQ_LCD_PrintString("Node IN P/Chn OUT P/Chn | DefaultPort");
SEQ_LCD_CursorSet(40, 1);
>>>>>>> .r1826
*/
///////////////////////////////////////////////////////////////////////
SEQ_LCD_PrintSpaces(1);
if( ui_selected_item == ITEM_R_NODE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintFormattedString("#%2d", selected_router_node+1);
}
SEQ_LCD_PrintSpaces(1);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_R_SRC_PORT && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintString(SEQ_MIDI_PORT_InNameGet(SEQ_MIDI_PORT_InIxGet(n->src_port)));
}
SEQ_LCD_PrintSpaces(1);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_R_SRC_CHN && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
if( !n->src_chn ) {
SEQ_LCD_PrintString("---");
} else if( n->src_chn > 16 ) {
SEQ_LCD_PrintString("All");
} else {
SEQ_LCD_PrintFormattedString("#%2d", n->src_chn);
}
}
SEQ_LCD_PrintSpaces(2);
SEQ_LCD_CursorSet(0, 7);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_R_DST_PORT && ui_cursor_flash ) {
if( n->dst_chn >= 18 ) {
SEQ_LCD_PrintSpaces(2);
} else {
SEQ_LCD_PrintSpaces(4);
}
} else {
if( n->dst_chn >= 18 ) {
SEQ_LCD_PrintSpaces(2);
} else {
SEQ_LCD_PrintString(SEQ_MIDI_PORT_OutNameGet(SEQ_MIDI_PORT_OutIxGet(n->dst_port)));
}
}
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_R_DST_CHN && ui_cursor_flash ) {
if( n->dst_chn >= 18 ) {
SEQ_LCD_PrintSpaces(7);
} else {
SEQ_LCD_PrintSpaces(5);
}
} else {
if( !n->dst_chn ) {
SEQ_LCD_PrintString(" --- ");
} else if( n->dst_chn == 17 ) {
SEQ_LCD_PrintString(" All ");
} else if( n->dst_chn == 18 ) {
SEQ_LCD_PrintString(" Track");
} else if( n->dst_chn >= 19 ) {
SEQ_LCD_PrintString("Sel.Trk");
} else {
SEQ_LCD_PrintFormattedString(" #%2d ", n->dst_chn);
}
}
SEQ_LCD_PrintSpaces(3);
///////////////////////////////////////////////////////////////////////
SEQ_LCD_PrintChar('|');
SEQ_LCD_PrintSpaces(4);
if( ui_selected_item == ITEM_DEF_PORT && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintString(SEQ_MIDI_PORT_OutNameGet(SEQ_MIDI_PORT_OutIxGet(MIOS32_MIDI_DefaultPortGet())));
}
SEQ_LCD_PrintSpaces(4);
} break;
///////////////////////////////////////////////////////////////////////////
case SUBPAGE_EXT_CTRL: {
SEQ_LCD_CursorSet(40, 0);
SEQ_LCD_PrintString(" IN OUT Chn.|Function ");
if( selected_ext_ctrl < SEQ_MIDI_IN_EXT_CTRL_NUM_IX_CC ) {
SEQ_LCD_PrintString("CC# ");
} else {
SEQ_LCD_PrintSpaces(10);
}
SEQ_LCD_CursorSet(40, 1);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_EXT_PORT && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
if( seq_midi_in_ext_ctrl_port == 0xff )
SEQ_LCD_PrintString(" All");
else if( !seq_midi_in_ext_ctrl_port )
SEQ_LCD_PrintString(" off");
else
SEQ_LCD_PrintString(SEQ_MIDI_PORT_InNameGet(SEQ_MIDI_PORT_InIxGet(seq_midi_in_ext_ctrl_port)));
}
SEQ_LCD_PrintSpaces(1);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_EXT_PORT_OUT && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
if( seq_midi_in_ext_ctrl_out_port )
SEQ_LCD_PrintString(SEQ_MIDI_PORT_OutNameGet(SEQ_MIDI_PORT_OutIxGet(seq_midi_in_ext_ctrl_out_port)));
else
SEQ_LCD_PrintString("off ");
}
SEQ_LCD_PrintSpaces(1);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_EXT_CHN && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
if( seq_midi_in_ext_ctrl_channel )
SEQ_LCD_PrintFormattedString("#%2d", seq_midi_in_ext_ctrl_channel);
else
SEQ_LCD_PrintString("---");
}
SEQ_LCD_PrintString(" |");
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_EXT_CTRL && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(15);
} else {
SEQ_LCD_PrintStringPadded((char *)SEQ_MIDI_IN_ExtCtrlStr(selected_ext_ctrl), 15);
}
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_EXT_VALUE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(10);
} else {
SEQ_LCD_PrintSpaces(1);
if( selected_ext_ctrl == SEQ_MIDI_IN_EXT_CTRL_NRPN_ENABLED ) {
SEQ_LCD_PrintStringPadded(seq_midi_in_ext_ctrl_asg[selected_ext_ctrl] ? "enabled" : "disabled", 9);
} else if( selected_ext_ctrl == SEQ_MIDI_IN_EXT_CTRL_PC_MODE ) {
SEQ_LCD_PrintStringPadded((char *)SEQ_MIDI_IN_ExtCtrlPcModeStr(seq_midi_in_ext_ctrl_asg[selected_ext_ctrl]), 9);
} else {
u8 cc = seq_midi_in_ext_ctrl_asg[selected_ext_ctrl];
if( cc >= 0x80 )
SEQ_LCD_PrintString("off");
else
SEQ_LCD_PrintFormattedString("%3d", cc);
SEQ_LCD_PrintSpaces(7);
}
}
} break;
///////////////////////////////////////////////////////////////////////////
case SUBPAGE_MISC: {
//SEQ_LCD_CursorSet(40, 0);
//<<<<<<< .mine
SEQ_LCD_PrintString("BLM_SCALAR ");
SEQ_LCD_PrintString(blm_timeout_ctr ? "connected " : "not found ");
SEQ_LCD_CursorSet(0, 6);
SEQ_LCD_PrintString(" MIDI ");
SEQ_LCD_CursorSet(0, 5);
/*
=======
SEQ_LCD_PrintString("BLM_SCALAR MIDI ");
SEQ_LCD_CursorSet(40, 1);
>>>>>>> .r1826
*/
///////////////////////////////////////////////////////////////////////
SEQ_LCD_PrintString("Port: ");
if( ui_selected_item == ITEM_BLM_SCALAR_PORT && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
if( !seq_blm_port )
SEQ_LCD_PrintString(" off");
else
SEQ_LCD_PrintString(SEQ_MIDI_PORT_InNameGet(SEQ_MIDI_PORT_InIxGet(seq_blm_port)));
}
//<<<<<<< .mine
SEQ_LCD_CursorSet(0, 7);
//=======
SEQ_LCD_PrintString(blm_timeout_ctr ? " (found) " : " ");
// free for new parameters
SEQ_LCD_PrintSpaces(12);
//>>>>>>> .r1826
///////////////////////////////////////////////////////////////////////
SEQ_LCD_PrintString("Monitor ");
} break;
}
return 0; // no error
}
/////////////////////////////////////////////////////////////////////////////
// Local exit function
/////////////////////////////////////////////////////////////////////////////
static s32 EXIT_Handler(void)
{
s32 status = 0;
if( store_file_required ) {
// write config files
MUTEX_SDCARD_TAKE;
if( (status=SEQ_FILE_C_Write(seq_file_session_name)) < 0 )
SEQ_UI_SDCardErrMsg(2000, status);
MUTEX_SDCARD_GIVE;
MUTEX_SDCARD_TAKE;
if( (status=SEQ_FILE_GC_Write()) < 0 )
SEQ_UI_SDCardErrMsg(2000, status);
MUTEX_SDCARD_GIVE;
}
return status;
}
/////////////////////////////////////////////////////////////////////////////
// Local Display Handler function
// IN: <high_prio>: if set, a high-priority LCD update is requested
/////////////////////////////////////////////////////////////////////////////
static s32 LCD_Handler(u8 high_prio)
{
// layout:
// 0000000000111111111122222222223333333333 0000000000111111111122222222223333333333
// 0123456789012345678901234567890123456789 0123456789012345678901234567890123456789
// <--------------------------------------> <-------------------------------------->
// No Patterns available as long as the Session hasn't been created!
// Please press EXIT and create a new Session!
// Main Page
// 0000000000111111111122222222223333333333 0000000000111111111122222222223333333333
// 0123456789012345678901234567890123456789 0123456789012345678901234567890123456789
// <--------------------------------------> <-------------------------------------->
// A1: Breakbeats 2 16.16 A4: Breakbeat full 10:10:10
// ____ ____ ____ ____ T01: Track Name x__x __x_ ____ ____ 126 BPM
// Remix Page
// 0000000000111111111122222222223333333333 0000000000111111111122222222223333333333
// 0123456789012345678901234567890123456789 0123456789012345678901234567890123456789
// <--------------------------------------> <-------------------------------------->
// 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
// MIX .... UMIX .... UMIX .... .... MIX .... .... .... .... .... .... .... ....
// In preview_mode we can state tracks to Mix state only(on/off), on normal mode
// we can state track do DMix state only(on/off)
// Options Page
// 0000000000111111111122222222223333333333 0000000000111111111122222222223333333333
// 0123456789012345678901234567890123456789 0123456789012345678901234567890123456789
// <--------------------------------------> <-------------------------------------->
// A1: Breakbeats 2 Auto save Auto rset Abtn. Api
// Save Name Copy Paste Trk Delay Off On On
// Edit Name Page
// 0000000000111111111122222222223333333333 0000000000111111111122222222223333333333
// 0123456789012345678901234567890123456789 0123456789012345678901234567890123456789
// <--------------------------------------> <-------------------------------------->
// A1: <xxxxxxxxxxxxxxxxxxxx>
// .,!1 ABC2 DEF3 GHI4 JKL5 MNO6 PQRS7 TUV8 WXYZ9 -_ 0 Char <> Del Ins OK
// Track Delay Page
// 0000000000111111111122222222223333333333 0000000000111111111122222222223333333333
// 0123456789012345678901234567890123456789 0123456789012345678901234567890123456789
// <--------------------------------------> <-------------------------------------->
// 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
// -10 +230 -45 -22 +23 -43 +221 -32 -210 +230 -45 -322 +323 -43 +221 -32
// for this we could use t->bpm_tick_delay, but we need a way to saving
// this values inside the track pattern
if( SEQ_FILE_FormattingRequired() ) {
if( high_prio )
return 0;
MIOS32_LCD_CursorSet(0, 0);
MIOS32_LCD_PrintString(" No Patterns available ");
MIOS32_LCD_CursorSet(0, 1);
MIOS32_LCD_PrintString("as long as theSession ");
MIOS32_LCD_CursorSet(0, 2);
MIOS32_LCD_PrintString("hasn't been created!");
MIOS32_LCD_CursorSet(0, 3);
MIOS32_LCD_PrintString("Please press EXIT and");
MIOS32_LCD_CursorSet(0, 4);
MIOS32_LCD_PrintString("create a new Session! ");
MIOS32_LCD_CursorSet(0, 5);
SEQ_LCD_PrintSpaces(21);
MIOS32_LCD_CursorSet(0, 6);
SEQ_LCD_PrintSpaces(21);
MIOS32_LCD_CursorSet(0, 7);
SEQ_LCD_PrintSpaces(21);
return 0;
}
switch( selected_page ) {
///////////////////////////////////////////////////////////////////////////
// REMIX PAGE
case PAGE_REMIX: {
// Remix Page
// 00000000001111111111222222222233333333330000000000111111111122222222223333333333
// 01234567890123456789012345678901234567890123456789012345678901234567890123456789
// <--------------------------------------><-------------------------------------->
// 1M 2 3M 4 5 6 7 8 9 10 11 12 13 14 15 16
// ... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ....
// <--------------------------------------><-------------------------------------->
// 1D 2 3D 4 5 6 7 8 9 10 11 12 13 14 15 16
// .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ....
if( high_prio ) {
///////////////////////////////////////////////////////////////////////////
// frequently update VU meters and step position counter
u8 track;
//u8 spacer = 0;
MIOS32_LCD_CursorSet(0, 1);
seq_core_trk_t *t = &seq_core_trk[0];
for(track=0; track<16; ++t, ++track) {
//if( !(track % 4) && (track!=0) )
// spacer++;
//MIOS32_LCD_CursorSet(track+spacer, 1);
switch( track ) {
case 0:
MIOS32_LCD_CursorSet(0, 1);
break;
case 4:
MIOS32_LCD_CursorSet(0, 3);
break;
case 8:
MIOS32_LCD_CursorSet(0, 5);
break;
case 12:
MIOS32_LCD_CursorSet(0, 7);
break;
}
//SEQ_LCD_PrintVBar(t->vu_meter >> 4);
SEQ_LCD_PrintHBar(t->vu_meter >> 3);
}
} else { // not high_prio
u8 track;
MIOS32_LCD_CursorSet(0, 0);
SEQ_LCD_PrintSpaces(1);
for(track=0; track<16; ++track) {
switch( track ) {
case 0:
MIOS32_LCD_CursorSet(1, 0);
break;
case 4:
MIOS32_LCD_CursorSet(0, 2);
break;
case 8:
MIOS32_LCD_CursorSet(0, 4);
break;
case 12:
MIOS32_LCD_CursorSet(0, 6);
break;
}
// print the mixed state info
if( seq_pattern_remix_map & (1 << track) ) {
MIOS32_LCD_PrintFormattedString("%dM", track+1);
if (track < 9) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintSpaces(2);
}
// print the demixed state info
} else if ( ( seq_pattern_remix_map ^ seq_pattern_demix_map ) & (1 << track) ) {
MIOS32_LCD_PrintFormattedString("%dD", track+1);
if (track < 9) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintSpaces(2);
}
}else {
MIOS32_LCD_PrintFormattedString("%d", track+1);
if (track < 9) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintSpaces(3);
}
}
}
SEQ_LCD_PrintSpaces(1);
}
} break;
///////////////////////////////////////////////////////////////////////////
// OPTION PAGE
case PAGE_OPTION: {
// 0000000000111111111122222222223333333333 0000000000111111111122222222223333333333
// 0123456789012345678901234567890123456789 0123456789012345678901234567890123456789
// <--------------------------------------> <-------------------------------------->
// A1: Breakbeats 2 Auto save Abtn. Api
// Save Name Copy Paste Off On
///////////////////////////////////////////////////////////////////////////
// Current Pattern Name
SEQ_LCD_Clear();
MIOS32_LCD_CursorSet(0, 0);
SEQ_LCD_PrintPattern(seq_pattern[0]);
MIOS32_LCD_PrintFormattedString(": %s", seq_pattern_name[0]);
///////////////////////////////////////////////////////////////////////////
// Options Labels Left Side
MIOS32_LCD_CursorSet(0, 1);
MIOS32_LCD_PrintString("Save ");
MIOS32_LCD_PrintString("Name ");
MIOS32_LCD_PrintString("Copy ");
MIOS32_LCD_PrintString("Paste");
//MIOS32_LCD_CursorSet(30, 1);
//MIOS32_LCD_PrintString("Trk Delay ");
///////////////////////////////////////////////////////////////////////////
// Options Labels Right Side
MIOS32_LCD_CursorSet(0, 2);
MIOS32_LCD_PrintString("Auto save ");
//MIOS32_LCD_PrintString("Auto rset ");
MIOS32_LCD_PrintString("Abtn. Api ");
MIOS32_LCD_CursorSet(0, 3);
if (auto_save) {
MIOS32_LCD_PrintString(" On ");
} else {
MIOS32_LCD_PrintString(" Off ");
}
//if (auto_reset) {
// MIOS32_LCD_PrintString(" On ");
//} else {
// MIOS32_LCD_PrintString(" Off ");
//}
if (ableton_api) {
MIOS32_LCD_PrintString(" On ");
} else {
MIOS32_LCD_PrintString(" Off ");
}
} break;
///////////////////////////////////////////////////////////////////////////
// PATTERN NAME EDIT PAGE
case PAGE_NAME_EDIT: {
u8 i;
SEQ_LCD_Clear();
MIOS32_LCD_CursorSet(0, 0);
SEQ_LCD_PrintPattern(seq_pattern[0]);
MIOS32_LCD_PrintString(": ");
for(i=0; i<20; ++i)
MIOS32_LCD_PrintChar(seq_pattern_name[ui_selected_group][i]);
// insert flashing cursor
if( ui_cursor_flash ) {
MIOS32_LCD_CursorSet(3 + ((ui_edit_name_cursor < 5) ? 1 : 2) + ui_edit_name_cursor, 0);
MIOS32_LCD_PrintChar('*');
}
SEQ_UI_KeyPad_LCD_Msg();
MIOS32_LCD_CursorSet(10, 7);
MIOS32_LCD_PrintString("Back");
//return 0;
} break;
///////////////////////////////////////////////////////////////////////////
// TRACK DELAY PAGE
case PAGE_TRK_DELAY: {
// 0000000000111111111122222222223333333333 0000000000111111111122222222223333333333
// 0123456789012345678901234567890123456789 0123456789012345678901234567890123456789
// <--------------------------------------> <-------------------------------------->
// 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
// -10 +230 -45 -22 +23 -43 +221 -32 -210 +230 -45 -322 +323 -43 +221 -32
u8 track;
MIOS32_LCD_CursorSet(0, 2);
for(track=0; track<16; ++track) {
MIOS32_LCD_PrintFormattedString("%d", track);
if (track < 11) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintSpaces(3);
}
}
MIOS32_LCD_CursorSet(1, 2);
for(track=0; track<16; ++track) {
MIOS32_LCD_PrintFormattedString("%d", track);
//MIOS32_LCD_PrintFormattedString("%d", 0);
if (track < 11) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintSpaces(3);
}
}
} break;
///////////////////////////////////////////////////////////////////////////
// MAIN PAGE
case PAGE_MAIN: {
// 0000000000111111111122222222223333333333 0000000000111111111122222222223333333333
// 0123456789012345678901234567890123456789 0123456789012345678901234567890123456789
// <--------------------------------------> <-------------------------------------->
// A1: Breakbeats 2 16.16 A4: Breakbeat full 10:10:10
// ____ ____ ____ ____ T01: Track Name x__x __x_ ____ ____ 126 BPM
//MIOS32_LCD_CursorSet(0, 0);
//SEQ_LCD_PrintSpaces();
if( high_prio ) {
///////////////////////////////////////////////////////////////////////////
// Frequently update VU meters
u8 track;
u8 spacer = 0;
seq_core_trk_t *t = &seq_core_trk[0];
for(track=0; track<16; ++t, ++track) {
if( !(track % 4) && (track!=0) )
spacer++;
MIOS32_LCD_CursorSet(track+spacer, 2);
//if( seq_core_trk_muted & (1 << track) )
// SEQ_LCD_PrintVBar('M');
//else
SEQ_LCD_PrintVBar(t->vu_meter >> 4);
}
if ( remix_mode && preview_mode ) {
spacer = 0;
seq_core_trk_t *t = &seq_core_trk[0];
for(track=0; track<16; ++t, ++track) {
if( !(track % 4) && (track!=0) )
spacer++;
MIOS32_LCD_CursorSet((track+spacer), 6);
if( !( seq_pattern_remix_map & (1 << track) ) )
SEQ_LCD_PrintVBar(t->vu_meter >> 4);
}
}
///////////////////////////////////////////////////////////////////////////
// Print Pattern Relative Sequencer Position
// MIOS32_LCD_CursorSet(28, 0);
// u32 tick = SEQ_BPM_TickGet();
// tick = tick - seq_pattern_start_tick;
// u32 ticks_per_step = SEQ_BPM_PPQN_Get() / 4;
// u32 ticks_per_measure = ticks_per_step * (seq_core_steps_per_measure+1);
// u32 measure = (tick / ticks_per_measure) + 1;
// u32 step = ((tick % ticks_per_measure) / ticks_per_step) + 1;
//u32 microstep = tick % ticks_per_step;
//MIOS32_LCD_PrintFormattedString("%8u.%3d.%3d", measure, step, microstep);
// MIOS32_LCD_PrintFormattedString("%8u.%3d", measure, step);
} else { // not high_prio
/////////////////////////////////////////////////////////////////////////////
// Local encoder callback function
// Should return:
// 1 if value has been changed
// 0 if value hasn't been changed
// -1 if invalid or unsupported encoder
/////////////////////////////////////////////////////////////////////////////
static s32 Encoder_Handler(seq_ui_encoder_t encoder, s32 incrementer)
{
u8 visible_track = SEQ_UI_VisibleTrackGet();
int num_steps = SEQ_TRG_NumStepsGet(visible_track);
int track_length = (int)SEQ_CC_Get(visible_track, SEQ_CC_LENGTH) + 1;
#if 0
// leads to: comparison is always true due to limited range of data type
if( (encoder >= SEQ_UI_ENCODER_GP1 && encoder <= SEQ_UI_ENCODER_GP16) ) {
#else
if( encoder <= SEQ_UI_ENCODER_GP16 ) {
#endif
if( seq_ui_button_state.SELECT_PRESSED ) {
int section;
if( num_steps > 128 )
section = encoder / (track_length / 16);
else if( num_steps > 64 )
section = encoder / ((2 * track_length) / 16);
else
section = encoder / ((4 * track_length) / 16);
// operation should be atomic (change all selected tracks)
u8 track;
seq_core_trk_t *t = &seq_core_trk[0];
MIOS32_IRQ_Disable();
for(track=0; track<SEQ_CORE_NUM_TRACKS; ++track, ++t)
if( ui_selected_tracks & (1 << track) )
t->play_section = section;
MIOS32_IRQ_Enable();
} else {
// won't work if Follow function active!
if( seq_core_state.FOLLOW ) {
// print message and exit
SEQ_UI_Msg((encoder <= SEQ_UI_ENCODER_GP8) ? SEQ_UI_MSG_USER : SEQ_UI_MSG_USER_R, 2000, "\"Follow\" active!", "Please deactivate!");
return 1;
}
}
// select new step view
ui_selected_step_view = (encoder * (num_steps/16)) / 16;
// select step within view
if( !seq_ui_button_state.CHANGE_ALL_STEPS ) { // don't change the selected step if ALL function is active, otherwise the ramp can't be changed over multiple views
ui_selected_step = (ui_selected_step_view << 4) | (ui_selected_step & 0xf);
}
if( seq_hwcfg_button_beh.step_view ) {
// if toggle function active: jump back to previous menu
// this is especially useful for the emulated MBSEQ, where we can only click on a single button
// (stepview gets deactivated when clicking on GP button)
if( seq_ui_button_state.STEP_VIEW ) {
seq_ui_button_state.STEP_VIEW = 0;
SEQ_UI_PageSet(ui_stepview_prev_page);
}
}
return 1; // value changed
} else if( encoder == SEQ_UI_ENCODER_Datawheel ) {
if( SEQ_UI_Var8_Inc(&ui_selected_step_view, 0, (num_steps-1)/16, incrementer) >= 1 ) {
// select step within view
if( !seq_ui_button_state.CHANGE_ALL_STEPS ) { // don't change the selected step if ALL function is active, otherwise the ramp can't be changed over multiple views
ui_selected_step = (ui_selected_step_view << 4) | (ui_selected_step & 0xf);
}
} else {
return 0;
}
}
return -1; // invalid or unsupported encoder
}
/////////////////////////////////////////////////////////////////////////////
// Local button callback function
// Should return:
// 1 if value has been changed
// 0 if value hasn't been changed
// -1 if invalid or unsupported button
/////////////////////////////////////////////////////////////////////////////
static s32 Button_Handler(seq_ui_button_t button, s32 depressed)
{
if( depressed ) return 0; // ignore when button depressed
#if 0
// leads to: comparison is always true due to limited range of data type
if( button >= SEQ_UI_BUTTON_GP1 && button <= SEQ_UI_BUTTON_GP16 ) {
#else
if( button <= SEQ_UI_BUTTON_GP16 ) {
#endif
// -> same handling like for encoders
return Encoder_Handler(button, 0);
}
switch( button ) {
case SEQ_UI_BUTTON_Select:
return 1; // selects section mode, checked via seq_ui_button_state.SELECT_PRESSED
case SEQ_UI_BUTTON_Right:
case SEQ_UI_BUTTON_Up:
if( depressed ) return 0; // ignore when button depressed
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, 1);
case SEQ_UI_BUTTON_Left:
case SEQ_UI_BUTTON_Down:
if( depressed ) return 0; // ignore when button depressed
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, -1);
}
return -1; // invalid or unsupported button
}
/////////////////////////////////////////////////////////////////////////////
// Local Display Handler function
// IN: <high_prio>: if set, a high-priority LCD update is requested
/////////////////////////////////////////////////////////////////////////////
static s32 LCD_Handler(u8 high_prio)
{
// layout:
// 00000000001111111111222222222233333333330000000000111111111122222222223333333333
// 01234567890123456789012345678901234567890123456789012345678901234567890123456789
// <--------------------------------------><-------------------------------------->
// 1 17 33 49
// *... *... *... *... *... *... *... *... *... *... *... *... *... *... *... *...
// 5 character usage in 256 step view (5 chars have to display 16 steps, 8 special chars available,
// due to this limitation, we only display 15 steps (shouldn't really hurt))
// 43210 43210 43210 43210 43210
// * * * * . . . * . . . * . . . (Small charset)
// 5 character usage in 128 step view (5 chars have to display 8 steps):
// 43210 43210 43210 43210 43210
// * * . * * . . . (Medium charset)
// 5 character usage in 64 step view (5 chars have to display 4 steps):
// 43210 43210 43210 43210 43210
// * * * * * (Big charset)
u8 visible_track = SEQ_UI_VisibleTrackGet();
u8 event_mode = SEQ_CC_Get(visible_track, SEQ_CC_MIDI_EVENT_MODE);
int num_steps = SEQ_TRG_NumStepsGet(visible_track);
int steps_per_item = num_steps / 16;
int played_step = SEQ_BPM_IsRunning() ? seq_core_trk[visible_track].step : -1;
int i;
if( !high_prio ) {
SEQ_LCD_CursorSet(0, 0);
for(i=0; i<16; ++i)
if( ((i*steps_per_item) % 16) || ((((i*steps_per_item)/16) == ui_selected_step_view) && ui_cursor_flash) )
SEQ_LCD_PrintSpaces(5);
else
SEQ_LCD_PrintFormattedString("%-3d ", i*steps_per_item+1);
// print flashing *LOOPED* at right corner if loop mode activated to remind that steps will be played differntly
if( (ui_cursor_flash_overrun_ctr & 1) && seq_core_state.LOOP ) {
SEQ_LCD_CursorSet(71, 0);
SEQ_LCD_PrintString(" *LOOPED*");
} else if( (ui_cursor_flash_overrun_ctr & 1) && seq_core_trk[visible_track].play_section > 0 ) {
SEQ_LCD_CursorSet(71, 0);
SEQ_LCD_PrintFormattedString(" *Sect.%c*", 'A'+seq_core_trk[visible_track].play_section);
} else {
if( event_mode == SEQ_EVENT_MODE_Drum ) {
// print drum name at the rightmost side
SEQ_LCD_CursorSet(75, 0);
SEQ_LCD_PrintTrackDrum(visible_track, ui_selected_instrument, (char *)seq_core_trk[visible_track].name);
} else {
// print trigger layer and name at the rightmost side
SEQ_LCD_CursorSet(73, 0);
SEQ_LCD_PrintFormattedString("%c:%s", 'A' + ui_selected_trg_layer, SEQ_TRG_AssignedTypeStr(visible_track, ui_selected_trg_layer));
}
}
}
SEQ_LCD_CursorSet(0, 1);
if( steps_per_item > 8 ) {
SEQ_LCD_InitSpecialChars(SEQ_LCD_CHARSET_DrumSymbolsSmall);
for(i=0; i<16; ++i) {
u16 step = i*steps_per_item;
u8 step8 = step / 8;
u8 layer = (event_mode == SEQ_EVENT_MODE_Drum) ? 0 : ui_selected_trg_layer;
u16 steps = (SEQ_TRG_Get8(visible_track, step8+1, layer, ui_selected_instrument) << 8) |
(SEQ_TRG_Get8(visible_track, step8+0, layer, ui_selected_instrument) << 0);
if( played_step >= step && played_step < (step+16) )
steps ^= (1 << (played_step % 16));
int j;
for(j=0; j<5; ++j) {
SEQ_LCD_PrintChar(steps & 0x7);
steps >>= 3;
}
}
} else if( steps_per_item > 4 ) {
/////////////////////////////////////////////////////////////////////////////
// Local button callback function
// Should return:
// 1 if value has been changed
// 0 if value hasn't been changed
// -1 if invalid or unsupported button
/////////////////////////////////////////////////////////////////////////////
static s32 Button_Handler(seq_ui_button_t button, s32 depressed)
{
if( depressed ) return 0; // ignore when button depressed
#if 0
// leads to: comparison is always true due to limited range of data type
if( button >= SEQ_UI_BUTTON_GP1 && button <= SEQ_UI_BUTTON_GP16 ) {
#else
if( button <= SEQ_UI_BUTTON_GP16 ) {
#endif
// re-use encoder handler - only select UI item, don't increment
return Encoder_Handler((int)button, 0);
}
// remaining buttons:
switch( button ) {
case SEQ_UI_BUTTON_Select:
case SEQ_UI_BUTTON_Right:
if( ++ui_selected_item >= NUM_OF_ITEMS )
ui_selected_item = 0;
return 1; // value always changed
case SEQ_UI_BUTTON_Left:
if( ui_selected_item == 0 )
ui_selected_item = NUM_OF_ITEMS-1;
else
--ui_selected_item;
return 1; // value always changed
case SEQ_UI_BUTTON_Up:
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, 1);
case SEQ_UI_BUTTON_Down:
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, -1);
}
return -1; // invalid or unsupported button
}
/////////////////////////////////////////////////////////////////////////////
// Local Display Handler function
// IN: <high_prio>: if set, a high-priority LCD update is requested
/////////////////////////////////////////////////////////////////////////////
static s32 LCD_Handler(u8 high_prio)
{
if( high_prio )
return 0; // there are no high-priority updates
// layout:
// 00000000001111111111222222222233333333330000000000111111111122222222223333333333
// 01234567890123456789012345678901234567890123456789012345678901234567890123456789
// <--------------------------------------><-------------------------------------->
// Trk. Wave Amp. Phs. Steps Rst OneShot Note Vel. Len. CC ExtraCC# Offs. PPQN
// GxTy Sine 64 0% 16 16 on off off off off 001 64 384
u8 visible_track = SEQ_UI_VisibleTrackGet();
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 0);
SEQ_LCD_PrintString("Trk. Wave Amp. Phs. Steps Rst OneShot Note Vel. Len. CC ExtraCC# Offs. PPQN");
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 1);
if( ui_selected_item == ITEM_GXTY && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintGxTy(ui_selected_group, ui_selected_tracks);
}
SEQ_LCD_PrintSpaces(1);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_WAVEFORM && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
u8 value = SEQ_CC_Get(visible_track, SEQ_CC_LFO_WAVEFORM);
if( value <= 3 ) {
const char waveform_str[4][6] = {
" off ",
"Sine ",
"Tri. ",
"Saw. "
};
SEQ_LCD_PrintString((char *)waveform_str[value]);
} else {
SEQ_LCD_PrintFormattedString(" R%02d ", (value-4+1)*5);
}
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_AMPLITUDE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
int value = (int)SEQ_CC_Get(visible_track, SEQ_CC_LFO_AMPLITUDE) - 128;
SEQ_LCD_PrintFormattedString("%4d ", value);
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_PHASE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(6);
} else {
SEQ_LCD_PrintFormattedString("%3d%% ", SEQ_CC_Get(visible_track, SEQ_CC_LFO_PHASE));
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_STEPS && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
SEQ_LCD_PrintFormattedString("%3d ", (int)SEQ_CC_Get(visible_track, SEQ_CC_LFO_STEPS)+1);
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_STEPS_RST && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintFormattedString("%3d ", (int)SEQ_CC_Get(visible_track, SEQ_CC_LFO_STEPS_RST)+1);
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_ENABLE_ONE_SHOT && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
SEQ_LCD_PrintString((SEQ_CC_Get(visible_track, SEQ_CC_LFO_ENABLE_FLAGS) & (1 << 0)) ? " on " : " off ");
}
SEQ_LCD_PrintSpaces(5);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_ENABLE_NOTE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
SEQ_LCD_PrintString((SEQ_CC_Get(visible_track, SEQ_CC_LFO_ENABLE_FLAGS) & (1 << 1)) ? " on " : " off ");
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_ENABLE_VELOCITY && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
SEQ_LCD_PrintString((SEQ_CC_Get(visible_track, SEQ_CC_LFO_ENABLE_FLAGS) & (1 << 2)) ? " on " : " off ");
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_ENABLE_LENGTH && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
SEQ_LCD_PrintString((SEQ_CC_Get(visible_track, SEQ_CC_LFO_ENABLE_FLAGS) & (1 << 3)) ? " on " : " off ");
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_ENABLE_CC && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
SEQ_LCD_PrintString((SEQ_CC_Get(visible_track, SEQ_CC_LFO_ENABLE_FLAGS) & (1 << 4)) ? " on " : " off ");
}
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_PrintSpaces(5);
if( ui_selected_item == ITEM_CC && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
u8 current_value = SEQ_CC_Get(visible_track, SEQ_CC_LFO_CC);
u8 edit_value = (ui_selected_item == ITEM_CC) ? edit_cc_number : current_value;
if( edit_value )
SEQ_LCD_PrintFormattedString(" %03d", edit_value);
else
SEQ_LCD_PrintString(" ---");
SEQ_LCD_PrintChar((current_value != edit_value) ? '!' : ' ');
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_CC_OFFSET && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
SEQ_LCD_PrintFormattedString(" %3d ", SEQ_CC_Get(visible_track, SEQ_CC_LFO_CC_OFFSET));
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_CC_PPQN && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
u8 value = SEQ_CC_Get(visible_track, SEQ_CC_LFO_CC_PPQN);
int ppqn = 1;
if( value )
ppqn = 3 << (value-1);
SEQ_LCD_PrintFormattedString(" %3d ", ppqn);
}
///////////////////////////////////////////////////////////////////////////
return 0; // no error
}
/////////////////////////////////////////////////////////////////////////////
// Initialisation
/////////////////////////////////////////////////////////////////////////////
s32 SEQ_UI_FX_LFO_Init(u32 mode)
{
// install callback routines
SEQ_UI_InstallButtonCallback(Button_Handler);
SEQ_UI_InstallEncoderCallback(Encoder_Handler);
SEQ_UI_InstallLEDCallback(LED_Handler);
SEQ_UI_InstallLCDCallback(LCD_Handler);
return 0; // no error
}
/////////////////////////////////////////////////////////////////////////////
// Local button callback function
// Should return:
// 1 if value has been changed
// 0 if value hasn't been changed
// -1 if invalid or unsupported button
/////////////////////////////////////////////////////////////////////////////
static s32 Button_Handler(seq_ui_button_t button, s32 depressed)
{
if( depressed ) return 0; // ignore when button depressed
#if 0
// leads to: comparison is always true due to limited range of data type
if( button >= SEQ_UI_BUTTON_GP1 && button <= SEQ_UI_BUTTON_GP16 ) {
#else
if( button <= SEQ_UI_BUTTON_GP16 ) {
#endif
// re-use encoder handler - only select UI item, don't increment, flags will be toggled
return Encoder_Handler((int)button, 0);
}
// remaining buttons:
switch( button ) {
case SEQ_UI_BUTTON_Select:
case SEQ_UI_BUTTON_Right:
if( depressed ) return -1;
if( ++ui_selected_item >= NUM_OF_ITEMS )
ui_selected_item = 0;
return 1; // value always changed
case SEQ_UI_BUTTON_Left:
if( depressed ) return -1;
if( ui_selected_item == 0 )
ui_selected_item = NUM_OF_ITEMS-1;
else
--ui_selected_item;
return 1; // value always changed
case SEQ_UI_BUTTON_Up:
if( depressed ) return -1;
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, 1);
case SEQ_UI_BUTTON_Down:
if( depressed ) return -1;
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, -1);
}
return -1; // invalid or unsupported button
}
/////////////////////////////////////////////////////////////////////////////
// Local Display Handler function
// IN: <high_prio>: if set, a high-priority LCD update is requested
/////////////////////////////////////////////////////////////////////////////
static s32 LCD_Handler(u8 high_prio)
{
if( high_prio )
return 0; // there are no high-priority updates
// layout:
// 00000000001111111111222222222233333333330000000000111111111122222222223333333333
// 01234567890123456789012345678901234567890123456789012345678901234567890123456789
// <--------------------------------------><-------------------------------------->
// CV Curve SlewRate PRng Gate Calibr. Clk Rate Width Module
// 1 V/Oct 0 mS 2 Pos. off 1 24 PPQN 1 mS AOUT_NG
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 0);
SEQ_LCD_PrintString(" CV Curve SlewRate PRng Gate Calibr. Clk Rate Width Module ");
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 1);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_CV && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
SEQ_LCD_PrintFormattedString(" %2d ", selected_cv+1);
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_CURVE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(6);
} else {
SEQ_LCD_PrintString((char *)SEQ_CV_CurveNameGet(selected_cv));
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_SLEWRATE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(9);
} else {
SEQ_LCD_PrintFormattedString(" %3d mS ", SEQ_CV_SlewRateGet(selected_cv));
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_PITCHRANGE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(6);
} else {
SEQ_LCD_PrintFormattedString("%3d ", SEQ_CV_PitchRangeGet(selected_cv));
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_GATE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(6);
} else {
SEQ_LCD_PrintFormattedString(SEQ_CV_GateInversionGet(selected_cv) ? "Neg. " : "Pos. ");
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_CALIBRATION && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(8);
} else {
SEQ_LCD_PrintFormattedString(" %s ", SEQ_CV_CaliNameGet());
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_CLK_SEL && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintFormattedString("%3d ", selected_clkout + 1);
}
SEQ_LCD_PrintSpaces(2);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_CLK_PPQN && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(9);
} else {
u16 divider = SEQ_CV_ClkDividerGet(selected_clkout);
if( !divider ) {
SEQ_LCD_PrintFormattedString("StartStop", 384 / divider);
} else {
SEQ_LCD_PrintFormattedString("%3d PPQN ", 384 / divider);
}
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_CLK_WIDTH && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(6);
} else {
SEQ_LCD_PrintFormattedString("%3d mS", SEQ_CV_ClkPulseWidthGet(selected_clkout));
}
SEQ_LCD_PrintSpaces(12);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_MODULE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(8);
} else {
SEQ_LCD_PrintString((char *)SEQ_CV_IfNameGet(SEQ_CV_IfGet()));
}
return 0; // no error
}
/////////////////////////////////////////////////////////////////////////////
// Local exit function
/////////////////////////////////////////////////////////////////////////////
static s32 EXIT_Handler(void)
{
s32 status = 0;
// ensure that calibration mode disabled
SEQ_CV_CaliModeSet(selected_cv, AOUT_CALI_MODE_OFF);
if( store_file_required ) {
// write config file
MUTEX_SDCARD_TAKE;
if( (status=SEQ_FILE_GC_Write()) < 0 )
SEQ_UI_SDCardErrMsg(2000, status);
MUTEX_SDCARD_GIVE;
store_file_required = 0;
}
return status;
}
/////////////////////////////////////////////////////////////////////////////
// Local button callback function
// Should return:
// 1 if value has been changed
// 0 if value hasn't been changed
// -1 if invalid or unsupported button
/////////////////////////////////////////////////////////////////////////////
static s32 Button_Handler(seq_ui_button_t button, s32 depressed)
{
if( depressed ) return 0; // ignore when button depressed
#if 0
// leads to: comparison is always true due to limited range of data type
if( button >= SEQ_UI_BUTTON_GP1 && button <= SEQ_UI_BUTTON_GP16 ) {
#else
if( button <= SEQ_UI_BUTTON_GP16 ) {
#endif
// re-use encoder handler - only select UI item, don't increment
return Encoder_Handler((int)button, 0);
}
// remaining buttons:
switch( button ) {
case SEQ_UI_BUTTON_Select:
case SEQ_UI_BUTTON_Right:
if( ++ui_selected_item >= NUM_OF_ITEMS )
ui_selected_item = 0;
return 1; // value always changed
case SEQ_UI_BUTTON_Left:
if( ui_selected_item == 0 )
ui_selected_item = NUM_OF_ITEMS-1;
else
--ui_selected_item;
return 1; // value always changed
case SEQ_UI_BUTTON_Up:
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, 1);
case SEQ_UI_BUTTON_Down:
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, -1);
}
return -1; // invalid or unsupported button
}
/////////////////////////////////////////////////////////////////////////////
// Local Display Handler function
// IN: <high_prio>: if set, a high-priority LCD update is requested
/////////////////////////////////////////////////////////////////////////////
static s32 LCD_Handler(u8 high_prio)
{
if( high_prio )
return 0; // there are no high-priority updates
// layout:
// 00000000001111111111222222222233333333330000000000111111111122222222223333333333
// 01234567890123456789012345678901234567890123456789012345678901234567890123456789
// <--------------------------------------><-------------------------------------->
// Trk. Repeats Delay Vel.Level FB Velocity Note Gatelen. Ticks
// GxTy 3 1/16 75% 120% + 0 100% 100%
u8 visible_track = SEQ_UI_VisibleTrackGet();
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 0);
SEQ_LCD_PrintString("Trk. Repeats Delay Vel.Level FB Velocity Note Gatelen. Ticks ");
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 1);
if( ui_selected_item == ITEM_GXTY && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintGxTy(ui_selected_group, ui_selected_tracks);
}
SEQ_LCD_PrintSpaces(10);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_REPEATS && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(2);
} else {
SEQ_LCD_PrintFormattedString("%2d", SEQ_CC_Get(visible_track, SEQ_CC_ECHO_REPEATS));
}
SEQ_LCD_PrintSpaces(7);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_DELAY && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintString((char *)SEQ_CORE_Echo_GetDelayModeName(SEQ_CC_Get(visible_track, SEQ_CC_ECHO_DELAY)));
}
SEQ_LCD_PrintSpaces(6);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_VELOCITY && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintFormattedString("%3d%%", 5*SEQ_CC_Get(visible_track, SEQ_CC_ECHO_VELOCITY));
}
SEQ_LCD_PrintSpaces(2);
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(40, 1);
SEQ_LCD_PrintSpaces(4);
if( ui_selected_item == ITEM_FB_VELOCITY && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintFormattedString("%3d%%", 5*SEQ_CC_Get(visible_track, SEQ_CC_ECHO_FB_VELOCITY));
}
SEQ_LCD_PrintSpaces(7);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_FB_NOTE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
u8 note_delta = SEQ_CC_Get(visible_track, SEQ_CC_ECHO_FB_NOTE);
if( note_delta < 24 )
SEQ_LCD_PrintFormattedString("-%2d", 24-note_delta);
else if( note_delta < 49 )
SEQ_LCD_PrintFormattedString("+%2d", note_delta-24);
else
SEQ_LCD_PrintString("Rnd");
}
SEQ_LCD_PrintSpaces(5);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_FB_GATELENGTH && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintFormattedString("%3d%%", 5*SEQ_CC_Get(visible_track, SEQ_CC_ECHO_FB_GATELENGTH));
}
SEQ_LCD_PrintSpaces(7);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_FB_TICKS && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintFormattedString("%3d%%", 5*SEQ_CC_Get(visible_track, SEQ_CC_ECHO_FB_TICKS));
}
SEQ_LCD_PrintSpaces(2);
return 0; // no error
}
/////////////////////////////////////////////////////////////////////////////
// Initialisation
/////////////////////////////////////////////////////////////////////////////
s32 SEQ_UI_FX_ECHO_Init(u32 mode)
{
// install callback routines
SEQ_UI_InstallButtonCallback(Button_Handler);
SEQ_UI_InstallEncoderCallback(Encoder_Handler);
SEQ_UI_InstallLEDCallback(LED_Handler);
SEQ_UI_InstallLCDCallback(LCD_Handler);
return 0; // no error
}
/////////////////////////////////////////////////////////////////////////////
// Local Display Handler function
// IN: <high_prio>: if set, a high-priority LCD update is requested
/////////////////////////////////////////////////////////////////////////////
static s32 LCD_Handler(u8 high_prio)
{
if( high_prio )
return 0; // there are no high-priority updates
// layout:
// 00000000001111111111222222222233333333330000000000111111111122222222223333333333
// 01234567890123456789012345678901234567890123456789012345678901234567890123456789
// <--------------------------------------><-------------------------------------->
// Trk. Length Loop QuickSel Quick Selection: Length
// G1T1 256/256 1 Length 4 8 16 24 32 64 128 256
// Trk. Length Loop QuickSel 1 5 9 13 1 1 17 25
// G1T1 256/256 1 Loops 4 8 12 16 16 32 32 32
u8 visible_track = SEQ_UI_VisibleTrackGet();
s32 quicksel_item = QUICKSEL_SearchItem(SEQ_UI_VisibleTrackGet());
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 0);
SEQ_LCD_PrintString("Trk. Length Loop ");
SEQ_LCD_CursorSet(0, 2);
SEQ_LCD_PrintString("QuickSel: ");
SEQ_LCD_CursorSet(0, 3);
SEQ_LCD_PrintSpaces(21);
SEQ_LCD_CursorSet(0, 4);
if( quicksel_mode == QUICKSEL_MODE_LENGTH ) {
//SEQ_LCD_PrintString("Quick Selection: Length ");
SEQ_LCD_PrintSpaces(21);
} else {
int i;
for(i=0; i<8; ++i) {
switch( i ) {
case 0:
SEQ_LCD_CursorSet(0, 4);
break;
case 4:
SEQ_LCD_CursorSet(0, 6);
break;
}
if( quicksel_item == i && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
int loop = (int)ui_quicksel_loop_loop[i] + 1;
PrintLengthOrLoop(loop);
}
}
}
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 1);
if( ui_selected_item == ITEM_GXTY && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(7);
} else {
SEQ_LCD_PrintGxTy(ui_selected_group, ui_selected_tracks);
SEQ_LCD_PrintSpaces(3);
}
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_PrintSpaces(8);
if( ui_selected_item == ITEM_LENGTH && ui_cursor_flash ) {
} else {
SEQ_LCD_CursorSet(7, 1);
u16 num_steps = SEQ_TRG_NumStepsGet(visible_track);
u16 len = SEQ_CC_Get(visible_track, SEQ_CC_LENGTH)+1;
if( len > num_steps )
SEQ_LCD_PrintFormattedString("!!!/%d", num_steps);
else
SEQ_LCD_PrintFormattedString("%d/%d", len, num_steps);
}
// to allow variable string lengths...
SEQ_LCD_CursorSet(15, 1);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_LOOP && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
u16 num_steps = SEQ_TRG_NumStepsGet(visible_track);
u16 loop = SEQ_CC_Get(visible_track, SEQ_CC_LOOP)+1;
if( loop > num_steps )
SEQ_LCD_PrintString("!!! ");
else
SEQ_LCD_PrintFormattedString("%3d ", loop);
}
///////////////////////////////////////////////////////////////////////////
//SEQ_LCD_PrintSpaces(14);
SEQ_LCD_CursorSet(11, 2);
// free for sale
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_QUICKSEL_MODE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(7);
} else {
if( quicksel_mode == QUICKSEL_MODE_LENGTH ) {
SEQ_LCD_PrintString("Length ");
} else {
SEQ_LCD_PrintString("Loops ");
}
}
///////////////////////////////////////////////////////////////////////////
int i;
for(i=0; i<8; ++i) {
switch( i ) {
case 0:
SEQ_LCD_CursorSet(0, 5);
break;
case 4:
SEQ_LCD_CursorSet(0, 7);
break;
}
if( quicksel_item == i && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
int length = (int)((quicksel_mode == QUICKSEL_MODE_LENGTH) ? ui_quicksel_length[i] : ui_quicksel_loop_length[i]) + 1;
if( length > SEQ_TRG_NumStepsGet(visible_track) )
SEQ_LCD_PrintString(" --- ");
else {
PrintLengthOrLoop(length);
}
}
}
return 0; // no error
}
/////////////////////////////////////////////////////////////////////////////
// Local button callback function
// Should return:
// 1 if value has been changed
// 0 if value hasn't been changed
// -1 if invalid or unsupported button
/////////////////////////////////////////////////////////////////////////////
static s32 Button_Handler(seq_ui_button_t button, s32 depressed)
{
if( depressed ) return 0; // ignore when button depressed
u8 visible_track = SEQ_UI_VisibleTrackGet();
#if 0
// leads to: comparison is always true due to limited range of data type
if( button >= SEQ_UI_BUTTON_GP1 && button <= SEQ_UI_BUTTON_GP16 ) {
#else
if( button <= SEQ_UI_BUTTON_GP15 ) {
#endif
// re-use encoder handler - only select UI item, don't increment
return Encoder_Handler((int)button, 0);
}
// remaining buttons:
switch( button ) {
case SEQ_UI_BUTTON_GP16: {
if( SEQ_GROOVE_Clear(SEQ_CC_Get(visible_track, SEQ_CC_GROOVE_STYLE)) < 0 )
SEQ_UI_Msg(SEQ_UI_MSG_USER, 1000, "Preset", "not editable!");
else
SEQ_UI_Msg(SEQ_UI_MSG_USER, 1000, "Groove", "cleared!");
} break;
case SEQ_UI_BUTTON_Select:
case SEQ_UI_BUTTON_Right:
if( ++ui_selected_item >= NUM_OF_ITEMS )
ui_selected_item = 0;
return 1; // value always changed
case SEQ_UI_BUTTON_Left:
if( ui_selected_item == 0 )
ui_selected_item = NUM_OF_ITEMS-1;
else
--ui_selected_item;
return 1; // value always changed
case SEQ_UI_BUTTON_Up:
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, 1);
case SEQ_UI_BUTTON_Down:
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, -1);
}
return -1; // invalid or unsupported button
}
/////////////////////////////////////////////////////////////////////////////
// Local Display Handler function
// IN: <high_prio>: if set, a high-priority LCD update is requested
/////////////////////////////////////////////////////////////////////////////
static s32 LCD_Handler(u8 high_prio)
{
if( high_prio )
return 0; // there are no high-priority updates
// layout:
// 00000000001111111111222222222233333333330000000000111111111122222222223333333333
// 01234567890123456789012345678901234567890123456789012345678901234567890123456789
// <--------------------------------------><-------------------------------------->
// Trk. Groove Style Intensity Change forStep Dly. Len. Vel. NumSteps Clr
// G1T1 Inv. Shuffle 15 all Tracks 1 0 0 0 Preset not editable!
u8 visible_track = SEQ_UI_VisibleTrackGet();
u8 selected_groove = SEQ_CC_Get(visible_track, SEQ_CC_GROOVE_STYLE);
seq_groove_entry_t *g;
if( selected_groove >= SEQ_GROOVE_NUM_PRESETS )
g = (seq_groove_entry_t *)&seq_groove_templates[selected_groove-SEQ_GROOVE_NUM_PRESETS];
else
g = (seq_groove_entry_t *)&seq_groove_presets[selected_groove];
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 0);
SEQ_LCD_PrintString("Trk. Groove Style Intensity ");
if( ui_selected_item == ITEM_GROOVE_VALUE_GLB && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(10);
} else {
SEQ_LCD_PrintString("Change for");
}
SEQ_LCD_PrintString("Step Dly. Len. Vel. NumSteps Clr ");
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 1);
if( ui_selected_item == ITEM_GXTY && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintGxTy(ui_selected_group, ui_selected_tracks);
}
SEQ_LCD_PrintSpaces(2);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_GROOVE_STYLE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(12);
} else {
SEQ_LCD_PrintString(SEQ_GROOVE_NameGet(selected_groove));
}
SEQ_LCD_PrintSpaces(5);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_GROOVE_VALUE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintFormattedString("%3d", SEQ_CC_Get(visible_track, SEQ_CC_GROOVE_VALUE));
}
SEQ_LCD_PrintSpaces(4);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_GROOVE_VALUE_GLB && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(10);
} else {
SEQ_LCD_PrintString("all Tracks");
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_GROOVE_STEP && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintFormattedString(" %2d ", edit_step+1);
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_GROOVE_DELAY && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
int value = g->add_step_delay[edit_step];
if( value <= -128 )
SEQ_LCD_PrintString("VNEG ");
else if( value >= 127 )
SEQ_LCD_PrintString("VPOS ");
else
SEQ_LCD_PrintFormattedString("%4d ", value);
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_GROOVE_LENGTH && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
int value = g->add_step_length[edit_step];
if( value <= -128 )
SEQ_LCD_PrintString("VNEG ");
else if( value >= 127 )
SEQ_LCD_PrintString("VPOS ");
else
SEQ_LCD_PrintFormattedString("%4d ", value);
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_GROOVE_VELOCITY && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
int value = g->add_step_velocity[edit_step];
if( value <= -128 )
SEQ_LCD_PrintString("VNEG ");
else if( value >= 127 )
SEQ_LCD_PrintString("VPOS ");
else
SEQ_LCD_PrintFormattedString("%4d ", value);
}
///////////////////////////////////////////////////////////////////////////
if( selected_groove >= SEQ_GROOVE_NUM_PRESETS ) {
if( ui_selected_item == ITEM_GROOVE_NUM_STEPS && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(6);
} else {
SEQ_LCD_PrintFormattedString(" %2d ", g->num_steps);
}
SEQ_LCD_PrintSpaces(15);
} else {
if( ui_cursor_flash && ui_selected_item >= ITEM_GROOVE_LENGTH && ui_selected_item <= ITEM_GROOVE_DELAY )
SEQ_LCD_PrintSpaces(21);
else
SEQ_LCD_PrintString(" Preset not editable!");
}
return 0; // no error
}
/////////////////////////////////////////////////////////////////////////////
// Local exit function
/////////////////////////////////////////////////////////////////////////////
static s32 EXIT_Handler(void)
{
s32 status = 0;
if( ui_store_file_required ) {
// write config file
MUTEX_SDCARD_TAKE;
if( (status=SEQ_FILE_G_Write(seq_file_session_name)) < 0 )
SEQ_UI_SDCardErrMsg(2000, status);
MUTEX_SDCARD_GIVE;
ui_store_file_required = 0;
}
return status;
}
/////////////////////////////////////////////////////////////////////////////
// Local Display Handler function
// IN: <high_prio>: if set, a high-priority LCD update is requested
/////////////////////////////////////////////////////////////////////////////
static s32 LCD_Handler(u8 high_prio)
{
if( high_prio )
return 0; // there are no high-priority updates
// layout:
// 00000000001111111111222222222233333333330000000000111111111122222222223333333333
// 01234567890123456789012345678901234567890123456789012345678901234567890123456789
// <--------------------------------------><-------------------------------------->
// Select MIDI Device with GP Button: 2 Devices found under /SYSEX
// MBSID MBFM ....
// Select MIDI Device with GP Button: 10 Devices found under /SYSEX
// xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx>
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 0);
SEQ_LCD_PrintSpaces(80);
SEQ_LCD_CursorSet(0, 0);
if( dir_num_items < 0 ) {
if( dir_name[0] != 0 && dir_num_items == FILE_ERR_NO_DIR )
SEQ_LCD_PrintFormattedString("/SYSEX/%s directory not found on SD Card!", dir_name);
else if( dir_num_items == FILE_ERR_NO_DIR )
SEQ_LCD_PrintString("/SYSEX directory not found on SD Card!");
else
SEQ_LCD_PrintFormattedString("SD Card Access Error: %d", dir_num_items);
} else if( dir_num_items == 0 ) {
if( dir_name[0] != 0 )
SEQ_LCD_PrintFormattedString("No .SYX files found under /SYSEX/%s!", dir_name);
else
SEQ_LCD_PrintString("No subdirectories found in /SYSEX directory on SD Card!");
} else {
if( dir_name[0] != 0 ) {
SEQ_LCD_PrintString("Select .SYX file with GP Button:");
SEQ_LCD_CursorSet(40, 0);
SEQ_LCD_PrintFormattedString("%d files found under /SYSEX/%s", dir_num_items, dir_name);
} else {
SEQ_LCD_PrintString("Select MIDI Device with GP Button:");
SEQ_LCD_CursorSet(40, 0);
SEQ_LCD_PrintFormattedString("%d Devices found under /SYSEX", dir_num_items);
}
}
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 1);
if( !dir_name[0] ) {
SEQ_LCD_PrintList((char *)ui_global_dir_list, LIST_ENTRY_WIDTH, dir_num_items, NUM_LIST_DISPLAYED_ITEMS, ui_selected_item, dir_view_offset);
} else {
SEQ_LCD_PrintList((char *)ui_global_dir_list, LIST_ENTRY_WIDTH, dir_num_items, NUM_LIST_DISPLAYED_ITEMS-1, ui_selected_item, dir_view_offset);
SEQ_LCD_PrintChar(' ');
SEQ_LCD_PrintString((char *)SEQ_MIDI_PORT_OutNameGet(SEQ_MIDI_PORT_OutIxGet(sysex_port)));
SEQ_LCD_PrintString(" EXIT");
}
return 0; // no error
}
/////////////////////////////////////////////////////////////////////////////
// Local button callback function
// Should return:
// 1 if value has been changed
// 0 if value hasn't been changed
// -1 if invalid or unsupported button
/////////////////////////////////////////////////////////////////////////////
static s32 Button_Handler(seq_ui_button_t button, s32 depressed)
{
if( depressed ) return 0; // ignore when button depressed
#if 0
// leads to: comparison is always true due to limited range of data type
if( button >= SEQ_UI_BUTTON_GP1 && button <= SEQ_UI_BUTTON_GP16 ) {
#else
if( button <= SEQ_UI_BUTTON_GP16 ) {
#endif
// re-use encoder handler - only select UI item, don't increment, flags will be toggled
return Encoder_Handler((int)button, 0);
}
// remaining buttons:
switch( button ) {
case SEQ_UI_BUTTON_Select:
case SEQ_UI_BUTTON_Right:
if( depressed ) return -1;
if( ++ui_selected_item >= NUM_OF_ITEMS )
ui_selected_item = 0;
return 1; // value always changed
case SEQ_UI_BUTTON_Left:
if( depressed ) return -1;
if( ui_selected_item == 0 )
ui_selected_item = NUM_OF_ITEMS-1;
else
--ui_selected_item;
return 1; // value always changed
case SEQ_UI_BUTTON_Up:
if( depressed ) return -1;
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, 1);
case SEQ_UI_BUTTON_Down:
if( depressed ) return -1;
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, -1);
}
return -1; // invalid or unsupported button
}
/////////////////////////////////////////////////////////////////////////////
// Local Display Handler function
// IN: <high_prio>: if set, a high-priority LCD update is requested
/////////////////////////////////////////////////////////////////////////////
static s32 LCD_Handler(u8 high_prio)
{
if( high_prio )
return 0; // there are no high-priority updates
// layout:
// 00000000001111111111222222222233333333330000000000111111111122222222223333333333
// 01234567890123456789012345678901234567890123456789012345678901234567890123456789
// <--------------------------------------><-------------------------------------->
// Control Root Selected Scale
// Global Keyb 50:Hungarian Gypsy
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 0);
SEQ_LCD_PrintString(" Control Root Selected Scale ");
SEQ_LCD_PrintSpaces(40);
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 1);
SEQ_LCD_PrintSpaces(1);
if( ui_selected_item == ITEM_SCALE_CTRL && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(8);
} else {
if( seq_core_global_scale_ctrl )
SEQ_LCD_PrintFormattedString("Group G%d", seq_core_global_scale_ctrl);
else
SEQ_LCD_PrintString("Global ");
}
SEQ_LCD_PrintSpaces(1);
///////////////////////////////////////////////////////////////////////////
// determine the selected scale and root note selection depending on
// global/group specific settings
u8 scale, root_selection, root;
SEQ_CORE_FTS_GetScaleAndRoot(&scale, &root_selection, &root);
if( ui_selected_item == ITEM_SCALE_ROOT && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
const char root_str[13][5] = {
"Keyb", " C ", " C# ", " D ", " D# ", " E ", " F ", " F# ", " G ", " G# ", " A ", " A# ", " B "
};
SEQ_LCD_PrintString((char *)root_str[root_selection]);
}
SEQ_LCD_PrintSpaces(2);
if( ui_selected_item == ITEM_SCALE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(24);
} else {
SEQ_LCD_PrintFormattedString("%3d:", scale);
SEQ_LCD_PrintString(SEQ_SCALE_NameGet(scale));
}
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_PrintSpaces(40);
return 0; // no error
}
/////////////////////////////////////////////////////////////////////////////
// Local exit function
/////////////////////////////////////////////////////////////////////////////
static s32 EXIT_Handler(void)
{
s32 status = 0;
if( ui_store_file_required ) {
// write config file
MUTEX_SDCARD_TAKE;
if( (status=SEQ_FILE_C_Write(seq_file_session_name)) < 0 )
SEQ_UI_SDCardErrMsg(2000, status);
MUTEX_SDCARD_GIVE;
ui_store_file_required = 0;
}
return status;
}
/////////////////////////////////////////////////////////////////////////////
// Local Display Handler function
// IN: <high_prio>: if set, a high-priority LCD update is requested
/////////////////////////////////////////////////////////////////////////////
static s32 LCD_Handler(u8 high_prio)
{
if( high_prio ) {
SEQ_LCD_CursorSet(32, 0);
mios32_sys_time_t t = MIOS32_SYS_TimeGet();
int hours = (t.seconds / 3600) % 24;
int minutes = (t.seconds % 3600) / 60;
int seconds = (t.seconds % 3600) % 60;
SEQ_LCD_PrintFormattedString("%02d:%02d:%02d", hours, minutes, seconds);
return 0;
}
// layout:
// 00000000001111111111222222222233333333330000000000111111111122222222223333333333
// 01234567890123456789012345678901234567890123456789012345678901234567890123456789
// <--------------------------------------><-------------------------------------->
// About this MIDIbox: 00:00:00Stopwatch: 100/ 300 uS CPU Load: 40%
// System Globals Tracks TrackInfo>MIDI Scheduler: Alloc 0/ 0 Drops: 0
// Select MIDI Device with GP Button: 10 Devices found under /sysex
// xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx>
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 0);
SEQ_LCD_PrintString("About this MIDIbox: ");
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 1);
SEQ_LCD_PrintList((char *)ui_global_dir_list, LIST_ENTRY_WIDTH, NUM_LIST_ITEMS, NUM_LIST_DISPLAYED_ITEMS, ui_selected_item, list_view_offset);
///////////////////////////////////////////////////////////////////////////
switch( ui_selected_item + list_view_offset ) {
case LIST_ITEM_SYSTEM: {
u32 stopwatch_value_max = SEQ_STATISTICS_StopwatchGetValueMax();
u32 stopwatch_value = SEQ_STATISTICS_StopwatchGetValue();
SEQ_LCD_CursorSet(40, 0);
if( stopwatch_value_max == 0xffffffff ) {
SEQ_LCD_PrintFormattedString("Stopwatch: Overrun! ");
} else if( !stopwatch_value_max ) {
SEQ_LCD_PrintFormattedString("Stopwatch: no result yet");
} else {
SEQ_LCD_PrintFormattedString("Stopwatch: %4d/%4d uS ", stopwatch_value, stopwatch_value_max);
}
SEQ_LCD_PrintSpaces(3);
SEQ_LCD_PrintFormattedString("CPU Load: %02d%%", SEQ_STATISTICS_CurrentCPULoad());
SEQ_LCD_CursorSet(40, 1);
if( seq_midi_out_allocated > 1000 || seq_midi_out_max_allocated > 1000 || seq_midi_out_dropouts > 1000 ) {
SEQ_LCD_PrintFormattedString("MIDI Scheduler: Alloc %4d/%4d Dr: %4d",
seq_midi_out_allocated, seq_midi_out_max_allocated, seq_midi_out_dropouts);
} else {
SEQ_LCD_PrintFormattedString("MIDI Scheduler: Alloc %3d/%3d Drops: %3d",
seq_midi_out_allocated, seq_midi_out_max_allocated, seq_midi_out_dropouts);
}
} break;
default:
SEQ_LCD_CursorSet(40, 0);
// <---------------------------------------->
SEQ_LCD_PrintString("Press SELECT to send Informations ");
SEQ_LCD_CursorSet(40, 1);
SEQ_LCD_PrintString("to MIOS Terminal ");
}
return 0; // no error
}
/////////////////////////////////////////////////////////////////////////////
// Local encoder callback function
// Should return:
// 1 if value has been changed
// 0 if value hasn't been changed
// -1 if invalid or unsupported encoder
/////////////////////////////////////////////////////////////////////////////
static s32 Encoder_Handler(seq_ui_encoder_t encoder, s32 incrementer)
{
// ensure that original screen will be print immediately
ui_hold_msg_ctr = 0;
#if 0
// leads to: comparison is always true due to limited range of data type
if( (encoder >= SEQ_UI_ENCODER_GP1 && encoder <= SEQ_UI_ENCODER_GP16) ) {
#else
if( encoder <= SEQ_UI_ENCODER_GP16 ) {
#endif
// select step within view
ui_selected_step = (ui_selected_step_view << 4) | (u8)encoder;
// show edit page for 2 seconds
ui_hold_msg_ctr = 2000;
// forward manual trigger to SEQ_CORE
SEQ_CORE_ManualTrigger(ui_selected_step);
return 1; // value changed
}
return -1; // invalid or unsupported encoder
}
/////////////////////////////////////////////////////////////////////////////
// Local button callback function
// Should return:
// 1 if value has been changed
// 0 if value hasn't been changed
// -1 if invalid or unsupported button
/////////////////////////////////////////////////////////////////////////////
static s32 Button_Handler(seq_ui_button_t button, s32 depressed)
{
if( depressed ) return 0; // ignore when button depressed
// ensure that original screen will be print immediately
ui_hold_msg_ctr = 0;
#if 0
// leads to: comparison is always true due to limited range of data type
if( button >= SEQ_UI_BUTTON_GP1 && button <= SEQ_UI_BUTTON_GP16 ) {
#else
if( button <= SEQ_UI_BUTTON_GP16 ) {
#endif
// -> same handling like for encoders
return Encoder_Handler(button, 0);
}
switch( button ) {
case SEQ_UI_BUTTON_Select: {
// Request synch to measure for all selected tracks
SEQ_CORE_ManualSynchToMeasure();
return 1;
} break;
case SEQ_UI_BUTTON_Right:
case SEQ_UI_BUTTON_Up:
if( depressed ) return 0; // ignore when button depressed
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, 1);
case SEQ_UI_BUTTON_Left:
case SEQ_UI_BUTTON_Down:
if( depressed ) return 0; // ignore when button depressed
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, -1);
}
return -1; // invalid or unsupported button
}
/////////////////////////////////////////////////////////////////////////////
// Local Display Handler function
// IN: <high_prio>: if set, a high-priority LCD update is requested
/////////////////////////////////////////////////////////////////////////////
static s32 LCD_Handler(u8 high_prio)
{
// branch to edit page if requested
if( ui_hold_msg_ctr )
return SEQ_UI_EDIT_LCD_Handler(high_prio, SEQ_UI_EDIT_MODE_MANUAL);
// layout:
// 00000000001111111111222222222233333333330000000000111111111122222222223333333333
// 01234567890123456789012345678901234567890123456789012345678901234567890123456789
// <--------------------------------------><-------------------------------------->
// Selected Tracks: 1234 1234 1234 1234 Press SELECT to Synch to Measure!
// lower line: print step 1..16/17..32/...
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 0);
SEQ_LCD_PrintString(" Selected Tracks: ");
u8 track;
for(track=0; track<16; ++track) {
if( seq_core_trk[track].state.SYNC_MEASURE )
SEQ_LCD_PrintChar('S');
else if( SEQ_UI_IsSelectedTrack(track) )
SEQ_LCD_PrintChar('*');
else
SEQ_LCD_PrintChar('1' + (track&3));
if( (track&3) == 3 )
SEQ_LCD_PrintChar(' ');
}
SEQ_LCD_PrintSpaces(1);
SEQ_LCD_PrintString(" Press SELECT to Synch to Measure! ");
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 1);
u8 step;
for(step=0; step<16; ++step)
SEQ_LCD_PrintFormattedString(" %2d ", 16*ui_selected_step_view + step + 1);
return 0; // no error
}
/////////////////////////////////////////////////////////////////////////////
// Initialisation
/////////////////////////////////////////////////////////////////////////////
s32 SEQ_UI_MANUAL_Init(u32 mode)
{
// install callback routines
SEQ_UI_InstallButtonCallback(Button_Handler);
SEQ_UI_InstallEncoderCallback(Encoder_Handler);
SEQ_UI_InstallLEDCallback(LED_Handler);
SEQ_UI_InstallLCDCallback(LCD_Handler);
return 0; // no error
}
/////////////////////////////////////////////////////////////////////////////
// Local Display Handler function
// IN: <high_prio>: if set, a high-priority LCD update is requested
/////////////////////////////////////////////////////////////////////////////
static s32 LCD_Handler(u8 high_prio)
{
if( high_prio )
return 0; // there are no high-priority updates
// layout:
// 00000000001111111111222222222233333333330000000000111111111122222222223333333333
// 01234567890123456789012345678901234567890123456789012345678901234567890123456789
// <--------------------------------------><-------------------------------------->
// Trk. off Transpose Bus Hold Sort Restart ForceScale Sustain
// G1T1 >Normal< Arpeggiator 1 on on on on on
u8 visible_track = SEQ_UI_VisibleTrackGet();
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 0);
SEQ_LCD_PrintString("Trk.");
SEQ_LCD_CursorSet(0, 1);
if( ui_selected_item == ITEM_GXTY && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(9);
} else {
SEQ_LCD_PrintGxTy(ui_selected_group, ui_selected_tracks);
SEQ_LCD_PrintSpaces(5);
}
///////////////////////////////////////////////////////////////////////////
const char mode_names[7][14] = {
">off< ",
">Normal< ",
">Transpose< ",
">Arpeggiator<"
};
int i;
int selected_mode = SEQ_CC_Get(visible_track, SEQ_CC_MODE);
for(i=0; i<4; ++i) {
u8 x = 4 + 5*i;
SEQ_LCD_CursorSet(x, i%2);
// print unmodified name if item selected
// replace '>' and '<' by space if item not selected
// flash item (print only '>'/'<' and spaces) if cursor position == 1 and flash flag set by timer
int j;
for(j=0; j<13; ++j) {
u8 c = mode_names[i][j];
if( ++x > 35 ) // don't print more than 35 characters per line
break;
if( c == '>' || c == '<' ) {
SEQ_LCD_PrintChar((i == selected_mode) ? c : ' ');
} else {
if( ui_selected_item == ITEM_MODE && i == selected_mode && ui_cursor_flash )
SEQ_LCD_PrintChar(' ');
else
SEQ_LCD_PrintChar(c);
}
}
}
// additional spaces to fill LCD (avoids artefacts on page switches)
SEQ_LCD_CursorSet(25, 0);
SEQ_LCD_PrintSpaces(15);
SEQ_LCD_CursorSet(32, 1);
SEQ_LCD_PrintSpaces(8);
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(35, 0);
SEQ_LCD_PrintString(" Bus Hold Sort Restart ForceScale Sustain ");
SEQ_LCD_CursorSet(35, 1);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_BUS && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintFormattedString(" %d", SEQ_CC_Get(visible_track, SEQ_CC_BUSASG) + 1);
}
SEQ_LCD_PrintSpaces(3);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_HOLD && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintString((SEQ_CC_Get(visible_track, SEQ_CC_MODE_FLAGS) & (1 << 1)) ? "on " : "off");
}
SEQ_LCD_PrintSpaces(2);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_SORT && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintString((SEQ_CC_Get(visible_track, SEQ_CC_MODE_FLAGS) & (1 << 0)) ? "off" : "on "); // SORT is inverted!
}
SEQ_LCD_PrintSpaces(4);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_RESTART && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintString((SEQ_CC_Get(visible_track, SEQ_CC_MODE_FLAGS) & (1 << 2)) ? "on " : "off");
}
SEQ_LCD_PrintSpaces(7);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_FORCE_SCALE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintString((SEQ_CC_Get(visible_track, SEQ_CC_MODE_FLAGS) & (1 << 3)) ? "on " : "off");
}
SEQ_LCD_PrintSpaces(8);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_SUSTAIN && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintString((SEQ_CC_Get(visible_track, SEQ_CC_MODE_FLAGS) & (1 << 4)) ? "on " : "off");
}
SEQ_LCD_PrintSpaces(3);
return 0; // no error
}
/////////////////////////////////////////////////////////////////////////////
// Local Display Handler function
// IN: <high_prio>: if set, a high-priority LCD update is requested
/////////////////////////////////////////////////////////////////////////////
static s32 LCD_Handler(u8 high_prio)
{
u8 visible_track = SEQ_UI_VisibleTrackGet();
if( high_prio )
return 0; // there are no high-priority updates
// layout:
// 00000000001111111111222222222233333333330000000000111111111122222222223333333333
// 01234567890123456789012345678901234567890123456789012345678901234567890123456789
// <--------------------------------------><-------------------------------------->
// Trk. Mute Oct. Vel. FTS Fx Bus Port Chn. Lower/Upper Mode Reset
// G1T1 +0 100 on on 1 IN1 #16 --- --- T&A Stacks
// The selected Bus1 is not configured Bus Port Chn. Lower/Upper Mode Reset
// for Play mode (but for Transposer&Arp.) 1 IN1 #16 --- --- T&A Stacks
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 0);
if( !seq_midi_in_options[selected_bus].MODE_PLAY ) {
SEQ_LCD_PrintFormattedString("The selected Bus%d is not configured ", selected_bus+1);
} else {
SEQ_LCD_PrintString("Trk. Mute Oct. Vel. FTS Fx ");
}
SEQ_LCD_CursorSet(40, 0);
SEQ_LCD_PrintString(" Bus Port Chn. Lower/Upper Mode Reset ");
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 1);
if( !seq_midi_in_options[selected_bus].MODE_PLAY ) {
SEQ_LCD_PrintString("for Play mode (but for Transposer&Arp.) ");
} else {
if( ui_selected_item == ITEM_GXTY && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintGxTy(ui_selected_group, ui_selected_tracks);
}
SEQ_LCD_PrintSpaces(1);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_MUTE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
SEQ_LCD_PrintSpaces(2);
SEQ_LCD_PrintChar((seq_core_trk_muted & (1 << visible_track)) ? '*' : 'o');
SEQ_LCD_PrintSpaces(2);
}
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_OCT_TRANSPOSE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
u8 event_mode = SEQ_CC_Get(visible_track, SEQ_CC_MIDI_EVENT_MODE);
if( event_mode == SEQ_EVENT_MODE_Drum ) {
SEQ_LCD_PrintString("Drum");
} else {
SEQ_LCD_PrintFormattedString(" %c%d ", (seq_live_options.OCT_TRANSPOSE < 0) ? '-' : '+', abs(seq_live_options.OCT_TRANSPOSE));
}
}
SEQ_LCD_PrintSpaces(1);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_LIVE_VELOCITY && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintFormattedString("%3d", seq_live_options.VELOCITY);
}
SEQ_LCD_PrintSpaces(2);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_LIVE_FORCE_SCALE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintString(seq_live_options.FORCE_SCALE ? " on" : "off");
}
SEQ_LCD_PrintSpaces(2);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_LIVE_FX && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintString(seq_live_options.FX ? " on" : "off");
}
SEQ_LCD_PrintSpaces(2 + 10);
}
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_IN_BUS && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
SEQ_LCD_PrintFormattedString(" %d ", selected_bus+1);
}
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_IN_PORT && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
if( seq_midi_in_port[selected_bus] )
SEQ_LCD_PrintString(SEQ_MIDI_PORT_InNameGet(SEQ_MIDI_PORT_InIxGet(seq_midi_in_port[selected_bus])));
else
SEQ_LCD_PrintString(" All");
}
SEQ_LCD_PrintSpaces(1);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_IN_CHN && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
if( seq_midi_in_channel[selected_bus] )
SEQ_LCD_PrintFormattedString("#%2d", seq_midi_in_channel[selected_bus]);
else
SEQ_LCD_PrintString("---");
}
SEQ_LCD_PrintSpaces(3);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_IN_LOWER && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintNote(seq_midi_in_lower[selected_bus]);
}
SEQ_LCD_PrintSpaces(3);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_IN_UPPER && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintNote(seq_midi_in_upper[selected_bus]);
}
SEQ_LCD_PrintSpaces(2);
///////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_IN_MODE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintString(seq_midi_in_options[selected_bus].MODE_PLAY ? "Play" : "T&A ");
}
SEQ_LCD_PrintSpaces(3);
SEQ_LCD_PrintString("Stacks");
return 0; // no error
}
/////////////////////////////////////////////////////////////////////////////
// Local button callback function
// Should return:
// 1 if value has been changed
// 0 if value hasn't been changed
// -1 if invalid or unsupported button
/////////////////////////////////////////////////////////////////////////////
static s32 Button_Handler(seq_ui_button_t button, s32 depressed)
{
if( depressed ) return 0; // ignore when button depressed
// reset tap tempo if any button != GP16 has been pressed
if( button != SEQ_UI_BUTTON_GP16 )
resetTapTempo();
#if 0
// leads to: comparison is always true due to limited range of data type
if( button >= SEQ_UI_BUTTON_GP1 && button <= SEQ_UI_BUTTON_GP16 ) {
#else
if( button <= SEQ_UI_BUTTON_GP16 ) {
#endif
switch( button ) {
case SEQ_UI_BUTTON_GP6:
case SEQ_UI_BUTTON_GP7:
// fire preset
SEQ_CORE_BPM_Update(seq_core_bpm_preset_tempo[seq_core_bpm_preset_num], seq_core_bpm_preset_ramp[seq_core_bpm_preset_num]);
return 1;
case SEQ_UI_BUTTON_GP8:
// enter preset selection page
SEQ_UI_PageSet(SEQ_UI_PAGE_BPM_PRESETS);
return 1;
}
// re-use encoder handler - only select UI item, don't increment
return Encoder_Handler((int)button, 0);
}
// remaining buttons:
switch( button ) {
case SEQ_UI_BUTTON_Select:
case SEQ_UI_BUTTON_Right:
if( ++ui_selected_item >= NUM_OF_ITEMS )
ui_selected_item = 0;
return 1; // value always changed
case SEQ_UI_BUTTON_Left:
if( ui_selected_item == 0 )
ui_selected_item = NUM_OF_ITEMS-1;
else
--ui_selected_item;
return 1; // value always changed
case SEQ_UI_BUTTON_Up:
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, 1);
case SEQ_UI_BUTTON_Down:
return Encoder_Handler(SEQ_UI_ENCODER_Datawheel, -1);
}
return -1; // invalid or unsupported button
}
/////////////////////////////////////////////////////////////////////////////
// Local Display Handler function
// IN: <high_prio>: if set, a high-priority LCD update is requested
/////////////////////////////////////////////////////////////////////////////
static s32 LCD_Handler(u8 high_prio)
{
if( high_prio )
return 0; // there are no high-priority updates
// layout:
// 00000000001111111111222222222233333333330000000000111111111122222222223333333333
// 01234567890123456789012345678901234567890123456789012345678901234567890123456789
// <--------------------------------------><-------------------------------------->
// Mode Preset Tempo Ramp Fire Preset MClk In/Out Ext. Tap
// Master 1 140.0 1s Preset Page USB1 I:on O:off Restart Tempo
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 0);
SEQ_LCD_PrintString(" Mode Preset Tempo Ramp Fire Preset MClk In/Out ");
SEQ_LCD_PrintString(seq_core_state.EXT_RESTART_REQ ? "Ongoing" : " Ext. ");
SEQ_LCD_PrintString(" Tap ");
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 1);
if( ui_selected_item == ITEM_MODE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(6);
} else {
const char mode_str[3][7] = { " Auto ", "Master", "Slave "};
SEQ_LCD_PrintString((char *)mode_str[SEQ_BPM_ModeGet()]);
}
SEQ_LCD_PrintSpaces(2);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_PRESET && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(2);
} else {
SEQ_LCD_PrintFormattedString("%2d", seq_core_bpm_preset_num+1);
}
SEQ_LCD_PrintSpaces(3);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_BPM && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(5);
} else {
float bpm = seq_core_bpm_preset_tempo[seq_core_bpm_preset_num];
SEQ_LCD_PrintFormattedString("%3d.%d", (int)bpm, (int)(10*bpm)%10);
}
SEQ_LCD_PrintSpaces(2);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_RAMP && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
float ramp = seq_core_bpm_preset_ramp[seq_core_bpm_preset_num];
SEQ_LCD_PrintFormattedString("%2ds", (int)ramp);
}
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_PrintString(" Preset Page ");
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_MCLK_PORT && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintString(SEQ_MIDI_PORT_ClkNameGet(SEQ_MIDI_PORT_ClkIxGet(selected_mclk_port)));
}
SEQ_LCD_PrintSpaces(1);
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_PrintString("I:");
if( ui_selected_item == ITEM_MCLK_IN && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
s32 status = SEQ_MIDI_ROUTER_MIDIClockInGet(selected_mclk_port);
if( !SEQ_MIDI_PORT_ClkCheckAvailable(selected_mclk_port) )
status = -1; // MIDI In port not available
switch( status ) {
case 0: SEQ_LCD_PrintString("off"); break;
case 1: SEQ_LCD_PrintString("on "); break;
default: SEQ_LCD_PrintString("---");
}
}
SEQ_LCD_PrintSpaces(1);
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_PrintString("O:");
if( ui_selected_item == ITEM_MCLK_OUT && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
s32 status = SEQ_MIDI_ROUTER_MIDIClockOutGet(selected_mclk_port);
if( !SEQ_MIDI_PORT_ClkCheckAvailable(selected_mclk_port) )
status = -1; // MIDI Out port not available
switch( status ) {
case 0: SEQ_LCD_PrintString("off"); break;
case 1: SEQ_LCD_PrintString("on "); break;
default: SEQ_LCD_PrintString("---");
}
}
SEQ_LCD_PrintSpaces(3);
// DIN Sync moved to CV configuration
SEQ_LCD_PrintSpaces(3+4);
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_PrintString("Restart Tempo");
return 0; // no error
}
/////////////////////////////////////////////////////////////////////////////
// Local exit function
/////////////////////////////////////////////////////////////////////////////
static s32 EXIT_Handler(void)
{
s32 status = 0;
if( store_file_required ) {
// write config file
MUTEX_SDCARD_TAKE;
if( (status=SEQ_FILE_C_Write(seq_file_session_name)) < 0 )
SEQ_UI_SDCardErrMsg(2000, status);
MUTEX_SDCARD_GIVE;
store_file_required = 0;
}
return status;
}
/////////////////////////////////////////////////////////////////////////////
// Local Display Handler function
// IN: <high_prio>: if set, a high-priority LCD update is requested
/////////////////////////////////////////////////////////////////////////////
static s32 LCD_Handler(u8 high_prio)
{
if( high_prio )
return 0; // there are no high-priority updates
// layout:
// 00000000001111111111222222222233333333330000000000111111111122222222223333333333
// 01234567890123456789012345678901234567890123456789012345678901234567890123456789
// <--------------------------------------><-------------------------------------->
// Metronome Port Chn. Meas.Note BeatNote
// off Def. #10 C#1 C#1
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 0);
SEQ_LCD_PrintString("Metronome Port Chn. Meas.Note BeatNote ");
SEQ_LCD_PrintSpaces(40);
///////////////////////////////////////////////////////////////////////////
SEQ_LCD_CursorSet(0, 1);
SEQ_LCD_PrintSpaces(3);
if( ui_selected_item == ITEM_ENABLE && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintString(seq_core_state.METRONOME ? "on " : "off");
}
SEQ_LCD_PrintSpaces(4);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_PORT && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(4);
} else {
SEQ_LCD_PrintString(SEQ_MIDI_PORT_OutNameGet(SEQ_MIDI_PORT_OutIxGet(seq_core_metronome_port)));
}
SEQ_LCD_PrintSpaces(1);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_CHANNEL && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
if( !seq_core_metronome_chn )
SEQ_LCD_PrintString("---");
else
SEQ_LCD_PrintFormattedString("#%2d", seq_core_metronome_chn);
}
SEQ_LCD_PrintSpaces(5);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_NOTE_M && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintNote(seq_core_metronome_note_m);
}
SEQ_LCD_PrintSpaces(7);
///////////////////////////////////////////////////////////////////////////
if( ui_selected_item == ITEM_NOTE_B && ui_cursor_flash ) {
SEQ_LCD_PrintSpaces(3);
} else {
SEQ_LCD_PrintNote(seq_core_metronome_note_b);
}
SEQ_LCD_PrintSpaces(4 + 40);
return 0; // no error
}